AIR HANDLING REFERENCE CATALOGUE
PRODUCT SUMMARY
www.bradflo.com.au
5FLEX
IBLE D
UC
TING
4FITTIN
GS &
AC
CESSO
RIES
Dam
pers, Equalisers & M
easures3
PLENU
MS
2D
IFFUSER
S1
GR
ILLES & LO
UV
RES
GRILLES & LOUVRESChapter Description Product Code
Double deflection grille AUR
Double deflection grille AUS2
Slimline wall grille ASG
Slimline floor grille ASGF
Return air grille ARG
Egg crate grille (13mm) AEC
Egg crate grille (15mm) AECL
Curved blade register ACB
Acoustic transfer grille ATJ
Aluminium door grille AADR
Weather louvre AWL
Vertical weather louvre AWLV
Double trap weather louvre AWLD
Slimline weather louvre AWLS1.64
1.63
1.62
1.61
1.52
1.51
1.41
1.33
1.32
1.31
1.22
1.21
1.12
1.11
HOMEHOME
Page 1
DOUBLE DEFLECTION GRILLE1.11
AUR
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 8o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
300 X 150450 X 150
600 X 200600 X 300
900 X 3001200 X 300
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the grille, see overleaf.)
Example: If your requirement is for a 12” x 12” (300mm x 300mm) grille with a removable core, the order-ing code would be AURR1212 (When ordering it is not necessary to include the periods [..])
Specials: Curved face grilles (AURC) to suit round rigid ducting and other sizes are available uponrequest. Please contact your nearest branch.
Product Size Numbers"Y" Size
"Type" "X" Size 04(100)
06(150)
08(200)
10(250)
12(300)
14(350)
16(400)
18(450)
20(500)
24(600) Colour
AUR (Fixed core) 10 (250) Powdercoate whiteAURR (Removeable core) 12 (300)
14 (350)
16 (400)
18 (450)20 (500)
Special 24 (600) Special
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description1.11 AUR AUR0606P 3214072 UNIVERSAL REG 188X188 NOMINAL 150X150 WH
AUR0804P 3214071 UNIVERSAL REG 200X100 NOMINAL - WHITEAUR0808P 3214070 UNIVERSAL REGISTER 200X200 COLOUR WHITEAUR1006P 3214093 UNIVERSAL REGISTER 250X150AUR1008P 3214092 UNIVERSAL REGISTER 250X200AUR1010P 3214098 UNIVERSAL REGISTER 250X250AUR1204 3214319 UNIVERSAL REGISTER 300X100
AUR1204P 3214091 UNIVERSAL REGISTER 300X100AUR1206 3214326 UNIVERSAL REGISTER 300X150
AUR1206P 3214094 UNIVERSAL REGISTER 300X150AUR1208P 3214099 UNIVERSAL REGISTER 300X200AUR1210 3214380 UNIVERSAL REGISTER 300X250
AUR1210P 3214075 UNIVERSAL REGISTER 300X250AUR1212P 3214107 UNIVERSAL REGISTER 300X300AUR1404P 3214069 UNIVERSAL REGISTER 350X100AUR1406P 3214097 UNIVERSAL REGISTER 350X150AUR1408P 3214102 UNIVERSAL REGISTER 350X200AUR1604P 3214073 UNIVERSAL REGISTER 400X100AUR1606P 3214010 UNIVERSAL REGISTER 400X150AUR1608P 3214105 UNIVERSAL REGISTER 400X200AUR1610P 3214111 UNIVERSAL REGISTER 400X250AUR1612P 3214117 UNIVERSAL REGISTER 400X300AUR1616P 3214138 UNIVERSAL REGISTER 400X400AUR1806P 3214103 UNIVERSAL REGISTER 450X150AUR1808 3214414 UNIVERSAL REGISTER 450X200
AUR1808P 3214108 UNIVERSAL REGISTER 450X200AUR1810P 3214115 UNIVERSAL REGISTER 450X250AUR1812P 3214082 UNIVERSAL REGISTER 450X300AUR1818 3214517 UNIVERSAL REGISTER 450X450AUR2006 3214400 UNIVERSAL REGISTER 500X150
AUR2006P 3214106 UNIVERSAL REGISTER 500X150AUR2008P 3214442 UNIVERSAL REGISTER 500X200AUR2010P 3214129 UNIVERSAL REGISTER 500X250AUR2012P 3214135 UNIVERSAL REGISTER 500X300AUR2020 3214618 UNIVERSAL REGISTER 500X500
