OAKLEAF INVESTMENT HOLDINGS 52 (Pty) ltd
is by contract the exclusive import agent and service provider in South Africa for various foreign specialist
manufacturers of
FIELD PROCESS MEASURING AND CONTROL EQUIPMENT
COMPRESSED AIR TREATMENT
OVERPRESSURE PROTECTION
VALVES AND REGULATORS
REV. 06.10.14
Insertion Multivariable Vortex
Flowmeter for measuring mass,
Temperature,density and
Pressure
Measures most gases, liquids and
steam
PanaFlow™ MV82
1
Features
•Accuracy 0.1% of reading
• Isolated from upstream flow
disturbances
• 40:1 or better turndown ratio
Pana portable PT878
The Z3 ultrasonics
Reliable, accurate and cost effective
• Economical non-intrusive flow
measurement
• Simple setup and installation
• Suitable for wide range of pipe sizes
and materials
• Suitable for lined pipes
• Two-channel/two-path version
available
• Velocity, volumetric and totalized
flow
• Internal keypad for field
programming
• Small, lightweight and easy to use
• Non-intrusive flow measurement
• Velocity, volumetric and energy flow rates
• Totalized flow and trend data
• Large, backlit LCD display
• Alphanumeric and graphic formats
• Multiple-language user interface
• Rechargeable battery pack
• Logs over 100,000 flow data points
• Submersible package
• 32 site locations
• Optional thickness gauge • Optional energy measurement
• Suitable for most pipe sizes and materials, including
lined pipe
• Three path, industrial designed flow-
cell
• Transducers replaceable in the field
without process shutdown
AT868 Panametrics
Liquid flow
Ultrasonic
Transmitter
LCT custody transfer measurement
Advanced Modular Calibrator • One Touch selection of common
tasks, e.g P to I for a pressure
transmitter
• Highest accuracy for measuring,
sourcing and simulating electrical
frequency, temperature and
pressure
• Simulate device inputs and
measure outputs simultaneously (
up to 6 active channels)
• Calculates errors between inputs
and outputs
• Pressure system generates 100
bar/1500 psi pneumatic and 1000
bar/15000 psi hydraulic pressures.
• Interchangeable pressure modules
from 25mbar/ 10 in H20 to 1000 bar/
15000 psi
The new Druck DPI 620 Genii is the
world’s first multifunction calibrator
with swipe technology. Your touch with
our technology makes it faster, simpler
and easier to improve productivity.
Smart interface with swipe and touch
commands
Full HART and Fieldbus capability
WiFi, Bluetooth and USB connectivity
Document library with file and image
viewers
Free library and software updates
Calibrate, Communicate, Integrate
2
The new DPI 611 builds
on this legacy to
provide a highly
dependable, quick and
simple solution to
streamline your
pressure maintenance
and calibration
routines…
Pv411A Multi-Function
Four-in-one High
quality field proven
pressure and vacuum
hand pump
DPI 800/802 series pressure indicators
DPI812-RTD Loop calibrator
DPI 822 Thermocouple Loop calibrator
DPI 832 Electrical loop calibrator
DPI 842 Frequency Calibrator/Loop
calibrator
DPI 880 Multi-Function Calibrator
UPS III Loop calibrator
UPS-II Smart Loop Calibrator
for milliamps
UPS-III-IS Loop calibrator
DPI 705 series handheld
pressure indicators
DPI 740 Series Precision
Pressure Indicator
DPI 104 Digital
test gauge,
DPI 104 IS Digital
test gauge-
intrinsically safe
3
Features
• Ranges from 70 mbar (1 psi) to 700 bar (10,000 psi)
• Accuracy to ±0.04% Full Scale (FS) Best Straight Line (BSL)
• Stainless Steel construction
• Frequency response to 3.5 kHz
• High over pressure capability
• Hazardous Area certifications
• mV, mA, voltage and configurable voltage outputs
• Multiple electrical & pressure connector options
• Operating temperature ranges from –55 to 125°C(-67 to 257°F)
Portable Hygrometers
Moisture Transmitters
Moisture Analyzers
PM880 AC
This Rugged, line-powered,
portable hygrometer measures
moisture in gaseous and non-
aqueous liquids
Dew.IQ Single
Channel Hygrometer
-combines our
technologically
advanced M series
moisture probe with
state of the art
electronics for superior
speed of response,
stability and overall
performance.
