AIR COMFORT ROOFMASTER STEC - Øland Online · RMS ISO 14694. WIRING CHARTS Wiring charts are...

» TECHNICAL CATALOGUE

ROOF FANROOFMASTER STEC

NON-INSULATED VERSIONAIR MOVEMENT

ROOF FANS

AIR COMFORT

10076_Roofmaster STEC non-insulated_GB_2017-12-11.indd 1 2017-12-19 15:54

Fläkt Woods 10076 GB 2017.12.11 Specifications are subject to alteration without notice

Roofmaster - Technical Catalogue STEC Non-insulated 3

CONTENTS

GENERAL DESCRIPTION Application/specification ..........................................................................4

Features ...........................................................................................................4Material and design ....................................................................................4Motor and impeller ......................................................................................4Wiring charts .................................................................................................4Speed control .................................................................................................4EC controller ...................................................................................................4Easy installation and service ................................................................. 5Demand controlled ventilation ............................................................... 5

Accessories .................................................................................................. 5

PERFORMANCE DATA AND TABLES ............................................................ 6

FAN CHART EXPLANATION AND DEFINITIONS ..........................................7

TECHNICAL DATA INCL. DIMENSIONS STEC-190 ........................................................................................................ 8 STEC-225 ...................................................................................................... 10 STEC-310 .......................................................................................................12 STEC-355 .......................................................................................................14 STEC-400 ...................................................................................................... 16 STEC-450 .......................................................................................................18 STEC-500 ......................................................................................................20 STEC-630 ......................................................................................................22

WIRING DIAGRAMSWiring diagram A, STEC-190...630 ....................................................29

PRODUCT AND ACCESSORY CODES ...........................................................31



STEC Non-insulated Roofmaster - Technical Catalogue4

GENERAL DESCRIPTION

APPLICATION/SPECIFICATIONSTEC non-insulated roof fan is designed to be used for the extraction of exhaust air and other non-aggressive gases where low energy consumption, simple construction and demand con-trolled ventilation are required. It can be installed directly on the concrete or alternatively on a roof curb. The existing unit can be exchanged by using an installation frame, which is always includ-ed as standard in the delivery of STEC roof fan (sizes 225 - 630).

STEC is equipped with high efficiency EC-motors. The plastic impeller is optimized for high efficiency. The casing and motor-impeller-combination can be opened for easy service and maintenance. The fan is discharging vertically.

SPECIFICATION

Product type: STEC non-insulated roof fan

Impeller type: Plastic impeller with integrated EC motor

Insulation: Fan casing is non-insulated

Discharge: Vertical

Temperature: Ambient temperature up to + 60 °C (see motor table for each size)

Environment class: C4 (EN ISO 12944-2)

Motor: EC outer rotor motor

Electrical supply Sizes 190…400: 1~230 VAC 50 Hz Sizes 450…630: 3~400 VAC 50 Hz

Speed control: 0-10 V signal Using separate control accessories

Regulations complied: 1253/2014 for roof fan as NRVU/UVU 327/2011 for motorized impeller inside

All components are designed and manufactured in accordance with quality assurance system ISO 9001 and the environmental management system ISO 14001.

The roof fan is CE marked.

FEATURES• 8 sizes• Volume flow rate up to 4.5 m3/s (16 200 m3/h)• Max pressure rise up to 1 000 Pa

MATERIAL AND DESIGNThe casing is made of black pre-painted galvanized sheet metal or aluminum and zinc coated sheet metal. Surface treatment meets requirements for environmental class C4. The fan dis-charges upwards.

MOTOR AND IMPELLERThe fans use external rotor EC motors. The motor is in the airstream and is cooled by the exhaust air. The impeller is made of plastic and has backward curved blades. The IP class for the motor is IP 54, insulation class is B and all motors are equipped with thermal overload protector (TOP) that is internally connected.

All fans are balanced to meet the vibration level of 4.5 mm/s RMS ISO 14694.

WIRING CHARTSWiring charts are presented on pages 29.

SPEED CONTROLMotor speed can be controlled using analog 0 - 10 V signal




EASY INSTALLATION AND SERVICE Installation is presented in the installation manual and various control possibilities in a separate section of this catalogue.

