Date post: | 16-Jan-2016 |
Category: |
Documents |
Upload: | peter-reynolds |
View: | 270 times |
Download: | 1 times |
AIR-COOLED SCREW CHILLER
FAS
Air-Cooled Screw Chiller – FAS-E (Low Noise)
Air-Cooled Screw Chiller – FAS-D
3 series of products FAS-D : Air-Cooled Cooling Only Chiller FAS-H : Air-Cooled Heat Pump Chiller FAS-E : Low noise series
Air-Cooled Screw Chiller - FAS
Capacity Range R22 Chiller: 70RT~350RT R134a Chiller: 100RT~320RT
Siemens Controller
Various protection devices such as high discharge temperature protection, compressor overload protection, high/low pressure protection, water flow error, anti freeze protection, oil level switch, and automatic defrost functions.
Various protection devices such as high discharge temperature protection, compressor overload protection, high/low pressure protection, water flow error, anti freeze protection, oil level switch, and automatic defrost functions.
76 dB(A)
Low Noise Design
Spring isolator
FAS Chiller
Base
Low Noise and Vibration
Big torque angle blades with low noise
Direct drive Fan Motor
Low Noise and vibration
Air-Cooled Screw Chiller - FAS
European Manufacturer &Technology
Each compressor provide 3 steps, 4 steps or continuous (33%-100% / 25%-100%) capacity control delivers the precise capacity to match the building cooling load.
Each compressor provide 3 steps, 4 steps or continuous (33%-100% / 25%-100%) capacity control delivers the precise capacity to match the building cooling load.
Inner groove tubing Hydrophilic aluminum fins Inverted “M” Coil
High Performance Heat Exchanger
High Efficiency Microchannel Condenser