AUR2208P 3214116 UNIVERSAL REGISTER 550X200 COLOUR WHITEAUR2406 3214482 UNIVERSAL REGISTER 600X150
AUR2406P 3214125 UNIVERSAL REGISTER 600X150AUR2408P 3214130 UNIVERSAL REGISTER 600X200AUR2410P 3214141 UNIVERSAL REGISTER 600X250AUR2412P 3214145 UNIVERSAL REGISTER 600X300AUR2416P 3214153 UNIVERSAL REGISTER 600X400AUR2424 3214855 UNIVERSAL REGISTER 600X600
AUR2608P 3214132 UNIVERSAL REGISTER 650X200AUR3006 3214506 UNIVERSAL REGISTER 750X150AUR3008 3214590 UNIVERSAL REGISTER 750X200AUR3010 3214633 UNIVERSAL REGISTER 750X250
AUR4006P 3214134 UNIVERSAL REGISTER 1000 X 150
1.11 AURR AURR1204 3214435 UNIVERSAL REG REMOVABL 300X100AURR1206 3214461 UNIVERSAL REG REMOVABL 300X150AURR1406 3214481 UNIVERSAL REG REMOVABL 350X150AURR1606 3214494 UNIVERSAL REG REMOVABL 400X150AURR1608 3214512 UNIVERSAL REG REMOVABL 400X200AURR1610 3214562 UNIVERSAL REG REMOVABL 400X250AURR2012 3214661 UNIVERSAL REG REMOVABL 500X300AURR2408 3214651 UNIVERSAL REG REMOVABL 600X200AURR2412 3214731 UNIVERSAL REG REMOVABL 600X300
Metalflex Coded Products
DOUBLE DEFLECTION GRILLE1.11
AUR
Bradflo reserves the right to make changes to product without prior noticePage 2
Design dimensions
Description
The 1.11 (AUR) grilles are designed for use in sup-ply and return air applications.
Double deflection grilles have horizontal front bladesand vertical rear blades.
The AURR type grille has a removable core forcleaning or installation.
All grilles feature attractively designed extruded alu-minium features. The blades are aerodynamicallydesigned to provide optimum air flow and low soundpressure level performance.
Standard finishes are natural anodised or powder-coat white. There are 15 other colours available atno additional cost. Please contact your nearestBradflo branch for the selection range.
Other non-standard colours are available uponrequest.
DOUBLE DEFLECTION GRILLE1.11
AUR
Bradflo reserves the right to make changes to product without prior notice Page. 3
Side elevationPlan viewWall Wall
Ceiling
bh bv
Lbh Lbv
00 blowingbh = L0.3 x 0.3Lbh = L0.3 x 0,5
450 blowingbh = L0.3 x 1.5Lbh = L0.3 x 0,5
00 blowingbv = L0.3 x 0.09Lbv = L0.3 x 0,5
00 blowingbv = L0.3 x 0.06Lbv = L0.3 x 0,4
0 100 200 300 400 500 600 700
Nominal Size
0.72
0.74
0.76
0.78
0.8
0.82Correction Factor
Free area correction factor f1
Free Area FactorTo calculate the free area, the grille’snominal area is multiplied by f1, wheref1 is a correction factor and is deter-mined by the graph. For single deflec-tion the nominal size is the grille’s “Y”dimension. For double deflection it isthe grille’s “X” dimension.
Free Area of AUR Grille (m2)Y/X 300 400 450 500 600 750 900 1200150 0.029 0.038 0.043 0.048 0.058 0.072 0.087 0.116200 0.038 0.051 0.058 0.064 0.077 0.097 0.116 0.156250 0.048 0.065 0.073 0.081 0.097 0.122 0.146 0.195300 0.058 0.078 0.088 0.097 0.117 0.147 0.176 0.235400 0.078 0.104 0.117 0.130 0.157 0.196 0.236 0.314
Free area for standard size double deflection grilles.
Example:
Size 300 x 150 single deflection.From the graph, f1 = 0.79 for thegrille height of 150. The grille’s freearea is therefore: 300/1000 x150/1000 x 0.79 = 0.0355m2.For a double deflection include thefactor f1 for the grille length. Thefree area would therefore be:300/1000 x 150/1000 x 0.79 x 0.80= 0.0284m2.
