GLOBALPUMPING SOLUTIONS
Air Operated Double Diaphragm Pumps
www.blagdonpump.com
Reduce
down-time with
our immediate
availability of
spares for Blagdon
and competitors.
Confidence
of delivery
99.1%on-time
delivery
Flexible design
and production
meets our
customer’s
exacting
standards.
High quality
products with
certification to
EHEDG, ATEX, ISO.
Worldwide
technical
representation for
customer’s
support.
2 www.blagdonpump.com
Our Background
Our Credentials
Our Mission
Our Website
Blagdon Pump was originally founded in the early 1950's in the North
East of England as a specialist pump manufacturer. We commenced
the production of AIR OPERATED DOUBLE DIAPHRAGM PUMPS in
1979. We soon became market leaders in their production resulting in
the US based multi-national IDEX CORPORATION acquiring Blagdon
Pump to strengthen their position in the double diaphragm market in
1997.
We are world-wide market leaders in providing high quality AIR
OPERATED DOUBLE DIAPHRAGM PUMPS. We comply with all
British Standards BS EN ISO 9001:2000 Quality Management System
and BS EN ISO 14001:2004 Environmental Management System.
We comply with the letter and spirit of current OH & S legislation and
other requirements as well as take all necessary measures to protect
the Environment.
We are INVESTOR IN PEOPLE accredited as we continuously strive
to improve our products and standards for our customers.
Is to provide all our customers with an exceptional product and
service. To be respected by customers and competitors alike,
setting standards by which others will be measured.
We are committed to offering you a dedicated sales and after sales
service which is second to none. Now you can keep up to date with
developments as they happen with our NEW WEBSITE and
QUARTERLY NEWSLETTER. (See inside back pages for more
details)
There is a lot happening at Blagdon Pump.
We aim to make dealing with us a more
efficient experience. A service you can rely
on for all your pump requirements
We look forward to dealing with you.
General Manager
Blagdon – The Company
Continuous improvement methodologies are at the heart of the Blagdon culture and used every day in every process within the business.
Durham University has for the past 10 years used our Washington factory as one of its preferred sites for the purpose of training in manufacturing techniques in a full production setting.
John Garside, Teaching Fellow and Industrial Tutor at Durham University said:
“I have had many a student and project activities with Blagdon Pump since about 1996. I now feel priviliged to visit myself and recommend others to visit Blagdon Pump, and hear and see what I call the 'Blagdon Story'.I believe it is truly special; it covers so many aspects of excellent manufacturing and business practices”.
Neil Radbourne, Best Practice Manager, MAS (Manufacturing Advisory Service) said:
“Blagdon's unique use of continuous improvement activity together with lean and six sigma tools provides a stimulating combination with excellent examples for visiting managers, whether from large or small organisations”.
Current practices include:
! Six Sigma! Kaizen! Value Stream Mapping! Supply Chain Management! 5S Housekeeping! Lean Thinking! Kanban
Anyone wishing to experience how Blagdon Pump manages continuous improvement can arrange a visit by calling +44 (0) 191 417 7475.
Air operated double diaphragm pumps have long been recognised as the "work horse" of industry for handling "difficult" liquids at relatively low pressures and flows. The range of applications is virtually limitless. Blagdon AODD pumps come in many sizes and choices of materials of construction. Almost every type of liquid from highly corrosive acids through high viscosity paints and adhesives, to food and drink products can be pumped.
3
Choice of models to suit all applications
The Products
Download individual specificationsheets from our website.
Blagdon 1/2 ", 1" and 2" EHEDG Approved Hygienic Pumps in Polished 316L Stainless Steel
Blagdon Non-metallic B10 3/8” available in Polypropylene and Kynar (PVDF)
Blagdon 1" and 2" High Pressure 2:1 Pumps availablein Aluminium, Stainless Steel
BLAGDON 1/2”, 1”, 1 1/2”, 2” FDA Compliant Pumps inPolished Steel plus assorted standard fluid fittings
Blagdon Non-metallic Pumps available inPolypropylene and Kynar (PVDF) from 1/4" to 2”
Blagdon Metallic Pumps available in Aluminium,Cast Iron, Stainless Steel from 1/4" to 3”
How the double diaphragm system works
The Blagdon pump is basically two pumps in one. Chambers A&B are alternatively filled and emptied by drawing fluid in through a common inlet (C) and out through a common outlet (D). The diaphragms in each chamber are linked by a common shaft so that they move backwards and forwards in unison. Compressed air is directed by the air valve (E) alternatively behind each diaphragm to power discharge strokes. Pump speed and therefore fluid flowrate can be infinitely controlled by increasing or decreasing air pressure and / or volume.
Operation sequenceThe red arrows show the pump cycle. Fluid is being drawn into inlet (C) by the suction stroke of the diaphragm in chamber B, which opens the ball valve (2) to allow liquid to enter the chamber. Ball valve (4) is closed by the diaphragm suction.
In chamber (A) air has been applied to the rear of the diaphragm to force out the liquid in the chamber through the ball valve (3) to the liquid outlet (D). This discharge stroke closes ball valve (1) to prevent further liquid entering the chamber. This cycle is repeated to provide a continuous flow to outlet D.
Standard Blagdon pumps are 1:1 ratio. Maximum outlet pressure cannot exceed air supply pressure. Blagdon also offer 2:1 ratio high pressure pumps.
Blagdon offer an extensive pump range for handling fluid media safely and cost effectively.We offer low cost ownership, by combining high quality wear parts with low price spares and a vast array of accessories. A flexible modular design of pumps means we can offer short lead times and a high degree of customising opportunities. Our experienced staff can provide instant support for installation, servicing, maintenance or a technical enquiry. We offer a fast spares delivery service, many items being in stock for immediate delivery.
4 www.blagdonpump.com
The benefits you get from a Blagdon Pump
11 key features and benefits of a Blagdon Pump
1. Blagdon pumps can run dry without damage or danger.
2. They are fully submersible.
3. They are designed to operate at low noise levels.
4. They have leak-free air valves that are easily removed for servicing.
5. They can be easily maintained. They can be stripped down quickly without
any specialist tools.
6. They are self-priming to over 6 metres.
7. They are pressure balanced. They stall if discharge is closed and restart
when discharge is opened so avoiding heat build up and wearing of components.
8. They have minimum product agitation.
9 . They have long stroke, slow speed cycling capability for low initial break out.
10. They are portable and compact-can be remotely controlled and fully packaged.
11. Safe in hazardous areas, no sparking, air-driven.
A full list of chemicals and
recommended elastomers is
available on request, or our sales
office can advise on the best pump
and materials for specific media.
Typical range of products you can pump.
Clay slip, titanium dioxide,
mill scale.
All mineral and organic acids.
Solvent and water based.
Chemicals.
Acids.
Cement, mortar.
Slip, glazes, clay.
Creams, emulsions,
detergents.
Mud, grout, lubricants.
Soft drinks, spirits, beer, wine,
milk.
Suspensions of gun
powder, explosives, etc.
Liquid and semi-solid foods,
flavourings.
Printing inks, dryers, dyes,
sizes and solvents.
Petrol, diesel, hydraulic and cutting
oils, lube oils, animal and vegetable oils
and greases.
Emulsions, latexes, pigments,
solvents, resins, thinners.
Liquids, creams
and compounds.
Aggressive acids, salts, sludge
and effluents.
Paper, wood, sizes, bleaches.
Natural and synthetics, water
and solvent based, monomeric and
polymeric plastics.
Gum, latex.
Sewage, effluents,
coal and lime slurry.
Aromatic and aliphatics,
ketones, aldehydes, esters and chlorinated
hydrocarbons, de-icing fluids.
Creosote,
turpentine, copper napthenate.
All types.
! ABRASIVES:
! ACIDS:
! ADHESIVE:
! ALCOHOLS:
! CAUSTICS:
! CEMENT:
! CERAMICS:
! COSMETICS:
! DRILLING:
! DRINKS:
! EXPLOSIVES:
! FOODS:
! INKS & DYES:
! OILS:
! PAINT:
! PHARMACEUTICALS:
! PLATING:
! PULPS:
! RESINS:
! RUBBER:
! SLUDGE & WASTE:
! SOLVENTS:
! TIMBER PRESERVATIVES:
! WATER:
5
The media Blagdon Pump can handle
SAFE FOR HAZARDOUS AREASSAFE FOR HAZARDOUS AREASPERMANENT OR PORTABLE OPTIONSPERMANENT OR PORTABLE OPTIONS
SUBMERGED OPERATIONSUBMERGED OPERATION
SELF PRIMINGSELF PRIMING FILLING/INJECTION/DOSINGFILLING/INJECTION/DOSING
HOPPER TYPE FOR HIGH VISCOSITYHOPPER TYPE FOR HIGH VISCOSITY
Pump DutiesBlagdon pumps can be installed in any of the models illustrated to perform the following duties: Liquid Transfer, Slurry Handling, Filter Feeding, Circulation, De-watering, Low Pressure Spray Supply, Tank/Sump/Barrel/Drum Filling and emptying, Batching/Mixing/Metering/Dosing, and Chemical Injection etc.
