+ All Categories
Home > Documents > Aladin MK II Broadcast Solutions - Chrosziel · For further information on the Aladin MK II, about...

Aladin MK II Broadcast Solutions - Chrosziel · For further information on the Aladin MK II, about...

Date post: 29-Aug-2019
Category:
Upload: lekhue
View: 216 times
Download: 0 times
Share this document with a friend
4
Chrosziel GmbH, Klausnerring 6, D-85551 Kirchheim b. München | Phone +49 89 90 10 91 0 Fax +49 89 44 70 86 1 | E-Mail [email protected] | Web www.chrosziel.com Managing Directors: Harm Abrahams, Jürgen Nußbaum | HRB 158740 Amtsgericht München | VAT | ID Nr. DE 249425648 | For our deliveries and services solely our General Terms of Trade apply. Aladin MK II Broadcast Solutions Control of Broadcast Camera Functions (Video Return, Talkback, F/I/Z follow) • Support of analogue and digital broadcast (lens) remote control equipment • Support of OB vehicle RCP signals • Support of digital serial protocol RS • Power supply from camera or fibreglass adapter • Set up with on board display (no handunit needed) • After power loss, no adjustments need to be done • Remote camera start / stop signal Overview of most important broadcast features: Applications The Aladin MK II controls Focus, Zoom and Iris of PL-mount, ENG and similar lenses via standard external motors or internal lens decoder motors. Furthermore, camera functions like Video Return and Talkback Switching, Focus / Iris / Zoom Follow, digital RCP Read Out and Tally are supported. The camera operator’s common remote demands can be used for Focus, Zoom-, Video Return and Talkback operation. Adapter cables and wireless controls are available for Crane, SteadiCam, Helicopter and similar applications. For RCP control from the OB vehicle (e.g. 12-Pin Hirose Lens Port) or serial control by the Aladin Iris hand control slider, further adapter cables are available. The lens motors (e.g. Iris) can be controlled via standard lens control equipment, serial RS connection (e.g via fibreglass adapters or serial cable), BNC connection or wireless. The Aladin MK II can be powered via the power outlet of the fibre adapter or camera. Remote camera start / stop control is supported via Broadcast Zoom Demands or Aladin hand controller. Broadcast goes Cine Style Aladin goes Broadcast SteadiCam Remote OB Vehicle Remote Control Aladin Handcontroller Joystick Panel Remote Broadcast Remote Demands Tally Signal Focus / Iris / Zoom Position (Follow) Video Return / Talkback Control External Lens Motors Control Internal Servo Lens Motors Control Camera Start/Stop, Power from Camera
Transcript

Chrosziel GmbH, Klausnerring 6, D-85551 Kirchheim b. München | Phone +49 89 90 10 91 0 Fax +49 89 44 70 86 1 | E-Mail [email protected] | Web www.chrosziel.comManaging Directors: Harm Abrahams, Jürgen Nußbaum | HRB 158740 Amtsgericht München | VAT | ID Nr. DE 249425648 | For our deliveries and services solely our General Terms of Trade apply.

Aladin MK II Broadcast Solutions

• Control of Broadcast Camera Functions (Video Return, Talkback, F/I/Z follow)

• Support of analogue and digital broadcast (lens) remote control equipment

• Support of OB vehicle RCP signals

• Support of digital serial protocol RS

• Power supply from camera or fibreglass adapter

• Set up with on board display (no handunit needed)

• After power loss, no adjustments need to be done

• Remote camera start / stop signal

Overview of most important broadcast features:

Applications

The Aladin MK II controls Focus, Zoom and Iris of PL-mount, ENG

and similar lenses via standard external motors or internal lens

decoder motors. Furthermore, camera functions like Video Return

and Talkback Switching, Focus / Iris / Zoom Follow, digital RCP Read

Out and Tally are supported. The camera operator’s common remote

demands can be used for Focus, Zoom-, Video Return and Talkback

operation. Adapter cables and wireless controls are available for

Crane, SteadiCam, Helicopter and similar applications. For RCP

control from the OB vehicle (e.g. 12-Pin Hirose Lens Port) or serial

control by the Aladin Iris hand control slider, further adapter

cables are available. The lens motors (e.g. Iris) can be controlled

via standard lens control equipment, serial RS connection (e.g via

fibreglass adapters or serial cable), BNC connection or wireless. The Aladin MK II can be powered via the power outlet of the fibre

adapter or camera. Remote camera start / stop control is supported via Broadcast Zoom Demands or Aladin hand controller.

Broadcast goes Cine StyleAladin goes Broadcast

SteadiCamRemote

OB VehicleRemote Control

AladinHandcontroller

JoystickPanel Remote

BroadcastRemote Demands

Tally Signal

Focus / Iris / ZoomPosition (Follow)

Video Return / TalkbackControl

External LensMotors Control

Internal Servo LensMotors Control

Camera Start/Stop,Power from Camera

Chrosziel GmbH, Klausnerring 6, D-85551 Kirchheim b. München | Phone +49 89 90 10 91 0 Fax +49 89 44 70 86 1 | E-Mail [email protected] | Web www.chrosziel.comManaging Directors: Harm Abrahams, Jürgen Nußbaum | HRB 158740 Amtsgericht München | VAT | ID Nr. DE 249425648 | For our deliveries and services solely our General Terms of Trade apply.