DOUBLE DEFLECTION GRILLE1.11
AUR
Bradflo reserves the right to make changes to product without prior noticePage 4
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Throw is given for equal slotsin each direction.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
50 500 5000
Flow Rate (l/s)
1
10
Static Pressure (Pa)
100 200 1000 2000
500.03 0.04 0.06 0.1 0.15 0.24 0.33
0.05 0.08 0.12 0.18
40
20
25
30
35
25 - 50
20 - 40
15 - 30
12 - 24
10 - 20
8 - 16
6 - 12
5 - 10
4 - 8
20
5
2
Performance data (00 deflection)
Performance data (220 deflection)
50 500 5000
Flow Rate (l/s)
1
10
Static Pressure (Pa)
100 200 1000 2000
500.03 0.04 0.06 0.1 0.15 0.24 0.33
0.05 0.08 0.12 0.18
40
20
25
35
15 - 30
12 - 24
10 - 20
8 - 16
6 - 12
5 - 10
4 - 8
3 - 6
2 - 4
20
5
2
DOUBLE DEFLECTION GRILLE1.11
AUR
Bradflo reserves the right to make changes to product without prior notice Page. 5
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Throw is given for equal slotsin each direction.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
50 500 5000
Flow Rate (l/s)
1
10
Static Pressure (Pa)
100 200 1000 2000
500.03 0.04 0.06 0.10 0.15 0.24 0.33
0.05 0.08 0.12 0.18
35
20
30
10 - 20
8 - 16
6 - 12
5 - 10
4 - 8
3 - 6
2-4
20
5
2
Performance data (450 deflection)
DOUBLE DEFLECTION GRILLE1.12
AUS2
Page. 6
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 8o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
300 X 150450 X 150
600 X 200600 X 300
900 X 3001200 X 300
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
10(250)
12(300)
14(350)
16(400)
18(450)
20(500) Colour
AUS2 (Fixed core) 12 (300) white
14 (350)
16 (400)
18 (450)
20 (500)
22 (550)
Special 24 (600) Special
26 (650)
28 (700)
30 (750)
32 (800)
34 (850)
36 (900)
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the grille, see overleaf.)
Example: If your requirement is for a 12” x 6” (300mm x 150mm) grille, the ordering code would beAUS21206 (When ordering it is not necessary to include the periods [..])
Specials: Special sizes are available up to a maximum of 500mm in the “Y” dim and 2400mm in the “X”dim. Please contact you nearest Bradflo office.
DOUBLE DEFLECTION GRILLE1.12
AUS2
Page. 7 Bradflo reserves the right to make changes to product without prior notice
Description
The 1.12 (AUS2) grilles are designed for use in sup-ply and return air applications.
Double deflection grilles have horizontal front bladeswith vertical rear blades.
All grilles feature attractively designed extruded alu-minium features. The blades are designed to pro-vide optimum air flow and low sound pressure levelperformance.
Standard finishes are natural anodised or powder-coat white. There are 15 other standard coloursavailable at no extra cost. Please contact your near-est Bradflo branch for colour selection.
Other non standard sizes and finishes are availableas special upon request.
Design dimensions
DOUBLE DEFLECTION GRILLE1.12
AUS2
Page. 8Bradflo reserves the right to make changes to product without prior notice
50 500 5000
Flow Rate (l/s)
1
10
Static Pressure (Pa)
100 200 1000 2000
501 2 3 4 5 6 7 8 9
50
35
45
4540
3530
25
20
20
5
2
3025
20
10
15
10
5
10
15
Performance data (AUS2)
These graphs are for selection only and should not be used for commissioning.
Example:
An airflow of 500 l/s using size No.6 will give a pres-sure drop of 6Pa, an NR rating of 18 and a throw of11 metre with a terminal velocity of 0.25 m/s.
Performance Nomogram
Notes: (i) Throw data is in metre at a terminal veloc-ity of 0.25 m/s.(ii) Deflection is 00
(iii) Throws are based on isothermal air supply.