www.blagdonpump.com
Blagdon - Portfolio Information
Diaphragm & Ball Valve Options - Uses, Temperature Limits & Specific Gravity
Aggressive chemicals and most solvents. High temperature uses
N/A
Caustic solutions and dilute acids. Excellent abrasion resistance
Aggressive chemicals and solvents but with low abrasion resistance
Excellent abrasion resistance, dirty water, oils and hydrocarbons
High mechanical strength. Suitable with most oils, solvents and hydrocarbons
Excellent abrasion resistance. Widely used in the ceramics industry on dirty water, clays, grout etc
General purpose for use on water, most hydrocarbons and mild chemicals
Caustic solutions and dilute acids. Poor on oils and solvents
General purpose for use on water, most hydrocarbons and mild chemicals
Main Properties and Uses Min Optimum
Operating Temperatures
DiaphragmPump Model/Size/Material
-18F-28C
-11F-24C
50 to 140F10 to 60C
50 to 140F10 to 60C
50 to 140F10 to 60C
50 to 130F10 to 54C
50 to 130F10 to 54C
50 to 130F10 to 54C
50 to 212F10 to 100C
50 to 140F10 to 60C
-10F-23C
-4F-20C
-40F-40C
-40F-40C
32F0C
-10F-23C
N/A N/A
0F-18C
Elastomer
Buna-N
EPDM
Geolast
Neoprene
Polyester
Polyurethane
PTFE
Santoprene
Stainless Steel
Viton
B06 - 1/4" Stainless Steel
B25 - 1” Aluminium
B40 - 1 1/2” Stainless Steel
X75 - 3” Cast Iron
B15 - 1/2” Polypropylene
B50 - 2” PVDF
B25 - 1” Full Flow 2:1
B50 - 2” Stainless Steel
B15 - 1/2” Aluminium
Me
tallic
Pu
mp
sN
on
-Me
tallic
Pu
mp
sH
ygie
nic
Pu
mps
FD
AP
um
ps
Hig
hP
ress
ure
Pu
mps
PT
FE
P
um
ps
B40 - 1 1/2” Aluminium
B50 - 2” Stainless Steel
B06 - 1/4" PVDF
B25 - 1” PVDF
B50 - 2” Hygienic
B25 - 1” Stainless Steel
B25 - 1” Conductive PTFE
B25 - 1” Cast Iron
B50 - 2” Aluminium
X75 - 3” Stainless Steel
B15 - 1/2” PVDF
B15 - 1/2” Hygienic
B50 - 2” Full Flow 2:1
B15 - 1/2” Conductive PTFE
B15 - 1/2” Stainless Steel
B40 - 1 1/2” Cast Iron
X75 - 3” Aluminium
B10 - 3/8” Polypropylene
B50 - 2” Polypropylene
B25 - 1” Standard 2:1
B40 - 1 1/2” Stainless Steel
B25 - 1” Stainless Steel
B50 - 2” Cast Iron
B06 - 1/4" Polypropylene
B25 - 1” Polypropylene
B25 - 1” Hygienic
B15 - 1/2” Stainless Steel
B15 - 1/2” Virgin PTFE
75 to 212F24 to 100C
!!!!!!!!!!!!!!
!!!!!!
!!!
!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!
!
!!!!!!!!!!!!
!!
!!!!!!
!!!
!!!!!!!!!!!!!!!
!!!!!!
!!!
B25 - 1” Virgin PTFE
Fluid Contact Materials Air Chamber Materials
!
!!
!
!
!
!
!
!
!!!
!
!
!
!
!
!
!
!
!
!!!
!
!!
!
!
!
!
!
!
!!!!!!!
!!!
!!!!!!!!!!!!!!
!!!
!!
!!
!!
!!
!
!!!
!!!!
!!!
!
!
!
!
!
!!!!!!
!!
!!!!!!
!!!!!!
!
Co
nd
uct
ive
PT
FE
Virg
in P
TF
E
Alu
min
ium
Ca
st Iro
n
PV
DF
Po
lyp
rop
yle
ne
Sta
inle
ss S
tee
l
Po
lish
ed
Sta
inle
ss
Alu
min
ium
Ca
st Iro
n
Nic
kel P
late
d A
lum
iniu
m
Po
lyp
rop
yle
ne
Sta
inle
ss S
tee
l
Ep
oxy
Co
ate
d A
lum
iniu
m
Ep
oxy
Co
ate
d S
tain
less
Ste
el
Co
nd
uct
ive
PT
FE
Bu
na
-N
EP
DM
(In
c. F
oo
d G
rad
e)
Ge
ola
st
Po
lye
ste
r (H
yte
l)
Ne
op
ren
e
Viscosity Guide This table is a guide only – cps = centipoise
SA
E 7
0 O
il1
76
40
cp
s
Wa
ter
1 c
ps
Tom
ato
Juic
e17
6 cp
s
SA
E 3
0 O
il3
52
cp
s
Gly
ce
rin
e8
80
cp
s
SA
E 5
0 O
il1
56
1 c
ps
Glu
e3
00
0 c
ps
May
on
nai
se50
00 c
ps
Mo
lass
es B
8640
cp
s
So
ur
Cre
am15
200
cps
!!!!!!!!!!!!!!!!!
!!!!!!
!!!
!!!!!!!!!!!!!!
!!!!!!
!!!
!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!
!!!!!!
!!!
!!!!!!!!!!!!
!!
!!!!!!!!!!!!!!!!
!!!!!!!
!!!
!!
!!
!!!
!!!!!!!!!!!!!!!!!!!!!!!!
!!!
!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!
!!!
!!!!!!!!!!!!
!!!!
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!
!!!!
!!!!!!
!!!
!!!!
Ball Valve S.G.
Materials Ball Valve Materials Max. Flow Max. Op PressureAir Inlet Max. SolidSize (mm)
Fluid Connections
Max Standard Weighted
B50 - 2” Pumps Maximum 12000
X75 - 3” Pumps Maximum 25000
B06 - 1/4” Pumps
B10 - 3/8” Pumps
Maximum 2000
1 200 500 1000 2000 4000 10000 15000
Maximum 2000
B40 - 1 1/2” Pumps Maximum 12000
B15 - 1/2” Pumps Maximum 5000
B25 - 1” Pumps Maximum 5000
7.80 N/AN/A
1.80 3.2
0.98 N/A
N/A N/A
N/A N/A
N/A N/A
1.23 2.64
1.0 N/A
1.23 2.64
1.23 2.64
356F180C
212F100C
356F180C
158F70C
158F70C
212F100C
212F100C
212F100C
176F80C
34
34
11
11
120
76
40
14
80
28
20
114
31
17
120
120
34
34
11
11
6
4
4
202
202
202
120
120
120
76
76
76
40
40
40
14
14
4
154
154
48
48
530
320
180
60
350
125
86
500
136
75
530
530
154
154
48
48
26
16
16
889
889
889
530
530
530
320
320
320
180
180
180
60
60
18
2”
1 1/2”
1”
1/2”
2”
1”
1”
3/8”
1/4”
1/4”
3”
3”
3”
2”
2”
2”
1 1/2”
1 1/2”
1 1/2”
1”
1”
1”
1/2”
1/2”
1/4”
2” 150 RF
2” 150 RF
1” 150 RF
1” 150 RF
1/2” 150 RF
1/2” 150 RF
2”
1”
1”
3/8”
3/8”
1/4”
1/4”
3/4”
3/8”
3/8”
1/4”
3/4”
3/8”
1/4”
3/4”
3/8”
1/4”
3/4”
3/4”
3/8”
3/8”
1/4”
1/4”
1/4”
1/4”
1/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
1/4”
1/4”
1/4”
7
7
7
7
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8
8
8
8
7
5
5
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
8.6
100
100
100
100
125
125
125
125
125
125
125
125
125
125
125
125
116
116
116
116
100
72
72
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
3
3
2
2
6
6
3
2
6
3
3
10
3
2
6
6
3
3
2
2
2
2
2
10
10
10
6
6
6
6
6
6
3
3
3
2
2
2
PT
FE
(O
ne
Pie
ce)
Po
lyu
reth
an
e
Sa
ntr
op
ren
e
PT
FE
Vito
n
Bu
na
-N
EP
DM
(In
c. F
oo
d G
rad
e)
Ne
op
ren
e
Sa
nto
pre
ne
Sta
inle
ss S
tee
l
PT
FE
Vito
n
UK
GP
M
L/M
in
BS
P(F
)
AN
SI F
lan
ge
RJT
(M)
BS
P(F
)
Ba
r
PS
I
1/2” 150 RF
1/2” 150 RF
1” 150 RF
1” 150 RF
An ink pumping and mixing plant at Amcor Packaging in Australia using Blagdon 15 moulded pumps.
Fully automated Rexson ink manufacturing plant. Blagdon 25 metallic pumps are used for mixing and recirculation.
Blagdon 75 pump transferring paint from dispenser toblending vessel.
8 www.blagdonpump.com
The Products – Blagdon Pumps in action
9www.blagdonpump.com
Blagdon 06 moulded pumps being used by DuracoIndustries, Singapore, for chemical injection at a waste treatment plant.
Blagdon 50 pumps feeding a ring main for final blending at a coatings producer.
Part of the filtration process at a major multi-national paint manufacturer where Blagdon 50 pumps are used to supply the fully automated filling line.
This Blagdon 25 metallic pump at Caradon Bathroom is feeding a robotic spray glazing operation.
2 Blagdon pumps at Royal Doulton pottery works. The unit at the rear pumped clay slip for 8 years without change of diaphragm, ball valves or valve seats.
Blagdon 25 moulded Kynar pumps transferring hydroflouric acid.
Blagdon 25 metallic pump at a major chemical plant in Northern England.
TECHNICAL DATA;
NON METALLIC SERIES B06POLYPROPYLENE & PVDF
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 16 ltrs/min
Max. working Pressure: 5 bar
Max. Solid Particle Size: 2 mm.
Air Inlet: 1/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 1.5 m.
Suction Lift (Wet): 4.1 m.
Fluid Inlet/Outlet: 1/4" BSP(F)
Installation: Wall or surface mounted
Accessories Included: Exhaust air Silencer
Polypropylene 1.7 kg.
PVDF 1.9 kg.
240 x 180 x 200 mm.
Simple construction, easy to maintain.Self priming, ideal for emptying containers.Pressures to 5 bar.Flow rates up to 16 litres/minute.Bolted construction for safety.Low break out pressure requirement.Reliable pneumatic air valve system.
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
Example above: B06.PP.BB.TTP refers to B06
model with Polypropylene wetted components, Glass
filled Polypropylene non-wetted components, with PTFE
Diaphragms and Valve Balls and Polypropylene Seats.
