+ All Categories
Home > Documents > Air Duster

Air Duster

Date post: 10-Nov-2014
Category:
Upload: joel-pravin
View: 95 times
Download: 0 times
Share this document with a friend
Description:
Air Duster
Popular Tags:
22
19 Cleaning Pads, Wipes and Sprays 605 Cleaning Solvents 600 Coatings 609 Contact Maintenance 606 Corrosion Control 618 Encapsulants 614 Filler 616 Floor Paint 618 Heat Protection 619 Heatsink Compounds 612 General Purpose Paint 616 Lacquer 619 Lubricants 607 Masking Agent 611 Moisture Repelling Lubricants 608 Potting and Encapsulating Materials 612 Potting Compound Selection Table 616 Road Paint 618 Service Aids 602 Silica Gel Desicant 605 Strippers and Thinners 618 Tamper-proof Coating 611 Thinners 611 Twin Pack Encapsulating Systems 614 Contents Electrochemicals & Service Aids & Paints
Transcript
Page 1: Air Duster

19

Cleaning Pads, Wipes and Sprays 605

Cleaning Solvents 600

Coatings 609

Contact Maintenance 606

Corrosion Control 618

Encapsulants 614

Filler 616

Floor Paint 618

Heat Protection 619

Heatsink Compounds 612

General Purpose Paint 616

Lacquer 619

Lubricants 607

Masking Agent 611

Moisture Repelling Lubricants 608

Potting and Encapsulating Materials 612

Potting Compound Selection Table 616

Road Paint 618

Service Aids 602

Silica Gel Desicant 605

Strippers and Thinners 618

Tamper-proof Coating 611

Thinners 611

Twin Pack Encapsulating Systems 614

Contents

Electrochemicals & Service Aids & Paints

Page 2: Air Duster

600

19

600

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Cleaning SolventsSolvent Cleaners

ULS – UltrasolveÌ Fast drying solvent blendÌ Removes flux, dirt and greaseÌ Suitable for PCB and electronic

assembly cleaningÌ Safe on most plasticsÌ 100% Ozone FriendlyECSP – Electronic Cleaning Solvent PlusÌ Super fast evaporating solventÌ Removes grease, dirt and most fluxesÌ Completely residue freeÌ 100% Ozone Friendly

FLU – FluxcleneÌ Excellent cleaner for flux, grease and

general grimeÌ Completely residue freeÌ Safe on most plastics, rubbers and

elastomersÌ 100% Ozone FriendlyIPA – IsopropanolÌ High purity, electronics grade IPAÌ Cleans PCBs and assemblies to leave a

residue free surfaceÌ 100% Ozone Friendly

106-970.IPA01L1 Litre Tin279-511.IPA400H400ml Aerosol130-620IPA200H200ml Aerosol298-189FLU01L1 Litre Tin725-663FLU400DB400ml Aerosol (Brush)298-177FLU400D400ml Aerosol298-165FLU200D200ml Aerosol521-735ECSP400D400ml Aerosol725-640ECSP200DB200ml Aerosol (Brush)521-723ECSP200D200ml Aerosol298-219.ULS01L1 Litre Tin725-651.ULS400DB400ml Aerosol (Brush)298-207.ULS400D400ml Aerosol298-335.ULS200D200ml Aerosol

144+36+12+1+Price Each

Order CodeMftrs.List No

Warning: All the above contain flammable contents, do not use on live circuits ornear any source of ignition, use in a well ventilated area.

CHM129

Speciality CleanersLRM – Label RemoverÌ Removes paper labels quickly and effi-

cientlyÌ Spray on, leave for five minutes and peel offÌ Very stubborn labels may require multiple

applicationsÌ Test on sensitive plasticsÌ 100% Ozone FriendlyPRS – PrintasolveÌ Removes ink (solvent or oil based) from most

surfacesÌ High effective and economic to useÌ Re-textures rubber print rollersÌ 100% Ozone Friendly

ULC – UltraclensÌ Slow drying solvent blendÌ 100% Ozone FriendlyÌ Recommended for cold cleaning

Ì Powerful penetrating actionÌ High flash point reducing risk of fireÌ Non-flammable in bulk (1 Litre)

Warning: All have flammable contents, do not use on live circuits or near any sourceof ignition, use in a well ventilated area.

279-547ULC01L1 Litre Tin451-307ULC400D400ml Aerosol451-290ULC200D200ml Aerosol521-711PRS400D400ml Aerosol

144+36+12+1+

725-638LRM12P12ml Pen60+20+10+1+

451-289LRM200D200ml Aerosol144+36+12+1+

Price EachOrder Code

Mftrs.List No.

CHM108

Solvent Cleaners

VID – Magnetic Head CleanerÌ Super fast evaporating blend of solventsÌ Removes dirt and oxides from tape headsÌ Reduces the incidents of read/write errorsÌ 100% Ozone FriendlySSC – Screen and Stencil CleanerÌ Fast evaporating solvent for the removal of excess solder paste from screen and

stencilsÌ Spray on to stencil or screen at an angle and allow excess paste to run offÌ Spray onto cloth (Safecloth, Safewipe etc.) and wipe screen or stencil carefully,

take care with fine pitch screens to clean all aperturesÌ Removes no-clean paste and water washable as well as RA and RMAWarning: The above products are highly flammable, do not use on live circuits or

near any source of ignition, use in a well ventilated area.

MDS – Metal Degreasing SolventÌ Powerful, chlorinated solvent, non-ozone depletingÌ Removes heavy grease and grimeÌ Fast evaporatingÌ Test on sensitive plasticsÌ Non flammableVIDP – Non-flammable Magnetic Head CleanerÌ Non-flammable, super fast evaporating solventÌ Suitable for removing oxide deposits from tape headsÌ May be used on live equipmentÌ Ideal for use in broadcasting environmentsSSS – Screen and Stencil SolventÌ Non-flammable (flash point >61°C) solvent to remove solder paste and adhesive

from screens and stencilsÌ Spray on to stencil or screen and wipe clean carefully with Safecloth or SafewipeÌ Removes no-clean paste and water washable as well as RA and RMA

634-890SSS500ML500ml Trigger Spray725-584VIDP200200ml Aerosol958-384SSC400400ml Aerosol891-307MDS01L1 Litre tin604-082VID100100ml Aerosol

144+36+12+1+Price Each

Order CodeMftrs.List No.

CHM27

Aqueous Cleansers

SWA400H – SafewashÌ Safewash J in convenient aerosol formatÌ Integral brush for ease of useÌ Removes most common fluxesÌ Removes dirt, grease and grimeÌ MUST be rinsed after useWarning: Flammable propellant, do not use on live circuits or near any source of

WAJ – Safewash JÌ Aqueous cleaner for PCBs, jigs and assembliesÌ Inhibited Safewash for use with sensitive metalsÌ Use with ultrasonic or pressure washersÌ Cleans to within MIL specificationsÌ MUST be rinsed after use

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Page 3: Air Duster

19

601

601

Electrochemicals, Service Aids & Paints

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

s

Internet www.farnell.com Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

891-265DEI05L5 Litre891-253DEI01L1 Litre

48+12+6+1+

725-687SWAS05L5 Litre299-250SWAJ05L5 Litre

144+12+6+1+

451-277.SRI400H400ml Aerosol451-265.SWA400H400ml Aerosol

144+36+12+1+Price Each

Order CodeMftrs.List No.

SRI400H – SaferinseÌ Pure blend of IPA and de-ionised water for rinsing after using SafewashÌ BiodegradableÌ Non-flammableÌ Gives final polish after tap water rinsingWarning: Do not use on live circuits

SWAS – Safewash SuperÌ Aqueous cleaner for PCBs and assembliesÌ Latest high efficiency Safewash with inhibition for sensitive metalsÌ Use with ultrasonic or pressure washersÌ Rinses quickly and from under low set componentsÌ Removes most ‘no-clean’ fluxesÌ Low odourÌ MUST be rinsed after useDEI – De-ionised WaterÌ Recommended as the final rinse after using Safewash and a tap water rinseÌ May be used for any application where hard water deposits cause a problem

CHM147

SMT Stencil & Screen Cleaners

128-867400ml AerosolScreen Cleaner128-855100 WipesStencil Wipes

72+36+12+1+Price Each

Order CodeSize

StencilWorks™ IPA Presaturated StencilWipes

General purpose presaturated wipe forcleaning solder paste off of SMT stencilsÌ Plastic safeÌ Regular cleaning strength sometimes

required to remove solderÌ High absorbency paste from SMT

stencil surfacesÌ Holds up to the most rigorous

scrubbingÌ Strong, will not tear, shred, unravel or

lint

StencilWorks™ IPA Stencil & Screen Cleaner

General purpose cleaner for penetrating and cleaning solder paste from SMT stencils &screensÌ Plastic safeÌ Regular cleaning strengthÌ Ideal for use with StencilWorks IPA Presaturated Wipes or with Chemtronics

Controlwipes Dry Wipes (C910)Ì Available in aerosol and liquid

Warning: Both the above products contain flammable contents, do not use near anysource of ignition, use in a well ventilated area

Mftrs. List No. SIP1GI=128-879, SIP16I=128-867, SIP100PI=128-855CHM332

Screen & Stencil Wipes

305-2000SSW10010+5+1+Order CodeMftrs. List No.

Price Per Pack100 Per Pack

Ì Effectively removes both solder pastes andadhesives

Ì 100 high wet strength fabric wipes, pre-saturated witha solvent based cleaner

Ì Re-sealable tub allows easy dispensing, whilst retain-ing the solvent saturation

Ì Fast drying and non staining with a low odourÌ Non flammableÌ Wearing of gloves is recommended when using the

wipes

CHM349

Cleaners/Degreasers

Electro-Wash® PX Cleaner DegreaserThe extra-strength universal cleaner degreaser safe for use on plasticsÌ FlammableÌ Fast drying leaving no residueÌ Safe on plasticsÌ Extra cleaning strengthÌ Available in BrushClean™ System for removing stubborn soilsÌ All-way spray valve allows use when invertedÌ Cleans hard-to-reach areasÌ Available in liquid formElectro-Wash® PR Cleaner DegreaserThe regular strength cleaner safe for use on plasticsÌ FlammableÌ Fast drying leaving no residueÌ Safe on plasticsÌ Regular hard-to-reach areasÌ All-way spray valve allows use when invertedElectro-Wash Two Step® PR Cleaner DegreaserThe regular strength cleaner safe for use on plasticsÌ Nonflammable Ì Use Electro-Wash Cleaner Degreaser to rinse and dry surface fast or rinse waterÌ Extra cleaning strengthÌ Cleans solder paste and inks from screen and stencilsÌ removes conformal coatingsÌ Test on plastics

Mftrs. List Nos. ES1010E=860-437, ES810BE=860-359, ES110E=313-3485, ES1603E=860-360,ES125AE=313-3497

Electro-Wash® Cleaner Degreasers are general purpose electronics and electrical clean-ing products. Some can be used in ultrasonic systems. They are engineered to clean awide variety of soils including oils, greases, oxides.

XXXtraStrengthXChem-Solv™

Cleaner Degreaser

XRegularStrengthXXElectro-Wash PR

Cleaner Degreaser

XXXXtraStrengthXXElectro-Wash® PX

Cleaning MethodsFeaturesProduct

Non-

Flam

mab

le

Fast

Dryin

g

Plas

tic S

afe

Clea

ning

Stre

ngth

Aero

sol

Brus

hclea

n™

Syste

m

Trigg

erSp

ray

Ultra

sonic

s

Cold

Imm

ersio

nCHM197

313-34975 LitreElectro-Wash Two Step860-360400ml AerosolElectro-Wash PR

313-34855 LitreElectro-Wash®PX860-347400ml AerosolElectro-Wash®PX

72+36+12+1+Price EachOrder

CodeSizeCleaner Degreaser

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Continued

The More You Order...The More You Save!

