CO
RB
IN R
US
SW
IN C
OR
BIN
RU
SS
WIN
CO
RB
IN R
US
SW
IN
Visit us on the web at www.akronhardware.com
1-800-321-9602Fax 1-800-328-6070
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
Cylinders and Components2
Available Finishesfrom Stock
See page 3 foravailable finishes.
How to Order Cylinders
TYPE/MECH/FUNC LENGTH CAM PINS KWY. FINISH* * *
1000 2000 MTSE A01 5 SEE 6051001 2003 100 A02 6 CHART 6121010 2010 118 A03 BELOW 6131070 2200 114 A04 6191080 3000 138 A05 6251300 3010 112 A21 6261303 3070 RIM TAIL1400 3080 178
8000 2008010 312
CYLND.001033034039044052
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN3
Cylinders and Components
Keyways Available
27• 59A1• 67A1• 852• H3• N6• N18• BL27A1 59A2• 67A2• 981• H4• N7• N19• BR57A1• 59B1• 67B1• 982• H5• N8• N20•57A2 59B2• 67B2• 983• H6• N9• N21• HIGH SECURITY57B1• 59C1• 70 D1• H7• N10• N22• 59A157B2 59C2• 77• D2• H8• N11• N23• 60•57C1• 59D1• 77A1• D3• N1• N12• N24• 7057C2 59D2• 77A2• D4• N2• N13• N25• D1•57D1 60• 77B1• L1• N3• N14• N26• L4•57D2 67• 77B2• L2• N4• N15• N27•
97 L3• N5• N16• N28•99 L4• H1• N17•
H2•• DENOTES STOCK
INTERCHANGEABLE CORE KEYWAYS
Unless otherwise specified, cylinders will be furnished "0" bitted x 2 blank keys. “keyed random” cylinders are available in more popular keyways (i.e. “60”, “D1”, and “L4”) at no extra charge.
Waldes Tru-Arc Pliers
No. CT-25When rekeying or exchanging cylinders in CK4200 and UT5200Series knobs, this tool is used to remove the large knob shank retain-ing ring to gain access to the cylinder.
No. CT-26When rekeying CK4200 and UT5200 Series cylinders, this tool isused to remove the plug retainer.
No. CT-27When rekeying or exchanging cylinders in UT5200 Series Unit Locklever handles, this tool removes and installs the cylinder retainingring.
No. CT-93 Cylinder Tool KitKit No. CT-93 contains the following items.
CT-4 Follower for 509" diameter plugsCT-10 Loading tool for CK4400 Series and IC cylinder shellsCT-11 Key gauge for Corbin X and Z Class System 70 and pre-
System 70CT-19 TweezersCT-21 Key gauge for Russwin N Class System 70 and pre-
System 70CT-22 Key gauge for Russwin DH Class System 70 and pre-
System 70CT-23 Key gauge for Russwin 981 and 852 ClassesCT-26 Waldes Tru-Arc pliers (see above for full description)CT-54 Follower for .552" diameter plugs
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
4 Tools, Key Blanks and Components
Call our Sales department - toll free - for current pricing on all Corbin Russwin products
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN5
Tools, Key Blanks and Components
No. CT-80 Cylinder Installation WrenchCT-80 is for interchangeable core mortise cylinders. It is used to:• Install and remove Corbin Russwin interchangeable core mortise
cylinder housing without marring cylinder scalp finish.• Test cam operation before fastening the mortise cylinder set
screw.• Align the pins of the throw member before installing the core.
Key BlanksCorbin Russwin key blanks are furnished standard in nickel silver.Brass key blanks are also available in the most popular key sectionsto provide original Corbin Russwin quality at an economical price.
No. CT-27When rekeying or exchanging cylinders in UT5200 Series Unit Locklever handles, this tool removes and installs the cylinder retainingring.
No. D1-6 PIN-51 Large BowBlank both sides. Recommended for special die stamps or largeamounts of stamping, and for Control and Emergency Master Keys.
Conventional Pins• Pins are packaged in a secure, spill-proof plastic vial
with hinged top.• 12 vials per master carton.
Security Pins
SECURITYCONVENTIONAL
SECURITYBLANK
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
6 Mortise Cylinder Cams
Cams for Current products or Models
Type Part No. Brand Model/Description
A01 701F23 Corbin Russwin Steel case mortise locks except classroom function. Deadboltfunctions of green cast iron case mortise locks. NOT formaster ring mortise cylinders.
Arrow, BestMarks 5000, PDQ All mortise functions using cloverleaf cam.
A02 Reg. 147F77 Corbin Russwin Classroom (55) function and inside of vestibule (42) functionIC 334F13 steel case mortise locks. Most exit device trims. NOT for
master ring mortise cylinders.Baldwin All mortise locks.R. R. Brink All except CKS.Marks 7000, 9000 and most brands of older black cast iron locks.
A03 Reg. 111F55 Corbin Russwin DL3000 Series Cylindrical Deadlocks only.IC 362F42 Adams Rite 1800 Series, 4015 Deadlocks; 4500 and 4700 Series Latch
Locks.Lori 4500, 4600 Series Deadlocks
A04 Reg. 413F22 Corbin Russwin DL4000 Series Mortise Deadlocks only.IC 423F49
A05 Reg. 105F70 Adams Rite 4070 Series Deadlocks.IC 362F50 R. R. Brink “CKS” Control Key Switch
A06 Reg. 701F558 Corbin Russwin Schlage L9000 Series Mortise Locksets that acceptIC 626F078 cloverleaf cams.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN7
Mortise Cylinder Cams
Cams for Current products or Models
Type Part No. Brand Model/Description
A65 Reg. 25F72 Corbin Russwin ML2200 Series: required for master ring deadbolt functionsmanufactured before June 10, 1993 (gold case) and foroutside of current vestibule (42) function. Optional for current non-deadbolt functions except classroom (55) andinside of vestibule (42) function.
A92 Reg. 266F34 Corbin Russwin Concealed vertical rod exit device outside grip handle operators 01 and 02.
Cams for discontinued Corbin Russwin products or models
Type Part No. Brand Model/Description
A63 Reg. 121F01 Corbin Russwin Black cast iron case master ring mortise locks, except models with 1" throw deadbolt.
A93 Reg. 281F27 Corbin Russwin 610 and 1403 Series Cylindrical Deadlocks.
For Corbin Russwin, Available For Immediate Shipment, See Our Manufacturers Parts Section.
Designed for high-traffic commercial, institutional,industrial and government buildings where security isof the greatest concern.• Patented (6,349,982) quick-reversible feature enables
users to reverse hands without disassembling lockcase.
• Provides life safety and security in a single door prep,saving the additional cost of a deadlock.
• Throughbolted trim designs for proper alignment andincreased security.
• Can be used with new or existing Corbin Russwin keysystems and those of most other manufacturers.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
8 ML2000 Series Mortise Locksets
Features Include:
• Handing: Handed; quick reversible.• Door Thickness: 1-3/4" (44mm)- standard.• Backset: 2-3/4" (70mm).• Lock Case: Heavy gauge chrome-plated steel, 5-7/8" (149mm) x 4" (102mm) x 15/16"
(24mm).• Front: Heavy gauge steel, 8" (203mm) x 1-1/4" (32mm) x 3/32" (2mm). Accommodates
flat doors and doors beveled 1/8" (3mm) in 2" (51mm).• Latchbolt: 2-piece mechanical with anti-friction insert, 5/8" (16mm) x 1" (25mm) x 3/4"
(19mm) throw.• Deadbolt: One-piece stainless steel,
19/32" (15mm) x 1-1/4" (32mm) x 1"(25mm) throw.
• Cylinder: Brass, 6-pin, L4 keyway,0-bitted standard.
• Keying Features Available
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN9
Series/ ANSI No.Outside Inside Function Type Series 1000 Function Description
ML2010 Passage F01 - Latchbolt by grip either side.or Closet - Both grips always free.
ML2020 Privacy F02 - Latchbolt by grip* either side.Bedroom or - Deadbolt by thumbturn lever inside or by emergency Bathroom release tool outside.
ML2022 Store Door F14 - Latchbolt by grip* either side.- Deadbolt by key either side.
ML2024 Entrance or F21 - Latchbolt by grip* either side.Storeroom - Deadbolt by key outside or by thumbturn lever inside.
ML2029 Hotel or F15 - Latchbolt by grip inside and by guest key or master Motel key outside.
- Outside grip always rigid.- Deadbolt by thumbturn lever inside or by emergency
key outside. (ML2029)- Inside grip simultaneously retracts latchbolt and
deadbolt. (ML2029)- Emergency key shuts out all other keys. (ML2029)- Emergency key throws deadbolt, shutting out all other
keys and preventing exit from inside. (ML2029HS)- Auxiliary latch deadlocks latchbolt.
ML2000 Series Lockset Functions
Series/ ANSI No.Outside Inside Function Type Series 1000 Function Description
ML2030 Privacy F19 - Latchbolt by grip either side.Bedroom or - Deadbolt by thumbturn lever inside or by emergencyBathroom release tool outside.
- Inside grip simultaneously retracts latchbolt and deadbolt
ML2032 Institution – - Latchbolt by key either side.or Utility - Both grips always rigid.
- Auxiliary latch deadlocks latchbolt.
ML2042 Entrance F09 - Latchbolt by grip either side, unless outside grip is or Public locked by master key* from inside.Restroom - Latchbolt by key outside or by grip inside.
- Auxiliary latch deadlocks latchbolt.- Inside grip always free.
ML2048 Entrance or F10 - Latchbolt* by key outside or by grip either side, unlessApartment outside grip is locked by toggle-action stop.
- Deadbolt by key outside or by thumbturn lever inside.- Inside grip always free.
ML2051 Entrance F04 - Latchbolt by key outside or by grip either side, unless or Office outside grip is locked by toggle-action stop.
