AIPC_Help

AIPC Help module

ATRN@v

Table of Contents

1. Introduction Page 3

2. 1. AIPC OVERVIEW Page 3

2.1. Airworthiness Directory access Page 3

2.2. Customer Originated Change search function Page 4

2.3. Effectivity display Page 7

2.4. Effectivity Engine Serial Number Page 10

2.5. Extended Range Twin-engine Operations Page 11

2.6. Indenture Page 13

2.7. Interchangeability Page 14

2.8. Local Manufacturer Page 15

2.9. Non Procurable Page 16

2.10. Oversize / Undersize Page 17

2.11. Restricted Usage Page 17

2.12. Revision Indicator Page 18

2.13. Sel From Page 18

2.14. Spares Page 19

2.15. Symmetry information Page 21

3. 2. USER INTERFACE OVERVIEW Page 22

3.1. 2.1 Layout Page 22

4. 3. INFORMATION ACCESS Page 23

4.1. 3.1 Table Of Contents Page 23

4.2. 3.2 Attach Documents Anchors Page 23

5. 4. INFORMATION SEARCHING Page 24

5.1. 4.1 Browsing in or among the documents Page 245.1.1. The links Page 24

Introduction Page 24Link from a service bulletin number Page 24Link from a Part Number found in the nomenclature Page 25Link from the Part Number File Page 26Link from item to figure Page 27

5.2. 4.2 Information searching Page 275.2.1. Form-based search Page 27

AIPC - Search Vendor code Page 27AIPC - Item by access/panel Page 29AIPC - Search Figure by ATA Page 31AIPC - Search Item by FIN Page 32AIPC - Search Information related to a PN Page 34AIPC - Numerical index Page 36

AIPC Help module - ATRN@v Feb 8, 2012 - Page 2 / 38

© 2007 AIRBUS HDK V2.2

1. Introduction :This module is a dedicated help module for AIPC searches functions and navigation features.

2. 1. AIPC OVERVIEW2.1. Airworthiness Directory accessTo find Airworthiness Directory (AD), search can only be performed using full text search, and entering complete reference of AD.

form for AD searchExtract of AIPC Figure showing highlighted result of previous search.



result of AD search by reference

2.2. Customer Originated Change search functionIn the form screen, select AIPC in 'document' field, select '*' in 'Customer Originated Change' field, like below



form for COC searchThe result should be like below:



result window for COC search functionShould you know precise COC identifier, select this one in the 'Customer Originated Change' field. By clicking on a line into the resultwindow, you can directly access to the right AIPC figure, centered on the selected CSN.



Final result after COC search

2.3. Effectivity displayIf you access to figure from selection by 6 ATA Digits in the T.O.C, identical effectivity statement is not repeated for all AIPC figures.



Within an AIPC figure, if there is only one effectivity statement on the top, this means that all ITEMS have the same effectivity.



In other case, the first top effectivity statement is the global effectivity of the AIPC Figure (in next example :101-105 131-138). If ITEMshave limited effectivity, specific effectivity is displayed before the concerned ITEM In next example :

• for ITEM 010D, effectivity is 101-105 131-134,• for ITEM 010E, effectivity is 101-105 131-138.

For the ITEM following 010E, there is no specific effectivity, this means that the upper Figure effectivity is applicable.



2.4. Effectivity Engine Serial NumberIn some cases, effectivity can not be shown in FSN concerning the Power Plant data. When the parts are changed by SB manufacturers,refer to the text on the top of the AIPC DPL.



ESN effectivity example

2.5. Extended Range Twin-engine OperationsETOPS data are available in the AIPC DPL below the designation in the "NOMENCLATURE" column of the concerned part and in theP/N window after clicking on the P/N in the DPL.



ETOPS information in AIPC DPL



ETOPS information in P/N window

2.6. IndentureThe indenture between parts is shown by dots in the DPL, before the designation in the "NOMENCLATURE" column



Indenture example in AIPC DPL

2.7. InterchangeabilityInterchangeability code is not available in the AIPC. The spare effectivity shows on which aircrafts the parts can be used as spares.



