Air-Met Product Catalogue 2014

Air-Met Scientific

Product CatalogueSales | Service | Rental

OCCUPATIONAL HEALTH, SAFETY& ENVIRONMENTAL MONITORINGEQUIPMENT SPECIALISTS

Sales 1800 000 744Rental 1300 137 067www.airmet.com.au

Real-Time Dust & Aerosol Monitoring

Gas Detection & Monitoring

Surface & Dermal Sampling

Noise, Sound & Vibration Monitoring

Soil and Groundwater Monitoring

Air Sampling

Indoor Environmental Monitoring

Heat Stress Monitors

26

04

23

30

35

16

24

34

27Radiation Measurement

CONTENTS

Icons appear in this catalogue to provide a quick reference to assist you in instrument selection.

Product Icons

CORPORATE PROFILE

Quality ISO 9001

The rental icon indicates the equipment that is available for short term and long term rental.

The datalogging icon is displayed to indicate instruments that can data log.

The service icon indicates instruments that Air-Met Scientific provides repair, calibration and maintenance.

The consumables icon is displayed where consumables are available to compliment your instrument purchase.

The docking icon is displayed where the instrument is docking station compatible.

The kit icon is displayed where the equipment may be packaged as a kit.

The gas icon is displayed where gas is available to compliment your instrument purchase.

The sales icon indicates equipment available for purchase.

Contents

All information contained in this catalogue is believed to be accurate and reliable at the time of printing. Product images used in this catalogue are for illustration purposes only and actual instruments may vary in appearance.

To promote a cleaner, healthier and safer environment by supplying and supporting measuring and monitoring equipment used for identifying and controlling environmental hazards.At Air-Met Scientific, we firmly believe that a healthy and safe environment is of vital importance to everyone. At a global level, this environment, which we share with all other forms of life, is the only one we've got and we believe it is incumbent on the human race to be responsible custodians. At a local level, providing measuring and monitoring equipment to health, safety and environmental professionals, we believe is a worthy mission. The data obtained from this equipment is the first step in identifying and controlling environmental hazards regardless of their origin or location.

From humble beginnings in 1984, Air-Met has always striven to be a reliable partner for our customers in helping them manage the health, safety and environmental concerns of their businesses. Hence: Work with Confidence - a motto which we feel not only confirms our approach to business partnerships but our optimism that in our own small way, we can help make the environment cleaner, healthier and safer.

AIR-MET SCIENTIFIC

ADELAIDE | BRISBANE | GLADSTONE MACKAY | MANILA | MELBOURNE PERTH | SYDNEY

Our approach to business is founded on five key elements:

INTEGRITY - to be honest with our customers, employees and suppliers.

DETERMINATION - to offer the best possible products and support.

KNOWLEDGE - to have highly trained staff advising customers and servicing their instruments and for our facilities to hold relevant third party accreditations.

INNOVATION - to be willing to embrace new technology and opportunities.

RESPECT - to be a good corporate citizen by supporting worthy causes.

Proudly Australian owned by people who work in the business, since 1984, Air-Met has established a network of sales, service and rental offices covering Australia and South East Asia and staffed by dedicated and highly trained sales and technical personnel. The equipment we offer is sourced from reputable overseas and local suppliers and we are able to offer solutions designed specifically for local conditions by our skilled engineering team.

At Air-Met Scientific, our focus as always is to always provide a level of service that is second to none in the industry.

Head Office7–11 Ceylon Street Nunawading VIC 3131

Sales: 1800 000 744 Sales Fax: 1800 000 774

Rental: 1300 137 067 Rental Fax: 03 9877 1230

Gas Detection& Monitoring

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067

No matter the industry, workplaces are becoming more complex. Demands for increased productivity and efficiency persist to become the focal point of operations. In order to meet such high demands, employees working in potentially hazardous environments require a high quality, reliable gas detector that above all else, keeps them safe. The highly configurable Ventis is specifically designed to meet unique gas detection needs while maintaining worker safety. With the ability to detect from one to

four gases, the Ventis is available with or without an optional integral pump and is ideal for confined space or personal monitoring. In addition to multiple sensor and battery configurations, you can choose from a robust suite of accessories. Each of these options for configuration ensures that when you receive your monitor, you receive only what you need. Best of all, the Ventis is compatible with iNet™, enabling increased efficiency, safety and reduced costs.

GAS DETECTION & MONITORINGHand-held, personal and fixed instrumentation to detect and monitor for toxic gas, explosive gas and oxygen deficient conditions. For use in industrial, commercial and residential situations.

Ventis MX4 Multi-Gas Monitor

Detect from one to four gases with a wide range of sensor options.

Gain increased instrument visibility with a safety orange overmould.

Sensors: Combustible gases/methane – Catalytic O2, CO, H2S, NO2, SO2, Electrochemical.

Use the extended range battery for up to 20 hours (without pump).

Draw samples from up to 100 feet with an optional integrated sampling pump.

Unprecedented Capabilities & Versatility

IECEx, CSA, ATEX, ANZEx and UL certified.

PID O2 LEL H2S CO SO2 NH3 NO NO2 HCN CI2 PH3

Instrument run-tIme

PumP run-tIme

MX6 • • • • • • • • • • • • 24hrs 15hrs

TANGO TX1 – – – • • • – – • – – – 3yrs n/A

GASBADGE PRO – • – • • • • – • • • • 2,600hrs n/A

MX4 VENTIS – • • • • • – – • – – – 20hrs 12hrs

> Choice of ‘smart’ interchangeable sensors; CO, H2S, O2, NO2, SO2, NH3, CI2, CLO2, PH3, HCN, H2.

> Tough, compact and durable.

> Lifetime warranty.

> Easily and quickly adaptable to monitor different gases.

> PEAK, STEL and TWA readings and alarms.

> 1 year datalogging storage.

> Resistant to both water and radio frequency interference.

> Australian ANZEx Intrinsic Safety certification.

> 3-year run-time.

> Patent Pending DualSense™ Technology: increases worker safety, regardless of bump test frequency, while reducing overall costs.

> Three strobe-emitting visual alarm LEDs (two red; one blue).

> Louder Instrument Alarm: Alarms at 100dB at a distance of 10cm – twice the volume of the GasBadge Pro and any other unit on the market.

> Vibration alarm.

> Certifications: ATEX, IECEx.

> Weight: 126g.

SINGLE-GAS MONITORS

MULTI-GAS DETECTORS

Tango TX1 Single Gas Monitor For the Detection of CO, H

2S, NO

2 or SO

2

GasBadge Pro DS2 Dockable Personal Single-Gas Monitor

Summary of Industrial Scientific Gas Detectors and Sensors Available.

Gas not listed? Speak to us about finding you a solution.

> Monitors up to 6 gases continuously and simultaneously.

> Choose from 25 ‘smart’ sensors including PID and NDIR.

> Full colour real time display.

> Simple menu driven navigation.

> IECEx Intrinsic Safety Certification.

> Audible, visual and vibrating alarms.

> Up to 36 hours run time.

> Diffusion mode or internal sampling pump version.

MX6 iBrid Multi-Gas DetectorDS2 Dockable Personal Multi-Gas Monitor



> Automated bump-testing, calibration, record keeping, battery charging and instrument diagnostics.

> Ethernet and/or wireless connectivity – link to up to 100 remote stand-alone instrument docking stations.

> Graphical DSSAC user interface enables administrator to track instruments, print reports, set events and change parameters in any location.

> Transportable, stand-alone operation with no PC required.

> Increases safety with consistent calibration and bump tests.

> Provides proof of compliance with hard-copy records from an optional external printer.

> Multi-lingual support.

> Dedicated versions available for aspirated or diffusion Ventis monitors.

> Simple, two button operation allows the user to quickly and easily calibrate or bump test the equipment.

> LCD/LED indications of 'pass/fail' status.

> Internal memory stores up to 150 bump test and calibration reports before overwrite.

INSTRUMENT MANAGEMENT SYSTEMS/DOCKING STATIONS

DS2 Docking Station For MX6, MX4 and GasBadge Pro

V-Cal Stand-Alone Docking and Calibration Station

Bump Testing and Calibration

We are all aware that calibration of a portable gas monitors every month is a good idea to maintain optimal accuracy but bump testing seems to be the ‘Poor Cousin’. From a safety point of view, more emphasis should be placed on bump testing than calibration. Why? Two major reasons:

1. Sensors can fail at any time BETWEEN calibrations.

2. Because there have been safety recalls on carbon monoxide and oxygen sensors in the past and these sensors appeared fine (and the oxygen ones calibrated) BUT they didn’t respond to gas – very scary to witness!

We trust our LIVES to gas monitors and the ONLY way to PROVE they are working is to apply the appropriate gas to the sensor and watch them respond on the display and see the monitor go into alarm.

> Measures 100’s of different gases and vapours quickly and easily.

> Completely portable and lightweight, no power required.

> Precision hand-operated piston pump delivers accurate sample volume to detector tube.

> Concentration displayed by colour change in detector tube.

> Tests CO, CO2, Oil Mist and Water Vapour in CABA & SCUBA cylinders and airlines.

> Completely portable, no power required.

> Results available immediately.

> Complete range of tests takes just over 30 minutes.

SPOT-TEST GAS DETECTOR TUBES

ShUTDOwN SOLUTIONS

GAS

Kitagawa Precision Gas Detector Tube System

P41R Compressed Breathing Air Test System

Gas DetectionShutdown Solutions

As shutdown specialists we have extensive experience with primary and subcontractors in mining, industrial and petrochemical industries.

Air-Met Scientific will design and provide you with a system tailored to project requirements. We don’t just supply gas

detectors, our systems include everything needed for a successful shut down including laptop computers, ethernet hubs, cat 5 cable, gas, docking stations, pumps, probes, software, tubes and filters.

We even provide regular on-site visits to ensure everything runs smoothly.

PortaGas Portagreen Strip and Ship Recyclable Cylinder ProgramProviding a Low Cost, No Hassle Method of Returning Empty Gas Cylinders

The ecofriendly “Strip & Ship” recyclable calibration gas cylinder return program utilises a complete line of reusable, sustainable cylinders which can be conveniently returned to PortaGas with the Strip & Ship program at no added cost. This eliminates the additional cost and work associated with traditional cylinder disposal requirements. Simply:

1 Ensure the cylinder is empty with a regulator.

2 Strip the outer layer off the cylinder.

3 Place the cylinder in tube and send.

> Eliminates HAZMAT Liability.

> No Disposal or Return Fees.

> Easy To Return.

> All blends available.



Gas detectors alone are no longer enough to keep you and your team safe. A successful and effective gas detection program requires many elements including; reliable and robust equipment, painless service and safe behaviour.

Collected data shows that 3 in every 1,000 detectors used on a daily basis are likely to fail a bump test and subsequently fail to respond to gas if encountered during use.

iNetTM InSite is a docking station solution for portable gas detectors that provides the critical functionality and visibility needed to keep people safe. iNetTM InSite broadens the availability of iNetTM, Industrial Scientific’s unique Gas Detection as a Service solution.

This new solution is designed for end users who own their gas detectors and have the means of servicing and maintaining them, but are challenged with gaining visibility into their gas detection program.

A fixed monthly subscription to iNetTM InSite offered by Air-Met Scientific includes:

> iNet DS docking station(s) and future replacements.

> Unlimited access to iNet Control.

> Up to four hours of remote installation and training.

iNetTM InSite The Safest Way to Manage Your Gas Detection Fleet

Providing users with a 360 degree view of their gas detection program, iNetTM InSite can equip users with the ability to configure and manage their gas detection fleet via iNet Control, a Web-based application accessible from any PC Web browser.

Users can:> Schedule calibrations, bump tests,

instrument firmware upgrades and other automatic events.

> Set up alarm thresholds and other custom settings.

> View trends, performance metrics and custom reports to gain practical insight into their gas detection program. Talk to Air-Met today to evaluate the effectiveness of your gas detection program.

Leave it to Industrial Scientific to create the industry's first gas monitor maintenance program – a plan that puts the power of our team behind yours every day. With iNetTM, we offer comprehensive service and maintenance of all your gas monitors, including calibrating, repairing, replacing and providing instruments whenever needed. Through Industrial Scientific's Docking StationsTM and Internet technology, we'll automatically track the performance of all your monitors, and even provide weekly instrument status reports. It's convenient, safe and cost-effective, with a monthly service fee that's all-inclusive So call us today about iNetTM. And shift the burden of maintaining your monitors to our team – experts who take the protection of lives as seriously as you do.

You just can't get better maintenance.

Air-Met and Industrial Scientific Partners in the iNetTM solution



The world’s most advanced PID now even better. Independently verified as the best PID performing technology.

Specifications

> Resolution: 10 ppb or 0.033 mg/m3 benzene.

> Maximum Reading: – 40 ppm or 130 mg/m3 benzene in

tube mode.

– At least 4000 ppm in VOC mode.

> Accuracy: ±10% display reading ± one digit benzene.