- Auxiliary latch deadlocks latchbolt.- Inside grip always free.
ML2052 Classroom - - Latchbolt by grip either side, unless outside grip is lockedIntruder - Outside grip locked or unlocked by cylinder either side
- Auxiliary latch deadlocks latchbolt- Inside grip always free.
ML2053 Entrance F04 - Latchbolt by grip either side, unless outside grip is lockedor Office - Outside grip locked or unlocked by cylinder or thumbturn
- Auxiliary latch deadlocks latchbolt.- Inside grip always free.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
10 ML2000 Series Lockset Functions
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN1
1ML2000 Series Lockset Functions
Series/ ANSI No.Outside Inside Function Type Series 1000 Function Description
ML2054 Entrance - - Latchbolt by grip either side, unless outside grip is lockedor Office - Outside grip locked or unlocked by thumbturn
- Latchbolt by key when outside grip locked- Auxiliary latch deadlocks latchbolt- Inside grip always free
ML2055 Classroom F05 - Latchbolt by grip either side, unless outside grip islocked by key outside.
- Auxiliary latch deadlocks latchbolt.- Inside grip always free.
ML2056 Classroom F06Holdback - Latchbolt by grip either side, unless outside grip is locked
- When locked, latchbolt retracted by key outside or inside grip
- Auxiliary latch deadlocks latchbolt.- Inside grip always free.
ML2057 Storeroom F07 - Latchbolt by grip inside or by key outside.or Closet - Outside grip always rigid.
- Auxiliary latch deadlocks latchbolt.- Inside grip always free.
ML2058 Entrance - - Latchbolt by grip either side, unless outside grip is lockedor Office - When locked, latchbolt retracted by key outside or inside grip
Holdback - Auxiliary latch deadlocks latchbolt.- Inside grip always free.
Note: Not approved for use on U.L. fire listed applications
ML2059 Security - - Latchbolt and deadbolt by grip inside or by key outsideStoreroom - Inside grip simultaneously retracts deadbolt & latchboltor Closet - Outside grip always rigid.
- Auxiliary latch deadlocks latchbolt.- Inside grip always free.
ML2060 Privacy F22 - Latchbolt by grip either side, except when outside islocked by thumbturn inside.
- Operating inside grip, closing door or operatingemergency key outside unlocks outside grip.
Series/ ANSI No.Outside Inside Function Type Series 1000 Function Description
ML2062 Intruder F33 - Latchbolt by grip either side, unless outside grip is Deadbolt locked by projection of deadbolt
- Deadbolt thrown by key from either side.- Inside grip simultaneously retracts latchbolt and
deadbolt and unlocks outside grip
ML2065 Dormitory F13 - Latchbolt by grip either side.or Entrance - Deadbolt by key outside or by thumbturn lever
inside.- Inside grip simultaneously retracts latchbolt and
deadbolt.
ML2067 Apartment F20 - Latchbolt by grip either side, unless outside grip isor Dormitory locked by toggle-action stop or by projection of
deadbolt.- Deadbolt by key outside or by thumbturn lever
inside.- Inside grip simultaneously retracts latchbolt and
deadbolt; outside grip remains locked.- Auxiliary latch deadlocks latchbolt.
ML2069 Institutional – - Latchbolt by grip either side, except when outsidePrivacy is locked by thumbturn inside.
- Operating inside grip or closing door unlocks outside grip.
- Key outside retracts latch at all times, even if thumbturn is held in locked position.
- Auxiliary latch deadlocks latchbolt.
ML2072 Classroom – - Latchbolt by lever from either side unless outside Security lever is locked by projection of deadbolt.
- Deadbolt thrown by key from either side.- Inside lever simultaneously retracts latchbolt and
deadbolt; outside lever remains locked.- Retracting latchbolt by key unlocks outside lever.- Auxiliary latch deadlocks latchbolt.
ML2073 Classroom – - Latchbolt by grip either side, unless outside grip is Security locked by projection of deadbolt.
- Deadbolt thrown by key- Inside grip simultaneously retracts latchbolt and
deadbolt; outside lever remains locked.- Retracting latchbolt by key unlocks outside grip.- Auxiliary latch deadlocks latchbolt.
ML2075 Classroom – - Latchbolt by lever from either side unless outside Security lever is locked by projection of deadbolt.
- Deadbolt thrown by outside key or inside thumbturn.- Inside lever simultaneously retracts latchbolt and
deadbolt; outside lever remains locked.- Retracting latchbolt by key unlocks outside lever.- Auxiliary latch deadlocks latchbolt.
ML2050 Half Dummy – - Grip acts as pull only; no operation.Trim
ML2070 Full Dummy – - Grips act as pulls only; no operation.Trim
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
12 ML2000 Series Lockset Functions
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN1
3
GRE Knob: Wrought reinforcedSquare Rose: Wrought reinforced
GWE Knob: Wrought Square Rose: Wrought reinforced
GRC Knob: Wrought GRD Knob: Wroughtreinforced reinforcedRose: 2-7/8" Wrought Rose: 3-1/2"reinforced Wrought reinforced
GWC Knob: Wrought GWD Knob: WroughtRose: 2-7/8" Wrought Rose: 3-1/2" reinforced Wrought reinforced
BWP Knob: WroughtEscutcheon: Wrought
BRE Knob: Wrought reinforcedRose: Wrought reinforced
BWE Knob: Wrought Rose: Wrought reinforced
BWM Knob: WroughtEscutcheon: Wrought
BRC Knob: Wrought BRD Knob: Wroughtreinforced reinforcedRose: Wrought Rose: Wrought reinforced 2-7/8" reinforced 3-1/2"
BWC Knob: Wrought BWD Knob: Wrought Rose: Wrought Rose: Wrought reinforced 2-7/8" reinforced 3-1/2"
ML2000 Series Mortise Knob Trim Designs
BWN Knob: WroughtEscutcheon: Wrought
GWP Knob: WroughtEscutcheon: Wrought
GWM Knob: WroughtEscutcheon: Wrought
GWN Knob: WroughtEscutcheon: Wrought
Also available BRM Also available GRM
Also available BRP
Also available BRN
Also available GRP
Also available GRN
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
14 ML2000 Series Mortise Knob Trim Designs
YWN Knob: WroughtEscutcheon: Wrought
YWA Knob: WroughtRose: Wrought
YWM Knob: WroughtEscutcheon: Wrought
YWP Knob: WroughtEscutcheon: Wrought
Unless otherwise specified, locks will be furnished standard forRH, 1-3/4" door, L4 keyway cylinders x “0” bitted.
Components
438F90Key plate pack
519F10Turnpiece pack
409F06 SpindleSwivel/1 hole/1-3/4" door(ML2200 x Knob) 360F78 Spindle
Swivel/6 hole/2-1/4" door(ML2200 x Knob)
499F83 Spindle3 piece/lever/1-3/4" door
499F87 Spindlelever x knob/1-3/4" door
499F91 Spindleknob x lever/1-3/4" door 303F19 Spindle
For knob half trim1-3/4" door
Available Finishesfrom Stock
See page 15 foravailable finishes.
483F35 Adjusting bolt leverhalf trim 1-3/4" door
696F58 Spindleknob x knob 1-3/4" door
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN1
5
OPTIONS SYMBOL Door Thickness (1-3/4") STDDoor Thickness (1-3/8") D138Door Thickness (2-1/4") D214
ANSI Wrought Box M17Occupancy Indicator M19
Half Trim M30Less Cylinder LC
Less Double Cylinder LCHigh Security HS
I-C Core C6I-C Core Less Core CL6
High Security I-C Core CHS
ML2000 Series Mortise Knob Trim Designs
How to Order ML2000 Mortise Knob Locks
FUNCTION TRIM FINISH HAND MISC. CYL. KWY.* * * *
ML2010 BRC GRC YWA 605 RH M17 LC SEEML2020 BRD GRD YWM 612 RHR M19 HS PAGEML2022 BRE GRE YWN 613 LH M30 CHS 3ML2024 BRM GRM YWP 625 LHR M31 C6ML2029 BRN GRN 626 CL6ML2030 BRP GRP 630ML2032 BWC GWCML2042 BWD GWDML2048 BWE GWEML2050 BWM GWMML2051 BWN GWNML2055 BWP GWPML2057ML2060ML2065ML2067ML2069ML2070ML2072ML2075
BRC • •BRD • •BRE • •BWC • •BWD • •BWE • •GRC • • • • • •GRD • • • • • •GRE • • • • • •GWC • • • •GWD • • • •GWE • • • •YWA • • • •BWM • • •BWN • •BWP • •GWM • • • •GWN • •GWP • •YWM • • • •YWN • •YWP • •
TRIM
DES
IGN
605
612
613
625
626
630
FINISHES
Call Akron Hardware for available finishes on additional trim designs
ASA Lever: CastRose: Wrought
NSA Lever: CastRose: Wrought
CSA Lever: CastRose: Wrought
PSA Lever: CastRose: Wrought
DSA Lever: CastRose: Wrought
RWA Lever: WroughtRose: Wrought
ESA Lever: CastRose: Wrought
LWA Lever: WroughtRose: Wrought
Available Finishesfrom Stock
See page 21 foravailable finishes.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
16 ML2000 Series Mortise Lever x Rose Trim
Handing required
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN1
7ML2000 Series Mortise Lever x Escutcheon Trim
ASM Lever: CastEscutcheon: Wrought
CSP Lever: CastEscutcheon: Wrought
ASN Lever: CastEscutcheon: Wrought
DSM Lever: CastEscutcheon: Wrought
ASP Lever: CastEscutcheon: Wrought
DSN Lever: CastEscutcheon: Wrought
CSM Lever: CastEscutcheon: Wrought
DSP Lever: CastEscutcheon: Wrought
CSN Lever: CastEscutcheon: Wrought
ESM Lever: CastEscutcheon: Wrought
Handing required
Handing required
Handing required
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
18
ESN Lever: CastEscutcheon: Wrought
NSM Lever: CastEscutcheon: Wrought
ESP Lever: CastEscutcheon: Wrought
NSN Lever: Cast
LWM Lever: WroughtEscutcheon: Wrought
NSP Lever: CastEscutcheon: Wrought
LWN Lever: WroughtEscutcheon: Wrought
ML2000 Series Mortise Lever x Escutcheon Trim
PSM Lever: CastEscutcheon: Wrought
LWP Lever: WroughtEscutcheon: Wrought
PSN Lever: CastEscutcheon: Wrought
ML2000 Series Mortise Lever x Escutcheon Trim
PSP Lever: CastRose: Wrought
RWM Lever: WroughtRose: Wrought
RWN Lever: WroughtRose: Wrought
RWP Lever: WroughtRose: Wrought
Combine simplicity and access control withCorbin Russwin’s ML20900 ECL series electri-cally controlled mortise lock. Utilizing theproven ML2000 Series mortise lockset withthe patented quick reversible latchbolt, theML20900 series provides solenoid-operatedremote locking and unlocking.
