AGRICULTURAL PRODUCTS JOHN DEERE LOADERS 512 …€¦ · AGRICULTURAL PRODUCTS JOHN DEERE LOADERS...

66 In. (1680 mm) General Purpose BucketHoses, Valve and Power Beyond Kit for

5103, 5203, 5303, 5403, 5045D, 5055D,5065E and 5075E 2WD Tractors(refer to serial number compatibility)

Quik-Change AttachmentMounting Frame for 2WD Tractors

5105, 5205, 5045D and 5055D

Refer to Sales Manual for specifications and Tractor requirements and/or recommendations. Tractors with rollover protection and seatbelts arerecommended for Loader operation.

CODEATTACHMENTIDENTIFIER DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

Select One Code From Each Required Category

BASE MACHINEEX-WORKS Laredo, Texas; Marinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,Ontario

2362P 512 Standard Loader 5,017.00

HYDRAULIC HOSES AND COUPLERS1002 2 Function Single Lever Independent Loader Valve and Hose Kit

For 5105, 5205, 5200, 5210, 5220, 5300, 5310 and 5320 2WD Tractors.Same Price

1003 2 Function Hoses and PartsFor 5103, 5203, 5303, 5403, 5105, 5205, 5220, 5320, 5045D, 5055D, 5065E and 5075E 2WDTractors Equipped with Mid-Mounted SCVs.

-571.00

1005 2 Function Single Lever Independent Loader Valve, Hoses andPower Beyond ConnectionFor 5103 Tractors (SN PY5103U013641 and above), 5203 Tractors (SN PY5203U005570 andabove), 5303 Tractors (SN PY5303U007754 and above) and 5403 Tractors (SNPY5403U000735 and above), 5045D, 5055D, 5065E and 5075E 2WD Tractors.

In Base Price

1095 Less Hydraulic Controls -758.00

TRACTOR MOUNTING FRAMES2000 Mounting Frame

For 5103, 5203, 5303, 5200, 5210, 5220, 5300, 5310, 5320, 5403, 5065E and 5075E 2WDTractors.

170.00

2010 Mounting FrameFor 5105, 5205, 5045D and 5055D 2WD Tractors.

In Base Price

BALLAST BOXRear Tractor Ballast is required for Tractor stability. See Loader Sales Manual or Operator'sManual for Ballast recommendations.

3000 Ballast Box 216.00

3010 Ballast Box with Extension 320.00

3020 Large Ballast Box 909.00

AGRICULTURAL PRODUCTSJOHN DEERE LOADERS

512 Standard LoaderEquipment for Base Machine

06 May 2011 US & Canada9-Loaders-00300- 1


SUGGESTEDLIST PRICE

USD ($)

BALLAST BOX ...Continued...

3095 Less Ballast Box In Base Price

BUCKETS8415 66 In. (1680 mm) General Purpose Bucket In Base Price

8425 73 In. (1850 mm) General Purpose Bucket (John Deere Carrier) 115.00

8995 Less Bucket -698.00

ATTACHMENTS - ORDER AS DESIRED

Guards:9010 Hood Guard

For 5103, 5203, 5303, 5403, 5105, 5205, 5200, 5210, 5220, 5300, 5310 and 5320 2WDTractors.

180.00

9014 Hood GuardFor 5045D, 5055D, 5065E and 5075E 2WD Tractors.

231.00

9036 Brush GuardFor Code 9014.

111.00

Miscellaneous:9050 Bucket Level Indicator 52.00

9070 Competitive Attachment Adapter Brackets - 1 Pair 281.00

9080 Parking Stands and Couplers 300.00

9095 Australian Code of Practice Kit No Charge

9098 Spanish Operator's Manual and Decal Kit No Charge

9099 French Operator's Manual and Decal Kit No Charge

ATTACHMENTS FOR FIELD CONVERSION

Ballast Box:BW15074 Ballast Box Extension 114.00

Buckets:BW15566 66 In. (1680 mm) General Purpose Bucket

Compatible with John Deere Carrier.768.00

BW15573 73 In. (1850 mm) General Purpose BucketCompatible with John Deere Carrier.

894.00


512 Standard LoaderContinued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...

Guards:BW15683 Brush Guard

For Code 9014.111.00

BW13780 Hood GuardFor 5103, 5203, 5303, 5403, 5105, 5205, 5200, 5210, 5220, 5300, 5310 and 5320 2WDTractors.

180.00

BW15817 Hood GuardFor 5045D, 5055D, 5065E and 5075E 2WD Tractors.

231.00

Hydraulic Controls:BW15281 2 Function Hoses and Parts for Tractors

with Mid-Mounted SCV Factory InstalledFor 5105, 5205, 5220, 5320, 5045D, 5055D, 5065E and 5075E 2WD Tractors.

206.00

BW15306 2 Function Single Lever Independent LoaderValve, Hoses and Power Beyond KitNorth America -For 5103 (SN PY5103U013640 and below), 5203 (SN PY5203U005569 andbelow), 5303 (SN PY5303U007753 and below), and 5403 (SN PY5403U000734 and below)2WD Tractors.Region 2 -For 5003 Series Tractors.

787.00

BW15756 2 Function Single Lever Independent Loader Valve and HosesFor 5105, 5205, 5200, 5210, 5220, 5300, 5310 and 5320 2WD Tractors.

834.00

BW15758 2 Function Single Lever Independent Loader Valve, Hoses andPower Beyond ConnectionFor 5103 Tractors (SN PY5103U013641 and above), 5203 Tractors (SN PY5203U005570 andabove), 5303 Tractors (SN PY5303U007754 and above) and 5403 Tractors (SNPY5403U000735 and above). For 5045D, 5055D, 5065E and 5075E 2WD Tractors.

834.00

Miscellaneous:BW15389 Australian Code of Practice Kit No Charge

BW15181 Bucket Level Indicator 52.00

BW13919 Competitive Attachment Adapter Brackets - 1 Pair 281.00

BW15374 French Operator's Manual and Decal Kit No Charge

BW15502 Parking Stands and Couplers 300.00

BW15375 Spanish Operator's Manual and Decal Kit No Charge

Tractor Mounting Frames:BW15858 Mounting Frame, Plates and Parts

For 5103, 5203, 5303, 5200, 5210, 5220, 5300, 5310, 5320, 5403, 5065E and 5075E 2WDTractors.

187.00






THIS PAGE IS INTENTIONALLY LEFT BLANK


Parking StandsBucket Level IndicatorOil Line CoverMounting Frame2 Function Mid-Mounted M-ICV and Hoses2 Function Quick CouplersJohn Deere 500 Attachment Carrier

66" General Purpose Bucket


SUGGESTEDLIST PRICE

USD ($)



2451P 553 Standard Loader 5,647.00

VALUE PACKAGE CONFIGURATIONS0595 Custom Configuration

Requires manual selection of order codes necessary to complete a machine configuration.In Base Price

TRACTOR MOUNTING FRAMESRefer to the Loader and Tractor Compatibility Chart in the Agricultural Sales Manual forApproved Loader compatibility.

1000 Mounting FrameFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.Note: Not physically compatible with front tires larger than 11.2-24.

105.00

1005 Mounting FrameFor 5225, 5325 and 5325N 2WD and MFWD Tractors.Note: Not physically compatible with front tires larger than 11.2-24.

105.00

1010 Mounting FrameFor 5425, 5425N, 5525, 5525N, 5625, 5603, 5083E Limited, 5083EN, 5093E Limited, 5093EN,5101E Limited and 5101EN 2WD and MFWD Tractors.Note: Not physically compatible with front tires larger than 11.2-24.

105.00

1015 Mounting FrameFor 5103, 5203, 5303, 5403, 5200, 5200N, 5210, 5210N, 5220, 5300, 5300N, 5310, 5310N,5320, 5320N, 5400, 5400N, 5045E, 5055E, 5065E and 5075E 2WD and MFWD Tractors.Region 3 - For 5075E Tractors.

In Base Price

1020 Mounting FrameFor 5410, 5410N, 5420, 5420N, 5500, 5500N, 5510, 5510N, 5520, 5520N 2WD and MFWDTractors.Region 3 - For 5078E and 508E Tractors.

210.00

1025 Mounting FrameFor 5105, 5205, 5045D, and 5055D 2WD and MFWD Tractors.

Same Price

1095 Less Mounting Frame -788.00


553 Standard LoaderEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

HYDRAULIC CONTROLS2000 2 Function Hoses and Couplers

For 5000, 5003, 5005, 5010, 5020, 5025, 5025N Series Tractors with mid-mounted couplers.For 5045D and 5055D 2WD Tractors.For 5045E, 5055E, 5065E and 5075E 2WD and MFWD Tractors with mid-mounted couplers.For 5083E Limited, 5083EN, 5093E Limited, 5093EN, 5101E Limited and 5101EN MFWDTractors with mid-mounted couplers.

In Base Price

2005 3 Function Oil Lines and Parts with Mid-Mount Couplers and HosesFor 5E Limited Tractors with Mid-Mounted Couplers.

265.00

2010 2 Function Hoses and CouplersFor 5065M, 5075M, 5085M, 5095M and 5105M 2WD and MFWD Tractors with mid-mountedcouplers.

16.00

2020 2 Function Independent Control Valve, Hoses and CouplersFor 5045E, 5055E, 5065E and 5075E 2WD and MFWD Tractors.For 5103 Tractors (SN PY5103U013641 and above).For 5203 Tractors (SN PY5203U005570 and above).For 5303 Tractors (SN PY5303U007754 and above).For 5403 Tractors (SN PY5403U000735 and above).Region 3 - For 5075E, 5078E and 5085E Tractors.

509.00

2030 2 Function Hoses and Multi-CouplerFor 5065M, 5075M, 5085M, 5095M and 5105M 2WD and MFWD Tractors.

357.00

2040 3 Function Hoses, Oil Lines and Multi-CouplersFor 5065M, 5075M, 5085M, 5095M and 5105M 2WD and MFWD Tractors.For each additional Third Function attachment, order (1) AW33653 Third Function/GrappleMulti-Coupler half from Service Parts.

1,029.00

2095 Less Hydraulic Hoses and Couplers -226.00

BALLAST BOXRear ballast is required for Tractor stability. See Loader Operator's Manual for ballastrecommendations.


4010 Small Ballast Box 216.00

4020 Small Ballast Box and Extension 320.00


CARRIER7000 Global Carrier 104.00

7010 John Deere 500 Attachment Carrier In Base Price

7020 Skid Steer Carrier 236.00

7095 Less Carrier -342.00

BUCKETS8210 73 In. (1850 mm) Bucket (Global Carrier)

Global Style Buckets, order with Code 7000 only.116.00





SUGGESTEDLIST PRICE

USD ($)

BUCKETS ...Continued...8215 73 In. (1850 mm) Heavy Duty Bucket (Global Carrier)

Global Style Buckets, order with Code 7000 only.288.00

8220 85 In. (2150 mm) Bucket (Global Carrier)Global Style Buckets, order with Code 7000 only.

276.00

8415 66 In. (1680 mm) General Purpose Bucket (JD Carrier)John Deere 500 Style Bucket, order with Code 7010.

In Base Price

8425 73 In. (1850 mm) General Purpose Bucket (JD Carrier)John Deere 500 Style Bucket, order with Code 7010.

115.00

8435 73 In. (1850 mm) Bale Grapple BucketCompatible with JD Carrier, order with Code 7010.Availability Limited to Factory Inventory.

2,168.00




For 5045D, 5055D, 5045E, 5055E, 5065E and 5075E 2WD and MFWD Tractors.231.00

9035 Hood GuardFor 5065M, 5075M, 5085M, 5095M, 5095MH and 5105M 2WD and MFWD Tractors.Not Compatible with Narrow Tractors or Low Crop Tractors with ROPS folded forward.

231.00

9036 Brush GuardFor Code 9014 and 9035.

111.00

9037 Hood GuardFor 5225, 5325, 5325N, 5425, 5425N, 5525, 5525N, 5625, 5603, 5083E Limited, 5083EN,5093E Limited, 5093EN, 5101E Limited and 5101EN Tractors.Not Compatible with Narrow Tractors or Low Crop Tractors with ROPS folded forward.

225.00

9039 Hood GuardFor 5103, 5203, 5303, 5403, 5105, 5205, 5200, 5210, 5220, 5300, 5300N, 5310, 5310N, 5320,5320N, 5400 and 5400N Tractors.

180.00

9038 Hood GuardFor 5410, 5410N, 5420, 5420N, 5500, 5500N, 5510, 5510N, 5520 and 5520N Tractors.

213.00

Stationary Fenders:9030 Stationary Fenders (Quik-Tach)

Attach to Loader Mounting Frames.For Code 1000.

457.00

Loader Suspension System:9048 Loader Suspension System with Manual On/Off Lever

For 5065M, 5075M, 5085M, 5095M, 5105M 2WD and MFWD Tractors.462.00

9049 Loader Suspension System with Operator Station On/Off SwitchFor 5065M, 5075M, 5085M, 5095M, 5105M 2WD and MFWD Tractors.

809.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9052 Loader Suspension System

For 5025 series, 5E Limited series, and 5603 Tractors.583.00

Cutting Edges:9078 66 In. (1680 mm) Replaceable Bucket Cutting Edge with Hardware

For Code 8415.145.00

9079 73 In. (1850 mm) Replaceable Bucket Cutting Edge with HardwareFor Code 8425.Trim as required to fit smaller buckets.

161.00

9080 85 In. (2150 mm) Replaceable Bucket Cutting Edge with HardwareCompatible with Code 8215.Compatible with Code 8220 (requires holes to be drilled in bucket).

275.00

Tooth Bars:9055 66 In. (1680 mm) Tooth Bar

For Code 8415.Not compatible with Code 9078.

451.00

9056 73 In. (1850 mm) Tooth Bar for BucketFor Codes 8425 and 8215.Not compatible with Code 9079.

462.00

Miscellaneous:9070 Competitive Attachment Adapter Brackets - 1 Pair

To assist in making competitive attachments compatible with the JD500 attachment carrier.281.00

9075 Digging TeethFor Code 8215.Not Compatible with Codes 9078, 9079 or 9080.

231.00




ATTACHMENTS FOR FIELD CONVERSIONPlease see 'Attachments for Field Conversion - Loaders' at the end of the loader section forprices on individual attachments.

Ballast Box:BW15073 Ballast Box 238.00

BW00488 Ballast Box with Extension 342.00

BW15852 Large Ballast Box 1,000.00





SUGGESTEDLIST PRICE

USD ($)



Compatible with John Deere Carrier.768.00

BW15573 73 In. (1850 mm) General Purpose BucketCompatible with John Deere Carrier.

894.00

BW15544 73 In. (1850 mm) Global Heavy Duty BucketCompatible with Global Carrier.

1,085.00

BW15543 73 In. (1850 mm) Global Materials Bucket 895.00

BW15545 85 In. (2150 mm) Global Materials BucketCompatible with Global Carrier.

1,071.00

BW14350 85 In. (2150 mm) High-Volume BucketCompatible with John Deere 500 Style Carriers only.

1,058.00

Carriers:BW15628 Global Carrier 491.00

BW15624 John Deere 500 Attachment Carrier 376.00

BW15626 Skid Steer Style Carrier 636.00

Cutting Edges:BW15819 66 In. (1680 mm) Replaceable Bucket Cutting Edge with Hardware

For Code 8415.145.00

BW14763 73 In. (1850 mm) Replaceable Bucket Cutting Edge with HardwareFor Code 8425.Trim as required to fit smaller buckets.

161.00

BW14267 85 In. (2150 mm) Replaceable Bucket Cutting Edge with HardwareCompatible with Code 8215.Compatible with Code 8220 (requires holes to be drilled in bucket).

275.00

Guards:BW15683 Brush Guard 111.00

BW13780 Hood GuardFor 5103, 5203, 5303, 5403, 5105, 5205, 5200, 5210, 5220, 5300, 5300N, 5310, 5310N, 5320,5320N, 5400 and 5400N Tractors.

180.00

BW14254 Hood GuardFor 5410, 5410N, 5420, 5420N, 5500, 5500N, 5510, 5510N, 5520 and 5520N Tractors.

213.00

BW15084 Hood GuardFor 5225, 5325, 5325N, 5425, 5425N, 5525, 5525N, 5625, 5603, 5083E Limited, 5083EN,5093E Limited, 5093EN, 5101E Limited and 5101EN Tractors.Not Compatible with Narrow Tractors or Low Crop Tractors with ROPS folded forward.

225.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW15817 Hood Guard

For 5045D, 5055D, 5045E, 5055E, 5065E and 5075E 2WD and MFWD Tractors.231.00

BW15657 Hood GuardFor 5065M, 5075M, 5085M, 5095M, 5095MH and 5105M 2WD and MFWD Tractors.Not Compatible with Narrow Tractors or Low Crop Tractors with ROPS folded forward.

231.00

Hydraulic Controls:BWA1505 2 Function Hoses and Multi-Coupler

For 5065M, 5075M, 5085M, 5095M and 5105M 2WD and MFWD Tractors.

Kit includes the following components:1 - BW15853 2 Function Frame-Mounted Multi-Coupler1 - BW15693 Hoses and Parts (2 Function)

641.00

BWA1508 2 Function Independent Control Valve, Hoses and CouplersFor 5003 Series Tractors and 5045E, 5055E, 5065E and 5075E 2WD and MFWD Tractors.

Kit includes the following components:1 - BW15856 Independent Control Valve (2 Function)1 - BW16117 Hoses, Couplers and Parts (2 Function)

809.00

BWA1506 3 Function Hoses, Oil Lines and Multi-CouplerFor 5065M, 5075M, 5085M, 5095M and 5105M 2WD and MFWD Tractors.

Kit includes the following components:1 - BW15854 3 Function Frame-Mounted Multi-Coupler and Front Boom-MountedMulti-Coupler1 - BW15855 Hoses and Parts (3 Function)1 - BW15656 Third Function Oil Lines and Parts

1,381.00

BWA1559 3 Function Oil Lines and Parts with Mid-Mount Couplers and HosesFor 5E LTD Tractors with Mid-Mounted Couplers.

Kit includes the following components:1 - BW15656 3 Function Oil Lines and Parts1 - BW15637 Hoses & Mid-Mount Couplers (2 Function)1 -BW16131 Hoses & Mid-Mount Couplers (Third Function)

540.00

BWA1561 3 Function Oil Lines and Parts with Mid-Mount Couplers and HosesKit includes the following components:1 - BW15656 3 Function Oil Lines and Parts1 -BW16131 Hoses and Mid-Mount Couplers (Third Function)

292.00

BW15637 Hoses and Couplers (2 Function)For 5000, 5D, 5E, 5EN 5E Limited and 6D series tractors already equiped with M-ICV.

249.00

BW15818 Hoses and Couplers (2 Function)For 5M Series Tractors.

266.00

Loader Suspension System:BW15864 Loader Suspension System

For 5025 series, 5E Limited series, and 5603 tractors.583.00

BW15816 Loader Suspension System with Manual On/Off LeverFor 5065M, 5075M, 5085M, 5095M, 5105M 2WD and MFWD Tractors.

462.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW15797 Loader Suspension System with Operator Station On/Off Switch

For 5065M, 5075M, 5085M, 5095M, 5105M 2WD and MFWD Tractors.809.00

Miscellaneous:BW15358 73 In. (1850 mm) Bale Grapple Bucket

Compatible with JD Carrier. Availability Limited to Factory Inventory.3,098.00

BW15389 Australian Code of Practice Kit No Charge

BW13919 Competitive Attachment Adapter Brackets - 1 PairTo assist in making competitive attachments compatible with the JD500 attachment carrier.

281.00

BW15763 Digging TeethFor Code 8215.Not Compatible with Codes 9078, 9079 or 9080.

231.00



Stationary Fenders:BW15741 Stationary Fenders (Quik-Tach)

Attach to Loader Mounting Frames.For Code 1000.

457.00

Tooth Bars:BW15589 66 In. (1680 mm) Tooth Bar


451.00

BW15228 73 In. (1850 mm) Tooth Bar for BucketFor Codes 8425 and 8215.Not compatible with Code 9079.

462.00

Tractor Mounting Frames:BW15560 Mounting Frame

For 5225 and 5325 2WD and MFWD Tractors.Note: Not physically compatible with front tires larger than 11.2-24.

982.00

BW15561 Mounting FrameFor 5425, 5525, 5625, 5603, 5083E Limited, 5093E Limited, and 5101E Limited Tractors.Note: Not physically compatible with front tires larger then 11.2-24.

982.00

BW15564 Mounting FrameFor 5105, 5205, 5045D, and 5055D 2WD and MFWD Tractors.

867.00

BW15878 Mounting FrameFor 5065M, 5075M, 5085M, 5095M and 5105M 2WD and MFWD Tractors.Not physically compatible with front tires larger than 11.2-24.

982.00

BW16115 Mounting FrameFor 5103, 5203, 5303, 5403, 5200, 5200N, 5210, 5210N, 5220, 5300, 5300N, 5310, 5310N,5320, 5320N, 5400, 5400N, 5045E, 5055E, 5065E and 5075E 2WD and MFWD Tractors.

867.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW16116 Mounting Frame

For 5410, 5420, 5500, 5510 and 5520 2WD and MFWD Tractors.1,098.00




Parking StandsBucket Level IndicatorOil Line CoverMounting FrameJoystick, (SLC)

2 Function Mid-Mounted M-ICV and Hoses2 Function Quick CouplersGlobal Carrier

73" Global Materials Bucket


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Laredo Texas; Marinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,Ontario

2461P 563 Non-Self-Leveling Loader 8,904.00




1000 Mounting FrameFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.

-486.00

1005 Mounting FrameFor 5225 and 5325 2WD and MFWD Tractors.

-486.00

1010 Mounting FrameFor 5425, 5525, 5625, 5603, 5083E Limited, 5093E Limited and 5101E Limited Tractors.

-486.00

1015 Mounting FrameFor 5200, 5210, 5220, 5300, 5310, 5320 and 5400 2WD and MFWD Tractors.

-591.00

1020 Mounting FrameFor 5410, 5420, 5500, 5510 and 5520 2WD and MFWD Tractors.Region 3: For 5078E, 5085E (on 563NSL only).

-381.00

1040 4 CYL. Mounting FrameFor 6000, 6010, 6020, 6030 Series, 6030 Premium Series and 6405, 6215, 6415 Tractors. ForRegion 2: 5080R, 5090R, 5100R Premium Tractors, 5070M 4WD, 5085M 4WD, 5090M and5100M Tractors.Region 3 - For 6110E/J Tractors.Includes Toolbox bracket.

In Base Price

1050 6 CYL. Mounting FrameFor 7030 Series, 7030 Premium Series, 7200, 7210, 7400, 7410, 6615, 6715, 7220, 7320, 7420(2WD only) Tractors.Region 3 - For 6125E/J Tractors.Includes Toolbox bracket.