MODEL - BO6
WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)
VALVE SEATSP : POLYPROPYLENEK : KYNAR (PVDF)
VALVE BALLST : PTFE
®V : VITONS : 316 STAINLESS STEEL
DIAPHRAGMSE : EPDMH : POLYESTER
®R : SANTOPRENET : PTFE
®V : VITONO : ONE PIECE PTFE
NON-WETTED COMPONENTSP : POLYPROPYRENE (Glass filled)
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
Moulded Non Metallic Series
10
B 06 Air Operated Diaphragm Pump Range
TYPICAL CODE = B06. PP. BB. TTP
Performance curve
www.blagdonpump.com
p(14.
si5 )
0 Bar1.
( 9 i2
ps )
02 ar
. B
s
(4 . )
3 5 p i
4.0 Bar58 psi)
(
A0 ar
PS
5. BIR RES
URE
si
( 2.5)
7 p
10
0 2
0.4
4
0.8
6
1.3
8
1.7
10
2.2
12
2.6
14
3.0
20
20
0
30
40
40
60
80
50
ME
TR
ES
HE
AD
(2 CFM)
33.5 M /hr
32 M /hr AIR CONSUMPTION(1.2 CFM)
(3.5 CFM)
36 M /hr
(5.8 CFM)
310 M /hr
(7.6 CFM)
313 M /hr
16
3.5
18
3.9 UK Gall/min
L/min
PS
I H
EA
D
FE
ET
HE
AD
FLUID FLOW RATE
33
66
98
131
164
3.0
arB
12696
84
154
80.5
138
63
SILENCER
120 (WITH SILENCER FITTED)
17194
107
59 188
BLAGDON LABEL INCLUDING PUMP MODEL & SERIAL NO. FASTENEDTO MANIFOLD
4 MOUNTING HOLES Ø 6.0 IN
POSITION SHOWN
23
11
Simple construction, easy to maintain.Self priming, ideal for emptying containers.High quality investment cast design.Pressures to 8.6 bar.Flow rates up to 18 litres/minute.Bolted construction for safety.Reliable pneumatic air valve system.Constructed from 316L Stainless steel.
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
www.blagdonpump.com
Metallic Series
TECHNICAL DATA;
METALLIC SERIES B06STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 18 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 2 mm.
Air Inlet: 1/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 1.5 m.
Suction Lift (Wet): 4.1 m.
Fluid Inlet/Outlet: 1/4" BSP(F)
Installation: Wall or surface mounted
Accessories Included: Exhaust air Silencer
Stainless Steel 3.7 kg.
240 x 180 x 200 mm.
MODEL - B06: Standard X06: ATEX approved
DESIGN LEVELVALVE SEATSS : 316L STAINLESS STEEL
VALVE BALLST : PTFEV : VITONS : 316 STAINLESS STEEL
DIAPHRAGMSE : EPDMH : POLYESTERR : SANTOPRENET : PTFEV : VITONO : ONE PIECE PTFE
WETTED COMPONENTSS : 316L STAINLESS STEEL
NON-WETTED COMPONENTSS : 316L STAINLESS STEEL
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
TYPICAL CODE = B06. 01. SS. BB. TTS
Performance curve
Air Operated Diaphragm Pump Range B 06
(3.5 CFM)
36 M /hr
30
0
10
20
(psi
14.5 )
1.0 Bar
2
0.4
4
0.7 1.0
( 9 si)2 p
Ba.02r
4(i)
3.5 ps
.0 B r3
a
6
1.4
8
1.8
s p)
(87i
40
50
60
70
90
(2 CFM)
33.5 M /hr
( p )58 si
(101i)
ps
0ar
7B.
5 psi)
(12
32 M /hr AIR CONSUMPTION(1.2 CFM)
L/min
4.0
14
2.5
10
2.2
12
2.9
16
3.3
18
3.7
(7.6 CFM)
313 M /hr
Gall/min
(5.8 CFM)
310 M /hr
PS
I H
EA
D
0
40
20
60
80
100
120
33
0
66
99
131
197
164
230
262
FLUID FLOW RATE
ME
TR
ES
HE
AD
FE
ET
HE
AD
i7 5 ps
( 2. )4. ar B0
5 0 B. ar
6. a0 B
r
80
B6 ar
IP
EURE
8.
AR
RS
S
SILENCER
112
98
123 33
15.5
122 148.5
189 (MANIFOLDS IN–LINE)
94.5
171110
76.5 AIR INLET
4 MOUNTING HOLESØ 6.5
AIR INLET1/4” BSP(F)
FLUID INLET1/4” BSP(F)
FLUID INLET1/4” BSP(F)
Simple construction, easy to maintain.Self priming, ideal for emptying containers.Strong, robust design.Pressures to 8 bar.Flow rates up to 48 litres/minute.Flanged or screwed end connections.Pneumatic air valve, reliable and easy.
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
MOULDED NON METALLICSERIES B15 POLYPROPYLENE & PVDF
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 48 Itrs/min
Max. Working Pressure: 8 bar
Max. Solid Particle Size: 2 mm.
Air Inlet: 1/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 4.6 m.
Suction Lift (Wet): 6.1 m.
Fluid Inlet/Outlet: 1/2" ANSI #150 RF Flanged
Installation: Wall or surface mounted
Accessories Included: Exhaust air Silencer
Polypropylene/Aluminium 5.3kg.
PVDF/Aluminium 7kg.
Polypropylene/Stainless 12kg.
Steel
PVDF/Stainless Steel 13.5kg.
320 x 200 x 340 mm.
MODEL - B15
DESIGN LEVEL
VALVE SEATSB : BUNA-N K : KYNAR (PVDF)E : EPDM V : VITONN : NEOPRENEP : POLYPROPYLENE
VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL
DIAPHRAGMSB : BUNA-N P : POLYPROPYLENEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE
WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)
NON-WETTED COMPONENTST : EPOXY COATED ALUMINIUMW: EPOXY COATED STAINLESS STEEL
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
TYPICAL CODE = B15. 01. PT. BB. TTP
Performance curve
B 15 Air Operated Diaphragm Pump Range
Moulded Non Metallic Series
12 www.blagdonpump.com
B8 ar(11 p
i6
s )
B7 ar(
pi
101.5 s )6 B r a(87
si p
)
5 Bar7p )
( 2.5 si
4 Bar( 8 ps )5 i
3 Bar(43i)
.5 ps
2 Bar2
)( 9 psi
1. Bar R R S
5 AI P E SURE21.7p i)
(s
ME
TR
ES
HE
AD
30
0
10
20
2 4
FLUID FLOWRATE
6 8
60
40
50
70
80
(5.3 CFM)
9 M /hr3
(6.5 CFM)
11 M /hr3 21 M /hr3
(12.4 CFM) (17.6 CFM)
30 M /hr3
FE
ET
HE
AD
99
12 - UK GPM10
0
33
66
197
131
164
230
266
PS
I H
EA
D
42.6
28.4
14.2
0
113.6
99.4
71.0
56.8
85.2
10 20 30 40 50 L/MIN
287 IN–LINE MANIFOLDS
208 304
51
133
260210
77
143.5
9
20
85
170
20
84
MOUNTINGSLOTS
259
155 AIR INLET
AIR EXHAUST1/4” BSP
SUCTION INLET1/2” ANSI
150 FLANGE
DISCHARGEOUTLET
1/2” ANSI150 FLANGE
Simple construction, easy to maintain.Self priming, ideal for emptying containers.Pressures to 8.6 bar.Flow rates up to 54 litres/minute.Bolted construction for greater integrity.Reliable pneumatic air valve design.Portable.
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
METALLIC SERIES B15ALUMINIUM
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 60 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 2 mm.
Air Inlet: 1/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 4.6 m.
Suction Lift (Wet): 6.1 m.
Fluid Inlet/Outlet: 1/2" BSP(F)
Installation: Wall or surface mounted
Accessories Included: Exhaust air Silencer
Aluminium 5.9 kg.
320 x 200 x 340 mm.
TYPICAL CODE = B15. 01. AA. BB. TTS
Performance curve
B 15Air Operated Diaphragm Pump Range
Metallic Series
13
MODEL - B15 : Standard X15 : ATEX approved
DESIGN LEVEL
VALVE SEATSA : ALUMINIUMB : BUNA-NE : EPDMN : NEOPRENEV : VITONS : 316 STAILESS STEEL
VALVE BALLSB : BUNA-N V : VITONE : EPDM T : PTFEN : NEOPRENES : 316 STAILESS STEEL
DIAPHRAGMSB : BUNA-N P : POLYURETHANEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE
WETTED COMPONENTSA : ALUMINUM
NON-WETTED COMPONENTSA : ALUMINIUM
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
FLUID FLOW RATE
ME
TR
ES
HE
AD
30
20
20
40
10
10
2
6
20
4
30
8
85
80
70
50
4060
80
100
120
60
FE
ET
HE
AD
- UK GPM10 12 14
L/MIN
50
100
250
150
200
PS
I H
EA
D
0
277
40 50 60 70 -
100 83
25
245.5
127.583 44
203.5
89
120
233160
127.5
124.5AIR INLET
FLUID DISCHARGE1/2” BSP
AIR INLET1/4” BSP
AIR EXHAUST1/4” BSP
FLUID SUCTION1/2” BSP
Ø 7mmMOUNTING HOLES
8.0 Bar AIR PRESSURE
(116psi)
7 0r
. Ba( 0. s
11 5 p i)
6.0 Bar(87 psi)
0 B5. ar72.
(5 psi)
4 0 B.ar58
(psi)
3.0 Bar43. ps )
(5 i
2.0 Bar29.s )
(0 p i
1.5 Bar7
(21. psi)
310 M /hr(5.8 CFM)
335 M /hr(20.6 CFM)
320 M /hr(11.7 CFM)
315 M /hr AIR CONSUMPTION(8.8 CFM)
www.blagdonpump.com
Simple construction, easy to maintainSelf priming, ideal for emptyingPressures to 8.6 barFlow rates up to 60 litres/minuteBolted construction for greater integrity316L Stainless steel
TECHNICAL DATA;
METALLIC SERIES B15STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 60 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 2 mm.
Air Inlet: 1/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 4.6 m.