Purchases of certain products sold in packmultiples will be grouped together to give

you the total quantity price.

Page 4: Air Duster

602

19

602

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Cleaning Solvents — continued

Flux Removers

313-34735 LitreFlux-Off® Aqueous860-402200ml BrushClean™

Flux-Off®

Water Soluble

313-34615 LitreFlux-Off® Rosin860-414200ml BrushcleanFlux-Off® Rosin860-426400ml AerosolFlux-Off® Rosin957-033200ml BrushClean™Flux-Off® CZ957-021400ml AerosolFlux-Off® CZ

72+36+12+1+Price EachOrder

CodeSize

Flux-Off Flux Removers are specially for-mulated to remove all types of rosin (typesR, RA, RMA), rosin-based no clean, syn-thetic-based no clean (type SA) and watersoluble (type OA) flux. They are available inaerosol, BrushClean™ System, and liquidform for benchtop dispensers and ultra-sonic or dip tank applications. All productsare safe for use on plastics.

Flux-Off® CZ Flux removerThe first non-ozone depleting, nonflammable flux remover safe for use on plasticsÌ NonflammableÌ Removes flux from hard-to-reach areasÌ All-Way Spray Valve allow use when invertedÌ Fast Drying leaving no residueÌ Cleans rosin, water soluble and most no-clean fluxÌ Contains CIROZANE™ CFC Replacement Chemistry made with HFE drom 3MÌ Available in BrushClean™ System for removing stubborn stainsFlux-Off® RosinThe plastic safe flux remover for cleaning rosin and rosin-based no-based fluxÌ FlammableÌ Fast drying leaving no residueÌ All-Way Spray Valve allows use when invertedÌ Removes flux from hard-to-reach areasÌ Available in BrushClean™ System for removing stubborn residuesÌ Liquid version availableFlux-Off® Water SolubleThe plastic safe flux remover for removing water soluble flux from water sensitiveareasÌ Flammable Ì All-Way Spray Valve allows use when invertedÌ Removes flux from hard-to-reach areasÌ Moderate to fast drying leaving no residueÌ Available in BrushClean™ System for removing stubborn residuesFlux-Off® Aqueous Flux RemoverThe aqueous flux remover for use in ultrasonics and other aqueous cleaning systemsÌ Nonflammable Ì No spottingÌ Contains no silicates, abrasives, or causticsÌ Cleans all flux types including rosin, synthetic no clean, and water soluble fluxÌ Use Flux-Off flux remover to rinse and dry surface fast or rinse with waterMftrs. List No. ES7200E=957-021, ES7208BE=957-033, ES835BE=860-426, ES1035E=760-414,

ES135E=313-3461, ES83OBE=860-402, ES132E=313-3473

* Test on synthetic no clean flux

XXXXXXXFlux-Off®

Aqueous

X X X Flux-Off® WaterSoluble

XXXXXXFlux-Off® RosinXXXXXXX*XFlux-Off® CZ

Cleaning MethodsFeaturesPrimary Flux RemovedProduct

Rosli

n-Ba

sed

(R ,R

MA,

RA,

No

Clea

n)

No C

lean

(SA-

Synt

hetic

)

Wate

r Solu

ble

Non-

Flam

mab

le

Fast

Dryin

g

Plas

tic S

afe

Aero

sol

Brus

hClea

n™Sy

stem

Ultra

sonic

s

Cold

Imm

ersio

n

CHM198

Contact Cleaners

RegularStrengthXXPow-R-Wash™ PR

RegularStrengthXXXPow-R-Wash™ CZ

Contact Cleaner

Products

Features

Pow-R-Wash™ CZ Contact CleanerThe first non-ozone depleting, nonflammable cleaner safe for use on powered-up con-tacts and surrounding plasticsÌ Nonflammable Ì Fast DryingÌ Safe on plasticsÌ All-Way Spray Valve allows use when invertedÌ Contains CIROZANE™ CFC Replacement Chemistry made with HFE from 3MÌ Cleans hard-to-reach areasÌ Leaves no residueÌ Regular Cleaning StrengthPow-R-Wash™ PR Contact CleanerThe regular-strength contact cleaner for use on plasticsÌ Fast DryingÌ Safe on plasticsÌ Regular Cleaning StrengthÌ Leaves no residueÌ Cleans hard-to-reach areasÌ All-Way Spray Valve allows use when invertedWarning: Flammable contents, do not use on live equipment

860-384400mlES1605EPow-R-Wash™ PR957-057400mlES7300EPow-R-Wash™ CZ957-045200mlES7308EPow-R-Wash™ CZ

72+36+12+1+Price EachOrder

CodeSizeMftrs.List No.

Contact cleaners remove oils, greases and oxidesfrom contact surfaces. they restore the electricalcontinuity of contacts, switches, relays and con-nectors. Recommended for cleaning all types ofelectronic and electrical contact assembliesincluding:Ì Metal or Plastic embedded contactsÌ Fuse blocksÌ Potentionmeters, Relays or Circuit breakersÌ Electrical panels & Electronic controls

Non

-flam

mab

le

Fast

Dryin

g

Plas

tic S

afe

Clea

ning

Stre

ngth

CHM199Ì Please check with Sales Office for availability

Service AidsAirdusters and Freezers

MCF – Minimal Charging FreezerÌ Freezer suitable for use on all componentsÌ Will not induce static charge in sensitive components, e.g. memory chipsÌ Frost forming product allowing visual frost dissipation as a test method as well as

fault eradicationÌ Cools to at least -50°CÌ Non-flammableEAD – Air DusterÌ 100% Ozone FriendlyÌ Pure compressed airÌ Consistent high pressure with no hand-freezing effectÌ Non-flammableÌ Only invert EADI200DÌ Use in short bursts

FRE – FreezerÌ Freezer suitable for use on all non-static sensitive devicesÌ Allows frost dissipation and fault eradication at low temperature as test methodsÌ May be used to achieve shrink fit of metal componentsÌ May be used to remove adhesive, chewing gum etc.Ì May be used as a plumber’s freezer by temporarily freezing the waterÌ Cost effectiveÌ Cools to at least -50°CÌ Non-flammable

Note: If the non-invertible version is inverted when in use, a liquid will be expelled resulting in a freezing effect.

Page 5: Air Duster

19

603

603

Electrochemicals, Service Aids & Paints

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

s

Internet www.farnell.com Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

249-737.EAD400D400ml Aerosol130-631EAD200D200ml Aerosol

Non-Invertible

249-713.EADI200D200ml AerosolInvertible

891-230.FRE400400ml Aerosol891-228.FRE200200ml Aerosol891-216.MCF400400ml Aerosol891-204.MCF200200ml Aerosol

144+36+12+1+Price Each

Order CodeMftrs.List No.

CHM3

High Power Airdusters

302-6840EADP400470g Aerosol130-424GDP400400g Aerosol

100+50+10+1+Price Each

Order CodeMftrs.List No.

GDP400 AirdusterÌ High power, cost effective AirdusterÌ Powerful initial blast with minimal drop offÌ Use to remove dust from delicate and inacces-

sible areasÌ Non-flammable, pure compressed gasÌ Do not tilt more than 60° from the vertical and

use in short burstsEADP AirdusterÌ Ultra high power airdusterÌ High pressure blast for removing particularly

stubborn dustÌ Pure, inert compressed gasÌ Non-flammableÌ Do not tilt more than 60° from the vertical

CHM320

Airdusters

Ultrajet® Duster & Ultrajet® All-Way DusterÌ Non-flammableÌ Made with HFC-134aÌ Safe on plasticsÌ Leaves no contaminating residueÌ Biggest blast of any dusterÌ All Way Duster can be sprayed in any direction, even inverted, without the risk of

dispensing a liquid spray that can freeze or damage sensitive surfacesDusterÌ Economical, regular strength dusterÌ Safe on plasticsÌ non-flammableÌ Ozone safe, CFC/HCFC freeÌ Made with HFC-134a

R=Regular X=Extra Cleaning Strength

R DusterX Ultrajet® All-Way Duster

X Ultrajet® Duster

FeaturesDuster Product

153-540ES1617E400mlDuster128-818ES1620E200mlUltaset® All-Way860-438ES1520E400mlUltrajet®

72+36+12+1+Price Each

Order CodeMftrs.

List No.Size

Dusters remove dust, dirt and other drycontaminants from all kinds of surfaces.Ultrajet dusters can be used to economizeon solvent usage by removing layers of dryparticulate first so the solvent can workimmediately on the more difficult-to-remove soils.Dusters can be used to clean:Ì Printed circuit boardsÌ Photographic equipmentÌ Off equipmentÌ Electronic instrumentsÌ Contacts & connectors

CHM177

Powe

r

Inve

rtable

All

Way

Spr

ay

Antistat and Freez-It®

Freez-It®

Ì Quickly lowers temperature to -51°CÌ Non flammableÌ Ultra-Pure formulation leaves no residueÌ Nonabrasive, safe for most surfacesÌ Contains no ozone depleting components

860-451ES1551EFreez-It Antistat860-440ES1550EFreez-It

72+36+12+1+Order CodeList No.Price EachMftrs.

Freez-It® AntistatÌ Non-flammableÌ Leaves no residuesÌ Non abrasiveÌ Fast cooling to -50°CÌ Contains no ozone depleting compoundsÌ Anti-static option minimises generation of stat-

ic electricityÌ Suitable to use as heat sink protection during

soldering/desoldering and testing thermosen-sitive components

Made with HFC134a

400ml Aerosol

CHM187

Rework Solder Flux – SMFL

Warning: Flammable contents, do not use on live equipment or near any source ofignition, use in a well ventilated area.

.298-311SMFL200D12+5+1+

Price EachOrder CodeMftrs. List No.

200ml aerosol

Ì Quick drying aerosol flux for aiding rework of surface mount assembliesÌ Use prior to desoldering to aid removal of excess solder paste from boards and

resoldering new componentsÌ Provides excellent solderabilityÌ Non tacky, non corrosive residue can be removed using solvent cleaners

see page 600Ì Spray flux can also be used as an anti-tarnish, protective film on copper or tinned

tracks

CONTAINS: CO2

CHM121Ì Please check with Sales Office for availability

Gas Leak Detector SprayÌ Aqueous based fluidÌ Detects positive pressure gas

leaksÌ Foams at location of leak when sprayed on suspect

area

CONTAINS: CO2

603-934.3203096+36+12+1+

Price EachOrder CodeMftrs. List No.

300ml Aerosol

Operating temperature 0°C to +50°C

CHM110

Continued

Page 6: Air Duster

604

19

604

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Service Aids — continuedEngineers Pen

891-198ULS12PUltrasolve891-186SMF12PFlux Pen891-174CMO12PClear Mechanical Oil891-162EOP12PEdge Connector891-150CPL12PClear Protective Lacquer

20+10+5+1+CodeList No.Price EachOrder Mftrs.

Clear Protective Lacquer PenÌ Spot application of glossy lacquer

to labels and touching up PCB's afterrepair

Edge Connector PenÌ High performance lubricant in

flammable solventÌ Offers excellent electrical, mechanical and

high temperature propertiesClear Mechanical Oil PenÌ Contains Molylodenum Disulphide for

enhanced characterisicsFlux PenÌ Zero halide product Ì Does not leave corrosive residueÌ Excellent solderability and reliability Ì Contains MIL-14256E approved flux

Ultrasolve PenÌ Fast evaporating solvents leaving no residue Ì Removes flux, grease and general contamination from most plastics and

elastomersCHM168

Swabs

CHM139

860-773

860-785

860-797

860-803

806-815

Foamtips™ and Chamois Tips™

Foamtips™ Pro – Double-end provides two cleaning surfaces. Blue scrubbing side andwhite foam. Bendable 152mm polypropylene handle, 100 ppi foamhead.

Foamtips™ 130 – Elongated swab with rigid head to clean fine components.Polypropylene handle, 100 ppi foamhead.

