EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 1
� EDT Solution® housings are USDA-accepted � All-Round® bearing with stainless outer ring + thin walled polymer promotes heat dissipation - Ideal in applications where environment is cooler than the operating temperature of
the bearing - Ideal in applications that require higher load capacity in radial applications
� Save time: zero maintenance without re-greasing or rust � Save money: reuse most components to maximize investment � Reduce production downtime: predictable wear, no catastrophic failure
Stainless All-Round® bearing in stainless or polymer housing is grease-less, non-corrosive, and low maintenance
All-Round® SoluTIon® MounTed BeARIngS
Ideal for HACCP programs
new for 2013
now featuring
KleanCap™ DoubleLock® sleeves
� More Sanitary
� Easier Installation
Page 2 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Stainless Insert
304-ss and 316-ss options for maximum corrosion resistance.Spherical design enables retrofit for industry standard mounted ball bearings.Long-term investment: mounted stainless inserts can be reused through multiple polymer bearing replacements.Stainless insert promotes heat dissipation for locations where the ambient temperature is lower than the temperature through the shaft.USDA-accepted.
All-Round® BearingsSolve Your Toughest Bearing and Shaft Problems
Spherical Series
Stainless Temp Range:Cryogenic to +1000°F
+ + =
Solution® Non-corrosive Bearing HousingsFeatures and benefits
� Smoothest surface finishes and no metal crush inserts for highest levels of sanitation.
� Option of QuiKlean® integral stand-off reduces ‘foot print’ and enables better wash down accessibility.
�Wide range of styles available. � Accepts EDT and other brands of inserts for re-grease or no-lube.
� Durable housings can be used multiple times.
Install Bearing Remove BearingInstallation Arbor
‘QB’ material can be used in 85% of All-Round®
applications � Temperature to 500°F/260°C
� USDA meat, poultry & dairy accepted for incidental food contact
� Void of animal fats for Kosher-certified processing
� Great price to performance
Note: ‘QB’ is not advised in submerged locations. ‘QF’ is better choice in moisture.
Flanged Polymer Bearing
Variety of polymers to accommodate diverse applications and PV capabilities.Flange endows radial motion bearings with thrust capacity. This is the wear component.
� When the wall wears thin, change the bearing with installation arbor.
� Other parts can be reused.Can be used as a bushing in idler or sprockets.
Locking sleeve
Two styles of locking sleeves available:
� KleanCap™DoubleLock®
� Setscrew lockSleeves offer multiple benefits:
� Eliminate shaft damage that plane bearings will cause.
� Provide highest quality journal for plane bearing to maximize bearing life.
� Repair damaged shaft by sleeving it with a precision machined component.
� Collar controls lateral shaft movement within the bearing.
� 316 stainless steel for maximum toughness.
Optimum plane bearing surface finish (8–16 rms).DoubleLock® mechanism has twice the clamping of setscrew.Note: It is recommended that a threadlocker be used on all stainless hardware.
KleanCap™ screws offers the highest level of sanitation with positive locking mechanism.
All-Round® Insert
Stainless steel insert with replaceable flanged polymer bearing is:
� Maintenance free � Compatible with industry standard insert bearings
� Corrosion resistant � Sanitary � Suitable where lubrication is difficult to maintain
� Cost effective alternative in severe service environments
� Long term investment: Stainless components can be reused through many changes of the polymer bearing.
Polymer Temp Range:-40°F to +150°F
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 3
In these applications:
� High tension applications (V-belt drives, flat belt conveyors, urethane belts)
� High speed devices (fans, pumps, table-top conveyors) � Overhung loads (unsupported shaft mounted gear reducers) � Trunnion applications
Ball bearings are recommended instead of plane bearings
All-Round® plane bearings are ideal for tough applications where ball bearings don’t perform as reliably as desired and there is a need to lower the functional PV especially in locations with:
� Sanitary – HACCP � High or low temperature �Washdown or steam � Exposure to processing liquids or chemicals � Incomplete rotation or oscillating motion � Locations difficult to regularly maintain
All-Round® bearings offer installation versatilityIn any configuration, the locking sleeve collar must run against the flange of the polymer
bearing to prevent metal-to-metal contact and heat buildup.
Mounting and installation instructions for EDT bearings are located in the User Handbook.
All-Round® bearings can be mounted horizontally or vertically.
They can also be assembled in different ways to adjust the total length-thru-bore (LTB) of a mounted set.
Bearing capacity is measured by PV and will determine the amount of heat generated in a plane bearing. PV is the relationship of the load to the shaft speed in a bearing. Factors influencing PV limits (heat generation) include:
� Material selection � Journal surface finish � Bearing wall thickness � Running clearance � Proximity to moisture � Ambient temperature � Cycle time
HOW TO CALCULATE PVPV - P x VP - pressure in PSI (lbs/sq in)V - velocity in SFM (surface ft/min)P - F/A where F = force (load) on bearing A = shaft dia (in) x LTB (LTB = bearing Length Through the Bore)V - .262 x D x RPM where D = shaft diameter (in) RPM = shaft revolutions/min
All-Round® Bearing
Materials** PV Limit*
Maximum Speed
V (SFM)
Maximum Loading P (PSI)
Continuous Operating Temp. ***
Performance in Moisture ∆ T Dimensional Stability with Temp Change
Chemical Resistance Abrasion Resistance
Impact Resistance
USDA/FDA Contact ApprovalWashdown Submerged
Bear
ings
PA UHMWwhite 1,000 50 800 150°F / 65°C Excellent Excellent Poor Excellent
Abrasion applications are very
non-predictable.
Each application must be tested for abrasion resistance.
Excellent Direct
NAgray 6,000 350 2,000 200°F / 93°C Excellent Good Fair Good Excellent Incidental
QBblack-green 50,000 400 3,000 500°F / 260°C Excellent Poor Excellent Fair Fair Incidental
QFblack 60,000 400 6,000 450°F / 232°C Excellent Excellent Excellent Excellent Fair Incidental
MYblack 20,000 100 1,000 800°F / 425°C Fair Fair Excellent Fair Good No
* PV limits are shown for non-lubricated radial bearing applications. Low temperature or submerged installation may permit PV limits up to 2x higher.** Material identifier when selecting parts. *** Intermittent may run hotter
PABUEO-E QBBUEO-E QFBUEO-E MYBUEO-E
Material Selection Chart
CAUTION
Page 4 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Flanged Polymer Bearing & Installation/Removal ArborEDT Locking Sleeves Extend Life of Plane and Polymer Bearings
x = Shaft Size mm∅Inch∅Ring
Group
All-Round® Flanged Polymer Bearing Insert All-Round® Spherical Insert Standard Flanged Bearing Insertion/Removal Tool
* Alphabetical shaft size indicates ID will accommodate locking sleeve. These are stocked
arbors; other sizes available upon request.
Setscrew Sleeve DoubleLock® Sleeve
A B C FD
Housing bore for press fit
Wt lbs
Part Number
_ _ = 2 letter Material ID
See p2 Material Chart
A B CD
(slot)
Wtlbs Wt
G1 F1 K1 L1 Standard Sleeve p/n
Wtlbs
G F K L H
Standard DoubleLock® Expansion Style
D Standard Sleeve p/n DStandard Expansion Length
(Other lengths available)mm in 16thsin
mmin
mmin
mmin
mm in p/nin
mmin
mmin
mmin
mm Tool p/nx= Shaft Diameter
RangeWt lbs
inmm
inmm
inmm
2 ea ss SHCS Narrow Sleeve p/n
inmm
inmm
inmm
2 ea ss SHCS
inmm
inmm Narrow Sleeve p/n
inmm
12
15
17
1/29/165/8
11/16
891011
401.575203A
125.4
.9223.3
.10 1.1328.6 1 .01
_ _BUAO-AZAIUAO 1.575
40.5
12.7.8120.6
.317.9 .2 PATUAO-x A*
1/2 11/16.04 .15
1.3132 0.38
91.1328
1/4 - 28ZALUA6-x
.18
1.3835.1 .44
11.21.3534.3
1/4 - 28 .7820.0
0.9423.8 ZALUA6-x-LK
1.5438 ZALUA6-x-04-LK
.8220.8 _ _CUAO-A 1.12
28.4 ZAMUA6-x 1.1629.5
.7218.3 ZAMUA6-x-LK
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
1.1328.6
1.0526.5
.10 1.2531.8 1.13 .01
_ _BUBO-BZAIUBO 1.850
47.5
12.7.9423.8
.4411.1 .3 PATUBO-x B*
1/2 3/4.05 .15
1.4435 0.38
91.2531
1/4 - 28ZALUB6-x
.2
1.5739.8 .50
12.71.6140.9
1/4 - 28 .9123.2
1.0727.2 ZALUB6-x-LK
1.6744 ZALUB6-x-04-LK
.8220.8 _ _CUBO-B 1.22
31.0 ZAMUB6-x 1.3534.3
.8521.6 ZAMUB6-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
1.5633.3
1.1128.1
.10 1.538.1 1.31 .02
_ _BUCO-CZAIUCO 2.047
52.5614.3
125.4
.4411.1 .4 PATUCO-x C*
3/4 1 .1 .15
1.5037 0.38
91.5037
1/4 - 28ZALUC6-x
.2
1.6341.4 .50
12.71.7343.9
1/4 - 28 1.1027.9
1.3033.0 ZALUC6-x-LK
1.7343 ZALUC6-x-04-LK
.9421.3 _ _CUCO-C 1.35
34.3 ZAMUC6-x 1.4737.3
.9724.6 ZAMUC6-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
1.5639.7
1.332.8
.10 1.7544.5 1.56 .03
_ _BUDO-D
ZAIUDO 2.44162
.717.9
1.1930.2
.4812.3 .7 PATUDO-x D*
1 11/4.2 .31
1.7944 0.48
121.7543
3/8 - 24
ZALUD6-x
.4
1.8246.2 .50
12.71.9850.3
1/4 - 28 1.3534.3
1.3233.5 ZALUD6-x-LK
1.9248 ZALUD6-x-04-LK
1.127.9 _ _CUDO-D 1.52
38.6 ZAMUD6-x 1.5439.1
1.0426.4 ZAMUD6-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
1.7544.5
1.4837.6
.10 250.8 1.75 .04
_ _BUEO-EZAIUEO 2.835
72.8822.2
1.3834.9
.5212.7 1.0 PATUEO-x E*
13/16 17/16.2 .55
2.049 0.50
122.0049
3/8 - 24ZALUE6-x
.5
2.0050.8 .50
12.72.2356.6
1/4 - 28 1.5439.1
1.538.1 ZALUE6-x-LK
2.1053 ZALUE6-x-04-LK
1.230.5 _ _CUEO-E 1.69
42.9 ZAMUE6-x 2.050.8
1.1930.2 ZAMUE6-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
1.9449.2
1.6140.8
.10 2.2557.2 1.94 .05
_ _BUFO-FZAIUFO 3.150
80.9122.9
1.538.1
.5415.2 1.6 PATUFO-x F*
17/16 15/8.3 .62
2.1954 0.56
142.2555
3/8 - 24ZALUF6-x
.6
2.1354.1 .50
12.72.3659.9
1/4 - 28 1.7343.9
1.6341.4 ZALUF6-x-LK
2.2356 ZALUF6-x-04-LK
1.3534.3 _ _CUFO-F 1.94
49.2 ZAMUF6-x 1.8847.7
1.3835.0 ZAMUF6-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
2.0652.4
1.6742.4
.10 2.563.5 2.06 .06
_ _BUGO-GZAIUGO 3.346
85.9724.6
1.5639.7
.5915.2 2.0 PATUGO-x G*
11/2 45mm .4 .86
2.2555 0.56
142.5061
3/8 - 24ZALUG6-x
.8
2.3258.9 .63
15.92.7369.3
5/16 - 24 1.8747.5
1.6942.9 ZALUG6-x-LK
2.2958 ZALUG6-x-04-LK
1.3233.5 _ _CUGO-G 1.92
49.8 ZAMUG6-x 2.3258.9
1.3634.5 ZAMUG6-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
2.5658.8
1.6742.4
.10 2.7569.9 2.31 .08
_ _BUHO-H
ZAIUHO 3.54390
.9724.6
1.5639.7
.5915.2 2.1 PATUHO-x H*
111/16 2 .5 1.0
2.2555
0.5614
2.6966
3/8 - 24
ZALUH6-x
1.1
2.3258.9
.6315.9
2.9875.7
5/16 - 24 2.1053.3
1.6942.9 ZALUH6-x-LK
2.2958 ZALUH6-x-04-LK
1.4236.0 _ _CUHO-H 2.01
51.0 ZAMUH6-x 2.0251.0
1.4536.8 ZAMUH6-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
2.5665.1
1.8647.1
.10 2.8873.0 2.56 .09
_ _BUIO-I
ZAIUIO 3.937100
1.1328.6
1.7544.5
.6315.9 2.8 PATUIO-x I*
115/16 21/4.7 1.3
2.4460
0.5614
2.8871
3/8 - 24
ZALUI6-x
1.3
2.5163.8
.6315.9
3.2382
5/16 - 24 2.3559.7
1.8847.0 ZALUI6-x-LK
2.4863 ZALUI6-x-04-LK
1.5840.1 _ _CUIO-I 2.17
55.0 ZAMUI6-x 2.2456.9
1.6140.9 ZAMUI6-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
2.7569.9
2.0953.3
.10 376.2 2.75 .12
_ _BUJO-JZAIUJO 4.331
1101.3434.1
250.8
.6616.7 3.9 PATUJO-x J*
23/16 27/16.9 1.3
2.6866 0.56
143.2580
3/8 - 24ZALUJ6-x
1.4
2.7569.9 .63
15.93.4086
5/16 - 24 2.5364.5
2.1253.8 ZALUJ6-x-LK
2.7269 ZALUJ6-x-04-LK
1.9549.5 _ _CUJO-J 2.54
64.5 ZAMUJ6-x 2.6166.3
1.9850.3 ZAMUJ6-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
3.0677.8
2.1153.5
.10 3.588.9 3.06 .12
_ _BUKO-K
ZAIUKO 4.921125
1.2531.8
250.8
.7519.0 5.4 PATUKO-x K*
27/16 70mm 1.0 3.0
2.8871 0.75
184.0098
1/2 - 20
ZALUK6-x
2.2
2.8873.2 .75
19.13.8597.8
3/8 - 24 2.8572.4
2.1353.3 ZALUK6-x-LK
2.7369 ZALUK6-x-04-LK
1.9549.5 _ _CUKO-K 2.73
69.3 ZAMUK6-x 2.7369.3
1.9850.3 ZAMUK6-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
3.3885.8
2.1153.6
.10 4101.6 3.25 .13
_ _BULO-L
ZAIULO 5.118130
1.1930.2
250.8
.8120.6 5.5 PATULO-x L*
211/16 3 1.2 2.2
2.8871
0.7518
4.0098
1/2 - 20 ZALUL6-x 2.3
2.8873.2
.7519.1
4.13105
3/8 - 24 3.1479.8
2.1353.3
ZALUL6-x-LK 2.7369 ZALUL6-x-04-LK
2.1153.6 _ _CULO-L 2.88
73.12.8873.1
2.1354.1
80
2-3/42-7/8
2-15/163
3-3/16
4446474851
1405.511216M
3.589.0
2.3459.7 .10 4
101.6 3.499 .13 _ _BUMO-M ZAIUMO 5.511140
1.4135.7
2.2557.2
.8321.5 7.2 PATUMO-x M*
215/16 33/161.5 3.0 3.16
770.7518
4.50110
1/2 - 20 ZALUM6-x 3.2 3.1379.5
.7519.1
4.45113
3/8 - 24 3.2883.5
2.3859.7 ZALUM6-x-LK 3.05
60 ZALUM6-x-04-LK
90
2-3/42-15/163-1/43-7/163-1/2
4447525556
1606.299218O
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3.0 3.5590
.7518
4.44113
1/2 - 20 ZALUO6-x 3.2 3.5389.7
.7519.1
4.10104.1
3/8 - 24 3.7094
2.7870.6 ZALUO6-x-LK 3.40
86.4 ZALUO6-x-04-LK
Install Bearing Remove Bearing
Installation arbor allows placement of outer ring into housing, then used to change-out the polymer
(the wear component).
D
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 5
Locking Sleeves: DoubleLock® or Setscrew Lock316 Stainless Locking Sleeve Extends Bearing Life and Eliminates Shaft Damage
x = Shaft Size mm∅Inch∅Ring
Group
All-Round® Flanged Polymer Bearing Insert All-Round® Spherical Insert Standard Flanged Bearing Insertion/Removal Tool
* Alphabetical shaft size indicates ID will accommodate locking sleeve. These are stocked
arbors; other sizes available upon request.
Setscrew Sleeve DoubleLock® Sleeve
A B C FD
Housing bore for press fit
Wt lbs
Part Number
_ _ = 2 letter Material ID
See p2 Material Chart
A B CD
(slot)
Wtlbs Wt
G1 F1 K1 L1 Standard Sleeve p/n
Wtlbs
G F K L H
Standard DoubleLock® Expansion Style
D Standard Sleeve p/n DStandard Expansion Length
(Other lengths available)mm in 16thsin
mmin
mmin
mmin
mm in p/nin
mmin
mmin
mmin
mm Tool p/nx= Shaft Diameter
RangeWt lbs
inmm
inmm
inmm
2 ea ss SHCS Narrow Sleeve p/n
inmm
inmm
inmm
2 ea ss SHCS
inmm
inmm Narrow Sleeve p/n
inmm
12
15
17
1/29/165/8
11/16
891011
401.575203A
125.4
.9223.3
.10 1.1328.6 1 .01
_ _BUAO-AZAIUAO 1.575
40.5
12.7.8120.6
.317.9 .2 PATUAO-x A*
1/2 11/16.04 .15
1.3132 0.38
91.1328
1/4 - 28ZALUA6-x
.18
1.3835.1 .44
11.21.3534.3
1/4 - 28 .7820.0
0.9423.8 ZALUA6-x-LK
1.5438 ZALUA6-x-04-LK
.8220.8 _ _CUAO-A 1.12
28.4 ZAMUA6-x 1.1629.5
.7218.3 ZAMUA6-x-LK
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
1.1328.6
1.0526.5
.10 1.2531.8 1.13 .01
_ _BUBO-BZAIUBO 1.850
47.5
12.7.9423.8
.4411.1 .3 PATUBO-x B*
1/2 3/4.05 .15
1.4435 0.38
91.2531
1/4 - 28ZALUB6-x
.2
1.5739.8 .50
12.71.6140.9
1/4 - 28 .9123.2
1.0727.2 ZALUB6-x-LK
1.6744 ZALUB6-x-04-LK
.8220.8 _ _CUBO-B 1.22
31.0 ZAMUB6-x 1.3534.3
.8521.6 ZAMUB6-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
1.5633.3
1.1128.1
.10 1.538.1 1.31 .02
_ _BUCO-CZAIUCO 2.047
52.5614.3
125.4
.4411.1 .4 PATUCO-x C*
3/4 1 .1 .15
1.5037 0.38
91.5037
1/4 - 28ZALUC6-x
.2
1.6341.4 .50
12.71.7343.9
1/4 - 28 1.1027.9
1.3033.0 ZALUC6-x-LK
1.7343 ZALUC6-x-04-LK
.9421.3 _ _CUCO-C 1.35
34.3 ZAMUC6-x 1.4737.3
.9724.6 ZAMUC6-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
1.5639.7
1.332.8
.10 1.7544.5 1.56 .03
_ _BUDO-D
ZAIUDO 2.44162
.717.9
1.1930.2
.4812.3 .7 PATUDO-x D*
1 11/4.2 .31
1.7944 0.48
121.7543
3/8 - 24
ZALUD6-x
.4
1.8246.2 .50
12.71.9850.3
1/4 - 28 1.3534.3
1.3233.5 ZALUD6-x-LK
1.9248 ZALUD6-x-04-LK
1.127.9 _ _CUDO-D 1.52
38.6 ZAMUD6-x 1.5439.1
1.0426.4 ZAMUD6-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
1.7544.5
1.4837.6
.10 250.8 1.75 .04
_ _BUEO-EZAIUEO 2.835
72.8822.2
1.3834.9
.5212.7 1.0 PATUEO-x E*
13/16 17/16.2 .55
2.049 0.50
122.0049
3/8 - 24ZALUE6-x
.5
2.0050.8 .50
12.72.2356.6
1/4 - 28 1.5439.1
1.538.1 ZALUE6-x-LK
2.1053 ZALUE6-x-04-LK
1.230.5 _ _CUEO-E 1.69
42.9 ZAMUE6-x 2.050.8
1.1930.2 ZAMUE6-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
1.9449.2
1.6140.8
.10 2.2557.2 1.94 .05
_ _BUFO-FZAIUFO 3.150
80.9122.9
1.538.1
.5415.2 1.6 PATUFO-x F*
17/16 15/8.3 .62
2.1954 0.56
142.2555
3/8 - 24ZALUF6-x
.6
2.1354.1 .50
12.72.3659.9
1/4 - 28 1.7343.9
1.6341.4 ZALUF6-x-LK
2.2356 ZALUF6-x-04-LK
1.3534.3 _ _CUFO-F 1.94
49.2 ZAMUF6-x 1.8847.7
1.3835.0 ZAMUF6-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
2.0652.4
1.6742.4
.10 2.563.5 2.06 .06
_ _BUGO-GZAIUGO 3.346
85.9724.6
1.5639.7
.5915.2 2.0 PATUGO-x G*
11/2 45mm .4 .86
2.2555 0.56
142.5061
3/8 - 24ZALUG6-x
.8
2.3258.9 .63
15.92.7369.3
5/16 - 24 1.8747.5
1.6942.9 ZALUG6-x-LK
2.2958 ZALUG6-x-04-LK
1.3233.5 _ _CUGO-G 1.92
49.8 ZAMUG6-x 2.3258.9
1.3634.5 ZAMUG6-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
2.5658.8
1.6742.4
.10 2.7569.9 2.31 .08
_ _BUHO-H
ZAIUHO 3.54390
.9724.6
1.5639.7
.5915.2 2.1 PATUHO-x H*
111/16 2 .5 1.0
2.2555
0.5614
2.6966
3/8 - 24
ZALUH6-x
1.1
2.3258.9
.6315.9
2.9875.7
5/16 - 24 2.1053.3
1.6942.9 ZALUH6-x-LK
2.2958 ZALUH6-x-04-LK
1.4236.0 _ _CUHO-H 2.01
51.0 ZAMUH6-x 2.0251.0
1.4536.8 ZAMUH6-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
2.5665.1
1.8647.1
.10 2.8873.0 2.56 .09
_ _BUIO-I
ZAIUIO 3.937100
1.1328.6
1.7544.5
.6315.9 2.8 PATUIO-x I*
115/16 21/4.7 1.3
2.4460
0.5614
2.8871
3/8 - 24
ZALUI6-x
1.3
2.5163.8
.6315.9
3.2382
5/16 - 24 2.3559.7
1.8847.0 ZALUI6-x-LK
2.4863 ZALUI6-x-04-LK
1.5840.1 _ _CUIO-I 2.17
55.0 ZAMUI6-x 2.2456.9
1.6140.9 ZAMUI6-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
2.7569.9
2.0953.3
.10 376.2 2.75 .12
_ _BUJO-JZAIUJO 4.331
1101.3434.1
250.8
.6616.7 3.9 PATUJO-x J*
23/16 27/16.9 1.3
2.6866 0.56
143.2580
3/8 - 24ZALUJ6-x
1.4
2.7569.9 .63
15.93.4086
5/16 - 24 2.5364.5
2.1253.8 ZALUJ6-x-LK
2.7269 ZALUJ6-x-04-LK
1.9549.5 _ _CUJO-J 2.54
64.5 ZAMUJ6-x 2.6166.3
1.9850.3 ZAMUJ6-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
