w w w . a n j o s - v e n t i l a t i o n . c o m
M-G15 • 22 • 30 • 45 m³/h
BREAKABLE ADJUSTMENT SEGMENTS
INSTALLATION ON WINDOWS
AIR INLET
SELF-REGULATING Slot size : 354 × 12 mm
M-G 15 and M-G 22 m³/h models feature breakable segments for achieving flow rates of up to 30 m³/h.M-G 15, 22 and 30 m³/h models can also be fitted into 250 × 15 mm slots.
IMPORTANT
PRESENTAT ION
CE2A
GPE2A
GAE2A
M-G 45
M-G 15/22/30
CE2A outer cover is made of white ABS ASA or can be provided in the same colour as the M air inlet on request. To be fitted on surfaces protected from the elements.
GPE2A external grille is made of white polystyrene or can be provided in the same colour as the M air inlets on request. To be fitted on surfaces protected from the elements. Not to be used with the GAM anti-insect grille.
GAE2A external grille is made of anodised aluminium or aluminium with white or black finish. To be fitted on surfaces protected from the elements. Not to be used with the GAM anti-insect grille.
L (mm) H. (mm) Thk. (mm)
400 23 12
L (mm) H. (mm) Thk. (mm)
390 20 3
L (mm) H. (mm) Thk. (mm)
390 23 1
L (mm) H. (mm) Thk. (mm)
405 20 18
O U T D O O R S
I N D O O R S
M-G self-regulating adjustable windows air inlets have a minimum flow rate of 15 m³/h or 45 m³/h (at 20 Pa). They are designed to be fitted indoors and used with external outer cover or grilles. The M-G 15 model is fitted with breakable segments to achieve flow rates of up to 30 m³/h. All our M-G air inlets fit into 354 × 12 mm slots on windows.
M-G
• Breakable segments achieve flow rates of 22 or 30 m³/h with just one M-G 15. • Made of white polystyrene• Other colors : beige, bronze, light oak, golden oak, dark oak, grey, dark grey, anthracite grey, black and sipo mahogany• For use on vertical walls and all angled surfaces (e.g. roof windows and undersides of
roller shutter hoods)
These air inlets contain a flexible polyester strip that ensures a constant flow across a pressure range of 20 to 100 Pa.
Screws and screw caps are possible for the air inlets and outer covers (sold individually wrapped in kits with the air inlets and/or outer cover, instructions included).
M1 AND M2 SLEEVES :
EQ RIGHT-ANGLE SLEEVE :
TU TUNNEL SLEEVE :
L (mm) 50 70 100 140 200
Code 0222 0223 0224 0225 0226
L (mm) 100 140 160 200 250
Code 0232 0233 0234 0235 0236
L × H 80 × 80 100 × 100
Code 0242 0243
L (mm) 80 100
Code 0238 0239
Indoors, the window inlet is installed on the joinery and fixed with 2 screws.Spacers ensure that the air inlets are perfectly centred in the 354 × 12 mm slot cut into the frame. To fix on convex joinery, use a convex base between the air-inlet and the joinery.
Outdoors, a grille or outer cover is installed.Use a CA 30 outer cover on exterior walls (curtain walls) exposed to the elements.
The window inlets and the dedicated outer covers or grilles are screwed onto the sleeves in galvanized
M2 fixed sleeve fit in through-wall penetrations and M1 adjustment ducts fit into insulation. The assembly must be slightly inclined outward.
Fits into insulation or structural framework above windows.For use indoors with one M1 360 × 15 adjustment sleeve and one M air inlet, and outdoors with one GPE2A external grille.
To be fitted above windows before installing insulation. For use indoors with a M air inlet and outdoors with a GPE2A or GAE2A external grille.
steel (thickness 0.75 mm). The sleeves have 2 brackets (372 mm centre distance).
INSTALLAT ION
W I N D O W S
W A L L P E N E T R A T I O N S
Window slot
M-GCE2A
M1 Cross-section: 360 × 15 mm – Length (mm)
M2 Cross-section: 365 × 18 mm – Length (mm)
EQ Cross-section: 365 × 18 mm – L × H (mm)
TU Cross-section: 365 × 18 mm – L × H 37
The 22 m³/h model makes it possible to achieve flow rates of 30 m³/h. To do so, carefully break both breakable segments marked ‘22’ at the time of fitting.
The 15 m³/h model makes it possible to achieve flow rates of 22 or 30 m³/h. To do so, carefully break the snap-off tabs at the time of fitting. Break both breakable segments marked’15’ to obtain a flow rate of 22 m³/h or both breakable segments marked ‘22’ to obtain 30 m³/h.
M-G 15, 22 and 30 m³/h air inlets are delivered at the requested flow rate (15, 22 or 30 m³/h). The flow rate is indicated inside the air inlet (15, 22 and 30 markings). The smallest value indicates the flow rate.
M-G 45 m³/h air inlet : the flow rate is indicated inside the air inlet (45 marking).
I D E N T I F Y I N G T H E A I R F L O W
0 1 2 3 0 TO R C I E U - Te l . 0 4 7 4 3 7 4 4 4 4 , Fa x 0 4 7 4 3 6 2 0 6 0 , w w w. a n j o s -ve nt i l at i o n . co m
Air
flow
in m
³/h
0 20 40 60 80 100 120
Difference of pressure in Pa
60
50
40
30
20
10
0
M-G 22 + CE2A
M-G 30 + CE2A
M-G 45 + CE2A
M-G 15 + CE2A
Type Dn,e,w (C) Dn,e,w (Ctr)
M-G 15 + CE2A 33 dB 35 dBM-G 22 + CE2A 33 dB 35 dB
M-G 30 + CE2A 33 dB 34 dB
M-G 45 + CE2A 32 dB 33 dB
CETIAT* test report No. 1014056-2*CEntre Technique des Industries Aérauliques et Thermiques
Air inlets are characterised by their acoustic performance Dn,e,w (Ctr).
A I R F L O W
A C O U S T I C
C O L O U R S
T E S T R E P O R T S
P R O D U C T C O D E S
CHARAC TERIST ICS
Description Code
M-G 15 0121
M-G 22 0122
M-G 30 0123
M-G 45 0124
Rounded vent for M-G 0129
Description Code
CE2A canopy 0146
CA 30 canopy 7330
GPE2A external grille, plastic 0168
GAE2A AN grille, anodised alu 0164
GAE2A BL grille, alu w/white finish 0163
GAE2A NO grille, alu w/black finish 0162
The above codes refer to white-coloured products. To order a different colour, add the two letters of the desired corresponding colour to the end of the standard product code.
For example, to order a grey M-G 30 air inlet, add 'GR' to the end of product code '0123'.
Oct
ober
201
9 –
Non
-con
trac
tual
doc
umen
t
Products marked with this logo comply with the performance display recommendations defined by Uniclima
DISPLAY OFPERFORMANCE
These window inlets associated with outer cover comply the French standard NF E51-732.
RAL 9016 1013 8019 1011 8003 8024 7035 7011 7016 9011 8004
white beige bronze light oak
goldenoak
dark oak
grey dark grey
anthracitegrey
black sipo
BE BR CC CD CF GR GF G7 NO SI See below if ordering a colour other than white.