Same Price


563 Non-Self-Leveling LoaderEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

TRACTOR MOUNTING FRAMES ...Continued...For Tractors with 315L Fuel Tank, a different Toolbox Bracket is required. Order (1) W53181Bracket, (2) 03M7192 Bolts, (2) 14M7296 Nuts, (2) 19M7608 Screws and (2) 24M7053Washers from Service Parts.

1060 Mounting FrameFor 6100D, 6115D, 6130D and 6140D Tractors.Region 3 - For 6110D and 6125D Tractors.

-382.00

1095 Less Mounting FrameOrder when Loader Ready Package Codes have been ordered on the Tractor.

-1,379.00

HYDRAULIC CONTROLSSee the Agricultural Sales Manual for Tractor Hydraulic Requirements.

Loader Prep Package Options for the Tractors Already Equipped with ControlValve and Quick Couplers:

2000 2 Function - Hoses and CouplersFor 5000, 5010, 5020, 5025, 5E Limited and 6D Series Tractors and 5603 Tractor withMid-Mounted Couplers.For Region 2: 5080R, 5090R, 5100R, 5070M 4WD, 5080M 4WD, 5090M and 5100M Tractorswith Mid-Mounted Couplers.Order Code 3095 in the Couplers section.

-1,392.00

2007 3 Function Oil Lines and Parts with Mid-Mount Couplers and HosesFor 5E LTD Tractors with Mid-Mounted Couplers.

-1,183.00

2010 2 Function - Hoses and CouplersFor 5065M, 5075M, 5085M, 5095M and 5105M and 5105ML 2WD and MFWD Tractors withMid-Mounted Couplers.Order Code 3095 in the Couplers section.(For 3 Function refer to coupler section, Code 3010).

-1,376.00

Loader Ready Package options for 6030 Series and 6030 Premium SeriesTractors(SLC, Mid-Mounted M-ICV or E-ICV, and Mid-Mounted Multi-Coupler Tractor Halfordered with Tractor):

2050 2 Function - Includes Hoses and Multi-Coupler HalfOrder Code 3095 in the Couplers section.

-1,300.00

2052 3 Function - Includes Hoses, Multi-Coupler Loader Half andThird Function PartsOrder Code 3095 in the Couplers section.

-752.00

Loader Prep Package options for 6020, 6030, 7030 Series, 6030 Premium, 7030PremiumSeries, 7220, 7320, 7420, 6405, 6215, 6415, 6615 and 6715 Tractors(SLC and Mid-Mounted M-ICV or E-ICV ordered with Tractor):

2060 2 Function - Includes Hoses and Parts -1,433.00

2068 3 Function - Includes Hoses and Parts and Third Function Components(Not for 6015 Series Tractors)

-1,175.00


563 Non-Self-Leveling LoaderContinued



SUGGESTEDLIST PRICE

USD ($)

HYDRAULIC CONTROLS ...Continued...

Single Lever Control with Mid-Mounted M-ICV Loader Valves for 6D SeriesTractors:For OOS Tractors, order (1) RE19285 Joystick Bracket from Parts.

2063 2 Function SLC and Mid-Mount M-ICV for Field InstallationLoader must be equipped with Mid-Mount Quick Couplers, select Code 3020.

-532.00

2065 3 Function SLC and Mid-Mount M-ICV for Field Installation 790.00

Single Lever Control with Mid-Mounted M-ICV Loader Valves for6030 Premium and 7030 Premium Tractors:

2070 2 Function SLC and Mid-Mount M-ICV Field Installation In Base Price

2072 3 Function SLC and Mid-Mount M-ICV Field Installation 660.00

Single Lever Control with Mid-Mounted M-ICV for 6030 and 7030 Series Tractors:2073 2 Function SLC and Mid-Mount M-ICV for Field Installation 233.00


Single Lever Control with Mid-Mounted M-ICV Loader Valves for6000, 6010, 6020 Series, 7220, 7320, 7420, 6405, 6215, 6415,6605, 6615 and 6715 Series Tractors (SVC's Not Required):


2076 3 Function SLC and Mid-Mount M-ICV Field Installation 1,151.00

Single Lever Control with Rear-Mounted Mechanical Loader Valves for7000 and 7010 Series Tractors:

2080 2 Function -380.00

2082 3 Function (Includes Rear Mounted EH Third Function Valve) 832.00

Less Hydraulic Controls:2095 Less Hydraulic Controls -1,618.00

COUPLERSFor Codes 2000, 2010, 2050 and 2052, order Code 3095.For Codes 3000 and 3010, order Code 2095.

3000 2 Function Hoses and Multi-Coupler for 5M Series TractorsFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.

363.00

3010 3 Function Hoses, Multi-Coupler, Third Function Lines andThird Function Multi-Coupler for 5M Series TractorsFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.

982.00

3020 2 Function Mid-Mount Couplers In Base Price





SUGGESTEDLIST PRICE

USD ($)

COUPLERS ...Continued...3030 3 Function Mid-Mount Couplers and Third Function Couplers 176.00

3050 2 Function Multi-Coupler 283.00

3060 3 Function Multi-Coupler and Third Function Multi-CouplerFor each additional Third Function Attachment, order (1) AW33653Third Function Multi-Coupler Attachment Half from Serivce Parts. The hoses from theattachment to the Third Function Multi-Coupler Attachment Half will need female fittings toaccept the AW33653.

700.00

3095 Less Couplers -220.00

BALLAST BOXRear ballast is required for tractor stability. See Loader Operator's Manual for ballastrecommendations.



4020 Small Ballast Box with Extension 320.00


CARRIER7000 Global Carrier In Base Price

7010 John Deere 500 Style CarrierNot compatible with 6D, 6000, or 7000 Series Tractors.

-170.00

7020 Skid Steer Style Carrier 191.00

7030 John Deere 600/700 Style CarrierNot compatible with 5000 Series Tractors.

-134.00


BUCKETS8001 73 In. (1850 mm) Global Materials Bucket

Compatible with Code 7000, Global Carrier. Not compatible with grapples.In Base Price



Bale and Silage Handling Equipment:9054 Five Tine Round Bale/Silage Grapple with Grille

Requires Code 9014 or 9029.2,380.00

Buckets:9011 73 In. (1850 mm) Global Heavy Duty Bucket

Global Bucket - Compatible with Code 7000, Global Carrier, only.Not compatible with grapples.

1,085.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9012 85 In. (2150 mm) Global Materials Bucket


1,071.00

9013 85 In. (2150 mm) Global Heavy Duty BucketGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Not compatible with grapples.

1,353.00

9014 85 In. (2150 mm) Global Heavy Duty Bucket with Grapple BracketsGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Compatible with Code 9054 grapple.

1,471.00

9015 91 In. (2300 mm) Global High Volume BucketGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Not compatible with grapples.

1,705.00

9021 66 In. (1680 mm) General Purpose BucketFor John Deere 500 Carrier.

768.00

9501 73 In. (1850 mm) Bale Grapple BucketOrder with Code 7010. Availability is Limited to Factory Inventory.Not compatible with 563SF Loader.

3,098.00


894.00

9024 73 In. (1850 mm) Heavy Duty BucketJohn Deere 600 Style - Compatible with Code 7030, John Deere 600 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Not compatible with grapples.

1,272.00

9026 73 In. (1850 mm) Materials BucketJohn Deere 600 Style - Compatible with Code 7030, John Deere 600/700 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Not compatible with grapples.

1,069.00


1,258.00

9028 85 In. (2150 mm) Heavy Duty BucketJohn Deere 600 Style - Compatible with Code 7030, John Deere 600/700 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Not compatible with grapples.

1,551.00

9029 85 In. (2150 mm) Heavy Duty Bucket with Grapple BracketsJohn Deere 600 Style - Compatible with Code 7030, John Deere 600/700 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Compatible with Code 9054 grapple.

1,629.00


(1/2" thick X 6" wide) For Code 9021. Replaceable Bucket Cutting Edge with Hardware is notcompatible with Digging Teeth.

145.00

9079 73 In. (1850 mm) Replaceable Bucket Cutting Edge with Hardware(1/2" thick X 6" wide) For Code 9023. Replaceable Bucket Cutting Edge with Hardware is notcompatible with Digging Teeth.

161.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9080 85 In. (2150 mm) Replaceable Bucket Cutting Edge with Hardware

(3/4" thick X 8" wide) For Code 9013, 9014, 9028 and 9029. Replaceable Bucket CuttingEdge with Hardware is not compatible with Digging Teeth.For Codes 9011 and 9024, trim to length required.

275.00

9083 91 In. (2300 mm) Replaceable Bucket Cutting Edge with Hardware(3/4" thick X 8" wide) For Code 9015 and 9025. Replaceable Bucket Cutting Edge withHardware is not compatible with Digging Teeth.

287.00

Cylinder Latching System:9041 Global Cylinder Latching System

Requires Code 7000, Global Carrier.1,146.00


For 6000, 6010 Series and 6405 Tractors.363.00

9031 Hood GuardFor 6605, 7000, 7210, 7400 and 7410 Tractors.

362.00

9032 Heavy Duty Hood GuardFor 6020, 6030 Series, 6030 Premium Series, 7030 Series, 7030 Premium Series and 6215,6415, 6615, 6715, 7220, 7320, 7420 Tractors.Region 3 - For 6110E/J and 6125E/J Tractors.

421.00

9033 Hood GuardFor 6D Series Tractors.

347.00

9034 Brush Guard for Heavy Duty Hood GuardRequires Code 9032 or Loader Ready Package.

179.00

9035 Hood GuardFor 5M Series Tractors.Not Compatible with Narrow Tractors or Low Crop tractors with ROPS folded forward.

231.00

9037 Hood GuardFor 5225, 5325, 5425, 5525, 5625, 5603, 5083E Limited, 5093E Limited and 5101E Limitedand MFWD Tractors.

225.00


213.00

9039 Brush GuardRequires Code 9035.

111.00


For 5M Series Tractors.Not compatible with 5080R, 5090R, 5100R Premium Tractors.

462.00

9049 Loader Suspension System with Operator Station On/Off SwitchFor 5M Series Tractors.Not compatible with 5080R, 5090R, 5100R Premium Tractors.

809.00

9050 Loader Suspension System with Manual On/Off LeverFor 6000 and 7000 Series Tractors.

638.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9051 Loader Suspension System with Operator Station On/Off Switch

For 6000 and 7000 Series Tractors.908.00

9052 Loader Suspension SystemFor 5025 Series Tractors. Requires Code 1005 and 1010.Not compatible with 5E LTD Tractors.

583.00

Miscellaneous:9070 Competitive Attachment Adapter Brackets - 1 Pair

To assist in making competitive attachments compatible with the JD500 attachment carrier.281.00

9075 Digging TeethFor Code 9011, 9013, 9014, 9024, 9028 and 9029. Digging Teeth are not compatible withReplaceable Bucket Cutting Edge with Hardware.Not compatible with Codes 9078, 9079, 9080 or 9083.

231.00




Relief Valve:9040 Pressure Relief Manifold

For 6000, 6010 and 6D Series Tractors order (1) 38H1546, (1) T 77613 and (1) T 77932 fromService Parts.

361.00



451.00

9056 73 In. (1850 mm) Tooth Bar for BucketFor Code 9023.Not compatible with Code 9079.

462.00

Stationary Fenders:9036 Removable Stationary Fenders - 15.7 In. (410mm) Wide

Attach to mounting frames. For Codes 1040, 1050 and 1060.475.00

9044 Stationary Fenders (Quik-Tach)For 5M Series Tractors.Attach to Mounting Frames for Code 1000.

457.00


Bale and Silage Handling Equipment:BW16008 Five Tine Round Bale/Silage Grapple with Grille






SUGGESTEDLIST PRICE

USD ($)






For John Deere 500 Carrier.768.00

BW15573 73 In. (1850 mm) General Purpose BucketFor John Deere 500 Carrier.

894.00

BW15544 73 In. (1850 mm) Global Heavy Duty BucketGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Not compatible with grapples.

1,085.00

BW15543 73 In. (1850 mm) Global Materials BucketCompatible with Global Carrier. Not compatible with grapples.

895.00

BW15459 73 In. (1850 mm) Heavy Duty BucketNot compatible with grapples. Does not include Quik-Change Standard Duty Latch Plates.

1,122.00

BWA1242 73 In. (1850 mm) Heavy Duty BucketJohn Deere 600 Style - Compatible with Code 7030, John Deere 600 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Not compatible with grapples.

1,272.00

BW00462 73 In. (1850 mm) Materials BucketJohn Deere 600 Style - Compatible with Code 7030, John Deere 600/700 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Not compatible with grapples.

1,069.00

BW14932 73 In. (1850 mm) Materials BucketNot compatible with grapples. Does not include Quik-Change Standard Duty Latch Plates.

920.00


1,353.00

BW15547 85 In. (2150 mm) Global Heavy Duty Bucket with Grapple BracketsGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Compatible with Code 9054 grapple.

1,471.00

BW15545 85 In. (2150 mm) Global Materials BucketGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Not compatible with grapples.

1,071.00

BW00466 85 In. (2150 mm) Heavy Duty BucketJohn Deere 600 Style - Compatible with Code 7030, John Deere 600/700 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Not compatible with grapples.

1,551.00

BW14936 85 In. (2150 mm) Heavy Duty BucketDoes not include Quik-Change Standard Duty Latch Plates.

1,401.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW15337 85 In. (2150 mm) Heavy Duty Bucket with Grapple Brackets

Does not include Quik-Change Standard Duty Latch Plates.1,437.00

BWA1378 85 In. (2150 mm) Heavy Duty Bucket with grapple bracketsJohn Deere 600 Style - Compatible with Code 7030, John Deere 600/700 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Compatible with Code 9054 grapple.

1,629.00


1,058.00


1,258.00


1,109.00

BW15548 91 In. (2300 mm) Global High Volume BucketGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Not compatible with grapples.

1,705.00

BW13891 91 In. (2300 mm) High Volume BucketNot compatible with grapples. Does not include Quik-Change Standard Duty Latch Plates.

1,741.00


BW15625 John Deere 500 Style Carrier 387.00

BW15463 John Deere 600/700 Style CarrierNot compatible with 5000 Series Tractors.

427.00


BWA1488 Skid Steer Style Carrier and Link 784.00



145.00

BW14763 73 In. (1850 mm) Replaceable Bucket Cutting Edge with Hardware(1/2" thick X 6" wide) For Code 9011 and 9024. Replaceable Bucket Cutting Edge withHardware is not compatible with Digging Teeth.

161.00

BW14267 85 In. (2150 mm) Replaceable Bucket Cutting Edge with Hardware(3/4" thick X 8" wide) For Code 9013, 9014, 9028 and 9029. Replaceable Bucket CuttingEdge with Hardware is not compatible with Digging Teeth.For Codes 9011 and 9024, trim to length required.

275.00


287.00





SUGGESTEDLIST PRICE

USD ($)


Cylinder Latching System:BW15503 Global Cylinder Latching System



Requires Code 9035.111.00

BW15537 Brush Guard for Heavy Duty Hood GuardRequires Code 9032 or Loader Ready Package.

179.00

BW15535 Heavy Duty Hood GuardFor 6020, 6030 Series, 6030 Premium Series, 7030 Series, 7030 Premium Series and 6215,6415, 6615, 6715, 7220, 7320, 7420 Tractors.Region 3 - For 6110E/J and 6125E/J Tractors.

421.00

BW14035 Hood GuardFor 6605, 7000, 7210, 7400 and 7410 Tractors.

362.00


213.00

BW14740 Hood GuardFor 6000, 6010 Series and 6405 Tractors.

363.00

BW15084 Hood GuardFor 5225, 5325, 5425, 5525, 5625, 5603, 5083E Limited, 5093E Limited and 5101E Limitedand MFWD Tractors.

225.00

BW15657 Hood GuardFor 5M Series Tractors.Not Compatible with narrow Tractors or Low Crop tractors with ROPS folded forward.

231.00

BW15800 Hood GuardFor 6D Series Tractors.

347.00

Hydraulic Controls:See Agricultural Sales Manual for tractor hydraulic requirements.

Field installed electronic joysticks and 2 or 3 function valves are available through TractorPrice Pages. Third function E-ICV only is available from Welland.

BWA1505 2 Function Hoses and Multi-CouplerFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.


641.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BWA1408 2 Function Single Lever Control and Rear-Mounted Loader Valve for 7000 and 7010

Series Tractors (SCV's Not Required).For 7000 and 7010 Series Tractors.

Kit includes the following components:1 - BW14678 Single Lever Control and Cables1 - BW15006 Loader Boom and Bucket Valves1 - BW15640 Hoses and Parts (2 Function)

1,362.00

BWA1362 2 Function Single Lever Control with Mid-Mounted Loader Valve for 6030 Premiumand 7030 Premium Tractors Field Installtion (SCV's Not Required)For 6030 Premium and 7030 Premium Tractors.

Kit includes the following components:1 - BW15744 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15985 Mid-Mounted Independent Control Valve (2 Function)1 - BW15495 Hoses and Parts (2 Function)

1,861.00

BWA1507 3 Function Hoses, Oil Lines and Multi-CouplerFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.

Kit includes the following components:1 - BW15854 3 Function Frame-Mounted Multi-Coupler and Front Boom-MountedMulti-Coupler1 - BW15855 Hoses and Parts (3 Function)1 - BW15759 Third Function Oil lines and Parts

1,322.00

BWA1560 3 Function Oil Lines and Parts with Mid-Mount Couplers and HosesFor 5E LTD Tractors (existing two Hoses and Couplers required).

Kit includes the following components:1 - BW15759 3 Function Oil Lines and Parts1 -BW16131 Hoses and Mid-Mount Couplers (Third Function)

230.00

BWA1538 3 Function Oil Lines and Parts with Mid-Mount Couplers and HosesFor 5E LTD Tractors with Mid-Mounted Couplers

Kit includes the following components:1 - BW15759 3 Function Oil Lines and Parts1 -BW16131 Hoses and Mid-Mount Couplers (Third Function)1 -BW15637 2 Function Hoses and Mid-Mount Couplers

478.00

BWA1473 Components for 6030, 7030, 6030 Premium and 7030 Premium Tractors with2 Function M-ICV and a 563 Loader to Convert to a 3 FunctionKit includes the following components:1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 Third Function Oil Lines1 - BW15987 Third Function EH Valve1 - BW15647 Bag of Parts

1,036.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BWA1360 Components for Loader Prep Package for 6020, 7220, 7320, 7420,

6405, 6215, 6415, 6615 and 6715 Tractors (SLC and Mid-MountedICV Ordered with Tractor - SCV's Not Required)For a 3 Function Tractor Already Equipped with 2 Function E-ICV,the 3rd Function E-ICV is Required. (Not applicable for 6015 Tractors)For 6020, 6215, 6415, 6615, 6715, 7220, 7320, 7420 Tractors.

Kit includes the following components:1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 Third Function Oil Lines1 - BW15118 Mid-Mounted EH Valve and Parts (3rd Function)1 - BW15647 Bag of Parts

1,081.00

BWA1359 Components for Loader Prep Package for 6020, 7220, 7320, 7420,6405, 6215, 6415, 6615 and 6715 Tractors (SLC and Mid-MountedM-ICV or E-ICV Ordered with Tractor - SCV's Not Required) - 3 FunctionTractor Already Equipped with 2 Function M-ICV - EH Third Function Valve RequiredFor 6020, 6215, 6415, 6615, 6715, 7220, 7320, 7420 Tractors.


1,033.00

BWA1361 Components for Loader Prep Package for 6020, 7220, 7320, 7420, 6405,6215, 6415, 6615, 6715, 7030 Premium and 7030 Series Tractors (SLCand Mid-Mounted ICV Ordered with Tractor - SCV's Not Required) - 3 FunctionTractor Already Equipped with 3 Function E-ICV, (Not for 6015 Tractors)For 6020, 6215, 6415, 6615, 6715, 7220, 7320, 7420, 7030 Premium and 7030 SeriesTractors.

Kit includes the following components:1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 Third Function Oil Lines1 - BW15647 Bag of Parts

487.00

BWA1474 Components for Loader Prep Package for 6030 and 7030 Premium Tractorswith E-ICV (SLC and 2 Function Mid-Mounted E-ICV Ordered with Tractor)For 6030 Premium and 7030 Premium Tractors.

Kit includes the following components:1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 Third Function Oil Lines1 - BW15988 Third Function E-ICV Valve1 - BW15647 Bag of Parts

1,078.00

BWA1358 Components for Loader Prep Package options for 6020, 6030, 7030 Series, 6030 Premium,7030 Premium Series, 7220, 7320, 7420, 6405, 6215, 6415, 6615 and 6715 Tractors(SLC and Mid-Mounted M-ICV or E-ICV ordered with Tractor):Kit includes the following components:1 - BW15495 Hoses and Parts (2 Function)1 - BW15647 Bag of Parts

204.00

BW15637 Hoses and Couplers (2 Function)For 5000, 5010, 5020, 5025, 5E Limited and 6D Series Tractors and 5603 Tractors withMid-Mounted Coupler.For Region 2: 5080R, 5090R, 5100R, 5070M 4WD, 5080M 4WD, 5090M and 5100M Tractorswith Mid-Mounted Couplers.

249.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW15818 Hoses and Couplers (2 Function)

For 5065M, 5075M, 5085M, 5095M and 5105M, and 5105ML 2WD and MFWD Tractors withMid-Mounted Couplers.

266.00

BW15551 Hoses and Multicoupler Loader Half (2 Function)For 6030 and 6030 Premium Tractors already equipped with multi-coupler tractor half.

350.00

BWA1357 Loader Ready Package Options for 6030 Premium and 6030 Series Tractors(SLC, Mid-Mounted ICV or E-ICV, Mid-Mounted Multicoupler TractorHalf ordered with Tractor - SCV's not required)For 6030 Premium and 6030 Series Tractors.

Kit includes the following components:1 - BW15552 Hoses and Multicoupler Loader Half (3 Function)1 - BW15487 3rd Function Oil Lines

953.00

BWA1374 Single Lever Control and Mid-Mounted Loader Valve ICV Third Function Conversion Partsfor 6000, 6010, 6020, 7220, 7320, 7420, 6405, 6215, 6415, 6615and 6715 Series TractorsFor 6000, 6010, 6020, 7220, 7320, 7420, 6405, 6215, 6415, 6615 and 6715 Series Tractors.

Kit includes the following components:1 - BW15987 3rd Function EH Valve1 - BW15500 Wiring Harness1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 3rd Function Oil Lines

939.00

BWA1512 Single Lever Control and Mid-Mounted Loader Valve M-ICV Conversion Partsfor 5000R Premium Series TractorsFor 5000R Premium Series Tractors.

Kit includes the following components:1 - BW15987 Third Function EH Valve1 - BW15845 Hoses and Parts (3 Function)1 - BW15487 Third Function Oil Lines

868.00

BWA1410 Single Lever Control and Rear-Mounted Loader Valve for 7000 and 7010Series Tractors (SCV's Not Required).For 7200, 7210, 7400 and 7410 Tractors.