DEMAND CONTROLLED VENTILATIONDemand controlled ventilation, DCV, is required by ErP Regula-tions. In practise this means that all roof fans shall be equipped with a speed controller.

Using DCV it is easy to adjust the correct fan speed and optimize the energy consumption.

Different sensors and controllers can be connected to the speed control system.

STEC can be installed on the concrete or on a roof curb using an installation frame.

The existing unit can be exchanged by using an installation frame, which is always included as standard in the delivery of STEC roof fan (except the smallest size 190). The fan is equipped as stand-ard with an opening mechanism that can be locked to open posi-tion. The impeller can be easily cleaned, if necessary.

REPLACING THE EXISTING ROOF FAN

STEC roof fans in sizes 225 - 630 are equipped with a mounting frame as standard. The mounting frame can be installed on the existing base made of concrete or on a roof curb.

STEC roof fan size 190 is delivered without the mounting frame. The fan can be installed on the concrete or on a roof curb.

As the fans have as standard the possibility to adjust the fan speed it is easy to replace the existing fan and adjust the air flow.

Sizes 225 - 630Size 190




PERFORMANCE DATA AND TABLES

NON-INSULATED ROOFMASTER STEC

MAX VOLUME FLOW RATE m3/s AS FUNCTION OF STATIC PRESSURE

MAX VOLUME FLOW RATE m3/h AS FUNCTION OF STATIC PRESSURE

SizePressure (Pa)

50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000STEC-190 0.163 0.154 0.145 0.135 0.124 0.111 0.095 0.074 0.039

STEC-225 0.232 0.215 0.193 0.166 0.125 0.052

STEC-310 0.528 0.489 0.441 0.381 0.303 0.191

STEC-355 0.785 0.727 0.662 0.586 0.492 0.363 0.108

STEC-400 1.173 1.123 1.068 1.006 0.933 0.846 0.736 0.583 0.333

STEC-450 1.752 1.703 1.651 1.594 1.532 1.463 1.386 1.3 1.201 1.085 0.941 0.742

STEC-500 2.854 2.803 2.75 2.695 2.636 2.575 2.511 2.442 2.369 2.291 2.206 2.113 2.011 1.895 1.763 1.607 1.415 1.172 0.855 0.475

STEC-630 4.658 4.543 4.424 4.301 4.173 4.041 3.903 3.758 3.605 3.444 3.271 3.086 2.883 2.657 2.399 2.086 1.656

Volume flow rate m3/s

SizePressure (Pa)

50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000STEC-190 587 554 522 486 446 400 342 266 140

STEC-225 835 774 695 598 450 187

STEC-310 1901 1760 1588 1372 1091 688

STEC-355 2826 2617 2383 2110 1771 1307 389

STEC-400 4223 4043 3845 3622 3359 3046 2650 2099 1199

STEC-450 6307 6131 5944 5738 5515 5267 4990 4680 4324 3906 3388 2671

STEC-500 10274 10091 9900 9702 9490 9270 9040 8791 8528 8248 7942 7607 7240 6822 6347 5785 5094 4219 3078 1710

STEC-630 16769 16355 15926 15484 15023 14548 14051 13529 12978 12398 11776 11110 10379 9565 8636 7510 5962

Volume flow rate m3/h

0 0,5 1 1,5 2 2,5 3 3,5 4,54 5

0 2000 4000 6000 8000 10000 12000 14000 16000 18000

400

600

800

1000

1200

200

0

m3/s

m3/h

Volume flow rate

Stat

ic P

ress

ure

(Pa)

STEC-450 STEC-500 STEC-630STEC-400STEC-355

STEC-310STEC-225

STEC-190




46%

45

40

45

40

0 500 1000 1500 2000

0

50

100

150

200

250

300

350

400

0 0,1 0,2 0,3 0,4 0,5 0,6

qv (m³/h)

Δps(P

a)

qv (m3/s)

1550 r/min

1400

1200

1000

65

60 dB(A)

55

30

FAN CHART EXPLANATION AND DEFINITIONS

SYMBOLS

SOUND DATAThe total A-weighted sound power level to surroundings, LwA, can be read in the fan chart. The correction coefficients Koct by octave bands can be read in the table below the fan chart. The sound power level by octave band to the duct or to the surroundings (without A-weight-ing) can be obtained by using the following formula:

Lwoct = LwA + Koct

SOUND PRESSURE LEVEL AND REMOTE ATTENUATIONDistance L (m) 1 3 5 10 15 20 25 30 40

Attenuation ∆L (dB) 7 17 22 28 31 34 36 37 40

The total sound pressure level to surroundings at different distances can be estimated using the following formula:

LpA = LwA – ∆L

FAN DATAThe fan data is presented using fan-motor-speed controller combination. For nominal flow rate, see each size.

