Appendix ASTATE OF WASHINGTON PUBLIC SAFETY SYSTEM: SINGLE RACK CONFIGURATION & MANAGEMENT5620 Network Manager, 7270MSC, 3630, 7470MSP and 3600 Product CatalogMDR-8000 Discount:45%5620 Discount:50%7270 Discount57%3630 Discount50%7470 Discount50%3600 Discount50%TOTAL SINGLE RACK SYSTEM PRICE=$108,307*as configured below; please contact Alcatel for help with engineering and configurationEach rack pricing shall contain and/or include: 3 ea. WSCA compliant 6 GHz Sonet-OC3, space diversity capable microwave terminal. 1 ea. Multi-Service Platform (ATM)Router with 2ea 1-Port OC3, 1ea 3-port DS3, 1ea 4-Port Ethernet and 1ea 8-Port T1 Cards.as a standard configuration. 2 ea. T1/E1 Channel Bank Multiplexer with 2 FXO, 2 FXS and 12 4-wire E&M Channel Ports as a standard configuration. 1ea 1RU Fuse Panel 1ea Rack Isolation and Bracing Kit (per R56 Standard) Option to add DS3 WSCA compliant Microwave radioEach rack will need to reserve room for: VF Jackfield (2RU) T1 / Ethernet RJ045 Jackfield (1RU) Wayside T1 Router (1RU) Wayside Ethernet 16 port switch ( 1 RU)Network Management: All OC3 & DS3 Radios, Multi-Service Platform (ATM) Routers and T1/E1 Channel Bank Multiplexers Management System.must be managed by a single Network Management System. Pricing based on the following EN Point value table for different equipment:7470=40 Equivalent Node Value (EN) Points7270=20 Equivalent Node Value (EN) Points3600=10 Equivalent Node Value (EN) Points3630=5 Equivalent Node Value (EN) PointsMDR 8000 = 2 Equivalent Node (EN) PointsSINGLE RACK LAYOUT DIAGRAMMICROWAVE EQUIPMENT INCLUDED IN ABOVE SYSTEM BY LINE ITEMPart NumberDescriptionList PriceDiscounted WSCA Contract 02702 priceQtyComplete Microwave RackMDR-8706s-155-29-NS-HS 3 each 6 GHz OC-3, space diversity radios with +29 dBm power output,$134,136$60,36117 Seismic rack, 19 wide, with PDU, and grounding kitTotal60,3617270 MULTISERVICE PLATFORM INCLUDED IN ABOVE SYSTEM BY LINE ITEMPart NumberDescriptionList PriceDiscounted WSCA Contract 02702 priceQtyShelves and Switching Fabric90-4442-027270 8 SLOT DC SYSTEM clei4,0001,720190-4453-037270 HUB CARD - 6 & 8 SLOT SYSTEMS clei2,5001,0752Control and Service Cards90-4452-527270 CONTROL CARD with ePM8,0003,440290-6499-01STRATUM 3 SSU MODULE clei8003442Interface and Application Cards90-4455-217270 T1 8 PORT CE CARD R4.3 clei7,0003,010190-4460-017270 T1 8PORT I/O CARD clei1,200516190-4456-227270 OC3-2M CR CARD9,8004,214290-4462-017270 OC3/STM1 SR (MMF) I/O clei750323290-4458-257270 DS3 3 PRT CR W/CPU-2 (13.5K) clei11,5004,945190-4463-017270 DS3/E3 3P BNC I/O CARD clei700301190-6602-317270 10/100 MB ETHERNET CARD R5.0 clei5,0002,150190-6603-017270 E-NET 4P 10/100BASE-T I/O clei2,1009031Miscellaneous90-4444-0148V DC POWER SUPPLY clei700301490-6893-017270 ONLINE DOCN CD3501511Total33,6903630 CHANNEL BANK INCLUDED IN ABOVE SYSTEM BY LINE ITEMPart NumberDescriptionList PriceDiscounted WSCA Contract 02702 priceQtyShelves and Switching Fabric90-0412-683630 R5.3 T1 48VDC SYSTEM W SLIDER5,3502,6752Interface and Application Cards90-0156-06FXS (LGS) MODULE (+4/-10DB) clei350175290-0157-03E&M MODULE (+4/-10 DB) clei3501751290-0466-01LINE VOLTAGE MODULE250125290-0526-03FXO (LGE) MODULE (+4/-10DB) clei400200290-0567-01T1 LIM MODULE clei350175490-0433-033630 R5 Paper Documentation150752Total9,3005620 NETWORK MANAGEMENT SYSTEM INCLUDED IN ABOVE SYSTEM BY LINE ITEMPart NumberDescriptionList PriceDiscounted WSCA Contract 02702 priceQtyExample of Basic 5620 Software for a Network of 55 Single RacksMicrowave Terminal 55x3x2 EN Pts3307270 Multi-Service ATM Router 55x20 EN Pts1,1003630 Channel Bank Multiplexer 55x2x5 EN Pts550Total EN Pts1,98090-0617-855620 NETWORK MANAGER R6.1 CD-ROM MEDIA0.00.0190-9583-855620 NM R6.1 BASE PRODUCT50,00025,000190-4582-855620 NM R6.1 CUSTOMER DOC'N CD10050190-1524-855620 NM R6.1 EN LICENSE2501251,980Total 55 Racks272,55055Total Price per Rack4,956TOTAL SINGLE RACK SYSTEM PRICE=$108,307*as configured above; please contact Alcatel for help with engineering and configurationADDITIONAL OPTIONS FOR THE PUBLIC SAFTEY SYSTEM--PLEASE CONTACT ALCATEL FORHELP WITH ENGINEERING AND CONFIGURATIONPart NumberDescriptionList PriceDiscounted WSCA Contract 02702 price5620 NM90-0617-855620 NETWORK MANAGER R6.1 CD-ROM MEDIANo ChargeNo Charge90-9583-855620 NM R6.1 BASE PRODUCT$50,000$25,000.0090-9584-xx5620 NM BASE PRODUCT UPGRADE TO Rx.x$25,000$12,500.0090-1524-855620 NM R6.1 EN LICENSE$250$125.0090-1493-xx5620 NM R6.1 TO Rx.x EN LICENSE UPGRADE$125$62.5090-1450-855620 NM R6.1 OPERATOR POSITION$11,000$5,500.0090-1636-855620 NM R6.1 SIMULATOR$15,000$7,500.0090-1636-xx5620 NM SIMULATOR UPGRADE TO Rx.x$0.0090-2648-855620 NM R6.1 OPENSNMP NO HPOV$7,000$3,500.0090-3141-855620 NM R6.1 VBN PARTITIONS QTY.1$10,000$5,000.0090-3141-865620 NM R6.1 VBN PARTITIONS PKG OF 4$30,000$15,000.0090-4931-855620 NM R6.1 DIST. STATS COLLECTOR$50,000$25,000.0090-0657-855620 NM R6.1 PRINTED DOCN PAPER COPY$3,000$1,500.0090-4582-855620 NM R6.1 CUSTOMER DOC'N CD$100$50.0090-4583-855620 NM R6.1 INSTALL & UPGRADE GUIDE$60$30.0090-6767-855620 NM R6.1 MAINT. PROCEDURE PAPER COPY$50$25.0090-7120-855620 NM R6.1 ADVANCED CONFIGURATION GUID$75$37.5090-7121-855620 NM R6.1 STAT GUIDE$75$37.5090-7635-855620 NM R6.1 FAULT MANAGEMENT PAPE DOC'N$75$37.5090-7636-855620 NM R6.1 FAULT MANAGEMENT PAPE DOC'N$75$37.5090-7727-855620 NM R6.1 TROUBLE TICKET REF GUIDE$75$37.5090-8058-855620 NM R6.1 SYSTEM ADMIN PAPER DOC'N$100$50.0090-8059-855620 NM R6.1 NW CONFIG. PAPER DOC'N$75$37.5090-8060-855620 NM R6.1 TROUBLESHOOTING PAPER DOC'N$75$37.5090-8065-855620 NM R6.1 STATISTICS COLLECTOR DOC'N$75$37.5090-8776-855620 NM R6.1 PERFORMANCE MGN'T DOC'N$100$50.0090-8777-855620 NM R6.1 ALARM SURVEILLANCE DOC'N$250$125.0090-8778-855620 NM R6.1 GLOSSARY DOC'N$75$37.5090-9070-855620 NM R6.1 SMA REFERENCE DOC'N$100$50.0090-9246-855620 NM R6.1 CONFIGURATION FORM REF GUID$100$50.005620 CMIP90-7428-855620 CMIP R6.1 BASE PRODUCT$15,000$7,500.0090-7428-xx5620 CMIP BASE PRODUCT UPG. TO Rx.x$7,500$3,750.0090-7443-855620 CMIP R6.1 FULL EN LICENSE$100$50.0090-7443-xx5620 CMIP Rx.x FULL EN LICENSE UPGRADE$50$25.0090-9671-855620 CMIP ENGINE R6.1 EN LICENSE$25$12.5090-9672-xx5620 CMIP ENGINE Rx.x EN LICENSE UPG$13$6.2590-9652-855620 CMIP ALARM MGMT R6.1 EN LICENSE$25$12.5090-9653-xx5620 CMIP ALARM MGMT Rx.x EN LIC. UPG.$13$6.2590-9657-855620 CMIP TEST. MGMT R6.1 EN LICENSE$15$7.5090-9658-xx5620 CMIP TEST. MGMT Rx.x EN LIC. UPG.$8$3.7590-9661-855620 CMIP PROV. MGMT R6.1 EN LICENSE$35$17.5090-9662-xx5620 CMIP PROV. MGMT Rx.x EN LIC. UPG.$18$8.7590-9597-855620 CMIP R6.1 ADD'L CMIP GATEWAY$12,000$6,000.0090-9598-855620 CMIP ADD'L CMIP GTWAY UPG TO Rx.x$6,000$3,000.0090-9622-855620 CMIP R6.1 DEVELOPMENT SYSTEM$25,000$12,500.0090-9622-xx5620 CMIP DEVELOPMENT SYS. UPG TO Rx.x$12,500$6,250.0090-7444-855620 CMIP R6.1 TECH REF GUIDE$200$100.005620 CORBA90-7688-855620 CORBA R6.1 BASE PRODUCT$15,000$7,500.0090-7688-xx5620 CORBA BASE PRODUCT UPG TO Rx.x$7,500$3,750.0090-7690-855620 CORBA R6.1 FULL EN LICENSE$100$50.0090-7690-xx5620 CORBA Rx.x FULL EN LICENSE UPGRADE$50$25.0090-9636-855620 CORBA ENGINE R6.1 EN LICENSE$25$12.5090-9637-xx5620 CORBA ENGINE Rx.x EN LICENSE UPG.$13$6.2590-9641-855620 CORBA ALARM MGMT R6.1 EN LICENSE$25$12.5090-9642-xx5620 CORBA ALARM MGMT Rx.x EN LIC. UPG.$13$6.2590-9645-855620 CORBA TEST. MGMT R6.1 EN LICENSE$15$7.5090-9646-xx5620 CORBA TEST. MGMT Rx.x EN LIC. UPG$8$3.7590-9667-855620 CORBA PROV. MGMT R6.1 EN LICENSE$35$17.5090-9668-xx5620 CORBA PROV. MGMT R6x.x EN LIC. UPG$18$8.7590-9595-855620 CORBA R6.1 ADD'L CORBA GATEWAY$12,000$6,000.0090-9596-855620 CORBA ADD'L CORBA GTWAY UPG TO R6.1$6,000$3,000.0090-9621-855620 CORBA R6.1 DEVELOPMENT SYSTEM$25,000$12,500.0090-9621-xx5620 CORBA DEVELOPMENT SYS. UPG. TO Rx.x$12,500$6,250.0090-7687-855620 CORBA R6.1 TECH REF GUIDE$200$100.005620 AIM90-9034-855620 AIM WORKSTATION R6.1 BASE PRDCT$50,000$25,000.0090-9627-xx5620 AIM W/S BASE PROD. UPGRADE TO Rx.x$25,000$12,500.0090-9201-855620 AIM SERVER R6.1 BASE PRODUCT$90,000$45,000.0090-9628-xx5620 AIM SERVER BASE PROD. UPGR. TO Rx.x$45,000$22,500.0090-9199-855620 AIM R6.1 EN LICENSE$10$5.0090-9599-xx5620 AIM EN LICENSE UPGRADE TO Rx.x$5$2.5090-9202-855620 AIM SERVER R6.1 ADDITIONAL GUI$20,000$10,000.0090-9034-865620 AIM R6.1 WORKSTATION T&E SOFTWARENo ChargeNo Charge90-9201-865620 AIM R6.1 SERVER T&E SOFTWARENo ChargeNo Charge90-9685-85CONVERT 5620 AIM R6.1 W/S TO SERVER R6.1$40,000$20,000.00NICs90-2095-12CPSS ATM SBUS NIC$1,495$1,495.0090-6708-01SPRITE CPSS PCI NIC T1 W/CSU R1.0$7,700$7,700.0090-6708-01-03SPRITE CPSS PCI NIC T1 W/CSU R1.0$7,700$7,700.0090-6708-02SPRITE CPSS PCI NIC T1 W/DSX-1 R1.0$7,700$7,700.0090-6708-02-06SPRITE CPSS PCI NIC T1-WCOM FAA$7,700$7,700.0090-6708-03SPRITE CPSS PCI NIC E1 120 OHM R1.0$8,200$8,200.0090-6708-04SPRITE CPSS PCI NIC E1 75 OHM R1.0$8,200$8,200.0090-7097-01SPRITE CPSS PCI NIC CUSTOMER DOC R1.0$100$100.0090-7098-01SPRITE CPSS PCI NIC E1/T1 CS S/W UPGR1.0$400$400.0090-8268-01CPSS ATM PCI NIC$2,000$2,000.00SUN PACKAGES90-9694-01SUN SERVER PACKAGE # 1$51,064$51,063.9790-9695-01SUN SERVER PACKAGE # 2$78,526$78,525.7490-9696-01SUN SERVER PACKAGE # 3$98,424$98,424.2690-9697-01SUN WORKSTATION PACKAGE # 1$5,095$5,095.3890-9698-01SUN WORKSTATION PACKAGE # 2$21,708$21,707.8490-9699-01SUN WORKSTATION PACKAGE # 3$2,768$2,768.09PROFESSIONAL SERVICES90-7445-02OSS DEVELOPMENT CONSULTING - 1 YEAR$60,000$60,000.0090-7445-06OSS DEVELOPMENT CONSULTING - 6 MONTHS$45,000$45,000.0090-7445-07OSS DEVELOPMENT CONSULTING - 3 MONTHS$30,000$30,000.0090-9184-01Contracted daily engineering support on-site resource service for ATM Edge (8 AM - 5 PM, Monday - Friday). This part number covers the daily operating services of an on-site 3LS / 4LS resource. It is to be used anytime this resource is required to travel to a customer destination, where the installed base is currently covered by an existing Service Level Agreement (SLA). The following minimum unit purchase requirements exist : North America - 1 day, Central America, South America and EMEA - 2days, APAC -3 days.