Foamtips™ 140 – Miniature swab with rigid head for hard to reach areas.Polypropylene handle, 100 ppi foamhead.

Foamtips™ 150 – Full sized foam head over cotton bud for extra absorbency. Woodenhandle, 100 ppi foamhead.

Chamois Tips™ – Ultra-cleaned synthetic chamois material for cleaning and polishingvideo tape heads. ABS handle.

Microtips™

Ì Precision solvent and adhesive applicatorÌ Low particulate levelsÌ Compatible with most solvents

860-827CM502Microtips860-815CC50Chamois Tip860-803CF5050Foamtip 150860-797CF4050Foamtip 140860-785CF3050Foamtip 130860-773CFP50Foamtip Pro

24+12+1+TypePrice Per Pack

Order CodeMftrs.List No.

50 Per Pack

Chemswab™

860-839CS2524+12+1+Order CodeMftrs. List No.

Price Per Pack25 Per Pack

Ì Pre-saturated cotton bud with iso-propanol

Ì Easy to useÌ Evaporates quickly with no residue or

contamination

Ì Non-abrasiveÌ Ideal for keyboards, magnetic heads,

electronic components and in field ser-vice kits

CHM166

Dispenser Bottles

CHM170

891-289TSB000Trigger Spray891-277APB000Air Powered

48+12+6+1+Price EachOrder

CodeMftrs.

List No.

Air Powered

Ì Fill with bulk liquid, pump up by handand spray

Ì Achieve "aerosol" results without the use ofpropellants

Ì Not suitable for use with aggressive or chlori-nated solvents

Trigger Spray

Ì Simple to useÌ Graduation marks on bottleÌ Adjustable sprayÌ Suitable for applying water based and non-

aggressive solvents

Air Powered200ml (capacity)

Trigger Spray600ml

Syringe Ì White plastic syringeÌ Capable of holding up to 5ml of fluidÌ Integral moulded dispensing nozzle

with 1mm diameter holeÌ Snap-on cover prevents fluid leakage

when not in useÌ Ideally suited for field service as on oil

dispenser

146-312.

1000+500+100+10+1+Price Each

Order Code

CHM35

Re-Usable Syringes

130-52720ml Syringe130-51510ml Syringe130-5035ml Syringe130-4972ml Syringe

50+20+10+5+1+Order CodePrice Per PackPack Quantity=10

Ì A comprehensive range of emptysyringes

Ì Fill with grease, pastes, pre-mixed two-partmaterials etc to give accurate application

Ì 4 sizes to cover the majority of requirements

CHM330

Plastic Glove – PGS

CHM016

Ì Pre-powdered white vinyl gloveÌ Single sizeÌ Reversible, fits either handÌ Protects hands against cleaning and

degreasing solvents, ferric chloride andother chemicals

Ì Supplied in packs of 10

.317-615PGS100100+50+10+1+

Price Per PackOrder Code

Mftrs.List No.

Order Multiple=10

Page 7: Air Duster

19

605

605

Electrochemicals, Service Aids & Paints

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

s

Internet www.farnell.com Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

Silica Gel Desiccant

890-716.SGL100100g85 165890-704.SGL05050g85 130890-698.SGL01010g50 100

200+100+50+10+List No.WeightSize Price Each

Order CodeMftrs.

Order Multiple=10

Ì Non-indicating silica gel conforming to BS2540:1991Ì Inert to most chemicalsÌ Prevents corrosion by absorbing high levels of moistureÌ Avoid contact with bulk aqueous based fluidsÌ Suitable for use in any application where moisture attack is possibleÌ Use to protect hygroscopic powders, delicate electronic and communication equip-

ment, metal surfaces and general items where moisture induced mould growth orcorrosion is possible

CHM167

Cleaning Pads, Wipes and SpraysWipes

860-621C920Opticwipes™500 Per Pack

860-610C910Controlwipes™36+12+6+1+150 Per Pack

860-580CP410Optic Prep™860-591CP400Chempad™

36+12+4+1+

Price Per Box/Pack

Order CodeMftrs.List No.

50 Per Box

Chempad™ Pre-saturated WipeÌ General purpose, pre-saturated, lint-free cleaning padÌ Solvent evaporates leaving no residueÌ Safe for most plastics and rubberÌ Removes ink, soils and other residuesÌ Ideal for cleaning computers, office equipment and electronic componentsOptic Prep™

Ì Mild nonabrasive solventÌ Quickly removes dust, oils and contaminantsÌ Evaporates quickly, leaving no residueÌ Compatible with most plastics, glass and metalsControlwipes™ Dry WipeÌ Solvent resistant, high absorbency, tear resistant wipeÌ Polyester cellulose blendÌ Packed in Class 100 cleanroom environmentÌ Resistant to most solvents, alcohols and dilute acidsÌ Ideal for applications requiring excellent contamination controlOpticwipes™ Dry WipeÌ Soft laboratory-grade cellulose high absorbency paperÌ Non-contaminating and lint-freeÌ High wet strengthÌ Solvent resistantÌ For applications involving optical surfaces, lab equipment lenses and other

precision instrumentationÌ Ideal for applications requiring excellent contamination control

CHM192

Repair and Maintenance

725-675EWI100Wipes20+10+1+Order Code

Price Per BoxMftrs.List No.

100 Per Box

521-759BLV15BE15ml (Green)521-747BLR15BE15ml (Red)317-536ASA250ML250ml Bottle626-272AFC400D400ml Aerosol626-260AFC200D200ml Aerosol891-241HDL150150ml Aerosol

144+36+12+1+

Price Each

Order CodeMftrs.List No.

Warning: Flammable contents, use in a well ventillated area.

Warning: Flammable contents, do not use on live equipment or near any source ofignition, use in a well ventilated area.

HDL – HandclensÌ Ideal for use where water is not availableÌ Foaming hand cleanser that does not require rinsingÌ Apply a small amount to hand and rub hands together to cleanÌ Foam turns to easily removed crumbÌ Contains lanolin for moisturising and pleasantly perfumedAFC – Anti-Static Foaming CleanerÌ Non-flammableÌ Highly efficient hard surface cleanerÌ Safe on plasticsÌ 100% Ozone FriendlyÌ Shake well before useASA – Anti-Static SprayÌ Non-flammableÌ Cleans and prevents static build-upÌ Long lasting anti-static propertiesÌ Totally hazard freeÌ 100% Ozone FriendlyEWI – ElectrowipesÌ IPA impregnated wipes for all cleaning applicationsÌ Electronics grade IPA saturated on to lint-free clothÌ Conveniently sachet packed

BLR/BLV – BlocLube - tamper evident sealÌ One partÌ Air curingÌ Red or greenÌ Tack-free after 10 minutesÌ Adjustable for 24 hours – then becomes brittle

CHM148Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Continued

Carterclene

CHM331

130-473CTC400H400ml Aerosol144+72+36+12+1+

Price EachOrderCode

Mftrs.List No.

Ì Heavy duty anti-static foaming cleanerÌ Removes ground in dirt and grimeÌ Gives long lasting anti-static properties on glass,

plastic and other synthetic materialsÌ Minimise contact time on metals as CTC has a

relatively high pHÌ Shake well before use, apply and wipe with ECW025

or SWI100

Page 8: Air Duster

606

19

606

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Cleaning Pads, Wipes and Sprays — continuedEngineers’ Cleaning Wipes

634-931ECW02550+20+10+1+Mftrs. List No.

Price Per PackOrder Code

25 Per Pack

Ì Economical and manageablesize cloth which can be re-used

Ì Packed in a self-seal gripper bag to pro-tect against contamination

Ì Extremely absorbentÌ High qualitiy material with exceptional

tear and wet strengthÌ Lint free

CHM217

Contact MaintenanceContact Treatment Fluids

EOP – Edge Connector LubricantÌ Ultra high performance lubricant in a handy felt tip penÌ Use for edge connectors and all applications using noble metalsÌ Excellent electrical, high temperature and mechanical properties

EML – Contact Cleaner LubricantÌ Contact cleaner lubricant for switch and contact applicationsÌ Contains contact oil 2X in a high purity blend of solventsÌ Supplied in aerosol or penÌ Harmless to most plastics and rubbers

SFA – Contact Treatment Fluid No. 1Ì Contact Fluid No.1 in a pure solvent, packed in snorkel bottleÌ Use for cleaning and lubricating switches and contactsÌ Suitable for use in aggressive environmentsÌ May affect some plastics – test before useÌ Non-flammable

317-688SFA55B55ml Bottle726-813SOB200D200ml Aerosol279-481EML200F200ml Aerosol317-639EML05P5cc Pen

144+36+12+1+Price Each

Order CodeMftrs.List No.

Note: Use in a well ventilated area.

Warning: Do not use aerosol on live circuits or near any source of ignition, use in awell ventilated area.

CHM019

Non-flammable Contact Cleaner

130-436CCL200200ml Aerosol144+72+36+12+1+

Price EachOrderCode

Mftrs.List No.

Ì Non-flammable contact cleanerÌ Removes oxides and dust from all contact sur-

facesÌ Ultra fast evaporating, hence should be applied as

close to the item to be cleaned as possibleÌ Safe to use on live equipmentÌ Suitable for use where fire prevention is paramount

e.g. mines, submarines etc.

CHM319

Switch Cleaning Lubricant – Super Servisol 10 SERVISOLÌ Solution to remove contamination of

oils and grease and halt the corrosiveeffects of arching and heating

Ì Leaves residual, relatively conductiveoil film which reduces resistance

Ì Supplied with nozzle extension tubeenabling easier application in confinedspaces

CONTAINS: Butane

278-786

144+36+12+1+Price Each

Order Code

176ml Aerosol Note: May affect some plastics.

Warning: Flammable propellant, do not use on live circuits or near any source ofignition, use in a well ventilated area.

CHM17

Contact Treatment

CCS – Contact Cleaning StripsÌ 20 strip packÌ Mildly abrasive card strips impregnated with high performance contact oilÌ Use on points, contacts and relaysSGB – Contact Treatment Grease 2GXÌ High quality, non-melting contact grease 2GXÌ Reduces arcing and contact wear. Reduces millivolt dropÌ Specified world-wide for automotive and domestic switch applicationsÌ Available in aerosol (flammable) and syringe packaging

CG53A – Contact Treatment Grease 53AÌ Luer Lock syringe dispenserÌ New generation contact grease with excellent electrical propertiesÌ Highly plastics compatibleÌ Good high and low temperature performanceÌ Offers low and stable contact resistance

725-602CG53A35ml Syringe20+10+1+

317-664SGB35SL35ml Syringe317-652SGB20S20ml Syringe

100+30+10+1+

279-493SGB200D200ml Aerosol144+36+12+1+

Price Each

317-690CCS020Cleaning strips100+30+10+1+

Price Per PackMftrs.List No.

Pack of 20

Warning: 279-493 has flammable contents, do not use on live circuits or near anysource of ignition, use in a well ventilated area.

CHM20

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Major InternationalBrands

All the leading brand names from over1,000 major international manufacturers.

Page 9: Air Duster

19

607

607

Electrochemicals, Service Aids & Paints

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

s

Internet www.farnell.com Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

130-552200mlPhotoresist130-540250mlDeveloper130-539250gFerric Chloride

50+20+10+5+1+Price EachOrder

CodeSize

Ferric Chloride (FCC)Ì Sealed packet of ferric chloride hexahydrate for etching copper

clad boardsÌ Dissolve the packet (250g) in warm de-mineralised waterÌ Makes up to 500mlÌ Solution may be heated to lengthen lifePhotoresist Developer (PDN)Ì An alkaline, aqueous developer for positive photoresists particularly PRP200Ì Dilute 1 to 4 with de-mineralised water and use at above 20°CPhotoresist (PRP)Ì Fast drying positive photoresist aerosolÌ Use for one to one reproduction of circuits etc., on metal from transparent positive

mastersÌ Intended for PCB prototyping but may be used for areas of technical or artistic

reproductionCHM322

Conformal Coating Removal Pen

130-6679gCW350072+24+12+6+1+

Price EachOrderCodeSize

Mftrs.List No.