E.g.

• Part listed with the item 010D cannot be installed on A/C 135 to 138.• Part listed with the item 010E can be installed on A/C 135 to 138.

In conclusion, the new part (item 010E) can be used as spare on all A/C (101-105, 131-138).

2.8. Local ManufacturerIn the AIPC figure, if 'nomenclature' mentions '*LM*', you can access raw material by clicking on P/N.



extract of AIPC DPL

P/N window example

2.9. Non ProcurableIn AIPC figure, if P/N (in P/N column) is followed by '(NP)' mention, this means that this P/N is non procurable, and consequence is thatAirN@v is not able to show P/N Window (No P/N data, P/N in the AIPC figure is not clickable).



2.10. Oversize / Undersize

2.11. Restricted UsageThis data is shown like an effectivity in AirN@v, but this information is not interpreted in FSN. This data is related to an item. This meansthat the part with Restrictive Usage has to be used in the assembly shown with the item in RU.



example of Restricted Usage in AIPC DPL.

2.12. Revision IndicatorData concerned by the latest AIPC revision are "yellow" highlighted.

example of Revision marking throughout text

2.13. Sel From



2.14. SparesTo acces to spares information, click on a P/N in a AIPC figure to get the P/N window with qualified spare information if available (seeexample below/ item 010D on PN B539AAM0206).



extract of AIPC DPL

related P/N windowThis means that part B539AAM0206 on A/C 101-105, 131-134, can be replaced by itself or B539AAM0307 as spares.In addition, when the part B539AAM0307 as been installed as a spare on A/C 101, for new change, this part B539AAM0307 can bere-installed of replaced by B539AAM0206 on A/C 101.



Example of conditional spares

In some cases, replacement with condition is possible between two parts. The condition is only valid between parts linked by the relation"if PNA, see PNB" or "if PNY, refer to PNX".

2.15. Symmetry informationWhen all items are valid for LH and RH sides, LH/RH information is only shown on the first item of AIPC figure.

example of symetry for all itemsWhen parts are different in accordance with the side, (LH) or (RH) are shown in the DPL.



example of different symetry information for different items

3. 2. USER INTERFACE OVERVIEW3.1. 2.1 LayoutThe main window is composed of three frames. The left frame displays the TOC of the document. The middle frame displays the sheets.The right frame displays the content of the topic currently selected in the TOC or sometimes the target of a link or index. You may noticethat when you browse the document inside a location containing a figure then the first sheet of this figure is automatically displayed in theright frame.



Figure 27

4. 3. INFORMATION ACCESS4.1. 3.1 Table Of ContentsThe following figure shows the different items that may be displayed in the TOC. A tree has been used in order to focus on thedependence of the various items.

Manual Front MatterHighlights

CH - Title of the ChapterIntroductionSheet sheetnbr

Effectivity TableStation DiagramsZoningSheet sheetnbr

Filter Maintenance KitVendor ListService Bulletin ListCustomer Originated Change (COC)ListMajor Drawing Number IndexGlossarySheet sheetnbr

CH - Title of the ChapterCH-SE - Title of the SectionCH-SE-UN - Title of the UnitCH-SE-UN-FIG - Title of the Figure

4.2. 3.2 Attach Documents AnchorsIPC Anchors:

Chapter: ECH (E11)Customer Originated Change (COC) List: COCLISTEffectivity Cross (X) Reference: EFFXREFFigure: ECHSEUNFIGNBREQTMFR (E11210801) - EQTMFR has 5 digit



Filter Maintenance Kit List: FLTMKLISTGlossary: GLOSSARYIntroduction: INTROMajor Drawing Number Index: MAJDWGService bulletin list: SBLISTSection: ECHSE (E1121)Sheet: Eaircraftletter2CHSEUNFIGNBR[Z] - Z is optional variant (EG211212701A)Airplane Sectional/Station Diagrams: STADIAGUnit: ECHSEUN (E112107)Vendor Name And Address List: VENDLISTZone Diagrams And Data: ZONING