Suction Lift (Wet): 6.1 m.
Fluid Inlet/Outlet: 1/2" BSP(F)
Installation: Wall or surface mounted
Accessories Included: Exhaust air Silencer
Stainless Steel/Aluminium 9.7 kg.
Stainless Steel 15 kg.
320 x 200 x 340 mm.
TYPICAL CODE = B15. 01. SA. BB. TTS
Performance curve
Metallic Series
14
MODEL - B15 : Standard X15 : ATEX approved
DESIGN LEVELVALVE SEATSS : 316 STAINLESS STEEL
VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL
DIAPHRAGMSB : BUNA-N P : POLYURETHANEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE
WETTED COMPONENTSS : 316 STAINLESS STEEL
NON-WETTED COMPONENTSA : ALUMINIUMS : 316 STAINLESS STEEL
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
261
188
94
25
201
288 IN–LINE MANIFOLD OPTION
241
126 AIR INLET
AIR INLET1/4” BSP
156
75FLUID DISCHARGE1/2” BSP
AIR EXHAUST1/4” BSP
FLUIDSUCTION1/2” BSP
172
Ø 7MOUNTING
HOLES
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
FLUID FLOW RATE
ME
TR
ES
HE
AD
30
20
20
40
10
10
2
6
20
4
30
8
85
80
70
50
4060
80
100
120
60
FE
ET
HE
AD
- UK GPM10 12 14
L/MIN
50
100
250
150
200
PS
I H
EA
D
0
277
40 50 60 70 -
8.0 Bar AIR PRESSURE
(116psi)
7 0r
. Ba( 0. s
11 5 p i)
6.0 Bar(87 psi)
0 B5. ar72.
(5 psi)
4 0 B.ar58
(psi)
3.0 Bar43. ps )
(5 i
2.0 Bar29.s )
(0 p i
1.5 Bar7
(21. psi)
310 M /hr(5.8 CFM)
335 M /hr(20.6 CFM)
320 M /hr(11.7 CFM)
315 M /hr AIR CONSUMPTION(8.8 CFM)
B 15 Air Operated Diaphragm Pump Range
www.blagdonpump.com
Simple construction, easy to maintainAvailable in virgin and conductive PTFEChemically inertFlanged end connectionsAtex approved - intrinsically safeReliable, proven pneumatic air valveStrong, robust design
MODEL - B15 : StandardX15 : ATEX approved
DESIGN LEVELVALVE SEATST : PTFE
VALVE BALLST : PTFE
DIAPHRAGMST : PTFEX : PTFE/VITON (HIGHT TEMP.)
WETTED COMPONENTST : PTFE4 : CONDUCTIVE PTFE
NON-WETTED COMPONENTS4 : CONDUCTIVE PTFE5 : POLYETHYLENE (HDPE)S : 316 STAINLESS STEEL
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
15
B8 ar(11 p
i6
s )
B7 ar(
pi
101.5 s )6 B r a(87
si p
)
5 Bar7p )
( 2.5 si
4 Bar( 8 ps )5 i
3 Bar(43i)
.5 ps
2 Bar2
)( 9 psi
1. Bar R R S
5 AI P E SURE21.7p i)
(s
ME
TR
ES
HE
AD
30
0
10
20
2 4
FLUID FLOWRATE
6 8
60
40
50
70
80
(5.3 CFM)
9 M /hr3
(6.5 CFM)
11 M /hr3 21 M /hr3
(12.4 CFM) (17.6 CFM)
30 M /hr3
FE
ET
HE
AD
99
12 - UK GPM10
0
33
66
197
131
164
230
266
PS
I H
EA
D
42.6
28.4
14.2
0
113.6
99.4
71.0
56.8
85.2
10 20 30 40 50 L/MIN
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitter.
Performance curve
TECHNICAL DATA;
NON METALLIC SERIES B15CONDUCTIVE / VIRGIN PTFE
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 48 Itrs/min
Max. Working Pressure: 7 bar
Max. Solid Particle Size: 2 mm.
Air Inlet: 1/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 4.6 m.
Suction Lift (Wet): 6.1 m.
Fluid Inlet/Outlet: 1/2" ANSI #150 RF Flanged
Installation: Wall or surface mounted
Accessories Included: Exhaust air Silencer
Conductive PTFE 16 kg.
Virgin PTFE 16 kg.
335 x 215 x 335 mm.
TYPICAL CODE = B15. 00. TS. BB.TTT
PTFE Non Metallic Series
B 15Air Operated Diaphragm Pump Range
www.blagdonpump.com
Ø 40 MOUNTING PADS FASTENED THRO’ WITH M6
SOCKET CAP SCREWS
158
Ø93
31.5
311.5
265
273.5
212
53
54
108
150
160 BODY DIA.
AIR INLET1/4” BSP
88
159AIR
INLET
GROUNDING LEAD - ATTACHED TO OUTER COVER.(ATEX CERTIFIED MODELS ONLY)
169
285AIR EXHAUST1/4” BSP
90.5
Range of DIN/RJT and Ferrule connectionsSelf priming, for emptying containersFood grade elastomers-EPDM/PTFEPressures to 8.6 barCertified CIP cleanableEU Design approval
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
HYGIENIC SERIES B15STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 60 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 2 mm.
Air Inlet: 1/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 4.6 m.
Suction Lift (Wet): 6.1 m.
Fluid Inlet/Outlet: 1" RJT (Standard)
Installation: Wall or surface mounted
Accessories Included: Exhaust air silencer
Stainless Steel/Aluminium 10.5 kg.
Stainless Steel 15.8 kg.
320 x 210 x 390 mm.
TYPICAL CODE = B15.01. ZF. BB. EEE
Performance curve
Hygienic Series
16
MODEL - B15 StandardX15: ATEX approved
DESIGN LEVELVALVE SEATSE : FOOD GRADE EPDM
VALVE BALLSE : FOOD GRADE EPDMT : PTFES : 316 STAINLESS STEEL
DIAPHRAGMSE : FOOD GRADE EPDMT : PTFEO : ONE PIECE PTFE
WETTED COMPONENTSZ : 316 STAINLESS STEEL
(POLISHED)
NON-WETTED COMPONENTSS : 316 STAINLESS STEELF : NICKEL PLATED ALUMINIUM
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
FLUID FLOW RATE
50
100
150
20
40
60
80
100
120
PS
I H
EA
D
FE
ET
HE
AD
200
250
280
ME
TR
ES
HE
AD
2
10
20
30
84 6
10 12 1814 16 - UK GAL/MIN
40
50
60
70
80
85
10 20 30 40 50 60 70 80 - L/MIN
112 130
33.5
296 160
83
288342
132
4MOUNTINGHOLES Ø9
SUCTION INLET1” MALE RJT
170AIR INLET
AIR INLET1/4” BSP(F)
SILENCER1/4” BSP
DISCHARGE OUTLET1” MALE RJT
www.blagdonpump.com
B 15 Air Operated Diaphragm Pump Range
330 M /hr(17.6 CFM)
310 M /hr(5.8 CFM)
320 M /hr(11.7 CFM)
315 M /hr AIR CONSUMPTION(8.8 CFM)
a
R
PRESUR
8 Br AI
SE
(16 psi)
1
7.0 Bar(101.5 psi)
6.0 Bar(87 psi)
a5.0 B r(72.5 psi)
4 0 B r.
a(5 psi)8
r3.0 Ba4
)
( 3.5 psi
0r
2. Ba2 0
)
( 9. psi
1.5 Bar21.7 p
(si)
Materials options suitable for a wide range of chemicalsSimple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8 barFlow rates up to 154 litres/minuteFlanged or screwed end connectionsReliable, pneumatic air valveStrong, robust design, bolted construction
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
MOULDED NON METALLIC SERIES B25POLYPROPYLENE AND PVDF
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 152 Itrs/min
Max. Working Pressure: 8 bar
Max. Solid Particle Size: 3 mm.
Air Inlet: 3/8" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 6.1 m.
Suction Lift (Wet): 7.6 m.
Fluid Inlet/Outlet: 1" ANSI # 150 Flanged RF
Installation: Wall or surface mounted
Accessories Included: Exhaust air Silencer
Polypropylene/Aluminium 13.5 kg.
PVDF/Aluminium 18 kg.
Polypropylene/Stainless Steel 18 kg.
PVDF/Stainless Steel 20 kg.
440 x 260 x 470 mm.
TYPICAL CODE = B25. PT. BB. EEP
Performance curve
Moulded Non Metallic Series
17
MODEL - B25
WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)
VALVE SEATSB : BUNA-N N : NEOPRENEE : EPDMK : KYNAR (PVDF)P : POLYPROPYLENE
VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : STAINLESS STEEL
DIAPHRAGMSB : BUNA-N T : PTFEE : EPDM V : VITONH : POLYESTER (HYTREL)N : NEOPRENEP : POLYURETHENER : SANTOPRENEO : ONE-PIECE PTFE
NON-WETTED COMPONENTST : ALUMINIUM / EPOXY PAINTEDW: STAINLESS STEEL/EPOXY PAINTED
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
ME
TR
ES
HE
AD
99 FE
ET
HE
AD
3042.6
0
14.2
0
28.4
0
10
20
FLUID FLOWRATE
5 10 15 - UK GPM20
0
33
66
60
85.2
PS
I H
EA
D
56.8
71.0
40
50
99.4
113.6
70
80
197
131
164
230
262
20 40 60 80 100 120 140 160 - L/MIN
25 30 35
MOUNTINGSLOTS
64
317 CRS
108
DISCHARGE OUTLET1” ANSI 150 FLANGE
AIR INLET3/8” BSP(F)
AIR EXHAUST1/2” BSP(F)
SUCTIONINLET1” ANSI 150 FLANGE
230
115
20 20
205
9
222
394
432
105
435
www.blagdonpump.com
B 25Air Operated Diaphragm Pump Range
8 Bar1 (1 6 psi)
7 Bar(1 .5 psi
01 )
75 M /hr
(44 CFM)
358 M /hr
(34 CFM)
339 M /hr
(23 CFM)
319 M /hr
(11 CFM)
3
312 M /hr(7 CFM)
6 Bar8 i( 7 ps )
5 Bar(72. p i)5 s
4 Bar
(58 psi)
3 Bar(4 .5 psi3 )
2 Bar
(2 9 psi)
1 r R PRESSU E
Ba AI R(14. si)5 p
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
Material options suitable for a wide range of applicationsSimple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 180 litres/minuteBolted construction for greater integrityWeighted Valve Balls for high S.G. and viscous fluidsReliable, pneumatic air valve
TECHNICAL DATA;
METALLIC SERIES B2503ALUMINIUM, STAINLESS STEEL, CAST IRON
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 180 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 3 mm.