Conformal Coating Removal PenÌ Removes most types of coatings in secondsÌ Spot clean tight tolerance areas on circuit boardsÌ Marker dispenser provides controlled and exact appli-

cationÌ Evaporates quicklyÌ Provides low surface tension for superior wettingÌ Conveniently sized repair/prototype dispenserÌ Multilingual instructions and regulatory information

CHM326

Flux Removal/Dispensing

128-7279gCW9100No Clean FluxRemover Pen

130-7099gCW8200Rosin Flux130-6929gCW8100No clean Flux

Dispensing Pens

72+24+12+6+1+Price EachOrder

CodeSize/Qty

Mftrs.List No.Description

Remover PenCompletely removes flux in secondsSpot cleans tight tolerance areas on circuit boardsMarker dispenser provides controlled and exact applicationDries fast

Dispensing PensChisel tip marker provides exact delivery of flux to surfaceEasily removes with appropriate Flux Remover Pen or Flux-Off flux removerNo clean Flux Dispensing PenÌ Applies a patented non-corrosive, halide free, organic no-clean fluxÌ Flux meets Bellcore TR-NWT-000078 and IPC SF-818 for Surfface Insulation

ResistanceRosin Flux Dispensing PenÌ Applies a non-corrosive Type R fluxÌ Flux meets MIL-14256 E+F Type R and RMA

CHM329

LubricantsSpeciality Lubricants

HTG – High Temperature GreaseÌ Temperature range -20°C to +200°CÌ Does not harden at high temperatureÌ Low evaporation weight lossÌ Fortified with anti-wear and anti-oxidant additivesÌ Water resistantMPG – Multipurpose GreaseÌ Wide temperature rangeÌ Good lubricating and thermal propertiesÌ Safe on most thermoplasticsÌ Non-meltingSPG – Special Plastics GreaseÌ Superb plastic compatibilityÌ Excellent mechanical lubricantÌ Will not adversely affect electrical performanceÌ Use for plastic gears, cogs, slides etc.EPE – Permagard 40Ì De-watering fluidÌ Loosens seized metal partsÌ Protects against rust and corrosionÌ 100% Ozone Friendly

MPO – Multipurpose OilÌ Light, general purpose oil for all mechanical lubrication applicationsÌ Reduces wear and frictionÌ Prevents rust and corrosionÌ Excellent lubrication characteristicsÌ Tenacious film

Warning: Flammable contents, do not use on live equipment or near any source ofignition, use in a well ventilated area.

317-834MPO250ML250ml Tin100+20+5+1+

298-256EPE400H400ml Aerosol298-244EPE200H200ml Aerosol

144+36+12+1+

725-626SPG35SL35ml Syringe317-846MPG50T50ml Tube891-290HTG50T50ml Tube

50+20+10+1+Order CodePrice EachMftrs.

List No.

CHM30X

Silicone Oil – OSL400

302-6875OSL400400ml Aerosol12+6+1+

Price EachOrder Code

Mftrs.List No.

Warning: Product contains flammable solvent, do not use on live equipment ornear any source of ignition, use in a well ventilated area.

Ì High quality silicone sprayÌ Multi-purpose lubricant with good adhesionÌ Excellent water repellencyÌ Good electrical insulating compound and sealantÌ 100% Ozone Friendly

CHM348

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Continued

Page 10: Air Duster

608

19

608

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Lubricants — continuedClear Mechanical Oil

CMO – Clear Mechanical OilÌ Clear mechanical oil for many general lubricating applicationsÌ A blend of high purity mineral oils containing Molybdenum DisulphideÌ Penetrates well giving water resistance and a wide operating temperatureÌ FlammableULL – High Performance LubricantÌ Ultra high performance dry lubricantÌ Good thermal and electrical resistanceÌ Excellent low and high temperature propertiesÌ Use for gold connectors, as a silicone inhibit and on printers and copiers

725-547ULL200D200ml Aerosol298-232CMO200D200ml Aerosol

144+36+12+1+Price Each

Order CodeMftrs.List No.

Warning: Flammable contents, do not use on live circuits or near any source of ignition, use in well ventilated area.

CHM88XÌ Please check with Sales Office for availability

Multi-Purpose – ‘Superlube’®

Synthetic Lubricant with ‘Teflon’®

307-24722105012400g Tube537-159.210501185g Tube

Grease

537-160.2105001375ml Aerosol537-147.21050217ml dispenser

144+36+12+1+Price Each

Order CodeMftrs.

List No.Oil

Ì Synthetic formulation – provides pre-dictable viscosity and reliable filmstrength at high temperatures

Ì Contains anti oxidants and rustinhibitors to protect against moistureand corrosion

Ì Odourless, clean and non stainingÌ Excellent dielectric properties, prevent

trackingÌ Excellent thermal and oxidation stability

The oil is available in either a 7ml precision dispenser or 357ml Aerosol. Grease is sup-plied in 85g plastic tube.Operating temperature -23°C to +176°C (260°C short term)

-54°C to +176°C (Grease) (260°C short term)

‘Kilopoise’Ì Range of lubricants

with very high extremeviscosity

Ì Acts in manner which is opposite ofstandard lubricants

Ì Increases difficulty of movementbetween surfaces

Designed for assemblies where a fine adjustment or slow motion is produced by hand,where free motion is required to be dampened, and where sealing is required, but notfor moving machinery in the ordinary sense.

'G”Grades

Ì Soap thickenedÌ Operates at high operatingÌ temperaturesÌ Used in view of wider clearanceÌ involved

'S”Grade

Ì Available in heavy grade onlyÌ Colloidal silicia thickenedÌ Higher operating temperature than 'G'Ì grade Ì Retains consistency when worked

101-72050g Jar0868S101-67950g Tube0868G101-67750g Tube0868

Heavy Grade

101-67150g Tube0001G36+12+1+Light Grade

Price Each

Order Code

Grade Melting PointStandard Fluid at room temperature‘G’ 95°C‘S’ 205°C

CHM34

Conductive Greases

860-645CW7100BLK50ml860-633CW7200BLK50ml

24+12+6+1+Price Each

Order CodeMftrs. List

No.Size

343°C255°CDropping point<30.0Ω<0.01ΩcmElectrical conductivity-57°C to 252°C-57°C to 252°CTemperature rangeCarbonSilverFilterSilicne GreaseSilicone GreaseMaterial72007100

7200 Carbon conductive grease combines electrically conductive carbon graphite withadvance silicone lubricants. It features excellent high temperature properties making ituseful in applications where dripping or running at temperature may cause a problem7100 Silver conductive grease combines pure silver with advanced silicone lubricant,and gives both electrical and thermal conductivity. Ideal in low power electronic or highpower electrical applications.

CHM164X

Moisture Repelling LubricantsPenetrating – WD-40 WD-40

Ì General purpose light lubricant/cleanerÌ Repels moisture Ì Good penetrating propertiesÌ Silicone free making it suitable for use on electrical equipmentÌ Helps loosen corroded metal nuts, bolts, linkages, hinges etcÌ High surface attraction to metalÌ Capable of lifting and removing old grease and grimeÌ Leaves metal coated with a protective film to prevent rust and corrosionÌ May effect some plasticsÌ Aerosol supplied with extension tube to reach normally inaccessible areasÌ Supplied as 200ml and 400ml aerosols and 5 litre bulk pack with spray applicatorÌ 108-432 and 726-850 contain Co2

200ml+

400mlAerosol

Warning: Flammable contents and propellant do not use on live equipment or nearany source of ignition, use in a well ventilated area.

CHM90X

726-8625 Litre + spray108-432400ml726-850200ml

144+36+12+1+Order Code

Price Each

Ì Please check with Sales Office for availability

Page 11: Air Duster

19

609

609

Electrochemicals, Service Aids & Paints

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

s

Internet www.farnell.com Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

Penetrating OilÌ Penetrates to give quick and effective

release of corroded threaded fastenersor similar seized components

Ì Spray leaves protective film giving short term corrosionprotection

Ì Supplied with extension tube

CONTAINS: Molybdenium disulphide and CO2

Operating temperature -20°C to +70°C

Note: Use in a well ventilated area.

‡450-996.14025144+36+12+1+

Price EachOrder CodeMftrs. List No.

300ml Aerosol

CHM113X

NC123 Extra NATIONAL CHEMSEARCH

Note: Will not affect electrical characteristics, will not harm metals, most laquers and enamels, ceramics or plastics

Ì Displaces moistureÌ Inhibits corrosion and rustÌ Lubricates and cleansÌ Prevents electrical failure caused by

moistureÌ Ideal for use on electrical and electronic

equipment

CONTAINS: Butane and Propane

400mlAerosol

451-253

144+36+12+1+Price Each

Order Code

Warning: Flammable contents and propellant, do not use on live equipment or nearany source of ignition, use in a well ventilated area.

CHM37Ì Please check with Sales Office for availability

LubricantsDFL – Dry Film LubricantÌ High purity PTFE based lubri-

cantÌ Chemically inert film which will not

migrate or attract contaminationÌ Water repellent with a low coefficient of

frictionÌ Use where silicones or mineral oils are

unsuitableÌ May also be used as a mould release

for cold mouldsÌ 100% Ozone Friendly

SCO – Silicone Grease CompoundÌ High insulating silicone compound with good water resistanceÌ Chemically inert, non toxic and odourlessÌ Excellent resistance to trackingÌ Meets MIL-1-8660B and DEF STAN 59.10/2Ì 100% Ozone Friendly

Products contain: CO2

Warning: Both items contain flammable contents, do not use on live equipment ornear any source of ignition, use in a well ventilated area.

Operating temperatures -200°C to +200°CCHM38X

298-270SCO200D200ml Aerosol298-268.DFL200D200ml Aerosol

144+36+12+1+Price EachOrder

CodeMftrs.List No.

Ì Please check with Sales Office for availability

Silicone Compound – DC4Replaces MS4

Note: Not suitable for medical applications

Ì Smooth silicone grease like materialÌ Maintains relatively constant consistency over operating temperature rangeÌ Excellent dielectric propertiesÌ Highly water repellantÌ Used as filling or coating to exclude moisture or prevent electronic leakage under

damp conditions in electronic equipmentÌ Can be used to lubricate passage of wiringDielectric strength 16kV/mm Operating temperature -50°C to +200°C

537-019.

200+100+50+10+1+Price Each

Order Code

100g Tube

CHM40X

CoatingsCoatings and Varnishes

CPL – Clear Protective LacquerÌ 200ml aerosolÌ General purpose coatingÌ Solvent removableÌ High glossÌ Good humidity resistanceÌ Can be soldered through safelyÌ 100% Ozone FriendlySRC – Silicone Removable CoatingÌ Solvent removable, silicone conformal coatingÌ May be safely soldered throughÌ Good adhesionÌ Good humid ageing propertiesÌ 100% Ozone FriendlyÌ UV trace for easy inspectionTRV – Tropicalised VarnishÌ An air drying, acrylic based varnish incorporating a UV trace for inspection purpos-

esÌ Use for protecting PCBs and assembliesÌ Touch dry in approximately 10 minutesÌ Incorporates a fungicide to prevent attack in high humidity atmospheresÌ Wide operating temperatureÌ Excellent electrical propertiesMR8008 – Insulating VarnishÌ Solvent based, air drying polyurethane, one-part varnishÌ Dipping grade for the insulation and protection of PCBs, transformers and wound

componentsÌ Touch dry in approximately 60 minutesÌ Wide operating temperatureÌ Contains UV trace for inspection

958-372MR8008250ml Tin958-360TRV500ML500ml Tin891-319SRC400400ml Aerosol521-462CPL200H200ml Aerosol

72+36+12+1+Price Each

Order CodeMftrs.List No.

Warning: All the above have flammable contents, do not use on live equipment ornear any source of ignition, use in a well ventilated area.