> Response Time: 120 seconds. Progressive indication of benzene breakthrough is displayed in real time.

> Intrinsic Safety Approvals: – ITS09 ATEX 26890X.

– IECEx ITS 10.0036X.

> Battery Life: – Li-ion: up to 24 hours, charge time

6.5 hours.

– Alkaline: 3 x AA, up to 8.5 hours life.

> Datalogging: 120,000 data log points with date and time stamp.

> Alarm: – Flashing LED’s Amber (low alarm) Red

(high alarm).

– Sounder 95 dBA at 300mm (12") vibration on alarm.

– Pre-programmed TWA and STEL*.

> Flow Rate: 220 ml/min (150 cc/min flow alarm).

> Protection: IP65.

Features

> Immediate results on start up – no need to wait for readings.

> Fast to detect Volatile Organic Compounds (VOCs).

> Detects benzene without the need for a specific tube in areas of benzene gas only.

> Detects down to ppb levels.

> Continuous readings shown on display until max level is reached.

> Exceptionally easy-to-use and intuitive software.

> Large, clear backlit display and keypad.

> Easy to operate.

> Battery life up to 24 hours.

> Backlight responds to ambient light conditions.

Applications

> VOC detection at loading docks and barge operations.

> Confined space entry pre-screening during refinery and plant maintenance screening.

> Refinery down-stream monitoring.

> Hazardous material response.

> Marine spill response.

Tiger Select Measures Benzene and Volatile Organic Compounds All-in-One.The Tiger Select is a revolutionary hand-held gas detector with two mode operation for the rapid detection of benzene and Volatile Organic Compounds (VOCs) providing accurate, reliable data you can count on.

The PhoCheck Tiger with miniPID technology is the most advanced handheld photoionisation detector (PID) on the market for volatile organic compounds (VOCs).

> Patented Fence Electrode Technology.

> Dynamic range ppb to 20,000 ppm for specific volatiles.

> Fast 2 second response.

> Easy change miniPID Detector, Electrode Stack and Lamps.

> Batteries certified to be changed within hazardous areas.

> Battery life up to 24 hours.

> Intrinsically Safe ATEX, IECEx and CUL approvals.

> Loud audible sounders 95 dBA.

> Bright LED and vibration alarms.

Clear audio, visual and vibrating alarms.

PID independently verified as best performing on the market. Unrivalled sensitivity detects down to ppb levels.

Large LCD display for clear readings.

Longest battery life (16 hours).

Fastest (<13 second) response to hazardous gases & vapours (1 ppb – 5,000 ppm).

Measures 480 selectable compounds (10.6 eV lamp).

Applications include: industrial hygiene, chemical and petrochemical plants oil and gas, pharmaceuticals, emergency response - HAZMAT, mining, spillage investigation, aviation maintenance.

hAND-hELD PORTABLE MONITORS FOR VOCS

Cub Personal PID Gas MonitorDesigned for Fast Accurate Detection of Volatile Organic and Total Aromatic Compounds

Ion Science PhoCheck Tiger KitFor Rapid and Accurate Detection of VOCs

Comfortable and unobtrusive to wear, the Cub is the smallest, lightest, personal PID gas monitor available. The Cub has a dynamic range of 1 ppb to 5000 ppm, the widest on the market measuring 480 selectable compounds.

The Cub personal PID gas monitor is available as a standard instrument with 10.6 eV lamp for accurately detecting a wide range of volatile organic compounds

(VOCs) to parts-per-million (ppm) levels. The CubTAC ppm variant with 10.0 eV lamp accurately detects total aromatic compounds (TACs), including benzene.

The Cub’s PID sensor technology has been independently verified as best performing for speed, accuracy and humidity resistant operation. Its unique Anti-contamination and patented Fence Electrode Technology provide extended run time in the most challenging environments, giving you accurate results you can truly rely on.



The GFM 410 is an ideal portable instrument for monitoring and analysing gas content of landfill, biogas and contaminated land sites.

> Intrinsically safe.

> Weight: 750g.

> Measures methane (0–100%) and carbon dioxide (0–100%) using infrared sensors as well as oxygen (0–25%) hydrogen sulphide (0–1500 ppm) and carbon monoxide (0-1000 ppm) using electrochemical sensors.

GFM 410For Landfill Gas Extraction Systems and Flares

The GFM 430 Plus is a truly universal landfill gas analyser. It features all the features of the GFM 410 plus it measures gas concentrations, pressures, flows and temperatures. It can be used to equally

great effect at peripheral boreholes and gas extraction wells.

> Intrinsically safe.

Designed to monitor landfill gas extraction systems where H2S and CO monitoring may be required, the GEM 2000 Plus analysis landfill gas composition, calculates flow and much more with speed and accuracy. It is also intrinsically safe.

> Measures CO ppm and H2S ppm.

> Measures CH4 and CO2 in % volume.

> Measures static and differential pressure.

> Provides space for user defined comments.

> Certified intrinsically safe for landfill use.

> 10–14 hours operation from one charge.

> Records site and well conditions.

GFM 430Ideal for Monitoring Landfill Gas Migration

Landtec GEM2000 PlusMonitoring Landfill Gas Extraction Systems Accurately and Efficiently

Applications: Landfill Analysers

> Landfill operations.

> Waste water treatment plants.

> Toxic gas surveys.

> Refineries and petrochemical plants.

> Electric and gas utilities.

> Breweries.

> Marine and off-shore oil wells.

> Confined space entry.

> Food processing.

GFM410 GFM430 GEM2000 PLUS

INFrArED CH4 ANALySIS 0–100% • • •

LEL 0–100% • • •

INFrArED CO2 ANALySIS 0–100% • • •

ELECTrOCHEMICAL O2 ANALySIS • • •

ELECTrOCHEMICAL H2S ANALySIS • • •

ELECTrOCHEMICAL CO ANALySIS • • •

ELECTrOCHEMICAL SO2 ANALySIS – – –

ELECTrOCHEMICAL NO ANALySIS – – –

ELECTrOCHEMICAL NO2 ANALySIS – – –

ELECTrOCHEMICAL CL2 ANALySIS – – –

Borehole (low) Flow MeasureMent

FLOw rANGE -60 TO +100 L/HOUr – • •

FLOw rESOLUTION 0.1 L/HOUr – • •

BOrEHOLE PrESSUrE +1000/-1000 PA (TyPICAL) – • •

Landfill Gas Analysers Chart

LANDFILL ANALYSERS

GasCheck Leak Detectors Designed Specifically for Fast Accurate Detection of Gas Leaks

> Three models in the GasCheck Leak Detector Series:

> GasCheck G: The advanced micro-thermal conductivity sensor accurately detects the smallest of gasleaks down to cc/sec, mg/m3 or ppm levels.

> GasCheck Tesla: Highly sensitive helium leak detector designed for effective use within high magnetic fields found around the outside of Magnetic Resonance Imaging (MRI) scanners.

> GasCheck IS: The only ATEX approved, Intrinsically Safe leak detector on the market. Its Intrinsic Safety proves an ideal tool for use in areas classified as zone zero flammable, and can safely detect flammable gases.

EXOTIC GAS & VAPOUR DETECTION

Ion Science Mercury Vapour Indicator No Saturation, No Regeneration & Eliminates Instrument Downtime

> Dual beam UV absorption technology.

> Fast 3 second response rate.

> Accuracy: ±5 micrograms or ±10% reading.

> PTFE probe with moisture trap filter.

> Temperature: 10̊ C–50̊C.

> The MVI offers two detection ranges: 0.1–200 & 1.0–1999 microgram /cubic meter.

> Large digital display.

> Audible alarm.

Through the use of a common tracer gas such as helium or hydrogen, leaks in most pressurised systems can be located with pinpoint accuracy.

> Utilises either helium or hydrogen as a tracer gas.

> Operates in automatic (survey) mode or manual mode.

> Pinpoint accuracy with sensitivity from 25 ppm up to 100% concentration.

> Field replaceable moisture removing cartridge in wand.

> Light weight, telescoping ground probe with boot.

> Rapid charging Ni-MH battery with AC and car adaptors.

Multi-Gas Leak Locator Leak Detection Made Easy

CLPX Next Step Portable Isocyanate Monitor

> Colorimetric paper tape technology for ppb level measurements.

> Models for TDI, MDI and HDI.

> Datalogging and audible alarm.

Aeroqual 300

Aeroqual 500

Aeroqual 300 & 500 Ozone Monitor

> Available in 3 ranges; 0–0.500, 0–5.00 and 0–50.00 ppm.

> Portable (5 hours run-time) or permanently mounted with power supply.

> Audible alarm.

915 Light Portable Mercury Vapour Analyser

Portable Atomic Absorption Spectrometer

> Zeeman Background Correction which eliminates the effect of potential interferences.

> Range from 0.1 to 200 μg/m3.

> Real time, second-by-second readings.

> Low detection limit with the highest sensitivity.

> Bluetooth and USB interface.



AIR-MET FIXED SYSTEMS> Pre and post sales technical support.

> National mobile service infrastructure.

> Multiple sensor options and products.

> Strobes, sirens, alarm SMS notification.

Design, Installation, Commissioning, Service & Calibration. We don’t sell fixed system equipment – we sell fixed system solutions.

> 1–8 channels: 4–20mA and 0–1V gas sensor; semiconductor, RTD and thermocouple temperature sensor inputs.

> Large, high visibility LED scanning display.

> 8 customisable alarm relay outputs, optional Modbus output.

> Datalogging and live reading software options available.

> Wall mounted aluminium diecast enclosure.

> Wall mounted IP65 aluminium diecast enclosure.

> Large range of electrochemical sensors for oxygen and toxic gases.

> 4–20mA, 0–10V or 2–10V output options.

> 24V DC powered (3-wire).

> Optional aspirated sampling module.

> 1 or 2 points of detection from a single head in any combination of gases.

> ‘Smart’ sensor technology; large range of gases to choose from.

> Safety features include: automatic sensor recognition; zero and calibration fault protection; access code security.

> Explosion-proof housing.

> Australian ANZEx Approval.

> 4–20mA or 2–10V gas sensor input.

> Displays gas sensor type and concentration on backlit LCD.

> 2 customisable alarm relay outputs with LED status indicator.

> Internal power supply can power external alarm devices.

> Integral Xenon strobe-light.

> 4–20mA output for BMS etc.

FIXED SYSTEM APPLICATIONS

GasCommander 800DL 8 Channel Fixed Gas Detection Controller

GasCommander 100 Single Channel Fixed Gas Detection Controller

MonoTox Transmit 5000 Remote Gas Detection Transmitter

iTrans Fixed Gas Detection Transmitter

> Tamper-proof and water resistant.

> Multiple analogue outputs.

> Digital outputs.

> Measurement range: Low Concentration Ozone: 0.000–0.500 ppm. High Concentration Ozone: 0.00–5.00 ppm.

> Sensor type: gas-sensitive semiconductor.

> Operating temperature: -5̊ C–500 C̊.

> Relative humidity: 95% maximum (sensor head and base unit).

> Communication: RS485.

> Enclosure rating: IP20 & NEMA 1 equivalent.

> Renewable sensors for low cost operation.

> Response: T60 <30 sec.

> Accuracy: ±10% F.S.

> Sampling styles: diffusion, continuous, single point.

> Operating temperature: 0–40̊ C.

> Weight: <1kg.

> Gas specific sensors.

The Ion Science TVOC is a fixed continuous monitor for the detection and measurement of total volatile organic compounds (VOCs).

> Humidity resistant PID.

> Selectable detection range 0–100 ppm or 0–1000 ppm.

> Scaled 4–20mA analogue output.

> Intrinsically safe (ATEX).

> Operating temperature: -20–50̊ C.

> LED and 4–20mA output fault indication.

> Diffusive monitoring – no pump required.

> Multi-channel and multi-gas detection.

> Provides low ppm detection for all refrigerants.

> Meets ASHRAE Std. 15, in addition to mechanical, fire & building codes.

> Three user alarms adjustable between 50 ppm & 100% of scale.

> LCD shows ppm concentration, alarm, test, reset and fault diagnostics.

> Sensitivity: 20 ppm.

> Measuring range: 0–1000 ppm all refrigerants.

> Response time: <1 minute per channel.

> Single or multipoint sensing.

> Upgradeable to newer refrigerants.

Aeroqual 900Fixed Ozone Monitor Designed to Measure Ozone Concentrations

Haloguard IIICost-Effective Photoacoustic Infrared Monitoring for Refrigerant Gas

Bionics Diffusion Gas Detectors Simple, Compact and Complete Toxic Gas Detection Systems

Ion Science TVOC Detection and Measurements of Total Volatile Organic Compounds

Air Samplingwww.airmet.com.au Sales 1800 000 744 Rental 1300 137 067

> Programmable via keypad (PCXR8 only).

> Automatic fault shutdown with time retention (PCXR4 and PCXR8 only).

> LCD shows sample duration, flow and battery status (PCXR4 and PXR8 only).

