AIR CONDITIONING – GET COVEREDPRODUCT 31: AIR CONDITIONING PROTECTION COVERS DATA SHEET
MEMBER OFTHE FIRE
PROTECTIONASSOCIATION
For the very latest information, please visit our web site atwww.envirograf.com
Place the tent on itsback and thread thesupplied rodsthrough the centralretaining patch. Forlarger tents, threadthrough the centraland outer patches.
With the tent laid out, return it to its normalupright position and insert the rod ends intotheir pockets placed at each corner of thetent.
Place the tent over the aircon unit and feedthe cable through the ventilation hole,connecting it to the aircon unit according tothe manufacturer’s instructions. Go to eachcorner and pull the material away from thefitting over the T-bar and fix the material tothe T-bar with the supplied clips. Pinch eachclip with a pair of pliers to fix tightly.
Intumescent card is fixed to the top of thetent to provide entry points for support rodsor cables or pipes to pass through.Note: where the unit is already fitted, seamscan be made to allow the cover to be placedover the unit and the joints can be sealedwith the supplied adhesive.
VERY EASY TO FIT
TENTS ARE IDEAL PROTECTION FOR AIRCONDITIONING UNITS (SEE LEFT)
REGIONAL OFFICE
INSTALLATION OF INTUMESCENT FIRE TENT FOR USE OVER RECESSEDAIR CONDITIONING UNITS
With rising temperatures, air conditioning units arebecoming commonplace in many buildings. They do,however, provide a serious potential fire risk whenfitted into a suspended ceiling or fire-ratedplasterboard ceiling. Ducting outlets need to beprotected against fire and smoke as illustratedabove. In a fire, unprotected units could invalidateupper floor insurance claims, therefore it is crucial toprotect the air conditioning unit with a fireproofcover and to ensure you meet these regulations:–
ORDERING REFERENCESReference Length Width Height
AIR1 400mm 400mm 240mm
AIR2 400mm 400mm 280mm
AIR3 600mm 600mm 250mm
AIR4 850mm 850mm 240mm
AIR5 850mm 850mm 280mm
Includes adhesive and patches. All covers are rated one hour.