3.0677.8
2.1153.5
.10 3.588.9 3.06 .12
_ _BUKO-K
ZAIUKO 4.921125
1.2531.8
250.8
.7519.0 5.4 PATUKO-x K*
27/16 70mm 1.0 3.0
2.8871 0.75
184.0098
1/2 - 20
ZALUK6-x
2.2
2.8873.2 .75
19.13.8597.8
3/8 - 24 2.8572.4
2.1353.3 ZALUK6-x-LK
2.7369 ZALUK6-x-04-LK
1.9549.5 _ _CUKO-K 2.73
69.3 ZAMUK6-x 2.7369.3
1.9850.3 ZAMUK6-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
3.3885.8
2.1153.6
.10 4101.6 3.25 .13
_ _BULO-L
ZAIULO 5.118130
1.1930.2
250.8
.8120.6 5.5 PATULO-x L*
211/16 3 1.2 2.2
2.8871
0.7518
4.0098
1/2 - 20 ZALUL6-x 2.3
2.8873.2
.7519.1
4.13105
3/8 - 24 3.1479.8
2.1353.3
ZALUL6-x-LK 2.7369 ZALUL6-x-04-LK
2.1153.6 _ _CULO-L 2.88
73.12.8873.1
2.1354.1
80
2-3/42-7/8
2-15/163
3-3/16
4446474851
1405.511216M
3.589.0
2.3459.7 .10 4
101.6 3.499 .13 _ _BUMO-M ZAIUMO 5.511140
1.4135.7
2.2557.2
.8321.5 7.2 PATUMO-x M*
215/16 33/161.5 3.0 3.16
770.7518
4.50110
1/2 - 20 ZALUM6-x 3.2 3.1379.5
.7519.1
4.45113
3/8 - 24 3.2883.5
2.3859.7 ZALUM6-x-LK 3.05
60 ZALUM6-x-04-LK
90
2-3/42-15/163-1/43-7/163-1/2
4447525556
1606.299218O
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3.0 3.5590
.7518
4.44113
1/2 - 20 ZALUO6-x 3.2 3.5389.7
.7519.1
4.10104.1
3/8 - 24 3.7094
2.7870.6 ZALUO6-x-LK 3.40
86.4 ZALUO6-x-04-LK
� ZALU_6-x-04(LC) sleeve is 0.6" longer ‘G’ and ‘G1’ dimension to accommodate shaft expansion � "M" in place of "L" Indicates narrow/shorter/"ER" sleeve
Setscrew Sleeve DoubleLock® Sleeve
Page 6 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Pillow BlockPolymer or Stainless Standard Backing Height (“1” Series) and Low Backing Height (“10” Series) Pillow Block
Sample p/n 1GC
Sample p/n 1AI-Split
Sample p/n 1GE-QK
*QuiKlean® adds .625” (5/8”) standoff
(Low back pillow block not available as QuiKlean®)
x = Shaft Size
mm∅Inch∅Ring
Group
“1” Series (Std) “10” Series (Low)
QP
MinP
MaxN V
R Q U DoubleLock® Sleeve
A B E
Pillow Block Assembly
Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Zp/n Z p/n KG SS Bolt size KG SS
F K Polymer (KG) Stainless (SS) Z1* N1* V1*
mm in 16thsin
mmKGSS
inmm
KGSS
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
Std Assembly
Wtlbs
MA MB MC MDStd Assembly
Wtlbs
MA MB MC MDQK Assembly QK Assembly
Low Assembly in in in in Low Assembly in in in in
121517
1/29/165/8
11/16
891011
401.575203A
1.0627.0
1GA1AA
-- -- 5127
2.9474.6
4.06103.2
.4411.1
2.2557.2 1.25
31.81.1328.6 3/8 .62
15.8.5714.5
.4411.2
1.4938
1.0426.4
.6015.2
.7519.1
_ _1GA9-x-LK .71.6742.4
1.3734.7
1.6742.4
1.3835.0
_ _1AA9-x-LK 1.41.604.7
1.3133.3
1.604.7
1.3133.3
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK
_ _1GA-QK9-x-LK .7 _ _1AA-QK9-x-LK 1.41.6942.9 1GA-QK 1.06
26.92.8772.9 n/a -- n/a --
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
1.3133.3
1GB1AB 1.25
31.810GB10AB
5.25133.4
3.2582.6
4.38111.1
.5012.7
2.6968.3 1.38
34.91.1328.6 3/8 .57
14.5.5714.5
.5012.7
1.6341
1.1027.9
.6015.2
.9423.8
_ _1GB9-x-LK .9
1.7945.4
1.6241.1
1.7845.2
1.6241.1
_ _1AB9-x-LK 2.1
1.6642.1
1.538.1
1.6642.1
1.538.1
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
_ _1GB-QK9-x-LK .9 _ _1AB-QK9-x-LK 2.1
1.9449.2 1GB-QK 1.13
28.63.3184.1 _ _10GB9-x-LK .9 _ _10AB9-x-LK 2.1
25
3/413/167/8
15/161
1213141516
522.047205C
1.4436.5
1GC1AC 1.31
33.310GC10AC
5.5139.7
3.4487.3
4.63117.5
.5614.3
2.9474.6 1.50
38.11.1328.6 3/8 .75
18.0.5714.5
.5012.7
1.7544
1.1629.5
.6616.8
.9423.8
_ _1GC9-x-LK 1.11.9148.5
1.6942.9
1.9148.5
1.6942.9
_ _1AC9-x-LK 2.61.7343.9
1.538.1
1.7343.9
1.538.1
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
_ _1GC-QK9-x-LK 1.1 _ _1AC-QK9-x-LK 2.62.0652.4
1GC-QK1AC-QK
1.193.2
3.569.5 _ _10GC9-x-LK 1.0 _ _10AC9-x-LK 2.6
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
1.6942.9
1GD1AD 1.56
39.710GD10AD
6.25158.7
4.13104.8
5.1313.2
.6917.5
3.3885.7 1.75
44.51.5038.1 1/2 .88
22.4.7619.3
.5012.7
2.050
1.3032.9
.802.2
.9925.1
_ _1GD9-x-LK 1.7
2.1755.1
1.8747.4
2.1755.1
.8722.0
_ _1AD9-x-LK 3.1
2.0351.5
1.7343.9
2.0351.5
1.7343.9
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
_ _1GD-QK9-x-LK 1.7 _ _1AD-QK9-x-LK 3.1
2.3158.7 1GD-QK 1.31
33.34.0
101.6 _ _10GD9-x-LK 1.7 _ _10AD9-x-LK 3.1
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
1.8847.6
1GE1AE 1.81
46.010GE10AE
6.56166.7
4.69119.1
5.44138.1
.6917.5
3.8898.4 1.75
44.51.5038.1 1/2 .93
23.6.7418.8
.5012.7
2.2557
1.4737.3
.9724.6
125.4
_ _1GE9-x-LK 2.52.3559.6
1.8847.7
2.3559.6
1.8847.7
_ _1AE9-x-LK 5.02.2156.1
1.7444.1
2.2156.1
1.7444.1
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
_ _1GE-QK9-x-LK 2.5 _ _1AE-QK9-x-LK 5.02.5063.5 1GE-QK 1.31
33.34.50114.3 _ _10GE9-x-LK 2.5 _ _10AE9-x-LK 5.0
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
2.1354.0
1GF1AF 1.94
49.210GF10AF
7.25184.2
5127.0
6.13155.6
.7519.1
4.31109.5 1.94
49.21.6341.3 1/2 .97
24.6.8120.6
.5012.7
2.3860
1.5138.3
1.0125.6
1.0927.8
_ _1GF9-x-LK 3.4
2.4862.9
2.0652.3
2.4862.9
2.0652.3
_ _1AF9-x-LK 7.0
2.3258.9
1.9148.5
2.3258.9
1.9148.5
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
_ _1GF-QK9-x-LK 3.4 _ _1AF-QK9-x-LK 7.0
2.7569.9 1GF-QK 1.38
34.94.94125.4 _ _10GF9-x-LK 3.4 _ _10AF9-x-LK 7.0
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
2.1354.0
1GH1AH
2.0652.4
10GG10AG
7.44188.9
5.31134.9
6.3116.3
.7519.1
4.38111.1
25.8
1.7544.5 1/2 1.0
25.4.8621.8
.6315.9
2.7570
1.6943.0
1.0727.2
1.2231
_ _1GG9-x-LK 3.9 2.6968.3
2.2256.3
2.6968.3
2.2256.3
_ _1AG9-x-LK 7.9 2.5564.7
2.0852.8
2.5564.7
2.0852.8
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK_ _10GG9-x-LK 3.9 _ _10AG9-x-LK 7.9
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
2.2557.2
1GH1AH
2.1955.6
10GH10AH
8.13206.4
5.88149.2
6.75171.5
.7519.1
4.63117.5
2.2557.2
25.8 5/8 1.1
27.9.9925.2
.6315.9
376
1.6943.0
1.0727.2
1.2231
_ _1GH9-x-LK 4.22.9474.6
2.4762.7
2.9474.6
2.4762.7
_ _1AH9-x-LK 9.82.6868.0
2.255.8
2.6868.0
2.255.8
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK_ _10GH9-x-LK 4.2 _ _10AH9-x-LK 9.8
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
2.5063.5
1GI1AI
2.4461.9
10GI10AI
8.88225.4
6.38161.9
7.5019.5
.8822.2
5.1313.2
2.386.3
25.8 5/8 1.17
29.7.9925.2
.6315.9
3.2583
1.8547.0
1.2231.1
1.2531.8
_ _1GI9-x-LK 5.63.0477.2
2.4461.9
3.0477.2
2.4461.9
_ _1AI9-x-LK 11.82.8472.1
2.2156.1
2.8472.1
2.2456.8
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
_ _10GI9-x-LK 5.6 _ _10AI9-x-LK 11.6
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
2.7569.9
1GJ1AJ
2.6968.3
10GJ10AJ
9.5241.3
6.44163.5
8.13206.4
.8822.2
5.50139.7
2.5063.5
25.8 5/8 1.25
31.2.9925.2
.6315.9
3.486
2.0652.4
1.4436.5
1.2832.5
_ _1GJ9-x-LK 7.03.3184.0
2.5364.2
3.3184.0
2.5364.2
_ _1AJ9-x-LK 13.53.0577.4
2.2757.6
3.0577.4
2.2757.6
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK_ _10GJ9-x-LK 7.0 _ _10AJ9-x-LK 13.3
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
3.076.2
1GK1AK
3.1379.4
10GK10AK
1.75273.1
7.44188.9
9.13231.8
.9423.8
6.25158.7
2.7569.9
25.8 3/4 1.34
34.0.9925.2
.7519.1
3.896
2.1053.3
1.3534.3
1.5038.1
_ _1GK9-x-LK 9.83.4888.3
2.8873.1
3.4888.3
2.8873.1
_ _1AK9-x-LK 17.83.0978.4
2.4963.2
3.0978.4
2.4963.2
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK_ _10GK9-x-LK 10.0 _ _10AK9-x-LK 18.0
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
3.5088.9
1GL1AL
3.2582.5
10GL10AL
11.75298.5
8.25209.6
9.75247.7
125.4
6.88174.6
2.8873.0
25.8 7/8 1.4
35.61.2431.5
.7519.1
4.13105
2.0451.8
1.2932.7
1.5639.7
_ _1GL9-x-LK 10.23.4888.3
376.2
3.4888.3
376.2
_ _1AL9-x-LK 23.33.2783.0
2.871.1
3.2783.0
2.871.1
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
_ _10GL9-x-LK 10.2 _ _10AL9-x-LK 23.0
80
2-3/42-7/8
2-15/163
3-1/83-3/16
444647485051
1405.511216M
3.5088.9
1GM1AM -- -- 11.75
298.58.25209.6
9.75247.7
125.4
6.88174.6
2.8873.0
25.8 7/8 1.4
35.61.2431.5
.7519
4.7120
2.2657.4
1.5138.4
1.594.4
_ _1GM9-x-LK 10.93.5088.8
2.8371.8
3.588.8
2.8371.8
_ _1AM9-x-LK 24.03.7093.9
376.9
3.793.9
3.0376.9
_ _BUMO-xZALUM6-x-LK_ _IUM9-x-LK_ _10GM9-x-LK 10.9 _ _10AM9-x-LK 24.0
90
2-3/42-15/163-1/43-7/163-1/2
4447525556
1606.299218O
4101.6
--1AO -- -- 14
355.61.3
261.611.63295.4
1.9449.3
8203.2 -- 2.22
56.4 7/8 -- 1.1128.2
.7519
4.1104.1
2.358.4
1.253.3
1.9549.5 -- -- 3.41
86.73.0677.6
3.4186.7
3.0677.7 _ _1AO9-x-LK 3.74
953.3986.0
3.7495
3.39886
_ _BUOO-xZALUO6-x-LK_ _IUO9-x-LK
Standard QuiKlean®
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 7
Sample p/n QB1AC9-1-LK Sample p/n QB1GC9-1-LK
All-Round® Solution® Pillow BlockStandard Backing Height (“1” Series) and Low Backing Height (“10” Series) Housing With All-Round® Spherical Bearing Insert
x = Shaft Size
mm∅Inch∅Ring
Group
“1” Series (Std) “10” Series (Low)
QP
MinP
MaxN V
R Q U DoubleLock® Sleeve
A B E
Pillow Block Assembly
Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Zp/n Z p/n KG SS Bolt size KG SS
F K Polymer (KG) Stainless (SS) Z1* N1* V1*
mm in 16thsin
mmKGSS
inmm
KGSS
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
Std Assembly
Wtlbs
MA MB MC MDStd Assembly
Wtlbs
MA MB MC MDQK Assembly QK Assembly
Low Assembly in in in in Low Assembly in in in in
121517
1/29/165/8
11/16
891011
401.575203A
1.0627.0
1GA1AA
-- -- 5127
2.9474.6
4.06103.2
.4411.1
2.2557.2 1.25
31.81.1328.6 3/8 .62
15.8.5714.5
.4411.2
1.4938
1.0426.4
.6015.2
.7519.1
_ _1GA9-x-LK .71.6742.4
1.3734.7
1.6742.4
1.3835.0
_ _1AA9-x-LK 1.41.604.7
1.3133.3
1.604.7
1.3133.3
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK
_ _1GA-QK9-x-LK .7 _ _1AA-QK9-x-LK 1.41.6942.9 1GA-QK 1.06
26.92.8772.9 n/a -- n/a --
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
1.3133.3
1GB1AB 1.25
31.810GB10AB
5.25133.4
3.2582.6
4.38111.1
.5012.7
2.6968.3 1.38
34.91.1328.6 3/8 .57
14.5.5714.5
.5012.7
1.6341
1.1027.9
.6015.2
.9423.8
_ _1GB9-x-LK .9
1.7945.4
1.6241.1
1.7845.2
1.6241.1
_ _1AB9-x-LK 2.1
1.6642.1
1.538.1
1.6642.1
1.538.1
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
_ _1GB-QK9-x-LK .9 _ _1AB-QK9-x-LK 2.1
1.9449.2 1GB-QK 1.13
28.63.3184.1 _ _10GB9-x-LK .9 _ _10AB9-x-LK 2.1
25
3/413/167/8
15/161
1213141516
522.047205C
1.4436.5
1GC1AC 1.31
33.310GC10AC
5.5139.7
3.4487.3
4.63117.5
.5614.3
2.9474.6 1.50
38.11.1328.6 3/8 .75
18.0.5714.5
.5012.7
1.7544
1.1629.5
.6616.8
.9423.8
_ _1GC9-x-LK 1.11.9148.5
1.6942.9
1.9148.5
1.6942.9
_ _1AC9-x-LK 2.61.7343.9
1.538.1
1.7343.9
1.538.1
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
_ _1GC-QK9-x-LK 1.1 _ _1AC-QK9-x-LK 2.62.0652.4
1GC-QK1AC-QK
1.193.2
3.569.5 _ _10GC9-x-LK 1.0 _ _10AC9-x-LK 2.6
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
1.6942.9
1GD1AD 1.56
39.710GD10AD
6.25158.7
4.13104.8
5.1313.2
.6917.5
3.3885.7 1.75
44.51.5038.1 1/2 .88
22.4.7619.3
.5012.7
2.050
1.3032.9
.802.2
.9925.1
_ _1GD9-x-LK 1.7
2.1755.1
1.8747.4
2.1755.1
.8722.0
_ _1AD9-x-LK 3.1
2.0351.5
1.7343.9
2.0351.5
1.7343.9
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
_ _1GD-QK9-x-LK 1.7 _ _1AD-QK9-x-LK 3.1
2.3158.7 1GD-QK 1.31
33.34.0
101.6 _ _10GD9-x-LK 1.7 _ _10AD9-x-LK 3.1
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
1.8847.6
1GE1AE 1.81
46.010GE10AE
6.56166.7
4.69119.1
5.44138.1
.6917.5
3.8898.4 1.75
44.51.5038.1 1/2 .93
23.6.7418.8
.5012.7
2.2557
1.4737.3
.9724.6
125.4
_ _1GE9-x-LK 2.52.3559.6
1.8847.7
2.3559.6
1.8847.7
_ _1AE9-x-LK 5.02.2156.1
1.7444.1
2.2156.1
1.7444.1
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
_ _1GE-QK9-x-LK 2.5 _ _1AE-QK9-x-LK 5.02.5063.5 1GE-QK 1.31
33.34.50114.3 _ _10GE9-x-LK 2.5 _ _10AE9-x-LK 5.0
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
2.1354.0
1GF1AF 1.94
49.210GF10AF
7.25184.2
5127.0
6.13155.6
.7519.1
4.31109.5 1.94
49.21.6341.3 1/2 .97
24.6.8120.6
.5012.7
2.3860
1.5138.3
1.0125.6
1.0927.8
_ _1GF9-x-LK 3.4
2.4862.9
2.0652.3
2.4862.9
2.0652.3
_ _1AF9-x-LK 7.0
2.3258.9
1.9148.5
2.3258.9
1.9148.5
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
_ _1GF-QK9-x-LK 3.4 _ _1AF-QK9-x-LK 7.0
2.7569.9 1GF-QK 1.38
34.94.94125.4 _ _10GF9-x-LK 3.4 _ _10AF9-x-LK 7.0
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
2.1354.0
1GH1AH
2.0652.4
10GG10AG
7.44188.9
5.31134.9
6.3116.3
.7519.1
4.38111.1
25.8
1.7544.5 1/2 1.0
25.4.8621.8
.6315.9
2.7570
1.6943.0
1.0727.2
1.2231
_ _1GG9-x-LK 3.9 2.6968.3
2.2256.3
2.6968.3
2.2256.3
_ _1AG9-x-LK 7.9 2.5564.7
2.0852.8
2.5564.7
2.0852.8
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK_ _10GG9-x-LK 3.9 _ _10AG9-x-LK 7.9
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
2.2557.2
1GH1AH
2.1955.6
10GH10AH
8.13206.4
5.88149.2
6.75171.5
.7519.1
4.63117.5
2.2557.2
25.8 5/8 1.1
27.9.9925.2
.6315.9
376
1.6943.0
1.0727.2
1.2231
_ _1GH9-x-LK 4.22.9474.6
2.4762.7
2.9474.6
2.4762.7
_ _1AH9-x-LK 9.82.6868.0
2.255.8
2.6868.0
2.255.8
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK_ _10GH9-x-LK 4.2 _ _10AH9-x-LK 9.8
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
2.5063.5
1GI1AI
2.4461.9
10GI10AI
8.88225.4
6.38161.9
7.5019.5
.8822.2
5.1313.2
2.386.3
25.8 5/8 1.17
29.7.9925.2
.6315.9
3.2583
1.8547.0
1.2231.1
1.2531.8
_ _1GI9-x-LK 5.63.0477.2
2.4461.9
3.0477.2
2.4461.9
_ _1AI9-x-LK 11.82.8472.1
2.2156.1
2.8472.1
2.2456.8
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
_ _10GI9-x-LK 5.6 _ _10AI9-x-LK 11.6
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
2.7569.9
1GJ1AJ
2.6968.3
10GJ10AJ
9.5241.3
6.44163.5
8.13206.4
.8822.2
5.50139.7
2.5063.5
25.8 5/8 1.25
31.2.9925.2
.6315.9
3.486
2.0652.4
1.4436.5
1.2832.5
_ _1GJ9-x-LK 7.03.3184.0
2.5364.2
3.3184.0
2.5364.2
_ _1AJ9-x-LK 13.53.0577.4
2.2757.6
3.0577.4
2.2757.6
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK_ _10GJ9-x-LK 7.0 _ _10AJ9-x-LK 13.3
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
3.076.2
1GK1AK
3.1379.4
10GK10AK
1.75273.1
7.44188.9
9.13231.8
.9423.8
6.25158.7
2.7569.9
25.8 3/4 1.34
34.0.9925.2
.7519.1
3.896
2.1053.3
1.3534.3
1.5038.1
_ _1GK9-x-LK 9.83.4888.3
2.8873.1
3.4888.3
2.8873.1
_ _1AK9-x-LK 17.83.0978.4
2.4963.2
3.0978.4
2.4963.2
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK_ _10GK9-x-LK 10.0 _ _10AK9-x-LK 18.0
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
3.5088.9
1GL1AL
3.2582.5
10GL10AL
11.75298.5
8.25209.6
9.75247.7
125.4
6.88174.6
2.8873.0
25.8 7/8 1.4
35.61.2431.5
.7519.1
4.13105
2.0451.8
1.2932.7
1.5639.7
_ _1GL9-x-LK 10.23.4888.3
376.2
3.4888.3
376.2
_ _1AL9-x-LK 23.33.2783.0
2.871.1
3.2783.0
2.871.1
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
_ _10GL9-x-LK 10.2 _ _10AL9-x-LK 23.0
80
2-3/42-7/8
2-15/163
3-1/83-3/16
444647485051
1405.511216M
3.5088.9
1GM1AM -- -- 11.75
298.58.25209.6
9.75247.7
125.4
6.88174.6
2.8873.0
25.8 7/8 1.4
35.61.2431.5
.7519
4.7120
2.2657.4
1.5138.4
1.594.4
_ _1GM9-x-LK 10.93.5088.8
2.8371.8
3.588.8
2.8371.8
_ _1AM9-x-LK 24.03.7093.9
376.9
3.793.9
3.0376.9
_ _BUMO-xZALUM6-x-LK_ _IUM9-x-LK_ _10GM9-x-LK 10.9 _ _10AM9-x-LK 24.0
90
2-3/42-15/163-1/43-7/163-1/2
4447525556
1606.299218O
4101.6
--1AO -- -- 14
355.61.3
261.611.63295.4
1.9449.3
8203.2 -- 2.22
56.4 7/8 -- 1.1128.2
.7519
4.1104.1
2.358.4
1.253.3
1.9549.5 -- -- 3.41
86.73.0677.6
3.4186.7
3.0677.7 _ _1AO9-x-LK 3.74
953.3986.0
3.7495
3.39886
_ _BUOO-xZALUO6-x-LK_ _IUO9-x-LK
*QuiKlean® adds .625” (5/8”) standoff
View A View B View C View D
Page 8 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
x = Shaft Sizemm∅
Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P T
UDoubleLock®
Sleeve
A B E
Tapped Base Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Housing p/n
Q R
V
Housing p/n
Q R
V Z
F K Polymer (KG) Stainless (SS) KG SSV1* V1* Z1*
mm in 16ths inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
Unc thread
inmm
inmm
inmm
inmm
inmm
inmm
inmm
Std Assembly Wtlbs
MA MB MC MD Std Assembly Wtlbs
MA MB MC MD
QK Assembly in in in in QK Assembly in in in in
12
15
17
1/29/165/8
11/16
891011
401.575203A
9GA3
76.21.1228.4
2.4662.5 9AA
376.2
1.1328.6
2.4661.1
1.3133.3 2
50.83/8 - 16 .56
14.2.5614.2
.4411.2
1.4938
1.0426.4
.6015.2
.7519.1
_ _9GA9-x-LK .61.6642.2
1.3734.9
1.6642.2
1.3734.9 _ _9AA9-x-LK 1.4 1.60
40.71.3133.3
1.6040.7
1.3133.3
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK9GA-QK 3.25
82.6 9AA-QK 3.0878.2
1.9449.2 _ _9GA-QK9-x-LK .7
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
9GB3.0778.0
1.1228.4
2.5866.7 9AB
376.2
1.1328.6
2.5864.3
1.3133.3
250.8
3/8 - 16 .5614.2
.5614.2
.5012.7
1.6341
1.1027.9
.6015.2
.9423.8
_ _9GB9-x-LK .81.7845.2
1.6141.0
1.7845.2
1.6141.0 _ _9AB9-x-LK 1.5 1.66
42.21.5038.1
1.6642.2
1.5038.1
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK9GB-QK 3.2
81.3 9AB-QK 3.281.3
1.9449.2 _ _9GB-QK9-x-LK .9
25
3/413/167/8
15/161
1213141516
522.047205C
9GC3
76.21.1428.9
2.9474.6 9AC
3.2582.5
1.1328.6
2.9474.6
1.4436.5 2
50.83/8 - 16 .56
14.2.5614.2
.5012.7
1.7544
1.1629.5
.6616.8
.9423.8
_ _9GC9-x-LK 1.01.9148.5
1.6842.8
1.9148.5
1.6842.8 _ _9AC9-x-LK 1.9 1.72
43.81.5038.1
1.7243.8
1.5038.1
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
9GC-QK 3.4590.5 9AC-QK 3.45
90.52.0652.4 _ _9GC-QK9-x-LK 1.1
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
9GD4.25108.0
1.6341.3
3.3885.7 9AD
4.25108.0
1.538.1
3.2582.5
1.6942.9 3
76.27/16 - 14 .81
20.6.7418.8
.5012.7
250
1.3032.9
.8020.2
.9925.1
_ _9GD9-x-LK 1.52.1755.1
1.8647.3
2.1755.1
1.8647.3 _ _9AD9-x-LK 3.3 2.03
51.61.7243.8
2.0351.6
1.7243.8
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
9GD-QK 4101.6 9AD-QK 4
101.62.3158.7 _ _9GD-QK9-x-LK 1.6
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
9GE4.5
114.31.7544.5
3.8898.4 9AE
4.5114.3
1.538.1
3.6993.7
1.5547.6 3.25
82.61/2 - 13 .88
22.4.7418.8
.5012.7
2.2557
1.4737.3
.9724.6
1.0025.4
_ _9GE9-x-LK 2.32.3459.5
1.8747.6
2.3459.5
1.8747.6
_ _9AE9-x-LK 4.4
5.0
2.2056.0
1.7344.0
