INTRODUCING THE AIR CONDITIONING

ENERGY SAVER

SAVEAIR TECHNOLOGIES PRIVATE LIMITED ,CHENNAI

AUTHORIZED DEALER FOR AIRCOSAVER ENERGYSAVER

Saveair TechnologiesSaveair Technologies

Save Up to 30%on your air conditioning running costs

Air conditioner Energy saver

Saveair TechnologiesSaveair Technologies

Specially designed for:Specially designed for:•Air conditioner unitsAir conditioner units

Saveair TechnologiesSaveair Technologies

How it worksHow it works1: Room air (return air) is passing the fan(2) Through the coil(3) And is converted into cold supply air(4)when the Energy Saver is running it will switch off the compressor and using all latent cooling availablewhen the room thermostat is satisfied the compressor will stop

Sensor

compressor

2.Fan 3.Coil 4.Supply air

1: room air (return air)

Saveair TechnologiesSaveair Technologies

Improving energy efficiency is the best Short-term answer to today’s energy problems

Until cleaner and sustainable sources of energy become available on a largescale, improving the energy of today's systems is the best way to reduce co2 emissions and save energy.And the Best thing is every one can contribute.

Saveair TechnologiesSaveair Technologies

Air conditioning has a huge potential for efficiency improvements

Air conditioning is one of the largest energy consumers in the residential and industrial sector. Thousands of air conditioners put high demand on the electricity networks. On a smaller scale, air-conditioning probably accountsfor a significant part of your energy bill.

Many existing air conditioners use old and quite inefficient technology.Although improved technology has become available in more expensive Systems (eg:Inverter technology), the pay back time of these systems isstill very long.

Instead of investing a lot of money into an expensive new system,there is an easy and affordable way to improve the energy efficiencyof your unit upgrade It with an air conditioner energy saver .

Saveair TechnologiesSaveair Technologies

How does the Aircosaver work ? Short comings of typical Ac systems:

When switched on typical air conditioning system operate continuously until the Room thermostat senses the desired temperature and turns the system off.As the rooms warms up the thermostat switches the air conditioner back on and the cycle repeats. Air conditioning systems are usually dimensioned to cope with the extreme cooling demands of the few hottest days of the year (plus a safety margin). How ever in most operational conditions, this maximum output is not required and the system is over sized. so running the system continuously until the room thermostat switches it off that the system operates with the excess capacity most of the time.

A typical cooling cycle with excess capacity looks like this : When the cycle starts, the compressor pushes cooling energy in to the heat exchanger which acts an energy storage. At this stage systems works with high efficiency because compressors operate most efficiently when fully loaded.In normal weather conditions, the energy storage is soon fully “charged up” .From this point onwards ,The compressor provides more cooling energy than the heat exchanger can take up (Thermodynamic Saturation). Running the compressor beyond this stage does not increase the cooling effectany more. Its just a waste of energy!

Saveair TechnologiesSaveair Technologies

The Air conditioner energy saver compensates these short comingsand adds intelligence to your Ac systems.

This is where the Energy Saver cuts in. Its sensor driven software algorithms are designed to detect thermodynamic saturation and to optimize the compressorAccordingly. When over capacity is detected, the aircosaver switches the compressor off and avoid inefficient overcooling.

Your unit switches into “saver mode". The fan keeps running and your system makes maximum use of the stored cooling energy in the heat exchanger once the stored energyis used up the compressor can work efficiently again and is switched back on.

The set room temperature is reached without the inefficient parts of the cooling cycle.This results in significant energy savings without compromising cooling comfort.

Since the correct point to switch the compressor varies from unit to unit and changes with different weather conditions, the aircosaver is constantly adapting is setting to ensureEfficient operation of your air conditioning systems at all times .

Saveair TechnologiesSaveair Technologies

Benefits using the AircosaverBenefits using the Aircosaver Saving up to 30% on your energy billSaving up to 30% on your energy bill Saving energy 24 / 7Saving energy 24 / 7 Contributing to a healthier living environment (sick building syndrome)Contributing to a healthier living environment (sick building syndrome) Expanding the lifetime of your compressorExpanding the lifetime of your compressor Helps prevent icing of compressorHelps prevent icing of compressor Ensuring a more steady comfort temperatureEnsuring a more steady comfort temperature Payback time can be in months* Payback time can be in months*

Saveair TechnologiesSaveair Technologies

2. Output (Relay)Contact function : NO (Normally Open)Switching voltage : 24 V AC to 230 V ACMax. switching current : 12 A continuously / 120 A temporarily (20ms) at 250V switching voltageAnti-short cycle protection : 3 minutes (1 minute upon power-up)3. Operating conditionsOperating temperature : min. 0°C, max. 55°CRelative humidity : min. 15%, max. 90%No Condensation

Type 1Type 1 Type 2Type 2Input voltageInput voltage 230V AC (+/- 10%)230V AC (+/- 10%)

50 / 60 Hz50 / 60 Hz24V AC (+/- 10%)24V AC (+/- 10%)50 / 60 Hz50 / 60 Hz

Max. current Max. current consumptionconsumption

15 mA15 mA 90 mA90 mA

1.Operating Data

Saveair TechnologiesSaveair Technologies