Hygropro is a loop-
powered, intrinsically
safe moisture
transmitter for
measuring the moisture
content in gases and
non aqueous liquids
DewPro MMY30
Is a loop-powered
dew point
transmitter for
analyzing moisture
content
Aurora TDLAS Moisture Analyzer
Utilises tuneable diode laser
absorption spectroscopy to
measure moisture in natural gas
rapidly and accurately
Aurora Trace HDLAS Moisture
Analyzer
uses high definition laser
absorption spectroscopy, or
HDLAS, to provide a sharper
signal with more precise detail
for measuring trace amounts of
moisture in liquefied natural gas.
4
Features
•Up to 6 channels of moisture measurement
•Each channel can include optional pressure, temperature, oxygen, and
other analog inputs
•Calibrations traceable to national standards
•Rack, bench, and panel versions available now and weatherproof and
explosion-proof configurations available soon
•Computer-enhanced response software for abrupt dry-down applications
•Real time touch screen display of six or twelve parameters simultaneously
•Displays trace measurements in the most common moisture measurement
units
•Built-in data logging
•USB port for data handling and instrument program updates
•Digital capabilities including Ethernet, Modbus, and RS232/485
The New Moisture.IQ
Moisture Analyzer
Industrial Relative Humidity
Chilled Mirror Hygrometers
Moisture Probes
Optica
The Optica chilled Mirror
Hygrometer offers
precision dew point
measurement
OptiSonde
The OptiSonde chilled mirror
Hygrometer offers precision
humidity and temperature
measurement
DewPro MMR101
high temperature
loop-powered
moisture and
temperature
transmitter
DewPro MMR30
This compact, mid
range moisture
transmitter probe is
designed specifically
for refrigeration dryer
monitoring
DewPro MMR31
This loop powered
mid range moisture
transmitter
represents a simple,
cost effective
solution for mid-
range moisture
measurement
Calibration Systems
Humilab
This humidity
Control chamber
is an NIST
traceable
relative humidity
calibration
system.
M Series
These moisture probes
are coupled to
Panametrics hygrometer
consoles by an
interconnecting cable.
TF Series
This three function
probe measures
pressure and
temperature, in
addition to moisture
content
MIS Probe
This aluminium oxide
moisture probe is
designed to be used in
conjunction with the MIS 1
Analyser, MIS 2 Analyser
and PM880
Panaview
This Instrument
interface software
allows access to many
product features from
your computer
Software
5
6
XMTC thermal
Conductivity Analysis
380 SERIES
PORTABLE TRI/QUAD GAS
ANALYZER FOR HYDROGEN/
CARBON DIOXIDE/AIR (CAN
INCLUDE A DEDICATED
OXYGEN CHANNEL(MODEL
382K))
FEATURES • MONITORS 0-100% H2 in air, 0-100% H2 in
CO2,0-100% Air in CO2,0-25% O2
• Rechargeable battery operation
• Weatherproof(WP) cabinet with clear Lexan
cover
420 SERIES CONTINUOUS PROCESS
CARBON DIOXIDE ANALYZER
FEATURES • Infrared Technology
• Available in explosion
proof version.
O2X1/ OXY IQ
Proven Galvanic fuel
cell O2 sensor
technology for
continuous monitoring
Benefits
• Optimized reaction
processes
• Improved efficiency
and increased
process up-time
• Greater safety
assurance
• Reduced total cost
for hazardous area
locations
• Remote monitoring
Thermoparamagnetic
Oxygen analysis
This sensor provides the
most stable and drift free
measurement available on
the market today.
Measures gases such
as H2, CO2, CH4, He
and argon by thermal
conductivity
Features • ― Real level‖ measurement not affected by
media variables - Dielectrics, pressure,
density ,pH , viscosity…
• Easy bench configuration- no need for level
movement
• 2-wire loop powered intrinsically safe level
transmitter
• 360 rotatable housing can be dismantled
without depressurising the vessel via ―quick
connect/disconnect‖ probe coupling.
• Probe designs: up to +450 C/430 bar(842
F/6250psi)
• Saturated steam applications up to 155 bar
@+345 C (2250 psi @ +650 F)
• Cryogenic applications down to -196 C (-320
F)
• Integral or remote electronics
• Suited for SIL 2 or SIL 3 Loops (full FMEDA
report available).
• Internal reference signal physically and
electrically separated from tank and media
• Improved pulse amplitude and superior
signal-to-noise ratio.