2.2056.0
1.7344.0
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
9GE-QK 4.5114.3 9AE-QK 4.3
109.22.563.5 _ _9GE-QK9-x-LK 2.4 _ _9AE-QK9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
9GF4.75120.7
1.8847.6
4.13104.8 9AF
4.75120.7
1.6341.3
4.12104.8
1.9449.2 3.5
88.91/2 - 13 .93
23.6.81 20.6
.5012.7
2.3860
1.5138.3
1.0125.6
1.0927.8
_ _9GF9-x-LK 3.22.4762.8
2.0652.4
2.4762.8
2.0652.4 _ _9AF9-x-LK 5.7 2.31
58.81.9048.4
2.3158.8
1.9048.4
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK9GF-QK 4.75
120.6 9AF-QK 4.75120.6
2.5665.1 _ _9GF-QK9-x-LK 3.4
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
9GG 5.25133.4
250.8
4.38111.1 9AG 5.25
133.41.7544.5
4.25108.0
2.1254.0
3.7595.3
1/2 - 13 .9824.9
.8621.8
.6315.9
2.7570
1.6943
1.0727.2
1.2231.0 _ _9GG9-x-LK 3.8 2.69
68.42.2156.3
2.6968.4
2.2156.3 _ _9AG9-x-LK 6.8 2.55
64.82.0752.8
2.5564.8
2.0752.8
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
9GH 5.75146.1
2.1254
4.75120.7 9AH 5.75
146.12
50.84.5
114.32.2557.2
4101.6
5/8 - 11 1.128.0
.9825.0
.6315.9
376
1.6943
1.0727.2
1.2231.0 _ _9GH9-x-LK 4.4 2.94
74.72.4662.7
2.9474.7
2.4662.7 _ _9AH9-x-LK 8.8 2.67
68.02.2055.9
2.6768.0
2.2055.9
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
9GI 5.75146.1
5.75146.1
4.88123.8 9AI 5.75
146.12
50.84.72119.9
2.2557.2
4101.6
5/8 - 11 1.128.0
.9825.0
.6315.9
3.2583
1.8547.0
1.2231.1
1.2531.8 _ _9GI9-x-LK 3.03
77.12.4361.9
3.0377.1
2.4361.9 _ _9AI9-x-LK 2.83
72.02.2356.7
2.8372.0
2.2356.7
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
-- -- -- -- 9AJ 6.5165.1
250.8
5.38136.5
2.7569.9
4.25108.0
5/8 - 11 1.128.0
.9825.0
.6315.9
3.486
2.0652.4
1.4436.5
1.2832.5 -- -- 3.31
84.12.5364.2
3.3184.1
2.5364.2 _ _9AJ9-x-LK 11.5 3.04
77.42.2657.5
3.0477.4
2.2657.5
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
-- -- -- -- 9AK 7.5190.5
250.8
6.06154.0
376.2
5127.0
3/4 - 10 1.128.0
.9825.0
.7519.1
3.896
2.1053.3
1.3534.3
1.5038.1 -- -- 3.47
88.22.8773.0
3.4788.2
2.8773.0 _ _9AK9-x-LK 3.08
78.32.4863.1
3.0878.3
2.4863.1
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
-- -- -- -- 9AL 8203.2
250.8
6.75171.5
3.588.9
5.25133.4
7/8 - 91.128.0
.9825.0
.7519.1
4.13105
2.0451.8
1.2932.7
1.5639.7 -- -- 3.47
88.23
76.23.4788.2
376.2 _ _9AL9-x-LK 3.27
83.12.7971.0
3.2783.1
2.7971.0
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
Tapped Base Pillow BlockPolymer or Stainless “9” Series Tapped Block
Sample p/n 9AE-QK Sample p/n 9GE
*QuiKlean® adds .625” (5/8”) standoff
Standard QuiKlean®
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 9
x = Shaft Sizemm∅
Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P T
UDoubleLock®
Sleeve
A B E
Tapped Base Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Housing p/n
Q R
V
Housing p/n
Q R
V Z
F K Polymer (KG) Stainless (SS) KG SSV1* V1* Z1*
mm in 16ths inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
Unc thread
inmm
inmm
inmm
inmm
inmm
inmm
inmm
Std Assembly Wtlbs
MA MB MC MD Std Assembly Wtlbs
MA MB MC MD
QK Assembly in in in in QK Assembly in in in in
12
15
17
1/29/165/8
11/16
891011
401.575203A
9GA3
76.21.1228.4
2.4662.5 9AA
376.2
1.1328.6
2.4661.1
1.3133.3 2
50.83/8 - 16 .56
14.2.5614.2
.4411.2
1.4938
1.0426.4
.6015.2
.7519.1
_ _9GA9-x-LK .61.6642.2
1.3734.9
1.6642.2
1.3734.9 _ _9AA9-x-LK 1.4 1.60
40.71.3133.3
1.6040.7
1.3133.3
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK9GA-QK 3.25
82.6 9AA-QK 3.0878.2
1.9449.2 _ _9GA-QK9-x-LK .7
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
9GB3.0778.0
1.1228.4
2.5866.7 9AB
376.2
1.1328.6
2.5864.3
1.3133.3
250.8
3/8 - 16 .5614.2
.5614.2
.5012.7
1.6341
1.1027.9
.6015.2
.9423.8
_ _9GB9-x-LK .81.7845.2
1.6141.0
1.7845.2
1.6141.0 _ _9AB9-x-LK 1.5 1.66
42.21.5038.1
1.6642.2
1.5038.1
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK9GB-QK 3.2
81.3 9AB-QK 3.281.3
1.9449.2 _ _9GB-QK9-x-LK .9
25
3/413/167/8
15/161
1213141516
522.047205C
9GC3
76.21.1428.9
2.9474.6 9AC
3.2582.5
1.1328.6
2.9474.6
1.4436.5 2
50.83/8 - 16 .56
14.2.5614.2
.5012.7
1.7544
1.1629.5
.6616.8
.9423.8
_ _9GC9-x-LK 1.01.9148.5
1.6842.8
1.9148.5
1.6842.8 _ _9AC9-x-LK 1.9 1.72
43.81.5038.1
1.7243.8
1.5038.1
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
9GC-QK 3.4590.5 9AC-QK 3.45
90.52.0652.4 _ _9GC-QK9-x-LK 1.1
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
9GD4.25108.0
1.6341.3
3.3885.7 9AD
4.25108.0
1.538.1
3.2582.5
1.6942.9 3
76.27/16 - 14 .81
20.6.7418.8
.5012.7
250
1.3032.9
.8020.2
.9925.1
_ _9GD9-x-LK 1.52.1755.1
1.8647.3
2.1755.1
1.8647.3 _ _9AD9-x-LK 3.3 2.03
51.61.7243.8
2.0351.6
1.7243.8
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
9GD-QK 4101.6 9AD-QK 4
101.62.3158.7 _ _9GD-QK9-x-LK 1.6
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
9GE4.5
114.31.7544.5
3.8898.4 9AE
4.5114.3
1.538.1
3.6993.7
1.5547.6 3.25
82.61/2 - 13 .88
22.4.7418.8
.5012.7
2.2557
1.4737.3
.9724.6
1.0025.4
_ _9GE9-x-LK 2.32.3459.5
1.8747.6
2.3459.5
1.8747.6
_ _9AE9-x-LK 4.4
5.0
2.2056.0
1.7344.0
2.2056.0
1.7344.0
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
9GE-QK 4.5114.3 9AE-QK 4.3
109.22.563.5 _ _9GE-QK9-x-LK 2.4 _ _9AE-QK9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
9GF4.75120.7
1.8847.6
4.13104.8 9AF
4.75120.7
1.6341.3
4.12104.8
1.9449.2 3.5
88.91/2 - 13 .93
23.6.81 20.6
.5012.7
2.3860
1.5138.3
1.0125.6
1.0927.8
_ _9GF9-x-LK 3.22.4762.8
2.0652.4
2.4762.8
2.0652.4 _ _9AF9-x-LK 5.7 2.31
58.81.9048.4
2.3158.8
1.9048.4
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK9GF-QK 4.75
120.6 9AF-QK 4.75120.6
2.5665.1 _ _9GF-QK9-x-LK 3.4
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
9GG 5.25133.4
250.8
4.38111.1 9AG 5.25
133.41.7544.5
4.25108.0
2.1254.0
3.7595.3
1/2 - 13 .9824.9
.8621.8
.6315.9
2.7570
1.6943
1.0727.2
1.2231.0 _ _9GG9-x-LK 3.8 2.69
68.42.2156.3
2.6968.4
2.2156.3 _ _9AG9-x-LK 6.8 2.55
64.82.0752.8
2.5564.8
2.0752.8
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
9GH 5.75146.1
2.1254
4.75120.7 9AH 5.75
146.12
50.84.5
114.32.2557.2
4101.6
5/8 - 11 1.128.0
.9825.0
.6315.9
376
1.6943
1.0727.2
1.2231.0 _ _9GH9-x-LK 4.4 2.94
74.72.4662.7
2.9474.7
2.4662.7 _ _9AH9-x-LK 8.8 2.67
68.02.2055.9
2.6768.0
2.2055.9
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
9GI 5.75146.1
5.75146.1
4.88123.8 9AI 5.75
146.12
50.84.72119.9
2.2557.2
4101.6
5/8 - 11 1.128.0
.9825.0
.6315.9
3.2583
1.8547.0
1.2231.1
1.2531.8 _ _9GI9-x-LK 3.03
77.12.4361.9
3.0377.1
2.4361.9 _ _9AI9-x-LK 2.83
72.02.2356.7
2.8372.0
2.2356.7
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
-- -- -- -- 9AJ 6.5165.1
250.8
5.38136.5
2.7569.9
4.25108.0
5/8 - 11 1.128.0
.9825.0
.6315.9
3.486
2.0652.4
1.4436.5
1.2832.5 -- -- 3.31
84.12.5364.2
3.3184.1
2.5364.2 _ _9AJ9-x-LK 11.5 3.04
77.42.2657.5
3.0477.4
2.2657.5
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
-- -- -- -- 9AK 7.5190.5
250.8
6.06154.0
376.2
5127.0
3/4 - 10 1.128.0
.9825.0
.7519.1
3.896
2.1053.3
1.3534.3
1.5038.1 -- -- 3.47
88.22.8773.0
3.4788.2
2.8773.0 _ _9AK9-x-LK 3.08
78.32.4863.1
3.0878.3
2.4863.1
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
-- -- -- -- 9AL 8203.2
250.8
6.75171.5
3.588.9
5.25133.4
7/8 - 91.128.0
.9825.0
.7519.1
4.13105
2.0451.8
1.2932.7
1.5639.7 -- -- 3.47
88.23
76.23.4788.2
376.2 _ _9AL9-x-LK 3.27
83.12.7971.0
3.2783.1
2.7971.0
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
All-Round® Solution® Tapped Base Pillow Block“9” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QF9AC9-1-LK
Sample p/n QB9GC9-1-LK
*QuiKlean® adds .625” (5/8”) standoff
View A View B View C View D
Page 10 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
x = Shaft Sizemm∅
Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P V T
G R N DoubleLock®
Sleeve
U A B E
2-Bolt Flange Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Housing p/n
Q
Housing p/n
Q G1* R1* N1* F K Polymer (KG) Stainless (SS)
mm in 16thsin
mmin
mmin
mmin
mm Bolt sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
Std AssemblyWtlbs
MA* MB* MC MD Std AssemblyWtlbs
MA* MB* MC MD
QK Assembly in in in in QK Assembly in in in in
12
15
17
1/29/165/8
11/16
891011
401.575203A
2GA2.1554.6
2AA2.1554.6
376.2
3.8898.4 3/8
.5313.4
.8524.1
.4411.1
.4411.2
1.4938
.5313.5
1.0426.4
.6015.2
.7519.1
_ _2GA9-x-LK .51.5639.8
1.2832.5
1.3534.5
1.0727.2 _ _2AA9-x-LK .9 1.56
39.81.2832.5
1.3534.5
1.0727.2
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK
2GA-QK 2AA-QK 1.1529.3
1.4837.6
1.0627.1 _ _2GA-QK9-LK .6
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
2GB2.6968.3
2AB2.4261.5
3.5389.7
4.41112 3/8
.5915
.9524.1
.4411.1
.5012.7
1.6341
.6015.2
1.1027.9
.6015.2
.9423.8
_ _2GB9-x-LK .71.6943.0
1.5338.9
1.4536.9
1.2932.8 _ _2AB9-x-LK 1.2 1.69
43.01.5338.9
1.4536.9
1.2932.8
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
2GB-QK 2AB-QK 1.2230.8
1.5639.7
1.0626.9 _ _2GB-QK9-x-LK .8
25
3/413/167/8
15/161
1213141516
522.047205C
2GC2.9474.6
2AC2.6667.5
3.8998.8
4.89124.2 7/16
.6316
125.4
.5012.7
.5012.7
1.7544
.6416.3
1.1629.5
.6616.8
.9423.8
_ _2GC9-x-LK .91.7945.6
1.5739.9
1.5138.5
1.2932.8
_ _2AC9-x-LK 1.71.7945.6
1.5739.9
1.4938.0
1.2732.3
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
2GC-QK 2AC-QK 1.263.19
1.6241.2
1.1228.6 _ _2GC-QK9-x-LK 1.0 _ _2AC-QK9-x-LK 2.1
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
2GD3.6392.1
2AD3.1279.4
4.6116.7
5.69142.1 7/16
.6616.7
1.0627.0
.5012.7
.5012.7
250
.6616.8
1.3032.9
.8020.2
.9925.1
_ _2GD9-x-LK 1.41.9549.6
1.6441.8
1.7043.3
1.3935.5 _ _2AD9-x-LK 2.6 1.95
49.61.6441.8
1.7043.3
1.3935.5
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
2GD-QK 2AD-QK 1.2932.6
1.6842.8
1.1228.6 _ _2GD-QK9-x-LK 1.5
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
2GE4
101.6
2AE3.6292.1
5.12130.2
6.25158.7 1/2
.7920.1
1.2231.0
.5614.3
.5012.7
2.2557
.8020.3
1.4737.3
.9724.6
1.0025.4
_ _2GE9-x-LK 2.12.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _2AE9-x-LK 3.72.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
2GE-QK 2AE-QK 1.4235.9
1.8446.8
1.1830.2 _ _2GE-QK9-x-LK 2.2 _ _2AE-QK9-x-LK 4.0
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
2GF4.56115.9
2AF4
101.65.66143.7
6.78172.2 1/2
.7619.3
1.2427.4
.5614.3
.5012.7
2.3860
.8020.3
1.5138.3
1.0125.6
1.0927.8
_ _2GF9-x-LK 3.12.2757.7
1.8647.2
1.9750.2
1.5639.7 _ _2AF9-x-LK 5.0 2.27
57.71.8647.2
1.9750.2
1.5639.7
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
2GF-QK 2AF-QK 1.3935.1
1.6842.8
1.1830.2 _ _2GF-QK9-x-LK 3.3
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
2GG 4.75120.7 2AG 4.25
108.05.84148.4
6.97177.0 1/2 .76
19.31.2427.4
.6315.9
.6315.9
2.7570
.7819.8
1.6943
1.0727.2
1.2231 _ _2GG9-x-LK 3.6 2.45
62.31.9850.3
2.1755.1
1.6943.1 _ _2AG9-x-LK 5.9 2.45
62.31.9850.3
2.1755.1
1.6943.1
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
2GH 5.06128.6 2AH 4.56
115.96.19157.2
7.31185.7 1/2 .77
19.61.2427.4
.6315.9
.6315.9
376
.7819.8
1.6943.0
1.0727.2
1.2231 _ _2GH9-x-LK 4.0 2.46
62.51.9850.5
2.1654.9
1.6842.9 _ _2AH9-x-LK 6.5 2.46
62.51.9850.5
2.1654.9
1.6842.9
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211
I
2GI 5.88149.2 2AI 5.06
128.67.25184.2
8.63219.1 5/8 .92
23.41.4737.3
.6917.5
.6315.9
3.2583
.9323.6
1.8547.0
1.2231.1
1.2531.8 _ _2GI9-x-LK 5.6 2.77
70.42.1755.2
2.3960.9
1.7945.6 _ _2AI9-x-LK 9.3 2.77
70.42.1755.2
2.3960.9
1.7945.6
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
2GJ 6.56161.9 2AJ 5.62
142.97.95202.0
9.33236.9 5/8 1.07
27.21.6542.1
.6917.5
.6315.9
3.486
1.127.9
2.0652.4
1.4436.5
1.2832.5 _ _2GJ9-x-LK 6.8 3.13
79.52.3459.6
2.6567.4
1.8747.5 _ _2AJ9-x-LK 3.13
79.52.3459.6
2.6567.4
1.8747.5
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
2GK 6.94176.2 2AK 6.44
163.58.31211.1
9.69246.1 5/8 1.25
31.81.8747.6
.7519.1
.7519.1
3.896
1.2431.5
2.1053.3
1.3534.3
1.5038.1 _ _2GK9-x-LK 3.35
85.02.7569.8
2.7168.8
2.1153.5 _ _2AK9-x-LK 10.6 3.35
85.02.7569.8
2.7168.8
2.1153.5
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
2GL 6.94176.2 2AL 6.5
165.18.5
215.910.13257.2 3/4 1.38
35.12
50.81
25.4.7519.1
4.13105
1.3835.0
2.0451.8
1.2932.7
1.5639.7 _ _2GL9-x-LK 9.1 3.42
86.92.9474.8
2.6366.8
2.1554.7 _ _2AL9-x-LK 3.42
86.92.9474.8
2.6366.8
2.1554.7
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
2-Bolt FlangePolymer or Stainless “2” Series Flange Housing
Sample p/n 2GC Sample p/n 2AE *QuiKlean® adds .625” (5/8”) standoff & LTB Poly-Round® Standard QuiKlean®
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 11
x = Shaft Sizemm∅
Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P V T
G R N DoubleLock®
Sleeve
U A B E
2-Bolt Flange Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Housing p/n
Q
Housing p/n
Q G1* R1* N1* F K Polymer (KG) Stainless (SS)
mm in 16thsin
mmin
mmin
mmin
mm Bolt sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
Std AssemblyWtlbs
MA* MB* MC MD Std AssemblyWtlbs
MA* MB* MC MD
QK Assembly in in in in QK Assembly in in in in
12
15
17
1/29/165/8
11/16
891011
401.575203A
2GA2.1554.6
2AA2.1554.6
376.2
3.8898.4 3/8
.5313.4
.8524.1
.4411.1
.4411.2
1.4938
.5313.5
1.0426.4
.6015.2
.7519.1
_ _2GA9-x-LK .51.5639.8
1.2832.5
1.3534.5
1.0727.2 _ _2AA9-x-LK .9 1.56
39.81.2832.5
1.3534.5
1.0727.2
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK
2GA-QK 2AA-QK 1.1529.3
1.4837.6
1.0627.1 _ _2GA-QK9-LK .6
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
2GB2.6968.3
2AB2.4261.5
3.5389.7
4.41112 3/8
.5915
.9524.1
.4411.1
.5012.7
1.6341
.6015.2
1.1027.9
.6015.2
.9423.8
_ _2GB9-x-LK .71.6943.0
1.5338.9
1.4536.9
1.2932.8 _ _2AB9-x-LK 1.2 1.69
43.01.5338.9
1.4536.9
1.2932.8
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
2GB-QK 2AB-QK 1.2230.8
1.5639.7
1.0626.9 _ _2GB-QK9-x-LK .8
25
3/413/167/8
15/161
1213141516
522.047205C
2GC2.9474.6
2AC2.6667.5
3.8998.8
4.89124.2 7/16
.6316
125.4
.5012.7
.5012.7
1.7544
.6416.3
1.1629.5
.6616.8
.9423.8
_ _2GC9-x-LK .91.7945.6
1.5739.9
1.5138.5
1.2932.8
_ _2AC9-x-LK 1.71.7945.6
1.5739.9
1.4938.0
1.2732.3
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
2GC-QK 2AC-QK 1.263.19
1.6241.2
1.1228.6 _ _2GC-QK9-x-LK 1.0 _ _2AC-QK9-x-LK 2.1
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
2GD3.6392.1
2AD3.1279.4
4.6116.7
5.69142.1 7/16
.6616.7
1.0627.0
.5012.7
.5012.7
250
.6616.8
1.3032.9
.8020.2
.9925.1
_ _2GD9-x-LK 1.41.9549.6
1.6441.8
1.7043.3
1.3935.5 _ _2AD9-x-LK 2.6 1.95
49.61.6441.8
1.7043.3
1.3935.5
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
2GD-QK 2AD-QK 1.2932.6
1.6842.8
1.1228.6 _ _2GD-QK9-x-LK 1.5
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
2GE4
101.6
2AE3.6292.1
5.12130.2
6.25158.7 1/2
.7920.1
1.2231.0
.5614.3
.5012.7
2.2557
.8020.3
1.4737.3
.9724.6
1.0025.4
_ _2GE9-x-LK 2.12.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _2AE9-x-LK 3.72.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
2GE-QK 2AE-QK 1.4235.9
1.8446.8
1.1830.2 _ _2GE-QK9-x-LK 2.2 _ _2AE-QK9-x-LK 4.0
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
2GF4.56115.9
2AF4
101.65.66143.7
6.78172.2 1/2
.7619.3
1.2427.4
.5614.3
.5012.7
2.3860
.8020.3
1.5138.3
1.0125.6
1.0927.8
_ _2GF9-x-LK 3.12.2757.7
1.8647.2
1.9750.2
1.5639.7 _ _2AF9-x-LK 5.0 2.27
57.71.8647.2
1.9750.2
1.5639.7
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
2GF-QK 2AF-QK 1.3935.1
1.6842.8
1.1830.2 _ _2GF-QK9-x-LK 3.3
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
2GG 4.75120.7 2AG 4.25
108.05.84148.4
6.97177.0 1/2 .76
19.31.2427.4
.6315.9
.6315.9
2.7570
.7819.8
1.6943
1.0727.2
1.2231 _ _2GG9-x-LK 3.6 2.45
62.31.9850.3
2.1755.1
1.6943.1 _ _2AG9-x-LK 5.9 2.45
62.31.9850.3
2.1755.1
1.6943.1
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
2GH 5.06128.6 2AH 4.56
115.96.19157.2
7.31185.7 1/2 .77
19.61.2427.4
.6315.9
.6315.9
376
.7819.8
1.6943.0
1.0727.2
1.2231 _ _2GH9-x-LK 4.0 2.46
62.51.9850.5
2.1654.9
1.6842.9 _ _2AH9-x-LK 6.5 2.46
62.51.9850.5
2.1654.9
1.6842.9
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211
I
2GI 5.88149.2 2AI 5.06
128.67.25184.2
8.63219.1 5/8 .92
23.41.4737.3
.6917.5
.6315.9
3.2583
.9323.6
1.8547.0
1.2231.1
1.2531.8 _ _2GI9-x-LK 5.6 2.77
70.42.1755.2
2.3960.9
1.7945.6 _ _2AI9-x-LK 9.3 2.77
70.42.1755.2
2.3960.9
1.7945.6
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
2GJ 6.56161.9 2AJ 5.62
142.97.95202.0
9.33236.9 5/8 1.07
27.21.6542.1
.6917.5
.6315.9
3.486
1.127.9
2.0652.4
1.4436.5
1.2832.5 _ _2GJ9-x-LK 6.8 3.13
79.52.3459.6
2.6567.4
1.8747.5 _ _2AJ9-x-LK 3.13
79.52.3459.6
2.6567.4
1.8747.5
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
2GK 6.94176.2 2AK 6.44
163.58.31211.1
9.69246.1 5/8 1.25
31.81.8747.6
.7519.1
.7519.1
3.896
1.2431.5
2.1053.3
1.3534.3
1.5038.1 _ _2GK9-x-LK 3.35
85.02.7569.8
2.7168.8
2.1153.5 _ _2AK9-x-LK 10.6 3.35
85.02.7569.8
2.7168.8
2.1153.5
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
2GL 6.94176.2 2AL 6.5
165.18.5
215.910.13257.2 3/4 1.38
35.12
50.81
25.4.7519.1
4.13105
1.3835.0
2.0451.8
1.2932.7
1.5639.7 _ _2GL9-x-LK 9.1 3.42
86.92.9474.8
2.6366.8
2.1554.7 _ _2AL9-x-LK 3.42
86.92.9474.8
2.6366.8
2.1554.7
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
All-Round® Solution® 2-Bolt Flange“2” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QF2GC9-1-LKSample p/n QB2AE9-23-LK
*QuiKlean® adds .625” (5/8”) standoff & LTB
View A View B View C View D
Page 12 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Standard QuiKlean®
Small Pattern 2-Bolt FlangePolymer or Stainless “6” Series Small Pattern 2-Bolt Housing
Sample p/n 6GB Sample p/n 6AB
Round bolt holes are standard.
*Square bolt holes are available. If required, please call for price and lead time.