Kit includes the following components:1 - BW14678 Single Lever Control and Cables1 - BW15006 Loader Boom and Bucket Valves1 - BW15640 Hoses and Parts (2 Function)1 - BW15641 Hoses and Parts (3 Function)1 - BW14366 Rear Mounted EH Valve1 - BW15119 Rear Mounted Eh Valve Mounting Parts1 - BW15487 3rd Function Oil Lines

2,695.00

BWA1373 Single Lever Control with Mid-Mounted Loader Valve E-ICV Conversion PartsFor 6030 Premium Tractors and 7030 Premium Tractors.

Kit includes the following components:1 - BW15988 3rd Function E-ICV Valve1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 3rd Function Oil Lines

866.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BWA1372 Single Lever Control with Mid-Mounted Loader Valve ICV Conversion Parts

For 6030 Premium and 7030 Premium Tractors.

Kit includes the following components:1 - BW15987 3rd Function EH Valve1 - BW15499 3rd Function Control Lever Cover and Switch (3 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 3rd Function Oil Lines

1,040.00

BWA1486 Single Lever Control with Mid-Mounted Loader Valve M-ICV Conversion PartsFor 6000, 6010, 6020, 6030 Series, 6405, 6215, 6415, 6615, 6715, 7220, 7320, 7420 Tractorsand 7030 Series Tractors. For 6030 and 7030 Premium Series Tractors after 01 November2007.


824.00

BWA1365 Single Lever Control with Mid-Mounted Loader Valve for 6000, 6010,6020 Series and 6405, 6215, 6415, 6605, 6615, 6715, 7220, 7320,7420 Tractors (SCV's Not Required) 3 Function Field InstallationFor 6000, 6010, 6020 Series and 6405, 6215, 6415, 6605, 6615, 6715, 7220, 7320, 7420Tractors.

Kit includes the following components:1 - BW15784 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15986 Mid-Mounted Independent Control Valve (3 Function)1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15379 Power Beyond Spacer (Bleed)1 - BW15487 3rd Function Oil Lines

3,046.00

BWA1363 Single Lever Control with Mid-Mounted Loader Valve for 6030 Premiumand 7030 Premium Tractors Field Installtion (SCV's Not Required)For 6030 Premium and 7030 Premium Tractors.

Kit includes the following components:1 - BW15744 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15986 Mid-Mounted Independent Control Valve (3 Function)1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 3rd Function Oil Lines

2,506.00

BWA1364 Single Lever Control with Mid-Mounted M-ICV for 6000, 6010,6020 Series and 6405, 6215, 6415, 6615, 6715, 7220, 7320, 7420Tractors (SCV's Not Required) 2 Function Field InstallationFor 6000, 6010, 6020 Series and 6405, 6215, 6415, 6615, 6715, 7220, 7320, 7420 Tractors.

Kit includes the following components:1 - BW15784 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15985 Mid-Mounted Independent Control Valve (2 Function)1 - BW15495 Hoses and Parts (2 Function)1 - BW15379 Power Beyond Spacer (Bleed)

2,401.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BWA1484 Single Lever Control with Mid-Mounted M-ICV for 6030 and 7030 Tractors

(SCV's not required) - 3 Function SLC and Mid-Mount M-ICV Field InstallationFor 6030 and 7030 Tractors.

Kit includes the following components:1 - BW15785 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15791 Power Beyond Spacer1 - BW15986 Mid Mounted Independent Control Valve (3 Function)1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (Third Function)1 - BW15487 Third Function Oil Tubes

2,681.00

BWA1483 Single Lever Control with Mid-Mounted M-ICV for 6030 and 7030 Tractors(SCV's not required) 2 Function SLC and Mid-Mount M-ICV Field InstallationFor 6030 and 7030 Tractors.

Kit includes the following components:1 - BW15785 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15989 Power Beyond Spacer1 - BW15986 Mid-Mounted Independent Control Valve (2 Function)1 - BW15495 Hoses and Parts (2 Function)

2,036.00

BWA1500 Three Function Single Lever Control with Mid-Mounted M-ICV for 6100D, 6115D, 6130Dand 6140D TractorsFor 6D Series Tractors.For 00S Tractors, order 1 RE192850 Joystick Bracket from parts.

Kit includes the following components:1 - BW15774 Single Lever Control and Valve (3 Function)1 - BW15777 Hoses and Parts ( 2 Function)1 - BW15778 Hoses and Parts (3rd Function)1 - BW15487 Third Function Oil Tubes

2,649.00

BWA1499 Two Function Single Lever Control with Mid-Mounted M-ICV for 6100D, 6115D, 6130D and6140D TractorsFor 6D Series Tractors.For 00S Tractors, order 1 RE192850 Joystick Bracket from parts.

Kit includes the following components:1 - BW15773 Single Lever Control and Valve (2 Function)1 - BW15777 Hoses and Parts ( 2 Function)

1,195.00


For 5025 Series Tractors.Requires Code 1005 and 1010.

583.00

BW15865 Loader Suspension System with Manual On/Off LeverFor 6000 and 7000 Series Tractors.

638.00

BW15816 Loader Suspension System with Manual On/Off LeverFor 5M Series Tractors.Not compatible with 5080R, 5090R, 5100R Premium Tractors.

462.00

BW15866 Loader Suspension System with Operator Station On/Off SwitchFor 6000 and 7000 Series Tractors.

908.00

BW15797 Loader Suspension System with Operator Station On/Off SwitchFor 5M Series Tractors.Not compatible with 5080R, 5090R, 5100R Premium Tractors.

809.00





SUGGESTEDLIST PRICE

USD ($)


Miscellaneous:BW15358 73 In. (1850 mm) Bale Grapple Bucket

Order with Code 7010. Availability is Limited to Factory Inventory. Not compatible with563SL Loader.

3,098.00

BW15389 Australian Code of Practice Kit No Charge


281.00

BW15763 Digging TeethFor Code 9011, 9013, 9014, 9024, 9028 and 9029. Digging Teeth are not compatible withReplaceable Bucket Cutting Edge with Hardware.Not compatible with Codes 9078, 9079, 9080 or 9083.

231.00



Quick Couplers:BW15636 2 Function Multi-Coupler 553.00

BW15635 Mid Mount Couplers (2 Function) 242.00


BW15553 Mid Mount Multi Coupler (3 Function)For each additional 3rd Function Attachment, order (1) AW33653 3rd Function/Grapple MultiCoupler Attachment Half from Service Parts. The hoses from the attachment to the 3rdFunction/Grapple Multi-Coupler Attachment Half will need female fittings to accept theAW33653.

1,012.00

Relief Valve:BW15506 Pressure Relief Manifold


361.00

Stationary Fenders:BW15781 Removable Stationary Fenders - 15.7 In. (410mm) Wide


BW15741 Stationary Fenders (Quik-Tach)Attach to Mounting Frames for Code 1000.

457.00



451.00

BW15228 73 In. (1850 mm) Tooth Bar for BucketFor Code 9023.Not compatible with Code 9079.

462.00





SUGGESTEDLIST PRICE

USD ($)


Tractor Mounting Frames:BWA1379 Mounting Frame

For 6000, 6010, 6020, 6030 Series, 6030 Premium Series and 6405, 6215, 6415 Tractors.For Region 2: 5080R, 5090R, 5100R Premium Tractors, 5070M 4WD, 5085M 4WD, 5090Mand 5100M Tractors.

1,517.00

BWA1380 Mounting FrameFor 7200, 7210, 7400, 7410, 6615, 6715, 7220, 7320, 7420 (7420 2WD only) Tractors.

1,517.00

BW15560 Mounting FrameFor 5225 and 5325 2WD and MFWD Tractors.

982.00

BW15561 Mounting FrameFor 5425, 5525, 5625, 5603, 5083E Limited, 5093E Limited, and 5101E Limited Tractors.

982.00

BWA1498 Mounting FrameFor 6100D, 6115D, 6130D and 6140D Tractors.

1,097.00

BW15878 Mounting FrameFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.

982.00

BW16115 Mounting FrameFor 5200, 5210, 5220, 5300, 5310, 5320, and 5400 2WD and MFWD Tractors.

867.00

BW16116 Mounting FrameFor 5410, 5420, 5500, 5510 and 5520 2WD and MFWD Tractors.

1,098.00








Mechanical Self-LevelingParking StandsBucket Level IndicatorOil Line CoverMounting FrameJoystick, (SLC)

2 Function Mid-Mounted M-ICV and Hoses2 Function Quick Couplers

Global Carrier73" Global Materials Bucket


SUGGESTEDLIST PRICE

USD ($)



2462P 563 Self-Leveling Loader 9,708.00




1000 Mounting FrameFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.

-486.00

1005 Mounting FrameFor 5225 and 5325 2WD and MFWD Tractors.

-486.00

1010 Mounting FrameFor 5425, 5525, 5625, 5603, 5083E Limited, 5093E Limited and 5101E Limited Tractors.

-486.00

1015 Mounting FrameFor 5200, 5210, 5220, 5300, 5310, 5320 and 5400 2WD and MFWD Tractors.

-591.00

1020 Mounting FrameFor 5410, 5420, 5500, 5510 and 5520 2WD and MFWD Tractors.

-381.00

1040 4 CYL. Mounting FrameFor 6000, 6010, 6020, 6030 Series, 6030 Premium Series and 6405, 6215, 6415 Tractors. ForRegion 2: 5080R, 5090R, 5100R Premium Tractors, 5070M 4WD, 5085M 4WD, 5090M and5100M Tractors.Region 3 - For 6110E/J Tractors.Includes Toolbox bracket.

In Base Price

1050 6 CYL. Mounting FrameFor 7030 Series, 7030 Premium Series, 7200, 7210, 7400, 7410, 6615, 6715, 7220, 7320, 7420(2WD only) Tractors.Region 3 - For 6125E/J Tractors.Includes Toolbox bracket.For Tractors with 315L Fuel Tank, a different Toolbox Bracket is required. Order (1) W53181

Same Price


563 Self-Leveling LoaderEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

TRACTOR MOUNTING FRAMES ...Continued...Bracket, (2) 03M7192 Bolts, (2) 14M7296 Nuts, (2) 19M7608 Screws and (2) 24M7053Washers from Service Parts.

1060 Mounting FrameFor 6100D, 6115D, 6130D and 6140D Tractors.Region 3 - For 6110D and 6125D Tractors.

-382.00

1095 Less Mounting FrameOrder when Loader Ready Package Codes have been ordered on the Tractor.

-1,379.00

HYDRAULIC CONTROLSSee the Agricultural Sales Manual for Tractor Hydraulic Requirements.

Loader Prep Package Options for the Tractors Already Equipped with ControlValve and Quick Couplers:

2000 2 Function - Hoses and CouplersFor 5000, 5010, 5020, 5025, 5E Limited and 6D Series Tractors and 5603 Tractor withMid-Mounted Couplers.For Region 2: 5080R, 5090R, 5100R, 5070M 4WD, 5080M 4WD, 5090M and 5100M Tractorswith Mid-Mounted Couplers.Order Code 3095 in the Couplers section.

-1,392.00

2007 3 Function Oil Lines and Parts with Mid-Mount Couplers and HosesFor 5E LTD Tractors with Mid-Mounted Couplers.

-1,183.00

2010 2 Function - Hoses and CouplersFor 5065M, 5075M, 5085M, 5095M and 5105M and 5105ML 2WD and MFWD Tractors withMid-Mounted Couplers.Order Code 3095 in the Couplers section.(For 3 Function refer to coupler section, Code 3010).

-1,376.00

Loader Ready Package options for 6030 Series and 6030 Premium SeriesTractors(SLC, Mid-Mounted M-ICV or E-ICV, and Mid-Mounted Multi-Coupler Tractor Halfordered with Tractor):

2050 2 Function - Includes Hoses and Multi-Coupler HalfOrder Code 3095 in the Couplers section.

-1,300.00

2052 3 Function - Includes Hoses, Multi-Coupler Loader Half andThird Function PartsOrder Code 3095 in the Couplers section.

-752.00

Loader Prep Package options for 6020, 6030, 7030 Series, 6030 Premium, 7030PremiumSeries, 7220, 7320, 7420, 6405, 6215, 6415, 6615 and 6715 Tractors(SLC and Mid-Mounted M-ICV or E-ICV ordered with Tractor):

2060 2 Function - Includes Hoses and Parts -1,433.00

2068 3 Function - Includes Hoses and Parts and Third Function Components(Not for 6015 Series Tractors)

-1,175.00


563 Self-Leveling LoaderContinued



SUGGESTEDLIST PRICE

USD ($)

HYDRAULIC CONTROLS ...Continued...

Single Lever Control with Mid-Mounted M-ICV Loader Valves for 6D SeriesTractors:For OOS Tractors, order (1) RE19285 Joystick Bracket from Parts.

2063 2 Function SLC and Mid-Mount M-ICV for Field InstallationLoader must be equipped with Mid-Mount Quick Couplers, select Code 3020.

-532.00


Single Lever Control with Mid-Mounted M-ICV Loader Valves for6030 Premium and 7030 Premium Tractors:

2070 2 Function SLC and Mid-Mount M-ICV Field Installation In Base Price


Single Lever Control with Mid-Mounted M-ICV for 6030 and 7030 Series Tractors:2073 2 Function SLC and Mid-Mount M-ICV for Field Installation 233.00


Single Lever Control with Mid-Mounted M-ICV Loader Valves for6000, 6010, 6020 Series, 7220, 7320, 7420, 6405, 6215, 6415,6605, 6615 and 6715 Series Tractors (SVC's Not Required):


2076 3 Function SLC and Mid-Mount M-ICV Field Installation 1,151.00

Single Lever Control with Rear-Mounted Mechanical Loader Valves for7000 and 7010 Series Tractors:

2080 2 Function -380.00

2082 3 Function (Includes Rear Mounted EH Third Function Valve) 832.00

Less Hydraulic Controls:2095 Less Hydraulic Controls -1,618.00

COUPLERSFor Codes 2000, 2010, 2050 and 2052, order Code 3095.For Codes 3000 and 3010, order Code 2095.

3000 2 Function Hoses and Multi-Coupler for 5M Series TractorsFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.

363.00

3010 3 Function Hoses, Multi-Coupler, Third Function Lines andThird Function Multi-Coupler for 5M Series TractorsFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.

982.00

3020 2 Function Mid-Mount Couplers In Base Price





SUGGESTEDLIST PRICE

USD ($)

COUPLERS ...Continued...3030 3 Function Mid-Mount Couplers and Third Function Couplers 176.00

3050 2 Function Multi-Coupler 283.00

3060 3 Function Multi-Coupler and Third Function Multi-CouplerFor each additional Third Function Attachment, order (1) AW33653Third Function Multi-Coupler Attachment Half from Serivce Parts. The hoses from theattachment to the Third Function Multi-Coupler Attachment Half will need female fittings toaccept the AW33653.

700.00

3095 Less Couplers -220.00

BALLAST BOXRear ballast is required for tractor stability. See Loader Operator's Manual for ballastrecommendations.



4020 Small Ballast Box with Extension 320.00


CARRIER7000 Global Carrier In Base Price

7010 John Deere 500 Style CarrierNot compatible with 6D, 6000, or 7000 Series Tractors.

-170.00

7020 Skid Steer Style Carrier 191.00

7030 John Deere 600/700 Style CarrierNot compatible with 5000 Series Tractors.

-134.00


BUCKETS8001 73 In. (1850 mm) Global Materials Bucket

Compatible with Code 7000, Global Carrier. Not compatible with grapples.In Base Price





Buckets:9011 73 In. (1850 mm) Global Heavy Duty Bucket


1,085.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9012 85 In. (2150 mm) Global Materials Bucket


1,071.00

9013 85 In. (2150 mm) Global Heavy Duty BucketGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Not compatible with grapples.

1,353.00

9014 85 In. (2150 mm) Global Heavy Duty Bucket with Grapple BracketsGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Compatible with Code 9054 grapple.

1,471.00

9015 91 In. (2300 mm) Global High Volume BucketGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Not compatible with grapples.

1,705.00


768.00


894.00

9024 73 In. (1850 mm) Heavy Duty BucketJohn Deere 600 Style - Compatible with Code 7030, John Deere 600 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Not compatible with grapples.

1,272.00


1,069.00


1,258.00

9028 85 In. (2150 mm) Heavy Duty BucketJohn Deere 600 Style - Compatible with Code 7030, John Deere 600/700 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Not compatible with grapples.

1,551.00

9029 85 In. (2150 mm) Heavy Duty Bucket with Grapple BracketsJohn Deere 600 Style - Compatible with Code 7030, John Deere 600/700 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Compatible with Code 9054 grapple.

1,629.00



145.00

9079 73 In. (1850 mm) Replaceable Bucket Cutting Edge with Hardware(1/2" thick X 6" wide) For Code 9023. Replaceable Bucket Cutting Edge with Hardware is notcompatible with Digging Teeth.

161.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9080 85 In. (2150 mm) Replaceable Bucket Cutting Edge with Hardware


275.00

9083 91 In. (2300 mm) Replaceable Bucket Cutting Edge with Hardware(3/4" thick X 8" wide) For Code 9015 and 9025. Replaceable Bucket Cutting Edge withHardware is not compatible with Digging Teeth.

287.00

Cylinder Latching System:9041 Global Cylinder Latching System



For 6000, 6010 Series and 6405 Tractors.363.00


362.00

9032 Heavy Duty Hood GuardFor 6020, 6030 Series, 6030 Premium Series, 7030 Series, 7030 Premium Series and 6215,6415, 6615, 6715, 7220, 7320, 7420 Tractors.Region 3 - For 6110E/J and 6125E/J Tractors.

421.00

9033 Hood GuardFor 6D Series Tractors.

347.00

9034 Brush Guard for Heavy Duty Hood GuardRequires Code 9032 or Loader Ready Package.

179.00

9035 Hood GuardFor 5M Series Tractors.Not Compatible with Narrow Tractors or Low Crop tractors with ROPS folded forward.

231.00

9037 Hood GuardFor 5225, 5325, 5425, 5525, 5625, 5603, 5083E Limited, 5093E Limited and 5101E Limitedand MFWD Tractors.

225.00


213.00

9039 Brush GuardRequires Code 9035.

111.00


For 5M Series Tractors.Not compatible with 5080R, 5090R, 5100R Premium Tractors.

462.00

9049 Loader Suspension System with Operator Station On/Off SwitchFor 5M Series Tractors.Not compatible with 5080R, 5090R, 5100R Premium Tractors.

809.00

9050 Loader Suspension System with Manual On/Off LeverFor 6000 and 7000 Series Tractors.

638.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9051 Loader Suspension System with Operator Station On/Off Switch

For 6000 and 7000 Series Tractors.908.00

9052 Loader Suspension SystemFor 5025 Series Tractors. Requires Code 1005 and 1010.Not compatible with 5E LTD Tractors.

583.00

Miscellaneous:9020 For Region 2 - Export Decals, Operator's Manual and Instructions Kit No Charge

9604 For Region 2 - Export Homologation Kit No Charge

9070 Competitive Attachment Adapter Brackets - 1 PairTo assist in making competitive attachments compatible with the JD500 attachment carrier.

281.00

9075 Digging TeethFor Code 9011, 9013, 9014, 9024, 9028 and 9029. Digging Teeth are not compatible withReplaceable Bucket Cutting Edge with Hardware.Not compatible with Codes 9078, 9079, 9080 or 9083.

231.00




Relief Valve:9040 Pressure Relief Manifold


361.00



451.00

9056 73 In. (1850 mm) Tooth Bar for BucketFor Code 9023.Not compatible with Code 9079.

462.00

Stationary Fenders:9036 Removable Stationary Fenders - 15.7 In. (410mm) Wide


9044 Stationary Fenders (Quik-Tach)For 5M Series Tractors.Attach to Mounting Frames for Code 1000.

457.00






SUGGESTEDLIST PRICE

USD ($)


Bale and Silage Handling Equipment:BW16008 Five Tine Round Bale/Silage Grapple with Grille






For John Deere 500 Carrier.768.00

BW15573 73 In. (1850 mm) General Purpose BucketFor John Deere 500 Carrier.

894.00


1,085.00

BW15543 73 In. (1850 mm) Global Materials BucketCompatible with Global Carrier. Not compatible with grapples.

895.00

BW15459 73 In. (1850 mm) Heavy Duty BucketNot compatible with grapples. Does not include Quik-Change Standard Duty Latch Plates.

1,122.00

BWA1242 73 In. (1850 mm) Heavy Duty BucketJohn Deere 600 Style - Compatible with Code 7030, John Deere 600 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Not compatible with grapples.

1,272.00


1,069.00


920.00


1,353.00

BW15547 85 In. (2150 mm) Global Heavy Duty Bucket with Grapple BracketsGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Compatible with Code 9054 grapple.

1,471.00

BW15545 85 In. (2150 mm) Global Materials BucketGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Not compatible with grapples.

1,071.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW00466 85 In. (2150 mm) Heavy Duty Bucket

John Deere 600 Style - Compatible with Code 7030, John Deere 600/700 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Not compatible with grapples.

1,551.00

BW14936 85 In. (2150 mm) Heavy Duty BucketDoes not include Quik-Change Standard Duty Latch Plates.

1,401.00

BW15337 85 In. (2150 mm) Heavy Duty Bucket with Grapple BracketsDoes not include Quik-Change Standard Duty Latch Plates.

1,437.00

BWA1378 85 In. (2150 mm) Heavy Duty Bucket with grapple bracketsJohn Deere 600 Style - Compatible with Code 7030, John Deere 600/700 Style Carrier, only.All John Deere 600 Style Buckets are equipped with Quik-Change Latch Plates.Compatible with Code 9054 grapple.

1,629.00


1,058.00


1,258.00


1,109.00

BW15548 91 In. (2300 mm) Global High Volume BucketGlobal Bucket - Compatible with Code 7000, Global Carrier, only.Not compatible with grapples.

1,705.00

BW13891 91 In. (2300 mm) High Volume BucketNot compatible with grapples. Does not include Quik-Change Standard Duty Latch Plates.

1,741.00


BW15625 John Deere 500 Style Carrier 387.00

BW15463 John Deere 600/700 Style CarrierNot compatible with 5000 Series Tractors.

427.00


BWA1488 Skid Steer Style Carrier and Link 784.00



145.00


161.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW14267 85 In. (2150 mm) Replaceable Bucket Cutting Edge with Hardware


275.00


287.00

Cylinder Latching System:BW15503 Global Cylinder Latching System



Requires Code 9035.111.00

BW15537 Brush Guard for Heavy Duty Hood GuardRequires Code 9032 or Loader Ready Package.

179.00

BW15535 Heavy Duty Hood GuardFor 6020, 6030 Series, 6030 Premium Series, 7030 Series, 7030 Premium Series and 6215,6415, 6615, 6715, 7220, 7320, 7420 Tractors.Region 3 - For 6110E/J and 6125E/J Tractors.