$1,500$1,500.007270MSC90-4442-01The 6 slot DC system is suitable for desktop or 19in and 23in r ackmount. It can be configured for redundant or non redundant co ntrol and fabric supporting 4 or 5 universal card slots respecti vely. Each system can support from 1 to 3 DC power supplies depe nding on system configuration and power supply redundancy requir ements. The system comes with a fan unit air filters and blank ing panels.3 This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$3,000$1,290.0090-4442-02The 8 slot DC system is suitable for desktop 19in rackmount o r 23in rackmount. It can be configured for redundant or non-redu ndant control and fabric supporting 7 or 8 universal card slots respectivel y. Each system can support from 1 to 5 DC power supp lies depending on system configuration and power supply redundan cy requirements. The system comes with a fan unit air filters and blanking panels. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$4,000$1,720.0090-4443-01A single 150 watt AC power supply that auto ranges to cover both 100/120 VAC and 220/240 VAC. The supply allows hot swapping and load sharing. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$500$215.0090-4444-01A single 150 watt 48/60 VDC power supply. The supply allows hot swapping and load sharing. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$700$301.0090-4445-01This unit is a replacement integrated fan unit for the 7270. It contains 6 fans integrated fan speed control and LED status p anel.$1,360$584.8090-4445-02This unit is a replacement integrated fan unit for the 8 slot 7270. It contains 6 fans, integrated fan speed control and LED status panel.$1,360$584.8090-4446-01This package contains 10 main and 10 power supply air filters.$300$129.0090-4446-02This package contains 10 main and 10 power supply air filters f or the 7270 8 slot systems.$300$129.0090-4447-01The unit is a replacement fan for both AC and DC power supply u nit.$100$43.0090-4448-01This unit is a replacement control I/o card. It provides ethern et and RS-232 ports for the control card(s).$320$137.6090-4449-01The spare Blank UCS Card Pair provides 1 blank front panel and 1 blank back panel for the 7270 system.$230$98.9090-4450-01This package provides spares for parts that are currently shipp ed with the 7270 shelves. It contains a power cord rubber feet PCMCIA card covers blank faceplates for BITs Alarm and Co ntrol i/o c ard and 19in and 23in mounting rails and screws.$230$98.9090-4451-01A 2.048 MHz reference clock input accepts redundant signals used to synchronize the switch to external clock sources. The card uses a BNC connector.$200$86.0090-4451-02A 2.048 MHz reference clock outputs redundant signals used to synchronize external equipment to the switch. The card uses a BNC connector.$200$86.0090-4451-03A 1.544 MHz reference clock input accepts redundant signals used to synchronize the switch to external clock sources. The card uses wire wrap pins. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$200$86.0090-4452-13This kit is used to upgrade a 7270 control card to the enhanced Processor Module(ePM) and larger (96M)SanDisk. Beginning in R5.0 7270control cards ship with the ePM installed, and with the larger SanDisk included, and do not require this upgrade kit. This kit contains an ePM(333 MHz PowerPC 755 module with 256M RAM), 96M SanDisk, part number labels and instructions for installation.$3,175$1,365.2590-4452-31The Control Card implements the control complex functions of the node, including call processing and PNNI. The Control Card provides two RS-232 ports for node management (local and/or remote NMTI), and one Ethernet 10BaseT interface port for network management system access. One card is required for non-redundant operation, and two for redundancy per 7270 system. This card must be installed in Control Card slots only. This card is delivered with R4.3 software. Each control card must be used in conjunction with a hub card (90-4453-03). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$6,000$2,580.0090-4452-42This Control Card implements the control complex functions of the node, including call processing and PNNI. The Control Card provides two RS-232 ports for node management (local and/or remote NMTI), and one Ethernet 10BaseT interface port for network management system access. One card is required for non-redundant operation, and two cards for redundancy per 7270 system. This card must be installed in Control Card slots only. This card is delivered with R5.0 software and with an enhanced Processor Module (ePM). Each control card must be used in conjunction with a hub card (90-4453-03). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$8,000$3,440.0090-4452-49This Control Card implements the control complex functions of the node, including call processing, PNNI, and data spooling. The Control Card provides two RS-232 ports for node management (local and/or remote NMTI), and one Ethernet 10BaseT interface port for network management system access. One card is required for non-redundant operation, and two cards for redundancy per 7270 system. This card must be installed in Control Card slots only. This card is delivered with R5.0 software and with an enhanced Processor Module (ePM). Each control card must be used in conjunction with a hub card (90-4453-03).$10,000$4,300.0090-4452-52This Control Card implements the control complex functions of the node,including call processing and PNNI. The Control Card provides two RS-232 ports for node management (local and/or remote NMTI), and one Ethernet 10BaseT interface port for network management system access. One card is required for non-redundant operation,and two cards for redundancy per 7270 system. This card must be installed in Control Card slots only. This card is delivered with R6.0 software and with an enhanced Processor Module (ePM).Each control card must be used in conjunction with a hub card.$8,000$3,440.0090-4452-52This Control Card implements the control complex functions of the node,including call processing and PNNI. The Control Card provides two RS-232 ports for node management (local and/or remote NMTI), and one Ethernet 10BaseT interface port for network management system access. One card is required for non-redundant operation,and two cards for redundancy per 7270 system. This card must be installed in Control Card slots only. This card is delivered with R6.0 software and with an enhanced Processor Module (ePM).Each control card must be used in conjunction with a hub card.$8,000$3,440.0090-4452-59This Control Card implements the control complex functions of the node,including call processing, PNNI, and data spooling. The Control Card provides two RS-232 ports for node management (local and/or remote NMTI),and one Ethernet 10BaseT interface port for network management system access. One card is required for non-redundant operation, and two cards for redundancy per 7270 system. This card must be installed in Control Card slots only. This card is delivered with R6.0 software and with an enhanced Processor Module (ePM). Each control card must be used in conjunction with a hub card.$10,000$4,300.0090-4452-59This Control Card implements the control complex functions of the node,including call processing, PNNI, and data spooling. The Control Card provides two RS-232 ports for node management (local and/or remote NMTI),and one Ethernet 10BaseT interface port for network management system access. One card is required for non-redundant operation, and two cards for redundancy per 7270 system. This card must be installed in Control Card slots only. This card is delivered with R6.0 software and with an enhanced Processor Module (ePM). Each control card must be used in conjunction with a hub card.$10,000$4,300.0090-4453-03The 7270 Hub card is the common equipment card that provides lo cal switching capability. The Hub handles 800M transmit and rece ive non blocking switching. For a non-redundant fabric one Hub card is required. For a redundant fabric two Hub cards are re quired. This version of HUB card can be used interchangeably in both 6 and 8 slot systems. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$2,500$1,075.0090-4454-11The T1 4 port Channelized Frame Relay card provides 4 DS1 ports. Each port is channelized down to the DS0 rate. Supports up to 2000 frame relay connections per card. Perform frame relay to ATM Network Interworking and Service Interworking. This card is delivered with R4.2 software.$7,000$3,010.0090-4454-12The E1 4 port Channelized Frame Relay card provides 4 E1 ports. Each port is channelized down to 64kb/sec rate. Supports up to 2000 frame relay connections per card. Perform frame relay to ATM Network Interworking and Service Interworking. This card is delivered with R4.2 software.$7,000$3,010.0090-4455-21The 8 Port T1 Circuit Emulation Card multiplexes/demultiplexes the circuits carried over a TDM channelized link and performs the necessary operations to allow the transport of these circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM Forum. It also provides CAS pass-through or clear channel capability. This card is delivered with R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$7,000$3,010.0090-4455-22The 8 Port E1 Circuit Emulation Card multiplexes/demultiplexes the circuits carried over a TDM channelized link and performs the necessary operations to allow the transport of these circuits through an ATM network. This card supports both structured and unstructued service as defined by the ATM Forum. It optionally provides CAS pass-through or clear channel capability. This card is delivered with R4.3 software.$7,000$3,010.0090-4456-02The OC3-2M UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The OC3-2M is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This OC3 card provides 16K connections per port. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4462-xx). This card is shipped with R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$9,800$4,214.0090-4456-12The OC3-2M UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The OC3-2M is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This OC3 card provides 16K connections per port. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4462-xx). This card is shipped with R5.0 software.$9,800$4,214.0090-4456-22The OC3-2M UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The OC3-2M is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This OC3 card provides 16K connections per port. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01)which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4462-xx). This card is shipped with R6.0 software.$9,800$4,214.0090-4457-02The STM1-2M UNI/NNI Card with CPU-2 is an ATM interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The STM1-2M is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This STM1 card provides 16K connections per port. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4462-xx). This card is shipped with R4.3 software.$9,800$4,214.0090-4457-12The STM1-2M UNI/NNI Card with CPU-2 is an ATM interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The STM1-2M is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This STM1 card provides 16K connections per port. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4462-xx). This card is shipped with R5.0 software.$9,800$4,214.0090-4457-22The STM1-2M UNI/NNI Card with CPU-2 is an ATM interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The STM1-2M is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This STM1 card provides 16K connections per port. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM,90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01)which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4462-xx). This card is shipped with R6.0 software.$9,800$4,214.0090-4458-13The DS3 UNI/NNI card is a three port ATM interface card. Each port operates at 45Mbps. The DS3 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4463-xx). This card is shipped with R4.3 software.$11,500$4,945.0090-4458-14The E3 UNI/NNI card is a three port ATM interface card. Each port operates at 34Mbps. The E3 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4463-xx). This card is shipped with R4.3 software.$11,500$4,945.0090-4458-15The DS3 UNI/NNI card is a three port ATM interface card. Each port operates at 45Mbps. The DS3 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This DS3 card provides 4.5K connections per port. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4463-xx). This card is shipped with R5.0 software.$11,500$4,945.0090-4458-16The E3 UNI/NNI card is a three port ATM interface card. Each port operates at 34Mbps. The E3 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This E3 card provides 4.5K connections per port. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4463-xx). This card is shipped with R5.0 software.$11,500$4,945.0090-4458-25The DS3 UNI/NNI card is a three port ATM interface card. Each port operates at 45Mbps. The DS3 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1) and the ATM Forum B-ICI Specification (Version2.0). This DS3 card provides 4.5K connections per port. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM,90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01)which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4463-xx). This card is shipped with R6.0 software.$11,500$4,945.0090-4458-26The E3 UNI/NNI card is a three port ATM interface card. Each port operates at 34Mbps. The E3 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1) and the ATM Forum B-ICI Specification (Version2.0). This E3 card provides 4.5K connections per port. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM,90-6744-02) or enhanced Traffic Shaping Module (eTM, 90-7695-01)which, when installed, provides enhanced traffic management features. This card must be used in conjunction with an I/O module (90-4463-xx). This card is shipped with R6.0 software.$11,500$4,945.0090-4459-23This card provides eight T1 ports for Cell Relay (ATM) services on the 7270, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-6743-01) to provide up to four groups of ATM Inverse Multiplexing. This card must be used in conjunction with an I/O module (90-4460-01). This card is shipped with R4.3 software.$9,750$4,192.5090-4459-24This card provides eight E1 ports for Cell Relay (ATM) services on the 7270, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-6743-01) to provide up to four groups of ATM Inverse Multiplexing. This card must be used in conjunction with an I/O module (90-4460-02 or 90-4460-03). This card is shipped with R4.3 software.$9,750$4,192.5090-4459-33This card provides eight T1 ports for Cell Relay (ATM) services on the 7270, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-6743-01) to provide up to four groups of ATM Inverse Multiplexing. This card must be used in conjunction with an I/O module (90-4460-01). This card is shipped with R5.0 software.$9,750$4,192.5090-4459-34This card provides eight E1 ports for Cell Relay (ATM) services on the 7270, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-6743-01) to provide up to four groups of ATM Inverse Multiplexing. This card must be used in conjunction with an I/O module (90-4460-02 or 90-4460-03). This card is shipped with R5.0 software.$9,750$4,192.5090-4459-43This card provides eight T1 ports for Cell Relay (ATM) services on the 7270,with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-6743-01)to provide up to four groups of ATM Inverse Multiplexing. This card must be used in conjunction with an I/O module (90-4460-01). This card is shipped with R6.0 software.$9,750$4,192.5090-4459-44This card provides eight E1 ports for Cell Relay (ATM) services on the 7270,with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-6743-01)to provide up to four groups of ATM Inverse Multiplexing. This card must be used in conjunction with an I/O module (90-4460-02 or 90-4460-03).This card is shipped with R6.0 software.$9,750$4,192.5090-4460-01The T1 I/O card provides 8 ports that may be software-configured as an off-premise (DS-1) or on-premise (DSX-1) interface using RJ45 connectors. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$1,200$516.0090-4460-02The E1 I/O card provides 8 ports of 120 ohm twisted pair interface, using RJ45 connectors.$1,000$430.0090-4460-03The E1 I/O card provides 8 ports of 75 ohm coaxial cable interface, using BNC connectors.$1,100$473.0090-4461-01The T1 I/O card provides 4 ports that may be software-configured as an off-premise (DS-1) or on-premise (DSX-1) interface using RJ45 connectors. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$600$258.0090-4461-02The E1 I/O card provides 4 ports of 120 ohm twisted pair interface, using RJ45 connectors.$600$258.0090-4461-03The E1 I/O card provides 4 ports of 75 ohm coaxial cable interface, using BNC connectors.$600$258.0090-4462-01The OC3/STM1 Short Reach I/O card provides the multimode fiber interface using SC connectors. The interface has a typical range of 2km. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$750$322.5090-4462-02The OC3/STM1 Intermediate Reach I/O card provides single mode fiber interface using SC connectors. The interface uses 1310nm laser and has a total loss budget of 12dB. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$1,830$786.9090-4462-03The OC3/STM1 Long Reach I/O card provides single mode fiber interface using SC connectors. The interface uses 1310nm laser and has a total loss budget of 28dB. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$2,300$989.0090-4462-06The OC3/STM1 CMI BNC I/O card provides coaxial cable interface using a BNC connector.$1,210$520.3090-4463-01The DS3/E3 3 Port BNC I/O card provides coaxial cable interface using a BNC connector. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$700$301.0090-4463-04The DS3/E3 single port BNC I/O card provides co-axial cable interface using a BNC connector. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$500$215.0090-4464-01This unit provides separate dry contact relay outputs for critical, major, minor, audible and visible alarms. It also provides 6 independant external alarm sensor inputs. In the DC system also monitors for the 48/60 VDC A and B feeds. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$200$86.0090-4521-43Technical Practices for R4.3 of the 7270$325$139.7590-4521-50Technical Practices for R5.0 of the 7270$325$139.7590-4521-60Technical Practices for R6.0 of the 7270$325$139.7590-4521-60Technical Practices for R6.0 of the 7270$325$139.7590-4653-01The Voiceband Services Card (VSC) terminates TDM channels at its T1 ports, and provides features including speech compression, silence removal, and fax demodulation to adapt these TDM channels to transport over an ATM network. The VSC requires a minimum of one (typical applications require three) and a maximum of four DSP1 transport modules per 90-4654-02. Fits 7270 midplane. Requires I/O card per 90-4461-01$7,500$3,225.0090-4653-02The Voiceband Services Card (VSC) terminates TDM channels at its E1 ports, and provides features including speech compression, silence removal, and fax demodulation to adapt these TDM channels to transport over an ATM network. The VSC requires a minimum of one (typical applications require three) and a maximum of four DSP1 transport modules per 90-4654-02. Fits 7270. Requires I/O card per 90-4461-02, -03, or 04.$7,500$3,225.0090-4654-02VSC DSP1 Transport Module: Supports up to 40 voice channels, i.e. 40 channels of either G.729A (CS ACELP), G.711 (PCM), G.726 (ADPCM), NetCoder, or clear channel. Provides silence suppression, idle channel detection, and integrated echo cancellation of up to 30 ms tail length per channel. Note: At least one VSC DSP1 module must be installed on every Voiceband Service Card 90-4653-xx 90-6757-xx See also: 90-4654-01 This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$6,500$2,795.0090-6499-01The Stratum 3 SSU Module provides a BITS input clock to the 727 0 system. The Stratum 3 SSU is an optional module for the Contro l Card (90-4452-0x). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$800$344.0090-6502-01V.28 SUBD26M-DB25M DCE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$100$43.0090-6502-02V.28 SUBD26M-DB25M DTE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$100$43.0090-6502-03V.28 SUBD26M-DB25F DTE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$100$43.0090-6502-04V.28 SUBD26M-DB25F DCE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$100$43.0090-6602-21The 10/100 Mbits/sec Ethernet LAN adaptation card provides tranparent bridging of Ethernet/IEEE 802.3 LAN traffic over ATM. R4.3 includes several OAM enhancements to the card. This card is delivered with R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$5,000$2,150.0090-6602-31The 10/100 Mbits/sec Ethernet LAN adaptation card provides tranparent bridging of Ethernet/IEEE 802.3 LAN traffic over ATM. Each port supports up to 64 IEEE 802.1Q VLANs. This card is delivered with R5.0 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$5,000$2,150.0090-6603-01The twisted pair 10/100 Mbits/sec Ethernet I/O card provides four 100BaseT ports. This I/O card is used with the 10/100 Mbs Ethernet card (90-6602-01) card. When used, both 10 Mbs twisted pair and 100 Mbs twisted pair interfaces are supported, with autonegotiation of the bit rate. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$2,100$903.0090-6743-01This module provides inverse multiplexing for ATM (IMA) capabil ity for the T1/E1 ATM Cell Relay interface cards (90-4459-0x) fo r the 7270. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$3,000$1,290.0090-6744-02The 7270 Multi-Service Traffic Shaping Module (MTSM) is an opti onal module for the 7270 OC3 STM-1 DS3 and E3 Cell Relay c ards. When installed it provides an additional 200K cells of b uffering per- VC queuing per VC-shaping ABR Virtual-Source /Virtual Destination and other traffic management enhancements .$7,000$3,010.0090-6827-11The DS3 CE card provides the termination of a single DS3 circuit emulation interface channelized down to DS1.$15,000$6,450.0090-6828-11This card provides High Speed Frame Relay processing. Provides ATM to FR Service Interworking and Network Interworking. Can also operate in HDLC frame forwarding mode for transparent transport of HDLC-based protocols such as X.25, SNA and PPP across the ATM network. Supports Test Access Connection (TAC) for VBR and Closed Loop Congestion Control. This card is delivered with R4.3 software.$12,000$5,160.0090-6888-01The programmable serial interface (PSI) I/O card provides 16 ports configurable as V.35, X.21 or V.28/RS-232 physical interfaces. The physical interface is a 26-pin SCSI D-shell, so appropriate adapter cables must be used for V.28, V.35 or X.21. Ref 90-6502-01..-04, 90-7004-01..-04, 90-7005-01..-04$5,000$2,150.0090-6893-01This CD is a 7270 MSC Technical Practices Library that includes information for all currently available 7270 MSC releases.$350$150.5090-6894-43Software CD-ROM for 7270 R4.3 containing Hardened Loadset #1. This is the software license meaning one CD is required for each control card that needs to be upgraded.$2,500$1,075.0090-6894-50Software CD-ROM for 7270 R5.0 containing Hardened Loadset #1. This is the software license meaning one CD is required for each control card that needs to be upgraded.$2,500$1,075.0090-6894-60Software CD-ROM for 7270 R6.0 containing Hardened Loadset #1. This is the software license meaning one CD is required for each control card that needs to be upgraded.$2,500$1,075.0090-7004-01X.21 SUBD26M-DB15M DCE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$100$43.0090-7004-02X.21 SUBD26M-DB15M DTE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$100$43.0090-7004-03X.21 SUBD26M-DB15F DTE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$100$43.0090-7004-04X.21 SUBD26M-DB15F DCE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$100$43.0090-7005-01V.35 SUB26M-M34M DCE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$140$60.2090-7005-02V.35 SUBD26M-M34M DTE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$140$60.2090-7005-03V.35 SUBD26M-M34F DTE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$140$60.2090-7005-04V.35 SUBD26M-M34F DCE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.$140$60.2090-7104-02The multi-fiber (MMF) 100 Mbits/sec Ethernet I/O card provides four 100 Base-FX ports. This I/O card is used with the 10/100Mbs Ethernet (90-6602-01) card. When used, only 100 Mbs multi-mode fiber interfaces are supported.$4,200$1,806.0090-7104-04The single-mode fiber (SMF) 100 Mbits/sec Ethernet I/O card provides four 100 Base-FX ports. This I/O card is used with the 10/100Mbs Ethernet (90-6602-01) card. When used, only 100 Mbs single-mode fiber interfaces are supported.$7,900$3,397.0090-7285-01The 8-Port CE Echo Cancellation Module is an extension module for the 7470/7270/7670ESE 120 ohm 8-port T1/E1 CE Cards. The echo cancellation module monitors ingress and egress speech in order to compute an estimate of the undesired echo that may be present. This estimate is then used to cancel echoes which accumulate due to hybrids and other effects in the voice network. This module provides up to 63 milliseconds of tail length. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$10,000$4,300.0090-7285-02The 8-port CE Echo Cancellation Module is an extension module for the 120 ohm 7470/7270/7670ESE 8-port T1/E1 CE Cards. The echo cancellation module monitors ingress and egress speech in order to compute an estimate of the undesired echo that may be present. This estimate is then used to cancel echoes which accumulate due to hybrids and other effects in the voice network. This module provides up to 127 milliseconds of tail length in one way mode or up to 63 milliseconds of tail length in two way mode. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$15,300$6,579.0090-7694-01This package provides spares for parts that are currently shipp ed with the 7270 shelves. It contains a power cord rubber feet PCMCIA card covers blank faceplates for BITs Alarm and Control I/O card and 19in and 23in mounting rails and screws.$300$129.0090-8304-01This optional module for the Control Card (90-4452-xx) provides system timing which can be derived from any line interface or BITS input (90-4451-01/03/04). This module has a wider capture range (+/- 50ppm) than the Stratum 3 SSU. Note, however, that this is not a Stratum 3 clock source. Stratum 3 timing requires part no. 90-6499-01. This part satisfies the Australian regulatory requirement for CPE devices as stated in TS016.$800$344.0090-7695-01The Enhanced Traffic Management (ETM) module is an optional module for the DS3-2, E3-2, OC3-2,STM1-2, OC3-2M and STM1-2M cell relay line cards. It provides the Traffic Management features of the Titan ASIC, including increased cell buffer size (1M cells), Weighted Fair per-VC Queuing (WFQ) for all service categories, ingress and egress per-VC shaping, VP Aggregation and ABR VS/VD and ER marking, in addition to the features and functionality provided by the MTSM module. Requires a minimum of R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$13,500$5,805.0090-8977-02This kit is used to upgrade a 7470 Release 4.3-5.0 Integrated CallP or Integrated CallP/PNNI card, or 7270 Release 5.0 control card to an Integrated CallP/PNNI/Spooling card in Release 5.0. Also it is to be used to upgrade a R2.0 7670 ESE ECC (90-8396-01) to support integrated data spooling.Factory shipments of R5.0 Integrated CallP/PNNI/Spooling cards ship with the SRAM included and do not require this upgrade kit. The kit contains a 6M SRAM card, part number labels and instructions for installation. Note for the 7470 that if the card to be upgraded does not use the ePM and larger (256M) SanDisk, then the Integrated CallP or Integrated CallP/PNNI Upgrade to Integrated CallP/PNNI/Data Spooling Kit(90-8977-01) should be used instead. Note for the 7270 that if the card to be upgraded does not use the ePM and larger (96M) SanDisk, then both the 7270 control card upgrade kit (90-4452-13) and this upgrade kit are required..$2,500$1,075.00363090-0567-01One per T-1 circuit required for operation with external CSU or for systems requiring a DSX-1 electrical interface; provides enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$350$175.0090-0568-01One per E-1 circuit required to interface to G.703 75 ohm asymmetrical; includes enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$490$245.0090-0568-02Variant of the E1 LIM (90-0568-01) which only supports 120 ohm interface. All other features of the E1 LIM are supported.$490$245.0090-0411-57Desktop, wall-mount, 19 rack-mount system. Does not require 36SM SHELF ASSY (90-1313-02). Provides two E-1(2.048 Mb/s) links. Includes internal power supply (100-240VAC) with integral ringing generator (factory set to 25Hz, user configurable to 20Hz), common control, Universal card, display assembly and software 91X5. Optional slide assembly (90-9084-01), optional wall mount bracket (90-0338-04), and customer documentation (90-0433-03) to be ordered separately.$4,990$2,495.0090-0411-58Desktop, wallmountable, 19 rackmountable system. Does not require 36SM SHELF ASSY (90-1313-02). Provides two E-1 (2.048 Mb/s) links. Includes internal 48VDC power supply with integral 25Hz ringing generator, common control, Universal card, display assembly and software 91X5. Optional slide drawer (90-9084-01), optional wall mount bracket (90-0338-04), and customer documentation (90-0433-03) to be ordered separately$4,990$2,495.0090-0411-67This is the 3630 19 rack-mount system complete with sliders attached for easy installation. Does not require 36SM SHELF ASSY (90-1313-02). Provides two E-1(2.048 Mb/s) links. Includes internal power supply(100-240VAC) with integral ringing generator (factory set to 25Hz, user configurable to 20Hz), common control,Universal card, display assembly and software 91X5.