Square bolt holes designated with ‘Q’ i.e. 6GB-Q or _ _ 6AB-Q9-x-LK
x = Shaft Sizemm∅
Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P V T
R N UDoubleLock®
Sleeve
U A B E
Small Pattern 2-Bolt Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Housing p/n
Q
Housing p/n
Q R1* N1* U1* F K Polymer (KG) Stainless (SS)
mm in 16thsin
mmin
mmin
mmin
mm Bolt sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
Std AssemblyWtlbs
MA* MB* MC MD Std AssemblyWtlbs
MA* MB* MC MD
QK Assembly in in in in QK Assembly in in in in12
15
17
1/29/165/8
11/16
891011
401.575203A
6GA 2-3/3253.2 6AA 2.09
53.22.563.5
3.1881.0 1/4 .69
17.5.389.5
.4611.7
.4411.2
1.4938
.5714.5
1.0426.4
.6015.2
.7519.1 _ _6GA9-x-LK .5 1.46
37.11.1729.8
1.3133.4
1.0226.1 _ _6AA9-x-LK .8 1.46
37.11.1729.8
1.3133.4
1.0226.1
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
6GB 2-13/3261.4 6AB 2.42
61.42.8171.4
3.5690.5 5/16 .87
22.2.4210.7
.5012.7
.5012.7
1.6341
.6717.0
1.1027.9
.6015.2
.9423.8 _ _6GB9-x-LK .6 1.6
40.61.4336.5
1.4536.9
1.2932.8 _ _6AB9-x-LK 1.0 1.6
40.61.4336.5
1.4536.9
1.2932.8
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
6GC 2-23/3269.1 6AC 2.72
69.13
76.23.7595.2 5/16 .81
20.6.4210.7
.4611.7
.5012.7
1.7544
.7118.0
1.1629.5
.6616.8
.9423.8 _ _6GC9-x-LK .8 1.62
41.11.3935.4
1.5138.5
1.2932.8 _ _6AC9-x-LK 1.4 1.66
42.21.4336.5
1.4737.4
1.2531.7
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
6GD 3-3/3278.6 6AD 3.09
78.63.5690.5
4.43112.7 3/8 .96
24.6.4611.9
.5614.2
.5012.7
250
.7819.8
1.3032.9
.8020.2
.9925.1 _ _6GD9-x-LK 1.3 1.86
47.21.5539.4
1.6942.9
1.3835.1 _ _6AD9-x-LK 2.8 1.86
47.21.5539.4
1.6942.9
1.3835.1
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
6GE3-1/288.9
6AE3.5088.9
3.94100.0
4.74125.4 3/8
.8421
.5012.7
.5614.3 .50
12.72.2557
.9323.6
1.4737.3
.9724.6
125.4
_ _6GE9-x-LK1.9 2.03
51.61.5639.7
1.8647.3
1.3935.4
_ _6AE9-x-LK2.8 2.03
51.61.5639.7
1.8647.3
1.3935.4
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK6GE-QK 6AE-QK 1.5
38.11.1228.5
1.1830.2 _ _6GE-QK9-x-LK _ _6AE-QK9-x-LK
*QuiKlean® adds .625” (5/8”) standoff & LTB
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 13
x = Shaft Sizemm∅
Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P V T
R N UDoubleLock®
Sleeve
U A B E
Small Pattern 2-Bolt Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Housing p/n
Q
Housing p/n
Q R1* N1* U1* F K Polymer (KG) Stainless (SS)
mm in 16thsin
mmin
mmin
mmin
mm Bolt sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
Std AssemblyWtlbs
MA* MB* MC MD Std AssemblyWtlbs
MA* MB* MC MD
QK Assembly in in in in QK Assembly in in in in12
15
17
1/29/165/8
11/16
891011
401.575203A
6GA 2-3/3253.2 6AA 2.09
53.22.563.5
3.1881.0 1/4 .69
17.5.389.5
.4611.7
.4411.2
1.4938
.5714.5
1.0426.4
.6015.2
.7519.1 _ _6GA9-x-LK .5 1.46
37.11.1729.8
1.3133.4
1.0226.1 _ _6AA9-x-LK .8 1.46
37.11.1729.8
1.3133.4
1.0226.1
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
6GB 2-13/3261.4 6AB 2.42
61.42.8171.4
3.5690.5 5/16 .87
22.2.4210.7
.5012.7
.5012.7
1.6341
.6717.0
1.1027.9
.6015.2
.9423.8 _ _6GB9-x-LK .6 1.6
40.61.4336.5
1.4536.9
1.2932.8 _ _6AB9-x-LK 1.0 1.6
40.61.4336.5
1.4536.9
1.2932.8
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
6GC 2-23/3269.1 6AC 2.72
69.13
76.23.7595.2 5/16 .81
20.6.4210.7
.4611.7
.5012.7
1.7544
.7118.0
1.1629.5
.6616.8
.9423.8 _ _6GC9-x-LK .8 1.62
41.11.3935.4
1.5138.5
1.2932.8 _ _6AC9-x-LK 1.4 1.66
42.21.4336.5
1.4737.4
1.2531.7
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
6GD 3-3/3278.6 6AD 3.09
78.63.5690.5
4.43112.7 3/8 .96
24.6.4611.9
.5614.2
.5012.7
250
.7819.8
1.3032.9
.8020.2
.9925.1 _ _6GD9-x-LK 1.3 1.86
47.21.5539.4
1.6942.9
1.3835.1 _ _6AD9-x-LK 2.8 1.86
47.21.5539.4
1.6942.9
1.3835.1
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
6GE3-1/288.9
6AE3.5088.9
3.94100.0
4.74125.4 3/8
.8421
.5012.7
.5614.3 .50
12.72.2557
.9323.6
1.4737.3
.9724.6
125.4
_ _6GE9-x-LK1.9 2.03
51.61.5639.7
1.8647.3
1.3935.4
_ _6AE9-x-LK2.8 2.03
51.61.5639.7
1.8647.3
1.3935.4
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK6GE-QK 6AE-QK 1.5
38.11.1228.5
1.1830.2 _ _6GE-QK9-x-LK _ _6AE-QK9-x-LK
All-Round® Solution® Small Pattern 2-Bolt Flange“6” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QB6GC9-1-LKSample p/n QB6AB9-3/4-LK
*QuiKlean® adds .625” (5/8”) standoff & LTB
View A View B View C View D
Page 14 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
x = Shaft Sizemm∅
Inch∅Ring
Group
Polymer (KG) Stainless (SS)
W V P T
G R NDoubleLock®
Sleeve
U A B E
4-Bolt AssemblyPolymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly Housing
p/n
Q
Housing p/n
QG1* R1* N1*
F K Polymer (KG) Stainless (SS)
mm in 16thsin
mmin
mmin
mmin
mmin
mm Bolt sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
Std Assembly Wtlbs
MA* MB* MC MD Std Assembly Wtlbs
MA* MB* MC MD
QK Assembly in in in in QK Assembly in in in in12
15
17
1/29/165/8
11/16
891011
401.575203A
4GA2.1554.6
4AA2.1554.6
2.1254.0
376.2
376.2 3/8
.5313.5
.8521.4
.4311.1 .44
11.21.4938
.5313.5
1.0426.4
.6015.2
.7519.1
_ _4GA9-x-LK .61.5639.8
1.2832.5
1.3534.5
1.0727.2
_ _4AA9-x-LK 1.21.5639.8
1.2832.5
1.3534.5
1.0727.2
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK4GA-QK -- 1.15
29.21.4437.4
1.0627 _ _4GA-QK9-x-LK .7 _ _4AA-QK9-x-LK 1.6
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
4GB2.6868.1
4AB2.4261.5
2.563.5
3.3785.7
3.5489.9 3/8
.5915.1
.8423.8
.4411.1 .50
12.71.6341
.6015.2
1.1027.9
.6015.2
.9423.8
_ _4GB9-x-LK .81.6943.0
1.5338.9
1.4536.9
1.2932.8
_ _4AB9-x-LK 2.01.6943.0
1.5338.9
1.4536.9
1.2932.8
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
4GB-QK 4AB-QK 1.2230.6
1.5739.9
1.06 26.9 _ _4GB-QK9-x-LK .9 _ _4AB-QK9-x-LK 2.4
25
3/413/167/8
15/161
1213141516
522.047205C
4GC2.9374.4
4AC2.6667.6
2.7569.9
3.7595.3
3.8998.8 7/16
.6316.7
125.4
.512.7 .50
12.71.7544
.6416.3
1.1629.5
.6616.8
.9423.8
_ _4GC9-x-LK 1.11.7945.6
1.5739.9
1.5138.5
1.2932.8
_ _4AC9-x-LK 2.41.7945.6
1.5739.9
1.4938.0
1.2732.3
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK4GC-QK 4AC-QK 1.26
321.6341.4
1.1228.4 _ _4GC-QK9-x-LK 1.2 _ _4AC-QK9-x-LK 2.9
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
4GD3.6291.9
4AD3.1279.2
3.2582.6
4.25108.0
4.59116.6 7/16
.6616.7
1.0727.0
.512.7 .50
12.72.050
.6616.8
1.3032.9
.8020.2
.9925.1
_ _4GD9-x-LK 1.61.9549.6
1.6441.8
1.7043.3
1.3935.5
_ _4AD9-x-LK 3.31.9549.6
1.6441.8
1.7043.3
1.3935.5
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
4GD-QK 4AD-QK 1.2832
1.6942.9
1.1228.4 _ _4GD-QK9-x-LK 1.7 _ _4AD-QK9-x-LK 3.8
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
4GE4.0
101.6
4AE3.6291.9
3.6292.1
4.75120.7
5.13130.3 1/2
.7920.1
1.2231.0
.5614.3
.5012.7
2.2557
.8020.3
1.4737.3
.9724.6
125.4
_ _4GE9-x-LK 2.32.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _4AE9-x-LK 4.92.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK4GE-QK 4AE-QK 1.42
361.8547
1.1930.2 _ _4GE-QK9-x-LK 2.4 _ _4AE-QK9-x-LK 5.5
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
4GF4.56115.8
4AF4
101.64
101.65.12130.2
5.66143.7 1/2
.7719.5
1.2431.8
.5614.3 .50
12.72.3860
.8020.3
1.5138.3
1.0125.6
1.0927.8
_ _4GF9-x-LK 3.12.2757.7
1.8647.2
1.9750.2
1.5639.7
_ _4AF9-x-LK 6.72.2757.7
1.8647.2
1.9750.2
1.5639.7
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK4GF-QK 4AF-QK 1.39
35.41.8647.2
1.1830 _ _4GF-QK9-x-LK 3.3 _ _4AF-QK9-x-LK 7.3
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
4GG 4.74120.4 4AG 4.25
108.04.12104.8
5.25133.4
5.83148.0 1/2 .76
19.51.2431.8
.6215.9
.6315.9
2.7570
.7819.8
1.6943
1.0727.2
1.2231 _ _4GG9-x-LK 3.8 2.45
62.31.9850.3
2.1755.1
1.6943.1 _ _4AG9-x-LK 7.5 2.45
62.31.9850.3
2.1755.1
1.6943.1
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
4GH 5.06128.5 4AH 4.56
115.84.37111.1
5.5139.7
6.19157.2 1/2 .77
19.61.2431.8
.6215.9
.6315.9
376
.7819.8
1.6943
1.0727.2
1.2231 _ _4GH9-x-LK 4.2 2.46
62.51.9850.5
2.1654.9
1.6842.9 _ _4AH9-x-LK 7.8 2.46
62.51.9850.5
2.1654.9
1.6842.9
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
4GI 5.87149.1 4AI 5.06
128.55.12130.2
6.5165.1
7.25184.2 5/8 .92
23.51.4737.3
.6917.5
.6315.9
3.2583
.9323.6
1.8547
1.2231.1
1.2531.8 _ _4GI9-x-LK 6.0 2.77
70.42.1755.2
2.3960.9
1.7945.6 _ _4AI9-x-LK 13.0 2.77
70.42.1755.2
2.3960.9
1.7945.6
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
4GJ 6.56166.6 4AJ 5.62
142.75.62142.9
7177.8
7.96202.8 5/8 1.07
27.11.6642.1
.6917.5
.6315.9
3.486
1.127.9
2.0652.4
1.4436.5
1.2832.5 _ _4GJ9-x-LK 7.2 3.13
79.52.3459.6
2.6567.4
1.8747.5 _ _4AJ9-x-LK 16.4 3.13
79.52.3459.6
2.6567.4
1.8747.5
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
4GK 6.94176.3 4AK 6.44
163.65.87149.2
7.25184.2
8.31211 5/8 1.25
31.81.8647.6
.7519.1
.7519.1
3.896
1.2431.5
2.1053.3
1.3534.3
1.5038.1 _ _4GK9-x-LK 9.2 3.35
85.02.7569.8
2.7168.8
2.1153.5 _ _4AK9-x-LK 19.3 3.35
85.02.7569.8
2.7168.8
2.1153.5
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
4GL 6.94176.3 4AL 6.5
165.16
152.47.62193.7
8.49215.6 3/4 1.38
35.21.9850.8
125.4
.7519.1
4.13105
1.3835.0
2.0451.8
1.2932.7
1.5639.7 _ _4GL9-x-LK 9.9 3.42
86.92.9474.8
2.6366.8
2.1554.7 _ _4AL9-x-LK 22.0 3.42
86.92.9474.8
2.6366.8
2.1554.7
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
80
2-3/42-7/8
2-15/163
3-1/83-3/16
444647485051
1405.511216M
4GM 6.94176.3 4AM 6.5
165.16
152.47.62193.7
8.49215.6 3/4 1.38
35.71.9850.8
125.4
.7519.1
4.5114.3
1.3935.3
2.2657.4
1.5138.4
1.5940.4 _ _4GM9-x-LK 3.62
92.02.9575.0
2.8773.0
2.2056.0 _ _4AM9-x-LK 21.8 3.64
92.62.9775.5
2.8572.4
2.1855.4
_ _BUMO-xZALUM6-x-LK_ _IUM9-x-LK
90
2-3/42-15/163-1/43-7/163-1/2
4447525556
1606.299218O
-- -- 4AO 7.75196.9
6152.4
7.62193.7
8.49215.6 3/4 1.38
35.21.9850.8
125.4
.7519.1
4.1104.1
1.2531.8
2.2657.4
1.5138.4
1.5940.4 -- -- 3.55
90.22
50.83.0377.0
1.4837.5 _ _4AO9-x-LK 3.55
90.22
50.83.0377.0
1.4837.5
_ _BUOO-xZALUO6-x-LK_ _IUO9-x-LK
4-Bolt FlangePolymer or Stainless “4” Series 4-Bolt Flange Housing
Sample p/n 4AESample p/n 4GE-QK Sample p/n 4AG-SPLIT
*QuiKlean® adds .625” (5/8”) standoff & LTB
Standard QuiKlean®
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 15
x = Shaft Sizemm∅
Inch∅Ring
Group
Polymer (KG) Stainless (SS)
W V P T
G R NDoubleLock®
Sleeve
U A B E
4-Bolt AssemblyPolymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly Housing
p/n
Q
Housing p/n
QG1* R1* N1*
F K Polymer (KG) Stainless (SS)
mm in 16thsin
mmin
mmin
mmin
mmin
mm Bolt sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
Std Assembly Wtlbs
MA* MB* MC MD Std Assembly Wtlbs
MA* MB* MC MD
QK Assembly in in in in QK Assembly in in in in12
15
17
1/29/165/8
11/16
891011
401.575203A
4GA2.1554.6
4AA2.1554.6
2.1254.0
376.2
376.2 3/8
.5313.5
.8521.4
.4311.1 .44
11.21.4938
.5313.5
1.0426.4
.6015.2
.7519.1
_ _4GA9-x-LK .61.5639.8
1.2832.5
1.3534.5
1.0727.2
_ _4AA9-x-LK 1.21.5639.8
1.2832.5
1.3534.5
1.0727.2
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK4GA-QK -- 1.15
29.21.4437.4
1.0627 _ _4GA-QK9-x-LK .7 _ _4AA-QK9-x-LK 1.6
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
4GB2.6868.1
4AB2.4261.5
2.563.5
3.3785.7
3.5489.9 3/8
.5915.1
.8423.8
.4411.1 .50
12.71.6341
.6015.2
1.1027.9
.6015.2
.9423.8
_ _4GB9-x-LK .81.6943.0
1.5338.9
1.4536.9
1.2932.8
_ _4AB9-x-LK 2.01.6943.0
1.5338.9
1.4536.9
1.2932.8
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
4GB-QK 4AB-QK 1.2230.6
1.5739.9
1.06 26.9 _ _4GB-QK9-x-LK .9 _ _4AB-QK9-x-LK 2.4
25
3/413/167/8
15/161
1213141516
522.047205C
4GC2.9374.4
4AC2.6667.6
2.7569.9
3.7595.3
3.8998.8 7/16
.6316.7
125.4
.512.7 .50
12.71.7544
.6416.3
1.1629.5
.6616.8
.9423.8
_ _4GC9-x-LK 1.11.7945.6
1.5739.9
1.5138.5
1.2932.8
_ _4AC9-x-LK 2.41.7945.6
1.5739.9
1.4938.0
1.2732.3
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK4GC-QK 4AC-QK 1.26
321.6341.4
1.1228.4 _ _4GC-QK9-x-LK 1.2 _ _4AC-QK9-x-LK 2.9
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
4GD3.6291.9
4AD3.1279.2
3.2582.6
4.25108.0
4.59116.6 7/16
.6616.7
1.0727.0
.512.7 .50
12.72.050
.6616.8
1.3032.9
.8020.2
.9925.1
_ _4GD9-x-LK 1.61.9549.6
1.6441.8
1.7043.3
1.3935.5
_ _4AD9-x-LK 3.31.9549.6
1.6441.8
1.7043.3
1.3935.5
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
4GD-QK 4AD-QK 1.2832
1.6942.9
1.1228.4 _ _4GD-QK9-x-LK 1.7 _ _4AD-QK9-x-LK 3.8
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
4GE4.0
101.6
4AE3.6291.9
3.6292.1
4.75120.7
5.13130.3 1/2
.7920.1
1.2231.0
.5614.3
.5012.7
2.2557
.8020.3
1.4737.3
.9724.6
125.4
_ _4GE9-x-LK 2.32.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _4AE9-x-LK 4.92.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK4GE-QK 4AE-QK 1.42
361.8547
1.1930.2 _ _4GE-QK9-x-LK 2.4 _ _4AE-QK9-x-LK 5.5
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
4GF4.56115.8
4AF4
101.64
101.65.12130.2
5.66143.7 1/2
.7719.5
1.2431.8
.5614.3 .50
12.72.3860
.8020.3
1.5138.3
1.0125.6
1.0927.8
_ _4GF9-x-LK 3.12.2757.7
1.8647.2
1.9750.2
1.5639.7
_ _4AF9-x-LK 6.72.2757.7
1.8647.2
1.9750.2
1.5639.7
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK4GF-QK 4AF-QK 1.39
35.41.8647.2
1.1830 _ _4GF-QK9-x-LK 3.3 _ _4AF-QK9-x-LK 7.3
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
4GG 4.74120.4 4AG 4.25
108.04.12104.8
5.25133.4
5.83148.0 1/2 .76
19.51.2431.8
.6215.9
.6315.9
2.7570
.7819.8
1.6943
1.0727.2
1.2231 _ _4GG9-x-LK 3.8 2.45
62.31.9850.3
2.1755.1
1.6943.1 _ _4AG9-x-LK 7.5 2.45
62.31.9850.3
2.1755.1
1.6943.1
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
4GH 5.06128.5 4AH 4.56
115.84.37111.1
5.5139.7
6.19157.2 1/2 .77
19.61.2431.8
.6215.9
.6315.9
376
.7819.8
1.6943
1.0727.2
1.2231 _ _4GH9-x-LK 4.2 2.46
62.51.9850.5
2.1654.9
1.6842.9 _ _4AH9-x-LK 7.8 2.46
62.51.9850.5
2.1654.9
1.6842.9
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
4GI 5.87149.1 4AI 5.06
128.55.12130.2
6.5165.1
7.25184.2 5/8 .92
23.51.4737.3
.6917.5
.6315.9
3.2583
.9323.6
1.8547
1.2231.1
1.2531.8 _ _4GI9-x-LK 6.0 2.77
70.42.1755.2
2.3960.9
1.7945.6 _ _4AI9-x-LK 13.0 2.77
70.42.1755.2
2.3960.9
1.7945.6
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
4GJ 6.56166.6 4AJ 5.62
142.75.62142.9
7177.8
7.96202.8 5/8 1.07
27.11.6642.1
.6917.5
.6315.9
3.486
1.127.9
2.0652.4
1.4436.5
1.2832.5 _ _4GJ9-x-LK 7.2 3.13
79.52.3459.6
2.6567.4
1.8747.5 _ _4AJ9-x-LK 16.4 3.13
79.52.3459.6
2.6567.4
1.8747.5
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
4GK 6.94176.3 4AK 6.44
163.65.87149.2
7.25184.2
8.31211 5/8 1.25
31.81.8647.6
.7519.1
.7519.1
3.896
1.2431.5
2.1053.3
1.3534.3
1.5038.1 _ _4GK9-x-LK 9.2 3.35
85.02.7569.8
2.7168.8
2.1153.5 _ _4AK9-x-LK 19.3 3.35
85.02.7569.8
2.7168.8
2.1153.5
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
4GL 6.94176.3 4AL 6.5
165.16
152.47.62193.7
8.49215.6 3/4 1.38
35.21.9850.8
125.4
.7519.1
4.13105
1.3835.0
2.0451.8
1.2932.7
1.5639.7 _ _4GL9-x-LK 9.9 3.42
86.92.9474.8
2.6366.8
2.1554.7 _ _4AL9-x-LK 22.0 3.42
86.92.9474.8
2.6366.8
2.1554.7
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
80
2-3/42-7/8
2-15/163
3-1/83-3/16
444647485051
1405.511216M
4GM 6.94176.3 4AM 6.5
165.16
152.47.62193.7
8.49215.6 3/4 1.38
35.71.9850.8
125.4
.7519.1
4.5114.3
1.3935.3
2.2657.4
1.5138.4
1.5940.4 _ _4GM9-x-LK 3.62
92.02.9575.0
2.8773.0
2.2056.0 _ _4AM9-x-LK 21.8 3.64
92.62.9775.5
2.8572.4
2.1855.4
_ _BUMO-xZALUM6-x-LK_ _IUM9-x-LK
90
2-3/42-15/163-1/43-7/163-1/2
4447525556
1606.299218O
-- -- 4AO 7.75196.9
6152.4
7.62193.7
8.49215.6 3/4 1.38
35.21.9850.8
125.4
.7519.1
4.1104.1
1.2531.8
2.2657.4
1.5138.4
1.5940.4 -- -- 3.55
90.22
50.83.0377.0
1.4837.5 _ _4AO9-x-LK 3.55
90.22
50.83.0377.0
1.4837.5
_ _BUOO-xZALUO6-x-LK_ _IUO9-x-LK
All-Round® Solution® 4-Bolt Flange“4” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QB4AE9-2-LK Sample p/n QB4GE9-20-LK
*QuiKlean® adds .625” (5/8”) standoff & LTB
View A View B View C View D
Page 16 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
x = Shaft Sizemm∅
Inch∅Ring
Group
Polymer (KG)
Stainless (SS) W V P T
G R N DoubleLock® Sleeve
B U A E MA* MB*
Small Pattern 4-Bolt Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
G1* R1* N1* F K Polymer (KG) Stainless (SS)
mm in 16thsHousing
p/nHousing
p/nin
mmin
mmin
mm Bolt sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
Std Assembly (w/sleeve)Wtlbs
Std Assembly (w/sleeve)WtlbsQK Assembly (w/sleeve) QK Assembly (w/sleeve)
25
3/413/167/8
15/161
1213141516
522.047205C
4GC-01 4AC-012.2557.15
3.1379.4
5.06128.6 3/8
.6617.7
.9925.1
.256.4 .50
12.71.7544
0.6616.8
.7118.0
1.1629.5
0.9423.8
1.8446.7
1.6441.7
_ _4GC-019-x-LK .9 _ _4AC-019-x-LK 1.7 _ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
4GC-01-QK 4AC-01-QK 1.2932.8
1.6241.1
.8822.4 _ _4GC-01-QK9-x-LK 1.0 _ _4AC-01-QK9-x-LK 2.1
Small Pattern 4-BoltPolymer or Stainless 4-Bolt Flange “4^-01” Series Housing
Sample p/n 4AC-01 Sample p/n 4GC-01Sample p/n 4GC-01-QK
*QuiKlean® adds .625” (5/8”) standoff & LTB
Standard QuiKlean®
“Breader Bearing”Stainless “ZA100” QuiKlean® housing is exclusive to EDT
Specially designed to retrofit into most popular breading equipment
x = Shaft Size mm∅Inch∅Ring
Group
Stainless (SS) W V P T G R D MAb Breader Bearing Components
mm in 16thsHousing
p/nin
mmin
mmin
mm Bolt sizein
mmin
mmin
mmin
mm Bearing Backing Plate AssemblyWtlbs
25 3/41
1216
522.047205C
ZA100-QK 1.87 2.5 2.65 5/16 .93 1.28 .13 1.70 205-16-J PA100-1 ZJZA100-QK8-1 1.0
Sample p/n ZA100-QK
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 17
x = Shaft Sizemm∅
Inch∅Ring
Group
Polymer (KG)
Stainless (SS) W V P T
G R N DoubleLock® Sleeve
B U A E MA* MB*
Small Pattern 4-Bolt Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
G1* R1* N1* F K Polymer (KG) Stainless (SS)
mm in 16thsHousing
p/nHousing
p/nin
mmin
mmin
mm Bolt sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
Std Assembly (w/sleeve)Wtlbs
Std Assembly (w/sleeve)WtlbsQK Assembly (w/sleeve) QK Assembly (w/sleeve)
25
3/413/167/8
15/161
1213141516
522.047205C
4GC-01 4AC-012.2557.15
3.1379.4
5.06128.6 3/8
.6617.7
.9925.1
.256.4 .50
12.71.7544
0.6616.8
.7118.0
1.1629.5
0.9423.8
1.8446.7
1.6441.7
_ _4GC-019-x-LK .9 _ _4AC-019-x-LK 1.7 _ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
4GC-01-QK 4AC-01-QK 1.2932.8
1.6241.1
.8822.4 _ _4GC-01-QK9-x-LK 1.0 _ _4AC-01-QK9-x-LK 2.1
All-Round® Solution 4-Bolt4-Bolt Flange “4^-01” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QB4GC-019-1-LKSample p/n QB4AC-019-1-LK
*QuiKlean® adds .625” (5/8”) standoff & LTB
View A View B
Sample p/nZJZA100-QK8-1
x = Shaft Size mm∅Inch∅Ring
Group
Stainless (SS) W V P T G R D MAb Breader Bearing Components
mm in 16thsHousing
p/nin
mmin
mmin
mm Bolt sizein
mmin
mmin
mmin
mm Bearing Backing Plate AssemblyWtlbs
25 3/41
1216
522.047205C
ZA100-QK 1.87 2.5 2.65 5/16 .93 1.28 .13 1.70 205-16-J PA100-1 ZJZA100-QK8-1 1.0
“Breader Bearing” AssemblyStainless 4-Bolt QuiKlean® Housing with Solid Lubricated Ball Bearing Insert & Backing Plate
EDT recommends assembly with solid lubricated ball bearing.