421.00


362.00


213.00

BW14740 Hood GuardFor 6000, 6010 Series and 6405 Tractors.

363.00

BW15084 Hood GuardFor 5225, 5325, 5425, 5525, 5625, 5603, 5083E Limited, 5093E Limited and 5101E Limitedand MFWD Tractors.

225.00

BW15657 Hood GuardFor 5M Series Tractors.Not Compatible with narrow Tractors or Low Crop tractors with ROPS folded forward.

231.00

BW15800 Hood GuardFor 6D Series Tractors.

347.00





SUGGESTEDLIST PRICE

USD ($)


Hydraulic Controls:See Agricultural Sales Manual for tractor hydraulic requirements.

Field installed electronic joysticks and 2 or 3 function valves are available through TractorPrice Pages. Third function E-ICV only is available from Welland.

BWA1505 2 Function Hoses and Multi-CouplerFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.


641.00

BWA1408 2 Function Single Lever Control and Rear-Mounted Loader Valve for 7000 and 7010Series Tractors (SCV's Not Required).For 7000 and 7010 Series Tractors.

Kit includes the following components:1 - BW14678 Single Lever Control and Cables1 - BW15006 Loader Boom and Bucket Valves1 - BW15640 Hoses and Parts (2 Function)

1,362.00

BWA1362 2 Function Single Lever Control with Mid-Mounted Loader Valve for 6030 Premiumand 7030 Premium Tractors Field Installtion (SCV's Not Required)For 6030 Premium and 7030 Premium Tractors.

Kit includes the following components:1 - BW15744 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15985 Mid-Mounted Independent Control Valve (2 Function)1 - BW15495 Hoses and Parts (2 Function)

1,861.00

BWA1507 3 Function Hoses, Oil Lines and Multi-CouplerFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.

Kit includes the following components:1 - BW15854 3 Function Frame-Mounted Multi-Coupler and Front Boom-MountedMulti-Coupler1 - BW15855 Hoses and Parts (3 Function)1 - BW15759 Third Function Oil lines and Parts

1,322.00

BWA1560 3 Function Oil Lines and Parts with Mid-Mount Couplers and HosesFor 5E LTD Tractors (existing two Hoses and Couplers required).

Kit includes the following components:1 - BW15759 3 Function Oil Lines and Parts1 -BW16131 Hoses and Mid-Mount Couplers (Third Function)

230.00

BWA1538 3 Function Oil Lines and Parts with Mid-Mount Couplers and HosesFor 5E LTD Tractors with Mid-Mounted Couplers

Kit includes the following components:1 - BW15759 3 Function Oil Lines and Parts1 -BW16131 Hoses and Mid-Mount Couplers (Third Function)1 -BW15637 2 Function Hoses and Mid-Mount Couplers

478.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BWA1473 Components for 6030, 7030, 6030 Premium and 7030 Premium Tractors with

2 Function M-ICV and a 563 Loader to Convert to a 3 FunctionKit includes the following components:1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 Third Function Oil Lines1 - BW15987 Third Function EH Valve1 - BW15647 Bag of Parts

1,036.00

BWA1360 Components for Loader Prep Package for 6020, 7220, 7320, 7420,6405, 6215, 6415, 6615 and 6715 Tractors (SLC and Mid-MountedICV Ordered with Tractor - SCV's Not Required)For a 3 Function Tractor Already Equipped with 2 Function E-ICV,the 3rd Function E-ICV is Required. (Not applicable for 6015 Tractors)For 6020, 6215, 6415, 6615, 6715, 7220, 7320, 7420 Tractors.


1,081.00

BWA1359 Components for Loader Prep Package for 6020, 7220, 7320, 7420,6405, 6215, 6415, 6615 and 6715 Tractors (SLC and Mid-MountedM-ICV or E-ICV Ordered with Tractor - SCV's Not Required) - 3 FunctionTractor Already Equipped with 2 Function M-ICV - EH Third Function Valve RequiredFor 6020, 6215, 6415, 6615, 6715, 7220, 7320, 7420 Tractors.


1,033.00

BWA1361 Components for Loader Prep Package for 6020, 7220, 7320, 7420, 6405,6215, 6415, 6615, 6715, 7030 Premium and 7030 Series Tractors (SLCand Mid-Mounted ICV Ordered with Tractor - SCV's Not Required) - 3 FunctionTractor Already Equipped with 3 Function E-ICV, (Not for 6015 Tractors)For 6020, 6215, 6415, 6615, 6715, 7220, 7320, 7420, 7030 Premium and 7030 SeriesTractors.

Kit includes the following components:1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 Third Function Oil Lines1 - BW15647 Bag of Parts

487.00

BWA1474 Components for Loader Prep Package for 6030 and 7030 Premium Tractorswith E-ICV (SLC and 2 Function Mid-Mounted E-ICV Ordered with Tractor)For 6030 Premium and 7030 Premium Tractors.

Kit includes the following components:1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 Third Function Oil Lines1 - BW15988 Third Function E-ICV Valve1 - BW15647 Bag of Parts

1,078.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BWA1358 Components for Loader Prep Package options for 6020, 6030, 7030 Series, 6030 Premium,

7030 Premium Series, 7220, 7320, 7420, 6405, 6215, 6415, 6615 and 6715 Tractors(SLC and Mid-Mounted M-ICV or E-ICV ordered with Tractor):Kit includes the following components:1 - BW15495 Hoses and Parts (2 Function)1 - BW15647 Bag of Parts

204.00

BW15637 Hoses and Couplers (2 Function)For 5000, 5010, 5020, 5025, 5E Limited and 6D Series Tractors and 5603 Tractors withMid-Mounted Coupler.For Region 2: 5080R, 5090R, 5100R, 5070M 4WD, 5080M 4WD, 5090M and 5100M Tractorswith Mid-Mounted Couplers.

249.00

BW15818 Hoses and Couplers (2 Function)For 5065M, 5075M, 5085M, 5095M and 5105M, and 5105ML 2WD and MFWD Tractors withMid-Mounted Couplers.

266.00

BW15551 Hoses and Multicoupler Loader Half (2 Function)For 6030 and 6030 Premium Tractors already equipped with multi-coupler tractor half.

350.00

BWA1357 Loader Ready Package Options for 6030 Premium and 6030 Series Tractors(SLC, Mid-Mounted ICV or E-ICV, Mid-Mounted Multicoupler TractorHalf ordered with Tractor - SCV's not required)For 6030 Premium and 6030 Series Tractors.

Kit includes the following components:1 - BW15552 Hoses and Multicoupler Loader Half (3 Function)1 - BW15487 3rd Function Oil Lines

953.00

BWA1374 Single Lever Control and Mid-Mounted Loader Valve ICV Third Function Conversion Partsfor 6000, 6010, 6020, 7220, 7320, 7420, 6405, 6215, 6415, 6615and 6715 Series TractorsFor 6000, 6010, 6020, 7220, 7320, 7420, 6405, 6215, 6415, 6615 and 6715 Series Tractors.

Kit includes the following components:1 - BW15987 3rd Function EH Valve1 - BW15500 Wiring Harness1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 3rd Function Oil Lines

939.00

BWA1512 Single Lever Control and Mid-Mounted Loader Valve M-ICV Conversion Partsfor 5000R Premium Series TractorsFor 5000R Premium Series Tractors.

Kit includes the following components:1 - BW15987 Third Function EH Valve1 - BW15845 Hoses and Parts (3 Function)1 - BW15487 Third Function Oil Lines

868.00

BWA1410 Single Lever Control and Rear-Mounted Loader Valve for 7000 and 7010Series Tractors (SCV's Not Required).For 7200, 7210, 7400 and 7410 Tractors.

Kit includes the following components:1 - BW14678 Single Lever Control and Cables1 - BW15006 Loader Boom and Bucket Valves1 - BW15640 Hoses and Parts (2 Function)1 - BW15641 Hoses and Parts (3 Function)1 - BW14366 Rear Mounted EH Valve1 - BW15119 Rear Mounted Eh Valve Mounting Parts1 - BW15487 3rd Function Oil Lines

2,695.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BWA1373 Single Lever Control with Mid-Mounted Loader Valve E-ICV Conversion Parts

For 6030 Premium Tractors and 7030 Premium Tractors.


866.00

BWA1372 Single Lever Control with Mid-Mounted Loader Valve ICV Conversion PartsFor 6030 Premium and 7030 Premium Tractors.

Kit includes the following components:1 - BW15987 3rd Function EH Valve1 - BW15499 3rd Function Control Lever Cover and Switch (3 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 3rd Function Oil Lines

1,040.00

BWA1486 Single Lever Control with Mid-Mounted Loader Valve M-ICV Conversion PartsFor 6000, 6010, 6020, 6030 Series, 6405, 6215, 6415, 6615, 6715, 7220, 7320, 7420 Tractorsand 7030 Series Tractors. For 6030 and 7030 Premium Series Tractors after 01 November2007.


824.00

BWA1365 Single Lever Control with Mid-Mounted Loader Valve for 6000, 6010,6020 Series and 6405, 6215, 6415, 6605, 6615, 6715, 7220, 7320,7420 Tractors (SCV's Not Required) 3 Function Field InstallationFor 6000, 6010, 6020 Series and 6405, 6215, 6415, 6605, 6615, 6715, 7220, 7320, 7420Tractors.

Kit includes the following components:1 - BW15784 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15986 Mid-Mounted Independent Control Valve (3 Function)1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15379 Power Beyond Spacer (Bleed)1 - BW15487 3rd Function Oil Lines

3,046.00

BWA1363 Single Lever Control with Mid-Mounted Loader Valve for 6030 Premiumand 7030 Premium Tractors Field Installtion (SCV's Not Required)For 6030 Premium and 7030 Premium Tractors.

Kit includes the following components:1 - BW15744 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15986 Mid-Mounted Independent Control Valve (3 Function)1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (3 Function)1 - BW15487 3rd Function Oil Lines

2,506.00

BWA1364 Single Lever Control with Mid-Mounted M-ICV for 6000, 6010,6020 Series and 6405, 6215, 6415, 6615, 6715, 7220, 7320, 7420Tractors (SCV's Not Required) 2 Function Field InstallationFor 6000, 6010, 6020 Series and 6405, 6215, 6415, 6615, 6715, 7220, 7320, 7420 Tractors.

Kit includes the following components:1 - BW15784 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15985 Mid-Mounted Independent Control Valve (2 Function)1 - BW15495 Hoses and Parts (2 Function)1 - BW15379 Power Beyond Spacer (Bleed)

2,401.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BWA1484 Single Lever Control with Mid-Mounted M-ICV for 6030 and 7030 Tractors

(SCV's not required) - 3 Function SLC and Mid-Mount M-ICV Field InstallationFor 6030 and 7030 Tractors.

Kit includes the following components:1 - BW15785 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15791 Power Beyond Spacer1 - BW15986 Mid Mounted Independent Control Valve (3 Function)1 - BW15495 Hoses and Parts (2 Function)1 - BW15496 Hoses and Parts (Third Function)1 - BW15487 Third Function Oil Tubes

2,681.00

BWA1483 Single Lever Control with Mid-Mounted M-ICV for 6030 and 7030 Tractors(SCV's not required) 2 Function SLC and Mid-Mount M-ICV Field InstallationFor 6030 and 7030 Tractors.

Kit includes the following components:1 - BW15785 Single Lever Control and Mounting Parts (3 Function with GSS)1 - BW15989 Power Beyond Spacer1 - BW15986 Mid-Mounted Independent Control Valve (2 Function)1 - BW15495 Hoses and Parts (2 Function)

2,036.00

BWA1500 Three Function Single Lever Control with Mid-Mounted M-ICV for 6100D, 6115D, 6130Dand 6140D TractorsFor 6D Series Tractors.For 00S Tractors, order 1 RE192850 Joystick Bracket from parts.

Kit includes the following components:1 - BW15774 Single Lever Control and Valve (3 Function)1 - BW15777 Hoses and Parts ( 2 Function)1 - BW15778 Hoses and Parts (3rd Function)1 - BW15487 Third Function Oil Tubes

2,649.00

BWA1499 Two Function Single Lever Control with Mid-Mounted M-ICV for 6100D, 6115D, 6130D and6140D TractorsFor 6D Series Tractors.For 00S Tractors, order 1 RE192850 Joystick Bracket from parts.

Kit includes the following components:1 - BW15773 Single Lever Control and Valve (2 Function)1 - BW15777 Hoses and Parts ( 2 Function)

1,195.00


For 5025 Series Tractors.Requires Code 1005 and 1010.

583.00

BW15865 Loader Suspension System with Manual On/Off LeverFor 6000 and 7000 Series Tractors.

638.00

BW15816 Loader Suspension System with Manual On/Off LeverFor 5M Series Tractors.Not compatible with 5080R, 5090R, 5100R Premium Tractors.

462.00

BW15866 Loader Suspension System with Operator Station On/Off SwitchFor 6000 and 7000 Series Tractors.

908.00

BW15797 Loader Suspension System with Operator Station On/Off SwitchFor 5M Series Tractors.Not compatible with 5080R, 5090R, 5100R Premium Tractors.

809.00





SUGGESTEDLIST PRICE

USD ($)


Miscellaneous:BW15389 Australian Code of Practice Kit No Charge


281.00

BW15763 Digging TeethFor Code 9011, 9013, 9014, 9024, 9028 and 9029. Digging Teeth are not compatible withReplaceable Bucket Cutting Edge with Hardware.Not compatible with Codes 9078, 9079, 9080 or 9083.

231.00

BW15932 For Region 2 - Export Decals, Operator's Manual and Instructions Kit No Charge

BW15938 For Region 2 - Export Homologation Kit No Charge



Quick Couplers:BW15636 2 Function Multi-Coupler 553.00



BW15553 Mid Mount Multi Coupler (3 Function)For each additional 3rd Function Attachment, order (1) AW33653 3rd Function/Grapple MultiCoupler Attachment Half from Service Parts. The hoses from the attachment to the 3rdFunction/Grapple Multi-Coupler Attachment Half will need female fittings to accept theAW33653.

1,012.00

Relief Valve:BW15506 Pressure Relief Manifold


361.00

Stationary Fenders:BW15781 Removable Stationary Fenders - 15.7 In. (410mm) Wide


BW15741 Stationary Fenders (Quik-Tach)Attach to Mounting Frames for Code 1000.

457.00



451.00

BW15228 73 In. (1850 mm) Tooth Bar for BucketFor Code 9023.Not compatible with Code 9079.

462.00





SUGGESTEDLIST PRICE

USD ($)


Tractor Mounting Frames:BWA1379 Mounting Frame

For 6000, 6010, 6020, 6030 Series, 6030 Premium Series and 6405, 6215, 6415 Tractors.For Region 2: 5080R, 5090R, 5100R Premium Tractors, 5070M 4WD, 5085M 4WD, 5090Mand 5100M Tractors.

1,517.00

BWA1380 Mounting FrameFor 7200, 7210, 7400, 7410, 6615, 6715, 7220, 7320, 7420 (7420 2WD only) Tractors.

1,517.00

BW15560 Mounting FrameFor 5225 and 5325 2WD and MFWD Tractors.

982.00

BW15561 Mounting FrameFor 5425, 5525, 5625, 5603, 5083E Limited, 5093E Limited, and 5101E Limited Tractors.

982.00

BWA1498 Mounting FrameFor 6100D, 6115D, 6130D and 6140D Tractors.

1,097.00

BW15878 Mounting FrameFor 5065M, 5075M, 5085M, 5095M, 5105M and 5105ML 2WD and MFWD Tractors.

982.00

BW16115 Mounting FrameFor 5200, 5210, 5220, 5300, 5310, 5320, and 5400 2WD and MFWD Tractors.

867.00

BW16116 Mounting FrameFor 5410, 5420, 5500, 5510 and 5520 2WD and MFWD Tractors.

1,098.00









SUGGESTEDLIST PRICE

USD ($)

TRACTOR MOUNTING FRAMES ...Continued...For Loader Ready with 7R Tractors, order Code 2995.

2700 For 7R Series Tractors Same Price

2701 For Large Frame 7020 and 7030 (6 Cylinder) Series TractorsIncludes Tool Box Kit.

In Base Price

2800 For 8R, 8000, 8010, 8020 and 8030 PST TractorsIncludes Tool Box Kit.

1,356.00

2801 For 8R IVT and 8030 IVT TractorsIncludes Tool Box Kit.

1,356.00

2995 Less Mounting Frames -1,553.00

HYDRAULIC HOSES AND CONTROLSFor 7020, 7030, 7R and 8R Series Tractors, loader control components (Rear SCV's,Mid-ICV's and Single Lever Control) must be ordered with tractors.For 8030 Series Tractors without 5th SCV, order 1-RE241359 Grapple Valve Kit, 1-RE250961Harness and 1-RE219046 Controller from Waterloo tractor factory.For 8030 Series Tractors with 5th SCV, order 1 RE241359 Grapple Valve Kit, from Waterlootractor factory.For Loader Ready with 7R Tractors, order Code 3995.

3700 3 Function Hoses and Parts for 7030 and 7020 Series TractorsHoses from the Tractor Mid-ICV to Single Point Coupler (Tractor Half).

In Base Price

3710 3 Function Hoses and Parts for 7R Series TractorsHoses from the Tractor Mid-ICV to Single Point Coupler (Tractor Half).

Same Price

3800 3 Function Hoses and Parts for 8R, 8030 Series, 8020, 8010 and 8000 Series TractorsHoses from the tractor rear SCV's to Single Point Hydraulic Coupler.

59.00

3995 Less Hydraulic Controls -659.00

HYDRAULIC CONNECTIONFor Loader Ready with 7R Tractors, order Code 4710.

4700 Single Point Hydraulic Connection Tractor Half and Grapple Mobile Half In Base Price

4705 Single Point Hydraulic Connection Tractor Half and Grapple Mobile Half for 7R TractorsONLY

Same Price

4710 Grapple Single Point Coupler Mobile Half -338.00

4995 Less Hydraulic Connection -492.00

GUARDSFor Loader Ready with 7R Tractors, order Code 5995.

5700 Hood Guard for 7R Series TractorsRequires front weight bracket.

Same Price

5701 Hood Guard for 7R Series Tractors with Front Hitch -125.00

5702 Hood Guard for 7030 and 7020 Series Tractors In Base Price


H480 Mechanical Self-Leveling LoaderContinued



SUGGESTEDLIST PRICE

USD ($)

GUARDS ...Continued...

5800 Hood Guard for 8R and 8030 Series TractorsNote: Requires front weight bracket.

35.00

5801 Hood Guard for 8020 Series TractorsNote: Requires front weight bracket.

35.00

5802 Hood Guard for 8000 and 8010 Series Tractors 35.00

5995 Less Hood Guard -469.00

BUCKETS8700 96 In. (2450 mm) Heavy Duty Global Bucket (Cat 2) In Base Price

8701 108 In. (2750 mm) Heavy Duty Global Bucket (Cat 2) 210.00

8702 108 In. (2750 mm) High Volume Global Bucket (Cat 2) 822.00

8995 Less Bucket -1,478.00



Note: Requires Code 8700 or 8701.2,380.00

Stationary Fenders:9160 Stationary Fenders 1,124.00

Miscellaneous:9102 French North American Operator's Manual and Decal Kit No Charge

9104 Spanish North American Operator's Manual and Decal Kit No Charge


Bale and Silage Handling Equipment:BW16008 Five Tine Round Bale/Silage Grapple with Grille 2,380.00

Buckets:BW15904 108 In. (2750 mm) Heavy Duty Global Bucket (Cat. 2) 1,841.00

BW16004 108 In. (2750 mm) High Volume Global Bucket (Cat. 2) 2,530.00

BW15903 96 In. (2450 mm) Heavy Duty Global Bucket (Cat. 2) 1,626.00





SUGGESTEDLIST PRICE

USD ($)



(3/4"thick X 8" wide) Replaceable Bucket Cutting Edge with Hardware is not compatible withDigging Teeth.

338.00

Guards:BW15011 Hood Guard

For 8000, 8010 Series Tractors with or without a front weight bracket or 8020 Series Tractorswithout a front weight bracket.

554.00

BW15587 Hood GuardFor 8020 Series Tractors with a front weight bracket.

554.00

BW15629 Hood GuardFor 7720, 7820, 7920, 7630, 7730, 7830 and 7930 Tractors.

516.00

BW15922 Hood Guard for 7R Series TractorsRequires Front Weight Bracket.

516.00

BW15959 Hood Guard for 7R Series Tractors with Front Hitch 378.00

BW15907 Hood Guard for 8R and 8030 Series Tractor 554.00

Hydraulic Controls:BW15911 Hydraulic Hoses and Parts (3 Function)

For H480 Loader on 7030 and 7020 Series Tractors. Hoses from the Tractor Mid-ICV to theSingle Point Coupler.

725.00

BW15910 Hydraulic Hoses and Parts (3 Function)For H480 Loader on 8R, 8030 Series, 8020, 8010 and 8000 Series Tractors Hoses from thetractor Mid-SCV to Multi-Coupler.

790.00

BWA1521 Hydraulic Hoses and Parts (3 Function)For 8R and 8030 Series Tractors - 3 FunctionKit includes the following Components:1-BW15910 Hoses & Parts- 3 Function3-BW13743 SCV Parts

876.00

BW16147 Hydraulic Hoses and Parts (3 Function)For H480 Loader on 7R Tractors.Hoses from the Tractor Mid-ICV to the Single Point Coupler.

725.00

BWA1520 Single Lever Control, Hoses & Parts (3 Function)For 8020, 8010, 8000 Series Tractors - 3 FunctionKit includes the following Components:1-BW16065 (Single Lever Control Electronic Joystick)1-BW14366 EH Valve1-BW14368 EH Valve Mounting Parts1-BW15910 Hoses & Parts - 3 Function3-BW13743 SCV Parts

2,806.00

Miscellaneous:W44540 108 In. (2750 mm) Replaceable Bolt-On Wear Edge See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW15763 Digging Teeth 231.00

BW16001 French North American Operator's Manual and Decal Kit No Charge

BW16002 Spanish North American Operator's Manual and Decal Kit No Charge

Quick Couplers:BW16011 Grapple Single Point Coupler Mobile Half 169.00

BW15909 Single Point Hydraulic Connection Tractor Half and Grapple Mobile HalfFor H480 Loader compatible Tractors - excluding the 7R Series Tractors.

541.00

BWA1582 Single Point Hydraulic Connection Tractor Half and Grapple Mobile HalfFor H480 Loader with 7R Tractors.