$5,350$2,675.0090-0411-68This is the 3630 19 rack-mount system complete with sliders attached for easy installation. Does not require 36SM SHELF ASSY (90-1313-02). Provides two E-1 (2.048 Mb/s) links. Includes internal 48VDC power supply with integral 25Hz ringing generator, common control, Universal card, display assembly and software 91X5.$5,350$2,675.0090-0412-52Desktop, wall-mount, 19 rack-mount system. Does not require 36SM SHELF ASSY (90-1313-02). Provides two T-1(1.544 Mb/s) links. Includes internal power supply (100-240VAC) with integral ringing generator (factory configured to 20Hz, user configurable to 25Hz), common control, Universal card, display assembly and software 91X5. Optional slide assembly (90-9084-01), optional wall mount bracket (90-0338-04), and customer documentation (90-0433-03) to be ordered separately.$4,990$2,495.0090-0412-58Desktop, wallmountable, 19 rackmountable system. Does not require 36SM SHELF ASSY (90-1313-02). Provides two T-1 (1.544 Mb/s) links. Includes internal 48VDC power supply with integral 20Hz ringing generator 20Hz, common control, Universal card, display assembly and software 91X5. Optional slide drawer (90-9084-01), optional wall mount bracket (90-0338-04),and customer documentation (90-0433-03) to be ordered separately$4,990$2,495.0090-0412-62This is the 3630 19 rack-mount system complete with sliders attached for easy installation.Does not require 36SM SHELF ASSY (90-1313-02). Provides two T-1(1.544 Mb/s) links. Includes internal power supply(100-240VAC) with integral ringing generator (factory configured to 20Hz,user configurable to 25Hz), common control, Universal card, display assembly and software 91X5.$5,350$2,675.0090-0412-68This is the 3630 19 rack-mount system complete with sliders attached for easy installation. Does not require 36SM SHELF ASSY (90-1313-02). Provides two T-1 (1.544 Mb/s) links. Includes internal 48VDC power supply with integral 20Hz ringing generator 20Hz, common control, Universal card,display assembly and software 91X5.$5,350$2,675.0090-0433-03A set of manuals for the 3630 at Release 5. Includes Installation, Configuration, Maintenance manuals as well as a Quick Reference Guide. Manuals are assembled in a binder.$150$75.0090-0433-04A set of manuals for the 3630 at Release 5.3. Includes Installation, Configuration, Maintenance manuals as well as a Quick Reference Guide. Manuals are assembled in a binder.$150$75.0090-0562-07System software for 3630 T1 and E1 systems. Includes a frotn panel label (new alarm LED designators) required when upgrading from Release 2, 3, 4, or existing release 5.$200$100.0090-0627-10Manual Ringdown A-LAW Module with 600 Ohm resistive impedance. Tailored for Gen/Gen use only.$400$200.0090-2257-03Base distribution panel for use with 3630 systems. It will allow installation of up to eight 36SM personality modules. Includes an extended cover (90-2303-01) which allows for installation of the V.35/M34 personality module (90-2258-04). (90-234X-XX) cables hat connect the Basic System to the Universal Distribution Panel are sold separately. Requires 36SM Distribution Panel rackmount bracket for rackmount installation (90-2254-01).$643$321.5090-4900-05Basic system that provides to a single E1 (2.048Mb/s) high speed optical link interface when installed with 90-0568-08 optical LIM module. (must be ordered separately). Also included is a secondary E1 PRI interface that must configured with a standard LIM or HDSL LIMS. (LIMS must be ordered separately) Includes 240VAC power supply (90-0417-01), common control card (90-4901-01). software generic 91x5 (90-0562-07), universal card (90-0413-01), and display assembly. System documentat ion (90-0433-03) and ringing generators (90-0578-01) (qty 2 per system) also must be order separately.$4,990$2,495.0090-0156-02Single FXS(LGS) module for end-to-end or corporate network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of 0 to -7DB; module operates as FXS or PLAR circuit.$350$175.0090-0156-05Single FXS (LGS) module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of 0 to -7DB; module provides line reversal capability.$350$175.0090-0156-06Single FXS (LGS) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10DB for receive and +4 to -3DB for transmit. Module operates as FXS or PLAR circuit. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$350$175.0090-0156-07Single FXS (LGS) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10DB for receive and +4 to -3DB for transmit; this module provides line reversal capability and increased loop performance. Module operates as FXS, PLAR or DPO circuits. Recommended for all new installations.$400$200.0090-0156-08Single FXS module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10DB for receive and +4 to -3DB for transmit; this module provides line reversal capability and increased loop performance. Module operates as FXS, PLAR or DPO circuits. Module offers complex impedance of 600 +2.15 microfarad and supports on-hook calling line ID. Recommened for new installations. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$400$200.0090-0157-01Single E&M module for end-to-end or corporate network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of +4.0 to -3.5DB. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB, module employs Type 1 or Type 2 signalling.$350$175.0090-0157-02Single E& M module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of +4.0 to -3.5 DB. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB, module employs Type 1 or Type 2 signalling. (Type 2 signalling is supported by a special wiring configuration that requires separate external 48VDC source).$350$175.0090-0157-03Single E&M module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10.5DB for receive and +4 to -3.5DB for transmit. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB. Module employs Type 1 or Type 2 signalling. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$350$175.0090-0157-04Single E& M module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of +3.5DB to -3.5DB; module employs Type 5 signalling.$350$175.0090-0160-01One per system required for DDS DS0A rate adaption of data channels connected over 275x MainStreet Data Termination Units; OCU modules (90-0693-01) do not require this module; module also generates ringback tone for Megacom800 applications; module is mutually exclusive with the Tone module (90-0512-01 and 90-0512-02) and any DSP module.$700$350.0090-0161-02Required for compliance to PUB-62411. Required to connect direct to T-1 lines from carrier; powered from system only; no wetting current; includes circuitry for bypass switching; does not include circuitry for redundancy switching. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$1,200$600.0090-0338-04A pair of brackets that will allow a 3612, 3624,or 3630 system (90-0575-68, 90-0411-57,90-0411-58, 90-0412-52,90-0412-58, 90-2002-04, and 90-2003-03) to be wall mounted.$500$250.0090-0425-01Single FXS (LGS) module for general applications interfacing to voice terminal equipment certified to connect to public networks in the United Kingdom; module provides line reversal and third-wire capability; does not apply to 3624 MainStreet. Offers TLP's of +1/-6 for receive and +4/-3 for transmit.$350$175.0090-0432-01Supports both DTE and DCE operation. Supports both HCM and Transparent rate adaption. Two control leads supported: C/I. Supports NX56/64 super-rate operation. ***This module cannot be used as a source for system synchronization.***$750$375.0090-0466-01One per 3612 or 3630 required, if 48V signalling is required with LGS interfaces, or Vbat feed for E&M type 2 interfaces.$250$125.0090-0512-01One per system required for Megacom800 and PLAR applications, where the CPE does not send ringback tone to the network; module is mutually exclusive with DDS Module (90-0160-01 or 90-0160-02) or any of the DSP modules. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$400$200.0090-0523-01Single V.35 module providing for a single V.35 compatible interface (DTE or DCE) per module. Three control leads are supported; DCD/RTS/ALB when configured as DCE. These modules cannot be used to derive a clock for system synchronization. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$750$375.0090-0526-01Single FXO (LGE) module for end-to-end or corporate network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of 0 to -7 DB; module operates as FXO or DPT circuits.$400$200.0090-0526-02Single FXO (LGE) module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of 0 to -7 DB.$400$200.0090-0526-03Single FXO (LGE) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10 DB for receive and +3 to -4 DB for transmit; module operates as FXO or DPT circuits. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$400$200.0090-0530-11Contains DB25 to RJ45 cable adaptors, RJ45 cables, anti-static strap, miscellaneous tools and mounting hardware required to install one 2902, 3612, 3620, 3624, or 3630 wall mount system.$415$207.5090-0555-16Straight through male to female ampchamp cable with 180 deg. headshell.$37$18.5090-0611-01Single RS232 module providing for dual RS-232/V.24 interfaces per module. Most common synchronous and asynchronous speeds are supported up to 64KBPS. Both HCM and transparent framing formats are supported. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$500$250.0090-0627-01Single manual ringdown module for end-to-end network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of 0 to -15DB; module operates as end station interface using manually controlled ringing.$400$200.0090-1043-01G.703 Co-directional DCM's. Two interfaces provided without signalling, one interface with ABCD signalling (software selectable). Either interface can provide system sync.$900$450.0090-1374-01This module is used to fill in module slot positions whose bandwidth is used for superrate operations, to prevent other modules from being plugged in. Package of 3.