Electrified Mortise Lock Bodies
Unless otherwise specified, locks will be furnished standard forRH, 1-3/4" door, L4 keyway cylinders x “0” bitted.
Available Finishesfrom Stock
See page 21 foravailable finishes.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN1
9
Custom cable lengths available forElectroLynx connections. Call AkronHardware for pricing and information.
How to Order ML2000 Mortise Lever Locks
FUNCTION TRIM FINISH HAND MISC. CYL. KWY.* * * *
ML2010 ASA LWA 605 RH M17 LC SEEML2020 ASM LWM 606 RHR M19 HS PAGEML2022 ASN LWN 612 LH M30 CHS 3ML2024 ASP LWP 613 LHR M31 C6ML2029 CSA NSA 625 CL6ML2030 CSM NSM 626ML2032 CSN NSN 630ML2042 CSP NSPML2048 DSA PSAML2050 DSM PSMML2051 DSN PSNML2055 DSP PSPML2057 ESA RWAML2060 ESM RWMML2065 ESN RWNML2067 ESP RWPML2069ML2070ML2072ML2075
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
ML2000 Series Mortise Lever x Escutcheon Trim20
OPTIONS SYMBOL Door Thickness (1-3/4") STDDoor Thickness (1-3/8") D138Door Thickness (2-1/4") D214
ANSI Wrought Box M17Occupancy Indicator M19
Half Trim M30Less Cylinder LC
Less Double Cylinder LCHigh Security HS
I-C Core C6I-C Core Less Core CL6
High Security I-C Core CHS
ASA • • • • • •CSA • • • • • •DSA • •ESA • •LWA • • • • • • •NSA • • • • • • •PSA •RWA • • • • • •
TRIM
DES
IGN
605
606
612
613
625
626
FINISHES
630
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN2
1
ASM • • • •ASN • •ASP • •CSM • • • •CSN • •CSP • •DSM •DSN •DSP •ESM • •ESN •ESP • •
TRIM
DES
IGN
605
612
613
626
FINISHES
LWM • • • •LWN • •LWP • •NSM • • • •NSN • •NSP • •PSM •PSN •PSP •RWM • • • •RWN • •RWP • •
TRIM
DES
IGN
605
612
613
626
FINISHES
Call Akron Hardware for available finishes on additional trim designs
Mortise Lever x Escutcheon Trim Finishes
• Handing: Non-handed.• Door Thickness: 1-3/4" (44mm) to 2" (51mm) standard.• Backset: 2-3/4" (70mm) standard. optional: 3-3/4" (95mm), 5" (127mm).• Lock Chassis: Steel, zinc dichromated for corrosion resistance.• Front: Wrought brass or bronze. 2-1/4" (57mm) x 1-1/8" (29mm). Accommodates flat
doors and doors beveled 1/8" (3mm) in 2" (51mm).• Latchbolt: Brass, chrome plated with 1/2" (13mm) throw. Optional: 3/4" (19mm) throw
deadlocking fire latch for pair of doors.• Auxiliary Latchbolt: Deadlocking latchbolt prevents manipulation when door is closed.• Strike: Wrought brass or bronze, ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4"
(32mm) x 1-1/4" (32mm) lip to center. Optional strikes, lip lengths and ANSI wroughtstrike box available.
• Cylinder: Brass, 6-pin, L4 keyway, 0-bitted standard.• Keying Features Available
Ideal for high-use commercial, industrial and institu-tional applications such as schools, universities, hotels,apartments.• Lever release design for vandal resistance.• Solid cast levers.• Independent return springs prevent lever sag.• Anti-rotation throughbolts.• Exceeds ANSI Grade 1 requirements.• UL 3-hour fire rating for 4' x 10' door.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
CL3300 Series Cylindrical Locks
Features Include:
22
Available Finishesfrom Stock
See page 28 foravailable finishes.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
INCL3500 Series Cylindrical Locks
23
A mid-priced, heavy duty Grade 1 lever lockset, idealfor commercial, institutional and multi-family applica-tions.• Non-handed• Solid cast levers• No plastic inserts• Independent return springs prevent lever sag• Throughbolted cylindrical chassis• Trim and keying compatible with other Corbin
Russwin locksets
• Handing: Non-handed (except for CL3529, CL3580, CL3581, CL3590, CL3591; specify hand).• Door Thickness: 1-3/4" Standard. Optional 1-3/8”.• Backset: 2-3/4" (70mm) standard. Optional: 2-3/8" (60mm), 3-3/4" (95mm), and 5" (127mm).• Lock Chassis: Steel, zinc dichromated for corrosion resistance.• Front: Brass, Bronze or Stainless Steel. 2-1/4" (57mm) x 1-1/8" (29mm) for 2-3/4" (70mm)
backset; 2-1/4" (57mm) x 1" (25mm) for 2-3/8" (60mm) backset. Accommodates flatdoors and doors beveled 1/8" (3mm) in 2"(51mm).
• Latchbolt: Brass, chrome plated with 1/2" (13mm) throw.• Auxiliary Latchbolt: Deadlocking latchbolt prevents manipulation when door is closed.• Strike: Wrought brass or Stainless ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4"
(32mm) x 1-1/4" (32mm) lip to center.• Cylinder: Brass, 6-pin, L4 keyway, 0-bitted standard.• Keying Features Available
Features Include:
Available Finishesfrom Stock
See page 28 foravailable finishes.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
24 CL3900 Series Cylindrical Locks
• Handing: Non-handed.• Door Thickness: 1-3/8" (35mm) to 1-3/4" (44mm) standard. Optional: 2" (51mm) to
2-1/4" (57mm) • Backset: 2-3/4" (70mm) standard. Optional: 2-3/8" (60mm).• Lock Chassis: Steel, zinc dichromated for corrosion resistance.• Front: Standard: 2-1/4" (57mm) x 1-1/8" (29mm), square corner, beveled, for 2-3/4"
(70mm) backset or 2-1/4" (57mm) x 1" (25mm) square corner, beveled, for 2-3/8"(60mm) backset.
• Latchbolt: 1/2" (13mm) throw.• Auxiliary Latchbolt: Deadlocking latchbolt prevents manipulation when door is closed.• Strike: ANSI curved lip strike standard. 4-7/8" (124mm) lip to center.• Cylinder: Brass, 6-pin, L4 keyway, 0-bitted standard.• Keying Features Available
An economical, Grade 2 standard duty lever lockset,ideal for light commercial applications.• Solid cast levers.• ANSI Grade 2 certification.• UL 3-hour fire rating.• Independent lever return springs.• Throughbolts on door for solid attachment.• Cover ANSI/DHI Door Prep A115.18-1994 “Spider Cut
Out”.• Lever Release™ for vandal resistance.
Features Include:
Available Finishesfrom Stock
See page 28 foravailable finishes.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN2
5
Type
Passage orCloset
Privacy,Bedroom orBathroomDeadlock
Institutionor Utility
Half Dummy Trim
Entrance or Office
ClassroomIntruder
Classroom
ANSI
F75
F76
F87
—
F109
—
F84
CL3300
CL3310
CL3320
CL3332
CL3350
CL3351
CL3352
CL3355
CL3500
CL3510
CL3520
—
CL3550
CL3551
—
CL3555
CL3900
CL3910
CL3920
—
CL3950
CL3951
—
CL3955
Function Description
- Latchbolt by lever either side.- Both levers always free.
- Latchbolt by lever either side.- Outside lever locked by push or turn
button.- Outside lever unlocked by emergency
release tool outside, by rotating insidelever or by closing door. (CL3320,CL3620, CL3920 only)
- Inside lever always free.
- Deadlocking latchbolt by key either side.- Lever handle is freewheeling in locked
position.
- Lever acts as pull only; no operation.
- Latchbolt by lever either side, exceptwhen turn button locks outside lever.
- Pushing in and turning button locks outside lever, requiring key at all times.Turning inside lever does not unlock outside lever until button is manuallyturned to unlocked position. (CL3351,CL3651, CL3951).
- Key outside retracts latchbolt.- Inside lever always free.
- Latchbolt is operated by rotating theinside lever, or rotating the outside leveronly when not locked from the inside oroutside by key.
-Outside lever is locked and unlocked byturning the key in the inside or outsidelever.
- Inside lever cannot be locked.
- Latchbolt by key in outside lever or byrotating inside lever.
- Outside lever always rigid, unless freewheeling – CL3355, CL3955
- Inside lever always free.