541.00

Stationary Fenders:BW15928 Stationary Fenders

Note: Requires Code 8700 or 8701.1,124.00

Tractor Mounting Frames:BW15883 Mounting Frame

Mounting Frame for 7R Series Tractors.1,708.00

BWA1526 Mounting Frame and Tool BoxFor Large Frame 7020 and 7030 (6-Cylinder Series TractorsKit Includes the following Components:1 BW1933 - Mounting Frame1 BW15929 - Tool Box Kit

1,708.00

BWA1523 Mounting Frame with Tool Box KitFor H480 Loader with 8R, 8000, 8010, 8020 or 8030 PST TractorKit Includes the following Components:BW15947 - Mounting FrameBW15929 - Tool Box Kit and Parts

3,200.00

BWA1524 Mounting Frame with Tool Box KitFor H480 Loader with 8R IVT and 8030 IVT TractorsKit Includes the following Components:BW15888 - Mounting FrameBW15929 - Tool Box Kit and Parts

3,200.00









SUGGESTEDLIST PRICE

USD ($)


EH Valve:BW15499 3rd Function Control Lever and Switch

For 563 and 673 Loaders.216.00

BW15500 3rd Function Control Wiring HarnessFor 563 and 673 Loaders.

116.00

BW15118 E-ICV Valve and Parts (3rd Function)For 563, 673 and 741 Loaders.

595.00

BW15987 E-ICV Valve and Parts (3rd Function)For 563 Loaders.

549.00

BW15988 E-ICV Valve and Parts (3rd Function)For 563 Loaders.

591.00

BW15119 EH Mounting PartsFor 741 Loader.

453.00

BW14366 EH ValveFor 740, 741 and 843 Loaders.

514.00

BW14367 EH Valve Mounting PartsFor 740 Loader.

460.00

BW14368 EH Valve Mounting PartsFor 843 Loader.

322.00

BW15314 Mid-Mount E- ICV Valve and Parts (3rd Function)For 563 Loaders.

546.00

Hoses and Parts:BW14363 Hoses

For 843 Loader.175.00

BW16131 Hoses and Mid-Mount Couplers (3rd Function)For 553 and 563 Loaders.

127.00

BW14109 Hoses and PartsFor 740 Loader.

200.00


180.00


68.00


102.00


Attachments for Field Conversion - Loaders



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW14973 Hoses and Parts


BW15123 Hoses and Parts (2 Function)For 741 Loader.

391.00


218.00


232.00

BW15495 Hoses and Parts (2 Function)For 673 Loaders.

186.00

BW15640 Hoses and Parts (2 Function)For 563 and 673 Loaders.

239.00


365.00


266.00

BW15844 Hoses and Parts (2 Function)For 563 Loaders.

229.00


484.00


179.00


92.00


184.00


100.00


136.00


406.00

BW15777 Hoses and Parts (3 Function)For 563, 673 Loaders.

271.00

BW15778 Hoses and Parts (3 Function)For 563, 673 Loaders.

135.00

BW15241 Hoses and Parts (3rd Function)For 746 Loader.

109.00


Attachments for Field Conversion - LoadersContinued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW15603 Hoses and Parts (3rd Function)


BW13281 Hoses and Parts - SCV ControlsFor 740 Loader.

114.00

BW13246 Hoses for ICV Supply and ReturnFor 740 and 741 Loaders.

129.00

BW14361 ICV Supply HosesFor 843 Loader.

133.00

Hydraulic Controls:BW14972 2 Function Hoses and Parts for Tractors with

2 Function ICV Factory InstalledFor 740 Loader.

205.00

BW14279 Electronic Single Lever ControlFor 843 Loader.

1,095.00

BW16065 Electronic Single Lever ControlFor H480 Loader.

1,095.00

BW15856 Independent Control Valve (3 Function)For 553 Loaders.

325.00

BW15985 Mid-Mounted Independent Control Valve (2 Function)For 563 Loaders.

922.00

BW15986 Mid-Mounted Independent Control Valve (3 Function)For 563 Loaders.

1,291.00

BW15773 Single Level Control and Valve (2 Function)For 553, 563, 673 Loaders.

924.00

BW15774 Single Level Control and Valve (3 Function)For 553, 563, 673 Loaders.

2,060.00

BW14678 Single Lever Control and CablesFor 740 and 741 Loaders.

419.00

BW15744 Single Lever Control and Mounting Parts (2 or 3 Function)For 563, 673 and 741 Loaders.

754.00

BW15785 Single Lever Control and Mounting Parts (3 Function with GSS)For 741 Loader.

754.00

BW15784 Single Lever Control and Mounting Parts (3 Function with GSS)For 563, 673, 740 and 741 Loaders.

1,119.00

BW15807 Single Lever Control and Mounting Parts (3 Function with GSS)For 563 Loaders.

832.00

BW13247 Single Lever Control and ValveFor 522, 542, 740 and 741 Loaders.

919.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW14362 Single Lever Control and Valve

For 843 Loader.1,256.00

BW13248 Single Lever Valve - 3-FunctionFor 740 and 741 Loaders.

1,278.00

Miscellaneous:BW15647 Bag of Parts

For 563 Loaders.26.00

BW15808 Link KitFor 563 Loaders.

19.00

BW13995 Loader Boom and Bucket ValvesFor 740 Loader.

715.00

BW15006 Loader Boom and Bucket ValvesFor 741 Loader.

704.00

BW13853 Parking Stand without Mid-Mount Couplers 226.00

BW15379 Power Beyond SpacerFor 673, 740 and 741 Loaders.

175.00

BW15791 Power Beyond SpacerFor 741 Loader.

169.00

BW15989 Power Beyond SpacerFor 563 Loader.

175.00

BW15598 Pressure Releasing Manifold and PartsFor 843 Loader.

400.00

RE13523 Stops for SCV LeverFor 740 and 741 Loaders.

37.00

Mounting Frame Components:AW34789 Mounting Brackets


BW15158 Mounting FrameFor 746 Loader.

1,439.00

BW15468 Mounting FrameFor 563 and 673 Loaders.

1,480.00

BW15690 Mounting FrameFor 563 and 673 Loaders.

1,480.00


1,507.00


1,640.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW15474 Mounting Frame

For 563 and 673 Loaders.1,059.00

BW15933 Mounting FrameFor H480 Loader with Large Frame 7020 and 7030 (6-Cylinder) Series Tractors.

1,487.00

BW15947 Mounting FrameFor H480 Loader with 8R, 8000, 8010, 8020 or 8030 PST Tractor.

2,979.00

BW15888 Mounting FrameFor H480 Loader with 8R IVT and 8030 IVT Tractors.

2,979.00

AW31844 Mounting Frame PartsFor 741 Loader.

47.00

BW15238 Mounting Frame PartsFor 746 Loader.

215.00

AW33376 Mounting Frame PartsFor 741 Loader.

255.00

BW15929 Mounting Frame PartsFor H480 Loader.

221.00

BW15170 Mounting PlateFor 741 Loader.

72.00

BW15652 Tool Box BracketFor 563 and 673 Loaders.

37.00

BW15833 Tool Box BracketFor 741 Loader. Not compatible with H3 lights.

46.00

BW15796 Tool Box BracketFor 563 Loaders on 6D Series Tractors.

37.00

Oil Tubes and Parts:BW15079 3rd Function Oil Tubes


BW15162 3rd Function Oil TubesFor 746 Loader.

308.00


183.00


183.00


184.00


103.00

BW15592 3rd Function Oil Tubes and HosesFor 843 Loader.

201.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW15656 3rd Function Oil Tubes and Parts


Quick Couplers:BW15853 2 Function Frame Mounted Multi-Coupler


BW13898 2 Function Mid-Mount CouplersFor 740 Loader.

217.00

BW15854 3 Function Frame Mounted Multi-Coupler and Front Boom Mounted Multi-CouplerFor 553 Loader.

810.00

BW15247 3 Function Mid-Mount AdapterFor 746 Loader.

75.00

BW15552 Hoses and Multicoupler Loader Half (3 Function)For 563 and 673 Loaders.

770.00

SCV Parts:BW13743 SCV Parts

For 740 and 843 Loaders.29.00





SUGGESTEDLIST PRICE

USD ($)

EX-WORKS Laredo, Texas; Martinez,Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,Ontario

PACKAGE 11 ORDER CODE2132P11 MX5 Lift-Type Rotary Cutter

Stump JumperSlip ClutchPuncture Proof Laminated TireFront Safety Chain ShieldRear Safety Chain ShieldBushing Kit for iMatch Quick Coupler

2,630.00

AGRICULTURAL PRODUCTSJOHN DEERE ROTARY CUTTERS

MX5 Lift-Type Rotary Cutter Stocker Package

06 May 2011 US & Canada9-Rotary Cutters-00100- 1


MX5 Lift-Type Rotary Cutter Stocker PackageContinued




SUGGESTEDLIST PRICE

USD ($)




3,041.00









SUGGESTEDLIST PRICE

USD ($)




3,990.00









SUGGESTEDLIST PRICE

USD ($)


PACKAGE 11 ORDER CODE2166P11 MX8 Pull-Type Rotary Cutter, 540 RPM

Stump Jumpers2 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

7,047.00

PACKAGE 21 ORDER CODE2167P21 MX8 Lift-Type Rotary Cutter, 540 RPM

Stump Jumpers2 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldLess Safety Tow Chain

5,569.00

PACKAGE 31 ORDER CODE2168P31 MX8 Semi-Mount Rotary Cutter, 540 RPM

Stump Jumpers2 - Severe Duty Ag TiresFront Safety Chain ShieldRear Safety Chain ShieldLess Safety Tow Chain

5,676.00

PACKAGE 41 ORDER CODE2169P41 MX8 Semi-Mount Hydraulic Offset Rotary Cutter, 540 RPM


6,592.00


MX8 Rotary Cutter Stocker Packages



MX8 Rotary Cutter Stocker PackagesContinued




SUGGESTEDLIST PRICE

USD ($)



Stump Jumpers2 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

7,590.00


Stump Jumpers2 - Severe Duty Ag TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

7,712.00

PACKAGE 21 ORDER CODE2177P21 MX10 Lift-Type Rotary Cutter, 540 RPM


6,522.00

PACKAGE 41 ORDER CODE2178P41 MX10 Semi-Mount Rotary Cutter, 540 RPM

Stump Jumpers2 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldLess Safety Tow ChainSemi-Mount Extension Brackets (required for front chain shield clearance)

6,600.00


MX10 Rotary Cutter Stocker Packages



MX10 Rotary Cutter Stocker PackagesContinued




SUGGESTEDLIST PRICE

USD ($)


PACKAGE 11 ORDER CODE1836P11 609 Heavy Duty Integral Rotary Cutter

Bar Type Holder with Flat BladesSlip ClutchPuncture Proof Laminated TireFront Safety Chain ShieldRear Safety Chain ShieldLess Safety Tow Chain

4,632.00


609 Heavy Duty Integral Rotary Cutter Stocker Package



609 Heavy Duty Integral Rotary Cutter Stocker PackageContinued




SUGGESTEDLIST PRICE

USD ($)


PACKAGE 11 ORDER CODE178KP11 709 Heavy Duty Integral Rotary Cutter

Bar Type Holder with Flat BladesSlip ClutchPuncture Proof Laminated TireFront Safety Chain ShieldRear Safety Chain ShieldLess Safety Tow Chain

5,963.00


709 Heavy Duty Integral Rotary Cutter Stocker Package



709 Heavy Duty Integral Rotary Cutter Stocker PackageContinued




SUGGESTEDLIST PRICE

USD ($)


PACKAGE 11 ORDER CODE2217P11 HX10 Pull-Type Rotary Cutter, 540 RPM

Stump JumpersConstant Velocity Driveline with Lock-Slide CollarSuction Blades2 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

9,147.00


Stump JumpersConstant Velocity Driveline with Lock-Slide CollarSuction Blades2 - Severe Duty Ag TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

9,269.00


HX10 Rotary Cutter Stocker Packages



HX10 Rotary Cutter Stocker PackagesContinued




SUGGESTEDLIST PRICE

USD ($)


PACKAGE 11 ORDER CODE2225P11 HX14 Lift-Type Rotary Cutter, 1000 RPM

Bar Type Blade HolderDual Suction BladesStandard Driveline with Lock-Slide Collar 1-3/4"2 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldLess Safety Tow Chain

10,909.00

PACKAGE 12 ORDER CODE2225P12 HX14 Lift-Type Rotary Cutter, 1000 RPM

Bar Type Blade HolderDual Suction BladesStandard Driveline with Lock-Slide Collar 1-3/8"2 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

10,739.00


Bar Type Blade HolderDual Suction BladesStandard Driveline with Lock-Slide Collar 1-3/8"2 - Severe Duty Ag TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

10,548.00


HX14 Rotary Cutter Stocker Packages



HX14 Rotary Cutter Stocker PackagesContinued




SUGGESTEDLIST PRICE

USD ($)


PACKAGE 11 ORDER CODE227BP11 HX15 Flex-Wing Rotary Cutter, 540 RPM

Spring SuspensionStump JumpersSuction BladesConstant Velocity with Lock-Slide Collar Driveline, Cat 56 - Severe Duty Ag TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

18,184.00

PACKAGE 12 ORDER CODE227BP12 HX15 Flex-Wing Rotary Cutter, 540 RPM

Spring SuspensionStump JumpersSuction BladesConstant Velocity with Lock-Slide Collar Driveline, Cat 56 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

17,818.00

PACKAGE 21 ORDER CODE227CP21 HX15 Flex-Wing Rotary Cutter, 1000 RPM

Spring SuspensionStump JumpersSuction BladesConstant Velocity with Lock-Slide Collar Driveline, Cat 5, 1-3/8 In.6 - Severe Duty Ag TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

18,184.00

PACKAGE 22 ORDER CODE227CP22 HX15 Flex-Wing Rotary Cutter, 1000 RPM

Spring SuspensionStump JumpersSuction BladesConstant Velocity with Lock-Slide Collar Driveline, Cat 5, 1-3/8 In.6 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

17,818.00


HX15 Flex-Wing Rotary Cutter Stocker Packages



HX15 Flex-Wing Rotary Cutter Stocker PackagesContinued




SUGGESTEDLIST PRICE

USD ($)

EX WORKS Laredo, Texas; Marinez, Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,Ontario

PACKAGE 11 ORDER CODE225AP11 CX15 Flex-Wing Rotary Cutter, 540 RPM

Air Cushioned Suspension with Shock AbsorbersStump JumpersSuction BladesConstant Velocity with Lock-Slide Collar Driveline, Cat 56 - Severe Duty Ag TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

20,367.00

PACKAGE 12 ORDER CODE225AP12 CX15 Flex-Wing Rotary Cutter, 540 RPM

Air Cushioned Suspension with Shock AbsorbersStump JumpersSuction BladesConstant Velocity with Lock-Slide Collar Driveline, Cat 56 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

19,797.00

PACKAGE 21 ORDER CODE225BP21 CX15 Flex-Wing Rotary Cutter, 1000 RPM

Air Cushioned Suspension with Shock AbsorbersStump JumpersSuction BladesConstant Velocity with Lock-Slide Collar Driveline, Cat 56 - Severe Duty Ag TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

20,367.00

PACKAGE 22 ORDER CODE225BP22 CX15 Flex-Wing Rotary Cutter, 1000 RPM

Air Cushioned Suspension with Shock AbsorbersStump JumpersSuction BladesConstant Velocity with Lock-Slide Collar Driveline, Cat 56 - Puncture Proof Laminated TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

19,797.00


CX15 Flex-Wing Rotary Cutter Stocker Packages



CX15 Flex-Wing Rotary Cutter Stocker PackagesContinued




SUGGESTEDLIST PRICE

USD ($)


PACKAGE 11 ORDER CODE2248P11 HX20 Flex-Wing Rotary Cutter, 1000 RPM

Spring SuspensionStump JumpersSuction BladesConstant Velocity with Lock-Slide Collar Driveline, Cat 5, 1-3/8 In.6 - Severe Duty Ag TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

23,227.00


HX20 Flex-Wing Rotary Cutter Stocker Packages



HX20 Flex-Wing Rotary Cutter Stocker PackagesContinued




SUGGESTEDLIST PRICE

USD ($)


PACKAGE 11 ORDER CODE2264P11 CX20 Flex-Wing Rotary Cutter, 1000 RPM

Air Cushioned Suspension with Shock AbsorbersStump JumpersSuction BladesConstant Velocity with Lock-Slide Collar Driveline, Cat 5, 1-3/8 In.6 - Severe Duty Ag TiresFront Safety Chain ShieldRear Safety Chain ShieldSafety Tow Chain

30,178.00


CX20 Flex-Wing Rotary Cutter Stocker Packages



CX20 Flex-Wing Rotary Cutter Stocker PackagesContinued



Smooth, Easy Clean, Top DeckDeck Thickness:

Upper Deck - 1/8" (3.0mm)Lower Deck - 1/8" (3.0mm)Total - 1/4" (6.0mm)

One Gearcase, Power Rating:75 HP (56 kW) Continuous90 HP (67 kW) Peak

2 In. Brush Cutting CapacitySlip Clutch ProtectionUnibody Frame:

8.5 In. (216mm) Body Depth1/4 In. (6.0mm) Skirt Thickness

Cutting Width: 60 In. (1.52m)Transport Width: 65 In. (1.62m)Cutting Height: 1 to 9.5 In. (25 - 241mm)Blade Tip Speed: 14121 ft/min (71.7 m/s)Hitch:

Integral Hitch (Cat. I, Convertibleto II, 3-Point Hitch with or without

Quick Coupler)Weld on Full Length Wear Shoes - ReplaceableDriveline:

Standard Driveline (Cat. 3) - 540 RPM PTORound Pan Bladeholder (Stump Jumper)Suction Blades (1/2 In. x 4 In.)One Wheel Support (Swiveling,

Height Adjustable)One Puncture Proof Laminated TireFront Safety Shield - ChainRear Safety Shield - ChainMinimum Recommended Tractor PTO HP:

25 HP; 4300 or equivalent

Front and rear safety shields reduce the risk of thrown objects which could be hazardous. The base rotary cutter complies with the Industrial Mower SafetyStandard SAE J232.


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Laredo, Texas; Martinez,Georgia; Waterloo, Iowa; Frisco, Texas; Grimsby,Ontario

2132P MX5 Lift-Type Rotary Cutter - 540 RPM PTOOrder Code 9020 for Quick Coupler Compatibility.Order Code 9030 for Conversion to Cat. II.If ordering for use with the iMatch Auto-Hitch, you will need to shorten the rotary cutterdriveline according to the iMatch Auto-Hitch instructions.Serial Number P00MX5C016000 and above.

2,559.00

FRONT SAFETY SHIELDS1610 Front Safety Shield - Chain In Base Price

REAR SAFETY SHIELDS1710 Rear Safety Shield - Chain In Base Price


Miscellaneous:9020 iMatch / Quik-Coupler Bushing Kit 78.00

9030 Cat. II Conversion Kit 121.00




MX5 Lift-Type Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)


Miscellaneous:W46506 Cat. I Hitch Pin

Two required.See Parts

BW15128 Cat. II Conversion Kit 121.00


W46345 Skid Shoe (weld on)Two required.

See Parts


BW15056 iMatch / Quik-Coupler Bushing Kit 78.00

Safety Shields:BW14480 Front Safety Shield 184.00

BW14483 Front Safety Shield 205.00


MX5 Lift-Type Rotary Cutter - 540 RPM PTOContinued



Upper Deck - 9/64" (3.5 mm)Lower Deck - 9/64" (3.5 mm)Total - 9/32" (7.0mm)

One Gearcase, Power Rating:75 HP (56 kW) Continuous90 HP (67 kW) Peak




Integral Hitch (Cat. I Convertibleto II, 3-Point Hitch with or

without Quick Coupler)Weld on Full Length Wear Shoes - ReplaceableDriveline:



30 HP; 4500 or equivalent



SUGGESTEDLIST PRICE

USD ($)



2142P MX6 Lift-Type Rotary Cutter - 540 RPM PTOOrder Code 9020 for Quick Coupler Compatibility.Order Code 9030 for Conversion to Cat. II.If ordering for use with the iMatch Auto-Hitch, you will need to shorten the rotary cutterdriveline according to the iMatch Auto-Hitch instructions.Serial Number P00MX6C034000 and above.

2,970.00





9030 Cat. II Conversion Kit 121.00







SUGGESTEDLIST PRICE

USD ($)




BW15128 Cat. II Conversion Kit 121.00



See Parts









Upper Deck - 9/64" (3.5 mm)Lower Deck - 9/64" (3.5 mm)Total - 9/32" (7.0mm)

One Gearcase, Power Rating:75 HP (56 kW) Continuous100 HP (74.5 kW) Peak




Integral Hitch (Cat. II and IIIN 3-Point

Hitch with or without Quick Coupler)Weld on Full Length Wear Shoes - ReplaceableDriveline:



50 HP; 4 cyl. 5000 Series or equivalent



SUGGESTEDLIST PRICE

USD ($)



2152P MX7 Lift-Type Rotary Cutter - 540 RPM PTOOrder Code 9020 for Quick Coupler Compatibility.Serial Number P00MX7C017500 and above.

3,919.00







Wheels and Tires:9010 Dual Tailwheel Support, Hub and Wheel 325.00





SUGGESTEDLIST PRICE

USD ($)


Miscellaneous:W46503 Cat. II Hitch Pin




See Parts





Wheels and Tires:BW00454 Dual Tailwheel Support, Hub and Wheel 325.00






Three Gearcases, Power Ratings:Center - 120 Continuous HP (89.4 kW);

130 Peak HP (97 kW)Outer - 75 Continuous HP (56 kW);

100 Peak HP (74.5 kW)2 In. Brush Cutting CapacityShock Absorbing Cross ShaftsSlip Clutch ProtectionUnibody Frame:


Cutting Width: 96 In. (2.44m)Transport Width: 102 In. (2.58m)Cutting Height: 1 to 12 In. (25 - 305mm)Blade Tip Speed: 15739 ft/min (80 m/s)Weld on Full Length Wear Shoes

Minimum Recommended Tractor PTO HP: 40 HPStandard Driveline (Equal Angle, Cat.4) -

540 RPM PTOLevel LiftRound Pan Bladeholder (Stump Jumper)Suction Blades (1/2 In. x 4 In.)Two Wheel Supports (Swiveling and Row

Width Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - ChainSafety Tow ChainJack with Mounting BracketsLift Cylinder and HoseLift Cylinder Depth Stops



SUGGESTEDLIST PRICE

USD ($)



2166P MX8 Pull-Type Center Drive Rotary Cutter - 540 RPM PTOSerial Number P00MX8E018000 and above.

7,047.00

WHEELS AND TIRES1210 Two 21.0" x 5.25" x 9.0" Puncture Proof Laminated Tires In Base Price

1230 Two 12 In. Wheels with 21" x 7" x 12" 16 PR Severe Duty Ag Tires 122.00



SAFETY TOW CHAINSafety Chains are required to secure hitch to tractor when towing on roadways. All tractorsmust be equipped with an intermediate chain support ahead of hitch pin. If tractor is not soequipped, see tractor section of the Agricultural Sales Manual.

