European Welding & Cutting days 2019 Day 1 – 4.6. 2019 Park Inn Hotel
11:30
12:00–13:00
13:00-13:30
13:30-14:00
14:00-14:30
14:30-14:50
14:50-15:20
15:20-15:50
15:50-16:20
16:20-16:40
16:40-17:10
17:10-17:40
Start of the registration
Lunch
Jan Kamenický / Vítězslav Lukáš / ABB
Welcome and introduction
Jörgen Sall / ESAB
FSW in automotive with focus on robotic applications
Henrik Rohde / Lincoln Electric
Lincoln Electric Total Solutions - Power Wave
Technology, Processes, Software and Industry 4.0
Coffee break
Günter Ambrosy / TRUMPF
Laser Applications in E-Mobility
Mattias Allring / ABB
Unlocking production efficiency in the digital world
Jürgen Bruckner / Fronius
Aluminium applications: Maximize the output with the Robacta Drive System
Coffee break
Sujit Chatterjee / Jaguar Land Rover
Fusion welding of Aluminium at JLR
Tomáš Pasovský / Atlas Copco
Joining technologies in E-Mobility
Mario Savelsberg / CleanLaser
Laser cleaning
Wrap up
Bus transportation to the evening venue – sharp time
Dinner / River boat restaurant
—Agenda
17:40-18:10
18:10
19:30 – 22:30
19:00
Day 2
5.6. 2019 - W&C Application Center in Vestec
8.30 - 9.00
9:00-9:15
9:15-9:45
9:45-10:15
10:15-10:45
10:45–11:15
11:15-13:30
13:30-14:30
14:30-15:00
15:00-16:00
Transportation and arrival to Vestec
Jiří Hallman / ABB
Application center introduction
Klaus Krastel / IPG lasers
Revolution of Fiber Laser Materials Processing
Alexander Dillenz / Edevis
Quality monitoring by active thermovision
Jens Schwerdtner / HighYag
Robot based laser processes and applications for
aluminium welding with HighYag Laser Processing Heads
Coffee break
Workshops
Lunch
Wrap Up
Optional time for individual agenda – exhibits open
Workshops: Start of the workshops at 11:15; 12:00; 12:45
1) ABB - Press automation solutions
2) ABB - Robot studio – complete station and simulation of real part
3) ABB - Flex Spot virtual
Special workshops placed next to exhibits: Starting at 11:15 and repeating every 30 minutes
1) Atlas Copco - Joining technologies in E-Mobility
2) Edevis - Quality monitoring by active thermovision
3) ABB Spot pack – digitalization
4) Flex Inspect – quality control
—Agenda