Ì Please check with Sales Office for availability CHM041

Page 12: Air Duster

610

19

610

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Coatings — continued

Conformal Coatings

DCA/DCR – SCC3 Conformal CoatingTransparent (DCA) or Red (DCR)Ì UL approved coatingÌ Very high chemical and solvent resistanceÌ Not solvent removableÌ UV trace for inspection (DCA only)Ì Heat cure for maximum protectionÌ Can be safely soldered throughÌ Operating temperature range -70°C to +200°CÌ 100% Ozone Friendly

TFCF – Fluorocoat – Thin Film CoatingÌ Thin film coating offering excellent moisture resistanceÌ Suitable for use in telecommunications and passenger compartment applicationsÌ Applies a very thin film which breaks when connectors etc. are insertedÌ Does not require labour intensive masking of sockets and other componentsÌ Packed in handly 250ml pump spray for use in maintenance and repairÌ UV trace for easy inspection

HPA – High Performance Acrylic Conformal CoatingÌ Conforms to MIL-1-46058CÌ UV trace for inspectionÌ Solvent removableÌ Safely soldered throughÌ Operating temperature range -55°C to +130°CÌ 100% Ozone Friendly

Warning: Flammable contents and propellant, do not use on live equipment or nearany source of ignition, use in a well ventilated area.

Warning: Flammable contents and propellant, do not use on live equipment or nearany source of ignition, use in a well ventilated area.

891-320TFCF250250ml Pump spray72+36+12+1+

725-699HPA01L1 Litre tin298-281HPA200H200ml Aerosol298-300DCR200H200ml Aerosol725-705DCA01L1 Litre tin298-293DCA200H200ml Aerosol

144+36+12+1+Price Each

Order CodeMftrs.List No.

CHM174

Re-Work

130-461SRC15ML15ml Container130-450APL15ML15ml Container

302-6838APL400H400ml Aerosol144+72+36+12+1+

Price EachOrder Code

Mftrs.List No.

Acrylic Protective Lacquer (APL)Ì Conveniently packaged lacquer for

repair and reworkÌ Salt spray resistantÌ Good electrical propertiesÌ Clear glossy finishÌ Good adhesionÌ UV trace for easy inspectionÌ Available in either aerosol or container formSilicone Removable Coating (SRC)Ì Conveniently packaged lacquer for repair and

reworkÌ Solvent removable, silicone conformal coatingÌ UV trace for easy inspectionÌ May be safely soldered throughÌ Good adhesionÌ Good humid ageing properties

CHM324

Conformal Coatings

Warning: All have flammable contents, do not use on live circuits or near any sourceof ignition, and use in a well ventilated area.

304-43485Ltr ContainerCTUV1Konform® UV304-43361 Litre ContainerCTUV32Konform® UV305-86825Ltr ContainerCTAR1EKonform® AR304-4294400ml AerosolCTAR-12EKonform® AR305-86705Ltr ContainerCTSR1EKonform® SR304-4270400ml AerosolCTSR-12EKonform® SR

12+6+1+Price EachOrder

CodePack SizeMftrs.List No.Description

Ì Konform® conformal coatings are used in spray, dip tank and brush applicationsÌ Protect PCB Components and flex circuitry from damageÌ Most Konform® conformal coatings contain a UV indicator for improved QAÌ Dielectric strengths of 1100 volts/mil or moreÌ Tough, clear transparent coating will not fragment, chip or crackÌ No mixing requiredÌ All Konform® products are plastic safe and upper ozone safe CFC/HCFC FreeKonform® SRÌ Engineered for applications where flexibility and high temperature resistance are

requiredÌ Silicone coating stable from -64°C to +199°CÌ High dielectric strength of 1100 volts/milÌ Easily removed with Electro-Wash Two Step or Conformal coating remover pen Ì UL recognised, Mil-46058CKonform® ARÌ Designed to provide effective insulation against electrical shorts and harsh environ-

mentsÌ Acrylic coating stable from -59°C to +137°CÌ High dielectric strength of 1200 volts/milÌ Provides excellent acid resistance Ì UL recognised, Mil-46058CKonform® URÌ Ideal for applications that require good abrasion and solvent resistanceÌ Urethane coating stable from -45°C to +110°CÌ High dielectric strength of 1200 volts/mil Ì UL recognised, Mil-46058CKonform® UVÌ UV curable in 30 secondsÌ Conformal coating stable from -54°C to +163°CÌ Meets MIL-1-46058C

Product Selection GuideProduct Temperature Abrasion Organic Solvent Acid Flexi- Solder- Repair- Humidity

Resistance Resistant Resistant Resistant bility ability abilityKonform® SR ÃÃÃÃ ÃÃÃÃ ÃÃÃÃ ÃÃÃ Konform® AR ÃÃÃ Ã ÃÃÃ ÃÃÃÃ Konform® UR ÃÃ ÃÃ ÃÃ ÃÃ Konform® UV ÃÃ ÃÃ ÃÃ ÃÃ

CHM189

Silicone Conformal Coating

155-4571-2577 Low VOC0.5kg Bottle6+1+

Price EachOrder CodeMftrs. List No.

Ì One part coatingÌ Low viscosity dispersion in ozone-

safe, VOC exempt solventÌ Easy application, spray, brush, dip or flow coatingÌ Room temperature cureÌ Good adhesionÌ Stable and flexible from -50°C to +200°CÌ Clear, contains a dye which is fluorescent under UV

lightÌ Excellent dielectric propertiesÌ Meets MIL-I-46058CÌ Flammable liquid

CHM337

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Page 13: Air Duster

19

611

611

Electrochemicals, Service Aids & Paints

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

s

Internet www.farnell.com Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

Shielding

725-614SCP03B3g Bottle144+36+12+1+

521-450.NSC400H400ml Aerosol144+36+12+6+1+

Price EachOrder Code

Mftrs.List No.

Warning: Both of the above products contain flammable contents, do not use on liveequipment or near any source of ignition, use in a well ventilated area.

NSC – Nickel Screening CompoundÌ 100% Ozone FriendlyÌ Excellent surface resistivityÌ Excellent adhesionÌ Fast dryingÌ Excellent attenuation levelsSCP – Silver Conductive PaintÌ Highly conductive silver loaded resinÌ Fast dryingÌ Ideal for track repairÌ Ideal for pinpoint shielding

CHM44XÌ Please check with Sales Office for availability

Coatings

604-045.4.9gOvercoat Pen - Green604-033.4.9gOvercoat Pen - Clear130-6558.5gFlex Conductive Pen604-0218.5gConductive Pen - Micro 0.7604-010.8.5gConductive PEN - STAN 1.4

20+10+5+1+Price EachOrder

CodeSizeDescription

Conductive PenPen dispenser for drawing highly conductive silver traces,jumpers and shielding with precision and controlÌ Quickly creates conductive silver traces on most surfacesÌ Valved pen tip for easy applicationÌ Can be soldered at low temperaturesÌ Dries in minutes at room temperatureÌ Choice of Micro Tip for fine lines or Standard Tip for wider

linesFlex Conductive PensMicro-Tip pen for drawing conductive traces on flexible andITO surfacesÌ Quickly creates flexible conductive silver traces on Mylar®

and flex circuitryÌ Micro tip for precise applicationsÌ Dries in minutes at room temperatureÌ highly adherent polymer systemOvercoat PenPen dispenser for precise application of a tough protective acrylic conformal coatingÌ Protects conductive pen tracesÌ Repairs permanent solder maskÌ Protects against shorting, arcing, abrasion and moistureÌ Dries in minutes at room temperatureÌ Choice of clear or green coating

Warning: Both of the above contain flammable contents, do not use near any sourceof ignition, use in a well ventilated area.

CHM162Ì Please check with Sales Office for availability

Tamper-proof CoatingVarnistop Red 7400

307-2034

100+50+10+1+Price Each

Order Code

CHM344

Ì Solvent based dark red marking ink for use on elec-tronic equipment

Ì Excellent adhesion to metal and plastic fastenersÌ Dry to touch in 5 minutesÌ Used for tamper-proofing and warranty sealsÌ Ideal for securing trim pot settingsÌ Enables a visual inspection of adjustement

ThinnersConformal Coating Thinners

305-20115 litreUAT305-19975 litreDCT305-19851 litreDCT

10+5+1+Price Each

Order CodeSizeType

Non-Acrylic Conformal Coating Thinners (DCT)Ì Use to dilute coatings for use in dip and spray applicationsÌ Suitable for use with all non-acrylic based conformal coatingsÌ High purity solvent blendUniversal Acrylic Thinners (UAT)Ì Suitable for use with all acrylic based conformal coatingsÌ Use to dilute coatings for use in dip and spray applicationsÌ High purity solvent blend

Warning: Flammable contents, do not use on live equipment or near any source ofignition, use in a well ventilated area

CHM350Ì Please check with Sales Office for availability

Masking AgentChemask®

Ì Chemask® solder masking agents protect PC boards, plated through-holes, con-tacts, pins, posts and terminals during wave soldering

Ì Provide short term high temperature protection from molten solder to 268°CÌ Non-flammableÌ Non-contaminating leaving no residue, ionic or corrosiveÌ Solder masking agents available in convenient squeeze bottlesÌ Plastic safe, non-flammable, upper ozone safe; CFC/HCFC freeChemask®

Ì Dries tack-free in 30 minutesÌ Latex material is compatible with flux systems and stable with cleaning solventsChemask® HVÌ More controlled applicationÌ Thicker coating does not seep through thru-holesÌ Latex material is compatible with flux systems and stable with cleaning solventsChemask® DAÌ Dries tack-free in 30 minutesÌ No ammonia – low odourÌ Non-corrosiveChemask® WÌ Easily removed in water cleaning cyclesÌ UV indicator for positive quality controlÌ Non-corrosive; safe for sensitive gold, silver and copper contactsChemask® WFÌ Dissolves in water cleaning cyclesÌ Does not clog filtersÌ Non-corrosive; safe for sensitive contacts

CHM339

304-4427CWF15 LtrChemask® WF304-4415CWF8236mlChemask® WF304-4403CW15 LtrChemask® W304-4397CW8236mlChemask® W304-4361CHV15 LtrChemask® HV304-4350CHV8236mlChemask® HV304-4385CDA15 LtrChemask® DA304-4373CDA8236mlChemask® DA305-8700CM15 LtrChemask®860-529CM8236mlChemask®

24+12+1+Price Each

Order CodeMftrs.List No.SizeDescription

Page 14: Air Duster

612

19

612

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Heatsink CompoundsSilicone Heatsink Compound – DC340

Note: Not suitable or medical applications

Ì Non-melting siliconecompound

Ì Very high thermal conductivityÌ Electrically non-conductingÌ Will withstand long-term exposure to

high temperatureÌ Designed for mounting of semiconduc-

tor devices to improve heat transfer

Ì Other applications include the filling of temperature sensingdevices to improve heat transfer to sensing element

FOR SUITABLE APPLICATOR SYRINGE SEE ORDER CODE 146-312PAGE 604

101-685

100+50+10+1+Price Each

Order Code

Thermal conductivity 0.42W/m.K. Operating temperature 200°C max.Dielectric strength 21kV/mm

100g tube

CHM46

Thermal Management

725-572HTSP50T50ml Tube10+5+1+

634-920HTCP20S20ml891-344HTS35SL35ml Syringe317-962.HTC35S35ml Syringe317-950HTC10S10ml Syringe

288+144+36+12+1+Price EachOrder

CodeMftrs.List No.