NOTE: Ball bearing is recommended on popular breading equipment
Page 18 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
x = Shaft Size mm∅Inch∅Ring
GroupPolymer (KG) Housing p/n
Stainless (SS) Housing p/n
P V W R N B Q T
DoubleLock® Sleeve
B A E MA MB
Piloted Flange Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
F K Polymer (KG) Stainless (SS)
mm in 16thsin
mmin
mmin
mmin
mmin
mmin
mmin
mm Bolt Sizein
mmin
mmin
mmin
mmin
mmin
mmin
mm Assembly Wtlbs Assembly
Wtlbs
12
15
17
1/29/165/8
11/16
891011
401.575203A
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
25
3/413/167/8
15/161
1213141516
522.047205C
24GC 24AC 3.6392.1
4.38111.1
.389.5
1.1930.1
.8822.2
11.348.7
376.2 3/8 .50
12.71.7544
.6616.8
1.1629.5
.9423.8
1.8847.8
1.6542.0 _ _24GC9-x-LK 1.3 _ _24AC9-x-LK
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
24GD 24AD 3.6392.1
4.38111.1
.389.5
1.2531.7
.8822.2
.348.7
376.2 3/8 .50
12.72.050
.8020.2
1.3032.9
.9925.1
2.0151.2
1.7043.4 _ _24GD9-x-LK 1.7 _ _24AD9-x-LK
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
24GE 24AE 4.13104.8
5127.0
.389.5
1.2531.7
.8822.2
.348.7
3.3885.7 7/16 .50
12.72.2557
.9724.6
1.4737.3
125.4
2.1755.2
1.7043.3 _ _24GE9-x-LK 2.4 _ _24AE9-x-LK 5.2
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
24GF 24AF 4.38111.1
5.25133.4
.4411.1
1.4436.5
.8822.2
.348.7
3.6392.1 7/16 .50
12.72.3860
1.0125.6
1.5138.3
1.0927.8
2.2557.3
1.8446.8 _ _24GF9-x-LK 3.3 _ _24AF9-x-LK 6.1
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
24GG 24AG 4.38111.1
5.25133.4
.4411.1
1.4436.5
.8822.2
.348.7
3.6392.1 1/2
.6315.9
2.7570
1.0727.2
1.6943
1.2231
2.4462.0
1.9650.0
_ _24GG9-x-LK 3.7 _ _24AG9-x-LK 6.2 _ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
� 24GG/DSC � 24AG/DSC4.75
120.655-3/4146.1
4101.6 1/2 _ _24GG/DSC9-x-LK 3.7 _ _24AG/DSC9-x-LK 8.0
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
24GH 24AH 5.13130.2
6.13155.6
.6315.9
1.5038.1
.8822.2
.236.0
4.25108.0 1/2 .63
15.93.076
1.0727.2
1.6943
1.2231
2.5564.8
2.0852.8 _ _24GH9-x-LK 4.1 _ _24AH9-x-LK 8.8
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
24GI 24AI 5.38136.5
6.38161.9
.6315.9
1.5038.1
.8822.2
.194.7
4.25114.3 1/2 .63
15.93.2583
1.2231.1
1.8547
1.2531.8
2.6667.6
2.0652.4 _ _24GI9-x-LK 5.4 _ _24AI9-x-LK 9.9
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
24GJ 24AJ 6152.4
7.13180.9
.8822.2
1.8847.6
125.4
.194.7
5127 9/16 .63
15.93.486
1.4436.5
2.0652.4
1.2832.5
3.1279.4
2.3459.5 _ _24GJ9-x-LK _ _24AJ9-x-LK
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
24GK 24AK 6.5165.1
7.63193.7
125.4
250.8
125.4
.112.7
5.50132.1 9/16 .75
19.13.896
1.3534.3
2.1053.3
1.5038.1
3.2081.4
2.6066.2 _ _24GK9-x-LK 8.6 _ _24AK9-x-LK 16.1
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
24GL 24AL 7.5190.5
8.75222.2
1.1328.6
2.1354.0
125.4
.133.1
6.38161.9 11/16 .75
19.14.13105
1.2932.7
2.0451.8
1.5639.7
3.2883.4
2.8171.3 _ _24GL9-x-LK 9.7 _ _24AL9-x-LK
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
80
2-3/42-7/8
2-15/163
3-1/83-3/16
444647485051
1405.511216M
24GM 24AM 7.5190.5
8.75222.2
1.1328.6
2.1354.0
125.4
.133.1
6.38161.9 11/16 .75
19.14.45113
1.5138.4
2.2657.4
1.5940.4
3.5089.1
2.8372.0 _ _24GM9-x-LK 12.1 _ _24AM9-x-LK 25.5
_ _BUMO-xZALUM6-x-LK_ _IUM9-x-LK
Piloted 4-bolt FlangePolymer or Stainless “24” Series Piloted 4-Bolt Housing
Sample p/n 24GESample p/n 24AE
� 24GG/DSC is a specific match to the DODGE SC FC- bearing
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 19
x = Shaft Size mm∅Inch∅Ring
GroupPolymer (KG) Housing p/n
Stainless (SS) Housing p/n
P V W R N B Q T
DoubleLock® Sleeve
B A E MA MB
Piloted Flange Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
F K Polymer (KG) Stainless (SS)
mm in 16thsin
mmin
mmin
mmin
mmin
mmin
mmin
mm Bolt Sizein
mmin
mmin
mmin
mmin
mmin
mmin
mm Assembly Wtlbs Assembly
Wtlbs
12
15
17
1/29/165/8
11/16
891011
401.575203A
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
25
3/413/167/8
15/161
1213141516
522.047205C
24GC 24AC 3.6392.1
4.38111.1
.389.5
1.1930.1
.8822.2
11.348.7
376.2 3/8 .50
12.71.7544
.6616.8
1.1629.5
.9423.8
1.8847.8
1.6542.0 _ _24GC9-x-LK 1.3 _ _24AC9-x-LK
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
24GD 24AD 3.6392.1
4.38111.1
.389.5
1.2531.7
.8822.2
.348.7
376.2 3/8 .50
12.72.050
.8020.2
1.3032.9
.9925.1
2.0151.2
1.7043.4 _ _24GD9-x-LK 1.7 _ _24AD9-x-LK
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
24GE 24AE 4.13104.8
5127.0
.389.5
1.2531.7
.8822.2
.348.7
3.3885.7 7/16 .50
12.72.2557
.9724.6
1.4737.3
125.4
2.1755.2
1.7043.3 _ _24GE9-x-LK 2.4 _ _24AE9-x-LK 5.2
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
24GF 24AF 4.38111.1
5.25133.4
.4411.1
1.4436.5
.8822.2
.348.7
3.6392.1 7/16 .50
12.72.3860
1.0125.6
1.5138.3
1.0927.8
2.2557.3
1.8446.8 _ _24GF9-x-LK 3.3 _ _24AF9-x-LK 6.1
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
24GG 24AG 4.38111.1
5.25133.4
.4411.1
1.4436.5
.8822.2
.348.7
3.6392.1 1/2
.6315.9
2.7570
1.0727.2
1.6943
1.2231
2.4462.0
1.9650.0
_ _24GG9-x-LK 3.7 _ _24AG9-x-LK 6.2 _ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
� 24GG/DSC � 24AG/DSC4.75
120.655-3/4146.1
4101.6 1/2 _ _24GG/DSC9-x-LK 3.7 _ _24AG/DSC9-x-LK 8.0
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
24GH 24AH 5.13130.2
6.13155.6
.6315.9
1.5038.1
.8822.2
.236.0
4.25108.0 1/2 .63
15.93.076
1.0727.2
1.6943
1.2231
2.5564.8
2.0852.8 _ _24GH9-x-LK 4.1 _ _24AH9-x-LK 8.8
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
24GI 24AI 5.38136.5
6.38161.9
.6315.9
1.5038.1
.8822.2
.194.7
4.25114.3 1/2 .63
15.93.2583
1.2231.1
1.8547
1.2531.8
2.6667.6
2.0652.4 _ _24GI9-x-LK 5.4 _ _24AI9-x-LK 9.9
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
24GJ 24AJ 6152.4
7.13180.9
.8822.2
1.8847.6
125.4
.194.7
5127 9/16 .63
15.93.486
1.4436.5
2.0652.4
1.2832.5
3.1279.4
2.3459.5 _ _24GJ9-x-LK _ _24AJ9-x-LK
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
24GK 24AK 6.5165.1
7.63193.7
125.4
250.8
125.4
.112.7
5.50132.1 9/16 .75
19.13.896
1.3534.3
2.1053.3
1.5038.1
3.2081.4
2.6066.2 _ _24GK9-x-LK 8.6 _ _24AK9-x-LK 16.1
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
24GL 24AL 7.5190.5
8.75222.2
1.1328.6
2.1354.0
125.4
.133.1
6.38161.9 11/16 .75
19.14.13105
1.2932.7
2.0451.8
1.5639.7
3.2883.4
2.8171.3 _ _24GL9-x-LK 9.7 _ _24AL9-x-LK
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
80
2-3/42-7/8
2-15/163
3-1/83-3/16
444647485051
1405.511216M
24GM 24AM 7.5190.5
8.75222.2
1.1328.6
2.1354.0
125.4
.133.1
6.38161.9 11/16 .75
19.14.45113
1.5138.4
2.2657.4
1.5940.4
3.5089.1
2.8372.0 _ _24GM9-x-LK 12.1 _ _24AM9-x-LK 25.5
_ _BUMO-xZALUM6-x-LK_ _IUM9-x-LK
All-Round® Solution® Piloted Flange “24” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QB24GE9-23-LKSample p/n QB24AE9-23-LK
� 24GG/DSC is a specific match to the DODGE SC FC- bearing
View A View B
Page 20 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
x = Shaft Size
mm∅Inch∅Ring
Group
Polymer (KG) Stainless (SS)
Z W Z+W P T
DoubleLock® Sleeve 3-Bolt Extension Assembly Polymer
Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Housing p/n
V Q
N G
Housing p/n
V Q
N G R
Polymer (KG) Stainless (SS) N1* G1* N1* G1* R1*
mm in 16thsin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm Bolt sizein
mm
F K U A B E Std Assembly
Wtlbs
MA* MB* MC MD Std Assembly
Wtlbs
MA* MB* MC MD
inmm
inmm
inmm
inmm
inmm
inmm QK Assembly in in in in QK Assembly in in in in
12
15
17
1/29/165/8
11/16
891011
401.575203A
3GA3.6592.9
2.1955.6
.4411.1
.5313.4
3AA 3.588.9
250.8
.256.4
.5313.5
1.3834.9
.8120.6
2.1955.6
1.2531.8 5/16
.8521.5 0.44
11.21.4938
.5313.5
1.0426.4
.6015.2
.7519.1 _ _3GA9-x-LK .5 1.56
39.81.2832.5
1.3534.5
1.0727.2 _ _3AA9-x-LK 1.0 1.56
39.81.2832.5
1.3534.5
1.0727.2
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK3GA-QK 1.06
27.01.1529.3
1.4837.4
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
3GB4.34110.3
2.5665.1
.4411.1
.5915
3AB 4.25108.0
2.563.5
.317.9
.5914.9
1.6842.9
.8922.2
2.5665
1.538.1 3/8
.9524.1 .50
12.71.6341
.6015.2
1.1027.9
.6015.2
.9423.8
_ _3GB9-x-LK .71.6943.0
1.5338.9
1.4536.9
1.2932.8 _ _3AB9-x-LK 1.6 1.69
43.01.5338.9
1.4536.9
1.2932.8
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
3GB-QK 1.0627.0
1.2231.0
1.5840.0 _ _3GB-QK9-x-LK .8
25
3/413/167/8
15/161
1213141516
522.047205C
3GC4.75120.7
2.7569.9
.5012.7
.6316
3AC 4.75120.7
2.7569.9
.389.5
.6416.3
1.8146.1
1.1228.6
2.9474.6
1.6241.3 3/8
125.4 .50
12.71.7544
.6416.3
1.1629.5
.6616.8
.9423.8
_ _3GC9-x-LK 1.01.7945.6
1.5739.9
1.5138.5
1.2932.8 _ _3AC9-x-LK 2.1 1.79
45.61.5739.9
1.4938.0
1.2732.3
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK3GC-QK 1.12
28.61.2632.0
1.6241.1 _ _3GC-QK9-x-LK 1.1
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
3GD5.44138.1
3.2582.6
.5012.7
.6616.7
3AD 5.38136.5
3.1279.4
.389.5
.6616.7
2.0652.4
1.2531.8
3.3184
1.8447.6 3/8
1.0627.1 .50
12.72.050
.6616.8
1.3032.9
.8020.2
.9925.1
_ _3GD9-x-LK 1.51.9549.6
1.6441.8
1.7043.3
1.3935.5 _ _3AD9-x-LK 2.9 1.95
49.61.6441.8
1.7043.3
1.3935.5
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
3GD-QK 1.1228.6
1.2820
1.6843.0 _ _3GD-QK9-x-LK 1.6
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
3GE6.19157.2
3.5696.9
.5614.3
.7920 3AE
6152.4
3.6392.1
.5012.7
.7920
2.3760.3
1.2531.8
1.8492
250.8 1/2
1.2231.1
.5012.7
2.2557
.8020.3
1.4737.3
.9724.6
125.4
_ _3GE9-x-LK 2.22.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _3AE9-x-LK 4.72.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK3GE-QK 1.18
30.21.4235.4 3AE-QK 1.13
28.61.4235.9
1.8446.9 _ _3GE-QK9-x-LK 2.3 _ _3AE9-QK-x-LK 5.3
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
3GF6.67170.7
4.25108.0
.5614.3
.7719.5
3AF 6.5165.1
4101.6
.5012.7
.7719.6
2.5665.1
1.3734.9
3.94100
2.2557.2 1/2
1.2831.8 .50
12.72.3860
.8020.3
1.5138.3
1.0125.6
1.0927.8
_ _3GF9-x-LK 3.12.2757.7
1.8647.2
1.9750.2
1.5639.7 _ _3AF9-x-LK 5.7 2.27
57.71.8647.2
1.9750.2
1.5639.7
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK3GF-QK 1.19
30.21.3935.4
1.8647.4 _ _3GF-QK9-x-LK 3.3
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
-- -- -- -- -- 3AG 6.94176.2
4.25108.0
.5012.7
.7619.8
2.7569.9
1.538.1
4.25104.8
2.563.5 1/2 1.24
31.8.6315.9
2.7570
.7819.8
1.6943
1.0727.2
1.2231.0 -- -- 2.45
62.31.9850.3
2.1755.1
1.6943.1 _ _3AG9-x-LK 6.7 2.45
62.31.9850.3
2.1755.1
1.6943.1
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
3GH 7.62193.7
4.87123.8
.6215.9
.7719.6 3AH 7.41
188.14.56115.9
.5012.7
.7719.4
2.9474.6
1.6241.3
4.56115.8
2.7569.9 1/2 1.24
31.8.6315.9
3.076
.7819.8
1.6943
1.0727.2
1.2231.0 _ _3GH9-x-LK 4.1 2.46
62.51.9850.5
2.1654.9
1.6842.9 _ _3AH9-x-LK 7.7 2.46
62.51.9850.5
2.1654.9
1.6842.9
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
3GI 8.29210.6
5.37136.5
.6917.5
.9223.5 3AI 8.04
205.64.95128.6
.6315.9
.9223.4
3.1279.4
1.7544.5
4.87123.8
376.2 5/8 1.47
37.3.6315.9
3.2583
.9323.6
1.8547
1.2231.1
1.2531.8 _ _3GI9-x-LK 5.6 2.77
70.42.1755.2
2.3960.9
1.7945.6 _ _3AI9-x-LK 10.9 2.77
70.42.1755.2
2.3960.9
1.7945.6
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
3GJ 9.19233.4
6152.4
.6917.5
1.0727.1 3AJ 8.88
225.45.63142.9
.6315.9
1.0727.2
3.3785.7
250.8
5.37136.5
3.588.9 5/8 1.66
42.1.6315.9
3.486
1.127.9
2.0652.4
1.4436.5
1.2832.5 _ _3GJ9-x-LK 7.0 3.13
79.52.3459.6
2.6567.4
1.8747.5 _ _3AJ9-x-LK 12.0 3.13
79.52.3459.6
2.6567.4
1.8747.5
_BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
-- -- -- -- -- 3AK 10.03254.8
6.47163.5
.6315.9
1.2531.8
3.7595.3
2.3760.3
6.12155.5
4.25108.0 5/8 1.87
47.6.7519.1
3.896
1.2431.5
2.1053.3
1.3534.3
1.5038.1 -- -- 3.35
85.02.7569.8
2.7168.8
2.1153.5 _ _3AK9-x-LK 14.2 3.35
85.02.7569.8
2.7168.8
2.1153.5
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
-- -- -- -- -- 3AL 10.69271.5
6.5165.1
.7519.1
1.3935.2
4101.6
2.6266.7
6.62168.3
4.25108.0 3/4 2
50.8.7519.1
4.13105
1.3835.0
2.0451.8
1.2932.7
1.5639.7 -- -- 3.42
86.92.9474.8
2.6366.8
2.1554.7 _ _3AL9-x-LK 15.1 3.42
86.92.9474.8
2.6366.8
2.1554.7
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
3-Bolt Extension FlangePolymer or Stainless “3” Series 3-Bolt Extension Housing
Sample p/n 3ACSample p/n 3GC-QK*QuiKlean® adds .625” (5/8”) standoff & LTB
Standard QuiKlean®
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 21
x = Shaft Size
mm∅Inch∅Ring
Group
Polymer (KG) Stainless (SS)
Z W Z+W P T
DoubleLock® Sleeve 3-Bolt Extension Assembly Polymer
Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Housing p/n
V Q
N G
Housing p/n
V Q
N G R
Polymer (KG) Stainless (SS) N1* G1* N1* G1* R1*
mm in 16thsin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm Bolt sizein
mm
F K U A B E Std Assembly
Wtlbs
MA* MB* MC MD Std Assembly
Wtlbs
MA* MB* MC MD
inmm
inmm
inmm
inmm
inmm
inmm QK Assembly in in in in QK Assembly in in in in
12
15
17
1/29/165/8
11/16
891011
401.575203A
3GA3.6592.9
2.1955.6
.4411.1
.5313.4
3AA 3.588.9
250.8
.256.4
.5313.5
1.3834.9
.8120.6
2.1955.6
1.2531.8 5/16
.8521.5 0.44
11.21.4938
.5313.5
1.0426.4
.6015.2
.7519.1 _ _3GA9-x-LK .5 1.56
39.81.2832.5
1.3534.5
1.0727.2 _ _3AA9-x-LK 1.0 1.56
39.81.2832.5
1.3534.5
1.0727.2
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK3GA-QK 1.06
27.01.1529.3
1.4837.4
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
3GB4.34110.3
2.5665.1
.4411.1
.5915
3AB 4.25108.0
2.563.5
.317.9
.5914.9
1.6842.9
.8922.2
2.5665
1.538.1 3/8
.9524.1 .50
12.71.6341
.6015.2
1.1027.9
.6015.2
.9423.8
_ _3GB9-x-LK .71.6943.0
1.5338.9
1.4536.9
1.2932.8 _ _3AB9-x-LK 1.6 1.69
43.01.5338.9
1.4536.9
1.2932.8
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
3GB-QK 1.0627.0
1.2231.0
1.5840.0 _ _3GB-QK9-x-LK .8
25
3/413/167/8
15/161
1213141516
522.047205C
3GC4.75120.7
2.7569.9
.5012.7
.6316
3AC 4.75120.7
2.7569.9
.389.5
.6416.3
1.8146.1
1.1228.6
2.9474.6
1.6241.3 3/8
125.4 .50
12.71.7544
.6416.3
1.1629.5
.6616.8
.9423.8
_ _3GC9-x-LK 1.01.7945.6
1.5739.9
1.5138.5
1.2932.8 _ _3AC9-x-LK 2.1 1.79
45.61.5739.9
1.4938.0
1.2732.3
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK3GC-QK 1.12
28.61.2632.0
1.6241.1 _ _3GC-QK9-x-LK 1.1
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
3GD5.44138.1
3.2582.6
.5012.7
.6616.7
3AD 5.38136.5
3.1279.4
.389.5
.6616.7
2.0652.4
1.2531.8
3.3184
1.8447.6 3/8
1.0627.1 .50
12.72.050
.6616.8
1.3032.9
.8020.2
.9925.1
_ _3GD9-x-LK 1.51.9549.6
1.6441.8
1.7043.3
1.3935.5 _ _3AD9-x-LK 2.9 1.95
49.61.6441.8
1.7043.3
1.3935.5
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
3GD-QK 1.1228.6
1.2820
1.6843.0 _ _3GD-QK9-x-LK 1.6
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
3GE6.19157.2
3.5696.9
.5614.3
.7920 3AE
6152.4
3.6392.1
.5012.7
.7920
2.3760.3
1.2531.8
1.8492
250.8 1/2
1.2231.1
.5012.7
2.2557
.8020.3
1.4737.3
.9724.6
125.4
_ _3GE9-x-LK 2.22.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _3AE9-x-LK 4.72.2657.4
1.7945.5
1.9048.2
1.4336.3
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK3GE-QK 1.18
30.21.4235.4 3AE-QK 1.13
28.61.4235.9
1.8446.9 _ _3GE-QK9-x-LK 2.3 _ _3AE9-QK-x-LK 5.3
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
3GF6.67170.7
4.25108.0
.5614.3
.7719.5
3AF 6.5165.1
4101.6
.5012.7
.7719.6
2.5665.1
1.3734.9
3.94100
2.2557.2 1/2
1.2831.8 .50
12.72.3860
.8020.3
1.5138.3
1.0125.6
1.0927.8
_ _3GF9-x-LK 3.12.2757.7
1.8647.2
1.9750.2
1.5639.7 _ _3AF9-x-LK 5.7 2.27
57.71.8647.2
1.9750.2
1.5639.7
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK3GF-QK 1.19
30.21.3935.4
1.8647.4 _ _3GF-QK9-x-LK 3.3
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
-- -- -- -- -- 3AG 6.94176.2
4.25108.0
.5012.7
.7619.8
2.7569.9
1.538.1
4.25104.8
2.563.5 1/2 1.24
31.8.6315.9
2.7570
.7819.8
1.6943
1.0727.2
1.2231.0 -- -- 2.45
62.31.9850.3
2.1755.1
1.6943.1 _ _3AG9-x-LK 6.7 2.45
62.31.9850.3
2.1755.1
1.6943.1
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
3GH 7.62193.7
4.87123.8
.6215.9
.7719.6 3AH 7.41
188.14.56115.9
.5012.7
.7719.4
2.9474.6
1.6241.3
4.56115.8
2.7569.9 1/2 1.24
31.8.6315.9
3.076
.7819.8
1.6943
1.0727.2
1.2231.0 _ _3GH9-x-LK 4.1 2.46
62.51.9850.5
2.1654.9
1.6842.9 _ _3AH9-x-LK 7.7 2.46
62.51.9850.5
2.1654.9
1.6842.9
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
3GI 8.29210.6
5.37136.5
.6917.5
.9223.5 3AI 8.04
205.64.95128.6
.6315.9
.9223.4
3.1279.4
1.7544.5
4.87123.8
376.2 5/8 1.47
37.3.6315.9
3.2583
.9323.6
1.8547
1.2231.1
1.2531.8 _ _3GI9-x-LK 5.6 2.77
70.42.1755.2
2.3960.9
1.7945.6 _ _3AI9-x-LK 10.9 2.77
70.42.1755.2
2.3960.9
1.7945.6
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
3GJ 9.19233.4
6152.4
.6917.5
1.0727.1 3AJ 8.88
225.45.63142.9
.6315.9
1.0727.2
3.3785.7
250.8
5.37136.5
3.588.9 5/8 1.66
42.1.6315.9
3.486
1.127.9
2.0652.4
1.4436.5
1.2832.5 _ _3GJ9-x-LK 7.0 3.13
79.52.3459.6
2.6567.4
1.8747.5 _ _3AJ9-x-LK 12.0 3.13
79.52.3459.6
2.6567.4
1.8747.5
_BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
-- -- -- -- -- 3AK 10.03254.8
6.47163.5
.6315.9
1.2531.8
3.7595.3
2.3760.3
6.12155.5
4.25108.0 5/8 1.87
47.6.7519.1
3.896
1.2431.5
2.1053.3
1.3534.3
1.5038.1 -- -- 3.35
85.02.7569.8
2.7168.8
2.1153.5 _ _3AK9-x-LK 14.2 3.35
85.02.7569.8
2.7168.8
2.1153.5
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
-- -- -- -- -- 3AL 10.69271.5
6.5165.1
.7519.1
1.3935.2
4101.6
2.6266.7
6.62168.3
4.25108.0 3/4 2
50.8.7519.1
4.13105
1.3835.0
2.0451.8
1.2932.7
1.5639.7 -- -- 3.42
86.92.9474.8
2.6366.8
2.1554.7 _ _3AL9-x-LK 15.1 3.42
86.92.9474.8
2.6366.8
2.1554.7
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
All-Round® Solution® 3-Bolt Extension Flange“3” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QB3GE9-23-LKSample p/n QB3AE9-22-LK
*QuiKlean® adds .625” (5/8”) standoff & LTB
View A View B View C View D
Page 22 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
x = Shaft Size mm∅Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P W G R T
DoubleLock®
Sleeve Round 3-Bolt AssemblyPolymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
N N F K
Polymer (KG) Stainless (SS)
U A B E
Assembly Wtlbs
MA MB
Assembly Wtlbs
MA MB
mm in 16thsHousing
p/nin
mmHousing
p/nin
mmin
mmin
mmin
mmin
mm Bolt Sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
12
15
17
1/29/165/8
11/16
891011
401.575203A
22GA.389.5
22AA.389.5
2.563.5
2.4 .439.5
.6917.5 1/4 .44
11.21.4938
.4310.9
1.0426.4
.6015.2
.7519.1
_ _22GA9-x-LK .51.3935.20
1.230.4
_ _22AA9-x-LK 11.3935.2
1.230.4
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK22GA-01 22AA-01 2.39
60.7 _ _22GA-019-x-LK .5 _ _22AA-019-x-LK 1
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
22GB .4212.7 22AB .42
12.72.8171.4 2.5 .45
9.5.7819.8 5/16 .50
1.271.6341
.4310.9
1.1027.9
.6015.2
0.9423.8 _ _22GB9-x-LK .6 1.52
38.71.0226.0 _ _22AB9-x-LK 1.5 1.52
38.71.0226.0
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
22GC .5012.7 22AC .42
12.73
76.2 2.8 .539.5
.8421.4 5/16 .50
1.271.7544
.5814.7
1.1629.5
.6616.8
0.9423.8 _ _22GC9-x-LK .8 1.67
42.51.1729.8 _ _22AC9-x-LK 2 1.67
42.51.1729.8
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
22GD .5813.9 22AD .58
11.93.5690.5 3.4 .60
11.9.9822.2 3/8 .50
1.27250
.6015.2
1.3032.9
.8020.2
0.9925.1 _ _22GD9-x-LK 1.3 1.87
47.61.3734.9 _ _22AD9-x-LK 2.6 1.87
47.61.3734.9
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
22GE .6514.3 22AE .65
16.73.94100.0 3.7 .70
12.71.1123.8 3/8 .50
12.72.2557
.6817.3
1.4737.3
.9724.6
1.0025.4 _ _22GE9-x-LK 1.9 2.15
54.61.6541.9 _ _22AE9-x-LK 3.5 2.15
54.61.6541.9
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
-- -- 22AF .6516.7
4.64119.1 4.2 .70
12.71.1228.6 1/2 .50
12.72.3860
1.5138.3
1.0125.6
1.0927.8 -- -- -- _ _22AF9-x-LK
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
-- -- 22AG .6516.7
4.75120.7 4.5 .70
12.71.121.12 1/2 .63
15.92.7570
1.6943.0
1.0727.2
1.2231.0 -- -- -- _ _22AG9-x-LK
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
-- -- 22AH .6315.9
5127.0 4.6 .70
12.71.1228.6 1/2 .63
15.93.076
.7218.3
1.6943.0
1.0727.2
1.2231.0 -- -- -- _ _22AH9-x-LK 5.5 2.41
61.21.7845.3
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
Round 3-Bolt FlangePolymer or Stainless “22” Series Round 3-Bolt Housing
Sample p/n 22GESample p/n 22AE
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 23
x = Shaft Size mm∅Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P W G R T
DoubleLock®
Sleeve Round 3-Bolt AssemblyPolymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
N N F K
Polymer (KG) Stainless (SS)
U A B E
Assembly Wtlbs
MA MB
Assembly Wtlbs
MA MB
mm in 16thsHousing
p/nin
mmHousing
p/nin
mmin
mmin
mmin
mmin
mm Bolt Sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm
12
15
17
1/29/165/8
11/16
891011
401.575203A
22GA.389.5
22AA.389.5
2.563.5
2.4 .439.5
.6917.5 1/4 .44
11.21.4938
.4310.9
1.0426.4
.6015.2
.7519.1
_ _22GA9-x-LK .51.3935.20
1.230.4
_ _22AA9-x-LK 11.3935.2
1.230.4
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK22GA-01 22AA-01 2.39
60.7 _ _22GA-019-x-LK .5 _ _22AA-019-x-LK 1
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
22GB .4212.7 22AB .42
12.72.8171.4 2.5 .45
9.5.7819.8 5/16 .50
1.271.6341
.4310.9
1.1027.9
.6015.2
0.9423.8 _ _22GB9-x-LK .6 1.52
38.71.0226.0 _ _22AB9-x-LK 1.5 1.52
38.71.0226.0
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
22GC .5012.7 22AC .42
12.73
76.2 2.8 .539.5
.8421.4 5/16 .50
1.271.7544
.5814.7
1.1629.5
.6616.8
0.9423.8 _ _22GC9-x-LK .8 1.67
42.51.1729.8 _ _22AC9-x-LK 2 1.67
42.51.1729.8
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
22GD .5813.9 22AD .58
11.93.5690.5 3.4 .60
11.9.9822.2 3/8 .50
1.27250
.6015.2
1.3032.9
.8020.2
0.9925.1 _ _22GD9-x-LK 1.3 1.87
47.61.3734.9 _ _22AD9-x-LK 2.6 1.87
47.61.3734.9
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
22GE .6514.3 22AE .65
16.73.94100.0 3.7 .70
12.71.1123.8 3/8 .50
12.72.2557
.6817.3
1.4737.3
.9724.6
1.0025.4 _ _22GE9-x-LK 1.9 2.15
54.61.6541.9 _ _22AE9-x-LK 3.5 2.15
54.61.6541.9
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
-- -- 22AF .6516.7
4.64119.1 4.2 .70
12.71.1228.6 1/2 .50
12.72.3860
1.5138.3
1.0125.6
1.0927.8 -- -- -- _ _22AF9-x-LK
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
-- -- 22AG .6516.7
4.75120.7 4.5 .70
12.71.121.12 1/2 .63
15.92.7570
1.6943.0
1.0727.2
1.2231.0 -- -- -- _ _22AG9-x-LK
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
-- -- 22AH .6315.9
5127.0 4.6 .70
12.71.1228.6 1/2 .63
15.93.076
.7218.3
1.6943.0
1.0727.2
1.2231.0 -- -- -- _ _22AH9-x-LK 5.5 2.41
61.21.7845.3
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
All-Round® Solution® Round 3-Bolt“22” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QB22GB9-3/4Sample p/n QB22AB9-3/4View A View B
Page 24 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
x = Shaft Size
mm∅Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P V Z Y Ø N W R U T
DoubleLock® Sleeve
B A E G
Narrow Slot Take-Up Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Housing p/n
Q
Housing p/n
Q F K Polymer (KG) Stainless (SS)
mm in 16thsin
mmin
mmin
mmin
mmin
mm Roll Pinin
mm inin
mmin
mmThread
Sizein
mmin
mmin
mmin
mmin
mmin
mm Assembly Wtlbs
MA MB
Assembly Wtlbs
MA MB
inmm
inmm
inmm
inmm
12
15
17
1/29/165/8
11/16
891011
401.575203A
-- -- 5AA 2.6968.3
250.8
2.5063.5
1.6942.9
1/4 x 7/8.317.9 1/4 .88
22.2.6315.9
1/2 - 13 .4411.2
1.3534.3
.6015.2
1.0426.4
.7519.1
.4411.1 -- -- 1.54
39.11.2531.7 _ _5AA9-x-LK 1.2 1.48
37.51.1930.2
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