$50$25.0090-1579-01Module required to support X.21 & V.35 DCM speeds above 64 kb/s (n * 64K). For E1 3630's this module is required to support one or more super-rate ports. For T1 3630's the module is only required where more than one super-rate port is needed. This module is mutually exclusive with any other 36SMCP module (including Tone, DSP and VCB modules). For both E1 and T1 systems this module is required for 4602/46020 GUI support.$300$150.0090-1585-01Digital voice conference bridge module with a maximum capacity of eight bridges. The eight bridges are partitioned into two groups of four, each group has a pool of 12 inputs which can be allocated as desired across the four bridges. This module is installed in the DSP slot of the 3630 and is mutually exclusive with Tone or DDS modules (90-0512-01, 90-0160-01).$400$200.0090-2254-01Mounting bracket used for mounting two 3620 Distribution Panels (90-2255-01) or two 3612/24 Base Distribution Panels (90-2256-01) or one 3630 Base Distribution Panel (90-2257-01) into a 19 rackmount c onfiguration. Personality modules and Base Distribution Panels ordered separately.$100$50.0090-2258-01Dual port DB25, V.24 DCE adaptor module for use with the 36SM Base Distribution Panel (90-2256-03 or 90-2257-03).$80$40.0090-2258-02Single port DB15 X.21 DCE adaptor module for use with the 36SM Base Distribution Panel (90-2256-03 or 90-2257-03).$80$40.0090-2258-03Single port DB25, V.35 DCE adaptor module for use with the 36SM Base Distribution Panel (90-2256-03 or 90-2257-03).$80$40.0090-2258-04Single port M34, V.35 DCE adaptor module for use with the 36SM Base Distribution Panel (90-2256-03 or 90-2257-03).$132$66.0090-2258-05Four port voice distribution module which provides pass through connection from input to output AmpChamp connectors. For use with the 36SM Base Distribution Panel (90-2256-03 or 90-2257-03). Passes termination to the auxiliary connection for use with an external punchdown block. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$73$36.5090-2258-09Voice Direct Adaptor Module for use with the 36SM Base Distribution Panel (90-2256-03, 90-2257-03). Used with the tributary T1, OCU, 4WTO, 2WTO, LGS, LGE, MRD and E&M Modules.$80$40.0090-2341-01Non shielded 1.5 meter in length small mux panel cable for connecting to small mux distribution panels (90-2255/6/7-01).$40$20.0090-2341-02Identical to 90-2341-01, but 3 meters in length.$45$22.5090-2341-03Identical to 90-2341-01, but 6 meters in length.$65$32.5090-2341-04Non shielded, 180 deg. headshell, 1.5 meter in length small mux panel cable for connecting to small mux distribution panels (90-2255/6/7-03).$40$20.0090-2341-05Non shielded, 180 deg. headshell, 3 meter in length small mux panel cable for connecting to small mux distribution panels (90-2255/6/7-03).$45$22.5090-2342-01Shielded 1.5 meter in length small mux panel cable for connecting to small mux distribution panels (90-2255/6/7-01).$151$75.5090-2342-02Identical to 90-2342-01, but 3 meters in length.$221$110.5090-2892-01Single 2B1Q Module connecting any of the following data termination units: 2751 RS-232/V.24 DTU, 2752 X.21 DTU, and 2753 V.35 DTU providing the node S/W supports the DTU.$750$375.0090-3152-01An adaptor which physically converts dual BNC to RJ45. Conversion is physical only, no impedance adaptation. The BNC connections are male, the RJ45 connection is female.$158$79.0090-9084-01The drawer slide assembly is intended for use witthe 3612, 3624, and 3630 rack mount systems(90-0575-68, 90-0411-57, 90-0411-58, 90-0412-52,90-0412-58, 90-2002-04, and 90-2003-03). This slide assembly allows access to a system by pulling the chassis outward from an equipment rack.$550$275.007470MSP90-2180-01The Termination Card is used to terminate the high speed signals on the backplane of the Switching Shelf Cardfile. One Termination Card is required per Switching Shelf Cardfile and is mandatory for proper operation. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$2,070$1,035.0090-2181-01The Switching Shelf Cardfile is a 19 rackmount shelf which is composed of 8 Dual Switching Card slots, 8 Dual Receiver Card slots, and one Termination Card slot. The minimum configuration is one Termination, one Dual Receiver, and one Dual Switching Card. The Dual Receiver and Dual Switching Card slots are associated and always go in pairs. The shelf is scalable from one Dual Receiver/Switching Card to 8 Dual Receiver/Switching Cards in increments of one. One Switching Shelf Cardfile implements a complete 36170 ATM switching matrix (12.8 Gbps): if fabric redundancy is required a second Switching Shelf Cardfile is required. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$3,000$1,500.0090-2183-02The Dual Receiver Card can terminate the received interface of up to two 800 Mbps ISL links. One to eight Dual Receiver Cards can be installed in the Switching Shelf Cardfile for a total throughput of 12.8Gbps. This card is identical to the 90-2183-01 except with 1310 Nm optics. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$3,250$1,625.0090-2183-04The Extended ISL (X-ISL) Dual Receiver Card can terminate the receive interface of two 800 Mbps X-ISL links. One to eight Dual Reciever Cards can be installed in the switching shelf for a total throughput of 12.8 Gps. X-ISL reach is 15km over customer supplied Single Mode Fiber. SMF cable requirements are 9/125 micron core/cladding, 0.35 dB/Km attenuation at 1310nm, flat polish SC/SC connector.$5,240$2,620.0090-2289-01This package includes seven (7) Filler Plate Cards for the PBX slots of the Switching Shelf. The Switching Shelf has a total of eight (8) DRX card slots.$975$487.5090-2290-03The Dual Fabric Interface Card (FIC) for the OC12-2 provides interconnection of high speed interface cards installed in a High Speed Peripheral Shelf (HSPS) to a 7470 Switching Shelf through standard 1310 Nm Inter-shelf Links (ISLs). Each FIC terminates up to two ISLs and is used to interface to one of the redundant switching fabrics. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$12,000$6,000.0090-2291-01Cardfile designed for 19 rack. It is used for high speed interface cards and Dual Fabric Interface Cards (FIC). Each High Speed Peripheral Shelf is functionally divided into four sub-units, each comprised of two full height interface card slots and two 1/2 height FIC slots. Each sub-unit can support the two interface slots as either independent cards or as a redundant pair, with redundant fabric operation in both cases. Each FIC terminates up to two ISLs and is used to interface to one of the redundant switching fabrics. Two FICs must be installed in each independent sub-unit of the HSPS to provide fabric redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$5,400$2,700.0090-2293-01This package includes six (6) Filler Plate Cards for the UCS slots of the Peripheral Shelf. The Peripheral Shelf has a total of twelve (12) UCS Card slots.$975$487.5090-2295-01The Control Card I/O Panel provides connectorization for both the active and standby Control Cards. The interfaces provided are: Ethernet, 10BaseT, RS-232, and BITS clock inputs. (Wire wrap posts 1.544 meg). 1VU brackets for mid-mounting shipped with this assembly for mid-mounting. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$1,300$650.0090-2295-02The Control Card I/O Panel provides connectorization for both the active and standby Control Cards. The interfaces provided are: Ethernet 10BaseT, RS-232, and External clock inputs/outputs via BNC co nnectors (2meg).$1,350$675.0090-2296-03This part contains the Up and Down ISL cabling required to interconnect a Dual Peripheral Shelf to the Switching Shelf, or one subunit of a High Speed Peripheral Shelf to the Switching Shelf. This part number is a multi-mode 3 meter duplex fiber cable with staggered ends. The part includes two dual ISLs, where each dual ISL consists of two bundled 800 Mb/s strands that together create an Up or Down ISL at 1.6 Gb/s.$500$250.0090-2296-04This part contains the Up and Down ISL cabling required to interconnect a Dual Peripheral Shelf to the Switching Shelf, or one subunit of a High Speed Peripheral Shelf to the Switching Shelf. This part number is a multi-mode 10 meter duplex fiber cable with staggered ends. The part includes two dual ISLs, where each dual ISL consists of two bundled 800 Mb/s strands that together create an Up or Down ISL at 1.6 Gb/s.$600$300.0090-2296-05This part contains the Up and Down ISL cabling required to interconnect a Dual Peripheral Shelf to the Switching Shelf, or one subunit of a High Speed Peripheral Shelf to the Switching Shelf. This part number is a multi-mode 6 meter single fiber cable with staggered ends. The part includes two dual ISLs, where each dual ISL consists of two bundle 800 Mb/s strands that together create an Up or Down ISL at 1.6 Gb/s.$550$275.0090-2297-01Filler plate card for the Hub slot of the Peripheral shelf. The Peripheral shelf has a total of 2 Hub card slots.$395$197.5090-2298-01This package contains seven filler plates for the DSC slots in a Switching Shelf or the High Speed Line Card slots in a High Speed Peripheral shelf.$1,250$625.0090-2322-01The Coax Adaptor provides two coaxial connectors for the OC3 and STM1 Electrical Interface Cards. The Coax Adaptor attaches to the rear I/O connectors of the Peripheral Shelf.$195$97.5090-2322-02The Coax Adaptor provides six coaxial connectors for the Triple DS3 and Triple E3 Interface Cards. The Coax Adaptor attaches to the rear I/O connectors of the Peripheral Shelf.$395$197.5090-2480-917470 Release 4.3 Documentation Package. Includes Technical Info rmation Installation Configuration and Maintenance Informati on.$325$162.5090-2480-927470 Release 5.0 Documentation Package. Includes Technical Info rmation Installation Configuration and Maintenance Informati on. Manuals are assembled in a binder.$325$162.5090-2480-93' 7470 Release 6.0 Documentation Package. Includes Technical Information Installation Configuration and Maintenance Informati on. Manuals are assembled in a binder.