HTCP – Non-Silicone Heat Transfer Paste PLUSÌ Silicone freeÌ High thermal conductivity – 2.5W/mKÌ Wide operating temperature range -50°C to +130°CÌ Non-melting and non-hardening

HTS – Silicone Heat Transfer PasteÌ High thermal conductivity – 0.9W/mKÌ Luer Lock syringe for hand or automatic applicationÌ Wide operating temperature range -50°C to +200°CÌ Non-melting and non-hardeningHTC – Non-Silicone Heat Transfer PasteÌ Silicone freeÌ 35ml Luer Lock syringe and 10ml syringe dispensersÌ Excellent non-creep propertiesÌ High thermal conductivity - 0.9W/mKHTSP – Silicone Heat Transfer Paste PLUSÌ High thermal conductivity – 3.0W/mKÌ Wide operating temperature range -50°C to +200°CÌ Non-melting and non-hardening

CHM154

Heat Transfer Compound – HTCAÌ Economic and easy to use, particularly for larger appli-

cationsÌ Excellent non-creep characteristicsÌ Wide operating temperature rangeÌ Thin, even film coatingÌ Low in toxicityÌ 100% Ozone Friendly

302-6863HTCA200200ml Aerosol12+6+1+

Price EachOrder Code

Mftrs.List No.

Warning: Product contains flammable solvent, do not use on live equip-ment or near any source of ignition, use in a well ventilated area

CHM352

Conductive Rubber Jointing Compound

CHM318

130-485TCR100100ml Tube50+20+10+5+1+

Price EachOrderCode

Mftrs.List No.

Ì Room temperature vulcanising ther-mally conductive rubber

Ì Thermal conductivity of 2W/mKÌ Wide operating range from -50°C to 230°C (peak at

260°C)Ì Use as a low strength adhesive, sealant or gasketing

compound

Thermally Conductive Adhesive – ‘Output’™ 315Self Shimming

Ì High thermal conductivityÌ Self shimming, produces a consistent

0.15mm gapÌ Controlled strength for serviceabilityÌ Eliminates the need for mechanical fasten-

ersÌ Ideal for use on heatsinks, thyristors, tran-

sistors, rectifiers, regulators etc.

25ml Adhesive + 18ml Activator

537-020.1705052100+50+20+5+1+

Price EachOrder Code

Mftrs.List No.

Two-Part Kit

Warning: Flammable contents, do not use near any source of ignition, use in a wellventilated area.

Note: Due to shelf life, this product should be used within three months of purchase inorder to maximise its performance.

Base compound Modified Methacrylete Tensile shear strength 7N/mm2 (1000psi)Colour Blue Coefficient of thermal expansion 1.1x10-4/-°CThermal conductivity 0.815 W/m.K Operating temperature -55°C to +150°CSurface resistivity 1 .2 1013Ω

CHM133X

Potting & Encapsulating MaterialsPrimer 1200

Note: Not suitable for medical applications

Drying time 60 – 90 mins. 500ml

Warning: Flammable contents, do not use near anysource of ignition, use in a well ventilatedarea.

Ì Air drying primerÌ Supplied as dilute solution of moisture

reactive materials in VM & P naphthaÌ Used to improve adhesion of room temperature vul-

canizing silicone rubber, after application to metal andplastic surfaces

CHM72X

101-683Clear, 500ml100+50+10+1+

Price EachOrder Code

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Ì Please check with Sales Office for availability

Page 15: Air Duster

19

613

613

Electrochemicals, Service Aids & Paints

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

s

Internet www.farnell.com Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

‘Silastic’ RTV Silicone Rubber – 9161

Note: Not suitable for medical applications

Ì Solvent-free easy topour liquid

Ì Cures at room temperature by additionof a liquid catalyst (supplied)

Ì Suitable for potting and encapsulationof electronic and electricalcomponents caulking and sealingapplications

Ì Supplied in kit form, each containingSilastic RTV 9161 and 4% N9162catalyst (by weight)

Cure schedule (by weight) Operating temperature range -50°C to +250°C2% catalyst @ 25°C 24 hrs. Dielectric strength 22kV/mm

Pot life – 1% catalyst 35 mins. Elongation 150%1.5% catalyst 25 mins. Tensile strength 2.75MPa2% catalyst 12 mins. Tear strength 2.2kN/m 3% catalyst 7 mins.4% catalyst 3 mins.

101-779Industrial kit, 5kg101-778Standard kit, 0.5kg

100+50+10+1+Price Each

Order Code

Warning: Flammable contents, do not use near any source of ignition, use in a wellventilated area.

CHM74X

‘Silastic’ RTV Silicone Rubber – 3110

Note: Not suitable for medical applications

101-686Catalyst, 0.5kg101-7113110 RTV, 5kg

100+50+10+1+Price Each

Order Code

Cure Schedule (by weight) Pot Life5% catalyst – 4 hrs. 50 mins.

10% catalyst – 2 hrs. 20 mins.20% catalyst – 1 hr. 5 mins.Operating temperature range -65°C to +250°CDielectric strength 24kV/mmElongation 180%Tensile strength 2.75MPaTear strength 3.5kN/m

Similar to 9161 RTV described above with differ-ing cure schedule and pot life.Colour: White

CHM75X

Silastic 145 RTV

Note: Not suitable for medical applications

Cure schedule 24 hrs. @ 23°C (room temperature)Working time @ 23°C 90-120 mins.Operating temperature range -50°C to +180°CDielectric strength 24kV/mmViscosity @ 25°C 10,500mPa.s.Specific gravity 1.15Hardness, Shore A 40Tensile strength 2.40MPaPack weight 5.5kgColour Blue

Ì Two part, low viscosity siliconeelastomer

Ì Non-toxic, with no odourÌ Excellent dielectric propertiesÌ Low specific gravityÌ Stable at low and high temperaturesÌ Protects against moisture and other

environmental attacksÌ No stress on encapsulated componentsÌ Easy to cut out, repair and

re-encapsulateÌ Developed for encapsulating high

performance electrical, electronic unitsand low voltage assemblies

CHM208

956-9835.5kg100+50+10+1+Order Code

Price Each

‘Sylgard’ Silicone Elastomer – 170

Note: Not suitable for medical applications

Ì Two-part medium-low viscosity liquid siliconeÌ Cures at room temperature to a flexible flame retardant rubberÌ Meets UL94V-O and MIL-S-23586DÌ Black base component and buff curing agent which is an aid to thorough blendingÌ Designed for general potting and encapsulating applications of modules, relays,

power supplies, amplifiers, transformers, ferrite cores and connectorsÌ Colour: Black/Grey

101-694Industrial kit, 10kg101-693Standard kit, 2kg

100+50+10+1+Order CodePrice Each

Mix ratio by weight 1:1 Operating temperature range -60°C to +200°CCure schedule @ 25°C 8 hrs. Dielectric strength 18kV/mm

@ 70°C 15 mins. Elongation 150%@ 100°C 8 mins. Tensile strength 3.5MPa@ 150°C 3 mins. Tear strength 1.7kN/m

Pot life @ 25°C 1 hr.

CHM76X

‘Sylgard’ Silicone Elastomer – 182 and 184

Note: Not suitable for medical applications

Type 182 Type 184

Mix ratio by weight 10:1 10:1Cure schedule 4 hrs @ 65°C 24 hrs @ 25°C*

15 mins @ 150°C 15 mins @ 150°CPot life @ 25°C 8 hrs 2hrsOperating temperature range -55°C to +200°C -55°C to +200°CDielectric strength 24kV/mm 24kV/mmViscosity, mixed 40 poise 40 poiseElongation 100% 100%Tensile strength 6.2MPa 6.2MPaTear strength 2.7kN/m 2.7kN/m*Full electrical properties achieved after seven days.

101-697Sylgard 184101-695Sylgard 182

100+50+10+1+Order CodePrice Each1.1kg Kit

Ì Clear silicone materialÌ Low viscosity liquidÌ Blends easily with curing agent and

flows around intricate parts.Ì Choice of cure schedules offers flexibili-

tyÌ Cures as a flexible incapsulantÌ Used for potting and encapsulation of

electronic circuits and components,where identification of components isnecessary

Ì Type 182 offers longer pot life makingit suitable for use in production runs.

Colour: Translucent

CHM77

Free Same Day Delivery

For orders received before 12.30pmwe provide free same day delivery.

Continued

Page 16: Air Duster

614

19

614

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Potting & Encapsulating Materials — continued

Epoxy Encapsulant

Ì Fulfils class V-O of flammability standard UL94Ì The filler fulfils outstanding arc and tracking resistanceÌ Encapsulant has high thermal conductivity to aid heat dissipationFlexible – 147-590 (CW1312GB)Ì Filled, flame retardant incapsulantÌ Fulfils class V-O of flammability standard UL94Ì The filler imparts outstanding arc and tracking resistanceÌ Low viscosity to aid mixing and pouringÌ Encapsulant has high thermal conductivity to aid heat dissipationÌ Ideal for large metal units and pressure sensitive devices

147-590.Flexible 147-589.Flame retardant

147-588.Low viscosity48+24+6+1+

Price Per PackOrder CodeDescription

A range of two-part encapsulants completewith mixing spatula, one pair of protectivegloves and instructions for use.

Low Viscosity – 147-588 (CY1301GB).Ì Transparent pale coloured encapsulantÌ For fast filling of small units and

components requiring visualinspection.

Ì Encapsulant provides good thermalendurance and excellent dielectricproperties.

Flame Retardant – 147-589 (CW1302GB)Ì Filled, general purpose, easy to pour

encapsulant.

Order Codes147-588 147-589 147-590

Mftrs. List No's. CY1301GB CW1302GB CW1312GBMix ratio by weight 100:30 100:11 100:9.5Mix ratio by volume 100:37 100:20 100:17.5Cure cycle @ 25°C 2 days 2 days 2 days

@ 60°C 2 hrs 2 hrs 4 hrs@ 100°C 1 hr 1 hr 1 hr

Usable life @ 25°C 50ml 2Æ hrs 2¥ hrs 3Æ hrs500ml Æ hr 1Æ hrs 1¥ hrs

Max. op. temp. Short term 180°C 180°C 150°CLong term 120°C 120°C 110°C

Deflection temp. (BS2782 method) 57°C to 63°C 57°C to 63°C FlexibleElectric strength (kV/mm) 12 to 14 10 to 12 10 to 12Viscosity mixed (poise) 12 20 100Hardness (Shore) D82 D82 C84U.M. Resin 2 273g 1 811g 1 957g

Hardener 2 9 4 g 1 9 4 g 1 9 4 gVolume (mixed) 630ml 550ml 600mlColour Pale Yellow Off White Off White

CHM78X

EncapsulantsEnseal Encapsulants

Enseal RTVG & RTVCÌ Two part system – Easy 1:1 mix ratioÌ Reversion resistantÌ Non-corrosiveRTVC – ClearÌ High optical transparencyÌ FlowableEB – Black EpoxyÌ Flame retardant – meets UL 94V-OÌ Conceals components completelyEnseal SGÌ Transparent green gelÌ Two part system – Easy 1:1 mix ratioÌ Easy to rework and repairÌ Extremely soft and flexible

RTVG – Grey OpaqueÌ Thermally conductiveÌ Conceals components completelyEnseal EB & ECÌ Two part system – Easy 1:1 mix ratioÌ Abrasion resistan, hard coatingÌ High strengthÌ FlowableEC – Transparent EpoxyÌ Excellent insulation properties

Ì Enseal Encapsulants seal and protect electronic componentsÌ Convenience packaging for precision applicationsÌ 4oz Squeeze bottles and 32oz Jar KitsÌ Two part 1:1 ratioÌ All Enseal products are Plastic Safe, Non Flammable & Upper Ozone safe CFC.HCFC

Free

304-4520950mlEN3032SG304-4518118mlEN304SG304-4506950mlEN2032CEC304-4490118mlEN204CEC304-4488950mlEN2032BEB304-4476118mlEN204BEB304-4452118mlEN104CRTVC304-4440950mlEN1032GRTVG304-4439118mlEN104GRTVG