5GB 3.4487.3 5AB 3.44
87.32.6366.7
3.1379.4
2.1955.5
5/16 x 11/4.4411.1 1/4 1.25
31.8.8822.2
3/4 - 10 .5012.7
1.6341
.6015.2
1.1027.9
.9423.8
.6315.9 _ _5GB9-x-LK .9 1.79
45.41.6341.4 _ _5AB9-x-LK 2.5 1.71
43.41.5539.3
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
5GC 3.5690.5 5AC 3.56
90.52.6366.7
3.1379.4
2.1955.5
5/16 x 11/4.4411.1 1/47 1.25
31.8.8822.2
3/4 - 10 .5012.7
1.7544
.6616.8
1.1629.5
.9423.8
.6315.9 _ _5GC9-x-LK 1.0 1.85
46.91.6341.4 _ _5AC9-x-LK 2.7 1.77
44.91.5539.3
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
5GD 4.31109.5 5AD 4.31
109.53.5088.9
4.13104.8
2.6968.3
5/16 x 11/4.5012.7 1/4 1.25
31..81
25.43/4 - 10 .50
12.72.050
.8020.2
1.3032.9
.9925.1
.6315.9 _ _5GD9-x-LK 1.6 1.98
50.21.6842.6 _ _5AD9-x-LK 4.6 1.91
48.51.640.6
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
5GE 4.50114.3 5AE 4.50
114.33.5088.9
4.13104.8
2.6968.3
5/16 x 11/4.5012.7 1/4 1.25
31.81
25.43/4 - 10 .50
12.72.2557
.9724.6
1.4737.3
125.4
.6315.9 _ _5GE9-x-LK 2.3 2.16
54.81.6942.9 _ _5AE9-x-LK 4.9 2.08
52.81.6140.8
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
5GF 5.38136.5 5AF 5.38
136.54
101.64.75120.7
3.2582.6
3/8 x 11/2.6616.7 5/16 1.25
38.11.1229.4
7/8 - 9.5012.7
2.3860
1.0125.6
1.5138.3
1.0927.8
.6315.9 _ _5GF9-x-LK 3.5 2.32
58.91.9148.5 _ _5AF9-x-LK 8.1 2.24
56.81.8346.4
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
5GG 5.38136.5 5AG 5.44
138.14
101.64.75120.7
3.2582.6
3/8 x 11/2.6616.7 5/16 1.25
38.11.1629.4
7/8 - 9.6315.9
2.7570
1.0727.2
1.6943
1.2231
.6315.9 _ _5GG9-x-LK 4.0 2.51
63.72.0351.5 _ _5AG9-x-LK 8.3 2.43
61.71.9549.5
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
5GH 5.5139.7 5AH 5.5
139.74
101.64.75120.7
3.2582.6
3/8 x 11/2.6616.7 5/16 1.25
38.11.1629.4
7/8 - 9.6315.9
3.076
1.0727.2
1.6943
1.2231
.6315.9 _ _5GH9-x-LK 4.3 2.51
63.72.0351.5 _ _5AH9-x-LK 8.5 2.43
61.71.9549.5
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
-- 6.13155.6 5AI 6.13
155.64.44112.7
5.38136.5
3.6392.1
7/16 x 13/4.6917.5 5/16 1.75
44.51.2832.5 1 - 8 .63
15.93.2583
1.2231.1
1.8547
1.2531.8
.8822.3 -- -- 2.73
69.32.1354.1 _ _5AI9-x-LK 11.9 2.59
65.71.9950.5
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
-- 6.69169.9 5AJ 6.69
169.94.94125.4
5.75146.1
3.8898.4
7/16 x 13/4.6917.5 5/16 1.75
44.51.2832.5 1 - 8 .63
15.93.486
1.4436.5
2.0652.4
1.2832.5
.8822.3 -- -- 2.94
74.62.1654.8 _ _5AJ9-x-LK 13.2 2.92
74.12.1755.1
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
5GK 7.38187.3 5AK 7.38
187.35.50139.7
6.38161.9
4.94109.5
1/2 x 17/8.7519.1 3/8 1.88
47.61.5038.1 11/4 - 7
.7519.1
3.896
1.3534.3
2.1053.3
1.5038.1
.9423.8 _ _5GK9-x-LK 8.9 3.1
78.72.563.5 _ _5AK9-x-LK 15.6 2.96
75.12.3659.9
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
5GL 7.69195.3 5AL 7.69
195.35.88149.2
6.75171.5
4.44112.7
1/2 x 17/8.7519.1 3/8 1.88
47.61.5038.1 11/4 - 7
.7519.1
4.13105
1.2932.7
2.0451.8
1.5639.7
.9423.8 _ _5GL9-x-LK 9.5 3.04
77.22.5665.0 _ _5AL9-x-LK 16.5 2.98
75.62.563.5
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
Narrow Slot Take-Up HousingPolymer or Stainless “5” Series Narrow Slot Take-Up Housing
Sample p/n 5GE Sample p/n 5AE
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 25
x = Shaft Size
mm∅Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P V Z Y Ø N W R U T
DoubleLock® Sleeve
B A E G
Narrow Slot Take-Up Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Housing p/n
Q
Housing p/n
Q F K Polymer (KG) Stainless (SS)
mm in 16thsin
mmin
mmin
mmin
mmin
mm Roll Pinin
mm inin
mmin
mmThread
Sizein
mmin
mmin
mmin
mmin
mmin
mm Assembly Wtlbs
MA MB
Assembly Wtlbs
MA MB
inmm
inmm
inmm
inmm
12
15
17
1/29/165/8
11/16
891011
401.575203A
-- -- 5AA 2.6968.3
250.8
2.5063.5
1.6942.9
1/4 x 7/8.317.9 1/4 .88
22.2.6315.9
1/2 - 13 .4411.2
1.3534.3
.6015.2
1.0426.4
.7519.1
.4411.1 -- -- 1.54
39.11.2531.7 _ _5AA9-x-LK 1.2 1.48
37.51.1930.2
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
5GB 3.4487.3 5AB 3.44
87.32.6366.7
3.1379.4
2.1955.5
5/16 x 11/4.4411.1 1/4 1.25
31.8.8822.2
3/4 - 10 .5012.7
1.6341
.6015.2
1.1027.9
.9423.8
.6315.9 _ _5GB9-x-LK .9 1.79
45.41.6341.4 _ _5AB9-x-LK 2.5 1.71
43.41.5539.3
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
5GC 3.5690.5 5AC 3.56
90.52.6366.7
3.1379.4
2.1955.5
5/16 x 11/4.4411.1 1/47 1.25
31.8.8822.2
3/4 - 10 .5012.7
1.7544
.6616.8
1.1629.5
.9423.8
.6315.9 _ _5GC9-x-LK 1.0 1.85
46.91.6341.4 _ _5AC9-x-LK 2.7 1.77
44.91.5539.3
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
5GD 4.31109.5 5AD 4.31
109.53.5088.9
4.13104.8
2.6968.3
5/16 x 11/4.5012.7 1/4 1.25
31..81
25.43/4 - 10 .50
12.72.050
.8020.2
1.3032.9
.9925.1
.6315.9 _ _5GD9-x-LK 1.6 1.98
50.21.6842.6 _ _5AD9-x-LK 4.6 1.91
48.51.640.6
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
5GE 4.50114.3 5AE 4.50
114.33.5088.9
4.13104.8
2.6968.3
5/16 x 11/4.5012.7 1/4 1.25
31.81
25.43/4 - 10 .50
12.72.2557
.9724.6
1.4737.3
125.4
.6315.9 _ _5GE9-x-LK 2.3 2.16
54.81.6942.9 _ _5AE9-x-LK 4.9 2.08
52.81.6140.8
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
5GF 5.38136.5 5AF 5.38
136.54
101.64.75120.7
3.2582.6
3/8 x 11/2.6616.7 5/16 1.25
38.11.1229.4
7/8 - 9.5012.7
2.3860
1.0125.6
1.5138.3
1.0927.8
.6315.9 _ _5GF9-x-LK 3.5 2.32
58.91.9148.5 _ _5AF9-x-LK 8.1 2.24
56.81.8346.4
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
5GG 5.38136.5 5AG 5.44
138.14
101.64.75120.7
3.2582.6
3/8 x 11/2.6616.7 5/16 1.25
38.11.1629.4
7/8 - 9.6315.9
2.7570
1.0727.2
1.6943
1.2231
.6315.9 _ _5GG9-x-LK 4.0 2.51
63.72.0351.5 _ _5AG9-x-LK 8.3 2.43
61.71.9549.5
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
5GH 5.5139.7 5AH 5.5
139.74
101.64.75120.7
3.2582.6
3/8 x 11/2.6616.7 5/16 1.25
38.11.1629.4
7/8 - 9.6315.9
3.076
1.0727.2
1.6943
1.2231
.6315.9 _ _5GH9-x-LK 4.3 2.51
63.72.0351.5 _ _5AH9-x-LK 8.5 2.43
61.71.9549.5
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
-- 6.13155.6 5AI 6.13
155.64.44112.7
5.38136.5
3.6392.1
7/16 x 13/4.6917.5 5/16 1.75
44.51.2832.5 1 - 8 .63
15.93.2583
1.2231.1
1.8547
1.2531.8
.8822.3 -- -- 2.73
69.32.1354.1 _ _5AI9-x-LK 11.9 2.59
65.71.9950.5
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
-- 6.69169.9 5AJ 6.69
169.94.94125.4
5.75146.1
3.8898.4
7/16 x 13/4.6917.5 5/16 1.75
44.51.2832.5 1 - 8 .63
15.93.486
1.4436.5
2.0652.4
1.2832.5
.8822.3 -- -- 2.94
74.62.1654.8 _ _5AJ9-x-LK 13.2 2.92
74.12.1755.1
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
5GK 7.38187.3 5AK 7.38
187.35.50139.7
6.38161.9
4.94109.5
1/2 x 17/8.7519.1 3/8 1.88
47.61.5038.1 11/4 - 7
.7519.1
3.896
1.3534.3
2.1053.3
1.5038.1
.9423.8 _ _5GK9-x-LK 8.9 3.1
78.72.563.5 _ _5AK9-x-LK 15.6 2.96
75.12.3659.9
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
5GL 7.69195.3 5AL 7.69
195.35.88149.2
6.75171.5
4.44112.7
1/2 x 17/8.7519.1 3/8 1.88
47.61.5038.1 11/4 - 7
.7519.1
4.13105
1.2932.7
2.0451.8
1.5639.7
.9423.8 _ _5GL9-x-LK 9.5 3.04
77.22.5665.0 _ _5AL9-x-LK 16.5 2.98
75.62.563.5
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
All-Round® Solution® Narrow Slot Take-Up“5” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QB5AE9-23-LKView A View B
Page 26 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Sample p/n 7AESample p/n 7GC
x = Shaft Size mm∅Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P V Z
Y
N W U R T
DoubleLock® Sleeve
B A E G
Wide Slot Take-Up Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Polymer (KG) Stainless (SS)
Q Q F K
Assembly p/nWtlbs
MA MB
Assembly p/nWtlbs
MA MB
mm in 16thsHousing
p/nin
mmHousing
p/nin
mmin
mmin
mmin
mm Nut Sizein
mmin
mmin
mmin
mmin
mmThread
Sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm12
15
17
1/29/165/8
11/16
891011
401.575
203A
-- -- 7AG 3..1379.5
2.563.5
376.2
250.8
1/2 - 13 1.2531.8
.317.9
.4110.3
.8120.6
125.4
1/2 - 13 .4411.2
1.4938
.6015.2
1.0426.4
.7519.1
.512.2 -- -- 1.6
40.61.3133.2 _ _7AA9-x-LK -- 1.53
38.81.2431.4
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
7GB 3.6993.7 7AB 3.69
93.73
76.23.6392.1
2.3860.3
5/8 - 11 1.4436.5
.4411.1
.5313.5
1.0627.0
1.3834.9
5/8 - 11 .5012.7
1.6341
.6015.2
1.1027.9
.9423.8
.6917.5 _ _7GB9-x-LK 1.0 1.79
45.41.6341.4 _ _7AB9-x-LK 3.3 1.71
43.41.5539.3
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
7GC 3.8196.8 7AC 3.81
96.83
76.23.6392.1
2.4461.9
5/8 - 11 1.4436.5
.4411.1
.5313..5
1.0627.0
1.3834.9
5/8 - 11 .5012.7
1.7544
.6616.8
1.1629.5
.9423.8
.6917.5 _ _7GC9-x-LK 1.2 1.85
46.91.6341.4 _ _7AC9-x-LK 3.3 1.77
44.91.5539.3
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
7GD 4.38111.1 7AD 4.38
111.13.588.9
4.13104.8
2.7569.9
3/4 - 10 1.6341.3
.389.5
.5313.5
1.1629.4
1.6341.3
3/4 - 10 .5012.7
2.050
.8020.2
1.3032.9
.9925.1
.8220.7 _ _7GD9-x-LK 1.9 2.11
53.51.845.7 _ _7AD9-x-LK 5.1 2.03
51.51.7343.9
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
7GE 4.81122.2 7AE 4.81
122.23.588.9
4.13104.8
376.2
3/4 - 10 1.6341.3
.389.5
.5313.5
1.1629.4
1.6341.3
3/4 - 10 .5012.7
2.2557
.9724.6
1.4737.3
125.4
.8220.7 _ _7GE9-x-LK 2.4 2.28
57.91.8145.9 _ _7AE9-x-LK 5.8 2.21
56.11.7444.1
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
7GF 5.5139.7 7AF 5.5
139.74
101.64.5
114.33.4487.3 1 - 8 1.94
49.2.5614.3
.6917.5
1.538.1
1.9449.2 1 - 8 .50
12.72.3860
1.0125.6
1.5138.3
1.0927.8
.9724.6 _ _7GF9-x-LK 3.6 2.44
61.92.0351.5 _ _7AF9-x-LK 8.8 2.44
61.92.0351.5
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
7GG 5.69144.5 7AG 5.69
144.5 4
101.64.63117.5
3.588.9 1 - 8 1.94
49.2.5614.3
.6917.5
1.538.1
1.9449.2 1 - 8 .63
15.92.7570
1.0727.2
1.6943
1.2231
.9724.6 _ _7GG9-x-LK 4.2 2.63
66.82.1654.8 _ _7AG9-x-LK 9.4 2.63
66.82.1654.8
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
7GH 5.81147.6 7AH 5.81
147.6 4
101.64.75120.7
3.5690.5 1 - 8 1.94
49.2.5614.3
.6917.5
1.538.1
1.9449.2 1 - 8 .63
15.93.076
1.0727.2
1.6943
1.2231
.9724.6 _ _7GH9-x-LK 4.4 2.63
66.82.1654.8 _ _7AH9-x-LK 10.0 2.63
66.82.1654.8
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
7GI 7.5190.5 7AI 7.5
190.55.13130.2
5.75149.2
4.69119.1 11/4 - 7
2.563.5
.7218.3
1.0627.0
1.9750.0
2.563.5 11/4 - 7
.6315.9
3.2583
1.2231.1
1.8547
1.2531.8
1.2531.8 _ _7GI9-x-LK 7.1 3.1
78.72.563.5 _ _7AI9-x-LK 15.3 2.84
72.12.2456.8
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
7GJ 7.5190.5 7AJ 7.5
190.55.13130.2
5.88149.2
4.69119.1 11/4 - 7
2.563.5
.7218.3
1.0627.0
1.9750.0
2.563.5 11/4 - 7
.6315.9
3.486
1.4436.5
2.0652.4
1.2832.5
1.2531.8 _ _7GJ9-x-LK 7.6 3.31
84.02.5364.2 _ _7AJ9-x-LK 18.2 3.05
77.42.2757.6
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
-- -- 7AK 8.88225.4
5.94150.8
6.69169.9
5.38136.5 11/2 - 6
2.8873.0
.8120.6
1.0627.0
2.3158.7
2.7569.9 11/2 - 6
.7519.1
3.896
1.3534.3
2.1053.3
1.5038.1
1.3835 -- -- 3.48
88.32.8873.1 _ _7AK9-x-LK 21.1 3.09
78.42.4963.2
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
7GL 9.13231.8 7AL 9.13
231.85.94150.8
6.69169.9
5.5139.7 11/2 - 6
2.8873.0
.8120.6
1.0627.0
2.3158.7
2.7569.9 11/2 - 6
.7519.1
4.10104.1
1.2932.7
2.0451.8
1.5639.7
1.3835 _ _7GL9-x-LK 10.9 3.41
86.62.9474.6 _ _7AL9-x-LK 22.3 3.02
76.72.5564.7
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
Wide Slot Take-UpPolymer or Stainless “7” Series Wide Slot Take-Up Housing
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 27
x = Shaft Size mm∅Inch∅Ring
Group
Polymer (KG) Stainless (SS)
P V Z
Y
N W U R T
DoubleLock® Sleeve
B A E G
Wide Slot Take-Up Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
Polymer (KG) Stainless (SS)
Q Q F K
Assembly p/nWtlbs
MA MB
Assembly p/nWtlbs
MA MB
mm in 16thsHousing
p/nin
mmHousing
p/nin
mmin
mmin
mmin
mm Nut Sizein
mmin
mmin
mmin
mmin
mmThread
Sizein
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm12
15
17
1/29/165/8
11/16
891011
401.575
203A
-- -- 7AG 3..1379.5
2.563.5
376.2
250.8
1/2 - 13 1.2531.8
.317.9
.4110.3
.8120.6
125.4
1/2 - 13 .4411.2
1.4938
.6015.2
1.0426.4
.7519.1
.512.2 -- -- 1.6
40.61.3133.2 _ _7AA9-x-LK -- 1.53
38.81.2431.4
_ _BUAO-xZALUA6-x-LK_ _IUA9-x-LK
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
7GB 3.6993.7 7AB 3.69
93.73
76.23.6392.1
2.3860.3
5/8 - 11 1.4436.5
.4411.1
.5313.5
1.0627.0
1.3834.9
5/8 - 11 .5012.7
1.6341
.6015.2
1.1027.9
.9423.8
.6917.5 _ _7GB9-x-LK 1.0 1.79
45.41.6341.4 _ _7AB9-x-LK 3.3 1.71
43.41.5539.3
_ _BUBO-xZALUB6-x-LK_ _IUB9-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
7GC 3.8196.8 7AC 3.81
96.83
76.23.6392.1
2.4461.9
5/8 - 11 1.4436.5
.4411.1
.5313..5
1.0627.0
1.3834.9
5/8 - 11 .5012.7
1.7544
.6616.8
1.1629.5
.9423.8
.6917.5 _ _7GC9-x-LK 1.2 1.85
46.91.6341.4 _ _7AC9-x-LK 3.3 1.77
44.91.5539.3
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
7GD 4.38111.1 7AD 4.38
111.13.588.9
4.13104.8
2.7569.9
3/4 - 10 1.6341.3
.389.5
.5313.5
1.1629.4
1.6341.3
3/4 - 10 .5012.7
2.050
.8020.2
1.3032.9
.9925.1
.8220.7 _ _7GD9-x-LK 1.9 2.11
53.51.845.7 _ _7AD9-x-LK 5.1 2.03
51.51.7343.9
_ _BUDO-xZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
7GE 4.81122.2 7AE 4.81
122.23.588.9
4.13104.8
376.2
3/4 - 10 1.6341.3
.389.5
.5313.5
1.1629.4
1.6341.3
3/4 - 10 .5012.7
2.2557
.9724.6
1.4737.3
125.4
.8220.7 _ _7GE9-x-LK 2.4 2.28
57.91.8145.9 _ _7AE9-x-LK 5.8 2.21
56.11.7444.1
_ _BUEO-xZALUE6-x-LK_ _IUE9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
7GF 5.5139.7 7AF 5.5
139.74
101.64.5
114.33.4487.3 1 - 8 1.94
49.2.5614.3
.6917.5
1.538.1
1.9449.2 1 - 8 .50
12.72.3860
1.0125.6
1.5138.3
1.0927.8
.9724.6 _ _7GF9-x-LK 3.6 2.44
61.92.0351.5 _ _7AF9-x-LK 8.8 2.44
61.92.0351.5
_ _BUFO-xZALUF6-x-LK_ _IUF9-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
7GG 5.69144.5 7AG 5.69
144.5 4
101.64.63117.5
3.588.9 1 - 8 1.94
49.2.5614.3
.6917.5
1.538.1
1.9449.2 1 - 8 .63
15.92.7570
1.0727.2
1.6943
1.2231
.9724.6 _ _7GG9-x-LK 4.2 2.63
66.82.1654.8 _ _7AG9-x-LK 9.4 2.63
66.82.1654.8
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
7GH 5.81147.6 7AH 5.81
147.6 4
101.64.75120.7
3.5690.5 1 - 8 1.94
49.2.5614.3
.6917.5
1.538.1
1.9449.2 1 - 8 .63
15.93.076
1.0727.2
1.6943
1.2231
.9724.6 _ _7GH9-x-LK 4.4 2.63
66.82.1654.8 _ _7AH9-x-LK 10.0 2.63
66.82.1654.8
_ _BUHO-xZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
7GI 7.5190.5 7AI 7.5
190.55.13130.2
5.75149.2
4.69119.1 11/4 - 7
2.563.5
.7218.3
1.0627.0
1.9750.0
2.563.5 11/4 - 7
.6315.9
3.2583
1.2231.1
1.8547
1.2531.8
1.2531.8 _ _7GI9-x-LK 7.1 3.1
78.72.563.5 _ _7AI9-x-LK 15.3 2.84
72.12.2456.8
_ _BUIO-xZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
7GJ 7.5190.5 7AJ 7.5
190.55.13130.2
5.88149.2
4.69119.1 11/4 - 7
2.563.5
.7218.3
1.0627.0
1.9750.0
2.563.5 11/4 - 7
.6315.9
3.486
1.4436.5
2.0652.4
1.2832.5
1.2531.8 _ _7GJ9-x-LK 7.6 3.31
84.02.5364.2 _ _7AJ9-x-LK 18.2 3.05
77.42.2757.6
_ _BUJO-xZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
-- -- 7AK 8.88225.4
5.94150.8
6.69169.9
5.38136.5 11/2 - 6
2.8873.0
.8120.6
1.0627.0
2.3158.7
2.7569.9 11/2 - 6
.7519.1
3.896
1.3534.3
2.1053.3
1.5038.1
1.3835 -- -- 3.48
88.32.8873.1 _ _7AK9-x-LK 21.1 3.09
78.42.4963.2
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
7GL 9.13231.8 7AL 9.13
231.85.94150.8
6.69169.9
5.5139.7 11/2 - 6
2.8873.0
.8120.6
1.0627.0
2.3158.7
2.7569.9 11/2 - 6
.7519.1
4.10104.1
1.2932.7
2.0451.8
1.5639.7
1.3835 _ _7GL9-x-LK 10.9 3.41
86.62.9474.6 _ _7AL9-x-LK 22.3 3.02
76.72.5564.7
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
All-Round® Solution® Wide Slot Take-Up“7” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QB7GE9-20-LKSample p/n QB7AE9-23-LKView A View B
Page 28 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
x = Shaft Size mm∅Inch∅Ring
GroupSS Housing
p/n
T Z V Q R W
DoubleLock® Sleeve
B A E MA MB
Hanger Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
F K Stainless (SS)
mm in 16ths Threadin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm Assembly Wtlbs
12
15
17
1/29/165/8
11/16
891011
401.575203A
8AA8AA-018AA-03B8AA-01A
1/2 - 14 NPSM5/8 - 11 UNCM12 x 1.75
5/8 - 18
1.8847.6
2..9474.6
2.1354.0
1.1930.2
.6315.9
0.4411.2
1.4938
.6015.2
1.0426.4
.7519.1
1.6341.5
1.3434.1
_ __ _8AA9-x-LK_ __ _8AA-019-x-LK_ __ _8AA-03B9-x-LK_ __ _8AA-01A9-x-LK
1.2_ _BUAO-x
ZALUA6-x-LK_ _IUA9-x-LK
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
8AB8AB-038AB-03B
3/4 - 14 NPSM5/8 - 11 UNC
M16-2
2.563.5
3.7595.2
2.563.5
1.4436.5
.7519.1
.5012.7
1.6341
.6015.2
1.1027.9
.9423.8
1.8146.2
1.6542.0
_ _8AB9-x-LK_ _8AB-039-x-LK_ _8AB-03B9-x-LK
2.3_ _BUBO-x
ZALUB6-x-LK_ _IUB9-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
8AC 3/4 - 14 NPSM 2.563.5
3.8898.4
2.7569.9
1.4436.5
.7519.1
.5012.7
1.7544
.6616.8
1.1629.5
.9423.8
1.8847.8
1.6542.0 _ _8AC9-x-LK 2.6
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
8AD8AD-028AD-03
3/4 - 14 NPSM5/8 - 11 UNC
M16-2
2.563.5
4.06103.2
3.1379.4
1.4436.5
.7519.1
.5012.7
2.050
.8020.2
1.3032.9
.9925.1
2.0151.2
1.7043.4
_ _8AD9-x-LK_ _8AD-029-x-LK_ _8AD-039-x-LK
3.0_ _BUDO-x
ZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
8AE8AE-018AE-02
3/4 - 14 NPSM1 - 8 UNC
5/8 - 11 NPSM
2.7569.9
4.56115.9
3.6392.1
1.4436.5
.7519.1
.5012.7
2.2557
.9724.6
1.4737.3
125.4
2.1855.6
1.7143.6
_ _8AE9-x-LK_ _8AE-019-x-LK_ _8AE-029-x-LK
4.2_ _BUEO-x
ZALUE6-x-LK_ _IUE9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
8AF8AF-01
3/4 - 14 NPSM 3/4 - 10 NPSM
2.8873.0
4.75120.7
3.7595.2
1.4436.5
.7519.1
.5012.7
2.3860
1.0125.6
1.5138.3
1.0927.8
2.2256.5
1.8146.0
_ _8AF9-x-LK_ _8AF-019-x-LK
4.7_ _BUFO-x
ZALUF6-x-LK_ _IUF9-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
8AG 1 - 111/2 NPSM 3.2582.6
5.38136.5
4.25108.0
1.8847.6
.8120.6
.6315.9
2.7570
1.0727.2
1.6943
1.2231
2.6366.8
2.1554.7 _ _8AG9-x-LK 7.2
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
8AH8AH-01
1 - 111/4 NPSM1 - 8 UNC
3.2582.6
5.5139.7
4.5114.3
1.8847.6
.8120.6
.6315.9
3.076
1.0727.2
1.6943
1.2231
2.6366.8
2.1554.7
_ _8AH9-x-LK_ _8AH-019-x-LK
7.7_ _BUHO-x
ZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
8AI8AI-01
11/4 - 111/4 NPSM11/4 - 7 UNC
3.4487.3
5.94150.8
5127.0
250.8
125.4
.6315.9
3.2583
1.2231.1
1.8547
1.2531.8
2.8372.0
2.2356.7
_ _8AI9-x-LK_ _8AI-019-x-LK
10.1_ _BUIO-x
ZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
8AJ8AJ-01
11/4 - 111/2 NPSM1 1/2 - 6 UNC
4101.6
6.81173.0
5.63142.9
250.8
1.1328.6
.6315.9
3.486
1.4436.5
2.0652.4
1.2832.5
3.0477.4
2.2657.5
_ _8AJ9-x-LK_ _8AJ-019-x-LK
11.4_ _BUJO-x
ZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
8AK 11/2 - 111/2 NPSM 4.63117.5
7.88200.0
6.5165.1
250.8
1.2531.8
.7519.1
3.896
1.3534.3
2.1053.3
1.5038.1
3.3384.7
2.7369.4 _ _8AK9-x-LK 14
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
8AL 11/2 - 111/2 NPSM 4.63117.5
7.88200.0
6.5165.1
250.8
1.2531.8
.7519.1
4.13105
1.2932.7
2.0451.8
1.5639.7
3.2783.1
2.7971.0 _ _8AL9-x-LK 14.5
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
80
2-3/42-7/8
2-15/163
3-1/83-3/16
444647485051
1405.511216M
8AM 11/2 - 111/2 NPSM 4.88123.9
8.31211.1
6.88174.7
2.2256.4
1.2531.8
.7519.1
4.1104.1
1.5138.4
2.2657.4
1.5940.4
3.3785.5
2.768.5 _ _8AM9-x-LK 17.9
_ _BUMO-xZALUM6-x-LK_ _IUM9-x-LK
HangerStainless “8” Series Hanger Housing
Sample p/n 8AE-01
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 29
x = Shaft Size mm∅Inch∅Ring
GroupSS Housing
p/n
T Z V Q R W
DoubleLock® Sleeve
B A E MA MB
Hanger Assembly Polymer Bearing
DoubleLock®
Sleeve
All-Round® Assembly
F K Stainless (SS)
mm in 16ths Threadin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm Assembly Wtlbs
12
15
17
1/29/165/8
11/16
891011
401.575203A
8AA8AA-018AA-03B8AA-01A
1/2 - 14 NPSM5/8 - 11 UNCM12 x 1.75
5/8 - 18
1.8847.6
2..9474.6
2.1354.0
1.1930.2
.6315.9
0.4411.2
1.4938
.6015.2
1.0426.4
.7519.1
1.6341.5
1.3434.1
_ __ _8AA9-x-LK_ __ _8AA-019-x-LK_ __ _8AA-03B9-x-LK_ __ _8AA-01A9-x-LK
1.2_ _BUAO-x
ZALUA6-x-LK_ _IUA9-x-LK
12
15
17
20
1/29/165/8
11/163/4
89
101112
471.850204B
8AB8AB-038AB-03B
3/4 - 14 NPSM5/8 - 11 UNC
M16-2
2.563.5
3.7595.2
2.563.5
1.4436.5
.7519.1
.5012.7
1.6341
.6015.2
1.1027.9
.9423.8
1.8146.2
1.6542.0
_ _8AB9-x-LK_ _8AB-039-x-LK_ _8AB-03B9-x-LK
2.3_ _BUBO-x
ZALUB6-x-LK_ _IUB9-x-LK
25
3/413/167/8
15/161
1213141516
522.047205C
8AC 3/4 - 14 NPSM 2.563.5
3.8898.4
2.7569.9
1.4436.5
.7519.1
.5012.7
1.7544
.6616.8
1.1629.5
.9423.8
1.8847.8
1.6542.0 _ _8AC9-x-LK 2.6
_ _BUCO-xZALUC6-x-LK_ _IUC9-x-LK
30
11-1/161-1/8
1-3/161-1/4
1617181920
622.441206D
8AD8AD-028AD-03
3/4 - 14 NPSM5/8 - 11 UNC
M16-2
2.563.5
4.06103.2
3.1379.4
1.4436.5
.7519.1
.5012.7
2.050
.8020.2
1.3032.9
.9925.1
2.0151.2
1.7043.4
_ _8AD9-x-LK_ _8AD-029-x-LK_ _8AD-039-x-LK
3.0_ _BUDO-x
ZALUD6-x-LK_ _IUD9-x-LK
35
1-3/161-1/41-5/161-3/81-7/16
1920212223
722.835207E
8AE8AE-018AE-02
3/4 - 14 NPSM1 - 8 UNC
5/8 - 11 NPSM
2.7569.9
4.56115.9
3.6392.1
1.4436.5
.7519.1
.5012.7
2.2557
.9724.6
1.4737.3
125.4
2.1855.6
1.7143.6
_ _8AE9-x-LK_ _8AE-019-x-LK_ _8AE-029-x-LK
4.2_ _BUEO-x
ZALUE6-x-LK_ _IUE9-x-LK
40
1-7/161-1/21-9/161-5/8
23242526
803.150208F
8AF8AF-01
3/4 - 14 NPSM 3/4 - 10 NPSM
2.8873.0
4.75120.7
3.7595.2
1.4436.5
.7519.1
.5012.7
2.3860
1.0125.6
1.5138.3
1.0927.8
2.2256.5
1.8146.0
_ _8AF9-x-LK_ _8AF-019-x-LK
4.7_ _BUFO-x
ZALUF6-x-LK_ _IUF9-x-LK
45
1-1/21-5/81-11/161-3/4
24262728
853.346209G
8AG 1 - 111/2 NPSM 3.2582.6
5.38136.5
4.25108.0
1.8847.6
.8120.6
.6315.9
2.7570
1.0727.2
1.6943
1.2231
2.6366.8
2.1554.7 _ _8AG9-x-LK 7.2
_ _BUGO-xZALUG6-x-LK_ _IUG9-x-LK
50
1-11/161-3/4
1-13/161-7/8
1-15/162
272829303132
903.543210H
8AH8AH-01
1 - 111/4 NPSM1 - 8 UNC
3.2582.6
5.5139.7
4.5114.3
1.8847.6
.8120.6
.6315.9
3.076
1.0727.2
1.6943
1.2231
2.6366.8
2.1554.7
_ _8AH9-x-LK_ _8AH-019-x-LK
7.7_ _BUHO-x
ZALUH6-x-LK_ _IUH9-x-LK
55
1-15/162
2-1/162-1/8
2-3/162-1/4
313233343536
1003.937211I
8AI8AI-01
11/4 - 111/4 NPSM11/4 - 7 UNC
3.4487.3
5.94150.8
5127.0
250.8
125.4
.6315.9
3.2583
1.2231.1
1.8547
1.2531.8
2.8372.0
2.2356.7
_ _8AI9-x-LK_ _8AI-019-x-LK
10.1_ _BUIO-x
ZALUI6-x-LK_ _IUI9-x-LK
60
2-3/162-1/42-5/162-3/8
2-7/16
3536373839
1104.331212J
8AJ8AJ-01
11/4 - 111/2 NPSM1 1/2 - 6 UNC
4101.6
6.81173.0
5.63142.9
250.8
1.1328.6
.6315.9
3.486
1.4436.5
2.0652.4
1.2832.5
3.0477.4
2.2657.5
_ _8AJ9-x-LK_ _8AJ-019-x-LK
11.4_ _BUJO-x
ZALUJ6-x-LK_ _IUJ9-x-LK
70
2-7/162-1/22-5/8
2-11/162-3/4
3940424344
1254.921214K
8AK 11/2 - 111/2 NPSM 4.63117.5
7.88200.0
6.5165.1
250.8
1.2531.8
.7519.1
3.896
1.3534.3
2.1053.3
1.5038.1
3.3384.7
2.7369.4 _ _8AK9-x-LK 14
_ _BUKO-xZALUK6-x-LK_ _IUK9-x-LK
75
2-11/162-3/4
2-13/162-7/8
2-15/163
434445464748
1305.118215L
8AL 11/2 - 111/2 NPSM 4.63117.5
7.88200.0
6.5165.1
250.8
1.2531.8
.7519.1
4.13105
1.2932.7
2.0451.8
1.5639.7
3.2783.1
2.7971.0 _ _8AL9-x-LK 14.5
_ _BULO-xZALUL6-x-LK_ _IUL9-x-LK
80
2-3/42-7/8
2-15/163
3-1/83-3/16
444647485051
1405.511216M
8AM 11/2 - 111/2 NPSM 4.88123.9
8.31211.1
6.88174.7
2.2256.4
1.2531.8
.7519.1
4.1104.1
1.5138.4
2.2657.4
1.5940.4
3.3785.5
2.768.5 _ _8AM9-x-LK 17.9
_ _BUMO-xZALUM6-x-LK_ _IUM9-x-LK
All-Round® Solution® Hanger “8” Series Housing with All-Round® Spherical Bearing Insert
Sample p/n QB8AC9-1-LKView A View B
Page 30 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Successful All-Round® Applications
Malt House Germination Tank Mixer Augers
� All-Round® stainless insert helps dissipate heat to maximize polymer bearing longevity
� QF polymer withstands abrasion of grain and process moisture
� Eliminate grease and corrosion
� HACCP friendly
� Unaffected by washdown
Packing Line Timing Belt Conveyor (Sprocket Flat Belt)
� All-Round® offers excellent cost to performance!