> Sample hold feature (PCXR4 and PCXR8 only).

> PowerFlex Charger compatible.

> Programmable via PC (with DataTrac software) or keypad.

> Direct flow control with internal flow, temperature and pressure sensors.

> 8+ hour run-time with NiCd battery, PowerFlex Charger compatible.

> LCD shows flowrate, volume sampled, battery status etc.

> CalChek direct calibration system compatible.

> RFI/EMI-shielded, impact-resistant case.

> Programmable via PC (with Data Trac software) or keypad.

> Advanced ‘predictive’ flow control using internal pressure sensor.

> 12 hours run-time at 200ml/min with NiMH battery.

> Fault shutdown with data hold.

> LCD shows sampling parameters, battery and fault status.

> High and low flow in one compact sampler.

> Flow range of 1000 to 3000ml/min with low flow from 5 to 500ml/min).

> 8+ hour run-time with NiCd battery, PowerFlex Charger compatible.

> Automatic fault shutdown with time retention.

> LCD shows sample run time, battery and fault status.

> Compact and lightweight.

> RFI/EMI shielded and UL Listed for intrinsic safety (ATEX-approved model available).

SKC CONSTANT FLOw PERSONAL SAMPLING PUMPS

Pocket Pump 20–225ml/min Constant Flow Sampler

AirChek 52 Personal Sample Pump 5–3000ml/min Constant Flow Sampler

AirChek 2000 Air Sampling PumpDirect Flow Control 5–3250ml/min Sampler

Universal (XR Series) 5–5000ml/min Constant Flow Samplers

AIR SAMPLINGPersonal and area sampling pumps, sampling media, sampling accessories, calibration equipment and diffusive (passive) samplers for exposure level. For measurement of gaseous, vapour, dust, aerosol and bioaerosol contaminants in industrial, commercial and residential atmospheres.

> Direct flow control with internal flow and temperature sensors.

> Designed for extended range to 5000ml/min with extended operating run time (40 hours at 2l/min with Li-ion battery).

> LCD shows elapsed time and accumulated run-time.

> RoHS Compliant.

> UL listed for intrinsic safety (Li-Ion models only).

> Extended back pressure capabilities. Up to 127cm of water at 2l/min.

> Automatic flow fault.

> Automatic flow correction for changes in temperature provides accurate air volumes.

Specifications> Operational range: 5-3250ml/min.

- Low Flow range 5-500ml/min with adaptor (constant pressure operation).

- High Flow range 1000-3250ml/min (constant flow operation).

> Precision timing.

> Real time clock.

> Flow control: ±5 % of set point constant flow.

> Battery pack: NiMH rechargeable, 2.0 Ah, 4.8V.

> Charging time: Up to 3 hours using 223-240A, single fast charger 16 hours using 223-109A five station charger.

> Operating temperature: 0°C to +40°C (limited by Intrinsic Safety Certification).

> Casing IP Rating: IP64 (dust and rain proof).

> Large LCD display with continuous display of volume, low, time, battery status, temperature and atmospheric pressure.

> 3 button keypad, no tool programming.

> Auto shut down on flow fault.

> Auto restart if fault is cleared.

> Interrupt ‘hold’ feature.

> Auto delayed start and timed shutdown.

> Certifications: CE Marked, ATEX and IECEx Certified.

AirChek XR5000 5-5000ml/min Extended Flow Range Air Sampling Pump

> 5–2500ml/min constant flow with automatic fault shutdown and time retention.

> Certified intrinsically safe: Ex ia Groups I and IIC.

> Programmable via keypad.

> LCD shows sample duration, flow and battery status.

> Sample hold feature.

AirChek PCAZ8 AUSEx Certified Sampler for Underground Coal Mines

AirChek 3000 Air Sampling Pump ATEX and IECEx Certified

The AirChek 3000 with a patented internal flow sensor brings advanced electronic flow to air sampling. This technology allows the user to program a desired flow rate via either the keypad or a PC using the optional DataTrac software.


POCkET PUMP AIrCHEk 52 AIrCHEk 2000 AIrCHEk 3000 AIrCHEk Xr5000 AIrLITE UNIVErSAL SAMPLErS

FLOw rANGES (ML/MIN) 20–225 5–3,000* 5–3,250* 5–3,250* 5–5,000* 5–3,000* 5–5,000*

wEIGHT IN GrAMS 142 567 624 580 454 340 964

wEIGHT IN OUNCES 5 20 22 20.5 16 12 34

COMPENSATION rANGE

(INCHES wATEr)uP to

20 At 200ml

uP to

25 At 2l

uP to

30 At 2l

uP to

320 At 2l

uP to

10 At 5l; 50 At 2l

uP to

20 At 2l

uP to

40 At 2l

BUILT-IN TIMEr/CLOCk tImer tImer CloCk tImer tImer no tImer

CONSTANT FLOw yes yes yesyes (DIreCt flow

ControlleD) yes yes yes

PrOGrAMMABLE yes no yes yes yes no Deluxe moDel only

PC-COMPATIBLE yes no yes yes no no no

MULTI-TUBE SAMPLING yes yes† yes† yes yes† yes†wIth ADjustAble low

flow holDer

FLOw FAULT FEATUrE yes yes yes yes yes yesenhAnCeD & Deluxe

moDels only

rFI-EMI SHIELDED yes yes yes yes yes yes yes

COrrECTS FOr CHANGES IN ATMOSPHErIC PrESSUrE

no no yes yes no no no

COrrECTS FOr CHANGES IN TEMPErATUrE

no no yes yes yes yes no

BATTEry TyPE nImh or nICAD nICAD nICAD nImhlIthIum-Ion or AlkAlIne

AlkAlIne nICAD

BATTEry CHECk yes yes yes yes yes yesenhAnCeD & Deluxe

moDels only

AIR SAMPLING COMPARISON TABLE

*5–500ml/min requires accessory | † With adjustable low flow holder and constant pressure controller.

> 4–14 hours run-time (dependant on sampling head) with Li-Ion battery or continuous via AC adaptor.

> Programmable sampling time parameters via keypad.

> High-contrast digital display shows sample duration, flow and battery status.

> Versatile sampling accessories: wand for sampling in duckwork and other hard to reach areas and optional mounting bracket for viable impactor.

> Ideal for bioaerosol or asbestos clearance sampling.

> Up to 30l/min free air flow; 2–12l/min constant flow with critical orifice.

> 12.5l/min sonic flow for use with BioSampler.

> 240V AC operation.

> Oil free rotary vane type pump with vacuum gauge and control valve.

> Operating temperature range: 32 to 104°F (0 to 40°C).

> Weight: 5.4kg.

> Standards: None. Pump is not intrinsically safe.

> Not intended for use outdoors.

Vac-U-Go Bioaerosol SamplerFor Flow up to 30l/min and Sonic Flow Application

QuickTake 30 10–30l/min Constant Flow Sampler

Leland Legacy Sample Pump5–15l/min Constant Flow Sampler

Direct flow control with internal flow, temperature and pressure sensors.

LCD shows flow rate, volume sampled, battery status etc.

24 hours run-time with Li-Ion battery.

CalChek direct calibration system compatible.

Programmable via PC (with DataTrac software) or keypad.

SKC AREA SAMPLING PUMPS

> Wide flow range: 2–26l/min to free air.

> Fully programmable: Manual run/Timed run and delayed start/Intermittent sampling.

> Sturdy handle for easy portability.

> Long run times.

> High performance sampling capabilities.

> Battery or line operation.

> Flow fault feature ensures sampling integrity.

> Flite 2 is ideal for area and environmental monitoring, stack sampling, indoor air studies, asbestos monitoring, biosampling and for long term background monitoring.

> Uses Leland Legacy pump and IMPACT single stage inertial impactor for PM10 or PM2.5 sampling at 10l/min.

> Self contained with all accessories in heavy duty lockable Pelican™ carrying case.

> Ideal for remote locations or indoor air sampling.

> Pre-program automatic start and stop.

> Simple 3-button keypad for setting a single unattended sample run.

SKC Deployable Sampler Systems Portable 24 Hour Ambient PM Sampling System

Flite 2 Air Sampling Pump Portable, Versatile and Fully Programmable Pump for High Volume Air Sampling

Achieve flow rates that you couldn't reach before when using a personal sample pump. The Leland Legacy® provides the high flows (5 to 15L/min) and long run times of a vacuum-style pump in a compact, portable, and battery-operated sampler.

Rechargeable lithium-ion (Li-Ion) battery pack provides 24-hour run times with impactors and other sampling devices with low back pressures. The Leland Legacy is ideal for 24-hour indoor air studies and unattended ambient air sampling however is not recommended for high back pressure applications such as asbestos clearance sampling.


BIOAEROSOL SAMPLING

> Available in various configurations, flow ranges and accuracies for convenient calibrations in the field.

> Secondary standards only requiring periodic calibration against a primary standard.

> Choice of 3 ranges: 5–500, 50–5000 and 300–30,000ml/min.

> Instant readout of flow rate with ±0.5% of reading accuracy.

> Integrated interface software saves calibration data as text file (Model 510) or in searchable SQL database (Model 520).

CALIBRATORS & ACCESSORIES

> Samples viable micro-organisms by inertial impaction directly onto agar culture media.

> Precision tooled 200 or 400 hole, autoclavable aluminium impactor plate and housing with SureLock positive seal.

> Use with QuickTake 30 Pump.

> High collection efficiency for spore sizes ranging from 1.5–3.9μm.

> Well defined rectangular deposition for easy microscopic analysis.

> Collection slide with optically clear adhesive and positioning notches and flat edges for easy alignment on microscope stage.

> Model 311–1000 laboratory film flowmeter with tripod stand, 300–3000ml/min.

> Model 303 portable film flowmeter in carrying case, 5–500ml/min.

It is a requirement of our Australian dust sampling standards (AS 2985 & AS 3640) that:

> The pump flow rate should be adjusted accurately to the designated flow rate using a calibrated flowmeter.

> The calibration equipment and technique should be of such accuracy that the flow rate can be measured to within ± 5%.

It is a requirement of our Australian Dust sampling standards (AS 2985 & AS 3640) that ‘The pulsation ratio shall not exceed 0.2 and preferably be less than 0.1’. This is easily achieved by choosing SKC sampling pumps, the world leaders in air sampling. Air-Met Scientific have distributed SKC pumps for over 30 years.

For more information please visit our website www.airmet.com.au

> Brochures.

> Manuals.

> Links to Australian Standards and NIOSH & OSHA methods.

> User Guides.

> SKC Air Sampling Guides for pumps, passive samplers and skin sampling.

> Flow rate should also be checked prior to switching off the pump at the end of the sampling period.

Note: SKC pumps require little or no settling-in period prior to calibration.

> High collection efficiency; preserves micro-organism integrity and viability.

> Use with non-evaporating collection liquids and Vac-U-Go Sampler (see Area Sampling Pumps).

Defender 510 & 520 ‘DryCal’ Near Frictionless Piston Flow Calibrators

RotametersLightweight, Rugged and Portable

VersaTrap Uniquely Serial Numbered Cassettes for Micro-Organism Spore Sampling

Soap Film FlowmetersFor Quick and Accurate Flow Determination

BioSampler For 8 Hour Sampling of Viable or Total Bioaerosols

Calibrating Pumps Tech Notes Did you know?

Air Sampling Tech NotesDid you know?

BioStage Single-stage Viable Bioaerosol Impactor

> Collect sub-micron diesel particles.

> Internal Impactor with precision sapphire orifices screens out particles >1.0 μm.

> Single-use cassettes are tamper evident sealed to ensure sample integrity.

> High dust environments: use with the 225-68 DPM plastic cyclone.

Diesel Particulate Matter (DPM) Cassette Meets NIOSH Method 5040 Specifications

AIR SAMPLNG ACCESSORIESAir-Met has been servicing customers with SKC accessories and consumables for more than 30 years. If you need assistance with product selection or application, contact your local Air-Met representative.

> Using advanced sorbent technology and designed specifically for OSHA, NIOSH, HSE and USEPA methods.

> Batch consistency and strict quality control ensure fewer desorption efficiency determinations.

> Backup sections detect break-through and provide an indication of sample validity.

> Available in 25ml glass with a standard or fitted nozzle or 60ml inert and unbreakable Teflon.

> Complete range of Membrane and Depth filters in a variety of materials, pore sizes and diameters to comply with all relevant air sampling methods.

> 25 and 37mm filter cassettes in styrene and polypropylene; special conductive black polypropylene cassettes with cowl for asbestos.

> Available in a variety of materials (Kymar, FlexiFilm, FluoroFilm), septum/valve configurations and sizes.

> Strong, evenly sealed seams; ultra clean materials; leak tested.

> 225–69 Conductive Plastic Cyclone for respirable dust by AS 2985.

> Constructed of conductive plastic.

> Eliminates the static problem allowing for accurate results.

> Filter cassettes available in 25mm or 37mm sizes.