10+5+1+Price Each

Order CodePack SizeMftrs.List No.Type

* Poor ** Average *** Good **** Excellent570500500415420

Dielectric Strengthvolts.mil ASTM D 149

2.7932.73.2Dielectric Constant @1KHz ASTM D 150

1.6 10151 10151 10151 10151 1014Volume Resistivity ASTMD 257Ω/cm

Transparent GreenGreyClear colourlessAmberBlackColor0.020.030.020.58

Thermal ConductivityW/mK

475cps2900cps2000cps2500cps9100cpsViscosity Mixed200°C204°C204°C163°C80°CMax. Operating Temp.30min2hr2hr2hr2hrUsable Life @ 25°C5.0min15min10min1hr30minCure @ 120°C6.0min1hr30min3hr1hrCure @ 90°C30min24hr12hr24hr6hrCure @ 25°C1 to 11 to 11 to 11 to 11 to 1Mix ratio by Volume1 to 11 to 11 to 11 to 11 to 1Mix ratio by Weight************Repair ability****************FlexibilityNoNoNoYesYesOrganic Solvent ResistantNoNoNoYesYesAbrasion Resistant

Enseal SGEnseal RTVGEnseal RTVCEnseal ECEnseal EB

CHM351

Twin Pack Encapsulating Systems

Ì Softer and more flexible than epoxies causing less stress on componentsÌ High abrasion resistance

Polyurethane

Ì Generally have higher temperature than polyurethaneÌ They are harder and stronger with better adhesionÌ Superior resistance to moisture during/after cureÌ Exhibit low shrinkage during cure

Ì Two part epoxy/polyurethane encapsulantsÌ Supplied in air tight plastic bag to correct mix ratioÌ Resin and hardener are separated by a resin proof clipÌ To mix, remove clip and ‘mix in the bag’Ì Safe and easy to use systemÌ Reduces risk of air contamination usually found when contentionally mixed

Epoxy

CHM93X

Epoxy

Ì Non-toxic flame retardant encapsulating epoxy resinÌ High electrical strength and thermal conductivityÌ System gives good cosmetic finish

Non DDM

FOR SPECIFICATIONS SEE CROSS REFERENCE CHART ON PAGE 54

General PurposeÌ Flame retardant epoxy resin and hardenerÌ Gives permanent environment protectionÌ Curing time can be decreased by baking between 50°C and 100°CÌ Can be used in most PCB components and materialsÌ Contains 4.4 Diaminodiphenylmethane, a toxic material. Should be used in a well

ventilated area with suitable eye/face protection and gloves

CHM79X

Page 17: Air Duster

19

615

615

Electrochemicals, Service Aids & Paints

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

s

Internet www.farnell.com Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

537-3421000g537-330500g537-329250g537-317100g537-30550g

Non DDM

148-2151000g147-163500g725-997250g147-162100g147-16150g

General Purpose100+50+10+1+Order CodeSize

Price Each

Polyurethane

Ì Two part flexible encapsulant designed to give environment protectionÌ Does not cause component stress by shrinkage during cureÌ Offers short gel timeÌ No exotherm, heat evolved problemsÌ Demonstrates good adhesion to a wide range of materialsÌ Ideal for flexible joints

Low Viscosity

725-950500gLow Viscosity

725-9851131g725-973566g725-961270g

Halogen Free

100+50+10+1+Order CodeSizePrice Each

Halogen FreeÌ Low cost, general purpose potting and encapsulation systemÌ Quick cure timeÌ Good adhesion to a wide range of substratesÌ Recommended for light electrical applications where the continuous temperature is

less than 100°C

CHM158

Epoxy – EER

Thermally Conductive

Ì Gloss/matt black flame retardant encapsulantÌ Operating temperature of up to 150°C, short term (130°C continuous)Ì Low exothermic properties during cureÌ Applications include potting PCB's, transformers, rectifiers, solid state relays etc.Ì Gloss finish achieved when cured above 25°C

Ì Gloss white flame retardant encapsulantÌ Free of abrasive fillers such as aluminaÌ Low exothermic properties during cureÌ High operating temperature in short term, 150°C (130°C continuous)Ì Applications include potting PCB's, power supplies, DC-DC converters,

transformers etc.Ì Thermal conductivity, 1.26W/mK

108-783250gThermally Conductive

108-781250gHigh Temperature

307-21861000g307-2174500g307-2162250g307-2150100g307-214950g

Non DDM

108-780500g108-779250g

General Purpose

100+50+10+1+Price Each

Order CodeSize

FOR SPECIFICATIONS SEE CROSS REFERENCE CHART BELOW

General Purpose

General Purpose - Non DDM

Ì Gloss black flame retardant encapsulantÌ Low exothermic properties during cure at ambient temperaturesÌ Applications include potting PCB's, coils, transformers or mould casting

Ì Black flame retardant encapsulantÌ Free of DDM or other aromatic aminesÌ Very low exothermic properties during cureÌ Cold or hot cure systemHigh Temperature

CHM94X

Polyurethane – EUR

Ì Black hard/tough casting resin/encapsulantÌ Excellent adhesion qualities to difficult substrates such as PVC, ceramics etc.Ì Good dielectric properties, water and chemical resistanceÌ Applications include potting intricate components, radio transmitters, PCB's etc.

Low Viscosity

Ì Grey , semi-rigid, low viscosity flame retardant casting resinÌ Excellent electrical insulation characteristicsÌ Good water and impact resistanceÌ Ideal for potting small and delicate components such as ferrites

Low Viscosity - Flame Retardant

Ì Blue flame retardant encapsulant developed for extreme and varying conditions andtemperatures

Ì Low shore A40 hardness allows resin to be easily broken away for componentrepair or fault finding

Self Heal

307-2198500gL.V. Flame Retardant.521-760250gSelf Heal

108-788250gLow Viscosity108-787250gRepairable108-786250gHigh Performance108-785500gGeneral Purpose

100+50+10+1+SizePrice Each

Order Code

FOR SPECIFICATIONS SEE CROSS REFERENCE CHART BELOW

Ì Translucent 'gel like' encapsulant with unique ability to 'self heal' when penetratedÌ Enables testing of circuits and devices through resin itself or to pass wires or con-

nections through the resin when in situÌ High water resistance and excellent electrical properties

Ì Black semi-rigid flame retardant encapsulantÌ Good water and impact resistanceÌ Cured product produces very little stressÌ Applications include cable jointing or potting transformers, power supplies or fer-

rites

General Purpose

High Performance

Repairable

Ì Black encapsulant with high toughness/tear resistanceÌ Excellent dielectric propertiesÌ Low water absorption and high resistance to sea waterÌ Applications include high quality potting, speciality cable jointing, terminations etc

CHM92X

Total Customer Care

Our aim is to ensure you are 100% satisfied. Ifyou ever have a query with your order,

call us on (65) 788 0200

Volume Pricing

If your requirements exceed the quantities inthis catalogue, please ring us on

(65) 788 0200.

Continued

Page 18: Air Duster

616

19

616

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Encapsulants — continued

TranslucentBlackBlueBlackGreyBlackWhiteBlackBlackBlackGreyBlackBlackBlackColourD57A40A90A75A85D83D80D85D75D75D90

Notmeasurable

D70 (16 hrs)D80 (200 hrs)

D50-60 After24 hrs @ 100°C

HardnessShore (D)

0.20W/m.k/m.k/m.k0.20W/m.k0.35W/m.k0.35W/m.k1.26W/m.k0.4W/m.k0.4W/m.k0.38W/m.k.<0.3W/m.k0.42 W/m.k1 W/m.k– 0.245W 0.30W Thermal

Conductivity

-NoYesNoYesYesYesYesYes to

UL94V-0Yes to

UL94V-0Only when

curedYes to

UL94V-0Yes to

UL94V-0Yes to

UL94V-0Flame

Retardency

8 Poise20 Poise34 Poise25 Poise30 Poise40 Poise124 Poise80 Poise90 Poise140 Poise125 Poise200 PoiseViscosity Mixed20-25 Poise

@ 23°C<130 Poise

@ 21°C

1025162012141010101010016.214.210Electric Strength

(kV/mm)

Flexible25°CFlexibleFlexible-Flexible60°C60°C50°C55°C– – Ambient50°CDeflection

Temperature

100°C120°C120°C125°C125°C110°C130°C130°C125°C115°C100°C100°C115°C120°CMax. Operating

Temperature

90 mins20 mins30 mins20 mins20 mins20 mins1.5 hrs2-2.5 hrs60 mins20 mins10 mins2 hrs1 hr1.5-1.75

hrsUsable Life

@ 25°C

----45 mins-300 mins300 mins150 mins–60-90 mins--20-30 mins@ Ambient

Gel Time(200g mass)

-------30 mins20 mins20 mins-2 hrs20 mins@ 100°C----4 hrs-4 hrs2 hrs 4.5hrs90 mins– 4 hrs90 mins@60°C

1 hour@ 80°C

24 hrs24 hrs24hrs24 hrs24 hrs24 hrs24 hrs24 hrs24 hrs24 hrs– 2-7 days24 hrsOvernight@ 20°C

Curing Time@ 25°C

2.10: 12.83 : 111.58 : 13.78 : 15.39 : 14.0 : 17.15 : 18.91 : 15.54 : 15.48 : 16.40 : 16.0 : 15.3 : 1 5.6 : 1Mix Ratio by

Volume

2.0 : 12.37 : 113.40 : 13.62 : 16.47 : 15.52 : 117.24 : 117.48 : 110.97 : 18.86 : 17.83 : 18.5 : 19.4 : 18.6 : 1Mix Ratio by

Weight

UR5083UR5528UR5044UR5041UR5597UR5547ER2074ER2001ER2188ER2002EL116FEL171CPX700KPX314ZGMftrs List No521-760108-788108-787108-786307-2198108-785108-783108-781307-2186108-780725-950725-985537-342148-215

307-2174108-779725-973537-340147-163307-2162725-961537-329725-997307-2150537-317147-162307-2149537-305147-161

thaneEpoxyEpoxyPolyure -

Polyure-thane

Self Heal

Polyure-thane

Low Visc.

Polyure-thane

Repairable

Polyure-thane

High Perf.

Low ViscosityPolyurethane -

Flame RetardantEpoxy

Therm Cond.Epoxy

High TempEpoxy Non

DDMPolyurethane

Low Visc.PolyurethaneHalogen Free

EpoxyNon-DDM

ElectrolubeRobnorCHM211

FillerEpoxy Metal Set Strip

A tape consisting of an outer layer of aluminiumfilled epoxy resin based putty with an inner core ofhardener.Ì Easy and convenient to useÌ Once cured, metal set can be drilled, filed or

tappedÌ Resistant to most solvents and lubricantsÌ To use cut to length, knead by hand and apply

to area for repairÌ Ideal for workshop or on-site maintainance

148-135110100850+20+5+1+

Price EachOrder Code

Mftrs.List No.

760mm reel

Cure schedule 30 mins. Workable life 5 mins.Fully hardened 72 hrs. Max. operating temperature 120°C

CHM80

Magic Bond

704-0714116004oz stick50+10+5+1+Order Code

Price EachMftrs.List No.