The fan data is presented at density 1.2 kg/m2 and tested according to ISO 5801 and ISO 13347-2.

w

u

u

v

y

u qv Volume flow rate m3/s, m3/h

v ∆ps Fan static pressure Pa

w Fan max speed r/min

x h Overall static efficiency at max r/min %

y LwA A-weighted total sound levelto surroundings dB(A)

LWoct Sound power level by octave bands (without A-weighting) dB

Koct Correction when diving into different octave bands dB

∆L Remote attenuation (given values calculated for an ideal case in a halfspace) dB

z qnom Nominal flow rate (m³/s)

See Example on this page

THE SYMBOLS USED:

Fan code = fan type and size.

Min r/min = minimum fan speed where the sound power level correction Koct is still applicable.

Max r/min = maximum fan speed where the sound power level correction Koct is still applicable.

Correction = Sound power level correction factors Koct for the octave bands 63 to 8000 Hz.

x

z

EXAMPLESound pressure level LpA at 10 m distance:

Operation point 0,3 m3/s / 150 Pa

LwA = 61 dB(A) according to fan chart

LpA at 10 m: 61 dB(A) – 28 dB(A) = 33 dB(A)

The operation point and LwA are presented in the above fan chart and table.




FAN DATA

TECHNICAL DATA - STEC-190

For information how to calculate sound data, sound pressure level and remote attenuation, see page 7.

Fan code Sound path Min r/min Max r/minCorrection Koct (dB) in octave band mid-frequency (Hz)

63 125 250 500 1000 2000 4000 8000

STEC-190

Surroundings 0 767 5 –1 –6 –2 –3 –11 –19 –20Surroundings 767 1534 –6 –4 –6 –2 –6 –5 –15 –28Surroundings 1534 3043 –14 –11 –3 –3 –7 –5 –12 –16Surroundings 3043 3070 –16 –14 –5 –2 –7 –6 –11 –13

Inlet duct 0 767 5 –2 –5 –7 0 –11 –21 –23Inlet duct 767 1534 –9 –2 –5 –5 –10 –5 –7 –30Inlet duct 1534 3043 –11 –8 –1 –5 –10 –8 –11 –16Inlet duct 3043 3070 –13 –9 –5 0 –10 –9 –13 –14

SOUND DATA

70

65 dB(A)

60

3070 r/min

2500

2000

1500

37%

35

30

35

30

20

0 200 400 600

0

50

100

150

200

250

300

350

400

450

500

0 0,05 0,1 0,15 0,2

qv (m³/h)

Δps(P

a)

qv (m3/s)

Nominal flow rate according to Regulation 1253/2014 is 0.148 m³/s. The fan is classified as NRVU-UVU.





DIMENSIONS AND WEIGHT

358348

245

130

358348

245

130

Weight: 8 kgRoof free outlet area: 0.039 m2

No mounting frame is included for size 190.

Fan code Nom. power kW Supply voltage Max Speed

r/minNom.

current ATemperature

range °C

STEC-190 0.083 1~ 200-240 VAC 50/60 Hz 3070 0.75 –25 - +60

FAN AND MOTOR DATAPRODUCT CODERoof Fan STEC-190-11b-c-0-1

Size (a)

Motor type (bbb)1 = 1-phase motor

Insulation (bbb)1 = non-insulated version

Accessory package (bbb)0 = basic

Material (c)1 = painted galvanised sheet metal, black 2

Construction (d)0 = standard

Generation (e)

WIRING

A STEC-190-111-c-0-1 (fan packages 0 & 1)

See corresponding wiring diagram on pages 29





FAN DATA



63 125 250 500 1000 2000 4000 8000

STEC-225

Surroundings 0 1533 –9 –5 –6 –4 –5 –5 –17 –24Surroundings 1534 2050 –10 –9 –5 –4 –7 –4 –13 –15

Inlet duct 0 1533 –6 –2 –4 –10 –5 –9 –18 –24Inlet duct 1534 2050 –7 –8 –2 –10 –9 –10 –15 –19

7065 dB(A)60

55

2050 r/min

1800

1400

1000

42%

40

30

40

30

20

0 200 400 600 800

0

50

100

150

200

250

300

350

0 0,05 0,1 0,15 0,2 0,25

qv (m³/h)

Δps(P

a)

qv (m3/s)

SOUND DATA

Nominal flow rate according to Regulation 1253/2014 is 0.224 m3/s. The fan is classified as NRVU-UVU.