The IOM Personal Inhalable Sampler is a conductive plastic sampling head, that houses a reusable 25mm filter cassette with specified filter for the collection of inhalable airborne particles.

> Efficient particulate sampling up to 100μm.

> Removable 25mm cassette system eliminates filter handling.

> Designed specifically for OSHA, NIOSH and HSE methods.

> Ready to use, mostly in preloaded cassettes.

> Convenient and safe alternative to impingers but limited shelf life.

Sorbent Tubes, Thermal Desorption Tubes, PUF Tubes A Wide Selection of Tubes Available

Impingers For Collecting Airborne Hazards into Liquids

Filters & Filter Holders Preloaded and Weighted Filters for Particulate Sampling

Sample Bags For Gas and Vapour Sampling

Conductive Plastic Cyclone Measures Respirable Dust

IOM IOM Sampler for Respirable Dust by AS 3640

Coated Filters for Vapours & Aerosols Convenient Alternative to Impingers

Surface & Dermal Sampling


Passive sampler convenience combined with high sensitivity of thermal desorption. The patented* ULTRA III samples by diffusion and provides low ppb to ppt detection of compounds, including semi-volatile organic compounds (SVOCs).

Available with choice of 5 sorbents to better target compounds for indoor and ambient air sampling — including semi-volatile organic compound.

> Carbograph 5/Anasorb GCB1/Tenax TA/Chromosorb 106/Charcoal (solvent extraction).

*U.S. Patent No. 6,607,581.

> UMEX 100 uses 2.4-DNPH for formaldehyde and other aldehydes; complies with OSHA Method 1007 and HSE Method MDHS 78. Validated for 15 minutes to 24 hour sampling.

> 526 Series for formaldehyde based on NIOSH Method 3500.

> UMEX 400 uses 1-NITC for amines; based on OSHA Method 60.

> Validated against NIOSH and ANSI protocols for short-term, 8 hour and 24 hour sampling.

> Choice of sorbents for targeting specific compounds.

> Superior collection efficiency – samplers contain >300mg of sorbent.

> Highly accurate and reliable – proven performers in the laboratory and in the field.

> Variety of samplers available.

> Validated for OSHA Method ID140 and complies with HSE Method MDHS 16/2.

> Reusable capsule holder with replaceable sorbent capsule.

> Lowest cost per measurement available.

> Lightweight and easy to use – no pump needed.

> No moisture or chlorine interference.

> High accuracy, sensitivity and capacity.

Passive Samplers for Organic Vapours Identified as a Viable Alternative to Active Sampling in Seven OSHA Methods

Inorganic Mercury Passive Sampler Long Term Sampling up to 120 Hours

ULTRA III Passive Sampler Provides Results Comparable to Canisters for EPA Method TO-15

Passive Samplers for Formaldehyde, Amines, SO2/NO2, HCN, Ethylene Oxide and Nitrous Oxide For Gas and Vapour Sampling > Highly sensitive, instantaneous

colour indication of contaminant breakthrough.

> Available for Amines, Isocyanates, Hydrazine, Acids/Bases and Solvents.

Permea-Tec Pads For Evaluation of Glove Protection in the Field

> On the spot colour indication for Amines, Isocyanates, Hydrazine and Acids/Bases.

> Sensitive to levels equal or below exposure levels for comparable airborne contamination.

> Safe for use on skin or work surfaces.

Colorimetric Swypes For Screening Surface and Skin Contaminants

> LeadCheck: 2μg sensitivity; no false positives.

> ChromateCheck: 3μg sensitivity; no interferents identified.

> Wipe surface and send to laboratory for quantitative analysis.

> Sturdy material holds together during sampling but completely dissolves in hot water or acid solution during analysis.

> Use for antimony, beryllium, cadmium, chromium, cobalt, copper, iron, lead, manganese, molybdenum, nickel, vanadium and zinc.

> Includes 10 sterile swabs in transport tubes and 10 templates.

> Designed to check meth remediation/ clean-up.

> Fast on-site results and high sensitivity.

> Easy to use.

> Everything required, included in kit.

> Convenient kit contains all materials (except solvents) for OSHA wipe sample methods.

> Samples for metals, pesticides, amines, radionuclides, corrosives and dusts.

Ghost Wipes For Surface Collection of Lead and Other Metals

Wipe Sample Test Kit For Evaluating Surface Contamination

Sterile Surface Swab Kit For Biological Sampling

MethChek For Field Detection of Methamphetamine Residue

SURFACE & DERMAL SAMPLINGSwabs and test kits for detecting skin and surface contamination due to lead, cadmium, mercury, nickel, chromate, amines, isocyanates, fungal spores and other biohazards occurring in industrial, commercial and residential environments.

Heavy Metal Surface Sampling Swab Kits Instant Colour Change

> Completely safe, no reagents ever touch test surface.

> Suitable for both flat and irregular surfaces.

> Immediate colour change provides instant results.

> Exposed wipes can be sent to laboratory for further quantitative analysis.

Full Disclosure Kit For Instant Detection of Lead on Skin and Surfaces

Indoor EnvironmentalMonitoring


The VELOCICALC® Air Velocity Meter 9535 is like having multiple meters for the price of just one.

> Simultaneously measure temperature and velocity.

> Calculates volumetric flow and actual/ standard velocity.

> Displays up to three measurements simultaneously.

> Data log 12,700+ samples and 100 test IDs.

> Articulated probe version available (9535-A).

> Accurate air velocity measurement.

> 0–6,000ft/min (0–30m/s) range.

> Model 8345 is available for rental only.

INDOOR ENVIRONMENTAL MONITORINGReal-time monitors for continuous short or long-term measurement and logging of indoor environment parameters such as carbon dioxide, temperature, relative humidity and dewpoint.

> Measures and displays CO2, temperature, humidity and CO simultaneously.

> 20+ hours datalogging with TrakPro software analysis.

> Power from AA alkaline batteries or AC adaptor.

Q-Trak Indoor Air Quality Monitor Provides Quick, Reliable, Accurate Information to Assess Key IAQ Parameters

ANEMOMETERS

> Accurately measures air velocity, temperature, calculates flow rate and determines average, minimum and maximum readings.

> Over 2800 logging samples with time and date stamp.

> Operating range 0–25m/s and 0–80°C with a resolution of 0.1m/s and 0.1°C using a 4" diameter rotating vane head.

> Log, store and recall data.

> Clear digital display.

> Download to a PC.

Rotating Vane Anemometer Accurately Measures Air Velocity and Temperature

Hot Wire Anemometer Designed for Use in the HVAC Industry

> The make-up air intake could be in the underground car park & may be drawing in elevated levels of carbon monoxide causing headaches to the buildings’ occupants.

> New flooring or furnishings may be off-gassing formaldehyde or other VOCs.

> Mould may be growing in wall spaces and releasing spores & microbial VOCs.

Just looking at these parameters we are generally looking at three units to take measurements however we can use the EVM to measure CO2, RH%, temperature, CO & VOCs all in ONE unit; if we wanted to we could also measure air flow and real time dust while concurrently collecting a dust sample for later analysis…. A much easier solution.

Indoor Air Quality (IAQ) Tech Notes

Traditionally IAQ monitoring has looked at temperature, relative humidity & carbon dioxide. This is great if you are a HVAC engineer and are only interested in balancing the make-up air flow to reduce costs BUT these parameters are only part of a good IAQ survey that a professional would undertake.

‘Sick Building Syndrome’ has been reported in the press from time to time and the causes are almost never to do with the standard three parameters. Many conditions can cause problems with IAQ – for example:

Simultaneously Measure Particulate and Gas Concentrations

>Reduces the need for multiple instruments.

>Lowers the cost of ownership.

Dial-in Rotary Impactor

>Twist and click selection of particulate

settings: PM2.5, PM4, PM10 or TSP.

90° Light Scattering Photometer

>Mass concentration engine offers real-time

measurement of particulates.

Built-in Sampling Pump for Gravimetric Analysis

>Allows user to insert a 37mm filter cassette

to capture particulates for laboratory testing.

EVM-3 Environmental Monitor Real-Time Direct Reading Particulate Monitor

The EVM-3 provides real-time direct

reading of particulate concentrations, along

with temperature and relative humidity

measurements. The dial-in impactors

allow for quick selection of particulate

settings PM2.5, PM4, PM10 or TSP without

disassembly.

A built-in air sampling pump assists in the

collection of particulates while the laser

photometer provides real-time measurement.

A standard 25 or 37mm gravimetric cassette

can be utilised for sampling and laboratory

analysis, and help provide correlation for

real-time direct reading measurements.

EVM-4 Environmental Monitor Comprehensive Indoor Air Quality Analysis

The EVM-4 is designed for comprehensive

indoor air quality analysis with its ability

to simultaneously monitor and log one

toxic gas, carbon dioxide, relative humidity

and temperature.

The instrument’s compact size and

displayed overview of parameters make

indoor air quality assessment easy.

This versatile monitor features a tripod

mount and security code protection for

unattended stationary studies.

Additionally, the EVM-4 offers calculation

of room air exchange rates with carbon

dioxide trending algorithms for in-depth

air quality evaluation (with 3M Detection

Management Software).

EVM-7 Environmental Monitor

This instrument combines both the EVM 3

& 4 and a PID to provide a particulate and

air quality monitoring in one instrument.

The 3M EVM-7 offers the unique capability

to simultaneously measure particulates

(mass concentration),

volatile organic compounds (VOCs), toxic

gas, carbon dioxide (CO2), relative

humidity, temperature and air velocity

(with optional accessory).

Applications

>Work site monitoring.

>Industrial fence line monitoring.

>Industrial hygiene surveys.

>Remediation sampling.

>Military site evaluation.

>IAQ walk through & stationary studies.

>Internal vehicle sampling (aircraft, trains).

>Air quality assessment.

>Construction/Mining site monitoring.

>VOC screening and monitoring.

>Time-history assessment.

>Regulatory compliance.

The 3M EVM Series of Particulate Concentration Air Quality MonitorsWhat do you get when you cross a real-time aerosol dust monitor, an indoor air quality monitor and a PID? One very versatile instrument!

RadiationMeasurement


‘Fibrecheck’ is a portable, direct reading instrument for the routine assessment of fibrous aerosol hazards, in particular for those involving asbestos and MMMF.

> Min detectable fibre diameter: 0.2u (typ).

> Min resolvable fibre aspect ratio: 1:3 (typ).

> Fibre types: Serpentine, Amphiboles, Vitreous, Organic, Ferrous.

> Audible annunciation.

> Rechargeable battery / 10 hours operation time.

> Sampling inlet is designed to sample efficiently in a broad range of wind conditions.

> The lead acid batteries included provide 24 hours run-time.

DustTrak Environmental EnclosureProvides Additional Security and Protection of the DustTrak

PORTACOUNT Respirator Fit TesterFit Test Any Tight-Fitting Respirator Including N95, P2 and P1 Disposables

> Faster N95 fit testing time – down from 10 minutes 24 seconds to 7 minutes 15 seconds.

> Stand alone operation – no external computer required. Use with external computer to generate reports and print fit test cards.

> Able to perform N95 fit testing with much lower ambient particle concentrations.

> OSHA-compliant for all respirators, including N95.

> Automates fit testing with FitPro™ Fit Test Software.

> Colour touch screen.

DustTrak & DustTrak II Aerosol Monitors Provides Instantaneous Readout of Dust Concentrations

> Real-time area dust monitor using the light scattering principle.

> PM10, PM2.5, PM1.0 or respirable particle size ranges.

> Ideal for quick spot checks or long term advanced logging modes.

> 31,000 data points for storage (21 days at 1 minute intervals).

High Volume Sampler For Use in Outdoor Environment Dust Monitoring

> Fully programmable up to 7 days.

> Maintains constant air flow while using either TSP, PM10 or PM2.5 head.

> Supplied with filter support and transport cover to alleviate contamination of the sample.

> Quiet in operation.

> True mass flow sensor guarantees flow control and accurate results.

> Applications include ambient samplings of different parameters such as dust, asbestos, fibres and gases. The High Volume Sampler can also be used in quarries.

REAL-TIME DUST & AEROSOL MONITORINGLight scattering devices for measuring and logging of airborne particulate concentrations in the breathing zone and ambient air.

FibreCheck FC-3Real-Time Asbestos Monitor

RADIATION MEASUREMENTPortable and personal devices for the measurement and protection against the damaging effects of electromagnetic, radio frequency and microwave radiation.

> Electric fields from 0.02–1000V/m.

> Magnetic fields from 0.6mA/m–300A/m.

> Auxiliary input for spectrum analysis of external signals.

> Separate 3-axis and total values.

> Built-in frequency spectrum analysis.

> Maximum BW resolution of 1kHz for detailed measurements.

> Calculation of the field wave impedance.

> Built-in rechargeable battery.

EHP 200 Electromagnetic Field Analyser

> Isotropic measurement with internal electric and magnetic sensors.