CL3300 / CL3500 / CL3900 SeriesFunctions
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
26 CL3300 / CL3500 / CL3900 Series
Functions
Type
Storeroom or Closet
Entrance or Office
Full Dummy Trim
Apartment,Exit orPublic Toilet
PassageLever xBlank Plate
KeyedLever xBlank Plate
ANSI
F86
F82
—
F88
—
—
CL3300
CL3357
CL3361
CL3370
CL3372
CL3380
CL3381
CL3500
CL3557
—
CL3570
—
—
—
CL3900
CL3957
—
—
—
—
—
Function Description
- Deadlocking latchbolt by lever eitherside, except when key outside locks outside lever.
- Outside lever unlocked by key outside.- Inside lever always free.
- Deadlocking latchbolt by lever eitherside, except when turn button locks outside lever.
- Push button released by turning insidelever or by key in outside lever.
- Closing door does not release push button.
- Inside lever/knob always free.
- Levers act as pull only; no operation.
- Deadlocking latchbolt by lever eitherside, except when key locks outsidelever.
- Key outside retracts latchbolt.- Key inside unlocks outside lever.- Inside lever always free.- Keyed alike unless otherwise specified.
- Deadlocking latchbolt by lever.- Lever on one side; blank plate on other
side.- Lever always free.- When ordering, specify hand from lever
side.- For single or double communicating
doors.
- Deadlocking latchbolt by lever, exceptwhen lever is locked by key.
- Lever on one side; blank plate on otherside.
- When ordering, specify hand from leverside.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN2
7Cylindrical Lever Trim Designs
CL3300 Series
AZD Lever: Die cast zincRose: Wrought
NZD Lever: Die cast zincRose: Wrought
AZD Lever: Die cast zincRose: Wrought brass or bronze
NZD Lever: Die cast zincRose: Wrought brass or bronze
AZD Lever: Die cast zincRose: Wrought brass or bronze
NZD Lever: Die cast zincRose: Wrought brass or bronze
CL3500 Series
CL3900 Series
PZD Lever: Die cast zincRose: Wrought
PZD Lever: Die cast zincRose: Wrought brass or bronze
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
28 Cylindrical Lever Trim Designs
How to Order Cylindrical Lever Sets
FUNCTION TRIM FINISH HAND BACKSET STRIKE MISC. CYL. KWY.* * * * * *
CL3310 3510 3910 AZD 605 RH B238 ANSI M17 LC SEECL3320 3520 3290 NZD 606 RHR B234 SC114 HS PAGECL3332 PZD 612 LH B334 CHS 3CL3350 3550 3950 613 LHR B500 C6CL3351 3551 3951 625 CL6CL3355 3555 3955 626CL3357 3557 3957CL3361CL3370 3570 3970CL3372CL3380CL3381
AZD • • • • • •NZD • • • • • •PZD • • •
AZD • • • • • •NZD • • • • • •
AZD • • • • •NZD • • • • •PZD • • • • •
TRIM
DES
IGN
605
606
612
613
625
626
FINISHES
OPTIONS SYMBOL Door Thickness STDBackset (2-3/8") B238Backset (3-3/4") B334
Backset (5") B500ANSI Strike STD
Curved Lip Box SC114ANSI Wrought Box M17
Less Cylinder LCLess Double Cylinder LC
I-C Core C6I-C Core Less Core CL6
High Security I-C Core CHSBest Core Lever M08
3300
3500
3900
Unless otherwise specified, locks will be furnished standard forRH, 1-3/4" door, 2-3/4" backset, ANSI strike, L4 keyway cylin-ders x “0” bitted.
Call our Sales department - toll free - for current pricing on all Corbin Russwin products
30
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
CK4200 Series Cylindrical Knob Set
Ideal for demanding, high-use commercial, industrialand institutional applications.• Patented (5,123,682) “Lock-on” rose liners and thimble
increase security and prevent lock from loosening.• 1-3/4" (44mm) knob shank minimizes wear.• 5/8" (16mm) latch and concealed knob catch enhance
strength and security.
• Handing: Field reversible.• Door Thickness: 1-3/8" (35mm)- 1-3/4" (44m) standard.• Backset: 2-3/4" (70mm) standard. Optional: 3-3/4" (95mm), 5" (127mm) and 7" (178mm).• Lock Chassis: Steel, zinc dichromated for corrosion resistance.• Front: Wrought brass, bronze or stainless steel, 2-1/4" (57mm) x 1-1/8" (29mm).
Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).• Latchbolt: Brass, chrome plated 5/8" (16mm) throw.• Strike: Wrought brass or bronze, ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4"
(32mm) x 1-1/4" (32mm) lip to center.• Cylinder: Brass, 6-pin, L4 keyway, 0-bitted standard.• Keying Features Available• Keys: Two nickel-silver standard.
Features Include:
Available Finishesfrom Stock
See page 35 foravailable finishes.
CK4400 Series Cylindrical Knob Set
• Handing: Field reversible.• Door Thickness: 1-3/8" (35mm) to 1-3/4" (44mm) standard.• Backset: 2-3/4" (70mm) standard. Optional: 2-3/8" (60mm), 3-3/4" (95mm), 5" (127mm).• Lock Chassis: Steel, zinc dichromated for corrosion resistance.• Front: Wrought brass, bronze or stainless steel. 2-1/4" (57mm) x 1-1/8" (29mm).
Accommodates flat doors and doors beveled 1/8" (3mm) in 2" (51mm).• Latchbolt: Brass, chrome plated with 1/2" (13mm) throw.• Strike: Wrought brass, bronze or stainless steel, ANSI curved lip standard, 4-7/8"
(124mm) x 1-1/4" (32mm) lip to center.• Cylinder: Brass, 6-pin, L4 keyway, 0-bitted standard.• Keying Features Available.• Keys: Two nickel silver standard.
An outstanding combination of value and performance.Ideal for quality residential and light commercial build-ings.• Wide array of functions.• Precision manufactured mechanisms, zinc dichromated
for corrosion resistance.• Stainless steel latchbolt for long life.• Adjustable latchbolt accommodates flat and beveled
doors.• Stainless steel trim available.
Features Include:
Available Finishesfrom Stock
See page 35 foravailable finishes.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN3
1
32
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
Function Description
- Latchbolt by knob either side.- Both knobs always free.
- Latchbolt by knob either side.- Outside knob locked by push button.- Emergency release in outside knob.- Outside knob unlocked by emergency release tool
outside, by rotating inside knob or by closing door.- Inside knob always free.
- Deadlocking latchbolt by knob inside or by key outside.
- Push button shuts out all keys except emergency key and projects occupancy indicator in face of cylinder.
- Push button released by turning inside knob or by closing door.*
- Outside knob always rigid.- Inside knob always free.
- Deadlocking latchbolt by knob either side.- Outside knob locked by pushbutton.- Outside knob unlocked by turning slotted button
outside, by rotating inside knob, or by closing door.- Inside knob always free.
- Deadlocking latchbolt key either side.- Both knobs always rigid.
- Knob acts as pull only; no operation.
- Deadlocking latchbolt by knob either side, except when turn or push button locks outside knob.
- Pushing in and turning button locks outside knob,requiring key at all times. Turning inside knob doesnot unlock outside knob until button is manuallyturned to unlocked position. (CK4451 only)
- Key outside retracts latchbolt. (CK4251)- Outside knob unlocked by turn button. (CK4251)- Turning inside knob unlocks outside knob.
(CK4451 only)- Inside knob always free.
CK4200 / CK4400 SeriesFunctions
Type
Passage orCloset
Privacy,Bedroom orBathroom
Hotel orMotel
Privacy,Bedroom orBathroom
Institutionalor Utility
Half Dummy Trim
Entrance or Office
ANSI
F75
F76
F93
F76
F87
—
F81/F82
CK4200
CK4210
CK4220
—
—
CK4232
CK4250
CK4251CK4261
CK4400
CK4410
—
CK4429
CK4430
—
CK4450
CK4451
Function Description
- Deadlocking latchbolt by knob either side, exceptwhen key outside locks outside knob.
- Outside knob unlocked by key outside.- Inside knob always free.
- Deadlocking latchbolt by key in outside knob or byrotating inside knob.
- Outside knob always rigid.- Inside knob always free.
- Deadlocking latchbolt by key in outside knob or byrotating inside knob.
- Key outside unlocks outside knob to retract latchbolt. Key is retained in the unlocked mode when keyis removed, outside knob is locked.
- Inside knob always free.
- Deadlocking latchbolt by knob either side, except when push button locks outside knob.
- Push button released by turning inside knob or by key in outside knob.
- Closing door does not release push button.- Inside knob always free.
- Knob acts as pull only; no operation.
- Deadlocking latchbolt by knob either side, except when key inside locks outside knob.
- Key outside retracts latchbolt.- Key inside unlocks outside knob.- Inside knob always free.- Key alike unless otherwise specified.
- Deadlocking latchbolt by knob outside only.- Blank rose inside; no inside operation.
- Deadlocking latchbolt by knob either side, except when key either side locks both knobs. (CK4282,CK4482)
- Keyed alike unless otherwise specified.
Type
Classroom
Storeroomor Closet
Barrier-FreeStoreroomor PublicRestroom
Office orPrivacy
Full Dummy Trim
Apartment ExitPublicToilet
Communi-cating orExit
Store Door
ANSI
F84
F86
F86
F82
—
F88
—
F91
CK4200
CK4255
CK4257
—
CK4261
CK4270
CK4272
—
CK4282
CK4400
CK4455
CK4457
—
—
—
—
CK4480
CK4482
CK4200 / CK4400 SeriesFunctions
* Unless push button has been fixed in locked position by spanner key (furnished). When push button is fixed by spanner key,lock is operable only by emergency key or by display key.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN3
3
34
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
CK4200 / CK4400 SeriesCylindrical Knob Sets
CK4200 Series
CK4400 Series
GRC Knob: Wrought reinforcedRose: Wrought reinforced
GRD Knob: Wrought reinforcedRose: Wrought reinforced
31/2" (89mm) Dia.
