+ All Categories
Home > Documents >  · After Initialization (3 minutes), set the Band Switch to VAC, press and hold the Manual ON/OFF...

 · After Initialization (3 minutes), set the Band Switch to VAC, press and hold the Manual ON/OFF...

Date post: 26-Mar-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
Transcript
Page 1:  · After Initialization (3 minutes), set the Band Switch to VAC, press and hold the Manual ON/OFF Button for 6 seconds until the Load turns on. Release the button within the next
Page 2:  · After Initialization (3 minutes), set the Band Switch to VAC, press and hold the Manual ON/OFF Button for 6 seconds until the Load turns on. Release the button within the next

Recommended