Air Inlet: 3/8” BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 6.1 m.
Suction Lift (Wet): 7.6 m.
Fluid Inlet/Outlet: 1" BSP(F)
Installation: Wall or surface mounted
Accessories Included: Exhaust air Silencer
Aluminium 16 kg.
Cast Iron/Aluminium 25 kg.
Stainless Steel/Aluminium 25 kg.
400 x 300 x 470 mm.
TYPICAL CODE = B25.03 AA. BB. BBS
Performance curve
B 25 Air Operated Diaphragm Pump Range
Metallic Series
18
MODEL - B2503 : StandardX2503 : ATEX approved
WETTED COMPONENTSA : ALUMINIUMS : 316L STAINLESS STEELC : CAST IRON
VALVE SEATSS : 316L STAINLESS STEEL
VALVE BALLST : PTFE E : EPDMN : NEOPRENE V : VITONB : BUNA-N S : STAINLESS STEELD : DELRIN
DIAPHRAGMSN : NEOPRENE V : VITONP : POLYESTER B : BUNA-NR : SANTROPRENE T : PTFEP : POLYURETHANE E : EPDMO : ONE-PIECE PTFE
NON-WETTED COMPONENTSA : ALUMINIUM
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
30 FE
ET
HE
AD
ME
TR
ES
HE
AD
0 0
10
20
FLUID FLOWRATE
0
PS
I H
EA
D
60
40
50
70
80
90
42.6
28.4
14.2
113.6
99.4
71.0
56.8
85.2
PS
I H
EA
D
99
33
66
197
131
164
230
262
127.8 295
200 40 60 100 140 160 200 - L/MIN18012080
5 10 15 20 25 - UK GPM4030 35
7 Bar10 .5 s )
( 1 p i
6 Bar(87 psi)
4 Barp(58 si)
3 B ra(4 . psi)
3 5
2 Bar(29 psi)
1 AI PRESSURE
Bar R 14.5 si)(
p
www.blagdonpump.com
5 Bar72.5 ps )
(i
8 BAR(116 s )p i
8.6 Bar
i
(125 ps )
319 M /hr(11 CFM)
339 M /hr(23 CFM)
358 M /hr(34 CFM)
375 M /hr(44 CFM)
3100 M /hr(59 CFM)
312 M /hr(7 CFM)
358210
105
226
AIR INLET3/8” BSPPARALLEL
FLUIDOUTLET1” BSPPARALLEL
EXHAUSTSILENCER1/2” BSP
192
50
21
5 A
IR IN
LE
T
21
5 A
IR E
XH
AU
ST
32
9 C
RS
40
5
FLUIDINLET1” BSPPARALLEL
B 25
19
MODELB25: SERIES 00
WETTED COMPONENTST : PTFE4 : CONDUCTIVE PTFE
VALVE SEATST : PTFE
VALVE BALLST : PTFE
DIAPHRAGMST : PTFEX : PTFE/VITON (HIGH TEMP.)
NON-WETTED COMPONENTS4 : CONDUCTIVE PTFE5 : POLYETHYLENE (HDPE)
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
TYPICAL CODE = B25.00.T5.BB.TTT-LF
Simple construction, easy to maintainAvailable in Virgin and conductive PTFEChemically inertFlanged end connectionsAtex approved – intrinsically safeReliable, proven pneumatic air valveStrong, robust design
60 281 188
63
298
137 1” BSP PARALLELFLUID OUTLET
1” BSP PARALLELFLUID INLET
AIR EXHAUST1/2” BSP
201
386
411
230GROUNDING LEADATTACHED TO BASE LEG.(ATEX CERTIFIED MODELS ONLY)
212AIR INLET
AIR INLET3/8” BSP
391
TECHNICAL DATA;
NON METALLIC SERIES B25 VIRGIN PTFE, CONDUCTIVE PTFE
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 136 ltrs/min
Max. Working Pressure: 7 Bar
(8 Bar Max. Air Inlet)
Max. Solid Particle Size: 3 mm.
Air Inlet: 3/8" BSP (F)
3/8" NPT (F)OTemperature Limits: 100 C
Suction Lift (Dry): 6.1 m
Suction Lift (Wet): 7.6 m
Inlet/Outlet: 1" BSP/ANSI
150 Flange
Installation: Wall or surface mounted
Accessories Included: Exhaust air Silencer
Virgin PTFE: 37 kg.
Conductive PTFE: 40 kg.
500 x 300 x 450 mm.
www.blagdonpump.com
Air Operated Diaphragm Pump Range
PTFE – Non Metallic Series
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
ME
TR
ES
HE
AD
99 FE
ET
HE
AD
3042.6
0
14.2
0
28.4
0
10
20
FLUID FLOWRATE
5 10 15 - UK GPM20
0
33
66
60
85.2
PS
I H
EA
D
56.8
71.0
40
50
99.4
113.6
70
80
197
131
164
230
262
20 40 60 80 100 120 140 160 - L/MIN
25 30 35
8 Bar1 (1 6 psi)
7 Bar(1 .5 psi
01 )
75 M /hr
(44 CFM)
358 M /hr
(34 CFM)
339 M /hr
(23 CFM)
319 M /hr
(11 CFM)
3
312 M /hr(7 CFM)
6 Bar8 i( 7 ps )
5 Bar(72. p i)5 s
4 Bar
(58 psi)
3 Bar(4 .5 psi3 )
2 Bar
(2 9 psi)
1 r R PRESSU E
Ba AI R(14. si)5 p
Performance curve
Robust construction, easy to maintainCan easily handle viscous, high S.G and high head applicationsSmooth action, less vibration and wearPressures to 16 barFlow rates up to 125 litres/minuteBolted construction for greater integrityReliable pneumatic air valveStalls against closed head without damage.Re-start on demand
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
METALLIC SERIES - FULL FLOW 2:1 B25
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 125 ltrs/min
Max. Working Pressure: 16 Bar (232 psi)
(8 Bar Max. Air Inlet)
Max. Solid Particle Size: 3 mm.
Air Inlet: 3/8" BSP (F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 6 m. (20')
Suction Lift (Wet): 7.6 m. (25')
Fluid Inlet/Outlet: 1" BSP (F)
Installation: Surface mounted
Accessories Included: Exhaust air Silencer
Stainless Steel/Aluminium 33 kg.
Aluminium 24.5 kg.
480 x 320 x 480 mm.
TYPICAL CODE = B25. 01. AA. W3. NNS
Performance curve
B 25 Air Operated Diaphragm Pump Range
Full Flow High Pressure
20 www.blagdonpump.com
MODEL - B25 : Standard X25 : ATEX approved
DESIGN LEVELVALVE SEATSS : 316 STAINLESS STEEL
VALVE BALLST : PTFEN : NEOPRENEB : BUNA-NE : EPDMS : STAINLESS STEELV : VITON
DIAPHRAGMST : PTFEN : NEOPRENEB : BUNA-NR : SANTOPRENEE : EPDMH : POLYESTER (HYTREL)O : ONE PIECE PTFEP : POLYURETHANEV : VITON
WETTED COMPONENTSA : ALUMINIUMS : 316 STAINLESS STEEL.
NON-WETTED COMPONENTSA : ALUMINIUM
VALVE TYPEB : BALLW: WEIGHTED
MODEL DESIGNATION
100
FLUID FLOW RATE
ME
TR
ES
HE
AD
60
40
20
40
80
20
4 8
40
60
12
80
16
180
160
140
120
100
80PS
I H
EA
D
120
160
200
240
200
100
- UK GPM2820
120
24
140
32
- L/MIN
600
500
400
300
FE
ET
HE
AD
0
254
405
464
438
72 105
250
50
330
280
MOUNTING HOLESØ 8.5 THRO’
DISCHARGE OUTLET1” BSP (F)
3/8” BSP (F)AIR INLET
AIR EXHAUST1/2” BSP(F)
202AIR INLET
SUCTION INLET1” BSP (F)
370 M /hr(41.2 CFM)
314 M /hr(8.2 CFM)
358 M /hr(34.2 CFM)
350 M /hr(29.4 CFM)
325 M /hr(14.7 CFM)
340 M /hr AIR CONSUMPTION(23.5 CFM)
1.5 Bar(21.7 ps )i
2 .0 Bar0(29. psi)
. a3 0 B r3 5 p i)
(4 . s
.0 Ba
4
r(58 p
)si
5 Ba.0
r(7 .5 psi2 )
6.0 Bar(87 psi)
7.0 Bar(10 . si)1 5 p
8
aA
RRES
RE
.0 Br I
P
SU
6i)
(11 ps
Range of DIN/RJT and Ferrule connectionsSelf priming for emptying containersFood grade elastomers-EPDM/PTFEPressures to 8.6 barCapable of handling high viscosity & S.GCertified CIP cleanableEU Design approval316L Stainless steel
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
HYGIENIC SERIES B25STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 136 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 5 mm.
Air Inlet: 3/8" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 4.6 m.
Suction Lift (Wet): 6.1 m.
Fluid Inlet/Outlet: 1" RJT
Installation: Wall or surface mounted
Accessories Included: Exhaust air Silencer
Stainless Steel 21.5 kg.
450 x 280 x 500 mm.