• 4-button user interface and graphical LCD
display provide enhanced depth of data
indicating on screen waveforms and
troubleshooting tips.
Guided Wave Radar
7
• High performance, Low
power
• Dual Compartment design
• Superior signal
performance
• Overfill capable probes
• Convenient pre-
configuration
Eclipse 705 7M1
Single Flexible
Liquid
Eclipse 705
7MS Steam
Eclipse 705
7MB
TwinRod
Eclipse 706
Coax
Eclipse 706
Enlarged
coax
Eclipse 706
Single Rod
Eclipse 705 7MT
Enlarged Interface
Eclipse 705
7MG Cage
probe
Switches
Buoyancy
Top mounted level control
8
Tuffy
Floating Roof
Displacer Displacer-
A15HollowBrass
Thermatel TD1
Twin Tip
Thermatel TD2
Spherical
Echotel 961
Flange
Echotel 962 Thread
Other Level Transmitters
9
E3 Modulevel in Cage
E3 Modulevel
Kotron 805
R82 (Lexan Housing) R82 extended
Pulsar Horn
Magnetostrictive
Jupiter - Principle of
Operation with liquid3
fly ash
Thermal Dispersion
10
TA2 (Active Display
Sensorview)
Features Direct mass flow measurement of air and gas
Excellent low flow sensitivity
Process temperatures to +400°F (+200°C)
Rotatable housing
FM/FMc/ATEX approvals
Resettable and non-resettable totalizers
FEATURES • Temperature compensated to provide repeatable
alarm under varying process temperatures
• Continuous diagnostics detect sensor fault
• Detects minimum flow or presence/absence of flow
• Easy/fast calibration
• Excellent low flow sensitivity
• Optional hot tap available (see bulletin 41-103)
• Hygienic design available
• NACE construction available (consult factory)
• Process temperatures from -100° to +400° F (-73° to
+204° C)—High temp. version to +850° F (+454° C)
Flow Switches
• Certified according to MID ( European
Metrology certificate) and OIML R49
• Designed in observance od=f standard
EN14154
• Intended for measurement of clean water and
substitution of mechanical water meters
WOLTMAN Type
• Intended for diagnostic of general condition of
water network and water leakages in piping
• They can measure instantaneous flow rate in
consumption of water pressure
• They don’t have any moving parts
• They have very low pressure losses
11
12
Flonet FN20XX.1
• Flow-rate and volume measurements
electrically conductive liquids
• Dimensions DN 6 to DN1200
• Maximum pressure PN 40
• Maximum temperature of measured
medium 150C
• Measurement accuracy +/-0.2%
• Communication RS 485, electrical
outputs
Flonet FS10XX
• Flow-rate and volume
measurements electrically
conductive abrasive liquids and
mixtures
• Dimensions DN100 to DN 200 –
wafer
• Dimensions DN250 to DN450 –
flanges
• Pressure PN 10 and PN 16
• Maximum temperature of
measured medium 150C
• Accuracy of measurement +/-
0.5%
• Communication Hart, foundation
field bus, electrical outputs
Water Meters
Powogaz SA –
Turbine Water Meters
Powogaz SA –
Single-Jet Water Meters
13
Flow Sensors
• Low velocity flow rates
• High accuracy: to ± 0.50%
• Repeatability: ± 0.050%
• Verified flow coefficients
• No calibration required
• Extended turndown
• No straight run requirements
• Low permanent pressure loss
• Mass or volumetric flow
AF Flanged
Model Manifold
head
Weld neck
RF flange
Retaining
plate
Packing follower
Graphite packing
Accelabar flow nozzle
Transmitter
Verabar
• Improved accuracy and turndown
• Eliminates clogging of sensor ports
• Superior signal stability
• Low drag – flow-induced vibration
• 5-year performance warranty
14
RTD
(optional)
L
AF Flanged
Model
Spring-Lock
Visual load
indicator
Compensates
for changes in
pipe diameter Spring
travel
Drift Model
Designed for
simple mounting
on drift/tunnel
wall with plastic
or steel, pan &
tilt sensor
mounts
IDM Model
Gasketed, non-corrosive
sensor assemblies adapt
easily to any rigid, square
or round ducting
Fan Model
Rugged stainless steel construction
and non-corrosive materials ensure
sensors resistance to large fan
vibration, noise and outside elements
Gas Sensors
• Humidity
• Dew point
• Wet Point
• Pressure
• Temperature sensor 15
Magnetic switches in
various executions
Diverse float types are
available for many
different applications
Typical Weka
VLI Standard,
type 34300-K
(PN28)
MANUFACTURED IN
SOUTH AFRICA
UNDER LICENSE
Visual Level
Indicator (VLI)
Transmitters for electronic
indication
Petro-VLI-
Our solution
for your
petrochemic
al oil and
gas
applications
Tank Level
Instrument (TLI) in
Modular design.