� Faster dissipation of heat may be advantageous to performance - check with EDT for applications assistance
� HACCP friendly
� Unaffected by washdown
Consider plane bearings for any location where ball bearings don’t perform as reliably as desired, especially in areas involving:
● Sanitary issues, HACCP programs ● Washdown or steam ● Exposure to processing liquids or chemicals ● Incomplete rotation or oscillating motion ● Locations difficult to regularly maintain ● High or low temperatures
Look first at Poly-Round® plane bearings (Catalog Section 1). Poly-Round® may offer extended life due to the thicker polymer profile.
However, in locations with the above considerations AND where there is a need to lower the functional PV, All-Round® plane bearings should be considered.
Examples: � High load and high heat with low speed
� Sprocket driven flat belts
� High pH environments (specify 316-ss inserts) where acidity is notable
Metal Processing Smelter and Hot Box Washer
� QF polymer is abrasion and caustic resistant
� Excellent load capacity
� Bearing operates up to 500°F/260°C without grease
Contact EDT for design or application assistance.
Cookie Dough Spreader Modular Plastic Belt
� Powdered ingredients, process moisture and washdown create a challenging location for bearings
� Plane bearings are a great option: no rolling elements and no contaminations from grease or rust
� HACCP friendly
In these locations, ball bearings are recommended instead of plane bearings
� High tension applications (V-belt drives, flat belt conveyors, urethane belts)
� High speed devices (fans, pumps, table-top conveyors)
� Overhung loads (unsupported shaft mounted gear reducers)
� Trunnion applications
CAUTION
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] ALL-ROUND® 0113 - Page 31
PLANE BEARING INSTALLATION ARBOR
* Alphabetical shaft size indicates ID will accommodate locking sleeve. These are stocked arbors; other sizes available upon request.
Install Bearing Remove Bearing
Install Bearing Remove Bearing
STANDARD FLANGED BEARING
PART # *
Group Ring
x=Shaft Diameter
Range
A B C Wt
inmm
inmm
inmm lbs
PATUAO-x
A (203)
1/2 11/16
A* 3/419.1
63/6425.0
13/1620.6 .04
PATUBO-x
B (204)
1/2 13/16
B*13/1620.6
1-1/828.6
15/1623.8 .05
PATUCO-x
C (205)
13/16 1
C* 29/3223.0
1-19/6432.9
125.4 .08
PATUDO-x
D (206)
1 1-1/4
D* 1
25.41-35/64
39.3 1-3/16
30.2 .2
PATUEO-x
E (207)
1-3/16 1-7/16
E*1-1/828.6
1-47/6444.1
1-23/6434.5 .2
PATUFO-x
F (208)
1-7/16 1-5/8
F*1-5/1633.3
1-29/3248.4
1-1/238.1 .3
PATUGO-x
G (209)
1-1/2 45mm
G*1-9/3232.5
2-3/6452.0
1-35/6439.3 .4
PATUHO-x
H (210)
1-11/16 2
H* 1-3/834.9
2-19/6458.3
1-35/6439.3 .5
PATUIO-x
I (211)
1-15/16 2-1/4
I*1-35/64
39.32-35/64
64.71-3/444.5 .7
PATUJO-x
J (212)
2-3/16 2-7/16
J* 1-29/32
48.42-47/64
69.4 2
50.8 .9
PATUKO-x
K (214)
2-7/16 70mm
K*1-29/32
48.43-3/6477.4
250.8 1.0
PATULO-x
L (215)
2-11/16 3
L* 2-1/16
52.53-1/482.5
250.8 1.2
PATUMO-x
M (216)
2-3/4 3-3/16
M* 2-21/64
58.94
101.6 2-1/452.5 1.6
Page 32 - ALL-ROUND® 0113 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Engineering Notes
Stainless/polymer plane bearings for use in high PV locations or areas where the application air temperature is lower than the bearing operating
temperature, and where a Poly-Round® bearing is not best suited
All-Round® plane bearings � Interchange with industry standard bearings � All inch and metric sizes � 316 ss locking sleeve for maximum toughness � Stainless components are one time purchase. Under
normal operating conditions only flanged polymer requires replacement
� Require no lubrication � Sanitary � Corrosion resistant � Predictable replacement schedule
Advantages of All-Round® bearings over other style plane bearings � Higher load capacity in radial and thrust applications � Dissipates heat better than Poly-Round® bearings in applications where the air
temperature is lower than the core of the bearing, and PV rating is critical
All-Round ®
Insert BearingsAll-Round®
ER Bearings
ALL-ROUND® STAINLESS STEEL BEARINGS
RED 0613EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] D-1
All-Round® Solution® Ultimate Solution®
Now featuring
KleanCap™ DoubleLock® sleeves
� More Sanitary
� Easier Installation
D-2 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
ALL-ROUND® BEARINGSSolve Your Toughest Bearing and Shaft Problems
SPHERICAL SERIES
ER SERIES
INSERTSAll-Round® stainless steel inserts with replaceable polymer bearings are: � Maintenance free � Compatible with industry
standard insert sizes � Corrosion resistant � Cost effective � Sanitary � Predictable for operation and
wear � Long-term investments � Ideal where lubrication is difficult
to maintainUnder normal operating conditions, this unit is a one-time purchase and does not require replacement with typical bearing usage.
POLYMER BEARINGSAll-Round® polymer bearings are thin-walled, flanged plane bearings for use with All-Round® stainless inserts.They can also be used separately as bearing replacements in idler gears and sprockets and in other stand-alone applications.A variety of bearing materials are available to suit different applications.
See Material Selection Chart, page D-3.
LOCKING SLEEVESPurposes: � Repair damaged shafts � Extend bearing life � Eliminate shaft damage from plane
bearing wear � Control lateral shaft movement
within the bearingFeatures: � 316 SS for maximum wear and
corrosion resistance � Optional hardened materials
available for extreme abrasion applications
� Available in a range of standard lengths and custom sizes
DoubleLock® sleeves have twice the grip and staying power of setscrew locking sleeves.Locking sleeves can be used with all EDT bearing products. See Polymer Block Bearings Section H (GREEN) and Poly-Round® Bearings Section B (AMBER).
EDT’s QB material can be used in 90% of All-Round® applications. QB polymer is: � Versatile � High performing � Extreme temperature resistant � Cost effective � USDA meat and poultry accepted
(incidental) � USDA dairy accepted (incidental) � Completely void of animal fats for
Kosher certified processing
NOTE: In submerged locations, QF polymer is recommended.
RED 0613
Applications not suitable for plane bearings (see Section K for substitution) � High tension applications (V-belt drives, flat belt conveyors, urethane belts) � High speed devices (fans, pumps, table-top conveyors) � Overhung loads (shaft-mounted gear reducers) � Trunnion applications
Use ball bearing instead of All-Round® or Poly-Round® bearing (see section F)
Use Poly-Round® bearing instead of All-Round® (see section B)
� In temperatures below 0°F /-18 C � Repeat thermal cycles
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] D-3
ALL-ROUND® BEARINGS OFFER INSTALLATION VERSATILITY
In any configuration, the locking sleeve collar must run against the flange of the polymer bearing to prevent metal-to-metal contact and heat buildup. Full mounting and installation instructions for all
EDT bearings are located in the User Handbook, Section O (PURPLE).
All-Round® bearings can be mounted horizontally or vertically.
They can also be assembled in different ways to adjust the total length-thru-bore (LTB) of a mounted set.
Bearing capacity is measured by PV and will determine the amount of heat generated in a plane bearing. PV is the relationship of the load to the shaft speed in a bearing. Factors influencing PV limits (heat generation) include: � Material selection � Journal surface finish � Bearing wall thickness � Running clearance � Proximity to moisture � Ambient temperature � Cycle time
HOW TO CALCULATE PV
PV - P x V
P - pressure in PSI (lbs/sq in)
V - velocity in SFM (surface ft/min)
P - F/A where F = force (load) on bearing A = shaft dia (in) x LTB (LTB = bearing length through the bore)
V - .262 x D x RPM where D = shaft diameter (in) RPM = shaft revolutions/min
Material Section Chart
Poly-Round® Bearing Materials PV Limit*
Maximum Speed
V (SFM)
Maximum Loading P (PSI)
Continuous Operating
Temp.
Performance in Moisture∆ T
Dimensional Stability
with Temp Change
Chemical Resistance
Abrasion Resistance
Impact Resistance
USDA/FDA Contact ApprovalWashdown Submerged
Bear
ings
PA UHMWwhite 1,000 50 800 150°F Excellent Excellent Poor Excellent
Abrasion applications
are very non-predictable.
Each application
must be tested for abrasion resistance.
Excellent Direct
NAgray
6,000 350 2,000 200°F Excellent Good Fair Good Excellent Incidental
QBblack-green 50,000 400 3,000 500°F Excellent Poor Excellent Fair Fair Incidental
QFblack
60,000 400 6,000 450°F Excellent Excellent Excellent Excellent Fair Incidental
MYblack
20,000 100 800°F Fair Fair Excellent Fair Good No
* PV limits are shown for unlubricated radial bearing applications. Low temperature or submerged installation may permit PV limits up to 2x higher.
RED 0613
D-4 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
ALL-ROUND® SPHERICAL BEARING ASSEMBLYStainless / Polymer Insert Bearings – Setscrew Locking Sleeve
O.D. E
D
C
VIEW - B
EO.D.
B
A
VIEW - AAssembly A Assembly B
RED 0613
Units are shipped from the factory as shown in “Assembly A” configuration. You can specify “Assembly B” assembly to reduce the length thru bore.
PART #
Group Ring
x=Shaft Diameter OD A B C D E P L Wt
mm inin
mmin
mmin
mmin
mmin
mmin
mmReplacement Polymer
Flanged Bearing Part #Locking Sleeve
Part #lbs
QBIUA9-x
A (203)1.575 40
121517
1/29/165/8
11/16
1.57540
63/6425.0
3/89.5
25/3219.8
9/1614.3
1-1/828.6 QBBUAO-A ZALUA6-x .4
QBIUB9-x
B (204)1.850 47
12151720
1/29/165/8
11/163/4
13/16
1.85047
63/6425.0
1/212.7
59/6423.4
9/1614.3
1-1/431.8 QBBUBO-B ZALUB6-x .5
QBIUC9-x
C (205)2.047 52 25
3/413/167/8
15/161
2.04752
1-3/6426.6
1/212.7
59/6423.4
5/815.9
1-1/238.1 QBBUCO-C ZALUC6-x .7
QBIUD9-x
D (206)2.441 62 30
11-1/161-1/81-3/161-1/4
2.44162
1-19/6432.9
35/6413.9
1-5/6427.4
3/419.1
1-3/444.5 QBBUDO-D ZALUD6-x 1.1
QBIUE9-x
E (207)2.835 72 35
1-3/161-1/41-5/161-3/81-7/16
2.83572
1-31/6437.7
9/1614.3
1-7/6428.2
15/1623.8
250.8 QBBUEO-E ZALUE6-x 1.7
QBIUF9-x
F (208)3.150 80 40
1-7/161-1/21-9/161-5/8
3.15080
1-37/6440.1
21/3216.7
1-17/6432.1
31/3224.6
2-1/457.2 QBBUFO-F ZALUF6-x 2.5
QBIUG9-x
G (209)3.346 85 45
1-1/21-5/8
1-11/161-3/4
3.34685
1-41/6441.7
21/3216.7
1-17/6432.1
1-1/3226.2
2-1/263.5 QBBUGO-G ZALUG6-x 3.0
QBIUH9-x
H (210)3.543 90 50
1-11/161-3/4
1-13/161-7/8
1-15/162
3.54390
1-41/6441.7
21/3216.7
1-17/6432.1
1-1/3226.2
2-11/1668.3 QBBUHO-H ZALUH6-x 3.3
QBIUI9-x
I (211)3.937 100 55
1-15/162
2-1/162-1/82-3/162-1/4
3.937100
1-51/6445.6
11/1617.5
1-19/6432.9
1-3/1630.2
2-7/873.0 QBBUIO-I ZALUI6-x 4.5
QFIUJ9-x
J (212)4.331 110 60
2-3/162-1/42-5/162-3/82-7/16
4.331110
2-1/6451.2
23/3218.3
1-21/6433.7
1-13/3235.7
376.2 QFBUJO-J ZALUJ6-x 5.2
QFIUK9-x
K (214)4.921 125 70
2-7/162-1/22-5/8
2-11/162-3/4
4.921125
2-7/6453.6
13/1620.6
1-39/6440.9
1-5/1633.3
4101.6 QFBUKO-K ZALUK6-x 7.1
QFIUL9-x
L (215)5.118 130 75
2-11/162-3/4
2-13/162-7/8
2-15/163
5.118130
2-3/6452.0
7/822.2
1-43/6442.5
1-1/431.8
4101.6 QFBULO-L ZALUL6-x 7.3
QFIUM9-x
M (216)5.511 140 80
2-15/163
3-1/83-3/16
5.511140
2-17/6457.4
29/3222.9
1-11/1642.9
1-15/3237.3
4-1/2114.3 QFBUMO-M ZALUM6-x 10.1
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] D-5
ALL-ROUND® SPHERICAL BEARING ASSEMBLYStainless / Polymer Insert Bearings – DoubleLock® Sleeve
O.D. E
C
D
VIEW - B
O.D. E
A
B
VIEW - AAssembly A Assembly B
RED 0613
PART #
Group Ring
x=Shaft Diameter OD A B C D E Clamping
screws 2 each SHCS
P N Wt
mm inin
mmin
mmin
mmin
mmin
mmin
mmReplacement Polymer
Flanged Bearing Part #DoubleLock®
Part #lbs
QBIUA9-x-LC
A (203)1.575 40
121517
1/29/165/8
11/16
1.57540
1.1428.7
3/89.5
.9423.9
9/1614.3
1.4938 10-32 QBBUAO-A ZALUA6-x-LC .4
QBIUB9-x-LC
B (204)1.850 47
12151720
1/29/165/8
11/163/4
13/16
1.85047
1.1128.2
1/212.7
1.0426.5
9/1614.3
1.6340 1/4-28 QBBUBO-B ZALUB6-x-LC .5
QBIUC9-x-LC
C (205)2.047 52 25
3/413/167/8
15/161
2.04752
1.1729.9
1/212.7
1.0526.7
5/815.9
1.7543 1/4-28 QBBUCO-C ZALUC6-x-LC .7
QBIUD9-x-LC
D (206)2.441 62 30
11-1/161-1/81-3/161-1/4
2.44162
1.3233.5
35/6413.9
1.1027.9
3/419.1
2.049 1/4-28 QBBUDO-D ZALUD6-x-LC 1.1
QBIUE9-x-LC
E (207)2.835 72 35
1-3/161-1/41-5/161-3/81-7/16
2.83572
1.4837.7
9/1614.3
1.1128.2
15/1623.8
2.2555 1/4-28 QBBUEO-E ZALUE6-x-LC 1.7
QBIUF9-x-LC
F (208)3.150 80 40
1-7/161-1/21-9/161-5/8
3.15080
1.6341.6
21/3216.7
1.3233.5
31/3224.6
2.3858 1/4-28 QBBUFO-F ZALUF6-x-LC 2.5
QBIUG9-x-LC
G (209)3.346 85 45
1-1/21-5/8
1-11/161-3/4
3.34685
1.743.2
21/3216.7
1.3233.5
1-1/3226.2
2.7567 5/16-24 QBBUGO-G ZALUG6-x-LC 3.0
QBIUH9-x-LC
H (210)3.543 90 50
1-11/161-3/4
1-13/161-7/8
1-15/162
3.54390
1.743.2
21/3216.7
1.3233.5
1-1/3226.2
3.074 5/16-24 QBBUHO-H ZALUH6-x-LC 3.3
QBIUI9-x-LC
I (211)3.937 100 55
1-15/162
2-1/162-1/82-3/162-1/4
3.937100
1.8548.2
11/1617.5
1.3534.4
1-3/1630.2
3.2580 5/16-24 QBBUIO-I ZALUI6-x-LC 4.5
QFIUJ9-x-LC
J (212)4.331 110 60
2-3/162-1/42-5/162-3/82-7/16
4.331110
2.0752.7
23/3218.3
1.3935.2
1-13/3235.7
3.483 5/16-24 QFBUJO-J ZALUJ6-x-LC 5.2
QFIUK9-x-LC
K (214)4.921 125 70
2-7/162-1/22-5/8
2-11/162-3/4
4.921125
2.154.6
13/1620.6
1.6140.9
1-5/1633.3
3.893 3/8-24 QFBUKO-K ZALUK6-x-LC 7.1
QFIUL9-x-LC
L (215)5.118 130 75
2-11/162-3/4
2-13/162-7/8
2-15/163
5.118130
2.0452.0
7/822.2
1.2531.8
1-1/431.8
4.13101 3/8-24 QFBULO-L ZALUL6-x-LC 7.3
QFIUM9-x-LC
M (216)5.511 140 80
2-15/163
3-1/83-3/16
5.511140
2.2657.4
29/3222.9
1.6842.9
1-15/3237.3
4.7120 3/8-24 QFBUMO-M ZALUM6-x-LC 10.1
D-6 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
X K I
GF
H
JA
D
E
CB
B Thru G
ALL-ROUND® ER BEARING ASSEMBLYStainless / Polymer Type ER Bearings – Setscrew Locking Sleeve
ER Equivalent
Interchange
PART #
Group Ringin —OD— mm
x=Shaft
Diameter
A B C
D E F G H I J K P M Wt
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
Replacement Polymer Flanged Bearing Part #
Locking Sleeve Part # lbs
ER-8ER-9ER-10ER-11ER-12ER-204
QBEUB9-x
B 204
1/29/165/8
11/163/4
20 mm
1.8547
.7218.3
.512.7
1.2231.0
.328.0
.6316.0
.4912.5
.041.1
2.0852.7
1.2531.8
1.2531.8 QBCUBO-B ZAMUB6-x .4
ER-13ER-14ER-15ER-16ER-205
QBEUC9-x
C 205
3/413/167/8
15/161
25 mm
2.04752
.7719.7
.5614.3
1.3333.7
.379.5
.7518.0
.6115.5
.041.1
2.2857.9
1.436.5
1.538.1 QBCUCO-C ZAMUC6-x .6
ER-17ER-18ER-19ER-20SER-206
QBEUD9-x
D 206
1-1/161-1/81-3/161-1/4
30 mm
2.4462
.8822.2
.6315.9
1.5038.1
.4311.0
.8822.2
.6817.3
.071.7
2.6767.7
1.6941.3
1.7544.5 QBCUDO-D ZAMUD6-x 1.0
ER-20ER-21ER-22ER-23ER-207
QBEUE9-x
E 207
1-1/41-5/161-3/81-7/1635 mm
2.83572
125.4
.6917.5
1.6942.9
.4712.0
.9524.0
.7519.1
.071.7
3.0978.8
1.9449.2
250.8 QBCUEO-E ZAMUE6-x 1.8
ER-24ER-25ER-208
QBEUF9-x
F 208
1-1/21-9/1640 mm
3.1580
1.1230.2
.7519.1
1.9449.2
.5514.0
1.1028.0
.9123.0
.071.7
3.4186.6
2.1354.0
2.2557.2 QBCUFO-F ZAMUF6-x 2.3
ER-26ER-27ER-28ER-209
QBEUG9-x
G 209
1-5/81-11/161-3/4
45 mm
3.3585
1.1230.2
.7519.1
1.9449.2
.5514.0
1.1028.0
.9123.1
.071.7
3.6191.6
2.2757.5
2.5063.5 QBCUGO-G ZAMUG6-x 2.5
ER-30ER-31ER-210
QBEUH9-x
H 210
1-7/81-15/1650 mm
3.5490
1.2832.6
.7519.1
2.0351.6
.5514.0
1.1028.0
.8822.3
.102.5
3.8096.5
2.5063.5
2.6968.3 QBCUHO-H ZAMUH6-x 2.5
ER-32ER-34ER-35ER-211
QBEUI9-x
I 211
22-1/82-3/1655 mm
3.97100
1.3133.4
.8822.2
2.1955.5
.5915.0
1.1830.0
.9624.3
.012.5
4.19106.5
2.8873.0
2.8873.0 QBCUIO-I ZAMUI6-x 3.5
ER-36ER-38ER-39ER-212
QFEUJ9-x
J 212
2-1/42-3/82-7/1660 mm
4.33110
1.5639.7
125.4
2.5665.1
.6316.0
1.2632.0
1.0426.4
.102.5
4.59116.6
376.2
376.2 QFCUJO-J ZAMUJ6-x 4.8
ER-40ER-43ER-214
QFEUK9-x
K 214
2-1/22-11/1670 mm
4.92125
1.6341.3
1.1328.6
2.7569.9
.6917.5
1.3834.9
1.1428.9
.112.8
5.30134.7
3.3485.7
4101.6 QFCUKO-K ZAMUK6-x 7.3
ER-46ER-47ER-215
QFEUL9-x
L 215
2-7/82-15/1675 mm
5.12130
1.7544.5
1.1729.8
2.9274.2
.7519.1
1.5038.1
1.2632.1
.112.8
5.50139.7
3.7595.2
4101.6 QFCULO-L ZAMUL6-x 7.3
“QB” indicates one bearing material; other materials available (see page D-3).-X = Setscrew locking sleeve; -x-LC = DoubleLock® locking sleeve
B thru G sizes
H thru M sizesH Thru M
All sizes include non-corrosive snap ring.204 & 205 stainless steel; other sizes nickel-plated.Interchanges with industry-standard ER bearings.
All components are available separately. See following pages this section.