> Electric and magnetic low frequency field analysis up to 100 kHz.

> Built-in FFT spectrum analysis.

> Small size and optical fibre connection for spot measurements.

> Built-in rechargeable Li-Ion battery with great autonomy.

> Optical Fibre Interface to PC or NBM-550.

> Stand-alone continuous acquisition with internal data logger for 24 hours.

EHP-50DElectronic & Magnetic Isotropic Field Analyser

> Covers frequency range of EFA-300 as well as pulsed magnetic fields used in industry and the home.

> Direct evaluation of field exposure in comparison with major standards.

> Acceptance measurements to CE standard IEC/EN 62233.

> Real-time measurement with RMS and peak detector.

> Automatic evaluation even with different signal shapes.

ELT-400 Exposure Level Tester

LOw FREQUENCY MONITORS

RadiationMeasurement


> Shows the source and magnitude of individual contributions to the overall field strength and evaluates them on-site.

> Standard-compliant measurement with isotropic (non-directional) results from 9kHz to 6GHz.

> Automatic antenna and cable recognition.

> Options: Code-selective measurement (UMTS P-CPICH demodulation). Scope Mode.

> Used in broadcasting, telecoms, EDGE, WiFi, WiMAX, mobile radio, radar and air traffic control.

SRM-3006Selective Radiation Meter

NBM 550 Accurately Measuring Electric and Magnetic Fields

NBM 520

NBM 580

> Uses isotropic E-field and H-field probes to measure the electric and magnetic field components – simply, precisely and non-directionally.

Broadband Field Meter for Electric and Magnetic Field Measurements from RF to Microwave.

Features

> Available with Isotropic Probes to cover 100kHz to 60GHz.

> Plug-and-play Probe Interface with Automatic Probe Parameter Detection.

> Fully automatic zeroing.

> Extra small & lightweight.

> Can also measure the true power of pulsed electric fields if fitted with a suitable measuring probe.

> Easiest 4 button operation.

> Remote operation via optical link.

> Interoperability with NBM-550 (controller).

> Allows central control of multiple field sensors.

> Built-in, low and high power alarm relays.

> Touch screen controls.

> Fibre optic and USB inputs.

> IEEE-488 or Ethernet connectivity.

Large graphic display.

Stores up to 500 measurement results.

Optional GPS and voice recorder.

Stamps data log with co-ordinates and saves carrying a notepad and pen while climbing towers.

159mm

hIGh FREQUENCY RADIATION MONITORS

Allows Users to Combine Multiple-Sensor Installations into a Fully Functioning Monitoring or Alarm System

Features

> Up to 8 input metering station for NBM Meters and/or NS3 Monitors.

Nardalert S3 is worn on the body and gives visible, audible and vibratory warning when the electric field power density approaches or exceeds the permitted limit. The warning thresholds are user settable.

> Automatic evaluation of exposure frequencies according to human safety standard.

> Data logger option.

> USB interface for battery charging and downloading measurement data.

> Display of distribution of high and low frequency components.

> Calibration interval: 3 years.

PERSONAL RADIATION MONITORS

AREA RADIATION MONITORS

RadMan is worn on the body and emits a loud warning signal when 50% of the maximum permitted flux density is exceeded. An earphone can be attached so the signal can be heard even in very noisy environments if exposure standard exceeded.

> Audible and visual alarm.

> Used in broadcasting, telecoms, mobile radio, radar and air traffic control.

> Four LEDs indicate the electromagnetic radiation flux density in stages of 12.5 %, 25 %, 50 % and 100 %.

> RadMan XT version is equipped with a datalogger.

RadMan Personal Electromagnetic Radiation Monitors Personal RF Personal Monitors

Nardalert S3 Personal Radiation Monitor Personal Radiation Monitor for Electric Fields with On-Site Interchangeable Sensor Modules

Area Monitor that can be installed on ceilings and walls, with automatic frequency response evaluation according to a selected standard.

> Emits warning sounds and registers alarms if user settable thresholds are exceeded.

> 2 MHz to 100 GHz in a single monitor.

> Continuous, automatic monitoring – no operator required.

> Recorder output.

> Battery or low voltage DC operation.

> Weatherproof housing option.

> Real time frequency response evaluation.

> Ideal for security installations in aircraft hangars or military facilities.

Smarts II Area Surveillance Radiation Monitors Surveillance Monitor - Fixed High Frequency Warning Device

> Complete solution for remote monitoring of electromagnetic field strength.

> Magnetic field probes cover a frequency range of 20Hz to 3kHz, with high frequency sensors up to 40GHz.

> Solar powered with GSM modem (requires DATA enabled SIM card).

> Memory capacity: 45 hours to 18 months depending on storage rate and detection mode selected.

> Recommended 24 month calibration interval.

AMS-2600 Area Monitor System Continuous Electromagnetic Field Area Monitor

Noise, Sound &Vibration Monitoring


determine dominant sound sources in the environment, improve your product quality, minimise development time and to save your resources.

> Powerful HD algorithms.

> Real-time sound imaging for quick results.

> AVI, WAV and result exports.

> Digital and robust 24bits microphones.

> Localisation from 40 Hz up to 20kHz depending on the configuration.

> Dynamic range more than 40 dB possible.

Fully weatherproof (IP55) with unique waterproof microphone.

Integrated 3G, Wi-Fi, Ethernet, USB and HDMI connectivity.

3 days internal battery life with more than 60 hours operating lifetime in nominal mode (multispectra, Wi-Fi, 3G).

Built in high contrast colour screen.

SDHC Memory (32Gb).

Automated calibration.

Easy to use with single button start and 3 keys for easy control at your fingertips.

All parameters measured in parallel.

Aluminium profile treated housing with side grips to ensure comfortable and secure handling of your robust DUO.

Remote control: Wireless remote access to all functions of the DUO.

Sound Level Meter and Monitoring Station

DUO introduces the "Smart Noise Monitor", the new generation of environmental noise measuring instruments, devoted to:

> Classical hand-held sound level meter measurements using the built-in keyboard and screen or a wireless remote control (Wi-Fi, 3G).

> Short, medium or long-term stand-alone measurements, the operator having full remote control of the instrument.

Control your measurements! Access to your measurement points, from near or far.

With DUO and dBDUO Integrated web client, you can access settings, stored data, real-time visual display of sound levels with:

> A built-in screen to start and control a measurement in the field.

> An internet connected device (Wi-Fi, 3G) for overall control of the site, from your office or... from the coffee shop around the corner.

Measurements are accessible at any time and from anywhere.

Fully Weatherproof

DUO is protected and safe, come rain (or snow) and shine.

Its housing has been designed for outdoor use under all weather conditions. Its integral protection makes DUO discreet in the measurement environment. Developed exclusively for DUO, its all-weather microphone/cone set is manufactured by G.R.A.S., the world-renowned company specialised in precision noise transducers.

Operating Battery Lifetime and Memory

You can take the weekend off, DUO won’t stop measuring. With long battery lifetime, full remote control of the entire instrument, and a high memory capacity, DUO opens up a new dimension in noise measurement.

Assured Metrology and Data Security

Relax, DUO reaches new heights in reliability. Programmable in-situ, automatic electrical checks and precision class components guarantee metrological reliability. With 0° and 90° incidence corrections it gives flexibility whatever you measure. To secure your instrument DUO has a unique anti-theft system.

DUO is innovative and unique in the market of sound level meters dedicated to environmental noise measurement.

O1DB DUO – Smart Noise Monitor for Noise Measurement in the Environment

Designed to fulfil your needs in all situations, the simple to use FUSION offers the best available technology to meet your needs for on-site analysis and noise monitoring.

FUSION offers an innovative solution for noise and vibration measurement, with high-performance features designed to facilitate analysis. It offers excellent connectivity, enabling you to manage your measurement sessions and optimise your operations remotely.

> Wireless 3-axis vibration signal measurement.

> Built-in 3G modem, WiFi 802.11b/g/n, Ethernet and ADSL connections.

> Built in GPS.

> All weather G.R.A.S. 40CD microphone.

> Built in pre-amplifier.

> Text message notifications of acoustic events and operation problems.

> Real-time display of data.

> IEC 61672 Class 1 Certification.

CUBE is a noise monitoring terminal that can fit into all forms of enclosure: all weather case, plastic or metal cabinet, etc to suit a wide range of noise monitoring applications.

The CUBE stays connected around the clock, operating continuously and responding simultaneously to your requirements: acoustic and meteorological measurements, automatic publication of data, communication of alarms, as well as parameter configuration changes, real-time display or listening option, etc.

> Built-in 3G modem, WiFi 802.11b/g/n, Ethernet and ADSL connections.

> Built in GPS.

> All weather G.R.A.S. 40CD microphone.

> DMK01 outdoor microphone.

> Real-time display of data.

> Text message sent upon low internal battery.

> 24-hour backup battery.

> IEC 61672 Class 1 Certification.

CUBE Smart Noise Monitoring Terminal Versatile Noise Monitoring Terminal to Suit All Types of Applications

FUSION Smart Sound & Vibration Analyser Innovative Solution for Noise and Vibration Measurements

NOISE & SOUND MONITORINGHand-held and personal instruments for the measurement and logging of Noise Dose and Sound Pressure Level in commercial and industrial workplaces.

Noise Inspector offers an accurate, fast and smart technology for sound source localisation. With great ease of system setting up, sound and vibration emissions becomes quickly visible in real-time.

Furthermore the software is easy to use for non-specialists and offers great functionality for professionals. The results are acoustic images or movies, easy to interpret for everybody, and easy to communicate. Noise Inspector is the perfect mobile tool to help you

Noise Inspector Acoustic Camera Solutions Offering Fast and Accurate Visibility into Sound and Vibration Emissions Real-Time

Noise, Sound &Vibration Monitoring


Advanced eg4 with dual dosimeters and datalogging/time history; eg5 Australian approved intrinsically safe dosimeter with C-A capability.

Light weight (85gm) with thin, contoured mount designed for wearer comfort.

IP Rated 65.

Rechargeable Li-Ion battery 60+ hour run-time.

1 or 5 bay ‘EdgeDock’ docking station for recharging and downloading data. QuestSuite and DMS softare compatible.

Air-Met Service will repair your instrument and restore it to manufacturers’ specifications. Trained and qualified mobile technicians assess your instrument and provide a detailed report and quotation for repair.

To ensure your equipment is operating correctly and monitors are producing accurate results, regular maintenance, service and calibration is required. Air-Met maintains an AS-NZS 9001 Quality System, registered and audited by SAI Global. In addition, our gas detector calibration service is accredited by NATA. Air-Met Scientific is also the only certified Industrial Scientific service provider in Australia.

AIR-MET SERVICE, MAINTENANCE & CALIBRATION

Speak to your local Air-Met representative about our comprehensive service management solutions.

> Seven National Service and Repair workshops.

> On-site service via our fully equipped service vans.

> Tailored Total Care Service Options.

> Calibrations.

> Extended instrument warranty solutions.

> ISO 9001 & NATA accreditations.

Air-Met will service all instrument brands – products include:

> Gas detectors.

> Sound level meters.

> Noise dosimeters.

> Heat stress monitors.

> Dust monitors.

> Air sampling pumps.

> Confined space monitors.

> PIDs.

> Indoor air quality.

> Radiation monitors.

> Water quality and environmental equipment.

Air-Met’s fully trained technicians care for your equipment, offering the right advice, reliable technical service, fast turnaround times and quality calibrations. With service centres in most Australian mainland capital cities, there is one near you.

The Edge family of lightweight personal noise dosimeters features advancements in user comfort and technology, making it easier than ever to monitor noise levels. Its compact, cable-free design mounts on the shoulder and weighs just 85 grams, so it is both comfortable and easy to wear.

Specifications

> Measuring Range: 70dB–140dB.

> Peak Range: 110dB–143dB.

> Device Setup: Easy quick setup via DMS.

> Datalogging: LAVG or LEQ, Max, Peak and Overload Indication at one minute intervals.

> Battery Life: Edge 4: 60+ hours.

Edge 5: Intrinsically Safe, 40 hours nominal without LED activated.

> Certifications: ATEX, IECEx, IP65, RoHS.

> Alerts users to potentially dangerous noise levels.

> LED light delivers clear indication of when noise levels exceeds hazardous threshold.

> Red Flashing LED: Noise levels > 85dBA – hearing protection may be required.

> Green Flashing LED: Noise levels <85dBA – hearing protection may not be necessary.

> Rechargeable battery. Operates for up to 200 hours between charges.

> Auto-Power Off.

Designed for dosimetry, sound level measurements, heat stress analysis and environmental monitoring, this advanced software helps safety and occupational professionals to:

> Retrieve, download, share and save instrument data.

> Generate insightful charts and reports.

> Export and share recorded data.

> Perform advanced calculations.

> Integrating/Averaging: Computes average sound pressure level for accurate asessment of intermittent sound levels.

> SLM Range: 40–130 (dynamic range).