6000 10,000 Lb. (45kN) Safety Chain for Towed Equipment In Base Price



MX8 Pull-Type Center Drive Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...

Miscellaneous:9060 Lighting Kit (Tractor must have 7 Pin Electrical Outlet) 516.00

9080 SMV Emblem and Support 50.00



Wheels and Tires:9010 MX8, MX10, HX10, HX14 Third or Fourth Pull-Type Wheel Support and Hub

Additional wheel support and hub. Requires wheel and tire.204.00

9030 21.0" x 5.25" x 9.0" Laminated Tire and WheelAdditional wheel and tire. Requires wheel support and hub.

110.00

9045 21" x 7" x 12" 16 PR Severe Duty Ag Tire and WheelAdditional wheel and tire. Requires wheel support and hub.

177.00


Hitch and Drawbar:BE24260 Safety Chain for Towed Equipment, 10,000 Lb. (45 kN)

Order from JD Ottumwa Works.37.00

Miscellaneous:AW29956 Clevis Kit - Clamp on Jaws with Special Drawbar Pin

To reduce tractor drawbar and implement clevis wear.See Parts


BW14472 Lighting Kit (Tractor must have 7 Pin Electrical Outlet) 516.00

BW00381 SMV Emblem and Support 50.00

W45401 Skid Shoe (Weld On) See Parts




Wheels and Tires:AW34778 21" x 7" x 12" 16 PR Severe Duty Ag Tire and Wheel

Additional wheel and tire. Requires wheel support and hub.177.00


MX8 Pull-Type Center Drive Rotary Cutter - 540 RPM PTOContinued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AW30717 21.0" x 5.25" x 9.0" Laminated Tire and Wheel


BW14332 MX8, MX10, HX10, HX14 Third or Fourth Pull-Type Wheel Support and HubAdditional wheel support and hub. Requires wheel and tire.

204.00

AW33090 Tire and tube kit for 21" x 7" x 12" Severe Duty Ag Tire See Parts














Cutting Width: 96 In. (2.44m)Transport Width: 102 In. (2.58m)Cutting Height: 1 to 12 In. (25 - 305mm)Blade Tip Speed: 15739 ft/min (80 m/s)

Weld on Full Length Wear ShoesMinimum Recommended Tractor PTO HP:

4 cyl. 5000 Series or equivalentStandard Driveline (Cat. 4) -

540 RPM 1-3/8 PTOHitch (Cat. II, III and IIIN 3-Point Hitch

with or without Quick Coupler)Round Pan Bladeholder (Stump Jumper)Suction Blades (1/2 In. x 4 In.)Two Wheel Supports (Swiveling,

Height Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - Chain



SUGGESTEDLIST PRICE

USD ($)



2167P MX8 Lift-Type Center Drive Rotary Cutter - 540 RPM PTOSerial Number P00MX8C018000 and above.

5,569.00

WHEELS AND TIRES1250 2 - Puncture Proof 15" Laminated Wide Track Tires In Base Price



SAFETY TOW CHAIN6095 Less Safety Tow Chain In Base Price





MX8 Lift-Type Center Drive Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9099 French Operator's Manual and Decal Kit No Charge



Miscellaneous:BW14500 French Operator's Manual and Decal Kit No Charge








MX8 Lift-Type Center Drive Rotary Cutter - 540 RPM PTOContinued








Cutting Width: 96 In. (2.44m)Transport Width: 102 In. (2.58m)Cutting Height: 1 to 12 In. (25 - 305mm)

Blade Tip Speed: 15739 ft/min (80 m/s)Weld on Full Length Wear ShoesMinimum Recommended Tractor PTO HP: 40 HPStandard Driveline (Cat. 4) - 540 RPM PTORound Pan Bladeholder (Stump Jumper)Suction Blades (1/2 In. x 4 In.)Two Wheel Supports (Swiveling and Row

Width Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - ChainLift Cylinder and HoseLift Cylinder Depth Stops



SUGGESTEDLIST PRICE

USD ($)



2168P MX8 Semi-Mount Center Drive Rotary Cutter - 540 RPM PTOSerial Number P00MX8H018000 and above.

5,676.00









MX8 Semi-Mount Center Drive Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)





Two required. Also requires (2) M72431 and (2) A15146.See Parts









MX8 Semi-Mount Center Drive Rotary Cutter - 540 RPM PTOContinued








Cutting Width: 96 In. (2.44m)Transport Width: 102 In. (2.58m)Cutting Height: 1 to 12 In. (25 - 305mm)Blade Tip Speed: 15739 ft/min (80 m/s)

Weld on Full Length Wear ShoesMinimum Recommended Tractor PTO HP: 40 HPOffset: 0-13" RIGHT or LEFTStandard Driveline (Cat. 4) - 540 RPM PTORound Pan Bladeholder (Stump Jumper)Suction Blades (1/2 In. x 4 In.)Two Wheel Supports (Swiveling and Row

Width Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - ChainOffset Cylinder and HosesLift Cylinder and HoseLift Cylinder Depth Stops



SUGGESTEDLIST PRICE

USD ($)



2169P MX8 Semi-Mount, Hydraulic Offset, Rotary Cutter - 540 RPM PTOSerial Number P00MX8G018000 and above.

6,592.00









MX8 Semi-Mount, Hydraulic Offset, Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)





Two required. Also requires (2) M72431 and (2) A15146.See Parts









MX8 Semi-Mount, Hydraulic Offset, Rotary Cutter - 540 RPM PTOContinued








Cutting Width: 125.5 In. (3.19m)Transport Width: 129 In. (3.28m)Cutting Height: 1 to 12 In. (25 - 305mm)Blade Tip Speed: 16275 ft/min (82.7 m/s)Weld on Full Length Wear Shoes

Minimum Recommended Tractor PTO HP: 40 HPStandard Driveline (Equal Angle, Cat.4) -

540 RPM PTOLevel LiftRound Pan Bladeholder (Stump Jumper)Suction Blades (1/2 In. x 4 In.)Two Wheel Supports (Swiveling and Row

Width Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - ChainSafety Tow ChainJack with Mounting BracketsLift Cylinder and HoseLift Cylinder Depth Stops



SUGGESTEDLIST PRICE

USD ($)



2176P MX10 Pull-Type Center Drive Rotary Cutter - 540 RPM PTOSerial Number POMX10E0170000 and above.

7,590.00









MX10 Pull-Type Center Drive Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)









110.00


177.00




Miscellaneous:W45327 1/2 x 4" Blade (high suction) CCW


W45326 1/2 x 4" Blade (high suction) CWTwo required.

See Parts

AW29956 Clevis Kit - Clamp on Jaws with Special Drawbar PinTo reduce tractor drawbar and implement clevis wear.

See Parts






Safety Shields:BW14464 Front Safety Shield - Chain 316.00

BW14465 Rear Safety Shield - Chain 283.00





SUGGESTEDLIST PRICE

USD ($)




AW30717 21.0" x 5.25" x 9.0" Laminated Tire and WheelAdditional wheel and tire. Requires wheel support and hub.

110.00


204.00















Cutting Width: 125.5 In. (3.19m)Transport Width: 129 In. (3.28m)Cutting Height: 1 to 12 In. (25 - 305mm)Blade Tip Speed: 16275 ft/min (82.7 m/s)

Weld on Full Length Wear ShoesMinimum Recommended Tractor PTO HP:

6000 Series or equivalentStandard Driveline (Cat. 4) -

540 RPM 1-3/8 PTOHitch (Cat. II, III and IIIN 3-Point Hitch

with or without Quick Coupler)Round Pan Bladeholder (Stump Jumper)Suction Blades (1/2 In. x 4 In.)Two Wheel Supports (Swiveling,

Height Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - Chain



SUGGESTEDLIST PRICE

USD ($)



2177P MX10 Lift-Type Center Drive Rotary Cutter - 540 RPM PTOSerial Number P0MX10C017000 and above.

6,522.00









MX10 Lift-Type Center Drive Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)







See Parts









MX10 Lift-Type Center Drive Rotary Cutter - 540 RPM PTOContinued








Cutting Width: 125.5 In. (3.19m)Transport Width: 129 In. (3.28m)Cutting Height: 1 to 12 In. (25 - 305mm)

Blade Tip Speed: 16275 ft/min (82.7 m/s)Weld on Full Length Wear ShoesMinimum Recommended Tractor PTO HP: 40 HPStandard Driveline (Cat. 4) - 540 RPM PTORound Pan Bladeholder (Stump Jumper)Suction Blades (1/2 In. x 4 In.)Two Wheel Supports (Swiveling and Row

Width Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - ChainLift Cylinder and HoseLift Cylinder Depth Stops



SUGGESTEDLIST PRICE

USD ($)



2178P MX10 Semi-Mount Center Drive Rotary Cutter - 540 RPM PTOSerial Number P00MX10H017000 and above.

6,510.00


FRONT SAFETY SHIELDS1611 Front Safety Shield - Chain

Requires code 9070.In Base Price






MX10 Semi-Mount Center Drive Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9070 Semi-Mount Extension Brackets

Required with code 1611.99.00








See Parts




BW14552 Semi-Mount Extension BracketsRequired with code 1611.

99.00






MX10 Semi-Mount Center Drive Rotary Cutter - 540 RPM PTOContinued








Cutting Width: 125.5 In. (3.19m)Transport Width: 129 In. (3.28m)Cutting Height: 1 to 12 In. (25 - 305mm)Blade Tip Speed: 16275 ft/min (82.7 m/s)

Weld on Full Length Wear ShoesMinimum Recommended Tractor PTO HP: 40 HPOffset: 0-13" RIGHT or LEFTStandard Driveline (Cat. 4) - 540 RPM PTORound Pan Bladeholder (Stump Jumper)Suction Blades (1/2 In. x 4 In.)Two Wheel Supports (Swiveling and Row

Width Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - ChainOffset Cylinder and HosesLift Cylinder and HoseLift Cylinder Depth Stops



SUGGESTEDLIST PRICE

USD ($)



2179P MX10 Semi-Mount, Hydraulic Offset, Rotary Cutter - 540 RPM PTOSerial Number P0MX10G017000 and above.

7,574.00









MX10 Semi-Mount, Hydraulic Offset, Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)







See Parts









MX10 Semi-Mount, Hydraulic Offset, Rotary Cutter - 540 RPM PTOContinued


Pull TypeEasy Clean Dome Shaped Top DeckDeck Thickness:

Upper Deck Thickness: 0.118 In. (3.0mm)Lower Deck Thickness: 0.118 In. (3.0mm)

Four GearcasesPeak Drivetrain Horsepower Rating:

Splitter 300 HP (223 kW)Wing 100 HP (75 kW)

Continuous Drivetrain Horsepower Rating:Splitter 250 HP (183.8 kW)Wing 75 HP (55.1 kW)

1 - 3/4" Transfer Gearcase Input Shaft1 - 3/8" Center and Wing Gearcase Input Shaft2 In. Brush Cutting CapacityDouble Deck Design

10.5 In. (267 mm) Body Depth1/4 In. (6 mm) Side Shirt Thickness

15 Ft. (4.6 m) Cutting WidthBar Type Bladeholder (Stump Jumper)Single Suction Blades 1/2" (13 mm) x 4" (102 mm)Blade Tip Speed:

Center: 17040 fpm, 193.6 mph, 86.6 m/sWings: 17281 fpm, 196.4 mph, 87.8 m/s

3-Section Flexible 90 Degrees Up, 22 Degrees DownLevel Lift (ForeAft and Side-to-Side)Lift and Fold Hydraulics

Lift Cylinder Depth StopsDouble Leveling RodsEasy Adjust Wing Leveling TurnbucklesFour Wheels - 21" X 7" X 12" - 16 PR Severe Duty AGTiresFour Wheel Rigid Version4-Bolt Wheel HubsConstant Velocity and Lock-Slide CollarTractor to Cutter DrivelineThree Slip Clutches Factory PresetFront and Rear Safety Shields - ChainsSafety Tow ChainSMV Emblem and SupportFully AssembledMedium Duty RatingIntermittent, Greaseable HingesTubular Telescoping Driveshaft Members30 mm Pivot Pins with Single BushingsSimultaneous Wing LiftImplement Jack Kit

Front and Rear Safety Shields reduce the risk of thrown objects which could be hazardous.


SUGGESTEDLIST PRICE

USD ($)



2181P MX15 Flex-Wing Rotary Cutter - 540 RPM1 3/8" Constant Velocity Driveline Cat. 5, Bar Type Blade Holders, Single Suction Blades, 4Wheels - Rigid Axle, 21" x 7" x 12" 16 PR Severe Duty Ag Tires, Front and Rear Safety ChainShields, 10,000 LB (45 kN) Safety Tow Chain.Serial Number P0MX15E002000 and above.

14,795.00


Miscellaneous:9030 Independent Control Valve - 3-Function with Hoses and ROPS Mounting Bracket

(For Separate Wing and Lift Control)Can be used with either open or closed center hydraulics.

701.00

9050 Extra Wing Cylinder Hose 84.00

9055 Implement Jack KitIncludes TY25778 - 15 inch, 5000 lb. side wind crank implement jack.

264.00



MX15 Flex-Wing Rotary Cutter - 540 RPMEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED ...Continued...9100 Spanish Operator's Manual and Decal Kit No Charge

Wheels and Tires:9023 Dual Wing Wheel Spindles, Hubs and 21" x 7" x 12" 16 PR Severe

Duty Ag TiresCan also be used to provide dual wheels for center section.

823.00


Miscellaneous:BW15083 Extra Wing Cylinder Hose 84.00


BWA1405 Implement Jack KitIncludes TY25778 - 15 inch, 5000 lb. side wind crank implement jack.

264.00

BW15063 Independent Control Valve - 3-Function with Hoses and ROPS Mounting Bracket(For Separate Wing and Lift Control)Can be used with either open or closed center hydraulics.

701.00


Wheels and Tires:AW34778 21" x 7" x 12" 16 PR Severe Duty Ag Tire and Wheel 177.00

BW14521 Dual Wing Wheel Spindles and Hubs 469.00

BWA1245 Dual Wing Wheel Spindles, Hubs and 21" x 7" x 12" 16 PR SevereDuty Ag TiresCan also be used to provide dual wheels for center section.

823.00


MX15 Flex-Wing Rotary Cutter - 540 RPMContinued


72 In. (1.83 m) Cutting Width4 In. (10.16 cm) Brush Cutting CapacityHeavy Duty ConstructionUnibody FrameCategory II or IIINSlip Clutch ProtectionShielded Driveline - 540 RPMFlat BladesPuncture Proof Laminated TireSafety Shields - Front and Rear Chain

(Includes Solid Rear Safety Shield)Less Safety ChainBar Type Blade Holder


SUGGESTEDLIST PRICE

USD ($)



1836P 609 Heavy Duty Integral Rotary Cutter with Shielded DrivelineSerial Number P00609C068000 and above.

4,632.00

BLADES1300 Flat Blades In Base Price

WHEEL AND TIRE1530 Puncture Proof Laminated Tire In Base Price

SAFETY SHIELDFront and rear safety shields reduce the risk of thrown objects which could be hazardous.

1640 Front and Rear (Chain) Safety Shields with Rear (Solid) Safety Shield In Base Price

SAFETY CHAINSafety Chains are required to secure hitch to tractor when towing on roadways. All tractorsmust be equipped with an intermediate chain support ahead of hitch pin. If tractor is not soequipped, see tractor section of the Agricultural Sales Manual.

6060 Less Safety Chain In Base Price


Miscellaneous:9099 French Operator's Manual and Decal Kit No Charge




609 Heavy Duty Integral Rotary Cutter with Shielded DrivelineEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)


Hitch:AR27093 Quik-Coupler Adapter Bushing

For Tractors Equipped with Quik-Coupler.See Parts




BW12402 Rear Safety Shield - ChainRequires BW12412 Rear Safety Chain Shield - Solid.

270.00

BW12412 Rear Safety Shield - SolidFor added shredding and/or safety.

210.00


609 Heavy Duty Integral Rotary Cutter with Shielded DrivelineContinued


84 In. (2.13 m) Cutting Width4 In. (10.16 cm) Brush Cutting CapacityHeavy Duty ConstructionUnibody FrameCategory II or IIINSlip Clutch ProtectionShielded Driveline - 540 RPMFlat BladesPuncture Proof Laminated TireBar Type Blade Holder

Safety Shields - Front and Rear Chain(Includes Solid Rear Safety Shield)

Less Safety Chain


SUGGESTEDLIST PRICE

USD ($)



178KP 709 Heavy Duty Integral Rotary Cutter with Shielded DrivelineSerial Number P00709C071000 and above.

5,936.00

BLADES1300 Flat Blades In Base Price

WHEEL AND TIRE1530 Puncture Proof Laminated Tire In Base Price

SAFETY SHIELDFront and rear safety shields reduce the risk of thrown objects which could be hazardous.

1640 Front and Rear (Chain) Safety Shields with Rear (Solid) Safety Shield In Base Price

SAFETY CHAINSafety Chains are required to secure hitch to tractor when towing on roadways. All tractorsmust be equipped with an intermediate chain support ahead of hitch pin. If tractor is not soequipped, see tractor section of the Agricultural Sales Manual.

6060 Less Safety Chain In Base Price


Miscellaneous:9099 French Operator's Manual and Decal Kit No Charge




709 Heavy Duty Integral Rotary Cutter with Shielded DrivelineEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)


Hitch:AR27093 Quik-Coupler Adapter Bushing

For Tractors Equipped with Quik-Coupler.See Parts




BW12403 Rear Safety Shield - ChainRequires BW12413 Rear Safety Chain Shield - Solid.

270.00

BW12413 Rear Safety Shield - SolidFor added shredding and/or safety.

210.00


709 Heavy Duty Integral Rotary Cutter with Shielded DrivelineContinued



Upper Deck - 0.138" (3.5mm)Lower Deck - 0.138" (3.5mm)Total - 0.28" (7.0mm)


200 Peak HP (149 kW)Outer - 100 Continuous HP (74.5 kW);

135 Peak HP (100 kW)1-3/4" Gearcase Input Shafts3 In. Brush Cutting CapacityRound Pan Bladeholder (Stump Jumper)Shock Absorbing Cross ShaftsSlip Clutch ProtectionUnibody Frame:

10.5 In. (267mm) Body Depth1/4 In. (6mm) Skirt Thickness

Cutting Width: 126 In. (3.20m)Transport Width: 132 In. (3.35m)Cutting Height: 1 to 12 In. (25 - 305mm)Blade Tip Speed: 16889 ft/min (85.8 m/s)

Replaceable Full Length Wear ShoesMinimum Recommended Tractor PTO HP: 50 HPConstant Velocity Driveline with

Lock-Slide Collar -540 RPM (Cat. 4) - 1-3/8 PTO

Level LiftSuction Blades (1/2 In. x 4 In.)Two Wheel Supports (Swiveling, Height

and Row Width Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - ChainSafety Tow ChainJack with Mounting BracketsLift Cylinder and HosesLift Cylinder and Depth Stops



SUGGESTEDLIST PRICE

USD ($)



2217P HX10 Pull-Type Center Drive Rotary Cutter - 540 RPM PTOSerial Number P0HX10C010000 and above.

9,147.00

DRIVELINES1010 Constant Velocity Driveline with Lock-Slide Collar - 540 RPM PTO In Base Price







HX10 Pull-Type Center Drive Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

SAFETY TOW CHAIN ...Continued...










110.00


177.00


Drivelines:BP18396 Constant Velocity Driveline with Lock- Slide Collar - 540 RPM PTO 968.00












HX10 Pull-Type Center Drive Rotary Cutter - 540 RPM PTOContinued



SUGGESTEDLIST PRICE

USD ($)





110.00


204.00












200 Peak HP (149 kW)Outer - 100 Continuous HP (74.5 kW);

135 Peak HP (100 kW)1-3/4" Gearcase Input Shafts3 In. Brush Cutting CapacityRound Pan Bladeholder (Stump Jumper)Shock Absorbing Cross ShaftsSlip Clutch ProtectionUnibody Frame:


Cutting Width: 126 In. (3.20m)Transport Width: 132 In. (3.35m)Cutting Height: 1 to 12 In. (25 - 305mm)Blade Tip Speed: 16889 ft/min (85.8 m/s)

Replaceable Full Length Wear ShoesMinimum Recommended Tractor PTO HP:

6000 Series or equivalentStandard Driveline with

Lock-Slide Collar (Cat. 4) -540 RPM 1-3/8 PTO

Integral Hitch (Cat. II, III andIIIN 3-Point Hitch with or withoutQuick Coupler)

Suction Blades (1/2 In. x 4 In.)Two Wheel Supports (Swiveling, Height

and Row Width Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - Chain



SUGGESTEDLIST PRICE

USD ($)



2218P HX10 Lift-Type Center Drive Rotary Cutter - 540 RPM PTOSerial Number P0HX10C010000 and above.

8,578.00

DRIVELINES1050 Standard Driveline with Lock-Slide Collar - 540 RPM PTO In Base Price

WHEELS AND TIRES1250 Two Puncture Proof 15" Laminated, Wide Track Tires In Base Price






HX10 Lift-Type Center Drive Rotary Cutter - 540 RPM PTOEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)











Wheels and Tires:AW33090 Tire and tube kit for 21" x 7" x 12" Severe Duty Ag Tire See Parts


HX10 Lift-Type Center Drive Rotary Cutter - 540 RPM PTOContinued


Three Gearcases, Power Ratings:Center - 160 Continuous HP (119 kW);


120 Peak HP (89.4 kW)1-3/4 In. Gearcase Input Shafts2 In. Brush Cutting CapacityShock Absorbing Cross ShaftsSlip Clutch ProtectionUnibody Frame:


Cutting Width: 165 In. (4.19m)Transport Width: 171 In. (4.35m)Cutting Height: 1-12 In. (25-305mm)Blade Tip Speed: 14896 ft/min (75.7 m/s)Replaceable Full Length Wear ShoesTransport Warning LightsMinimum Recommended Tractor PTO HP:

7610 or equivalentStandard Driveline with


Integral Hitch (Cat. II, III andIIIN 3-Point Hitch with orwithout Quick Coupler)

Bar Type Bladeholder and Dual Suction BladesTwo Wheel Supports (Swiveling, Height and

Row Width Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - Solid

Front and rear safety shields reduce the risk of thrown objects which could be hazardous. The base rotary cutter is designed for agricultural applicationsonly. This machine shall not be used in areas where bystanders may be present and could be injured or where property could be damaged by thrownobjects.


SUGGESTEDLIST PRICE

USD ($)



2225P HX14 Lift-Type Rotary Cutter - 1000 RPM PTOBar Type BladeholderSerial Number P0HX14D008500 and above.