GRE Knob: Wrought reinforcedRose: Wrought reinforced
3" (76mm) Sq.
BRC Knob: Wrought reinforcedRose: Wrought reinforced
BRD Knob: Wrought reinforcedRose: Wrought reinforced
31/2" (89mm) Dia.
BRE Knob: Wrought reinforcedRose: Wrought reinforced
3" (76mm) Sq.
GWC Knob: WroughtRose: Wrought reinforced
BWC Knob: WroughtRose: Wrought reinforced
CO
RB
IN R
US
SW
IN
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
INCK4200 / CK4400 SeriesCylindrical Knob Sets
How to Order Cylindrical Knob Sets
FUNCTION TRIM FINISH HAND BACKSET STRIKE MISC. CYL. KWY.* * * * * *
CK4210 4410 GRC 605 RH B238 ANSI M10 LC SEECK4220 4430 GRD 612 RHR B234 SC114 M17 HS PAGECK4232 4450 GRE 613 LH B334 CHS 3CK4250 4451 GWC 625 LHR B500 C6CK4251 4455 BWC 626 CL6CK4255 4457 BRC 629CK4257 4480 BRD 630CK4261 4482 BRECK4270CK4272CK4275CK4282
GRC • • • • • •GRD • • • • • •GRE • • • • • •BRC • • •BRD • • •BRE • • •
GRC • • • • •BWC • •
TRIM
DES
IGN
605
612
613
625
626
629
FINISHESOPTIONS SYMBOL Door Thickness STDDoor Thickness D214Backset (2-3/8") B238Backset (3-3/4") B334
Backset (5") B500ANSI Strike STD
Curved Lip Box SC114Best Core Knob M10
ANSI Wrought Box M17Less Cylinder LC
Less Double Cylinder LCHigh Security HS
I-C Core C6I-C Core Less Core CL6
High Security I-C Core CHS
4200
4400
Unless otherwise specified, locks will be furnished standard forRH, 1-3/4" door, 2-3/4" backset, ANSI strike, L4 keyway cylin-ders x “0” bitted.
630
35
36
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
UT5200 Series Unit Locks
Its pre-assembled, unitized construction is ideal forhightraffic commercial, institutional and industrialapplications.• Factory pre-assembled for quick, economical, one-
piece installation; no job site assembly required.• 3/4" (19mm) radius latchbolt, designed to wedge
more tightly into the strike when tampered with,while meeting all ADA force-to-latch requirements.
• Handing: Specify hand.• Door Thickness: 1-3/4" (44m) only.• Backset: 2-3/4" (70mm) only.• Lock Chassis: One-piece investment cast frame. Zinc dichromated.• Auxiliary Latchbolt: Deadlocking latchbolt prevents manipulation when door is closed.• Strike: ANSI 4-7/8" standard. Optional strikes, lip lengths and ANSI wrought strike box
available.• Front: Beveled 1/8" (3mm) in 2" (51mm).• Latchbolt: Brass, chrome-plated 3/4" (19mm) throw pivoted swinging type.• Cylinder: Interchangeable Core, Brass, 6-pin, L4 keyway, 0-bitted standard.• Keying Features Available• Keys: Two nickel silver standard.
Features Include:
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
INUT5200 Series Lockset Functions
Function Description
- Latchbolt by grip either side.- Both grips always free.
- Latchbolt by grip either side.- Outside grip locked by push button.- Outside grip unlocked by emergency release tool outside or by
rotating inside grip or by closing door.- Inside grip always free.
- Deadlocking latchbolt by grip either side, except when turn button locks outside grip.
- Key outside retracts latchbolt.- Outside grip unlocked by burn button.- Inside grip always free.
- Deadlocking latchbolt by grip either side, except when key outside locks outside grip.
- When outside grip is locked, latchbolt is operated by key outside or by rotating inside grip.
- Inside grip always free.
- Deadlocking latchbolt by key in outside grip or by rotating inside grip.
- Outside grip always rigid.- Inside grip always free.
Type
Passage or Closet
Privacy,Bedroom orBathroom
Entranceor Office
Classroom
Storeroom or Closet
ANSI
F36
F37
F40
F42
F44
UT5200
UT5210
UT5220
UT5251
UT5255
UT5257
37
38
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
UT5200 Series Unit Locks
ESE Knob: WroughtRose: Wrought reinforced
How to Order Cylindrical Knob Sets
FUNCTION TRIM FINISH HAND STRIKE MISC. CYL. KWY.* * * * *
UT5210 ESE 626* RH SC114 M17 CHS SEEUT5220 RHR CL6 PAGEUT5251 LH 3UT5255 LHRUT5257
OPTIONS SYMBOL Door Thickness (1-3/4") STD
ANSI Strike STDCurved Lip Box SC200
I-C Core STDI-C Core Less Core CL6
High Security I-C Core CHS
Unless otherwise specified, unit locks will be furnished stan-dard with ANSI strike, L4 keyway I-C cylinders x “0” bitted.
*Satin Chromium Plated
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
Features Include:• Case: Extruded brass.• Shackle: Hardened steel or brass.• Locking: Conventional model: latching at toe.
IC model: ball-bearing locking heel and toe.• Cylinder: Conventional model: nonremovable 6-pin,
L4 keyway. IC model: Interchangeable core.• Keying Features Available: Master keying,
Construction master keying, Interchangeable core(IC), 6-pin IC, Pyramid IC, Security IC, Concealed keycontrol, Visual key control (not for HS).
• Keys: Two nickel silver standard.• Finish: BHMA 606 Satin Brass.• I-C Core – PL5080, PL5180.• I-C Core (Less Core) – PL5070, PL5170.
Push-Pulls and Padlocks
This contemporary design requires only a light push orpull by fingertip, hand, forearm or elbow to operate.Developed to provide fast, smooth, safe door action inmedical facilities, it may be used on any door requiringa push-pull function.
Features Include:• Handing: Non-handed.• Door Thickness: 1-3/4" (44mm).• Backset: 5" (127mm).• Front: Wrought brass or bronze standard. 2-1/4"
(57mm) x 1-1/8" (28mm). Accommodates doorsbeveled 1/8" (3mm) in 2" (51mm).
• Latchbolt: Brass, chrome plated, 5/8" (16mm) throw.• Strike: Wrought brass or bronze, curved lip box stan-
dard. 2-3/4" (70mm) x 1-1/8" (28mm) x 1-1/4"(32mm) lip to center.
HL-11 Push-Pull Latch Set x ANSI Strike
PL5000 / PL5100 Series Non-Assembled Padlocks
44
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
46 ED4000 Series Exit Devices
• Bar Length: Easily field cut to size. Standard 36" (914mm) bar fits 30" (762mm)-36"(914mm) door. Optional 48" (1219mm) and 24" bar.
• Door Thickness: 1-3/4" (44mm) standard.• Stile: Minimum width 2" (51mm)• Projection 3-1/4" (83mm) active, 2-3/4" (70mm) dogged.• Available with M94 and M97 option.
Designed for narrow stile applications on full glassdoors in high-use and high-abuse situations.• Meets ANSI Grade 1 requirements• Easy-to-use pushbar for quick egress and ADA
compliance• Heavy-duty construction• Quiet operation• Low projection for barrier-free code compliance.• Wide range of trim designs and finishes to match
other Corbin Russwin products• Throughbolted trims for strength, security, durability,
smooth operation and easy installation.• One-point dogging.
Features Include:
In terms of an exit device, vector forces mean thatpressure applied to the door results in a forceagainst the stop and the frame, resulting indoor/frame separation. The standard pullmanlatchbolt applies 280 pounds of force against theframe from a 400-pound pull on the door.The SecureBolt™ exit device only applies 63pounds of force against the frame from a 400-pound pull on the door. Less force means the doorand frame do not separate, providing a higher levelof security, as the door cannot be pulled open.
ED4200S SecureBolt Exit Device
Available Finishesfrom Stock
See page 59 foravailable finishes.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN4
7ED5000 Series Exit Devices
Designed for applications in high-use situations, ideal for new construction and renovations.• Meets ANSI Grade 1 requirements• Easy-to-use pushbar for quick egress and ADA
compliance• Heavy-duty construction• Quiet operation• Low projection for barrier-free code compliance• Wide range of finishes, trims, and styles to match
other Corbin Russwin products.• Throughbolted trims for strength, security, durability,
smooth operation and easy installation• One-point dogging on panic devices• Devices available to satisfy UL safety and fire label
requirements
• Bar Length: Easily field cut to size. Standard 36" (914mm) bar fits 30" (762mm) - 36" (914mm) door.
• Door Thickness: 1-3/4" (44mm) standard.• Stile: Minimum width 4-1/2" (114mm).• Projection: 3-1/4" (83mm) active, 2-3/4" (70mm) dogged.• Less Bottom Rod: M55 less bottom rod option available on ED5470(B) and ED5860(B) exit
devices for panic and fire-rated doors up to 4' x 10' (8' x 10' pairs).
Features Include:
In terms of an exit device, vector forces mean thatpressure applied to the door results in a forceagainst the stop and the frame, resulting indoor/frame separation. The standard pullmanlatchbolt applies 280 pounds of force against theframe from a 400-pound pull on the door.The SecureBolt™ exit device only applies 63pounds of force against the frame from a 400-pound pull on the door. Less force means the doorand frame do not separate, providing a higher levelof security, as the door cannot be pulled open.
ED5200S SecureBolt Exit Device
Available Finishesfrom Stock
See page 59 foravailable finishes.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
48
SurfaceVertical RodED4400/ED5400Inside Outside
ED4000 / ED5000 SeriesFunctions
Rim/Secure Bolt™ED4200/ED4200SED5200S/ED5600Inside Outside Type
Exit Only
Dummy
Nightlatch
Classroom*
Passage
Storeroom(ThumbpieceActive)
Dummy
AN SI No.