$325$162.5090-2517-51The 8 Port T1 Circuit Emulation Card multiplexes/ demultiplexes the circuits carried over a TDM channelized link and performs the necessary operations to allow the transport of these circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM Forum. Fits: 7470 or 7670 RSP ESE For 7670 RSP ESE, required adapter card is 90-7272-01 This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$14,800$7,400.0090-2517-53The 8 Port E1 Circuit Emulation Card with 75 ohm interface impedance multiplexes and demultiplexes the circuits carried over a TDM channelized link and performs the necessary operations to allow the transport of these circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM Forum. This card is not certified for use with the CE-EC echo cancellation modules. Use the 120 ohm 8-port CE card with the CE-EC modules.$18,800$9,400.0090-2517-61The 8 Port T1 Circuit Emulation Card multiplexes/ demultiplexes the circuits carried over a TDM channelized link and performs the necessary operations to allow the transport of these circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM Forum. Fits: 7470 or 7670 RSP ESE For 7670 RSP ESE, required adapter card is 90-7272-01.$14,700$7,350.0090-2517-62The 8 Port E1 Circuit Emulation Card multiplexes/demultiplexes the circuits over a TDM channelized link and performs the necessary operations to allow the transport of these circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM Forum. Fits: 7470 or 7670 RSP ESE For 7670 RSP ESE, required adapter card is 90-7272-01$14,800$7,400.0090-2517-72The 8 Port E1 Circuit Emulation Card multiplexes/demultiplexes the circuits over a TDM channelized link and performs the necessary operations to allow the transport of these circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM Forum. Fits: 7470 or 7670 RSP ESE For 7670 RSP ESE, required adapter card is 90-7272-01.$14,800$7,400.0090-2542-01The PRI AMP/CHAMP MAU provides a 50 pin connector for the 7470 multi-port PRI cards. It attaches to the rear I/O connectors of the Peripheral Shelf.$375$187.5090-2542-02The PRI Wire Wrap MAU provides a wire wrap connector for the 74 70 multi-port PRI cards. It attaches to the rear I/O connectors of the Peripheral Shelf. As of August 1 2003 the WW MAU will be RESTRICTED to NON EU customers only because it does not meet Class A EU2003 for Conducted emissions on I/O Lines. The recommended replacement part is the AMP Champ MAU: 90-2542-01 MAU,PRI AMP/CHAMP and 90-2542-04 MAU, PRI AMP/CHAMP.$625$312.5090-2542-03The PRI Wire Wrap MAU provides a wire wrap connector (66 posts) for the 7470 16 port PRI cards. It attaches to the rear I/O connectors of the Peripheral Shelf (DB78). As of August 1 2003 the WW MAU will be RESTRICTED to NON EU customers only because it does not meet Class A EU2003 for Conducted emissions on I/O Lines. The recommended replacement part is the AMP Champ MAU: 90-2542-01 MAU, PRI AMP/CHAMP and 90-2542-04 MAU, PRI AMP/CHAMP.$1,000$500.0090-2542-04The PRI AMP/CHAMP MAU provides a 64 pin connector for the 7470 16 port PRI cards. It attaches to the rear I/O connectors of the Peripheral Shelf (DB78).$600$300.0090-2542-05The PRI Wire Wrap MAU provides a wire wrap connector (66 posts) for the 16 port and 8 port PRI cards. It attaches to the rear I/O connectors of the 7670 ESE & 7350 Shelf (2 AMP/CHAMP 64 posts). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$1,000$500.0090-2543-01The PRI RJ45 Distribution Panel provides 8 external RJ45 interfaces to the 100 ohm T1 or 120 ohm E1 twisted pair ports of a PRI card. It may be used with PRI cards 90-4671-x1/x2, 90-2541-x1/x2, 90-2517-x1, 90-2544-x1/x2, and 90-7277-xx. The panel is a 1 vertical unit (VU) high rack-mountable device. For PRI CE cards (90-2517-x2), use the 90-5930-x1 E1 RJ45 ISDN D.PNL. This panel is shipped with 1VU mid-mount brackets.$695$347.5090-2543-02The PRI Coax Distribution Panel provides 8 external BNC interfaces to the 75 ohm E1 coaxial ports of a PRI card. It may be used with any of the PRI cards (90-2541-x3 or 90-2544-x3). A D.78 cable connects the PRI card to the panel which provides a BNC connector for each port TX and one for each port RX. The panel is a 1 vertical unit (VU) high rack-mountable device. Grounding switches allow the service personnel to independantly ground any of the coaxial shields. This panel is shipped with 1VU mid-mount brackets.$695$347.5090-2543-03The PRI Coax Distribution Panel provides 8 front mounted external BNC interfaces to the 75 ohm E1 coaxial ports of a PRI card. It may be used with any of the PRI cards (90-2541-x3 or 90-2544-x3). A D.78 cable connects the PRI card to the panel which provides a BNC connector for each port TX and one for each port RX. The panel is a 1 vertical unit (VU) high rack-mountable device. Grounding switches allow the service personnel to independantly ground any of the coaxial shields. This panel is shipped with 1VU mid-mount brackets. With the exception of offering front mounted BNC connectors, this assembly is identical to the 90-2543-02 .$695$347.5090-2766-01This 1 meter cable connects a 7470 E1 75 PRI CFR QUAD (90-2544-X3)to a PRI Coax Distribution Panel (90-2543-02). This cable may also be used to connect a 7470 E1 120 PRI CFR QUAD (90-2544-X2) or E1 PRI VSC QUAD(90-6757-X2)to a PRI BAL/UNBAL BNC Distribution Panel (90-6398-X1).$275$137.5090-2766-02This 1 meter cable connects a 7470 E1 75 PRI UFR OCT (90-2541-X3) E1 75 PRI CR OCT(90-4671-X3) or E1 75 PRI CE OCT (90-2517-X3) to the PRI Coax Distribution Panel (90-2543-02). This cable may also be used to connect a 7470 E1 120 PRI UFR OCT (90-2541-X2)E1 CR 120 ATM CARD(90-4671-X2)or E1 CE 120 8 PORT (90- 2517-X2) to a PRI BAL/UNBAL BNC Distribution Panel (90-6398-X1) or one side of a 16 port T1/E1 Distribution Panel (90-8307-X1).$325$162.5090-2766-21This 3 meter cable connects a 7470 E1 120 PRI CFR QUAD (90-2544-X2)or E1 PRI VSC QUAD (90-6757-X2) to a PRI BAL/UNBAL BNC Distribution Panel(90-6398-X1).$275$137.5090-2766-22This 3 meter cable connects a 7470 E1 120 PRI UFR OCT (90-2541-X2)E1 CR 120 ATM CARD (90-4671-X2)or E1 CE 120 8 PORT (90-2517-X2) to a PRI BAL/UNBAL BNC Distribution Panel (90-6398-X1) or one side of a 16 port T1/E1 Distribution Panel (90-8307-X1).$325$162.5090-2766-31This 10 meter cable connects a 7470 E1 120 PRI CFR QUAD (90-2544-X2)or E1 PRI VSC QUAD (90-6757-X2) to a PRI BAL/UNBAL BNC Distribution Panel(90-6398-X1).$450$225.0090-2766-32This 10 meter cable connects a 7470 E1 120 PRI UFR OCT (90-2541-X2) E1 CR 120 ATM CARD (90-4671-X2) or E1 CE 120 8 PORT (90 -2517-X2) to a PRI BAL/UNBAL BNC Distribution Panel (90-6398-X1) or one side of a 16 port T1/E1 Distribution Panel (90-8307-X1).$525$262.5090-2767-01This 1 meter cable connects a 7470 T1 PRI CFR QUAD (90-2544-X1) E1 120 PRI CFR QUAD(90-2544-X2) T1 PRI VSC QUAD (90-6757-X1) or E1 PRI VSC QUAD(90-6757-X2) to a PRI RJ45 Distribution Panel (90-2543-X1).$275$137.5090-2767-02This 1 meter cable connects a 7470 T1 PRI UFR OCTAL (90-2541-X1) E1 120 PRI UFR OCT(90-2541-X2)T1 CR ATM CARD (90-4671-X1)E1 CR 120 ATM CARD(90-4671-X2)T1 CE 8 PORT (90-2517-X1) or E1 CE 120 8 PORT(90-2517-X2) to a PRI RJ45 D.PNL (90-2543-X1) .$325$162.5090-2767-11This 3 meter cable connects a 7470 T1 PRI CFR QUAD (90-2544-X1) E1 120 PRI CFR QUAD(90-2544-X2) T1 PRI VSC QUAD (90-6757-X1) or E1 PRI VSC QUAD(90-6757-X2) to a PRI RJ45 Distribution Panel (90-2543-X1).$295$147.5090-2767-12This 3 meter cable connects a 7470 T1 PRI UFR OCTAL (90-2541-X1 ) E1 120 PRI UFR OCT (90-2541-X2) T1 CR ATM CARD (90-4671-X1 ) E1 CR 120 ATM CARD (90-4671-X2) T1 CE 8 PORT (90-2517-X1) or E1 CE 120 8 PORT (90-2517-X2) to a PRI RJ45 D.PNL (90-2543- X1).$345$172.5090-2767-21This 10 meter cable connects a 7470 T1 PRI CFR QUAD (90-2544-X1 ) E1 120 PRI CFR QUAD(90-2544-X2) T1 PRI VSC QUAD (90-6757-X1) or E1 PRI VSC QUAD(90-6757-X2) to a PRI RJ45 Distribution Panel (90-2543-X1).$475$237.5090-2767-22This 10 meter cable connects a 7470 T1 PRI UFR OCTAL (90-2541-X 1) E1 120 PRI UFR OCT (90-2541-X2) T1 CR ATM CARD (90-4671-X 1) E1 CR 120 ATM CARD (90-4671-X2) T1 CE 8 PORT (90-2517-X1) or E1 CE 120 8 PORT(90-2517-X2) to a PRI RJ45 D.PNL (90-2543- X1).$550$275.0090-2843-01Rack containing one 1100W, 100/120 VAC nominal to 48 VDC rectifier with mounting hardware, power cord and termination hardware for two rectifiers, as the rack can accomodate two rectifiers for a redundant configuration. A second rectifier is available by ordering an upgrade kit (90-2843-02). The rectifier rack is 3 rack units tall (5.25 ) and fits a standard 19 rack.$8,500$4,250.0090-2843-02A single 1100W 100/120 VAC nominal to 48 VDC rectifier with p ower cord. This rectifier plugs into the 7470 100/120 VAC to 48 VDC Rectifier rack (90-2843-01).$6,500$3,250.0090-2844-01Rack containing one 1680W, 220/240 VAC nominal to 48 VDC rectifier with mounting hardware, power cord and termination hardware for two rectifiers, as the rack can accomodate two rectifiers for a redundant configuration. A second rectifier is available by ordering an upgrade kit (90-2844-02). The rectifier rack is 3 rack units tall (5.25 ) and fits a standard 19 rack.$8,500$4,250.0090-2844-02A single 1680W 220/240 VAC nominal to 48 VDC rectifier with p ower cord. This rectifier plugs into the 7470 220/240 VAC to 48 VDC Rectifier rack (90-2844-01).$6,500$3,250.0090-2865-01The 10BaseT MAU provides an RJ45 8 position modular connector for the Service Card, providing access to the card's Ethernet port. The 10BaseT MAU attaches to the rear I/O connectors of the Peripheral Shelf.$195$97.5090-2918-01Identical to 90-2918-01 except tailored for MCI applications.