467469

234

Ø12

442

368

398 368


Mounting frame (included in delivery).


r/minNom.


range °C

STEC-225 0.082 1~ 200-240 VAC 50/60 Hz 2050 0.7 –25 - +60


Size (a)






Generation (e)

WIRINGA STEC-225-111-c-0-1 (fan packages 0 & 1)






SOUND DATA

FAN DATA


46%

45

40

45

40

0 500 1000 1500 2000

0

50

100

150

200

250

300

350

400

0 0,1 0,2 0,3 0,4 0,5 0,6

qv (m³/h)

Δps(P

a)

qv (m3/s)

1550 r/min

1400

1200

1000

65

60 dB(A)

55

30


63 125 250 500 1000 2000 4000 8000

STEC-310

Surroundings 0 894 1 –3 0 0 –5 –13 –20 –26Surroundings 894 1550 –8 –3 –2 –1 –4 –10 –18 –27

Inlet duct 0 894 –1 0 –2 –6 –11 –9 –23 –29Inlet duct 894 1550 –13 –1 –3 –7 –10 –13 –17 –26










r/minNom.


range °C

STEC-310 0.15 1~ 200-240 VAC 50/60 Hz 1550 1.2 –25 - +60


Size (a)




Material (c)1 = painted galvanised sheet metal, black


Generation (e)

WIRING


See corresponding wiring diagram on pages 29.

467469

314

Ø12

368

442

368398





FAN DATA

70

6560 dB(A)55

1410 r/min

1200

1000

800

48%

45

40

45

40

30

0 500 1000 1500 2000 2500 3000

0

50

100

150

200

250

300

350

400

0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9

qv (m³/h)

Δps(P

a)

qv (m3/s)


SOUND DATA



63 125 250 500 1000 2000 4000 8000

STEC-355

Surroundings 0 894 1 –3 0 0 –5 –13 –20 –26Surroundings 894 1410 –8 –3 –2 –1 –4 –10 –18 –27

Inlet duct 0 894 –1 0 –2 –6 –11 –9 –23 –29Inlet duct 894 1410 –13 –1 –3 –7 –10 –13 –17 –26






577579

349

Ø12

468

552

468508




r/minNom.


range °C

STEC-355 0.25 1~ 200-277 VAC 50/60 Hz 1410 1.1 –25 - +60


Size (a)






Generation (e)

WIRING







FAN DATA


70

65 dB(A)

60

1450 r/min

1200

1000

800

50%

48

40

48

40

30

0 1000 2000 3000 4000

0

100

200

300

400

500

600

0 0,2 0,4 0,6 0,8 1 1,2

qv (m³/h)

Δps(P

a)

qv (m3/s)


SOUND DATA


63 125 250 500 1000 2000 4000 8000

STEC-400

Surroundings 0 894 3 0 1 –2 –4 –12 –20 –29Surroundings 894 1450 –3 0 0 –3 –3 –11 –19 –27

Inlet duct 0 894 –1 4 1 –5 –8 –6 –12 –29Inlet duct 894 1450 –10 2 3 –4 –6 –11 –13 –14






647649

359

Ø12

498

622

498578




r/minNom.


range °C

STEC-400 0.5 1~ 200-277 VAC 50/60 Hz 1450 2.2 –25 - +50


Size (a)






Generation (e)







FAN DATA


85

80

75 dB(A)

70

1560 r/min

1400

1200

1000

55%

5040

50

40

30

0 1000 2000 3000 4000 5000 6000

0

200

300

400

500

600

700

0 0,2 0,4 0,6 0,8 1 1,2 1,4 1,6 1,8

qv (m³/h)

Δps(P

a)

qv (m3/s)


