TECHNIC AL DATAT. +39 0 5 1 67 8 6 811 – FIAC@FIAC . IT – W W W.FIAC . ITFIAC
/// AIRBOK 203 BDBelt drive
///AIRBLOK BD SERIES
Belt drive super silent rotary screw air compressors
FIAC rotary screw compressors of the AIRBLOK BD 73-602 series are characterised by a belt driven trasmission between the electric motor and high performance air end with opti-mal rotation speed.
The cast-iron conical coupling pulley ensure the transmission stability, low mechanical stress and easy maintenance opera-tions.
The excellent layout of the easy maintenance the effi ciency of the forced ventilation system ensure the heat exchange as well as making maintenance quick and economical thanks to the easy access guaranteed by a system of mobile panels equipped with safety locks.
During the design phase, deep attention was given to make simple machine installation.
///TECHNICAL FEATURES
“Cutting-edge technology and energy saving”are the concepts behind AIRBLOCK BD 73-602 rotary screw compressors series. Fiac advanced solutions are used in a wide range of sectors and include:
- Superior, speed-controlled Fiac air end which ensures high capacity and effi ciency- Reliable belt transmission, simple to be tightened and vibration-damped - Effective cooling. Standard response to ambient temperature- Oil/air separation advanced system featured by reversal of fl ow direction- Environmentally friendly: oil mist remover and drain valve installed as standard equipment- User-friendly electronic control system: easy to understand and offering maximum operating control.
2 TECHNIC AL DATAT. +39 0 5 1 67 8 6 811 – FIAC@FIAC . IT – W W W.FIAC . IT
Type Code LxPxH
EAN CODE dB (A) l/min CFM m3/h bar psi BSP HP kW mminkglb
AIRBLOK 203 BD
4152026232 on request
67
2330 82.3 139,8 8 116
3/4” 20 15 1065x615x107041.9x24.2x42.12705954152026233 on request 2110 74.5 126,6 10 145
4152026234 on request 1690 59.7 101,4 13 188
AIRBLOK 203 BDBelt drive
Belt drive super silent rotary screw air compressors
Standard input 400V/50Hz/3 - 230V/50Hz/3 - 230V/60Hz/3 - 208-230-460/60Hz/3 - 575/60Hz/3 - 380-440/60Hz/3
106541.9
1070
42.
1
61524.2
3TECHNIC AL DATA T. +39 0 5 1 67 8 6 811 – FIAC@FIAC . IT – W W W.FIAC . IT
///High effi ciency compression unit
///Belt transmission
///Effi cient cooling systemand ventilation
///Optimized separation system:3 stages
///Powerful radial electrofan
In-house designed air end with optimal selection of lobe quantity,
type of profi le and rotor dimensions grant:
• High compressed air capacity.• Optimum rotors speed.• Long lived and effi cient bearings.• Very high reliability.
Separation oil/air by centrifugal
force in the separator tank.
Gravitational separation through
reversal of fl ow direction.
High effi ciency coalescent in
cartridge.
Simple belt tightening by turning
the screws (AIRBLOK BD 703-403).
Guided sliding along plate.
Manual belt tensioning (AIRBLOK BD
502-602).
Quick and safe belt maintenance.
Aluminium cooler with large radiating surfaces.
Ventilation system keep the fl uid dynamic circuits correctly cooled.
Removable fi ber crossed pre-fi lter for easy cleaning.
Limited outlet compressed air temperature respect to ambient
temperature.
Silent.
Powerful.
High prevalence.
High air exchange inside the cabinet.
4 TECHNIC AL DATAT. +39 0 5 1 67 8 6 811 – FIAC@FIAC . IT – W W W.FIAC . IT
///Fiac Air Energy Control 3Microprocessor of robust architecture safe and reliable.Management and total control of the compressor operating parameters.LCD display Instantaneous parameters displayed during operation:
• Working pressure• Oil temperature• Max. and min. pressure setting.• Intelligent unload cycle management.• Organizer: program of daily working cycles and periods of inactivity.• Programmed maintenances schedule.• Remote Start/Stop.• Warning and stop alarms display and memorization.• Management of multiunits plant: feature MASTER / SLAVE.
///Electric componentsHigh effi ciency motor IE3.Protection class IP55, insulation Class F.Ventilated control cabinet.
5TECHNIC AL DATA T. +39 0 5 1 67 8 6 811 – FIAC@FIAC . IT – W W W.FIAC . IT
///DIMENSION DRAWINGS
◄
◄
◄
◄
▲ ▲ ▲
◄
◄
◄
◄
38
368
300
336
54 404
135
948
600
93235 235210 210175
636
20
508
2981065
615
435
665
1070
45 30
1095
25
Air deliveryFemale 3/4” BSP
Electrical DRYERcable entry
Electrical Compressorcable entry
Center of Gravity
Automatic Drain Pipe 14 x 10 mm
Cooling Air Inlet
Cooling Air Outlet
Cooling Air Outlet
CoolingAir Inlet
6 TECHNIC AL DATAT. +39 0 5 1 67 8 6 811 – FIAC@FIAC . IT – W W W.FIAC . IT
In designing our rotary screw compressors we have take particular care in choising of fi rst quality components end sure realiability, and more over all internal parts are easely accesible to be easier substitution during ordinary and extraordinary maintenance operation.Only thanks throught knoledge of the technology, investiment in monitoring equipment and update training of our tecnicians at FIAC headquarter in Pontecchio Marconi, with our partner in Italy and all over the world, we can offer to the FIAC screw compressors users the most appropriate service and assurance your system operating at peak effi ciency for a choice that lasts over time extending the compressors lifetime your assurance off quality require only original part FIAC, that these components passed the specifi c severe test of quality control to obtain the highest level of protection and keeping the cost of ownership to the absolut minimum.
1 oil fi lter, 1 air fi lter, 1 oil separator fi lter
Type Cod.
FILTER KIT AIRBLOK 203 1124090629
Filter kit for Airblok
* 2 taniche da lt. 10 / 2 x 10 lt. cans of oil
1 oil fi lter, 1 air fi lter, 1 oil separator fi lter, can / cans of mineral oil
Type Cod.
FILTER KIT + OIL AIRBLOK 203 * 1124090637
Filter kit + oil for Airblok
///CUSTOMER CARE, SERVICEAND MAINTENANCE
///Maintenance kit for AIRBLOK