TYPICAL CODE = B25. ZF. BB. EEE
Performance curve
B 25Air Operated Diaphragm Pump Range
Hygienic Series
21
MODEL - B25X25: ATEX approved
WETTED COMPONENTSZ : 316 STAINLESS STEEL (POLISHED)
VALVE SEATSE : FOOD GRADE EPDMS : 316 STAINLESS STEEL
VALVE BALLSE : FOOD GRADE EPDMT : PTFES : 316 STAINLESS STEEL
DIAPHRAGMSE : FOOD GRADE EPDMT : PTFE
NON-WETTED COMPONENTSS : 316 STAINLESS STEELF : NICKEL PLATED ALUMINIUM
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
FLUID FLOW RATE
10
20
30
40
50
60
70
80
ME
TR
ES
HE
AD
50
100
150
20
40
60
80
100
120
PS
I H
EA
D
FE
ET
HE
AD
200
250
85 279
20 40 60 80 100 120 140 160 L/MIN
4 168 12 20 24 - UK GPM28 32
160 126.5
SUNCTIONINLET1” MALE RJT
DISCHARGE OUTLET1” MALE RJT
AIR INLET3/8” BSP(F)
SILENCER1/2” BSP
223AIR INLET
160
220
55
432
226413
108187
356
4 MOUNTING HOLES Ø 9
www.blagdonpump.com
365 M /hr(38 CFM)
3.0 arB( 3 5 p i)4 . s
4.0 arB58 p )
( si
5.0 Bar(72.5 psi)
B6.0 ar(87 psi)
7 0 Ba. r0 5 p
(1 1. si)
320 M /hr(11.7 CFM)
340 M /hr(23.5 CFM)
330 M /hr AIR CONSUMPTION(17.6 CFM)
BarI
SU
8.0 A R PRE
SRE
16 si
(1p
)
.0 Bar2(29.0 psi)5 r
1. Ba. s )
(21 7 p i
Simple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 320 litres/minuteBolted construction for greater integrityReliable, proven pneumatic air valve system
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
The above drawing shows Aluminium and Cast Iron only.
TECHNICAL DATA;
METALLIC SERIES B40ALUMINIUM, CAST IRON & STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 320 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 6 mm.
Air Inlet: 3/8" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 6.1 m.
Suction Lift (Wet): 7.6 m.
Fluid Inlet/Outlet: 1 1/2" BSP(F)
Installation: Surface mounted
Accessories Included: Exhaust air Silencer
Aluminium 22 kg.
Stainless Steel/Aluminium 36 kg.
Stainless Steel 46 kg.
Stainless Steel/Cast Iron 46 kg.
Cast Iron/Aluminium 51.4 kg.
Cast Iron 61 kg.
500 x 350 x 600 mm.
TYPICAL CODE = B40. 02. AA. BB. BBS
Performance curve
B 40 Air Operated Diaphragm Pump Range
Metallic Series
22
MODEL - B40 : Standard X40 : ATEX approved
DESIGN LEVELVALVE SEATSB : BUNA-N A : ALUMINIUME : EPDM N : NEOPRENEV : VITONS : 316 STAINLESS STEEL
VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL
DIAPHRAGMSB : BUNA-N P : POLYURETHANEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE
WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL
NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
FLUID FLOW RATE
10
20
30
40
50
60
70
80
ME
TR
ES
HE
AD
50
100
150
20
40
60
80
100
120
PS
I H
EA
D
FE
ET
HE
AD
200
250
85 279
- L/MIN50 100 150 200 250 300 3500
0 10 3020 5040 8060 - UK GPM70
204
178
FLUID SUCTIONINLET 1”1/2 BSP
AIR INLET3/8” BSP
FLUID DISCHARGEOUTLET 1”1/2 BSP
SILENCER1/2” BSP(M)
271AIR INLET
270
441
243
117.5
549
486 IN-LINE MANIFOLD
470
4856
251
13 SLOT
www.blagdonpump.com
360 M /hr AIR CONSUMPTION(35.3 CFM)
320 M /hr(11.7 CFM)
390 M /hr(53 CFM)
3100 M /hr(58.8 CFM)
3115 M /hr(67.5 CFM)
380 M /hr(47 CFM)
RR
S
E
8.0Bar AI
PE
SUR
(1
si
16 p
)7.0 Ba r(1
.5si
01 p
)
6.0 Bar(87 psi)
5.0 Bar72.si
(5 p )4.0 Bar(58 psi)
3.0 Bar5
)(43. psi
2 0. Bar29 p i
( .0 s )B1.5 ar
21. i( 7 ps )
340 M /hr(23.5 CFM)
Simple construction, easy to maintainCapable of handling high S.G and viscous fluidsPressures to 8.6 barFlow rates up to 530 litres/minuteFlanged end connectionsReliable, proven pneumatic air valve
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
MOULDED NON METALLIC SERIES B50POLYPROPYLENE & PVDF
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 530 ltrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 6 mm.
Air Inlet: 3/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 6.1 m.
Suction Lift (Wet): 7.6 m.
Fluid Inlet/Outlet: 2" ANSI #150 RF Flanged
Installation: Surface mounted
Accessories Included: Exhaust Air Silencer
Polypropylene/Aluminium 39.5 kg.
Polypropylene/Stainless 50.5 kg.
PVDF/Aluminium 50.5 kg.
PVDF/Stainless 70 kg.
630 x 380 x 670 mm.
TYPICAL CODE = B50. 02. PT. BB. EEP
Performance curve
B 50Air Operated Diaphragm Pump Range
Moulded Non Metallic Series
23
MODEL - B50
DESIGN LEVEL VALVE SEATSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENEP : POLYPROPYLENE
VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL
DIAPHRAGMSB : BUNA-N T : PTFEE : EPDM V : VITONH : POLYESTER (HYTEL)N : NEOPRENEP : POLYURETHANER : SANTOPRENEO : ONE-PIECE PTFE
WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)
NON-WETTED COMPONENTST : ALUMINIUM / EPOXY PAINTEDW: 316 STAINLESS STEEL / EPOXY
PAINTED
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
FE
ET
HE
AD
PS
I H
EA
D
ME
TR
ES
HE
AD
FLUID FLOW RATE
0 20 40
20
40
60
0 50 100
10
20
200150 250
30
40
- UK GPM60 80 100
550 - L/Min
131
98
66
33
350300 400 500450
80
100
120
60
50
70
80 262
229
197
164
120
234
280
324
620
289AIR INLET
AIR INLET3/4” BSP(F)
DISCHARGE OUTLET2” ANSI 150 FLANGE
AIR EXHAUST3/4” BSP(F)
SUCTION INLET2” ANSI150 FLANGE
139
321
561
617
148
80
464
www.blagdonpump.com
340 M /hr AIR CONSUMPTION(23.5 CFM)
330 M /hr(17.5 CFM)
360 M /hr(35 CFM)
380 M /hr(47 CFM)
3100 M /hr(59 CFM)
3140 M /hr(82.5 CFM)
320 M /hr(12 CFM)
.0 Br
4 a(5
p i)8 s3 a.0 B r
4 .5 p )( 3 si
B1.5 ar1. i
(2 7 ps )
2 0. Bar29 p i
( .0 s )
8.0 Bar AIR PRESSURE
( 16 ps )
1
i
.0a
7 B
r(1.5
s
01 p
i)
6.0 Bar(87 psi)
.0 Ba5
r2. p)
(75
si
Air valve designed for in-line maintenanceEnd ported for improved flowPressures to 8.6 barFlow rates up to 530 litres/minuteBolted construction for greater integrityRobust construction
TECHNICAL DATA;
METALLIC SERIES B50ALUMINIUM & CAST IRON
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 530 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 6 mm.
Air Inlet: 3/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 6.1 m.
Suction Lift (Wet): 7.6 m.
Fluid Inlet/Outlet: 2" BSP(F)
Installation: Surface mounted
Accessories Included: Exhaust air Silencer
Aluminium 38 kg.
Cast Iron/Aluminium 63 kg.
Cast Iron 90 kg.
540 x 350 x 750 mm.
TYPICAL CODE = B50. 02. AA. BB. BBB
Performance curve
B 50 Air Operated Diaphragm Pump Range
Metallic Series
24 www.blagdonpump.com
MODEL - B50 : Standard X50 : ATEX approved
DESIGN LEVELVALVE SEATSA : ALUMINIUMS : 316 STAINLESS STEELN : NEOPRENEB : BUNA-NE : EPDMT : PTFE
VALVE BALLSB : BUNA-NN : NEOPRENEE : EPDMV : VITONS : 316 STAINLESS STEELT : PTFE
DIAPHRAGMSB : BUNA-N V : VITONT : PTFE E : EPDMH : POLYESTERP : POLYURETHANEO : ONE PIECEN : NEOPRENER : SANTOPRENE
WETTED COMPONENTSA : ALUMINIUMC : CAST IRON
NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRON
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
256 118.5
625578 CRS
1447
60
460
229 CRS20 SLOT DEPTH
SUCTION INLET2” BSP
AIR INLET3/4” BSP
340AIR INLET/EXHAUST
254
127
663
139
316
246.5
493 IN-LINE OPTIONDISCHARGE OUTLET2” BSP
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
FE
ET
HE
AD
PS
I H
EA
D
ME
TR
ES
HE
AD
FLUID FLOW RATE
0 20 40
20
40
60
0 50 100
10
20
200150 250
30
40
- UK GPM60 80 100
550 - L/Min
131
98
66
33
350300 400 500450
80
100
120
60
50
70
80 262
229
197
164
120
340 M /hr AIR CONSUMPTION(23.5 CFM)
330 M /hr(17.5 CFM)
360 M /hr(35 CFM)
380 M /hr(47 CFM)
3100 M /hr(59 CFM)
3140 M /hr(82.5 CFM)
320 M /hr(12 CFM)
.0 Br
4 a(5
p i)8 s3 a.0 B r
4 .5 p )( 3 si
B1.5 ar1. i
(2 7 ps )
2 0. Bar29 p i
( .0 s )
8.0 Bar AIR PRESSURE
( 16 ps )
1
i
.0a
7 B
r(1.5
s
01 p
i)
6.0 Bar(87 psi)
.0 Ba5
r2. p)
(75
si
Performance curve
Simple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 530 litres/minuteBolted construction for greater integrity316 Stainless Steel
TECHNICAL DATA;
METALLIC SERIES B50STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 530 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 6 mm.