> User selectable LED Alert Screen.

> Compact and lightweight design accommodates one handed operation.

> Rechargeable battery.

>CE Marked.

> Accurately measures noise levels in highly variable environments.

> Computes the average sound pressure level (LEQ/LAVG) over the run time.

> Variable, user selectable data logging intervals with user-determined measurement parameters.

> All models shop ready-to-use.

> DMS Software Compatible.

> SLM Range: 30-140dBA (Single Range).

> Available measurements: SPL, LMAX, LMIN, Lpk, LEQ/LAVG, Elapsed Time.

> Simple, precise and easy to use.

> The AC-300 is an acoustic calibrator for calibrating precision Class/Type 1 as well as general purpose Class/Type 2 sound level meters and noise dosimeters.

> CE, RoHS, WEEE and C-tick Certified.

Sound Examiner SE-401 and SE-402Type 1 and Type 2 Basic Sound Level Meters

AcoustiCal AC-300 For Precise and Simplistic Calibrations

> Advanced noise analysis with two ‘virtual’ sound level meters running simultaneously; concurrent A and C weighted measurements.

> Available in Type 1 or 2 and with datalogging (DL models only) and compatible with QuestSuite Professional II and DMS Software.

> Optionally equipped with 1/1 and/or 1/3 octave real-time frequency analysis.

SoundPro SE/DL Integrating Sound Level Meters

Noise Indicator NI-100 Easy, Lightweight (17g), Durable Noise Level Detector

Detection Management Software (DMS) Third Generation Support Software

Sound Detector SD-200 Type 2 Detector for Measuring Workplace Noise Levels

EDGE 4 & 5 Cable-Free Noise Dosimeters

SUPPORT SOFTwARE CALIBRATORS

33

On-site service via our fully equipped service vans.

Soil & Groundwater Monitoring


YSI Pro Plus

The Ultimate Handheld Sampling Instrument.Tougher. Smarter. More versatile.

Designed to be tough and smart in the lab or field. And extremely versatile. The Pro Plus accommodates any combination of YSI Pro Series cables, sensors, and accessories. Want to measure DO in the field? Maybe pH/DO/ Nitrate? Or Perhaps you need it to be a lab instrument that measures BODs? What ever you need, the Pro Plus is your choice.

SOIL AND GROUNDWATER MONITORING

Backlit display and keypad.

2,000 data-set memory with GLP event logging.

Certifications: RoHS, CE, WEEE, C-Tick, VCCI, FCC, IP-67, 1m drop test.

IP-67 waterproof instrument (floats) with 3 year warranty; 2 year cable warranty.

DO, pH, Conductivity, ORP, Ammonium, Nitrate, Chloride, Salinity, Total Dissolved Solids, Barometric Pressure, Resistivity.

Interval or single-event logging capability.

Easy-to-use software to manage all your data.

TougherDo your job with confidence even in the harshest field conditions. The drop-tested Pro Plus was designed tough with military-spec connectors, a two-year warranty on all cables, weighted sensor guards, and a rubber over-moulded case with three-year warranty. Its interchangeable sensors and extra-durable cables eliminate down time. And its low overall cost of ownership means you’re making a worthwhile investment for years to come.

More VersatileConnect any cable and probe option to the instrument and use the convenient cable management kit to keep everything simple and organised. Cable options range from 1–30m choices (up to 100m on DO only cables). Use lab or field probes and switch between the two quickly. The Pro Plus makes an ideal lab BOD instrument with the proven self-stirring BOD probe. A convenient hand strap can be used on either side of the instrument. A complete family of accessories also increases the versatility of the Pro Plus. Choose among accessories including carrying cases, flow cells, cable weight, belt clip, tripod, and c-clamp.

SmarterThe technology-smart YSI Pro Plus has all the built-in support you’ll need for the lab or field. It provides multiple languages, detailed GLP data, on-screen help to eliminate the need for a bulky manual, sensor diagnostics, up to six-point auto-buffer recognition, re-cal prompts, user-defined auto-stable function, and security passwords for extra protection. And much more.

hEAT STRESS MONITORS


The series of 3M™ QUESTemp° Heat Stress Monitors provide safety professionals with the durable, easy-to-use instrumentation needed to measure and analyse heat stress related exposure levels.

From manufacturing to military applications, there is a QUESTemp° Heat Stress Monitor for your application.

> QUESTemp° 32/34/36 – delivers high-performance monitoring through WBGT (Wet Bulb Globe Temperature) sensing

technology and the calculation of a WBGT Index value.

> QUESTemp° 44/46/48 utilises a waterless wet bulb sensor designed for working environments where daily instrument upkeep is difficult.

> Convenient stay time parameters per multiple standards help determine work-rest ratios.

> IP 54 Ingress Rating – helps protect unit from dirt, dust, oil and water.

> Intrinsic safety available on selected models.

HEAT STRESS MONITORS Personal, portable and fixed heat stress monitors. Used for the measurement and logging of the WBGT index as an indicator of thermal stress in high temperature, high humidity and high physical activity working environments.

Detects individual physiological response with temperature of the external auditory canal near tympanic membrane.

> User-selected alarm trip points provide audio alert to elevated core temperatures.

> Recorded data can be used to evaluate worker response to heat stress loads and assist in developing preventive measures.

> DMS Compatible.

QUESTemp°II Personal Heat Stress Monitor Easy to Use Personal Heat Stress Monitor

QUESTemp Area Heat Stress Monitors Designed to Quickly and Accurately Evaluate Potential Heat Stress Environments

It is essential to assess thermal risk and manage thermal hazards associated with the work environment to protect the health of the workforce in order to reduce time lost due to thermal illnesses and increase the efficiency of working in the heat. The TWL-1S can be applied to indoor and outdoor work sites for assessing thermal risk levels.

Once the TWL has been identified, it is recommended that there is a schedule for work, rest and rehydration in order to maximise worker safety. The remote paging function will also enable site managers to stay alert with high thermal risk within 200 meters.

> 4 essential sensors for thermal comfort measurement.

> 2 Heat Indicies: TWL and WBGT.

> Measurements: Wet Bulb Globe Temperature (WBGT), Thermal Work Limit (TWL), Globe Temperature, Dry Bulb Temperature, Relative Humidity, Wet Bulb Temperature, Wind Speed.

> Data logging.

> Risk level indicator.

> Wireless remote notification.

> Shipped with tool box and tripod for easy carriage and use.

> Scarlet software TWLIT for quick setup and data download.

TWL-1S Smart Heat Stress Monitor Designed to Prevent Heat Stroke and Illness for Workers in High Temperature Environments



The optional GPS function, wide range of sensors, and varying cable lengths allow for complete customisation of the ProDSS. Mil-spec (military spec) connectors and a waterproof (IP-67), rubber over-moulded case ensures durability to provide years of sampling even in the harshest field conditions.

> Single cable design with depth option - universal ports can accept any 4 sensors

> Long-life rechargeable lithium-ion battery to power handheld and sensors

> Colour display and backlit keypad allow for sampling in all lighting conditions

> Digital smart sensors are auto-recognised by the instrument and store calibration data

> User-replaceable cables and sensors provide versatility, reduce down time and reduce overall cost of ownership

> Large memory (> 100,000 data sets) with site list and Data ID tag capabilities

> KorDSS, a powerful data management software with geo-mapping capability, is included with the instrument

> USB On-The-Go connector for PC connection, recharging/powering the ProDSS and connecting directly to a USB stick

> Global Positioning System (GPS) (optional)

> Cable lengths up to 100 meters available with or without a depth sensor

> Rugged, waterproof case (IP-67 rated) with rubber over-mould and metal, military-spec (MS) cable connectors as well as rugged titanium sensors

> Multiple languages in handheld and KorDSS: English, Spanish, Portuguese, French, German, Italian, Japanese, Norwegian, and Chinese (simplified and traditional)

Parameters:> Dissolved Oxygen (Optical)

> Turbidity

> pH

> ORP/Redox

> Conductivity

> Specific Conductance

> Salinity

> Total Dissolved Solids (TDS)

> Resistivity

> Seawater Density

> Total Suspended Solids (TSS)

> Depth

> Ammonium

> Ammonia

> Chloride

> Nitrate

> Temperature

Applications:> Surface water

> Groundwater

> Coastal waters

> Aquaculture

> Low battery indicator with 100 hour battery life.

> Replaceable optical sensor cap (12-18 month life).

> Auto shutoff function after 30 minutes of inactivity.

> 50 data set reviewable memory.

> IP67 waterproof rating.

With the 9300 and 9500 photometers, you can eliminate sample preservation by taking your portable, waterproof instruments to the field to perform the analysis on-site.

> Direct reading concentrations.

> Waterproof IP-67 rating.

> Large, backlit graphic display.

> Multiple languages.

> Waterproof USB connection that can also power the instrument (9500 model).

> Internal memory for 500 sample sets (9500 model).

A handheld DO meter that provides extreme durability for measuring dissolved oxygen with optical, luminescent based technology for any field application.

> Smart data management with 500 data-set file and site list memory with Data Manager desktop software.

> Certifications: RoHS, CE, WEEE, C-Tick, VCCI, IP-67, 1m drop test, assembled in USA.

> No flow requirement/Non-consumptive.

> Probe fits standard 300ml BOD bottles.

> Multi-lingual.

> 3 year instrument warranty and a 2 year cable and probe warranty.

The YSI MultiLab line of instruments provide easy to use and easy-to-calibrate menu-driven operation ideal for any laboratory.

> Large, easy to read displays.

> Intelligent Digital Sensors (IDS) for plug-and-play connectivity.

> GLP Compliant (sensors store serial # and calibration data).

> Data storage via USB connectivity – Manual: 500 data sets. – Automatic: 5,000 data sets

(Model 4010-1), 10,000 data sets (Models 4010-2 and 4010-3).

> 3-year instrument warranty.

The ODO200 simultaneously measures dissolved oxygen, using optical technology and temperature:

> Automatic temperature compensation.

> 1-, 4- and 10-meter durable field cables available.

> Manual input for salinity and pressure compensation.

wATER QUALITY METERS

YSI ProODO Dissolved Oxygen Tough Field Worthy Handheld DO Instrument

YSI MultiLab Line Benchtop Instruments One, Two or Three Channel Benchtop Meters for pH, ORP, Conductivity and/or Optical Based Dissolved Oxygen Measurements

EcoSense ODO200 Optical DO/Temperature Meter Accurate, Economical Handheld Dissolved Oxygen Measurements Using Optical Technology

YSI 9300/9500 PhotometersSimple, Convenient and Accurate

YSI ProDSS Multiparameter Sampling Instrument

Portable Digital Sampling System for the Measurement of pH, ORP, DO, Conductivity, Turbidity, Temperature, Depth and More.

SOIL AND GROUNDWATER MONITORING


The rugged and reliable ProDSS allows for measurement of up to 17 parameters. The ProDSS features user replaceable digital smart sensors that are automatically recognised by the instrument when connected. A backlit color display, large memory, convenient calibration procedures, rechargeable battery, and powerful PC data management program (KorDSS) make the ProDSS extremely user friendly.



The Model WQC-24 is the latest development in DKK-TOA’s range of multi-parameter water quality meters. This instrument combines a compact, high performance and robust water quality monitoring system.

The 45mm outer diameter sensor probe can provide measurement of up to 11 parameters simultaneously out of a total of 17 available parameters. The instrument also features an interface port for connection to a Global Positioning System (GPS), Local Area Network (LAN) printer or other communication peripherals.

8 Standard Parameters> Max 11 Parameters out of 17 available (pH, ORP, DO, EC, Tubidity,

Temprature, Salinity, Total dissolved solids, Specific gravity and water depth plus Chlorophyll and Ions of NO3

-, Cl-, F-, Ca2+, K+, NH4

+).

> Independent Sensor Memory/Logger.

> RS232 Interface for external peripherals.

> Built in data logging storage capacity for 35 days of continuous measurements (based on measurements every 15 minutes).

> GPS receiver compatible.

> Base configuration includes pH, DO. turbidity, temperature, conductivity, salinity, total dissolved solids, and specific gravity.

> Flexible interface port. Compatible with GPS, printer RS-232C, LAN, cellular phone or other data communication peripherals.

> Measurement to a depth of 100m is possible.

Model wQC-24 Multiparameter water Quality Meter (8–11 parameters plus water depth available)

PetroSense PHA 100 Hydrocarbon Analyser For Accurate Detection of Hydrocarbons in Water

The detection and measurement of total petroleum hydrocarbons (TPH) in water was historically achieved by sampling followed by gas chromatography or infrared analysis. With the advent of PetroSense® PHA-100, the world’s first patented fibre optic chemical sensor (FOCS®) built into a portable analyser; it is now possible to measure ppm levels of TPH in vapour or water in the field and in real time (in-situ).

> Detects total petroleum hydrocarbons directly in water, vapour and floating liquid.

> Operates in analytical or screening mode.

> Provides in-situ, real-time information.