01
02
03
05
15
06
02
Function Description
- Exit only; no trim.
- Entrance by trim when actuating bar is locked down.
- Entrance by trim when latch bolt is retracted by key. Key removable only when locked.
- Entrance by thumbpiece.Key locks or unlocks thumbpiece.
- Entrance by trim when latch is released by thumbpiece. Thumbpiece is always active, no cylinder.
- Entrance by thumbpiece only when released by key. Key removable only when locked.
- Entrance by trim when actuating bar is locked down.
*Classroom function trims can be converted to Storeroom function by a simple field adjustment.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN4
9ED4200 / ED5000 SeriesFunctions
SurfaceVertical RodED4400/ED5400Inside Outside
Rim/Secure Bolt™ED4200/ED4200SED5200S/ED5600Inside Outside Type
Classroom*
Passage
Storeroom(Grip Active)
ANSI No.
08
14
09
Function Description
- Entrance by knob or lever.Key locks or unlocks knob or lever.
- Entrance by trim when latchbolt is released by knob or lever. Knob or lever always active, no cylinder
- Entrance by knob or lever only when released by key. Key removable only when locked.
Classroom*
Passage
11
16
- Entrance by control turn piece. Key locks or unlockscontrol.
- Latchbolt retracted by thumbturn.
Nightlatch 03 - Entrance by trim when latchbolt is retracted by key. Key removable only when locked.
4000 Series Only
5000 Series Only
*Classroom function trims can be converted to Storeroom function by a simple field adjustment.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
ED5000 Series Functions50
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
ED5000 Series Functions52
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
54 ED4000 / ED5000 Series
Exit Devices Trim Designs
A8Lever: CastEscutcheon: WroughtCylinder: Rim
C8Lever: CastEscutcheon: WroughtCylinder: Rim
G9Knob: WroughtEscutcheon: WroughtCylinder: Rim
G8Knob: WroughtEscutcheon: WroughtCylinder: Rim
L8Lever: CastEscutcheon: WroughtCylinder: Rim
A9Lever: CastEscutcheon: ForgedCylinder: Rim
C9Lever: CastEscutcheon: ForgedCylinder: Rim
L9Lever: CastEscutcheon: ForgedCylinder: Rim
N8Lever: CastEscutcheon: WroughtCylinder: Rim
T13Pull: CastEscutcheon: WroughtCylinder: Rim
T14Pull: CastEscutcheon: WroughtCylinder: Rim
F2Plate: WroughtCylinder: Mortise
P9Pull: ExtrudedEscutcheon: WroughtCylinder: Rim
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN5
5ED4000 / ED5000 SeriesExit Devices Trim Designs
N9Lever: CastEscutcheon: ForgedCylinder: Rim
9903 - Fail SafeFunction
- Lever is locked when power is on (Free Wheeling)- Power off allows entry from trim- Inside device is always active for egress- Mechanical key overide
9905 - Fail SecureFunction
- Lever is locked when power is off (Free Wheeling)- Power on allows lever activation for entry- Inside device is always active for egress- Mechanical key overide
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
56 ED8000 Series Exit Devices and Trims
Ideal for high-use situations in new construction andrenovations.• Meets ANSI Grade 1 requirements.• Heavy-duty steel construction.• Easy-to-use pushbar operation for quick egress and
ADA compliance.• Low profile and projection for barrierfree code
compliance.• No projecting parts to inhibit egress.• Throughbolted trims for strength and security.• Variety of finishes, trims and styles to match other
Corbin Russwin products.
• Bar Length: Easily field cut to size. Standard 36" bar fits doors 31" (787mm) - 36" (914mm) - 30" (762mm) - 42" (1066mm) - 48" (1219mm).
• Door Thickness: Standard: 1-3/4" (44mm).• Backset: 2-3/4" (70mm) for 5/8" (16mm) stop. Device and trim cover standard ANSI
A115.2 (Type 161) cylindrical lock preparation.• Stile: Minimum width 5" (127mm).• Projection: 2-1/2" (64mm).• Latchbolt (Rim): 3/4" (19mm) stainless steel pullman type with stainless steel
deadlocking latch.• Alarm Kit: Optional on ED8200(B) devices; emits audible alarm, signaling emergency or
unauthorized use of door.• Dogging: Standard on ED8200 and ED8400 devices.• Cylinder: Optional, when specified.
Features Include:
Available Finishesfrom Stock
See page 59 foravailable finishes.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN5
7ED8000 Series Pushbar Functions
SurfaceVertical RodED8400/ED8400AInside Outside
RimED8200/ED8200BED8200AInside Outside Type
Exit Only
Dummy
Nightlatch
Classroom
Passage
Storeroom(LeverActive)
ANSI No.
F01
F02
F03
F08
—
F09
Function Description
- Exit only; no trim.
- Entrance by trim when actuating bar is locked down.
- Entrance by trim when latch bolt is retracted by key. Key removable only when locked.
- Entrance by knob or lever.Key locks or unlocks knob.
- Latch bolt retracted by grip.
- Entrance by knob or lever only when released by key. Key removable only when locked.
Note: Trims shown are for function representation only. See pages 9 and 10 for available trims.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
58
Lever: Die Cast ZincRose: Wrought Brass or BronzeCylinder: Key-in-Lever
Knob: WroughtRose: Wrought Brass or BronzeCylinder: Key-in-Knob
Lever: Die Cast ZincRose: Wrought Brass or BronzeCylinder: Key-in-Lever
Plate: SteelCylinder: RimAvailable in plated and painted finishes.
Pull: ExtrudedCylinder: Rim
Pull: ExtrudedCylinder: Rim
Pull: ExtrudedCylinder: RimAvailable in painted finishes only.
ED8000 Series Exit Devices Trim Designs
A6 G10
N6 F1
P1 P2
P8
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN5
9Exit Devices and Trims
How to Order Pushbar Exit Devices
FUNCTION TRIM FINISH HAND STRIKE MISC. CYL. DOORWIDTH
* * * * *ED4200 A610 G955 N810 612 RHR S02 M17 LCED4400 A655 G855 N855 613 LHR S03 M54 HS W030ED5200 A657 L910 N910 626 M58 CHS W042
ED5200A A910 L955 N955 689 M60 C6 W048ED5400 A955 L810 P150 690 M61 CL6
ED5400A A9M55 L855 P157 691 M62ED5600K A810 L910 P250ED5400L A855 L955 P257ED5400T C955 N610 P850ED8200 C855 N655 P857
ED8200A F150 N657 P950ED8200B F157 N910 P957ED8400 G1010 N955 T1310
ED8400A G1055 N7M55 T1355ED4800 T1410
ED5470B T1455ED5800A
Unless otherwise specified, exits will befurnished standard for RHR, 1-3/4" thickdoor, 36" width, L4 keyway cylinders (ifapplicable) x "0" bitted.
OPTIONS SYMBOL Strike – Rim x Vert. Rod S02
Strike – Flush Bottom (8400) S03Sex Nuts and Bolts M54
Shim Kit – Mortise/Rim M58Shim Kit – Vert. Rod M58
Exit Alarm (8200) M61Exit Alarm w/Delay M62
IC Core C6IC Core LC CL6
High Security IC Core CHSWidth 31" to 36" STD
Width 28" to 30" (8000) WO30Width 28" to 30" (8000) WO42
Width 43" to 48" WO48Cyl. Dogging L/C (4000/5000) M52
A6 • • •G10 • • •N6 • • •F1 • • •P1 • •P2 • •P8 • • •
TRIM
DES
IGN
612
613
626
689
690
691
FINISHES
A9 • •A8 • •C9 • •C8 • •G9 • •G8 • •L9 • • • •L8 • •N9 • • • •N8 • •T13 • •T14 • •F2 • •P9 • •
TRIM
DES
IGN
612
613
626
630
FINISHES
4000 / 5000 Series
8000 Series
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
60 ED6000 Series Crossbar Exit Device
Ideal for high-use situations.• Meets ANSI Grade 1 requirements.• Heavy-duty construction.• Base metals (brass, bronze and stainless steel) for
durability.• Easy-to-use crossbar operation for quick egress and
ADA compliance.• Dogging standard on all panic-listed devices.• Throughbolted trims for strength and security.• Wide range of finishes, trims and styles to match
other Corbin Russwin products.• Devices available to satisfy panic and fire opening
requirements.
• Bar Length: Easily field cut to size. Standard 36" (914mm) bar fits doors up to 36"(914mm). Optional 48" bar fits 36-1/2" (927mm) - 48" (1219mm) door.
• Door Thickness: Standard: 1-3/4" (44mm).• Stile (Rim): Minimum width with 1/2" (13mm) stop and standard strike: 4" (102mm).
With 5/8" (16mm) stop and standard strike: 4-1/8" (105mm).• Projection: 5-3/4" (146mm); 4-1/2" (114mm) depressed.• Cases: Heavy wrought, 7-1/4" (184mm) x 2-9/16" (65mm).
• Crossbar: Standard: 13/16" (21mm) x 1-3/8" (35mm) oval seamless tubing.• Warranty: One-year limited.
Features Include:
Available Finishes from Stock
See page 64 for available finishes.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN6
1ED7000 Series Crossbar Exit Device
Ideal for high-use situations on narrow and regular stiledoors in new construction and renovations.• Meets or exceeds ANSI Grade 1 requirements.• Heavy-duty construction.• Base metals (brass, bronze and stainless steel) for
durability.• Easy-to-use crossbar operation for quick egress and
ADA compliance.• Dogging standard on all panic listed devices.• Throughbolted trims for strength and security.• Wide range of finishes, trims and styles to match
other Corbin Russwin products.• Devices available to satisfy panic and fire opening
requirements.