10,739.00

DRIVELINES1060 Standard Driveline with Lock-Slide Collar - 1000 RPM 1-3/8 PTO In Base Price

1070 Standard Driveline with Lock-Slide Collar - 1000 RPM 1-3/4 PTO 170.00




REAR SAFETY SHIELDS1700 Rear Safety Shield - Solid (For Additional Shredding and/or Safety) In Base Price

SAFETY TOW CHAIN


HX14 Lift-Type Rotary Cutter - 1000 RPM PTOBar Type BladeholderEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

SAFETY TOW CHAIN ...Continued...6095 Less Safety Tow Chain In Base Price


Miscellaneous:9080 SMV Emblem and Support 50.00



Wheels and Tires:9020 Third or Fourth Lift-Type Wheel Support and Hub



110.00


177.00


Drivelines:BP18398 Standard Driveline with Clutch and Lick-Slide Collar - 1000 RPM 1-3/4 PTO 1,092.00

BP18397 Standard Driveline with Clutch and Lock-Slide Collar - 1000 RPM 1-3/8 PTO 909.00





BW14339 Rear Safety Shield - Solid 156.00




110.00


HX14 Lift-Type Rotary Cutter - 1000 RPM PTOBar Type Bladeholder

Continued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW14333 Third or Fourth Lift-Type Wheel Support and Hub





Continued




Continued









Cutting Width: 165 In. (4.19m)Transport Width: 171 In. (4.35m)Cutting Height: 1-12 In. (25-305mm)Blade Tip Speed: 14896 ft/min (75.7 m/s)Replaceable Full Length Wear Shoes

Transport Warning LightsMinimum Recommended Tractor PTO HP: 60 HPConstant Velocity Driveline with

Lock-Slide Collar -1000 RPM (Cat. 4) 1-3/8 PTO

Level LiftBar Type BladeholderDual Suction BladesTwo Wheel Supports (Row Width Adjustable)Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - SolidSafety Tow ChainJack with Mounting BracketsLift Cylinder and Hose(s)Lift Cylinder Depth Stops



SUGGESTEDLIST PRICE

USD ($)



2226P HX14 Pull-Type Rotary Cutter - 1000 RPM PTOBar Type BladeholderSerial Number P0HX14F008500 and above.

10,426.00

DRIVELINES1030 Constant Velocity Driveline with Lock-Slide Collar - 1000 RPM 1-3/8 PTO In Base Price

1040 Constant Velocity Driveline with Lock-Slide Collar - 1000 RPM 1-3/4 PTO 195.00






HX14 Pull-Type Rotary Cutter - 1000 RPM PTOBar Type BladeholderEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

REAR SAFETY SHIELDS ...Continued...










110.00


177.00


Drivelines:BP18395 Constant Velocity Driveline with Lock-Slide Collar - 1000 RPM 1-3/4 PTO 1,143.00

BP18414 Constant Velocity Driveline with Lock-Slide Collar - 1000 RPM 1-3/8 PTO 932.00









HX14 Pull-Type Rotary Cutter - 1000 RPM PTOBar Type Bladeholder

Continued



SUGGESTEDLIST PRICE

USD ($)







110.00


204.00




Continued




Continued









Cutting Width: 165 In. (4.19m)Transport Width: 171 In. (4.35m)Cutting Height: 1-12 In. (25-305mm)Blade Tip Speed: 14896 ft/min (75.7 m/s)Replaceable Full Length Wear Shoes

Transport Warning LightsMinimum Recommended Tractor PTO HP:

7610 or equivalentStandard Driveline with


Integral Hitch (Cat. II, III andIIIN 3-Point Hitch with orwithout Quick Coupler)

Round Pan Bladeholder (Stump Jumper) andSingle Suction Blades

Two Wheel Supports (Swiveling, Height andRow Width Adjustable)

Two Puncture Proof Laminated TiresFront Safety Shield - ChainRear Safety Shield - Solid



SUGGESTEDLIST PRICE

USD ($)



2227P HX14 Lift-Type Rotary Cutter - 1000 RPMRound Pan Bladeholder - Stump JumperSerial Number P0HX14D008500 and above.

10,165.00

DRIVELINES1060 Standard Driveline with Lock-Slide Collar - 1000 RPM 1-3/8 PTO In Base Price

1070 Standard Driveline with Lock-Slide Collar - 1000 RPM 1-3/4 PTO 170.00






HX14 Lift-Type Rotary Cutter - 1000 RPMRound Pan Bladeholder - Stump Jumper

Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

REAR SAFETY SHIELDS ...Continued...






Wheels and Tires:9020 Third or Fourth Lift-Type Wheel Support and Hub



110.00


177.00


Drivelines:BP18398 Standard Driveline with Clutch and Lick-Slide Collar - 1000 RPM 1-3/4 PTO 1,092.00

BP18397 Standard Driveline with Clutch and Lock-Slide Collar - 1000 RPM 1-3/8 PTO 909.00










Continued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AW30717 21.0" x 5.25" x 9.0" Laminated Tire and Wheel


BW14333 Third or Fourth Lift-Type Wheel Support and HubAdditional wheel support and hub. Requires wheel and tire.

380.00




Continued




Continued



Pull TypeEasy Clean Dome Shaped Top DeckDeck Thickness:




Continuous Drivetrain Horsepower Rating:Splitter 250 HP (186 kW)Wing 120 HP (89.4 kW)

1-3/4 In. Gearcase Input Shafts3 In. Brush Cutting CapacityUnibody Frame:

10.5 In. (267mm) Body Depth1/4 In. (6mm) Side Skirt Thickness

15 Ft. (4.6 m) Cutting WidthBlade Tip Speed:

Center: 15733 fpm, 178.8 mph, 79.9 m/sWing: 15586 fpm, 177.1 mph, 79.2 m/s

3-Section Flexible 90 Degrees Up,22 Degrees Down

Level Lift (Fore/Aft and Side-to-Side)Lift and Fold HydraulicsLift Cylinder Depth StopsDouble Leveling RodsEasy Adjust Wing Leveling TurnbucklesAdjustable Wheel Spacing

(Refer to Ag Sales Manual for availablerow spacings, especially for ridge-tillapplications)

21" x 5.25" x 9" Puncture ProofLaminated Tires

Constant Velocity and Lock-Slide CollarTractor-to-Cutter Driveline

Three Slip Clutches, Factory Preset,Self Adjusting

Front and Rear Safety Shields - ChainsBolt-On Wear ShoesSafety Tow ChainHitch Integrated Jack Stand, Implement JackSMV Emblem and SupportFully AssembledHeavy Duty RatingIntermittent, Greaseable HingesTubular Telescoping Driveshaft MembersStandard Self Level Hitch Clevis30mm Pivot Pins with Single BushingsSix Wheel Spring Suspension4-Bolt Wheel HubsSimultaneous Wing Lift

Front and rear safety shields reduce the risk of thrown objects which could be hazardous.


SUGGESTEDLIST PRICE

USD ($)



227BP HX15 Flex-Wing Rotary Cutter - 540 RPMStump Jumpers - Single Suction Blades - 6 WheelsSerial Number P0HX15E018500 and above.

17,818.00

DRIVELINES1000 Constant Velocity with Lock-Slide Collar Driveline, Cat 5, 540 RPM In Base Price

WHEELS AND TIRES1200 21.0" x 5.25" x 9.0" Puncture Proof Laminated Tires In Base Price

1210 21" x 7" x 12" 16 PR Severe Duty Ag Tires 366.00


1620 Front Safety Shield - Second Row Chain 123.00


HX15 Flex-Wing Rotary Cutter - 540 RPMStump Jumpers - Single Suction Blades - 6 Wheels




SUGGESTEDLIST PRICE

USD ($)

FRONT SAFETY SHIELDS ...Continued...


1720 Rear Safety Shield - Second Row Chain 123.00


6010 10,000 Lb. (45kN) Chain In Base Price


Miscellaneous:9010 Anti-Windrow Kit for Heavy Crops 413.00

9030 Independent Control Valve - 3-Function with Hoses and ROPS Mounting Bracket(For Separate Wing and Lift Control)Can be used with either open or closed center hydraulics.

701.00



264.00



Wheels and Tires:9022 Dual Wing Wheel Spindles, Hubs and 21.0" x 5.25" x 9.0" Puncture

Proof Laminated TiresCan also be used to provide dual wheels for center section.

689.00

9023 Dual Wing Wheel Spindles, Hubs and 21" x 7" x 12" 16 PR SevereDuty Ag Tires

823.00


Drivelines:BP18399 Constant Velocity with Lock-Slide Collar Driveline, Cat 5, 540 RPM - 1 3/8 In. 1,153.00





Continued



SUGGESTEDLIST PRICE

USD ($)


Miscellaneous:BW14584 Anti-Windrow Kit for Heavy Crops 413.00

W49091 Deck Ring (Center Section)Three required.

See Parts

W49092 Deck Ring (Wing Sections)Three required.

See Parts

BW15083 Extra Wing Cylinder Hose 84.00



264.00


701.00


Safety Shields:BW15670 Front Safety Shield - Second Row Chain 677.00

BW15671 Rear Safety Shield - Second Row Chain 677.00

Weight Box:AW33895 Weight Box

To replace left wing for conversion from 15 Ft. to 10 Ft. flex wing.See parts catalog for other parts needed for conversion.

See Parts


AW30717 21.0" x 5.25" x 9.0" Laminated Tire and Wheel 110.00

BW14521 Dual Wing Wheel Spindles and Hubs1 Bolt.

469.00

BWA1245 Dual Wing Wheel Spindles, Hubs and 21" x 7" x 12" 16 PR SevereDuty Ag Tires

823.00

BWA1244 Dual Wing Wheel Spindles, Hubs and 21.0" x 5.25" x 9.0" PunctureProof Laminated TiresCan also be used to provide dual wheels for center section.

689.00



Continued




Continued



Pull TypeDouble Deck DesignEasy Clean Dome Shaped Top DeckDeck Thickness:












21" x 5.25" x 9" Puncture ProofLaminated Tires



Front and Rear Safety Shields - ChainsBolt-On Wear ShoesSafety Tow ChainHitch Integrated Jack Stand, Implement JackSMV Emblem and SupportFully AssembledHeavy Duty RatingIntermittent, Greaseable HingesTubular Telescoping Driveshaft MembersStandard Self Level Hitch Clevis30mm Pivot Pins with Single BushingsSix Wheel Spring Suspension4-Bolt Wheel HubsSimultaneous Wing Lift



SUGGESTEDLIST PRICE

USD ($)



227CP HX15 Flex-Wing Rotary Cutter - 1000 RPMStump Jumpers - Single Suction Blades - 6 WheelsSerial Number P0HX15F018500 and above.

17,818.00

DRIVELINES1010 Constant Velocity with Lock-Slide Collar Driveline, Cat 5, 1000 RPM - 1-3/8 In. In Base Price

1030 Constant Velocity with Lock-Slide Collar Driveline, Cat 5, 1000 RPM - 1-3/4 In. 45.00

WHEELS AND TIRES1200 21.0" x 5.25" x 9.0" Puncture Proof Laminated Tires In Base Price

1210 21" x 7" x 12" 16 PR Severe Duty Ag Tires 366.00

FRONT SAFETY SHIELDS






SUGGESTEDLIST PRICE

USD ($)

FRONT SAFETY SHIELDS ...Continued...1600 Front Safety Shield - Chain In Base Price









701.00



264.00




Proof Laminated TiresCan also be used to provide dual wheels for center section.

689.00

9023 Dual Wing Wheel Spindles, Hubs and 21" x 7" x 12" 16 PR SevereDuty Ag Tires

823.00



BP18400 Constant Velocity with Lock-Slide Collar Driveline, Cat 5, 1000 RPM - 1 3/8 In. 1,155.00



Continued



SUGGESTEDLIST PRICE

USD ($)






See Parts


See Parts




264.00


701.00






See Parts




469.00


823.00

BWA1244 Dual Wing Wheel Spindles, Hubs and 21.0" x 5.25" x 9.0" PunctureProof Laminated TiresCan also be used to provide dual wheels for center section.

689.00



Continued




Continued







3 In. Brush Cutting Capacity1-3/4 In. Gearcase Input ShaftsUnibody Frame:


15 Ft. (4.6m) Cutting WidthBlade Tip Speed:



Level Lift (Fore/Aft and Side-to-Side)Lift and Fold HydraulicsLift Cylinder Depth StopsDouble Leveling RodsEasy Adjust Wing Leveling Turnbuckles

Adjustable Wheel Spacing(Refer to Ag Sales Manual for availablerow spacings, especially for ridge-tillapplications)

21" x 7" x 12" 16 PR Severe Duty Ag TiresConstant Velocity and Lock-Slide Collar

Tractor-to-Cutter DrivelineThree Slip Clutches, Factory Preset,

Self AdjustingFront and Rear Safety Shields - ChainsBolt-On Wear ShoesSafety Tow ChainHitch Integrated Jack Stand, Implement JackSMV Emblem and SupportFully AssembledHeavy Duty RatingIntermittent, Greaseable HingesTubular Telescoping Driveshaft MembersStandard Self Level Hitch Clevis30mm Pivot Pins with Single BushingsSix Wheel Spring Suspension4-Bolt Wheel HubsSimultaneous Wing Lift



SUGGESTEDLIST PRICE

USD ($)



227DP HX15 Flex-Wing Rotary Cutter - 1000 RPMBar Type Bladeholders - Dual Suction Blades - 6 WheelsSerial Number P0HX15F018500 and above.

18,731.00

DRIVELINES1010 Constant Velocity with Lock-Slide Collar Driveline, Cat 5, 1000 RPM - 1-3/8 In. In Base Price

1030 Constant Velocity with Lock-Slide Collar Driveline, Cat 5, 1000 RPM - 1-3/4 In. 45.00

WHEELS AND TIRES1210 21" x 7" x 12" 16 PR Severe Duty Ag Tires In Base Price




HX15 Flex-Wing Rotary Cutter - 1000 RPMBar Type Bladeholders - Dual Suction Blades - 6 Wheels




SUGGESTEDLIST PRICE

USD ($)









701.00



264.00




Duty Ag Tires823.00








Continued



SUGGESTEDLIST PRICE

USD ($)




See Parts


See Parts




264.00


701.00






See Parts




469.00


823.00



Continued




Continued





Three GearcasesPeak Drivetrain Horsepower Rating:


Continuous Drivetrain Horsepower Rating:Splitter 250 HP (86 kW)Wing 120 HP (89 kW)

3 In. Brush Cutting Capacity1-3/4 In. Gearcase Input ShaftsUnibody Frame:

10.5 In. (267mm) Body Depth1/4 In (6mm) Side Skirt Thickness

10 Ft. (3m) Cutting WidthBlade Tip Speed:


Center section, right side wing andweight box on left side




Five Wheels - 26" X 9" X 14.5" - 24 PR"Fat Boy" Severe Duty Ag Tires

Constant Velocity with Lock-Slide CollarTractor-to-Cutter Driveline

Two Slip Clutches, Factory Preset,Self Adjusting

Front and Rear Double Row Safety Shields - ChainsBolt-On Wear ShoesSafety Tow ChainHitch Integrated Jack Stand, Implement JackSMV Emblem and SupportFully AssembledCommercial Duty RatingDeck RingsContinuous, Full Length, Greaseable HingesSplined Telescoping Driveshaft MembersBall Type Self Level Hitch Clevis30 mm Pivot Pins with Double BushingsAir Cushioned Suspension with

Shock Absorbers5-Bolt Wheel HubsIndependent Wing Lift


SUGGESTEDLIST PRICE

USD ($)



225CP CX15 - 10 Ft. Flex-Wing Rotary Cutter - 540 RPMStump Jumpers - Single Suction Blades - 5 WheelsSerial Number P0CX15G008500 and above.

16,241.00


Miscellaneous:9055 Implement Jack Kit

Includes TY25778 - 15 inch, 5000 lb. side wind crank implement jack.264.00





CX15 - 10 Ft. Flex-Wing Rotary Cutter - 540 RPMStump Jumpers - Single Suction Blades - 5 Wheels




SUGGESTEDLIST PRICE

USD ($)





264.00





CX15 - 10 Ft. Flex-Wing Rotary Cutter - 540 RPMStump Jumpers - Single Suction Blades - 5 Wheels

Continued








10.5 In. (267mm) Body Depth1/4 In. (6mm Side Skirt Thickness





(Refer to Ag Sales Manual for available

row spacings, especially for ridge-tillapplications)

Six Wheels - 21" x 5.25" x 9"Puncture Proof Laminated Tires



Front and Rear Safety Shields - ChainsBolt-On Wear ShoesSafety Tow ChainHitch Integrated Jack Stand, Implement JackSMV Emblem and SupportFully AssembledCommercial Duty RatingDeck RingsContinuous, Full Length, Greaseable HingesSplined Telescoping Driveshaft MembersBall Type Self Level Hitch Clevis30 mm Pivot Pins with Double BushingsAir Cushioned Suspension with



SUGGESTEDLIST PRICE

USD ($)



225AP CX15 Flex-Wing Rotary Cutter - 540 RPMStump Jumpers - Single Suction BladesSerial Number P0CX15E008500 and above.

19,797.00

DRIVELINES1000 Constant Velocity with Lock-Slide Collar Driveline, Cat. 5, 540 RPM In Base Price

WHEELS AND TIRES1200 21.0" x 5.25" x 9.00" Puncture-Proof Laminated Tires In Base Price

1220 26" x 9" x 14.5" 24 Ply "Fat Boy" Severe Duty Ag Tires 570.00




CX15 Flex-Wing Rotary Cutter - 540 RPMStump Jumpers - Single Suction Blades




SUGGESTEDLIST PRICE

USD ($)




SAFETY TOW CHAINSafety Chains are required to secure hitch to Tractor when towing on roadways. All Tractorsmust be equipped with an intermediate chain support ahead of hitch pin. If Tractor is not soequipped, see Tractor section of the Agricultural Sales Manual.





701.00


264.00




Proof Laminated Tires680.00

9025 Dual Wing Wheel Spindles, Hubs and 26" x 9" x 14.5" 24 PR "Fat Boy"Severe Duty Ag Tires

889.00








Continued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW14560 French Operator's Manual and Decal Kit No Charge


264.00


701.00






See Parts

Wheels and Tires:AW30747 21.0" x 5.25" x 9.0" Laminated Tire and Wheel 121.00

AW34779 26" x 9" x 14.5" 24 PR "Fat Boy" Severe DutyAg Tire and Wheel

226.00

BWA1246 Dual Wing Wheel Spindles, Hubs and 21.0" x 5.25" x 9.0" PunctureProof Laminated Tires

680.00

BWA1247 Dual Wing Wheel Spindles, Hubs and 26" x 9" x 14.5" 24 PR "Fat Boy"Severe Duty Ag Tires

889.00



Continued




Continued














(Refer to Ag Sales Manual for available

row spacings, especially for ridge-tillapplications)

Six Wheels - 21" x 5.25" x 9"Puncture Proof Laminated Tires



Front and Rear Safety Shields - ChainsBolt-On Wear ShoesSafety Tow ChainHitch Integrated Jack Stand, Implement JackSMV Emblem and SupportFully AssembledCommercial Duty RatingDeck RingsContinuous, Full Length, Greaseable HingesSplined Telescoping Driveshaft MembersBall Type Self Level Hitch Clevis30 mm Pivot Pins with Double BushingsAir Cushioned Suspension with



SUGGESTEDLIST PRICE

USD ($)



225BP CX15 Flex-Wing Rotary Cutter - 1000 RPMStump Jumpers - Single Suction BladesSerial Number P0CX15F008500 and above.

19,797.00

DRIVELINES1010 Constant Velocity with Lock-Slide Collar Driveline, Cat. 5, 1000 RPM, 1-3/8 In. In Base Price

1030 Constant Velocity with Lock-Slide Collar Driveline, Cat. 5, 1000 RPM, 1-3/4 In. 45.00

WHEELS AND TIRES1200 21.0" x 5.25" x 9.00" Puncture-Proof Laminated Tires In Base Price

1220 26" x 9" x 14.5" 24 Ply "Fat Boy" Severe Duty Ag Tires 570.00







SUGGESTEDLIST PRICE

USD ($)





SAFETY TOW CHAINSafety Chains are required to secure hitch to Tractor when towing on roadways. All Tractorsmust be equipped with an intermediate chain support ahead of hitch pin. If Tractor is not soequipped, see Tractor section of the Agricultural Sales Manual.





701.00


264.00




Proof Laminated Tires680.00

9025 Dual Wing Wheel Spindles, Hubs and 26" x 9" x 14.5" 24 PR "Fat Boy"Severe Duty Ag Tires

889.00








Continued



SUGGESTEDLIST PRICE

USD ($)





264.00


701.00






See Parts

Wheels and Tires:AW30747 21.0" x 5.25" x 9.0" Laminated Tire and Wheel 121.00

AW34779 26" x 9" x 14.5" 24 PR "Fat Boy" Severe DutyAg Tire and Wheel

226.00

BWA1246 Dual Wing Wheel Spindles, Hubs and 21.0" x 5.25" x 9.0" PunctureProof Laminated Tires

680.00


889.00



Continued




Continued











16087 fpm, 182.8 mph, 81.7 m/s3-Section Flexible 90 Degrees Up,

22 Degrees DownLevel Lift (Fore/Aft and Side-to-Side)Lift and Fold HydraulicsLift Cylinder Depth StopsDouble Leveling RodsEasy Adjust Wing Leveling TurnbucklesAdjustable Wheel Spacing


Six Wheels - 21" x 7" x 12" 16 PRSevere Duty Ag Tires



Front and Rear Safety Shields - ChainsBolt-On Wear ShoesSafety Tow ChainHitch Integrated Jack Stand, Implement JackSMV Emblem and SupportFully AssembledHeavy Duty RatingIntermittent, Greaseable HingesTubular Telescoping Driveshaft MembersStandard Self-Level Hitch Clevis30mm Pivot Pins with Single BushingsStandard Spring Suspension4-Bolt Wheel HubsSimultaneous Wing Lift



SUGGESTEDLIST PRICE

USD ($)



2247P HX20 Flex-Wing Rotary Cutter - 540 RPMStump Jumpers - Single Suction BladesSerial Number P0HX20E006500 and above.

23,227.00

DRIVELINES1000 Constant Velocity with Lock-Slide Collar Driveline, Cat. 5, 540 RPM In Base Price




REAR SAFETY SHIELDS


HX20 Flex-Wing Rotary Cutter - 540 RPMStump Jumpers - Single Suction Blades




SUGGESTEDLIST PRICE

USD ($)

REAR SAFETY SHIELDS ...Continued...1700 Rear Safety Shield - Chain In Base Price







701.00



264.00




Duty Ag Tires823.00





W49089 Deck RingNine required.

See Parts





Continued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...W50394 HX20 Center Section Wheel Spindle for 38 In. Rows



264.00


701.00


Safety Shields:BW15672 Front Safety Shield - Second Row Chain 1,184.00

BW15673 Rear Safety Shield - Second Row Chain 1,144.00


To replace left wing for conversion from 20 Ft. to 13.5 Ft. flex wing.See parts catalog for other parts needed for conversion.