> Quick zero.

> Automatic media sensing.

> Easy to use menu-driven software.

> 3rd Party certified equivalent to EPA Method 8020.

> Florida DEP approved equivalent to FID for soil vapour analysis.

> Probe stability indicator.

> Logs data from 100 samples.

> Serial output to laptop or printer.

> Easy to calibrate.

> Intrinsically safe, UL, CUL, KEMA ia, CE.

Geotech Interface Meters

wATER & INTERFACE METERS

Geotech Water Level Meter Designed to Provide Reliable and Accurate Measurements of Groundwater Levels

Water level readings are conveniently taken at the top of the casing with accuracy within 3cm.

Features> Highly accurate polyethylene coated steep

tape marked in engineering or metric increments.

> Extremely durable polypropylene storage reel with rugged solid aluminium frame.

> Adjustable sensitivity to prevent false triggering.

> Field serviceable 5/8" (1.59 cm) probe with stainless steel conductors for durability. An optional 3/8" (0.95cm) non-field replaceable probe is available.

> Audible and visual alarm activated when the probe makes contact with water.

> Easily replaced 9V battery.

When the Interface Meter is lowered down a well and contacts the product layer, a solid tone and green light alarm is activated on the reel. When the probe detects water, the tone begins to oscillate and the light changes to red.

Premium quality poly-coated steel tape in 30, 60 and 100 meter lengths on a polyethylene reel and solid aluminium frame.

Accuracy within 3cm. Interface probes features a field replaceable 5/8" probe.

Features> Extremely durable polypropylene storage

reel with rugged aluminium frame.

> Highly accurate Kynar® coated steel tape marked in engineering or metric units.

> Field replaceable probe is only 5/8" in diameter.

> Stainless Steel conductors for durability.

> Audible and visual alarms activated on reel when the probe contacts product and water.

> Auto shut-off circuit to extend battery life.

> Easily replaceable 9V battery.

> Built in reel hanger for longer tape life.



> A positive air displacement pump designed for hydrocarbon recovery, leachate, and condensate in total fluids applications.

> Intrinsically safe design.

> Large intake and discharge ports.

Ideal for providing representative samples due to the low rpm motor and user controlled flow rates. The Fultz Pump is of low maintenance making it ideal for both remote field work and long term monitoring projects.

> For 50mm or larger monitoring wells.

> Operating temperature between 0–40˚C.

> No need for ‘cool down’ period to prevent the motor from overheating as long as the pump is immersed in water.

Designed for single and multi-stage pressure or vacuum pumping liquids. Ideally suited for field sample removal from shallow wells and all surface water sources or for laboratory use.

> Exceptional field durability.

> Operate from 60–600rpm.

> Up to 1l/min delivery rate.

> Two pumping stations available, which can be piggy backed for multi-station pumping.

> Operates to a depth of 8.23m.

> Variable speed control.

> AC, DC or an AC/DC combination available.

> Reversible flow feature for back-flushing.

> Disposable and dedicated tubing means controlled costs and no decontamination issues.

The ultra reliable mini-compressor inside the Geocontrol PRO allows you to sample from depths to 30m!

> Built in high performance air compressor, allowing you to sample to depths of 30m.

> Controls all portable and dedicated bladder pumps, and most air-lift pumps on the market today.

> Operates from 12V DC car battery, with an option for a portable rechargeable battery.

> Bladder pumps designed with input from field technicians.

> Bladders are constructed of 316 stainless steel with quick change bladder configuration.

> Utilises advance electronic logic to control both high rate purging and gentle low flow sampling.

> Operates on 240V AC or 12V DC.

> High pressure operation to 300psi.

> Adjustable fill rate control.

> Built in pressure regulator and gauge.

> Operates to depth of 210.3m.

> Bladder pumps designed with input from field technicians.

> Bladders are constructed of 316 stainless steel with quick change bladder configuration.

Geotech Peristaltic Pump Designed for Single and Multi-Stage Pressure or Pumping of Liquids

Geotech Geocontrol PRO & Bladder Pumps Compact and Portable Mini-Compressor

Geotech Geocontroller 2 & Bladder PumpsMicroprocessor Controlled for Use in High Rate Purging and Gentle Low Flow Sampling

PUMPS & CONTROLLERS

Together with the United States Geological Survey, Geotech designed the original bladder pump for groundwater quality and pollution monitoring and has further developed what is known today as the Geotech family of Bladder Pumps.

> Proprietary resin grade virgin PTFE bladder for long life.

> Constructed of #316 stainless steel for durability.

> Can pump to the surface from as deep as 304.8m.

> Dedicated or portable turnkey systems.

> Optional Drop-Tube assembly available for sampling from greater depths.

Geotech Dedicated Bladder Pumps Designed for Wells as Small as 0.75"

Geotech 1.66 and 4.0 Auto Reclaimers Designed to Pump Floating Hydrocarbons, Leachate and Condensate in Total Fluids Applications

Geotech 1.66 and 3.50 Reclaimers Designed to Withstand Aggressive Down-Well Environments and Highly Corrosive Fluids

Fultz Electric Submersible Pump Series Ideal for Remote Field Work and Long Term Monitoring

ELECTRIC SUBMERSIBLE PUMPS

The 1.66 and 4.0 (AR4) Auto-Reclaimers are operated automatically, and needs no controller.

> Intrinsically safe design.

> For 2” or larger (1.66) or 4” or larger (AR4) wells.

> Ability to pump from 76.2 meters.

> Production rates up to 3 gpm (1.66) or particles up to 1/8" diameter (AR4).

> Stainless steel housing and corrosive resistant materials for less maintenance.

> Consistently pumps fluids as light as 0.70 SpG reliably (AR4).

> New adjustment-free valve mechanism – no magnets (AR4).

> Improved float design for maximum buoyancy and chemical compatibility (AR4).

> Optimal working pressures as low as 1 psi above head pressure (AR4).

> Manufactured from corrosive resistant materials.

> 1.66 Reclaimer: – 2" (5cm) or larger diameter wells. – Ability to pump from 500' (152m). – Flow rates up to 3 GPM (11.4 LPM).

> 3.50 Reclaimer: – 4" (10cm) or larger diameter wells. – Ability to pump from 500' (152m). – Flow rates up to 4 GPM (15 LPM).



MP15 Compressed Gas System Portable and Easy to Use

Compressed Gas Systems For Use with Groundwater Monitoring Controllers

Petrol Compressor The Best in Portable Petrol Compressors Well Environments

12V Compressor Alternative Option to Using CO2 Gas

> The CO2 cylinder provides hours of sampling power.

> Combines advanced low flow control with the quiet power of a compressed gas source, for the ultimate in portability and ease of use in sampling ground water with bladder pumps.

> Hired with the QED MP15 controller.

> Includes the convenience of a back pack for remote locations.

The CO2 cylinder provides hours of sampling power. The Compressed Gas System combines the advance low flow control with the quiet power of a compressed gas source for the ultimate in portability and ease of use in sampling groundwater with bladder pumps.

> Use with QED or Geotech controllers.

> Easy to operate.

> Portable.

The Direct Drive 5.5HP Compressor

Petrol Honda™ Engine Series is the very best serious portable petrol powered air compressor available.

> Fitted with the exclusive Renegade patented air solenoid system.

> 5.5HP Honda™ petrol engine.

> Alternative to gas compressors for your low flow systems.

Simply hook the alligator clips to your car battery and begin sampling. The 12V compressor connects to any 12V Battery (12V batteries are available on request).

> Use with QED or Geotech controllers.

> Features a safety shield between the motor and carry handle to protect both the user and the instrument.

Flow Cells Flow Cells Available for a Wide Range of Instruments

Compressed Gas System Trolley For Improved Gas Cylinder Portability

> Flow cells are available for TPS 90FLMV, YSI ProPlus, WQC-24.

> Can be hired separately or with the TPS 90FLMV Combination Meter.

> For use with low flow systems.

> Available for sale and rental.

SYSTEMS ACCESSORIES

Designed by Proactive™ for well purging and sampling, all the pumps in the Waterra 12 Volt Pump Series can greatly speed up the process of purging and sampling monitoring wells, especially if dedicated installations are used.

> Pumps come complete and ready to use.

> Simply attach to a 12 volt battery.

> Available in Standard Performance, High Performance, Stainless Steel and Narrow Diameter.

Waterra 12 Volt Pumps Designed for Well Purging and Sample Procedures

LEVEL LOGGERS

AquaVISION Colloidal Borescope Real-Time Measurements of Groundwater Velocity, Direction and Particle Size.

GEOPhYSICAL EQUIPMENT

AquaVISION’s Colloidal Borescope System was developed by a team of research scientists to accurately determine groundwater velocity, direction and particle size in real time. Current down hole technologies only allow for a few groundwater flow measurements per day. The AquaVISION Colloidal Borescope System yields thousands of data points per minute for hours of statistically assured data.

> Assessing groundwater capture zones.

> Accurately calibrating groundwater models.

> Can observe flow at the pore scale which measures velocities ranging from 0 to 25mm/sec.

> Evaluate “cross-hole” hydraulic connections.

Great almost anywhere you need to measure level and temperature, the LT Submersible Level/Temperature Smart Sensor with Data Logging is perfect for applications including pump and slug tests, stormwater runoff monitoring, well, tank and tidal levels, river, wetland monitoring, resource administration and steam and reservoir gauging.

> Measures and records pressure/level, temperature and time.

> Low power – field replaceable AA batteries.

> Modbus® RTU (RS485) and SDI-12 interface for greater flexibility.

> Thermally compensated – great where water temperatures vary such as in streams or in industrial tank applications.

> ±0.1% FSO typical accuracy.

> Small diameter — 0.75” (1.9 cm).

> 520,000 record non-volatile memory — no data loss in the event of a power failure.

> Wireless connectivity — radios and/or cellular.

> Barometric compensation utility for use with absolute sensors.

> Free, easy to use software.

Air-Met Scientific also stock a range of other INW Smart Sensors (available in cable and cable-less versions) for the following parameters.

> Conductivity.

> Dissolved Oxygen.

> PH/ORP/ISE.

> Turbidity.

> Temperature.

Aquistar LT Submersible Level/Temperature Smart Sensor with Data Logging Ideal for Measuring Level and Temperature in Lakes, Tanks and Wells



HydraSleeve™ makes groundwater sampling a simple, three-step operation that is more effective than bailers, passive diffusion bags, portable or dedicated pumps.

> For use in groundwater sampling.

> Easy to operate.

> Effective – sample for all compounds.

> Inexpensive.

> Collects samples in less than 15 minutes.

Provides the mechanical actuation for pumping with inertial pumps to depths of over 60m, in a fully portable, single operator power unit.

At 13kg, the PowerPack PP1 provides outstanding pumping performance. The PP1 is powerful enough to lift water from over 60m depth using the Standard Flow

System, and is so compact that it fits onto a back-pack frame.

> Suitable for use with standard flow, high flow and low flow inertial pumps.

> Includes backpack frame for portability.

> Petrol powered Honda™ GX25 25cc mini 4-stroke OHC engine.

> Reduces fatigue when purging large volumes.

The most powerful pump actuator manufactured by Waterra. Powered by a Honda™ GX100, 3 horsepower, 4 stroke, petrol motor, this actuator generates a 6" stroke and can operate both the Standard Flow System and High Flow System to their maximum effective depths.

> For inertial pumps.

> Fully adjustable.

> Monitors well to depths of up to 91.44m.

> Powered by a Honda™ GX100, 3 HP, 4-stroke petrol motor.

Waterra locking well caps are designed for securing wells against unnecessary intrusion.

> Waterra well caps are available for 2" and 4" monitoring wells.

> Chemical and temperature resistant properties.

> Tethering attachment at base for a variety of instruments.

> Wing nut design with recessed grip allows easy manipulation.

HydraSleeve™ NO Purge Sampler Making Groundwater Sampling Simple

Well Caps Designed for Securing Wells Against Unnecessary Intrusion

Waterra PowerPack-PP1 Fully Portable Single Operator Power Unit

Waterra Power Pump-2 Waterra’s Most Powerful Pump Actuator

SAMPLERS AND wELL CAPS CONSUMABLES

ACTUATION PUMPS

The Air-Met Field Cal Rig is ideal to assist in the calibration of multiparameters in the field with the ability to hold up to 8 solutions.

> Available in weighted and non weighted.

> Includes an improved top so they fill and empty faster than any other bailer on the market.

> Disposable bailers eliminate field cleaning and cross contamination.

Air-Met Scientific stocks a wide range of calibration & decontamination solutions. Call Air-Met Scientific today for a more comprehensive list.

Calibration and Decontamination Solutions include:

> Oxygen Probe Service Kit Sodium Sulphate Zero DO (50g).

> Turbidity Standard (500ml).

> Decontamination solutions are available in 1l, 5l and 20l high density

polyethylene containers.

> pH4 and pH7 (500ml).

> ORP Solution A & B (250ml).