• Bar Length: Easily field cut to size. Standard 36" bar fits doors up to 36" (914mm).Optional 48" (1219mm) bar fits 36-1/2" (927mm) - 48" (1219mm) door.
• Door Thickness: Standard: 1-3/4" (44mm).• Stile (Rim): Minimum width 2-1/2" (64mm) with standard 1/2" (13mm) stop.• Projection: 4-7/8" (124mm); 3-1/8" (80mm) depressed.• Cases: Heavy cast, 7-1/4" (184mm) x 1-1/4" (32mm).
• Crossbar: Standard: 13/16" (21mm) x 1-3/8" (35mm) oval seamless tubing.• Warranty: One-year limited.
Features Include:
Available Finishesfrom Stock
See page 64 foravailable finishes.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
62 ED6000 Series Trim Designs
Lever: CastEscutcheon: CastCylinder: Rim
Knob: Wrought reinforcedEscutcheon: CastCylinder: Rim
Lever: CastEscutcheon: CastCylinder: Rim
Lever: CastEscutcheon: CastCylinder: Rim
Lever: CastEscutcheon: CastCylinder: Rim
Grip: ExtrudedEscutcheon: WroughtCylinder: Rim
Grip: ExtrudedCylinder: Rim
C2 B3
N3 L2
PR2 T3
T5
Available Finishes from Stock
See page 60 for available finishes.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN6
3ED6000 / ED7000 Series Functions
StoreroomDummy Classroom ANSI
ANSI ANSI No. F03/F04Trim Design Passage No. F02 No. F08 F06/F09
B3 B310 B355
C2 C210 C255
N3 N310 N355
L2 L210 L255
PR2 PR255
T3 T310 T350 T355 T357
T5 T555 T557
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
B3 • •B4 (M) • •C2 • •C3 (M) • •N3 • •N4 (M) •L2 • •P4 •PR2 •T3 • •T5 • •T7 • •T9 • •T7M • •T9M • •
ED6000 / ED7000 Series Crossbar Exit Devices
How to Order Crossbar Exit Devices
FUNCTION TRIM FINISH HAND STRIKE MISC. CYL. DOORWIDTH
* * * * *ED6200 B310 T557 612 RHR S02 M17 LC
ED6200A B355 T710 626 LHR S03 M51 HS W048ED6400 B455 T750 S04 M53 CHS
ED6400A C210 T755 S05 M54 C6ED6410 C255 T757 S06 M65 CL6
ED6410A C355 B4M10 SB134 M67ED6450 G410 B4M55
ED6450A G455 C3M10ED6457 P457 C3M55
ED6457A PR255 T7M10ED6600 T310 T7M50
ED6600A T350 T7M55ED7200 T355 T7M57ED7400 T357 T9M10
T510 T9M50T550 T9M55T555 T9M57
OPTIONS SYMBOL Strike – Rim x Vert. Rod S02
Strike – Flush Bottom (6400) S03Mortise Adjustable (6200) S04
Open Rim Strike S05Threshold Bottom S06Open Back Strike SB134
Less Dogging M51Steel Reinforced Bar M53Sex Nuts and Bolts M54
Free Latching Latch Bolt M65Flush Transom Bolt M67
IC Core C6IC Core LC CL6
High Security IC Core CHSWidth up to 36" STDWidth up to 48" WO48
Unless otherwise specified, exits will be furnished standard forRHR, 1-3/4" thick door, 36" width, L4 keyway cylinders (ifapplicable) x "0" bitted.
TRIM
DES
IGN
612
626
FINISHES
64
For Corbin Russwin, Available For Immediate Shipment, See Our Manufacturers Parts Section.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
66 DC6000 Series Door Closers
Proven effective in high-use, high-abuse environments.Ensures reliable latching for access control and fire andbarrier-free code compliance. Ideal for virtually all dooropenings and draft conditions in both new and retrofitconstruction. 10-year limited warranty.
• Spring: DC6200 closers: multi-sized; fully adjustable 1 through 6. DC6400 closers:sizes 1 through 6; half-size adjustability.
• Body: Cast iron case with seamless one-piece forged steel spring tube.• Arm: Standard; heavy-duty forged steel.• Spindle: Triple heat-treated steel.• Piston: Precision machined, heat-treated steel.• Springs: Double heat-treated steel, tempered.• Backcheck: Multiple backcheck location valve permits choice of 70° or 90° backcheck
setting.• Valves: Backcheck intensity valve with safety feature. Latching and closing speed
standard. Delayed action optional.• Seals: O-rings.• Fluid: High lubricity hydraulic fluid standard.• Degree of Opening: Up to full
180° opening standard for regular, top jamb and parallel arm mountings.
Features Include:
Available Finishesfrom Stock
See page 79 foravailable finishes.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN6
7DC3200 Series Door Closers
The mid-priced, cost-effective choice for high traffic sit-uations. Ideal for both new construction and renova-tions while ensuring fire and barrier-free code compli-ance. 5-year limited warranty.
• Spring: DC3200 closers: multi-sized; fully adjustable 1 through 6.• Body: Cast iron case with seamless one-piece forged steel spring tube.• Arm: Standard; heavy-duty forged steel.• Spindle: Triple heat-treated steel.• Piston: Precision machined, heat-treated steel.• Springs: Double heat-treated steel, tempered.• Backcheck: Multiple backcheck location valve permits choice of 70° or 90° backcheck
setting.• Valves: Backcheck intensity valve with safety feature. Latching and closing speed standard.• Seals: O-rings.• Fluid: High lubricity hydraulic fluid standard.• Degree of Opening: Up to full
180° opening standard for regular, top jamb and parallel arm mountings.
Features Include:
Available Finishesfrom Stock
See page 79 foravailable finishes.
Regular Arm Mounting DC6200,DC6400 SeriesMost common mounting, providing thegreatest closing efficiency. Closer is mount-ed on the pull side, with the arm almostperpendicular to the face of the door. Armbracket is attached to the door frame.
Parallel Arm Mounting DC6210,DC6410 SeriesAllows inside application of closer on out-swinging doors. Closer is mounted on thepush side, with the arm almost parallel tothe face of the door. Arm does not projectfrom the opening.
Regular Arm Mounting with MortiseArm BracketUsed on inadequately reinforced frames,such as those with bull nose trims.
Parallel Arm with Offset AngleBracket MountingAllows parallel arm mounting when usedwith an overhead door holder.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
68 DC6000 / DC3200 Series
Door Closer Mountings
Narrow Frame MountingFor use when the frame is too narrow for a normal top jamb or top jamb trackmounting.
Top Jamb Deep Reveal MountingFor reveals greater than 3-1/4" (83mm), upto 7-1/4" (184mm).
Parallel Arm Mounting with FlushTransom BracketAllows parallel arm mounting on flush transom applications.
Top Jamb Flush Transom MountingCloser is top jamb mounted on the pushside; arm is attached to the door.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN6
9DC6000 / DC3200 SeriesDoor Closer Mountings
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
70 DC4600 Series Door Closers
Designed for light-duty applications, ideal for residences, offices and retail outlets.• Universal mounting.• Valve adjusts for closing and latching speeds.• Allows full 180° door opening.• Low projection – just 2-7/8" (73mm).• 2-year limited warranty.
• Spring: Sizes 2, 3, 4 and 5 available, non-adjustable.• Body: Cast aluminum.• Arm: Standard: steel main arm and tubular steel turnbuckle frame.• Spindle: Precision machined steel.• Piston: Precision machined steel.• Springs: Tempered steel.• Valve: Standard: 2 closing speed valves adjust closing speed and latching speed.
Backcheck intensity valve buffers door opening after 70°.• Seals: O-rings.• Fluid: High lubricity hydraulic fluid standard.• Degree of Opening: Up to full 180° opening standard for regular, top jamb and parallel
arm mountings, conditions permitting.
Features Include:
Available Finishesfrom Stock
See page 79 foravailable finishes.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN7
1DC4600 Series Door Closer Mountings
Regular Arm MountingMost common mounting, providing thegreatest closing efficiency. Closer is mount-ed on the pull side, with the adjustable armperpendicular to the face of the door. Armbracket is attached to the door frame.Requires minimum 2-1/2" (63mm) top rail,maximum 1/8" (3mm) reveal. Order ModelNo. DC4600.
Parallel Arm MountingAllows inside application of closer on out-swinging doors. Closer is mounted on thepush side, with the arm almost parallel tothe face of the door. Arm does not projectfrom the opening. Requires minimum 5"(127mm) top rail without drop plate, 3-1/8"(79mm) top rail when drop plate is used.Order Model No. DC4610.
Top Jamb MountingAccommodates reveals up to 2-7/8"(73mm) and 180° door opening. Closer ismounted on the push side, with theadjustable arm perpendicular to the face ofthe door. Arm bracket is mounted on thedoor. Requires minimum 1-3/8" (35mm) toprail. Maximum reveal 2-7/8" (73mm). OrderModel No. DC4620.
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
• Heavy-duty forged arm• Captured valves• Self-drilling screws• Double heat-treated steel pinion• Universal QUIK-INSTALL™ bracket• Tri-packed assembly• Cast-iron body• Retrofit plates• Powder painted arms
• Spring: Sizes; multi-sized; fully adjustable sizes 1- 6. Factory pre-size upon request.• Body: Cast Cast-iron case with seamless cold headed steel spring tube.• Arm: Standard: heavy-duty forged steel. Arm options pages 74-76.• Spindle: Cold headed heat-treated steel.• Piston: Precision machined, heat-treated steel.• Springs:Chrome silicon wire.• Valve: Delayed action valve optional. Delayed action preset for 20 seconds. Between 90°
and 70° for all mountings. To order specify M71.• Seals: O-rings.• Fluid: High lubricity extreme temp hydraulic fluid standard.• Degree of Opening: Up to full 180° opening standard for regular, top jamb and parallel
arm mountings, conditions permitting.