Temperature Resistance 49°C (wet), 121°C (dry)Solids 100%Dielectric Strength (ASTM D149) 300 volts/milCured hardness (Shore D) 75Adhesive tensile strength (ASTM D1002) 5N/mm2

Compression strength (ASTM D695) 83 N/mm2

Pot life (@ 24°C) 20 mins.Visosity Putty/hand kneadableColour Green\white (changes to white after mixing)

Ì Permanently repairs and patches metal, wood, concrete, fibreglass and ceramicsÌ Can be applied underwaterÌ Hardens in 10 mins. back in service in 1 hour and full strength in 24 hoursÌ Applications include, repairing tanks and drums, patching holes in pipes, stopping

leaks and repairing porosity holes in castings

CHM214

General Purpose PaintSuper EnamelGeneral Purpose Paint

Ì Finest all-purpose spray paint availableÌ Exclusive resin base not available to any other manufacturerÌ Ideal for exterior and interior surfacesÌ Non-fading and long-lastingÌ Combats corrosionÌ Suitable for wood and metal surfacesÌ Choice of 13 colours, 2 primers and 2 acrylicHeat resistance 150°CCoverage approx. 2.23m2

pnt56

324-1981Silver 324-1970Gold324-1968Gloss Clear Acyrlic324-1956Satin Clear Acrylic324-1944Grey Primer324-1932Red Oxide Primer 324-1920White Primer324-1919Royal Blue324-1907Pacific Blue324-1890Lawn Green324-1889Bright Red324-1877New Yellow324-1865Gloss White 324-1853Satin White 324-1841Medium Grey324-1830Satin Black324-1828Matt Black324-1816Gloss Black

48+30+18+12+6+1+Order CodeColourPrice Each400ml aerosol

Page 19: Air Duster

19

617

617

Electrochemicals, Service Aids & Paints

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

s

Internet www.farnell.com Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

Industrial Spray Any Way

.711-8351Blue711-8338Dark Grey711-8314Gloss White711-8302Flat Black711-8296Gloss Black711-8272Grey Primer

72+36+12+6+1+Order CodeColourPrice Each400ml aerosol

Ì Customised valve allows paint to flow in any positionÌ Delivers more paint per second, providing smoother and quicker coverage without

causing runsÌ Fast-dryingÌ Completely empties in any positionÌ Available in ten colours with two primersTouch dry 15-30 minsFully dry 1 hourRecoatable 5 minsHeat Resistance 121°CCoverage approx. 2.5-2.9m2

pnt23

High Visibility Fluorescent

711-9987Orange711-9975Yellow

48+36+12+6+1+Order CodeColourPrice Each400ml aerosol

Touch dry 30 minutesFully dry 1 hourHeat Resistance 120°CCoverage approx. 2m2

pnt28

Ì Bright, vivid paint offers three to four times thevisibility of normal paint

Ì Ideal for identification and safety markingÌ Can be used on wood, metal, paper and cloth

Rust Not

711-8995-Aluminium711-89837031Equipment Grey711-89585010Mid Blue711-89463000Fire Red711-8934-Matt Black711-89229005Gloss Black711-8909-Gloss White

48+36+12+6+1+Order CodeNo.ColourPrice EachRAL 500ml aersol

Ì Superior metal protectionÌ Resists chippingÌ Penetrates surface to form permanant bond that does not chip or flakeÌ Quick-drying and can be re-coated in minutesÌ Rust Not gives a deep, rich finish in either gloss or mattÌ Available in popular RAL coloursÌ Consistent colour: all Rust Not colours are computer matchedDrying time 15-30 minsRecoatable anytimeHeat resistant 150°CCoverage approx. 2.23m2

pnt24

Anti-Rust Primers.

711-9410Grey Primer711-9409Red Oxide Primer

72+36+12+6+1+Order CodeColourPrice Each500ml aersol

Ì Special anti-corrosive properties to increaselife and durability of the top coat

Ì Seals out moisture and inhibits rustÌ Protects and seals all bare surfacesÌ Non-sandable formulaÌ Suitable for interior or exterior useÌ Prepares the surface for Plasti-Kote Rust Not

Touch Dry 15-30 minutesFully Dry 1-2 hoursHeat Resistance 150°CCoverage approx. 2.3 to 2.6 m

pnt25

Hammer Finish PLASTI-KOTEÌ Metallic hammer

finish offers a unique, decorative, ham-mered effect finish

Ì Can be used on most surfaces toachieve a metal like effect

Ì Fast dryingÌ Corrosion resistant

324-2055Red324-2043Tool Box Blue 324-2031Gold324-2020Black 324-2018Green 324-2006Forest Green324-1993Silver

30+18+12+6+1+Order CodeColour Price Each400 ml Aerosol

up to 150°C Heat resistant Approx 2.23m2Coverage

PNT60

Hammer Finish

714-6413LHSIG2Silver714-6401LHBLA2Black714-6395LHWHI2White

100+50+10+5+1+Order CodeColourPrice EachMftrs.

List No.500ml

Ì Synthetic, hammered, metallic gloss finishÌ Inhibits rust formationÌ Camouflages imperfectionsÌ Recoatable after 15 minutesÌ Typically covers 5m 2 per litre

pnt47

Continued

Fixed Prices

We aim to maintain all prices in this bookfor the lifetime of this issue.

Page 20: Air Duster

618

19

618

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Floor PaintSingle-Pack Floor Paint

714-5123DJBRI5Whit 714-5111DJBLA5Black 714-5100DJPRG5LightGrey 714-5093DJDAG5Dark Grey 714-5081DJSHE5Green 714-5070DJCAR5Red 100+50+25+10+5+1+CodeColour Price EachOrder Mftrs.

List No.

5 litres

Ì Mid-sheen, quick-drying polyurethane finish

Ì Single packÌ Ideal for use on stone & concreteÌ Brush, roller or spray applicationÌ Dust retardantÌ Resistant to mild chemical attackÌ Suitable for surfaces subjected to

repeated/regular washingÌ Conforms to BS4310

Touch Dry 5 hoursDry Film Thickness not less than 43 micronsCoverage 60 m2 typically pnt45

Concrete Repair Motar CONCREN LTD

PNT58

721-332312kg Tub30+20+12+8+4+1+Order Code

Price Each

Concrete FailsBond to Concrete12N/mm2Bond to Steel (Blasted to S.A 2.5)12N/mm2Tensile Strength 30N/mm2Flexural Strength 80N/mm2Compressive Strgth

Physical Properties

Below 20°C these times will be increased7 daysFull Cure 6 hours Initial Hardness30 minutesPot Life2.1Specific Gravity

Material Properties

Ì Fast setting, open to light traffic within6 hours

Ì Durable hardwearing epoxy resin withexcellent abrasion resistance

Ì Chemically resistant to most industrialchemicals

Ì Non-shrinking, reduces potential failure Ì Permanent repair giving high compres-

sive strength after full cure (80N/mm2)Ì Multi-purpose as it can be used inter-

nally and externally, on both old andnew concrete

Patchfast is an easy to apply 3-component kit which can be used with confidence bymaintenance staff. Bonds and sets down to a feather edge which gives a hygienicimpervious finish that is easily cleaned. Patchfast can be used in aggressive environ-ments such as chemical process areas, steelworks, food and drink manufacturingareas, dairies, breweries, plating shops, abattoirs, engineering shops, production lines,workshop and warehousing areas.Coverage rate: 1.14m2 per 12kg @ 5mm deep

Road PaintMarking Paint. PLASTI-KOTE

PNT57

Ì One coat coverage Ì Tight spray pattern, minimises over-

spray Ì Not affected or washed-away by poor

weather conditionsÌ Non-clogging nozzle Ì Formulated for heavy-traffic areasÌ Suitable for concrete, grass, asphalt

and gravel Ì Typically applied to car parks, ware-

houses, loading areas and factoryfloors

Ì Touch dry in 2 to 5 minutes

721-2938Green 721-2926Red721-2914Yellow721-2902White

48+30+18+12+6+1+Order CodeColour Price Each750ml Aerosol

Layout Blue Ink

707-20285703472+36+12+1+Order CodeMftrs' List No.

Price Each400ml

Ì Allows clear, sharp definitionsÌ Will not chip or flakeÌ Resists wash offÌ Easy to apply & remove

pnt4

Strippers and ThinnersPaint & Varnish Remover

720-7001S816002.5 litre720-6999S81599500ml

48+24+12+1+Order CodePrice EachMftrs.

List No.

Ì Fast-actingÌ Non-dripÌ Water-washableÌ Does not discolour or change the

substrateÌ Softens paints & varnishes

pnt53

Corrosion ControlHeavy-Duty Rust Shield

707-178469100144+72+36+12+1+Order CodeMftrs. List No.

Price Each300ml aerosol

Ì Effective outdoor corrosion protectionÌ Thin flexible film – will not crack or chipÌ Dry film – does not attract dirt & dustÌ Easily handled – resists finger-print corrosion

The mild dewatering action means that the parts do notneed to be completely dry before application. Use for theprotection of metal parts stored for extended periods outof doors, in transit or indoors under severe corrosionconditions. Ideal for the protection of machines andequipment shipped overseas. Protective film also pro-vides residual lubrication for assembly etc.Colour fugitive red dyeFilm Type hard waxy film when fully curedFilm Thickness approx. 5 to 10 micronsCuring Time fully cured in approx. 48 hoursProtection Period outdoors: up to 12 months

indoors: typically in excess of 3 yearspnt2

Page 21: Air Duster

19

619

619

Electrochemicals, Service Aids & Paints

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

s

Internet www.farnell.com Sales Tel (65) 788 0200 Sales Fax (65) 788 0300

Zinc-Rich Primer

711-939275672+36+12+6+1+Order CodeMftrs. List No.

Price Each375ml aerosol

Ì Heavy-duty primerÌ For metal exposed to severely corrosive elementsÌ Ideal for water-submerged metalsÌ High zinc content fuses to metal surface, inhibiting

corrosionÌ For non-ferrous metalsÌ Cold galvanising spray; suitable for protecting welds

on galvanised materialTouch Dry 10 minutesDry 1 hourRecoatable 2 hoursHeat resistance 82°CCoverage approx. 2.3 to 2.6 m2

pnt50

Cold Galvanising Spray

707-184069515144+72+36+12+1+Order CodeMftrs. List No.

Price Each400ml aerosol

Ì Zinc-rich coating: solid content is90% zinc

Ì Permanent coating provides long-term corrosion pro-tection

Ì Ideal for both bare metal & damaged galvanised sur-faces

Ì Smooth coating will not crack or splitÌ Rapid drying

Appearance: mid-grey dry coating.Apply ROCOL CORPLAN Cold Galvanising Spray andallow to cure at ambient temperatures. Once cured thecoating is capable of withstanding very high tempera-tures. In tests the coating did not physically degrade andmaintained its integrity and thus protection up to 450°C,at which point the test could not go to higher tempera-tures. At this temperature the only alteration was a slightdis-colouring of the coating, protection was maintained.

Touch Dry 10 to 15 minutesFully Cured 24 hoursHeat Resistance 450°C

Dry Film Thickness typically 10 microns per coatCoverage approx. 3.2 m2

pnt3

LacquerClear Acrylic

711-954979548+30+18+12+6+1+Order CodeMftrs. List No.

Price Each500ml aerosol

Ì Durable all-weather coatingÌ Gives a transparent, flexible filmÌ Watertight and will not yellowÌ Protects and enhances other finishes e.g. fluorescent

coatingsÌ Effective in insulating electrical systems

Electric Resistance 10 ohm/cmDielectric Strength 800 volt/mmTouch Dry 20 minutesFully Dry 1 hourHeat Resistance 120°C

pnt26

Heat ProtectionHot Paint PLASTI-KOTE

Ì Formulated to resist temperatures of up to 650°CÌ Heat cured formula which forms a hard. long lasting finish that will not burn off,

chip or flake Ì Ideal for any surface exposed to very high heat

324-2134Blue324-2122Aluminium324-2110White 324-2109Black

48+36+12+6+1+Order CodeColour Price Each400 ml Aerosol

PNT61

Heat Shield

711-9963796144+72+36+12+6+1+Order CodeMftrs. List No.

Price Each500ml aerosol

Ì Available in a tough matt black finishÌ Provides durable protection for surfaces

subject to high temperaturesÌ Ideal for boilers, furnaces, exhaust pipes,

chimneys and many other applicationsÌ Will not crack, bubble, peel or fade

Touch Dry 15 to 30 minutesFully Dry 1 to 2 hoursHeat Resistance 425°CCoverage approx. 2.3 to 2.6 m2

pnt27

Page 22: Air Duster

620

19

620

Ele

ctro

chem

ical

s, S

ervi

ce A

ids

& P

aint

sElectrochemicals, Service Aids & Paints

Electronic, Electrical and Mechanical Prices are in Singapore Dollars and exclusive of GST

Notes


Recommended