5. 4. INFORMATION SEARCHING5.1. 4.1 Browsing in or among the documents

5.1.1. The linksIntroductionThe text, which is the origin of a hypertext link, is written with a blue color and is underlined. To reach the target of the link, you canclick on any part of the blue and underlined text. There are several links which pop up an index result window. However, whenthere is a single result, this pop-up window is bypassed; only the target of this link, is displayed, this dialog box being useless.

Link from a service bulletin numberIn the service bulletin list of the IPC document, the service bulletin numbers found in the table bear a hypertext link. This linkallows you to view the items containing it. When you click on such a link, an index result window pops up. This window is split intotwo columns. The left one displays the service bulletin number with its revision and the right one displays the CSN of the itemlinked to it. After selecting a line in this pop-up window the document content frame displays the selected item (See Figures 51, 52and 53).

Figure 51



Figure 52

Figure 53

Link from a Part Number found in the nomenclatureIn the IPC nomenclature, the part numbers bear a hypertext link. The part numbers appear under the column named "PARTNUMBER" (See Figure 54). Clicking on such a link, the Part Number floating window displaying information found in the partnumber list (See Figure 55).



Figure 54

Figure 55

Link from the Part Number FileIn the part number file, you can find two types of links.- The first one is borne by the manufacturing codes, which can be optional. In this case, a window pops up and displays the entryin the vendor related list.- The second one is borne by the part numbers. If this part number is basic then a related list of CSN is displayed, allowing you todisplay the nomenclature to see how it is used. If the part number is not basic, by instance it replaces an other part number, thenthe right-bottom frame displays information about the entry in the part number list describing it.By clicking on this part number, you may obtain the list of CSN using it. Link from a Manufacturing Code to the corresponding entryin the vendor list The vendor codes found outside the vendor list bear a hypertext link. If you click on such a link then a windowcontaining the entry in the vendor list for this manufacturing code pops up (See Figure 56).



Figure 56

Link from item to figureIn the document, however you displayed an item, coming from the TOC, a link or an index search, you'll always have access to thefigure with the "FIGURE" icon in the tool bar. When you click on it, the figure which contains the item is displayed. Link from figuresto AMM document in the document, for each figure you can find in the nomenclature, if there is a corresponding section in AMM,then an icon in the task bar will appear. It will be labelled as "See AMM". If you click on it, then the document content framedisplays the related AMM tasks.

5.2. 4.2 Information searching5.2.1. Form-based search

AIPC - Search Vendor codeThe index form shown in Figure 105 allows specifying a vendor code. After submitting the form, the search will display a list ofvendor code in a pop-up window.The Figure 106 shows the index result window appearing after the sending of the previous form.Then, if you choose a line in the index result window, the document contents frame will display the vendor code folowing by itsname and address (Figure 107).Instructions for wildcard using:

The "*" (wildcard) as default key value means all possible values.When "*" is used with other characters, key values are filtered.Example: For Part number values: 7212VT1, 7212VT2, 45AB21, 1350V01, 1050V12, 7212VC4, 20VT10, 20VN10, 20VTC10"* " gives all values: 7212VT1, 7212VT2, 45AB21, 1350V01, 1050V12, 7212VC4, 20VT10, 20VN10, 20VTC10"7212*" filter expression gives following values: 7212VT1, 7212VT2, 7212VC4"*VT* " filter expression gives following values: 7212VT1, 7212VT2, 20VT10, 20VTC10The "?" represents a single random character in the key value, and corresponds to several possible values for the key."20V?10" gives following values: 20VN10, 20VT10You can use * and ? in the same expression"*VT?" gives following values: 7212VT1, 7212VT2