See Parts




823.00



Continued




Continued











16346 fpm, 185.7 mph, 83 m/s3-Section Flexible 90 Degrees Up,









SUGGESTEDLIST PRICE

USD ($)



2248P HX20 Flex-Wing Rotary Cutter - 1000 RPMStump Jumpers - Single Suction BladesSerial Number P0HX20F006500 and above.

23,227.00

DRIVELINES1010 Constant Velocity with Lock-Slide Collar Driveline, Cat. 5, 1000 RPM - 1-3/8 In. In Base Price

1030 Constant Velocity with Lock-Slide Collar Driveline, Cat. 5, 1000 RPM - 1-3/4 In. 45.00









SUGGESTEDLIST PRICE

USD ($)









701.00



264.00




Duty Ag Tires823.00








Continued



SUGGESTEDLIST PRICE

USD ($)




See Parts



W50394 HX20 Center Section Wheel Spindle for 38 In. RowsTwo required.

See Parts


264.00


701.00






See Parts





823.00



Continued




Continued




















SUGGESTEDLIST PRICE

USD ($)



2249P HX20 Flex-Wing Rotary Cutter - 1000 RPMBar Type Bladeholders - Dual Suction BladesSerial Number P0HX20G006500 and above.

23,606.00







HX20 Flex-Wing Rotary Cutter - 1000 RPMBar Type Bladeholders - Dual Suction Blades




SUGGESTEDLIST PRICE

USD ($)








9011 Shredding Attachment 1,097.00


701.00



264.00




Duty Ag Tires823.00








Continued



SUGGESTEDLIST PRICE

USD ($)




See Parts



W50394 HX20 Center Section Wheel Spindle for 38 In. RowsTwo required.

See Parts


264.00


701.00

BWA1489 Shredding Attachment 1,097.00






See Parts




823.00



Continued




Continued













(Refer to Ag Sales Manual for availablerow spacings, especially for ridge-till

applications)Six Wheels - 26" x 9" x 14.5" 24 Ply

"Fat Boy" Severe Duty Ag TiresConstant Velocity and Lock-Slide Collar


Self AdjustingFront and Rear Safety Shields - ChainsBolt-On Wear ShoesSafety Tow ChainHitch Integrated Jack Stand, Implement JackSMV Emblem and SupportFully AssembledCommercial Duty RatingDeck RingsContinuous, Full Length, Greaseable HingesSplined Telescoping Driveshaft MembersBall Type Self Level Hitch Clevis30mm Pivot Pins with Double BushingsAir Cushioned Suspension with

Shock Absorbers5-Bolt Wheel HubsIndependent Wing LiftFull Profile Material

Distribution Deflectors



SUGGESTEDLIST PRICE

USD ($)



2264P CX20 Flex-Wing Rotary Cutter - 1000 RPMStump Jumpers - Single Suction BladesSerial Number P0CX20F005000 and above.

30,178.00



WHEELS AND TIRES1220 26" x 9" x 14.5" 24 Ply "Fat Boy" Severe Duty Ag Tires In Base Price







SUGGESTEDLIST PRICE

USD ($)

FRONT SAFETY SHIELDS ...Continued...1620 Front Safety Shield - Second Row Chain 356.00






Miscellaneous:9030 Independent Control Valve - 3-Function with Hoses and ROPS Mounting Bracket

(For Separate Wing and Lift Control)Can be used with either open or closed center hydraulics.

701.00


264.00



Wheels and Tires:9025 Dual Wing Wheel Spindles, Hubs and 26" x 9" x 14.5" 24 PR "Fat Boy"

Severe Duty Ag Tires889.00






Miscellaneous:W50393 CX20 Center Section Wheel Spindle for 38 In. Rows





Continued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BWA1405 Implement Jack Kit

Includes TY25778 - 15 inch, 5000 lb. side wind crank implement jack.264.00


701.00






See Parts

Wheels and Tires:AW34779 26" x 9" x 14.5" 24 PR "Fat Boy" Severe Duty

Ag Tire and Wheel226.00



889.00

AW33092 Tire and tube kit for 26" x 9" x 14.5" 'Fat Boy' Severe Duty Ag Tire See Parts



Continued




Continued













(Refer to Ag Sales Manual for availablerow spacings, especially for ridge-till

applications)Six Wheels - 26" x 9" x 14.5" 24 Ply

"Fat Boy" Severe Duty Ag TiresConstant Velocity and Lock-Slide Collar


Self AdjustingFront and Rear Safety Shields - ChainsBolt-On Wear ShoesSafety Tow ChainHitch Integrated Jack Stand, Implement JackSMV Emblem and SupportFully AssembledCommercial Duty RatingDeck RingsContinuous, Full Length, Greaseable HingesSplined Telescoping Driveshaft MembersBall Type Self Level Hitch Clevis30mm Pivot Pins with Double BushingsAir Cushioned Suspension with

Shock Absorbers5-Bolt Wheel HubsIndependent Wing LiftFull Profile Material

Distribution Deflectors



SUGGESTEDLIST PRICE

USD ($)



2265P CX20 Flex-Wing Rotary Cutter - 1000 RPMBar Type Bladeholders - Dual Suction BladesSerial Number P0CX20F005000 and above.

30,567.00



WHEELS AND TIRES1220 26" x 9" x 14.5" 24 Ply "Fat Boy" Severe Duty Ag Tires In Base Price



CX20 Flex-Wing Rotary Cutter - 1000 RPMBar Type Bladeholders - Dual Suction Blades




SUGGESTEDLIST PRICE

USD ($)

FRONT SAFETY SHIELDS ...Continued...1620 Front Safety Shield - Second Row Chain 356.00






Miscellaneous:9011 Shredding Attachment 1,097.00


701.00


264.00



Wheels and Tires:9025 Dual Wing Wheel Spindles, Hubs and 26" x 9" x 14.5" 24 PR "Fat Boy"

Severe Duty Ag Tires889.00






Miscellaneous:W50393 CX20 Center Section Wheel Spindle for 38 In. Rows




Continued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BW14560 French Operator's Manual and Decal Kit No Charge


264.00


701.00

BWA1489 Shredding Attachment 1,097.00






See Parts

Wheels and Tires:AW34779 26" x 9" x 14.5" 24 PR "Fat Boy" Severe Duty

Ag Tire and Wheel226.00



889.00

AW33092 Tire and tube kit for 26" x 9" x 14.5" 'Fat Boy' Severe Duty Ag Tire See Parts



Continued




Continued




SUGGESTEDLIST PRICE

USD ($)


Miscellaneous:AW30473 Axle

For MX7.120.00

AW32489 Bag of HardwareFor HX20 Code 9011.

30.00

TY25778 Implement JackFor CX15.

84.00

BW15588 Jack Mounting KitFor CX15.

180.00

BW10809 SMV Emblem 15.00

BW15812 Stalk Shredding AttachmentsFor HX20 Code 9011.

171.00

BW14053 Support Assembly 34.00

Safety Shields:BW15421 Front Safety Shield - Chain

For HX15 Rotary Cutters.541.00

BW15422 Front Safety Shield - ChainFor HX20 Rotary Cutters.

541.00

BW15441 Rear Safety Shield - ChainFor HX20 Rotary Cutters.

811.00

Wheels and Tires:AW30715 4 X 8 Laminated Tire

For MX7.205.00


Attachments for Field Conversion - Rotary Cutters



Attachments for Field Conversion - Rotary CuttersContinued



AGRICULTURAL PRODUCTSJOHN DEERE SCRAPERS

Attachments for Non-Current Scraper ProductsContinued


06 May 2011 US & Canada9-Scrapers-01000- 2

Cutting Height 1/2 to 5 InchCutting Width 78 InchesThree Bank Rotor 17-1/4 Inch Diameter36 Heat Treated KnivesBuilt-In Tractor HookupPTO ShieldsPTO-540 RPM65 Continuous, 90 Intermittent

HP Rated Gearbox

Heavy Duty Gauge Roller with Anti-FrictionSelf-Aligning Bearings

For Tractors Equipped with Category 1 3-Point Hitch


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Laredo, Texas or Moline, Illinois

0488P 25A Flail Mower with Heavy Duty Roller and 9 In. Offset 4,641.00

ATTACHMENTS - ORDER AS DESIREDAttachments ordered for field conversion will be shipped EX-WORKS Moline, Illinois.

Miscellaneous:9010 Rubber Deflector Shield for Rear Mounting 174.00

9020 Hitch Adapter for Category 2 Hitches 54.00

ATTACHMENTS FOR FIELD CONVERSIONAttachments ordered for field conversion will be shipped EX-WORKS Moline, Illinois.

Miscellaneous:BP16369 Rubber Deflector Shield for Rear Mounting 174.00

AGRICULTURAL PRODUCTSJOHN DEERE FLAIL MOWERS

25A Flail Mower with Heavy Duty Roller and 9 In. OffsetEquipment for Base Machine

06 May 2011 US & Canada9-Flail Mowers-00100- 1


25A Flail Mower with Heavy Duty Roller and 9 In. OffsetContinued



Cutting Height: 1/2 to 5 In.Cutting Width: 58.5 In.Heat Treated Side-Slicer Knives: 54Built-In Tractor Hook-Up: Cat. I/IIPTO ShieldsPTO - 540 RPMRotor Bearings 1-3/8 In. in Cast MountingsSkid ShoesReplaceable Skid Plates3-Bank Rotor 17 1/4 In. Diameter at

Knife Tips

Bearing Shield Rings InsideAnti-Wrap System65 Continuous, 90 Intermittent HP

Rated GearboxBearing Protection Guards Outside

For Tractors Equipped with Cat. I/II Hitch and 540 RPM PTO.


SUGGESTEDLIST PRICE

USD ($)



0484P 360 Heavy Duty Flail Mower 4,731.00

KNIVES1000 Heat Treated Side-Slicer Knives In Base Price

1010 Smooth-Cut Knives -118.00



9020 French Operator's Manuals and Labels No Charge


Miscellaneous:BP18373 French Operator's Manuals and Labels No Charge

BP16371 Rubber Deflector Shield for Rear Mounting 105.00

E31900 Smooth-Cut Knives See Parts


360 Heavy Duty Flail MowerEquipment for Base Machine



360 Heavy Duty Flail MowerContinued




Knife Tips





SUGGESTEDLIST PRICE

USD ($)



0485P 370 Heavy Duty Flail Mower 5,194.00











370 Heavy Duty Flail MowerEquipment for Base Machine



370 Heavy Duty Flail MowerContinued




Knife Tips





SUGGESTEDLIST PRICE

USD ($)



0486P 390 Heavy Duty Flail Mower - Center Pull 5,869.00











390 Heavy Duty Flail Mower - Center PullEquipment for Base Machine



390 Heavy Duty Flail Mower - Center PullContinued




Knife Tips





SUGGESTEDLIST PRICE

USD ($)



0487P 390 Heavy Duty Flail Mower - 12 In. Offset 5,869.00











390 Heavy Duty Flail Mower - 12 In. OffsetEquipment for Base Machine



390 Heavy Duty Flail Mower - 12 In. OffsetContinued




Knife Tips





SUGGESTEDLIST PRICE

USD ($)



0494P 390 Heavy Duty Flail Mower - 26 In. Offset 5,869.00











390 Heavy Duty Flail Mower - 26 In. OffsetEquipment for Base Machine



390 Heavy Duty Flail Mower - 26 In. OffsetContinued




SUGGESTEDLIST PRICE

USD ($)


Drive Shafts:AP40463 Driveline with Overrunning Clutch, 1-3/4 In. Drive 977.00

AP35698 Driveline with Overrunning Clutch, 1-3/8 In. Drive 842.00

Frame and Chassis:BP18051 Deflectors - Rubber 729.00

BP17018 Deflectors - Steel 512.00

BP17320 Gauge Wheel Support 330.00

AP40006 Lateral Skid Plate 220.00

BP16573 Weed Separator (Center Divider) 89.00

Wheel Equipment:BP18208 Wheel and Tire (7.60-15 6PR) 198.00

AGRICULTURAL PRODUCTSJOHN DEERE FLAIL SHREDDERS

520 Integral Flail ShredderContinued

06 May 2011 US & Canada9-Flail Shredders-00400- 2

8.5 Ft. (2.6 m) Digging DepthQuik-Tatch MountingTwo Double Acting Swing Cylinders180 Degree SwingNarrow Control ConsoleTwo Lever ControlSix Spool Control ValveHydraulics12 In. BucketOperator's Seat withTransport LocksHydraulic Stabilizers with

Flip-Over PadsRockshaft Assist MountingBrackets, Hardware and

Adapter Frame Plate for5103-5403 Series Tractors


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Davenport, Iowa

3660M 48 Backhoe(For 5103-5403 and 5E Series Tractors)Tractor's Must be Equipped with a Front Loader.

9,820.00

MOUNTINGS AND HYDRAULICS FOR TRACTOR1004 Subframe Mounting Brackets, Hydraulics and Hardware For 5005 Series Tractors In Base Price

1007 Subframe Mounting Brackets, Hydraulics and Hardware For 5E Series Tractors and5103-5403 Series TractorsCompatible with serial numbers after PY5103UO13641, PY5203U005570, PY5303U007753,and PY5403U000735.

488.00

1005 Less Mounting Brackets and Hardware -839.00

ADAPTER SUBFRAME FOR BACKHOE2002 Less Adapter Frame Weldment Plate -935.00

2004 Subframe AdapterFor 5103-5403 and 5E Series Tractors

In Base Price

BUCKETS3000 12-Inch Bucket (1.53 Cu. Ft) In Base Price

3001 18-Inch Bucket (2.47 Cu. Ft) 71.00

3002 24-Inch Bucket (3.48 Cu. Ft) 148.00

3003 36-Inch Heavy Duty Bucket (5.50 Cu. Ft) 281.00


AGRICULTURAL PRODUCTSJOHN DEERE BACKHOES

48 Backhoe(For 5103-5403 and 5E Series Tractors)


06 May 2011 US & Canada9-Backhoes-00100- 1


SUGGESTEDLIST PRICE

USD ($)


Miscellaneous:9000 Rubber Street Pad Kit 120.00

French Canadian Kit:9220 French Canadian Operator's Manual and Decal Kit No Charge


Adapter Frame for Backhoe:BM19566 Adapter Frame Weldment Plate

(4300-4400, 4310-4410)738.00

LVB25178 Subframe Adapter KitUsed on 5105-5205, 5103-5403 and 5E SeriesUsed on 5105-5205, 5103-5403 and 5E Series Tractors.

921.00

LVB25964 Subframe Mounting Brackets, Hydraulics and Hardware KitUsed on 5103, 5403 and 5E Series Tractors.

1,308.00

Buckets:BM19568 12 In. Standard Bucket (1.53 Cu. Ft.) 620.00

LVB25173 14 In. Heavy Duty Bucket (1.74 Cu. Ft.) 624.00


BM19569 18 In. Standard Bucket (2.47 Cu. Ft.) 699.00






Hydraulics:LVB25098 Power Beyond Kit

Includes rear mounted hydraulic couplers and hose for use with backhoe on 4510-4710tractors.

241.00

Miscellaneous:BM19556 Rubber Street Pad Kit 118.00

LVB25239 Stabilizer Cylinder Protection Kit 156.00



Continued




Continued




Continued



9.7 Ft. (2.95 m) Digging DepthQuik-Tatch MountingTwo Dual Acting Swing Cylinders180 Degree SwingNarrow Control ConsoleTwo Lever ControlSix Spool Control Valve14 In. BucketTransport LocksOperator SeatHydraulic Stabilizers with

Combination Grousers and

Street (Smooth) PadsMounting, Hydraulics, Subframe

for 5200-5500, 5210-5510,5220-5520, 5603, 5225-5625, and 5E Limited SeriesTractors


SUGGESTEDLIST PRICE

USD ($)



114DLV 49 Backhoe(For 5200-5500, 5210-5510, 5220-5520, 5603, 5225-5625, and 5E Limited Series Tractors)

12,927.00

MOUNTINGS AND HYDRAULICS FOR TRACTOR1000 Mounting Brackets, Hydraulics, and Hardware for ALL 5000 and 5010

Series Tractors AND 5020 Series Models with WELDED Drawbar Support ONLYMust also order Power Beyond Coupler Kit.Not applicable to 5020 Series serial number ranges listed in the note under option code 1001.

Same Price

1001 Mounting Brackets, Hydraulics, and Hardware for 5020 Series Tractorswith CAST Drawbar Support ONLYMust also order Power Beyond Coupler Kit.

Option Code 1001 is applicable to 5020 Series Tractors within the following serial rangesONLY: (Notice that several models include split ranges).

LV5220C420073 and Above (CS Transmission)LV5220S422523 - 422572; 422658 and Above (SS Transmission)LV5220T425064 and Above (SS Transmission with 540/540E PTO)LV5220P426200 - 426210; 426243 and Above (PR Transmission)LV5220K429016 and Above (PR Transmission with 540/540E PTO)

LV5320C Not Applicable (CS Transmission)LV5320S432850 - 432916; 433054 and Above (SS Transmission)LV5320T435136 and Above (SS Transmission with 540/540E PTO)LV5320P436490 - 436531; 436622 and Above (PR Transmission)LV5320K439134 - 439161; 439182 and Above (PR Transmission with 540/540E PTO)

LV5420C440065 and Above (CS Transmission)LV5420S443443 - 443492; 443878 and Above (SS Transmission)LV5420T445223 - 445235; 445266 and Above (SS Transmission with 540/540E PTO)LV5420P446897 - 446955; 447113 and Above (PR Transmission)LV5420K449166 and Above (PR Transmission with 540/540E PTO)

LV5520C450074 and Above (CS Transmission)LV5520S452968 - 453050; 453223 and Above (SS Transmission)LV5520T455152 - 455160; 455181 and Above (SS Transmission with 540/540E PTO)LV5520P456866 - 456915; 457109 and Above (PR Transmission)

Same Price


49 Backhoe(For 5200-5500, 5210-5510, 5220-5520, 5603, 5225-5625, and 5E Limited Series Tractors)




SUGGESTEDLIST PRICE

USD ($)

MOUNTINGS AND HYDRAULICS FOR TRACTOR ...Continued...LV5520K459197 - 459211; 459226 and Above (PR Transmission with 540/540E PTO)

1002 Mounting Brackets, Hydraulics, and Hardware for 5603, 5025 Series, and 5E Limited SeriesTractorsMust also order Power Beyond Coupler Kit.Tractor MUST be equipped with a rear Hydraulic Control Valve (single, dual or triple deluxe)for proper backhoe operation.

In Base Price

1010 Less Mountings, Hydraulics and Hardware -622.00

ADAPTER SUBFRAME FOR BACKHOE2000 Subframe Adapter for 5000, 5010, 5020, 5603, 5025 Series, and 5E Limited Series Tractors In Base Price

2010 Less Adapter Frame Weldment Plate -1,096.00

BUCKETS3000 14 In. Heavy Duty Bucket (1.74 Cu. Ft) In Base Price

3001 18 In. Heavy Duty Bucket (2.68 Cu. Ft) 63.00







French Canadian Kit:9220 French Canadian Operator's Manual and Decal Kit No Charge


Buckets:LVB25173 14 In. Heavy Duty Bucket (1.74 Cu. Ft.) 624.00







Continued



SUGGESTEDLIST PRICE

USD ($)


Frame and Chassis:LVB25734 Mounting Kit - Mounting Brackets, Hydraulics, and Hardware for 5020 Series Tractors

with CAST Drawbar Support ONLYMust also order Power Beyond Coupler Kit.APPLICABLE to 5020 Series serial number ranges listed in the note under option code 1001ONLY.

613.00

LVB25757 Mounting Kit - Mounting Brackets, Hydraulics, and Hardware for 5025, 5603 and 5E LimitedSeries TractorsMust also order Power Beyond Coupler Kit.Tractor MUST be equipped with a rear Hydraulic Control Valve (single, dual or triple deluxe)for proper backhoe operation.

613.00

LVB25304 Mounting Kit - Mounting Brackets, Hydraulics, and Hardware for ALL 5000 and 5010Series Tractors AND 5020 Series Models with WELDED Drawbar Support ONLYMust also order Power Beyond Coupler Kit.Not applicable to 5020 Series serial number ranges listed in the note under option code 1001.

613.00

LVB25171 Subframe Assembly for 5000, 5010, 5020, 5025, 5603 and 5E Limited Series TractorsMounting Kit ordered separately.

1,080.00

Hydraulics:LVB25697 Power Beyond Coupler Kit

Tractor MUST be equipped with a rear Hydraulic Control Valve (single, dual or triple deluxe)for proper backhoe operation.

411.00

LVB25367 Power Beyond Coupler Kit - 5E Limited and 5603 Series TractorsAlso fits all 00 Series, 10 Series and staddle mount 20 Series.

370.00

LVB25185 Power Beyond Coupler Kit - IOOS & Cab 5020 Series Only 278.00

Miscellaneous:LVB25581 Operator's Manual and Decal Kit - French No Charge

BM19556 Rubber Street Pad Kit 118.00



Continued




Continued



9.7 Ft. (2.95 m) Digging DepthQuik-Tatch MountingTwo Dual Acting Swing Cylinders180 Degree SwingNarrow Control ConsoleTwo Lever ControlSix Spool Control Valve14 In. BucketTransport LocksOperator SeatHydraulic Stabilizers with

Combination Grousers andStreet (Smooth) Pads

Mounting, Hydraulics, Subframefor 5M


SUGGESTEDLIST PRICE

USD ($)



6140LV 595 Backhoe(For 5M Series Tractors)

13,315.00

MOUNTINGS AND HYDRAULICS FOR TRACTOR1000 Mounting Brackets, Subframe and Hardware for 5M Series Tractors

Must also order Power Beyond Coupler Kit.Tractor MUST be equipped with a rear Hydraulic Control Valve (single, dual or triple deluxe)for proper backhoe operation.

In Base Price

BUCKETS3000 14 In. Heavy Duty Bucket (1.74 Cu. Ft) In Base Price










595 Backhoe(For 5M Series Tractors)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)


Adapter Frame for Backhoe:LVB25974 Backhoe Mounting Kit

Contains BH subframe and Mounting Kit for 5M Tractors only.2,061.00

Buckets:LVB25173 14 In. Heavy Duty Bucket (1.74 Cu. Ft.) 624.00





Hydraulics:LVB24996 Power Beyond Coupler Kit for 5M Series Tractors

Not compatible with Code 5095 (Less Rear Control Valve).337.00

Miscellaneous:BM19556 Rubber Street Pad Kit 118.00


595 Backhoe(For 5M Series Tractors)

Continued


Date post:	26-Apr-2018
Category:	Documents
Upload:	doancong
View:	217 times
Download:	1 times

AGRICULTURAL PRODUCTS JOHN DEERE LOADERS 512 …€¦ · AGRICULTURAL PRODUCTS JOHN DEERE LOADERS...

Documents