Air Inlet: 3/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 6.1 m.
Suction Lift (Wet): 7.6 m.
Fluid Inlet/Outlet: 2" BSP(F)
Installation: Surface mounted
Accessories Included: Exhaust air Silencer
Stainless Steel/Aluminium 70 kg.
Stainless Steel 95.5 kg.
Stainless Steel/Cast Iron 95.5 kg.
630 x 380 x 670 mm.
TYPICAL CODE = B50. 02. SA. BB. BBS
B 50Air Operated Diaphragm Pump Range
Metallic Series
25
MODEL - B50 : Standard X50 : ATEX approved
DESIGN LEVELVALVE SEATSA : ALUMINIUMS : 316 STAINLESS STEELN : NEOPRENEB : BUNA-NE : EPDMV : VITON
VALVE BALLSB : BUNA-NN : NEOPRENEE : EPDMT : PTFES : 316 STAINLESS STEELV : VITON
DIAPHRAGMSB : BUNA-NE : EPDMH : POLYESTERP : POLYURETHANET : PTFER : SANTOPRENEN : NEOPRENE
WETTED COMPONENTSS : 316 STAINLESS STEEL
NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
130
260
328
30
269AIR INLET
AIR INLET3/4” BSP(F)
FLUID OUTLET2” BSP(F)
FLUID INLET2” BSP(F)
169
381 110
64
579
590139
478
Ø8.7 HOLES THRO’ BASE LEG
www.blagdonpump.com
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
FE
ET
HE
AD
PS
I H
EA
D
ME
TR
ES
HE
AD
FLUID FLOW RATE
0 20 40
20
40
60
0 50 100
10
20
200150 250
30
40
- UK GPM60 80 100
550 - L/Min
131
98
66
33
350300 400 500450
80
100
120
60
50
70
80 262
229
197
164
120
340 M /hr AIR CONSUMPTION(23.5 CFM)
330 M /hr(17.5 CFM)
360 M /hr(35 CFM)
380 M /hr(47 CFM)
3100 M /hr(59 CFM)
3140 M /hr(82.5 CFM)
320 M /hr(12 CFM)
.0 Br
4 a(5
p i)8 s3 a.0 B r
4 .5 p )( 3 si
B1.5 ar1. i
(2 7 ps )
2 0. Bar29 p i
( .0 s )
8.0 Bar AIR PRESSURE
( 16 ps )
1
i
.0a
7 B
r(1.5
s
01 p
i)
6.0 Bar(87 psi)
.0 Ba5
r2. p)
(75
si
Robust construction, easy to maintainCan easily handle viscous, high S.G and high head applicationsSmooth action, less vibration and wearPressures to 16 barFlow rates up to 350 litres/minuteBolted construction for greater integrityReliable pneumatic air valveStalls against closed head without damage.Re-start on demand
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
The above drawing shows Stainless Steel only.
TECHNICAL DATA;
METALLIC SERIES-FULL FLOW 2:1 B50STAINLESS STEEL, ALUMINIUM
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 350 Itrs/min
Max. Working Pressure: 16 bar
Max. Solid Particle Size: 6 mm.
Air Inlet: 3/4" BSP(F)
Max Air Inlet: 8 bar
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 6.1 m.
Suction Lift (Wet): 7.6 m.
Fluid Inlet/Outlet: 2" BSP(F)
Installation: Surface mounted
Accessories Included: Exhaust air Silencer
Aluminium 52 kg.
Stainless Steel/Aluminium 78 kg.
850 x 450 x 800 mm.
TYPICAL CODE = B50. 02. SA. W3. BBS
Performance curve
B 50 Air Operated Diaphragm Pump Range
Full Flow High Pressure
26
MODEL - B50 : Standard X50 : ATEX approved
DESIGN LEVELVALVE SEATSS : 316 STAINLESS STEELA : ALUMINIUM
VALVE BALLSB : BUNA-NN : NEOPRENEE : EPDMV : VITONT : PTFES : 316 STAINLESS STEEL
DIAPHRAGMSB : BUNA-NN : NEOPRENEE : EPDMH : POLYESTERP : POYURETHANEV : VITONT : PTFER : SANTOPRENEO : ONE PIECE
WETTED COMPONENTSS : 316 STAINLESS STEELA : ALUMINIUM
NON-WETTED COMPONENTSA : ALUMINIUM
VALVE TYPEB : BALLW: WEIGHTED
MODEL DESIGNATION
FE
ET
HE
AD
ME
TR
ES
HE
AD
100 231
200 250 3000 50 100 150
20
40
60
80
350 - L/min
46
92
138
185
110
90
10
20
30
40
50
60
70
80
100
130
120
140
150
160
PS
I H
EA
D
120
140
160
180
200
220
277
323
369
416
462
508
FLUID FLOW RATE10 80 - UK GPM20 30 40 50 60 70
212
577
130260
320
67
280
595490
AIR INLET3/4” BSP(F)
FLUID INLET2” BSP(F)
FLUID OUTLET2” BSP(F)
SILENCER (FITTED)
3/4” BSP(M)
316729
139
4 HOLES THRO’ Ø8.5
www.blagdonpump.com
80Ba
AIR
ESSURE
.
r
PR
(16 p
)
1
si
a7.0 B
r.5 p i
(101 s )
B6.0
ar7(8
psi)
5.0 Bar72. ps )
(5 i
4.0ar
B(5 p i)
8s
3.0 Bar(43.5 psi)
B r1.5 a
1.(2 7 psi)
2.0 Ba r29. p )
( 0 si
330 M /hr(17.6 SCFM)
340 M /hr(23.5 CFM)
3180 M /hr(106 CFM)
3160 M /hr(94 CFM)
390 M /hr(53 CFM)
365 M /hr(38 CFM)
3135 M /hr AIR CONSUMPTION(79.5 CFM)
Range of DIN/RJT and Ferrule connectionsSelf priming for emptying containersFood grade elastomers-EPDM/PTFEPressures to 8.6 barCapable of handling high viscosity & S.GCertified CIP cleanableEU Design approval316 Stainless steel
oPump stand option for 180 rotation in place
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
HYGIENIC SERIES B50STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 500 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 6 mm.
Air Inlet: 3/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 6.1 m.
Suction Lift (Wet): 7.6 m.
Fluid Inlet/Outlet: 2" RJT (Standard)
Installation: Surface mounted
Accessories Included: Exhaust air Silencer
Stainless Steel 64 kg.
660 x 430 x 880 mm.
TYPICAL CODE = B50. 01. ZF. BB. EEE
Performance curve
Hygienic Series
27
MODEL - B50 StandardX50: ATEX approved
DESIGN LEVELVALVE SEATSE : FOOD GRADE EPDMT : PTFE
VALVE BALLSE : FOOD GRADE EPDMT : PTFES : 316 STAINLESS STEEL
DIAPHRAGMSE : FOOD GRADE EPDMH : POLYESTER FOOD GRADEO : ONE PIECE PTFE
WETTED COMPONENTSZ : 316 STAINLESS STEEL (ELECTRO POLISHED)
NON-WETTED COMPONENTSS : 316 STAINLESS STEELF : NICKEL PLATED ALUMINIUM
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
198
689
540270
30572
SUCTION INLET2” RJT - STANDARD OTHER OPTIONS AVAILABLE
90
714
598
382AIR
EXHAUST
AIR EXHAUST
3/4” BSP
322225
Ø61 RUBBER MOUNTING PADS (M8 FIXING BOLTS)
AIR INLET3/4” BSP
DISCHARGE OUTLET - 2” RJT STANDARDOTHER OPTIONS AVAILABLE
382AIR INLET
www.blagdonpump.com
FE
ET
HE
AD
ME
TR
ES
HE
AD
FLUID FLOW RATE
PS
I H
EA
D
10
0
20
30
40
50
60
70
80
100
0
20
40
60
80
120
0
0
100 - UK GPM20
100 200 300 400 500 - L/MIN
0
33
66
99
131
164
197
230
262
40 60 80
a7.0 B
r
(100 psi)
a8.0 B
r(
)
116 psi
4 1 a. B r6 p( 0 si)
1 Ba SS RE
.4 r AIR PRE U2 ps( 0 i)
a2.7 B r0 i
(4 ps )
5.5 Bar80 p i)
(s
330 M /hr(17.6 CFM)
370 M /hr(41 CFM)
3110 M /hr(65 CFM)
3150 M /hr AIR CONSUMPTION(88 CFM)
B 50Air Operated Diaphragm Pump Range
Air valve will not stall in mid positionAir valve designed for in-line maintenanceEnd ported for improved flowPressures to 8.6 barFlow rates up to 889 litres/minuteBolted construction for greater integrityRobust construction
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
METALLIC SERIES X75
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 889 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 10 mm.
Air inlet: 3/4" BSP(F)
Temperature Limits: Determined by Elastomers
Suction Lift (Dry): 4.0 m.
Suction Lift (Wet): 5.0 m.
Fluid Inlet/Outlet: 3" BSP(F)
Installation: Surface mounted
Accessories Included: Exhaust air Silencer
Aluminium 53.5 kg.
Cast Iron/Aluminium 90 kg.
Stainless Steel/Aluminium 90 kg.
720 x 350 x 900 mm.