16
Temperature
and Humidity
Sensors
Indicators
Controllers
Programmable
Controllers
Signal
Converters
Recorders
Servo
Controllers
Thyristor
Controllers
17
Transmitters & Controllers
42
Sanitizer & Water Analyzers
Dissolved Oxygen Measurement
PH, ORP, Turbidity, Specific Ion, Conductivity, Water Analyzers, Dissolved Oxygen
Sensors
ECD Manufactures a family of transmitters, controllers, and analyzers for multiple measurement parameters. The T23 Transmitter is a loop powered 4 to 20 mA general
purpose instrument. The Model T28 is a loop powered 4 to 20 mA Transmitter used in hazardous locations. The C22 controller is a programmable instrument with
numerous control functions.
18
PRESSURE &
TEMPERATURE
SWITCHES
19
Small Bore Flow measuring
instruments
Electronic measuring and calibration
instruments
20
Condition Monitoring and
Protection Solutions
21
System 1 Software
Condition Monitoring and
Diagnostics
3500 Series
Machinery Monitoring
and Protection
2300 Series
Vibration Monitor
ADAPT* Series
Advanced Distributed
Architecture Platform
Technology
SCOUT* and
COMMTEST*
Series
Portable Data
Collection and
Analysis
But it all starts with the proper
transducer...
From the early days when Don Bently
pioneered the first
commercially successful use of Proximity
Probe systems(for direct rotor vibration and
position measurements within journal bearing
machines)—to the application
of accelerometers and Velomitors to measure
casing vibration on rolling element bearing
(REB) machines—
Bently Nevada has installed more than 2
million sensor points worldwide.
Fibre Glass FIELD
MOUNTED
PROTECTION
BOXES &
ASSESORIES
Laminated Fibreglass
Pre-pigmented Gel Coating
Toughened Glass front Window
Lockable Stainless Steel Catch
Open Safety Latch
Corrosion resistant
Weather, Hose & Dust Proof
Suitable for Purging
Impact Resistant
Versatile Mounting
Mounting Yoke NIC-A1
Mounting Post NIC-A2
Mounting Pillar Large NIC-A3D
Mounting Pillar Medium NIC-A3E
Mounting Plate Large NIC-A4
Mounting Plate Medium NIC-A4B
HOT DIPPED GALVANIZED
MOUNTING ACCESSORIES
22
NIC-BX4 NIC-BX1
370W x 330D x 430H 500W x 500D x 640H
25
Duolok stainless steel tube
fittings feature low-torque, two-
ferrule design provides fast and
reliable leak-tight connections,
even in systems having high
vibration or rapid temperature
and pressure
fluctuations. They are
designed and manufactured to
interchange
and intermix with Swagelok®
tube fittings.
Unilok stainless steel tube
fittings single-ferrule
design provides fast and
reliable connections in
analytical and process
instrumentation systems
and system and process
systems. They are designed
and manufactured to
interchange and intermix
with Parker® CPI tube
fittings.
Griplok stainless steel tube
fitting’s two-ferrule design
provides leak-tight reliability in
instrumentation and control
systems, and process
systems. They are designed and
manufactured to interchange and
intermix with Hoke Gyrolok®
tube fittings.
Complete range
of Flolok Valves
consisting of small
bore, ball, needle,
check, plug, and purge
valves, as well as
quick connect
couplings, Tee type
and Inline filters
TruFit® pipe fittings, weld
fittings, and adapter fittings
are designed and
manufactured to
provide reliable connections
in instrumentation and
process piping
systems. Brass, Monel®,
Hastalloy-C®, and stainless
steel pipe fittings are
standard. Other alloys are
available on request.
USA Based company SSP manufactures stainless steel
tube fittings, pipe fittings, valves and other
instrumentation products that meet all industry standards
while significantly improving the user installation and
replacement process. Our goal is to be the installer’s
supplier of choice.
GUARANTEED
FULLY
INTERCHANGEABLE
AND
INTERMIXABLE