Freedom of choice and costsLately the Broadcast environment has seen a strong market development

towards Cine-Style equipment and PL-Mount lenses. 4K cameras with

fibreglass adapter and Cine-Look TV cameras like the Sony F55 / CA-

4000, Canon C500 or Ikegami HDK-97ARRI are now available. However,

PL-Mount lenses with internal motors are rare and expensive. B4 to

PL-Mount Converter noticeably affect the image quality and significantly

reduce the F-Stop. The Aladin MK II is not only affordable but it gives the

DoP, Director and technicians the freedom of choice to use their preferred

and available lenses. Since all settings of the Aladin MK II can be altered

via display and the buttons of its main unit, there is even no need for a

hand unit. RS serial signals, RCP commands and Video Return / Talkback

functions are supported and ensure the common broadcast workflows. No

extra cables need to be pulled saving time, staff and money. Furthermore, no additional new hardware is needed because of the support

of existing analogue and digital equipment by the Aladin hardware reducing the overall investment costs.

• Adjustable back-lash compensation eliminating lens play

• Lens data and global settings storing / loading via USB

• Metadata USB recording and streaming

• Time code in (LTC)

Additional Features you don’t want to miss:• Digital wireless transmission in the safe and less used 434 / 869 MHz band

• Wide power-supply voltage range supported from 10 to 34 Volts

• S3D support with up to 14 motors (optional)

• Roll and Tilt sensor (optional)

Challenges successfully met in Live BroadcastThe Aladin MK II was examined by professionals in

diverse Broadcast Application like the Live HD Cut Out

and Super Zoom in a 4K frame for the Live Broadcast

of the Soccer Champions League match Schalke vs.

Chelsea or the first Eutelsat 4K Sports Live Broadcast

at the famous French Open Tennis tournament in

Paris. The challenges of the high 4K resolution were

met precise and reliable by the Aladin MK II with no

backlash and instantaneous control like no other

device. The Iris was comfortably controlled remotely

from the OB vehicle via RCP at the Champions League

and via RS signal at the French Open. The camera

operator focused and zoomed via his usual lens

remote demands. At the Soccer Live Broadcast, the

setup included the Sony F55 with the Sony CA-4000

fibreglass adapter, Canon Zoom 30-300, 3 Betz BTM

Digital motors and the Aladin MK II. For the French

Open, the Canon C500 camera was used instead of

the Sony F55.

Aladin MKII in a Live 4K Setup at the French Open, Paris

Virtual Super Zoom at the Champions League, Schalke

Chrosziel GmbH, Klausnerring 6, D-85551 Kirchheim b. München | Phone +49 89 90 10 91 0 Fax +49 89 44 70 86 1 | E-Mail [email protected] | Web www.chrosziel.comManaging Directors: Harm Abrahams, Jürgen Nußbaum | HRB 158740 Amtsgericht München | VAT | ID Nr. DE 249425648 | For our deliveries and services solely our General Terms of Trade apply.

This Kit includes all necessary hardware, cables and accessories needed to power the system, to control Focus, Iris, Zoom, Video Return

and Talk Back via RCP / common remote demands like Canon / Fujinon, to connect common digital motors and to mount the system on rods.

Kits, ready to shoot and with price advantage.Aladin MK II Broadcast Kits

Basic Setup Kit (art.no.: AL2-BC1KIT)

Basic Setup Kit Including Motors

Special Broadcast Price

15.625,00 € 15.265,00 €(art.no.: AL2-BCBKIT) (art.no.: AL2-BCHKIT)

This Kit includes all parts from the Basic Setup Kit and additionally three Betz BTM or Heden M26VE digital lens motors.

Betz Heden

9.715,00 €

Chrosziel GmbH, Klausnerring 6, D-85551 Kirchheim b. München | Phone +49 89 90 10 91 0 Fax +49 89 44 70 86 1 | E-Mail [email protected] | Web www.chrosziel.comManaging Directors: Harm Abrahams, Jürgen Nußbaum | HRB 158740 Amtsgericht München | VAT | ID Nr. DE 249425648 | For our deliveries and services solely our General Terms of Trade apply.

For further information on the Aladin MK II, about reference projects and for individual offers please contact us at [email protected], find more on www.chrosziel.com or contact the local Chrosziel sales representative.

SteadiCam Extension Kit(art.no.: AL2-BCT400KIT)

Special Broadcast Price

5.474,00 €

This Kit is an extension kit to the Basic Setup Kits and includes

all necessary hardware, cables and accessories needed to

control the Focus wirelessly via hand unit and power the

system through common SteadiCam-Power-Outlets.

Iris Slider Extension Kit(art.no.: AL2-BCIKIT)

Special Broadcast Price

4.613,00 €

This kit is an extension kit to the Basic Setup Kit and includes

all necessary hardware, cables and accessories needed to

control the Iris via RS-Protocol through long distances in case

RCP control is not possible or wanted.

This Kit includes all necessary hardware, cables and accessories needed to power the system, to control the internal focus motor wirelessly

and to mount the system on rods.

ENG - Cabrio Lenses SteadiCam Kit (art.no.: AL2-BCSTDKIT) 10.630,00 €

(art.no.: 401-F235KIT)This kit includes all necessary hardware to mount the Sony

PMW F5 / 55 and to support the lens on 19mm rods including

19mm rods.

(art.no.: 401-450KIT)

19mm Universal Lens Support Kit 1290,00 € 15mm Universal Lens Support Kit 535,00 €

This kit includes all necessary hardware to mount the Canon C

series, BMD or Sony camera and to support the lens on 15mm

rods including 15mm rods.

Chrosziel GmbH, Klausnerring 6, D-85551 Kirchheim b. München | Phone +49 89 90 10 91 0 Fax +49 89 44 70 86 1 | E-Mail [email protected] | Web www.chrosziel.comManaging Directors: Harm Abrahams, Jürgen Nußbaum | HRB 158740 Amtsgericht München | VAT | ID Nr. DE 249425648 | For our deliveries and services solely our General Terms of Trade apply.


Recommended