$975$487.5090-3162-05The 7470 800M Hub Card can be used in place of a DHUB card in the Peripheral Shelf Cardfile. The 800M Hub card handles one bi-d irectional 800M ISL link which supports all 12 UCS slots in the shelf. The 800M hub card is suited for use in peripheral shelves where the total bandwidth of all interfaces is less than the bandwidth of one ISL. Two 800M Hub Cards are required per peripheral shelf (for fabric reduncancy) in multi-shelf systems. This card is delivered with R4.2 application software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$10,250$5,125.0090-3162-15The 7470 800M Hub Card can be used in place of a DHUB card in the Peripheral Shelf Cardfile. The 800M Hub card handles one bi-d irectional 800M ISL link which supports all 12 UCS slots in the shelf. The 800M hub card is suited for use in peripheral shelves where the total bandwidth of all interfaces is less than the bandwidth of one ISL. Two 800M Hub Cards are required per peripheral shelf (for fabric reduncancy) in multi-shelf systems.$10,250$5,125.0090-3162-24The Extended ISL (X-ISL) 800M Hub card provides one bi-directional 800M ISL link supporting all 12 UCS slots in a peripheral shelf. Two 800M Hub Cards are required per peripheral shelf for fabric redundancy in multi-shelf systems. This card is delivered with R4.2 application software. X-ISL reach is 15km over customer supplied Single Mode Fiber. SMF cable requirements are: 9/125 micron core/cladding, 0.35 dB/Km attenuation at 1310nm, flat polish SC/SC connector.$15,170$7,585.0090-3290-32The E3 Unchannelized Frame Relay Card provides a single standar ds-compliant E3 interface to the 7470 system. This interface terminates one unchannelized frame relay stream and will perform standards-based frame switching network-interworking or serv ice-interworking. This card is delivered with R4.2 software.$12,000$6,000.0090-3290-41The DS3 Unchannelized Frame Relay Card provides a single standa rds-compliant DS3 interface to the 7470 system. This interface t erminates one unchannelized frame relay stream and will perfor m standards-based frame switching network-interworking or se rvice-interworking. This card is deliver ed with R4.2 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$15,000$7,500.0090-3290-42The E3 Unchannelized Frame Relay Card provides a single standar ds-compliant E3 interface to the 7470 system. This interface terminates one unchannelized frame relay stream and will perform standards-based frame switching network-interworking or serv ice-interworking.$12,000$6,000.0090-3290-51The DS3 Unchannelized Frame Relay Card provides a single standa rds-compliant DS3 interface to the 7470 system. This interface t erminates one unchannelized frame relay stream and will perfor m standards-based frame switching network-interworking or se rvice-interworking.$15,000$7,500.0090-3346-07The Control Card 2 implements the control complex functions for the node. The Control Card 2 provides two RS-232 ports node management (local and/or remote NMTI), and one Ethernet 10BaseT interface port for network management system access. One Control Card is required for non-redundant control complex and two for control complex redundancy per 36170 system. Node management, alarm, and timing termination require a control card interconnect panel (CCIP). One CCIP serves both active and redundant control cards. There are two variants of CCIP for US Telco (90-2295-x1) and International (90-2295-x2) requirements. This card is delivered with R4.3 software, and with an enhanced Processor Module (ePM), and with a NAND-based 256MB memory card. Note that previous to this note, all control cards were shipped wih NOR-based memory cards. The software loadset required for this card is documented in Field Notice FN1867. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$21,500$10,750.0090-3346-17The Control Card 2 implements the control complex functions for the node. The Control Card 2 provides two RS-232 ports node management (local and/or remote NMTI), and one Ethernet 10BaseT interface port for network management system access. One Control Card is required for non-redundant control complex and two for control complex redundancy per 7470 system. Node management, alarm, and timing termination require a control card interconnect panel (CCIP). One CCIP serves both active and redundant control cards. There are two variants of CCIP for US Telco (90-2295-x1) and International (90-2295-x2)requirements. This card is delivered with R5.0 software and with an enhanced Processor.$21,500$10,750.0090-3346-27CONTROL CARD-2 W/EPM$21,500$10,750.0090-3346-41The Control Card 2 implements the control complex functions for the node. The Control Card 2 provides two RS-232 ports node management (local and/or remote NMTI), and one Ethernet 10BaseT interface port for network management system access. One Control Card is required for a non-redundant control complex and two for control complex redundancy per 36170 system. Node management, alarm, and timing termination require a control card interconnect panel (CCIP). One CCIP serves both active and redundant control cards. There are two variants of CCIP for US Telco (90-2295-x1) and International (90-2295-x2) requirements. This card is delivered with R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$16,640$8,320.0090-3347-01The Stratum 3 SSU-2 Module provides Stratum 3 timing synchroniz ation to an incoming timing signal for the 7470 system. The Stra tum 3 SSU-2 Module is an optional module for the Control Card 2 (90-3346-01) INTEG CALLP/PNNI CARD-2 R3.1 (90-6226-X1) and INTEG CALLP CARD-2/R3.1 (90-6226-X2). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$2,200$1,100.0090-3553-11The DS3 Channelized Frame Relay Card provides a single standard s-compliant DS3 interface to the 7470 system. This interface ter minates 256 frame relay streams and will perform standards-bas ed frame switching network-interworking or service-interwork ing. This card requires Release 4.2 for operational support and is delivered with R4.2 application software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$25,000$12,500.0090-3553-21The DS3 Channelized Frame Relay Card provides a single standard s-compliant DS3 interface to the 7470 system. This interface ter minates 256 frame relay streams and will perform standards-bas ed frame switching network-interworking or service-interwork ing.$25,000$12,500.0090-3598-34The Extended ISL (X-ISL) Dual Switching Card is a scalable cell switching fabric card which provides the transmit interface for two 800 Mbps X-ISL links. The X-ISL Dual Receiver Card terminates the two corresponding X-ISL link receive interfaces. One to eight Dual Switching shelf to support from 1.6 Gbps to 12.8 Gbps fabric capacity. This card is delivered with R4.2 application software. X-ISL reach is 15km over customer supplied Single Mode Fiber. SMF cable requirements are: 9/125 micron core/claddind, 0.35 dB/Km attenunation at 1310nm, flat polish SC/SC connector.$25,160$12,580.0090-3598-35The Dual Switching Card is a scalable cell switching fabric card which can terminate the transmit interface of up to two 800 Mbps ISL links. The associated Dual Receiver Card terminates the ISL link received interface. One to eight Dual Switching Cards can be installed in the Switching Shelf Cardfile to create cell fabrics of 1.6 Gbps to 12.8 Gbps. This card is delivered with R4.2 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$17,000$8,500.0090-3598-45The Dual Switching Card is a scalable cell switching fabric card which can terminate the transmit interface of up to two 800 Mbps ISL links. The associated Dual Receiver Card terminates the ISL link received interface. One to eight Dual Switching Cards can be installed in the Switching Shelf Cardfile to create cell fabrics of 1.6 Gbps to 12.8 Gbps.$17,000$8,500.0090-4672-01This module provides the Inverse Multiplexing for ATM capability for the T1/E1 ATM Cell Relay interface cards (90-6351-0x). The module supports either ATM Forum IMA v1.0 or v1.1 through separate software loads. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$5,000$2,500.0090-4686-01This CD is a 7470 MSP Technical Practices Library.$150$75.0090-4690-21The E3 Channelized Circuit Emulation Card provides a single 34 Mb/s TDM interface. The E3 port is channelized into 16 E1 channels. The card performs the ATM adaption function to map each of the 16 channels into ATM virtual circuits. The card is shipped with the DS3/E3 SWITCHING MAU (90-4919-01) which provides two pairs of coaxial connectors. This card is delivered with R4.0 application software.$14,000$7,000.0090-4724-01The 7470 Multi-Service Traffic Shaping Module (MTSM) is an optional module on cell-relay line cards designed to accept it (e.g. OC3-2). When installed it provides an additional 200K cells of buffering, per-VC queueing, per-VC shaping, ABR Virtual Source/Virtual Destination and other traffic management enhancements. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$8,500$4,250.0090-4905-1AThe OC3-2M IR UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The Intermediate Reach(IR) single mode fiber optical interface has a total loss budget of 12db. The OC3-2M IR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM,90-7695-01) which, when installed, provides enhanced traffic management features. This card variant is shipped with R4.3 S/W. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$16,000$8,000.0090-4905-1BThe OC3-2M LR UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The Long Reach (LR) single mode fiber optical inerface has a total loss budget of 28db. The OC3-2M LR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card variant is shipped with R4.3 S/W. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.$18,070$9,035.0090-4905-1CThe OC3-2M MMF Card with CPU-2 is a local ATM (LATM) OC3 interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The OC3-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. This card variant is shipped with R4.3 S/W.$11,050$5,525.0090-4905-2AThe OC3-2M IR UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The Intermediate Reach(IR) single mode fiber optical interface has a total loss budget of 12db. The OC3-2M IR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM,90-7695-01) which, when installed,provides enhanced traffic management features. This card variant is shipped with R5.0 S/W. This card is also supported on R2.0 of the 7670 E