Features Include:
DC8200 Series Door Closers72
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN
Regular Arm MountingMost common mounting, providing thegreatest closing efficiency. Closer is mount-ed on the pull side, with the arm almostperpendicular to the face of the door. Armbracket is attached to the door frame.
Parallel Arm MountingAllows inside application of closer on out-swinging doors. Closer is mounted on thepush side, with the arm almost parallel tothe face of the door. Arm does not projectfrom the opening.
DC8200 Series Door Closer Mountings
Top Jamb MountingAccommodates reveals up to 3-1/4"(83mm). Closer is mounted on the frame onthe push side, with the arm perpendicularto the face of the door. Arm bracket ismounted on the door. Minimum 1-3/4"(44mm) top jamb required.
*8210 can be converted to Top Jamb Mount
73
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
DC6000/8200 Series Door Closer Arm Options
Regular Arm• Used with Regular Arm mounting (pull
side) and Top Jamb mounting (push side)• Non Hold-Open arm standard on the
DC6200 and DC6400 closers• Hold-Open arm optional, specify closer x
A1*
Heavy-Duty Regular Arm• Recommended for high-use, high-abuse
environments• Tamper-resistant, solid forged steel
riveted arm• Mounted on pull side• Optional on DC6200 and DC6400 closers,
specify closer x A10
Parallel Arm• Mounted on push side• Non Hold-Open arm – combines regular
arm with parallel arm mounting bracket• Hold-Open arm – combines regular hold-
open arm with parallel arm mountingbracket
• Non Hold-open arm standard – orderDC6210 series
• Hold-Open arm optional, specify closer xA1*
74
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
INDC6000/8200 Series
Door Closer Arm Options
Heavy-Duty Parallel Arm• Recommended for high-use, high-abuse
environments• Tamper-resistant, solid forged steel
riveted arm• Mounted on push side• Optional on DC6210 and DC6410 closers• Non Hold-Open arm, specify closer x A3
Heavy-Duty Reversible BackstopParallel Arm• Tamper-resistant, solid forged steel rivet-
ed arm (mounted on push side)• Field-reversible steel lug restricts degree
of opening to protect door, wall and hard-ware
• Requires both backcheck valves on closer• Shipped standard as left hand. Handing
can be reversed in the field• Optional on DC6210 closer• Non Hold-Open arm, specify closer x A4• Hold-Open arm, specify closer x A5*
Heavy-Duty Spring Stop Parallel Arm• Recommended for high-use, high-abuse
environments• Integrates a door closer, shock absorber
and auxiliary heavy-duty overhead stop• Requires both backcheck valves on the
closer• Hold-Open*
- Holder mechanism tension adjustable- Hold-open can be engaged/disengaged
• Order with DC6210 closer• Non Hold-Open arm, specify closer x A11• Hold-Open arm, specify closer x A12
75
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
DC3200 SeriesDoor Closer Arms
Regular Arm• Used with regular arm mounting (pull
side).• Standard on DC3200 closer.• To order separately, specify 540F10-8 x
Finish.
DC3200 Series
DC4600 Series
Regular Arm with Hold Open*• Permits door to remain in hold open posi-
tion.• Optional on DC3200 closer series; specify
Quick• Code A1. To order separately, specify
540F12-8 x Finish.
Regular Arm• Used with regular arm mounting (pull
side) and top jamb mounting, up to 2-7/8"(73mm) frame reveal (push side).
• Standard on all DC4600 closers.
Regular Arm with Hold-Open*• Permits door to remain in hold-open
position.• Used with regular arm mounting (pull
side) and top jamb mounting (push side).• Optional on all DC4600 closers; Specify
closer x A1.
76
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
Door CloserMounting Brackets
Parallel Arm Non Hold-Open Bracket• Converts regular arm to parallel arm closer• Standard with parallel arm mounting• Packed with five screws and 691F78 spacer
Parallel Arm Offset Bracket• Required when parallel arm is used in conjunction
with an overhead door holder• Specify closer x M83
Parallel Arm Flush Transom Bracket• Required when parallel arm mounting is used on
a flush transom application• Not available in plated finishes• Specify closer x M82
Drop Plate• Permits parallel arm or top jamb mounting on
door when top rail is too narrow or frame condi-tions will not permit closer to be installed in theregular manner.
• To order separately, specify Part No. x Finish.
Slim Cover• Optional on all DC6000/DC3200 Series Door
Closers.• Non-handed. Cap covers bottom of spindle.• Dimensions: 11-5/8" x 2" x 2-3/4" deep. Available
in painted finishes only. Specify Quick Code M76.To order separately for DC6000 and DC3210closers, specify 387F40 x Finish.
78
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
IN
How to Order Door Closers
SERIES & SIZE ARM FINISH HAND MISC.* * *
DC6210 A1 689 RH M71DC6412 A3 690 LH M73DC6413 A4 691 M76DC6414 A5 696 M80DC6415 A10 M82DC6416 A11 M83DC3210 A12DC4612DC4613DC4614DC4615DC8210
DC6000 / DC3000 / DC4600 / DC8200 SeriesDoor Closers
OPTIONS SYMBOL Regular Arm STD
Hold Open Arm A1Heavy Duty Parallel Arm A3
Heavy Duty Backstop A4Heavy Duty Backstop w/HO A5
Heavy Duty Regular Arm A10Heavy Duty Spring Stop P/A A11
Heavy Duty Spring Stop P/A w/HO A12Sex Nuts and Bolts M54
Delayed Action (2210) M71Full Metal Cover (Handed) M73
Slim Cover M76Narrow Jamb Plate M80
P/A Flush Transom Bracket M82P/A Offset Bracket M83
Unless otherwise specified, door closers will be furnished stan-dard from Akron Hardware for parallel arm, top jamb and regu-lar mounting options with sex nuts and bolts.
6000 • • • •3200 • • • •4600 • • •8200 • • • •
CLOSE
R SERIES
689
690
691
696
FINISHES
Call our Sales department - toll free - for current pricing on all Corbin Russwin products
79
CO
RB
IN R
US
SW
IN
Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070
Access 800Programmable Keyless Entry System
The Access 800™ programmable keyless entry system isideal for institutional, commercial and industrial appli-cations. Features include keypad, proximity card andradio frequency remote access. Time zone and holidayscheduling, as well as report generation, is controlledthrough easy-to-use database platform managementsoftware.
Call for availability.
100 USERS• Available with ML2000 Mortise and CL3300 Cylindrical locks and ED5000 exit device
trim for Rim, SecureBolt™ and Mortise.• 100 different user codes per lock.• Audit trail of the last 15 events.• Quick Code designation M800 (standard).• Self-contained microprocessor with non-volatile memory; ensures codes are not lost
even if batteries fail.• Codes can vary from 1 to 6 digits.• Programming is done at the keypad with over 1.1 million possible user codes.
2000 USERS• Available with ML2000 Mortise and CL3300 Cylindrical locks and ED5000 exit device
trim for Rim, SecureBolt™ and Mortise.• 2000 different user codes per lock.• 2000 event transaction history.• Quick Code designations
- M801 Keypad only- M802 Prox only- M803 Keypad & Prox- M804 Keypad and RF- M805 Prox and RF- M806 Keypad, Prox and RF
• RF enhanced technology.• Codes can vary from 1 to 6 digits.• Easily programmable at keypad for basic features (M801, M803, M804 and M806 options);
software programming required for M802 and M805 or where time zones are required • 32 holidays (16 single and 16 block).• Master, Supervisory, Emergency and Passage codes.• One-time User codes.
Features Include:
80
Easy-to-use, password-protected software allows import of existing CSV formatted data-bases and provides wireless data transfer via PDA to the controller.Accessware™ with Accessware HH PDA Communication Software:• Software operates with Microsoft Windows 98 or higher operating systems.• Password-protected security management system; access level format.• 10,000 user name database; can import names from existing database.• Directly supports HID 26,33 and 34 bit formats (For 35 bit HID
Corporate format, consult factory).• Utilizes Palm OS PDA (wireless) data transfer for programming and
auditing locks.
Visit us on the web at www.akronhardware.com
CO
RB
IN R
US
SW
INAccess 800
Programmable Keyless Entry System
• Free-floating spindle design.• Available in (4) different functions
- ML20833 - Entry lock without cylinder override- ML20834 - Entry lock with cylinder override- ML20835 - Entry lock with deadbolt and without cylinder override- ML20836 - Entry lock with deadbolt and cylinder override
• Available in all cast lever designs – LS, RS, SM, NS, AS, DS, ES, PS, MS,FS, ZS & TS.
• New escutcheon design designation is Z (example NSZ).• Available finishes – 605, 606, 611, 612, 613, 625, 626 & 629.• Typical 75,000 operations per set of batteries.
ML20800 Mortise Lock
• CL3300 Patented Lever Release design.• CL33834 - Entry lock with key override.• One piece inside and outside escutcheon.• Available in AZ, NZ and PZ lever designs.• New escutcheon design designation is Z (example NZZ).• Available finishes – 605, 606, 611, 612, 613, 625 and 626.• Typical 80,000 operations per set of batteries.• Meets ANSI/BHMA 156.2 Grade 1 requirement.
CL33800 Cylindrical Lock
• For use with SecureBolt™, Rim and Mortise exit devices.- 9833 & 9M833 - Entry trim without cylinder override.- 9834 & 9M834 - Entry trim with cylinder override.
• Newly designed heavy-duty trim escutcheon.• Retrofits to existing Rim and SecureBolt™ installations.• Typical 90,0000 operations per set of batteries.• ANSI/BHMA Grade 1 and UL fire and panic listed.Call for availability.
ECT 9800 Trim for ED5000 Exit Device
Software
81