Figure 105

Figure 106



Figure 107

AIPC - Item by access/panelThe form shown in Figure 114 allows specifying an access/panel to search for ITEM related to.After submitting the form, the search will display the list of items which make an explicit reference to this access/panel in thecontents of the item. If there is only one found item, then the output window will be omitted and the document contents frame willdisplay the item. Otherwise, when there are at least two found items, an index result window will pop up. This window has twocolumns. The columns display the access/panel and the CSN corresponding to the item. The Figure 115 shows the index resultwindow appearing after the sending of the previous form.Then, if you choose a line in the index result window, the document contents frame will display the selected ITEM. The Figure 116shows the ADOC N@vigator window after the selection of the first line in the index result window.Instructions for wildcard using:




Figure 114

Figure 115



Figure 116

AIPC - Search Figure by ATAThe form shown in Figure 61 allows specifying a CSN. A CSN is made up of the fields chapter, section, unit and figure numberswhich appear in this order.After submitting the form, the search will display the list of items matching the information you have entered. If there is only onefound item, then the output window will be omitted and the document contents frame will display the item. Otherwise, when thereare at least two found items, an index result window will pop up. This window has three columns. The columns display the CSNfollowed by the part number and an item description. The Figure 62 shows the index result window appearing after the sending ofthe previous form.Then, if you choose an item in the index result window, the document contents frame will display the selected item. The Figure 63shows the ADOC N@vigator window after the selection of the first item in the index result window.

Figure 61



Figure 62

Figure 63

AIPC - Search Item by FINThe form shown in Figure 67 allows specifying a FIN to search for item related to. To enter the FIN, you can specify the full FIN orits different parts, which are the prefix, the circuit and the suffix.After submitting the form, the search will display the list of items which make an explicit reference to this FIN in the contents of theitem. If there is only one found item, then the output window will be omitted and the document contents frame will display the item.Otherwise, when there are at least two found items, an index result window will pop up. This window has four columns. Thecolumns display the FIN, the basic part number, the part number designation and the CSN corresponding to the item. The Figure68 shows the index result window appearing after the sending of the previous form.Then, if you choose a line in the index result window, the document contents frame will display the selected part number. TheFigure 69 shows the ADOC N@vigator window after the selection of the first line in the index result window.Instructions for wildcard using:




Figure 67

Figure 68



Figure 69

AIPC - Search Information related to a PNThis index is intended to be used to find a Part number in the document. The index form shown in Figure 70 allows specifying apart number you search for information.After submitting the form, the search will display a pop up window with all informations concerning the part number (Figure 71)



Figure 70

Figure 71



Figure 72

AIPC - Numerical indexThe index form shown in Figure 73 allows specifying a part number and its type.After submitting the form, the search will display a list of CSN in a pop-up window.In the window split in five columns, the first column displays the part number, the second one displays the type of this part number.The last three columns display the basic part number associated to, if it isn't already a basic part number, the CSN associated tothe basic part number, and Total QTY. The CSN refers to an item in the detailed part list. The Figures 74, 74A and 74B show theindex result window appearing after the sending of the previous form.Then, if you choose a line in the index result window, the document contents frame will display the item whose reference is shownin the CSN column of the pop-up window. The Figure 75 shows the ADOC N@vigator window after the selection of one line in theindex result window.Instructions for wildcard using:


Figure 73When the PN is 'BASIC' type, the corresponding CSN is listed, and no PN in 'Basic PN' column available.



Figure 74When the PN is 'QS' type, this PN is a Qualified Spare for the PN listed in 'Basic PN' column. The CSN identified is related to thePN shown in 'Basic PN' column.

Figure 74AWhen the PN is 'QS cond' type, this PN is a Qualified Spare with conditions for the PN listed in 'Basic PN' column. Due to the factthat the condition is between these two parts only, no direct relation is given with one CSN.



Figure 74B

Figure 75



Date post:	08-Apr-2016
Category:	Documents
Upload:	pham-viet-ha
View:	20 times
Download:	1 times