RED 0613
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] D-7
ALL-ROUND® ER BEARING ASSEMBLYStainless / Polymer Type ER Bearings – DoubleLock® Sleeve
All sizes include non-corrosive snap ring.204 & 205 stainless steel; other sizes nickel-plated.Interchanges with industry-standard ER bearings.
All components are available separately. See following pages this section.
B thru G sizes
H thru M sizes
X K I
GF
H
JA
D
E
C B
B Thru G
H Thru M
ER Equivalent
Interchange
PART #
Group Ringin —OD— mm
x=Shaft
Diameter
A B C D E F G H I J K Wt
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
inmm
Replacement Polymer Flanged Bearing Part #
DoubleLock® Part # lbs
ER-8ER-9ER-10ER-11ER-12ER-204
QBEUB9-x-LC
B 204
1/29/165/8
11/163/4
20 mm
1.8547
.8822.3
.512.7
1.3835.0
.328.0
.6316.0
.4912.5
.041.1
2.0852.7
1.2531.8
1.6340 QBCUBO-B ZAMUB6-x-LC .45
ER-13ER-14ER-15ER-16ER-205
QBEUC9-x-LC
C 205
3/413/167/8
15/161
25 mm
2.04752
.922.8
.5614.3
1.4637.0
.379.5
.7518.0
.6115.5
.041.1
2.2857.9
1.436.5
1.7543 QBCUCO-C ZAMUC6-x-LC .61
ER-17ER-18ER-19ER-20SER-206
QBEUD9-x-LC
D 206
1-1/161-1/81-3/161-1/4
30 mm
2.4462
.922.8
.6315.9
1.5238.1
.4311.0
.8822.2
.6817.3
.071.7
2.6767.7
1.6941.3
2.049 QBCUDO-D ZAMUD6-x-LC .97
ER-20ER-21ER-22ER-23ER-207
QBEUE9-x-LC
E 207
1-1/41-5/161-3/81-7/1635 mm
2.83572
1.025.4
.6917.5
1.6942.9
.4712.0
.9524.0
.7519.1
.071.7
3.0978.8
1.9449.2
2.2555 QBCUEO-E ZAMUE6-x-LC 1.8
ER-24ER-25ER-208
QBEUF9-x-LC
F 208
1-1/21-9/1640 mm
3.1580
1.1829.9
.7519.1
1.1629.4
.5514.0
1.1028.0
.9123.0
.071.7
3.4186.6
2.1354.0
2.3858 QBCUFO-F ZAMUF6-x-LC 2.3
ER-26ER-27ER-28ER-209
QBEUG9-x-LC
G 209
1-5/81-11/161-3/4
45 mm
3.3585
1.1829.9
.7519.1
1.1629.4
.5514.0
1.1028.0
.9123.1
.071.7
3.6191.6
2.2757.5
2.7567 QBCUGO-G ZAMUG6-x-LC 2.5
ER-30ER-31ER-210
QBEUH9-x-LC
H 210
1-7/81-15/1650 mm
3.5490
1.3434.0
.7519.1
2.0953.0
.5514.0
1.1028.0
.8822.3
.102.5
3.8096.5
2.5063.5
3.074 QBCUHO-H ZAMUH6-x-LC 2.7
ER-32ER-34ER-35ER-211
QBEUI9-x-LC
I 211
22-1/82-3/1655 mm
3.97100
1.3734.8
.8822.2
2.2557.1
.5915.0
1.1830.0
.9624.3
.012.5
4.19106.5
2.8873.0
3.2580 QBCUIO-I ZAMUI6-x-LC 3.8
ER-36ER-38ER-39ER-212
QFEUJ9-x-LC
J 212
2-1/42-3/82-7/1660 mm
4.33110
1.6241.1
125.4
2.6266.5
.6316.0
1.2632.0
1.0426.4
.102.5
4.59116.6
376.2
3.483 QFCUJO-J ZAMUJ6-x-LC 5.0
ER-40ER-43ER-214
QFEUK9-x-LC
K 214
2-1/22-11/1670 mm
4.92125
1.6341.3
1.1328.6
2.7569.9
.6917.5
1.3834.9
1.1428.9
.112.8
5.30134.7
3.3485.7
3.893 QFCUKO-K ZAMUK6-x-LC 6.9
ER-46ER-47ER-215
QFEUL9-x-LC
L 215
2-7/82-15/1675 mm
5.12130
1.7544.5
1.1729.8
2.9274.2
.7519.1
1.5038.1
1.2632.1
.112.8
5.50139.7
3.7595.2
4.13101 QFCULO-L ZAMUL6-x-LC 7.3
RED 0613
“QB” indicates one bearing material; other materials available (see page D-3).-X = Setscrew locking sleeve; -x-LC = DoubleLock® locking sleeve
D-8 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
ALL-ROUND® SPHERICAL INSERTS304 stainless steel (316 ss or other materials optional)
D
PART #
Group Ringin —OD— mm
Insert accommodates the following shaft sizes
AOD B C D Wt
mm inin
mmin
mmin
mmin
mm lbs
ZAIUAO
A 2031.575 40 17
1/29/165/8
11/16
1.57540
1/212.7
13/1620.6
5/167.9 .2
ZAIUBO
B 2041.850 47 20
1/29/165/8
11/163/4
13/16
1.85047
1/212.7
15/1623.8
7/1611.1 .3
ZAIUCO
C 2052.047 52 25
3/413/167/8
15/161
2.04752
9/1614.3
125.4
7/1611.1 .4
ZAIUDO
D 2062.441 62 30
11-1/161-1/81-3/161-1/4
2.44162
45/6417.9
1-3/1630.2
31/6412.3 .7
ZAIUEO
E 2072.835 72 35
1-3/161-1/41-5/161-3/81-7/16
2.83572
7/822.2
1-3/834.9
1/512.7 1.0
ZAIUFO
F 2083.150 80 40
1-7/161-1/21-9/161-5/8
3.15080
29/3222.9
1-1/238.1
19/3215.2 1.6
ZAIUGO
G 2093.346 85 45
1-1/21-5/8
1-11/161-3/4
3.34685
31/3224.6
1-9/1639.7
19/3215.2 2.0
ZAIUHO
H 2103.543 90 50
1-11/161-3/4
1-13/161-7/8
1-15/162
3.54390
31/3224.6
1-9/1639.7
19/3215.2 2.1
ZAIUIO
I 2113.937 100 55
1-15/162
2-1/162-1/82-3/162-1/4
3.937100
1-1/828.6
1-3/444.5
5/815.9 2.8
ZAIUJO
J 2124.331 110 60
2-3/162-1/42-5/162-3/82-7/16
4.331110
1-11/3234.1
250.8
21/3216.7 3.9
ZAIUKO
K 2144.921 125 70
2-7/162-1/22-5/8
2-11/162-3/4
4.921125
1-1/431.8
250.8
3/419.0 5.4
ZAIULO
L 2155.118 130 75
2-11/162-3/4
2-13/162-7/8
2-15/163
5.118130
1-3/1630.2
250.8
13/1620.6 5.5
ZAIUMO
M 2165.511 140 80
2-15/163
3-1/83-3/16
5.511140
1-13/3235.7
2-1/457.2
53/6421.5 7.2
ALL-ROUND® spherical insert requires
ALL-ROUND® flanged polymer bearing for
operation. See pages D-2 and D-3.
RED 0613
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] D-9
ALL-ROUND® spherical insert requires
ALL-ROUND® flanged polymer bearing for
operation. See pages D-2 and D-3.
ALL-ROUND® CYLINDRICAL INSERTS FOR ER SERIES304 stainless steel (316 ss or other materials optional)
H
DC
G
EA
F
B
PART #
Group Ring
Insert accommodates the following shaft sizes v B C D E F G H Wt
mm inin
mmin
mmin
mmin
mmin
mmin
mmin
mmin
mm lbs
ZAEUBO
B 2041.850 47 20
1/29/165/8
11/163/4
13/16
1.85047
1/212.7
15/1623.8
.49212.5
1-1/431.8
.092.4
.0441.1
2.07552.7 .3
ZAEUCO
C 2052.047 52 25
3/413/167/8
15/161
2.04752
9/1614.3
125.4
.61015.5
1-7/1636.5
.092.4
.0441.1
2.28057.0 .40
ZAEUDO
D 2062.441 62 30
11-1/161-1/81-3/161-1/4
2.44162
45/6417.9
1-3/1630.2
.68317.3
1-11/1641.3
.133.2
.0671.7
2.66567.7 .7
ZAEUEO
E 2072.835 72 35
1-3/161-1/41-5/161-3/81-7/16
2.83572
7/822.2
1-3/834.9
.75319.1
1-61/6449.5
.133.2
.0671.7
3.09478.6 1.0
ZAEUFO
F 2083.150 80 40
1-7/161-1/21-9/161-5/8
3.15080
29/3222.9
1-1/238.1
.91023.1
2-1/854.0
.133.2
.0671.7
3.40986.6 1.5
ZAEUGO
G 2093.346 85 45
1-1/21-5/8
1-11/161-3/4
3.34685
31/3224.6
1-9/1639.7
.91023.1
2-17/6457.4
.133.2
.0671.7
3.60691.6 1.7
ZAEUHO
H 2103.543 90 50
1-11/161-3/4
1-13/161-7/8
1-15/162
3.54390
31/3224.6
1-9/1639.7
.88022.4
2-1/263.5
.133.2
.0972.5
3.79996.5 1.8
ZAEUIO
I 2113.937 100 55
1-15/162
2-1/162-1/82-3/162-1/4
3.937100
1-1/828.6
1-3/444.5
.95924.4
2-7/873.0
.133.2
.0972.5
4.193106.5 2.7
ZAEUJO
J 2124.331 110 60
2-3/162-1/42-5/162-3/82-7/16
4.331110
1-11/3234.1
250.8
1.03826.4
376.2
.133.2
.0972.5
4.591116.6 3.9
ZAEUKO
K 2144.921 125 70
2-7/162-1/22-5/8
2-11/162-3/4
4.921125
1-1/431.8
250.8
1.13928.9
3-3/885.7
.133.2
.1112.8
5.303134.7 5.3
ZAEULO
L 2155.118 130 75
2-11/162-3/4
2-13/162-7/8
2-15/163
5.118130
1-3/1630.2
250.8
1.26432.1
3-3/495.2
.133.2
.1112.8
5.500139.7 5.8
ZAEUMO
M 2165.511 140 80
2-15/163
3-1/83-3/16
5.511140
1-13/3235.7
2-1/457.2
1.38935.3
4101.6
.194.8
.1112.8
5.894149.7 7.2
RED 0613
D-10 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
ALL-ROUND® SETSCREW LOCKING SLEEVESStandard and ER Series - 316 stainless steel
Threadlocker should always be used with setscrews on locking sleeves.
Other sizes and materials are available on a custom basis.
x=Shaft Diameter
LOCKING SLEEVE STANDARD LENGTH
PART #
Group Ring
STANDARDB
LOCKING SLEEVE ER LENGTH
PART #
Group Ring
ERB
LOCKING SLEEVE -04 LENGTH
PART #
Group Ring
-04 B A C D
2 ea ss set screw
Wt
mm in inmm
inmm
inmm
inmm
inmm
inmm lbs
121517
1/29/165/8
11/16
ZALUA6-x
A (203)
1-11/3234.2
ZAMUA6-x
A (203)
1-7/6428.2
ZALUA6-x-04
A (203)
1.9249
25/3220.0
3/89.5
1-1/828.6 1/4-28 .2
12151720
1/29/165/8
11/163/4
13/16
ZALUB6-x
B (204)
1-15/3237.4
ZAMUB6-x
B (204)
1-1/431.8
ZALUB6-x-04
B (204)
2.0452
29/3223.2
3/89.5
1-1/431.8 1/4-28 .2
25
3/413/167/8
15/161
ZALUC6-x
C (205)1-17/32
39.0 ZAMUC6-x
C (205)
1-3/834.8
ZALUC6-x-04
C (205)
2.1155.5
1-3/3227.9
3/89.5
1-1/238.1 1/4-28 .2
ZALUCH-1 1.8948.0
30
11-1/161-1/81-3/161-1/4
ZALUD6-x
D (206)
1-53/6446.4
ZAMUD6-x
D (206)
1-35/6439.1
ZALUD6-x-04
D (206)
2.1253.8
1-11/3234.3
31/6411.9
1-3/444.5 3/8-24 .3
35
1-3/161-1/41-5/161-3/81-7/16
ZALUE6-x
E (207)
2-1/3251.7
ZAMUE6-x
E (207)
1-23/3243.7
ZALUE6-x-04
E (207)
2.6066.1
1-17/3239.1
1/212.7
250.8 3/8-24 .6
40
1-7/161-1/21-9/161-5/8
ZALUF6-x
F (208)
2-7/3256.4
ZAMUF6-x
F (208)
1-31/3250.0
ZALUF6-x-04
F (208)
2.7970.8
1-23/3243.8
9/1614.3
2-1/457.2 3/8-24 .6
45
1-1/21-5/8
1-11/161-3/4
ZALUG6-x
G (209)
2-9/3258.0
ZAMUG6-x
G (209)
1-61/6449.5
ZALUG6-x-04
G (209)
2.8672.6
1-7/847.5
9/1614.3
2-1/263.5 3/8-24 .9
50
1-11/161-3/4
1-13/161-7/8
1-15/162
ZALUH6-x
H (210)
2-9/3258.0
ZAMUH6-x
H (210)
2-3/6451.9
ZALUH6-x-04
H (210)
2.8672.6
2-3/3253.3
9/1614.3
2-11/1668.3 3/8-24 1.0
55
1-15/162
2-1/162-1/82-3/162-1/4
ZALUI6-x
I (211)
2-15/3262.8
ZAMUI6-x
I (211)
2-13/6455.9
ZALUI6-x-04
I (211)
3.0477.2
2-11/3259.7
9/1614.3
2-7/873.0 3/8-24 1.3
60
2-3/162-1/42-5/162-3/82-7/16
ZALUJ6-x
J (212)
2-22/3269.1
ZAMUJ6-x
J (212)
2-37/6465.3
ZALUJ6-x-04
J (212)
3.2382
2-17/3264.5
9/1614.3
376.2 3/8-24 1.3
70
2-7/162-1/22-5/8
2-11/162-3/4
ZALUK6-x
K (214)
2-29/3273.9
ZAMUJ6-x
K (214)
2-49/6470.1
ZALUK6-x-04
K (214)
3.4888.4
2-27/3272.4
3/419.1
4101.6 1/2-20 3.0
75
2-11/162-3/4
2-13/162-7/8
2-15/163
ZALUL6-x
L (215)
2-29/3273.9
ZAMUL6-x
L (215)
2-29/3273.9
ZALUL6-x-04
L (215)
3.4888.4
3-9/6479.8
3/419.1
4101.6 1/2-20 2.2
80
2-15/163
3-1/83-3/16
ZALUM6-x
M (216)
3-5/3280.3
ZALUM6-x
M (216)
3-5/3280.3
ZALUM6-x-04
M (216)
3.4888.4
3-9/3283.5
3/419.1
4-1/2114.3 1/2-20 3.0
65°
X D
CB
AShaftDiameter
E
RED 0613
ER
Standard
-04(extra length for heat expansion)
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] D-11
Threadlocker should always be used with clamping screws on locking sleeves.
Other sizes and materials are available on a custom basis.
ALL-ROUND® Doublelock® SLEEVESStandard and ER Series - 316 stainless steel
x=Shaft Diameter
Doublelock® STANDARD LENGTH
PART #
Group Ring
STD LENGTHB
Doublelock® ER LENGTH
PART #
Group Ring
ERB
Doublelock® -04 LENGTH
PART #
Group Ring
-04B A C D
2 ea SHCS
Wt
mm in inmm
inmm
inmm
inmm
inmm
inmm lbs
121517
1/29/165/8
11/16
ZALUA6-x-LC
A (203)
1.4737
ZAMUA6-x-LC
A (203)
ZALUA6-x-04-LC
A (203)
2.0752.6
0.7820.0
.4411
1.4938 1/4-28 .2
12151720
1/29/165/8
11/163/4
13/16
ZALUB6-x-LC
B (204)
1.5639
ZAMUB6-x-LC
B (204)
1.3534
ZALUB6-x-04-LC
B (204)
2.1755.1
0.9023.2
.5013
1.6341 1/4-28 .2
25
3/413/167/8
15/161
ZALUC6-x-LCC (205)
1.6341 ZAMUC6-x-LC
C (205)
1.4737
ZALUC6-x-04-LC
C (205)
2.2356.6
1.0927.9
.5013
1.7544 1/4-28 .2ZALUCH-1-LC 2.01
27.9
ZALUCH-1-LCHTV 1.6041
30
11-1/161-1/81-3/161-1/4
ZALUD6-x-LC
D (206)
1.8146
ZAMUD6-x-LC
D (206)
1.5439
ZALUD6-x-04-LC
D (206)
2.4261.5
1.3434.3
.5013
2.050 1/4-28 .4
35
1-3/161-1/41-5/161-3/81-7/16
ZALUE6-x-LC
E (207)
2.0051
ZAMUE6-x-LC
E (207)
1.6943
ZALUE6-x-04-LC
E (207)
2.6066
1.5339.1
.5013
2.2557 1/4-28 .5
40
1-7/161-1/21-9/161-5/8
ZALUF6-x-LC
F (208)
2.1354
ZAMUF6-x-LC
F (208)
1.8848
ZALUF6-x-04-LC
F (208)
2.7369.3
1.7143.8
.5013
2.3860 1/4-28 .6
45
1-1/21-5/8
1-11/161-3/4
ZALUG6-x-LC
G (209)
2.3158
ZAMUG6-x-LC
G (209)
1.9850
ZALUG6-x-04-LC
G (209)
2.9274.1
1.8747.5
.6316
2.7570 5/16-24 .8
50
1-11/161-3/4
1-13/161-7/8
1-15/162
ZALUH6-x-LC
H (210)
2.3158
ZAMUH6-x-LC
H (210)
2.0853
ZALUH6-x-04-LC
H (210)
2.9274.1
2.0953.3
.6316
3.076 5/16-24 1.1
55
1-15/162
2-1/162-1/82-3/162-1/4
ZALUI6-x-LC
I (211)
2.5064
ZAMUI6-x-LC
I (211)
2.2457
ZALUI6-x-04-LC
I (211)
3.1179.0
2.3459.7
.6316
3.2583 5/16-24 1.3
60
2-3/162-1/42-5/162-3/82-7/16
ZALUJ6-x-LC
J (212)
2.7470
ZAMUJ6-x-LC
J (212)
2.6066
ZALUJ6-x-04-LC
J (212)
3.3585.1
2.5364.5
.6316
3.486 5/16-24 1.4
70
2-7/162-1/22-5/8
2-11/162-3/4
ZALUK6-x-LC
K (214)
2.8873
ZAMUJ6-x-LC
K (214)
2.7369
ZALUJ6-x-04-LC
K (214)
3.4888.4
2.8472.4
.7519
3.896 3/8-24 2.0
75
2-11/162-3/4
2-13/162-7/8
2-15/163
ZALUL6-x-LC
L (215)
2.8873
ZAMUL6-x-LC
L (215)
2.8873
ZALUL6-x-04-LC
L (215)
3.4888.4
3.1479.8
.7519
4.13105 3/8-24 2.0
80
2-15/163
3-1/83-3/16
ZALUM6-x-LC
M (216)
3.1680
ZAMUM6-x-LC
M (216)
ZALUM6-x-04-LC
M (216)
3.4888.4
3.2883.5
.7519
4.7120 3/8-24 2.0
ER
Standard
-04(extra length for heat expansion)
X* D*
C*B*
A*ShaftDiameter
RED 0613
D-12 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
ALL-ROUND® FLANGED POLYMER BEARINGSUse with All-Round® inserts or as a sleeve bearing.
STANDARD FLANGED BEARING
PART #*
Group Ring
ER FLANGED BEARING
PART #*
Group Ring
Insert accommodates the following shaft
sizes ASTANDARD
BERB C D
Housing bore for press fit Wt
mm inin
mmin
mmin
mmin
mmin
mmin
lbs
_ _BUAO-A
A (203)
121517
1/29/165/8
11/16
125.4
59/6423.3 .10 1-1/8
28.6 .999 .01
_ _BUBO-B
B (204)
_ _CUBO-B
B (204)
12151720
1/29/165/8
11/163/4
13/16
1-1/828.6
1-3/6426.5
13/1620.7 .10 1-1/4
31.8 1.126 .01
_ _BUCO-C
C (205)
_ _CUCO-C
C (205) 25
3/413/167/8
15/161
1-5/1633.3
1-7/6428.1
15/1623.9 .10 1-1/2
38.1 1.311 .02
_ _BUDO-D
D (206)
_ _CUDO-D
D (206)30
11-1/161-1/81-3/161-1/4
1-9/1639.7
1-19/6432.8
1-1/6425.7 .10 1-3/4
44.5 1.561 .03
_ _BUEO-E
E (207)
_ _CUEO-E
E (207)35
1-3/161-1/41-5/161-3/81-7/16
1-3/444.5
1-31/6437.6
1-5/3229.4 .10 2
50.8 1.749 .04
_ _BUFO-F
F (208)
_ _CUFO-F
F (208) 40
1-7/161-1/21-9/161-5/8
1-15/1649.2
1-39/6440.8
1-11/3234.2 .10 2-1/4
57.2 1.936 .05
_ _BUGO-G
G (209)
_ _CUGO-G
G (209) 45
1-1/21-5/8
1-11/161-3/4
2-1/1652.4
1-43/6442.4
1-21/6433.7 .10 2-1/2
63.5 2.061 .06
_ _BUHO-H
H (210)
_ _CUHO-H
H (210)50
1-11/161-3/4
1-13/161-7/8
1-15/162
2-5/1658.8
1-43/6442.4
1-27/6436.1 .10 2-3/4
69.9 2.311 .08
_ _BUIO-I
I (211)
_ _CUIO-I
I (211)55
1-15/162
2-1/162-1/82-3/162-1/4
2-9/1665.1
1-55/6447.1
1-37/6440.1 .10 2-7/8
73.0 2.561 .09
_ _BUJO-J
J (212)
_ _CUJO-J
J (212)60
2-3/162-1/42-5/162-3/82-7/16
2-3/469.9
2-3/3253.3
1-61/6449.5 .10 3.0
76.2 2.749 .12
_ _BUKO-K
K (214)
_ _CUKO-K
K (214)70
2-7/162-1/22-5/8
2-11/162-3/4
3-1/1677.8
2-7/6453.5
1-61/6449.5 .10 3-1/2
88.9 3.061 .12
_ _BULO-L
L (215)
_ _CULO-L
L (215)75
2-11/162-3/4
2-13/162-7/8
2-15/163
3-3/885.8
2-7/6453.6
2-7/6453.5 .10 4
101.6 3.249 .13
_ _BUMO-M
M (216)
_ _CUMO-M
M (216) 80
2-15/163
3-1/83-3/16
3-1/289.0
2-11/3259.7
2-11/3259.7 .10 4
101.6 3.499 .13
X D
B
A
C
ShaftDiameter
RED 0613
_ _ = Material Identifier (see selection chart on page D-3). QB is available in sizes A through I
EDT Corp 360-574-7294 FAX 360-574-3834 edtcorp.com [email protected] D-13
PLANE BEARING INSTALLATION ARBOR
* Alphabetical shaft size indicates ID will accommodate locking sleeve. These are stocked arbors; other sizes available upon request.
Install Bearing Remove Bearing
Install Bearing Remove Bearing
STANDARD FLANGED BEARING
PART # *
Group Ring
x=Shaft Diameter
Range
A B C Wt
inmm
inmm
inmm lbs
PATUAO-x
A (203)
1/2 11/16
A* 3/419.1
63/6425.0
13/1620.6 .04
PATUBO-x
B (204)
1/2 13/16
B*13/1620.6
1-1/828.6
15/1623.8 .05
PATUCO-x
C (205)
13/16 1
C* 29/3223.0
1-19/6432.9
125.4 .08
PATUDO-x
D (206)
1 1-1/4
D* 1
25.41-35/64
39.3 1-3/16
30.2 .2
PATUEO-x
E (207)
1-3/16 1-7/16
E*1-1/828.6
1-47/6444.1
1-23/6434.5 .2
PATUFO-x
F (208)
1-7/16 1-5/8
F*1-5/1633.3
1-29/3248.4
1-1/238.1 .3
PATUGO-x
G (209)
1-1/2 45mm
G*1-9/3232.5
2-3/6452.0
1-35/6439.3 .4
PATUHO-x
H (210)
1-11/16 2
H* 1-3/834.9
2-19/6458.3
1-35/6439.3 .5
PATUIO-x
I (211)
1-15/16 2-1/4
I*1-35/64
39.32-35/64
64.71-3/444.5 .7
PATUJO-x
J (212)
2-3/16 2-7/16
J* 1-29/32
48.42-47/64
69.4 2
50.8 .9
PATUKO-x
K (214)
2-7/16 70mm
K*1-29/32
48.43-3/6477.4
250.8 1.0
PATULO-x
L (215)
2-11/16 3
L* 2-1/16
52.53-1/482.5
250.8 1.2
PATUMO-x
M (216)
2-3/4 3-3/16
M* 2-21/64
58.94
101.6 2-1/452.5 1.6
RED 0613
D-14 edtcorp.com [email protected] 360-574-7294 FAX 360-574-3834 EDT Corp
Comparison of setscrew locking sleeves and DoubleLock® sleevesIn some sizes, DoubleLock® sleeves have slightly wider collar than standard locking sleeves to accommodate hardware that is strong enough to draw the split flange together to properly secure around the shaft. For details on specific shaft sizes, refer to charts on pages D-10 and D-11.
Example: 1" locking sleeve dimensional change � Body length remains the same at 1.14" � ZALUC6-1 has 1-1/2" collar OD x .375 width, overall length at 1.53"
ZALUC6-1-LC has 1-3/4" collar OD x .50 width, overall length at 1.63"
� DoubleLock® ZALUC6-x-OS-LC sleeve mates with symmetrical Oven Style Poly-Round® (-HTV fixed end)
� DoubleLock® ZALUC6-x-OS-04-LC sleeve mates with symmetrical Oven Style Poly-Round® (-HTE expansion end)
� DoubleLock® ZALUC6-x-04-LC sleeve mates with standard length Poly-Round® (-HTE expansion end)
DoubleLock® is available in all sizes/styles of locking sleeves � DoubleLock® ZALUC6-x-LC sleeve mates with standard Poly-Round®
� DoubleLock® ZAMUC6-x-LC sleeve mates with narrow Poly-Round®
ZALUC6
ZALUC6-LC
ZALUC6-OS-LC
ZALUC6-04-LC
ZALUC6-OS-04-LC
Benefits of using Locking Sleeves with Plane BearingsEDT stainless steel locking sleeves protect shaft surfaces from abrasion and the normal wear caused by plane bearings. Locking sleeves provide: � Improved bearing surface to increase bearing life � Contain lateral shaft movement (replaces standard locking collar) � Protection to shaft � Abrasion resistant � Repair damaged shafting
Locking sleeves must run adjacent to polymer, not stainless steel. On Poly-Round® run on either side of the insert, depending on space available. On All-Round® run against polymer flange.
More About Locking Sleeves
RED 0613
Extra Advantages of DoubleLock® sleeves over setscrew locking sleeves � Holds better under higher thrust loads � Retains its position under temperature cycling
Recommended applications to definitely consider DoubleLock® sleeves � Vertical shaft installation � Ovens � High load angled or vertical screw conveyor � Freezers � Other high thrust load drives