TYPICAL CODE = X75. 01. AA. BB. BBB
Performance curve
X75 Air Operated Diaphragm Pump Range
Metallic Series
28 www.blagdonpump.com
MODEL - X75 : ATEX approved
DESIGN LEVEL VALVE SEATSA : ALUMINIUMS : 316 STAINLESS STEELN : NEOPRENEB : BUNAE : EPDMV : VITONT : PTFE
VALVE BALLSB : BUNAN : NEOPRENEE : EPDMR : SANTOPRENET : PTFE
DIAPHRAGMSB : BUNAN : NEOPRENER : SANTOPRENEV : VITONT : PTFEE : EPDM
WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL
NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRON
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
BA
R
PS
I
HE
AD
20(34) 40(68)60(102)
80(136)
100(170)
100
80
60
40
20
00
1
2
3
4
5
6
7
120(204)
140(238)
0(6 8 B r)
1 0 PS . a
I
PS . 4 B
8 I (5 4 a
0
r)
6 P I( 4. 8 ar)
0 S 0 B
a0 P I (2 2
4 S .7 B r)
r ru
0 P (1 6 B leP e re
2 SI .3 a ) Ai In t r ss
30
20
25
10
15
5
9.1
6
7.6
3
4.5
1.5
NP
SH
R
ME
TE
RS
FE
ET
0
0
100
20
200
40
300
60
400
80 100 120 140 160 180 200 220 240
500 600 700 800 900
Liters per minute
CAPACITY
U.S. Gallons per minute
3CFM (M /hr)
422
129
60
200
257
3/4” BSPAIR INLET
1” NSPEXHAUST
149
701
298
761
16
815
327
435
577
184
305
367
62
10
SubmersibleDesigned for underground useHigh intensity spark freeRobust constructionModular construction, easy to maintainSpring loaded vanes for immediate start upPumps solid particles up to 8mmViton seal options for higher temperaturesIntegral baseplate/strainerAutomatic overspeed controlIntegral oil reservoir - automatic lubrication
Note: The above performance curve has been determined under the
following conditions: flooded suction, pumping clean water through a
calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
SUBMERSIBLE CENTRIFUGAL PUMP
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 560 Itrs/min
Max. Working Pressure: 8.6 bar
Max. Solid Particle Size: 6 mm.
Air inlet: 3/4" BSP(F)
Temperature Limits: Determined by Seals
Suction Lift (Dry): N/A
Suction Lift (Wet): N/A
Fluid Inlet/Outlet: 2" BSPT(F)
Installation: N/A
Accessories Included: None
Cast Iron 33 kg.
500 x 380 x 260 mm
Industries
MiningConstructionDe-wateringSewageWell-pointing
Performance curve
AP50Air Operated Diaphragm Pump Range
29
10
20
30
40
FLUID FLOW RATE
ME
TR
ES
HE
AD
PS
I H
EA
D
FE
ET
HE
AD
50
162
458
41
11
147
FLUIDOUTLET2” BSPT(F)
AIREXHAUST1” BSP(F)AIR INLET
3/4” BSP(M)
Ø 197 RIBBEDPUMP INLET
Ø 406 (16”) MINIMUMBOREHOLE DIAMETER
www.blagdonpump.com
Submersible Centrifugal Pump
7 B r2. a(
40 psi).
a1 4 B
r AIR PRESSURE
(20 psi)
4
r.1 Ba
6( 0 psi)
5.5 Bar
(80 psi)
6.9 Bar(10
s )
0 pi
370 M /hr(41.2 CFM)
335 M /hr(20.6 CFM)
3100 M /hr AIR CONSUMPTION(58.9 CFM)
35
30
120
25
100
20
80
15
60
10
40
520
0 0
20
50 100 150 200 250 300 350 400 450 500 550 600 - L/MIN
40 60 80 100 120 130 - UK GPM
Bespoke Products
30 www.blagdonpump.com
1” Aluminium 4 Port Pump also available in Stainless Steel, Polypropylene and Kynar
1” Industrial Stainless Steel Pump c/w Steam Jacket
1” Stainless Steel 2:1 Pump c/w Custom Flange Design
2” Hygienic on Trolley c/w Stainless Steel Trolley
1” Hygienic Pump c/w Steam Jackets
1/2” Aluminium with Stroke Counter
1” Stainless Steel 2:1 Pump
1” Stainless with Steam Jacket
4 Port Pump 1/2” Aluminiumwith StrokeCounter
2” Hygienic on Trolley
1” Hygienic
Blagdon Accessories
31www.blagdonpump.com
Maintains constant oil density with varying flow Remote installation for ease of maintenanceEnsures clean, filtered airCan be controlled independently of other equipment
Batch ControlLinkage to control equipmentGreater process control10 - 30v DC, PNP normally open
Virtually pulsation free flowsSteadier pressuresLess vibration and noiseSimple installationVariety of sizes and materialsAutomaticallyself-charging
ANSI 150 as standard - also available:-- ANSI 300- PN16- Food Industry - RJT, DIN, TRI-CLAMPEase of connections to pipework systems
Pulsation Dampener
Valve Block with Sensors
Filter Regulators
Flanges
Oil Bottle Assembly
Exclusive to Blagdon PumpRobust heavy duty designSuitable for arduous installationsSafe for underground use - no aluminium
32 www.blagdonpump.com
® ® ®ARO , Wilden and Yamada AODD Pumps
Save upto 20% on OEM prices
Replacement parts that fit
® Wilden Pumps
Replacement parts that fit
® ARO Pumps
Replacement parts that fit
® Yamada Pumps
Pumper Parts – replacement parts that fit
Pumper Parts Europe and its products are not affiliated with any of the original
equipment manufacturers referenced herein. All original equipment manufacturers’
names, colours, pictures, descriptions and part numbers are used for identification
purposes only.
! Wilden is a registered trade name of Wilden Pump and Engineering Company, a
Dover Resources Company.
! Yamada is a registered trade name of Yamada Corporation.
! ARO os a registered trade name of Ingersoll-Rand Company.
! Teflon is a registered trade name of E.I. Dupont Company.
! Pumper Parts is a registered trade name of IDEX Corporation.
BLAGDON PUMP HOLDINGS LTD.,Lambert Road, Armstrong,Washington,Tyne & Wear, NE37 1QP,United Kingdom.
Tel: 0044 (0) 191 417 7475Fax: 0044 (0) 191 417 5435Email: [email protected]: www.blagdonpump.com
Quality & Service
Global supplier of quality pump replacement parts.
Individual parts and repair kits that fit ® ® ®ARO , Wilden and Yamada AODD
pumps.
Materials include synthetic rubbers, injected-molded thermoplastics and
®Teflon .
Our products are manufactured to meet or exceed the highest quality standards in the industry. All of our parts are engineered to perform equal to or better than the original equipment manufacturer (OEM). Parts guaranteed.
Worldwide distribution networkMost parts ship in 24 hoursFree product trials available
A UNIT OF IDEX CORPORATION
33
Notes
www.blagdonpump.com
Blagdon Website
34 www.blagdonpump.com
The Blagdon website operates on a 2 click policy. This means that wherever you are within the site it will never take more than two clicks to navigate to the information you require, whether that be technical data like a manual or datasheet, or a copy of the Company brochure.
The sites purpose is to have as much information as possible available to our Customers. Detailed opposite is a chart showing some of the most frequently asked questions and where the answers can be found.
Also shown within the web pages are:
Chemical Resistance Charts
Kit Revisions
Index with Components and Drawings
Viscosity Correction Curve
Flow Rate Conversion Calculator
Shipping Weights and Dimensions
Blagdon Numbering System
Products
Applications
Materials
About Our Pumps
About Blagdon Pump
Blagdon News
Distributors
Literature
Technical Details Troubleshooting Installation
A unit of
Contacts
Brochure
Brochure available online:
Brochure available to downloadTo view the brochure online go to – LITERATURETo order additional copies go to – OTHER ENQUIRIES
Quarterly Newsletter
Features include:
Engineering updatesNew Legislation issuesCurrent standards – Atex, EHEDG, ISO, IIPProject updatesProduct updatesFuture productsTechnical adviceTo view this online – go to BLAGDON NEWS
www.blagdonpump.com
Pakistan
Singapore
Thailand
UK
Indonesia
Latvia
Philippines
South Africa
Turkey
USA
Italy
Malaysia
Poland
Spain
UAE
Japan
Netherlands
Saudi Arabia
Sweden
Venezuela
India
Korea
Norway
35
GLOBAL NETWORK
At Blagdon we are committed to providing our Customers with an exceptional product.Along with our global network of Distributors, will endeavour at all times to provide unrivalled customer satisfaction.
To find your local Distributor click on DISTRIBUTOR from the home page.
Finding the pump you want couldn’t be easier...
Product Literature
Product specific literature is available which includes:
Technical dataPerformance curvesApplicable industries/applicationsAvailable optionsTo view this online go to – LITERATURETo order additional copies go to – OTHER ENQUIRIES
Worldwide Distribution
Australia Austria Belgium
Denmark
Germany
Eire
Hong Kong
Columbia
Finland
Hungary
Czech Republic
France
Chile ChinaCanada
How do I get a quotation?
Go to Contacts
I’d like to speak to a member of staff
Go to Contacts
I’d like to download some sales material
Go to Literature
I’d like to download some technical information
Go to Technical Details
Can the pump handle my process?
Go to Technical Details
What options do I have?
Go to Products
How does an air operated pump work?
Go to Blagdon Pump Tutorial
Why use an air operated pump?
Go to About Our Pumps
Other Enquiries Links
Home Sitemap Website FAQ's Website Feedback
BLAGDON PUMP(EUROPEAN PUMP GROUP)
Lambert Road, Armstrong, Washington, Tyne & Wear, NE37 1QP, UK.Tel : +44 (0)191 4177475 Fax : +44 (0)191 4175435
E-mail : [email protected] Web : www.blagdonpump.com
BLAGDON APG(ASIA PACIFIC)
IDEX Asia Pacific Pte. Ltd63, Hillview Ave. #7-08
Lam Soon Industrial BuildingSingapore 669-569Tel : +65 6314 6131Fax : +65 6764 4020
E-mail : [email protected] : www.blagdonpump.com
LOCAL DISTRIBUTOR
www.blagdonpump.com
BLAGDON LAPG(LATIN AMERICA)
Hegel 153-602 Colonia Polanco11560 Mexico D.F. MexicoTel : +52 (55) 5255 1357Fax : +52 (55) 5255 1356
E-mail : [email protected] : www.blagdonpump.com