> Conductivity Standard (500ml).

> Salinity Standard (500ml).

> For use with groundwater sampling.

> Low and high density polyethylene tubing available.

> Tubing is supplied bagged in plastic to ensure no cross contamination.

Field Cal Rig

Bailers & Bailer Twine

Calibration & Decontamination Solutions

> Easy to install and operate.

> Air-Met has a range of replacement disposable bladders to suit Geotech and QED bladder pumps.

> Replacement bladders are sold in packs of 10 or 12.

> The Standard Flow Foot Valves System is best used in wells of 1" to 2" inside diameter.

> This system is suitable for a variety of sampling environments.

Foot Valves Disposable Bladders

Polyethylene Disposable Tubing

The Waterra Surge Block is an excellent well development tool. It simply press fits over the body of the Standard Flow or High Flow foot valve (D-25 or D-32).

> Waterra surge block for D25 50mm bore.

> Waterra surge block for D32 50mm bore.

Surge Blocks

> Combines a steritop filter unit with a receiver flask for processing and storing volumes from 150ml to 1000ml.

> No tip and easy grip flask design.

> Vacuum-drive filtration.

> Ideal for use in laminar flow hoods.

0.45 micron disposable in-line 600m2 effective filtration area.

This range of disposable syringes is the simple way to sample for metals.

> Available as Luer lock or Catheter Tip Syringes.

> No field decon required.

Syringes Stericup Filter Units

In-Line Filters 0.45 Microns

> Used to reduce incidence of moisture entering the sensor and the lamp of the PID.

> 0.45μm pore size RAE water trap filters are available at Air-Met Scientific as singles or in packs of 10.

PID Filters

For use with Polyethylene Disposable Tubing.

Tubing A-Frame

> Disposable textured non-slip, nitrile powder free gloves are latex free.

> Available in Ni-Tek or Kimberly Clark.

> Hypoallergenic.

> Available in S, M, L and XL.

Nitrile Powder Free Gloves

> The Standard Flow Foot Valves System is best used in wells of 1" to 2" inside diameter.

> This system is suitable for a variety of sampling environments.

Silicon Disposable Tubing



Designed to recover hydrocarbons with specific gravity <1.0 and viscosities between 50–400 SSU.

> Requires no power.

> Screens available in three mesh sizes.

FREE PhASE REMEDIATION EQUIPMENT

A high efficiency product recovery system capable of recovering Light Non-Aqueous Phase Liquids (LNAPL) from water.

> Intrinsically safe, explosion-proof design.

> Recovers hydrocarbons to a sheen.

> Equipped with a visual alarm.

> 2L reservoir.

> Body and hoses made of polyethylene. Check valves made of nylon.

Designed to recover hydrocarbons from 2" or 4" and larger wells.

> Heavy duty #304 stainless steel screen assembly.

> Teflon coated stainless steel hanger.

> Ballast weight for optimal submergence.

> Portable and electrically safe for use in hazardous locations.

> Up to 4gpm at 65psi product recovery rate.

Designed to recover a wide range of floating hydrocarbons, the small diameter filter scavenger is ideal for wells with static fluid levels down to 46.1m deep.

> Designed to fit into a 4" (10cm) well or larger.

> Recovery rate: 0.5gpm.

A hydrogen recovery system that is available in both AC and Solar.

> Compact and easy to install.

> Extracts fluids from depths of 54.86m.

> Recovers viscous hydrocarbons.

A passive skimmer with a floating intake that separates and recovers light hydrocarbons from groundwater.

> Available in 2" PRC or 4" PRC.

> Quick fill time – about 15 minutes with ample product.

> Protected easy release drain valve.

ORS Large Diameter Filter Scavenger™ For LNAPL Recovery from Water

ORS Filter Bucket™ An Independently Floating Passive Hydrocarbon Skimmer

Geotech GeoSorb Designed for Hydrocarbon Recovery

ORS Large Diameter Dangle Scavenger Effectively Separates Hydrocarbons from Water

ORS Small Diameter Filter Scavenger Designed to Recover Floating Hydrocarbons

Geotech Sipper Hydrogen Recovery System

ORS Gravity Feed Filter Scavenger Designed for Hydrocarbon Recovery

Keck PRC Passive Skimmer For Light Hydrocarbon Recovery

When used in conjunction with Geotech or other vendor supplied equipment, ORS Control Probes can aid in facilitating operation and process control in a variety of environmental remediation equipment applications.

> Features intrinsically safe voltage design.*

> Stainless steel shaft.

> Float material designed for use in most hydrocarbon/water applications.

> Available in NO/NC options.

* Intrinsically safe applications require customer supplied intrinsically safe barriers.

A specially designed microprocessor based industrial control panel for operation of a wide variety of industrial equipment.

> Weatherproof NEMA 4X(IP66) enclosure.

> A bright 16x2 character vacuum fluorescent display.

> Large hand/off/auto switch controls for direct control over individual system devices.

> A four button keypad is used to change menu and status display.

A patented in-situ remediation system. Unlike other commercially marketed in-well air strippers or circulation type systems, the Plume Eater’s process is unique. When pulling in contaminated groundwater, it strips away the VOCs while oxygenating the treated water before it is re-introduced deep into the formation.

> Accelerates bio-remediation.

> Soils are flushed with oxygenated groundwater.

> Works on a variety of soil types.

LO-Profile Air Strippers. The ORS LO-PRO™ models II and III are highly efficient water treatment systems that can remove up to 99.99% of many volatile organic compounds (VOCs) from water.

> Patented multi-stage counterflow aeration provides up to 99.99% removal efficiency.

> Highly effective on BTEX, MTBE and Radon.

> Very easy to install and maintain.

> Lightweight modular polyethylene trays allow the addition or subtraction of trays to meet engineered treatment requirements.

TOTAL FLUID & DISSOLVED PhASE GROUNDwATER REMEDIATION

ORS LO-PRO™ Designed to Remove VOCs from Water

Geotech Plume Eater In-Situ Remediation System

ORS Control Probes Design for Use in Most Hydrocarbon/Water Applications

Geotech ECM (Environmental Control Module) Designed Specifically for Ease of Use and Installation



Commonly used for obtaining disturbed samples at or near the surface and for boring to depths where samples may be obtained with a soil sampler or soil core sampler.

AMS augers are available in stainless steel for EPA testing or carbon steel bits with stainless steel cylinders for general soil sampling and augering.

Perfect for augering shallow depths, AMS soil augers can also auger deeper depths and are generally limited by only the time and muscle of the user.

> Most models available with a threaded or Quick Connect connection.

> A rounded bail for added torque resistance.

> Stainless steel cylinder for easier decontamination.

> Specially formed bits that dig and cut through the soil at the same time for easy penetration.

> Cut hole up to 1/4" larger than the cylinder to minimize drag.

> Heads available: – Regular/Soil. – Clay/Mud. – Sand.

AMS Soil Gas SamplingAMS has been a leader in soil gas sampling technologies since the development of the ‘original’ AMS gas vapour probe.

Since AMS Inc., was founded in 1942, AMS products have been used by individuals, businesses, non-profits, governments and universities throughout the world for a wide variety of sampling purposes.

AMS equipment is primarily used for environmental and geotechnical sampling and monitoring, as well as for remediation activities. They also provide simple solutions for a variety of other fields, including: agriculture, construction, golf & turf, mining, pest control, etc.

AMS, Inc., manufactures hand augers, soil probes, core samplers, sludge and sediment samplers, gas vapour probes, and since 1994, AMS PowerProbes direct-push drill rigs. AMS PowerProbes can be mounted on pick-up trucks, tracks, or trailers, and have gained widespread acceptance due to their versatility, relatively low cost, and ease of mobility. They are designed to be used for: soil, soil gas, and groundwater sampling and testing; remediation investigations; geophysical and geotechnical tests; installing monitoring wells; and most models can be fitted with hollowstem augering capability.

For more information about the complete range of AMS Inc Soil Sampling Equipment, please contact Air-Met Scientific for a product catalogue.

ImagesAbove: Soil gas sample being collected using an AMS GVP rod with a regular 5/8" threaded slide hammer.

Top Right: Collecting a soil gas sample using an AMS GVP kit.

Bottom Right: Removing gas vapour probe rod using AMS removal jack.

AMS Soil Augers

SOIL GAS SAMPLING

Original Gas Vapour Probe For Easy Collection of Soil Gas Samples at Shallow Depths

> Samples soils to depths of 3.66m (depending on soil conditions).

> Material: stainless steel.

> Includes: GVP base section, liner rod, GVP hamper adapter, 3' GVP extension with liner rod, 10" cross handle, GVP barbed adapter.

AMS Dedicated Gas Vapour TipInstall as a Permanent Sample Point or Leave In Ground as a Disposable Point

Sludge & Sediment Samplers Specifically Designed to Retain Non-Cohesive Sludge Samples

> Used for detecting hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination and hazardous waste sites.

> Unique design and umbrella ensure an easy passage for gas entering the collection system.

> Material: 300 series stainless steel.Includes: Dedicated GVP top and fluoropolymer umbrella.

> Core and auger tips have been fitted with valves for retention of high quality soil core samples.

> Versatile and easy to use for collection of either cored or augered samples of non-cohesive saturated materials in a liner.

AMS 6" Gas Vapour Implant Drive Kit Easy and Simple to Use

Used for long-term soil gas monitoring, groundwater sampling, vapour extraction monitoring, and as a pressure measurement point in vacuum testing.

> Materials: Steel implant drive end, stainless steel gas vapour implant, stainless steel dummy tip.

> Includes: 6" gas vapour implant, 6" GVP implant drive end, and dedicated dummy tip.

AMS Retract-A-TipDesigned to be Driven into the Soil and Opened for Sample Extraction

Split Soil Core Samplers Designed to Collect Undisturbed Soil Core Samples

> A survey tool for collection of discrete soil vapour samples below the ground surface, usually at discrete depths.

> Materials: 300 series stainless steel (sampler), 400 series stainless steel (tip).

> Includes: Barbed insert, outer sleeve, inner nut, bottom nut, vapour inlet shaft, and screen.

> Vertically split cylinder (cup set) allows easy extraction of the soil core from the liner and prevents breakage of the core.

> Suitable for EPA III or IV analysis when used with lining.

> Used without a liner to collect undisturbed cores.

> Used with a liner for collection of undisturbed sealed cores.

www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067 www.airmet.com.au Sales 1800 000 744 Rental 1300 137 067

Reliable and Cost Effective Remote Environmental Monitoring Solutions.

As environmental monitoring is becoming more important, Air-Met has developed monitoring station solutions to provide end users with 24 hour access to sampling data from the comfort of your office or mobile device. Utilising the science and technology of automated measurement and transmission of data from remote locations, Air-Met offers clients with remote site and web based monitoring data requirement; an affordable and practical solution.

Applications for telemetry solutions include the following

> Water quality monitoring.

> Water level monitoring.

> Dust level monitoring,

> Sound and noise monitoring.

> Weather monitoring.

> Gas monitoring.

Data Management Features

> Permits for live monitoring of site.

> Login access for clients individual sites.

> Monitors trends, tables, data and captures live reading.

> Data collected and recorded in Air-Met’s database.

> SMS and email warnings provided when thresholds are exceeded.

> Graphs and data can be exported.

> Can be viewed on desktops, laptops and smartphone browsers.

Data management solutions that allow you to gain instant access into your monitoring programs.

Data Management Solutions


Benefits of renting with Air-Met Scientific

> No large up front capital outlay. Renting is a tax deductible operating expense.

> On-site training in metropolitan areas for your staff at no additional charge.

> Complete instrument management program available for long term contract hires.

> All instruments are calibrated and serviced before dispatched.

> Air-Met will set the instrument up to your specific project needs prior to being dispatched.

> No hire charge for time in transit – we allow for a full 24 hours from off hire to the return of equipment for customer convenience.

> Instruments are fully serviced.

“ We believe in the quality and the capabilities of our equipment which is why we guarantee our rental equipment – if it doesn’t do the job you expect it to, it’s free – no strings attached.”

Air-Met Rental equipment can be configured to any alarm or data configuration on customer request at no extra charge.

Servicing the Occupational Health, Safety and Environmental market, Air-Met Rental has an extensive range of instruments for both short term and long term requirements. With 8 offices, Air-Met Rental own, manage and maintain over 14,000 pieces of equipment dedicated just for rental. Each year this equipment is rented for use in over 6,000 projects nationwide.

Air-Met Rental – For Short Term and Long Term hire

Air-Met Scientific

Product CatalogueSales | Service | Rental

OCCUPATIONAL HEALTH, SAFETY& ENVIRONMENTAL MONITORINGEQUIPMENT SPECIALISTS

Sales 1800 000 744Rental 1300 137 067www.airmet.com.au PC 11/2014

Date post:	11-Feb-2017
Category:	Documents
Upload:	buidiep
View:	228 times
Download:	4 times

Air-Met Product Catalogue 2014

Documents