SOUND DATA


63 125 250 500 1000 2000 4000 8000

STEC-450

Surroundings 0 894 3 0 1 –2 –4 –12 –20 –29Surroundings 894 1560 –3 0 0 –3 –3 –11 –19 –27

Inlet duct 0 894 –1 4 1 –5 –8 –6 –12 –29Inlet duct 894 1560 –10 2 3 –4 –6 –11 –13 –14






737739

390

Ø12

603

603

668

712




r/minNom.


range °C

STEC-450 0.97 3~ 380...480VAC 50/60 Hz 1560 1.7 –25 - +60


Size (a)






Generation (e)

WIRING







FAN DATA


85

8075 dB(A)

70

1570 r/min

1400

1200

1000

58%

4050

55

55

50

40

0 2000 4000 6000 8000 10000

0

200

400

600

800

1000

1200

0 0,5 1 1,5 2 2,5 3

qv (m³/h)

Δps(P

a)

qv (m3/s)


SOUND DATA


63 125 250 500 1000 2000 4000 8000

STEC-500

Surroundings 0 767 –3 –1 –1 –3 –4 –9 –14 –19Surroundings 767 1570 –7 0 –2 –3 –4 –9 –12 –18

Inlet duct 0 767 0 0 –4 –10 –9 –12 –17 –22Inlet duct 767 1570 –8 0 –4 –9 –10 –11 –15 –19






917919

469

844

800

892

800

Ø12




r/minNom.


range °C

STEC-500 1.96 3~ 380...480VAC 50/60 Hz 1570 3.0 –25 - +40


Size (a)






Generation (e)

WIRING







FAN DATA

8580

75 dB(A)

1310 r/min

1200

1000

800

61%

60

50

60

50

40

0 5000 10000 15000

0

200

300

400

500

600

700

800

900

1000

0 1 2 3 4 5

qv (m³/h)

Δps(P

a)

qv (m3/s)



SOUND DATA


63 125 250 500 1000 2000 4000 8000

STEC-630

Surroundings 0 894 5 1 0 –2 –4 –10 –18 –22Surroundings 894 1310 –9 0 –4 –3 –4 –7 –14 –21

Inlet duct 0 894 16 0 –2 –7 –7 –12 –20 –20Inlet duct 894 1310 –7 5 –3 –9 –8 –10 –17 –21






1137 1139

528

Ø12

853

775

1112

1069 775 853




r/minNom.


range °C

STEC-630 2.75 3~ 380...480VAC 50/60 Hz 1310 4.3 –25 - +55


Size (a)






Generation (e)


See corresponding wiring diagram on pages 29 .




WIRING DIAGRAM A (FOR FAN PACKAGES 0 & 1)

STEC-190...310

STEC-355...400

STEC-450...630


FWG-

ROOF

MAS

TER

STEC

Tec

hnic

al c

atal

ogue

-GB-

2017

.12.11

-100

76GB

© C

opyr

ight

201

7 Fl

äkt W

oods

Gro

up

WWW.FLAKTWOODS.COM ROOFMASTER STEC | 10076GB | 20171211WE BRING BETTER AIR™ TO LIFE

» To learn more about our offering and get in contact with your nearest sales representative please visit www.flaktwoods.com

With over a century of innovation and expertise to share with our customers, Fläkt Woods is a global leader in Air Technology products and solutions. We specialize in the design and manufacturing of a wide range of products and solutions for Air Movement, Air Treatment, Air Distribution, Air Management and Air Diffusion with focus on two major benefits – Air Comfort and Fire Safety. With market presence in 65 countries we are in a unique position to be a local supplier and an international partner in our customer’s projects.

Our product brands such as RegAsorp, eQ®, eQ Prime®, JM Aerofoil®, Econet®, Veloduct®, Optivent®, Optimix®, Econovent® and Cleanvent® are well-known and trusted by customers all over the world to deliver high quality and energy efficient solutions.

Manufacturer:

Fläkt Woods OyKalevantie 39, FI-20520 Turku, FinlandTel. +358 20 4423000email [email protected] www.flaktwoods.com

STEC


Date post:	16-May-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

AIR COMFORT ROOFMASTER STEC - Øland Online · RMS ISO 14694. WIRING CHARTS Wiring charts are...

Documents