X/Y 100 150 200 250 300 350 400 450 500 550 600200 1.00250 1.25 2.00300 1.50 2.25 3.00350 1.75 2.50 3.50 4.00400 2.00 3.00 4.00 4.25450 2.25 3.25 4.00 4.50500 2.50 3.75 4.25 5.00 5.50550 2.75 4.00 4.50 5.25 5.75600 3.00 4.00 4.75 5.50 6.00 6.25650 3.25 4.25 5.00 5.50 6.00 6.25 6.50700 3.50 4.50 5.25 5.75 6.25 6.50 6.75 7.00 7.25750 3.75 4.50 5.25 6.00 6.25 6.50 6.75 7.25 7.25 8.00800 4.00 4.75 5.50 6.00 6.25 6.75 7.00 7.50 8.00 8.25850 4.00 5.00 5.75 6.25 6.50 6.75 7.25 7.75 8.25 8.50 9.00900 4.00 5.00 6.00 6.25 6.50 7.00 7.50 8.00 8.50 9.00 9.00950 4.25 5.25 6.00 6.25 6.75 7.25 7.75 8.25 8.75 9.00 9.251000 4.25 5.25 6.00 6.50 6.75 7.25 8.00 8.50 9.00 9.25 9.501050 4.50 5.50 6.00 6.50 7.00 7.50 8.25 8.75 9.00 9.25 9.501100 4.50 5.50 6.25 6.50 7.00 7.75 8.25 9.00 9.25 9.50 9.751150 4.75 5.75 6.25 6.75 7.25 8.00 8.50 9.00 9.25 9.50 9.751200 4.75 6.00 6.25 6.75 7.50 8.25 8.75 9.00 9.50 9.75 10.00
Wid
th (m
m)
ASPECT TABLE FOR SIZE NUMBERS
Height (mm)
Engineering Graphs
Throws shown are to a terminal velocity of 0.25m/s.
SLIMLINE WALL GRILLE1.21
ASG
Page. 9
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 4o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
75100
150200
250
400
Vertical X 1 m
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the grille, see overleaf.)
Example: If your requirement is for a 12” x 8” (300mm x 200mm) standard 150 deflection grille, the order-ing code would be AAF1208. (When ordering it is not necessary to include the periods [..])
Product Size Numbers"Y" Size
"Type" "X" Size 04(100)
06(150)
08(200)
10(250)
12(300)
14(350)
16(400)
18(450)
20(500)
24(600) Colour
ASF(Zero deflection) 10 (250) Powdercoate whiteAAF(15o deflection) 12 (300) Natural anodisedAST (0o (extra slim blade) 14 (350)
AAT (15o extra slim blade) 16 (400)
18 (450)20 (500)
Special 24 (600) Special
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description1.21ASF ASFR1204 3211730 STEEL FLOOR REG 300X100 POTTERY
ASFR1204BL 3211318 STEEL FLOOR REG 300X100 BLACKASFR1204BS 3211319 STEEL FLOOR REG 300X100 BRIGHT SILVERASFR1204CH 3211320 STEEL FLOOR REG 300X100 CHARCOALASFR1204GR 3211321 STEEL FLOOR REG 300X100 GREYASFR1204HB 3211322 STEEL FLOOR REG 300X100 CHAM-BROWNASFR1204WH 3211323 STEEL FLOOR REG 300X100 WHITE
ASFR1406 3211731 STEEL FLOOR REG 350X150 POTTERYASFR1406BL 3211329 STEEL FLOOR REG 350X150 BLACKASFR1406CH 3211330 STEEL FLOOR REG 350 * 150 * CHARCOAL
1.21 AAF AAF1204NA 3209764 BAR GRILLE-15 DEG *295 X 95 EXACT NECK*AAF1406NA 3209901 BAR GRILLE-15 DEG *345 X 145 EXACT NECK*AAF3204P 3209611 BAR GRILLE-15DEG DEF *800/100 WHITE F/C
1.21 AST AST1606P 3211298 AST REM COR BAR GRILLE 400X150 NOMINALAST1608P 3211299 AST REM COR BAR GRILLE 400 X 200 NOMINALAST1810 3211365 SLIMLINE ST BAR GRILLE 450X250AST1812 3211470 SLIMLINE ST BAR GRILLE 450X300
AST2006P 3211300 AST REM COR BAR GRILLE 500 X 150 NOMINALAST2406P 3211302 AST BAR GRILLE - REMOVE CORE 600 X 150ASTMTBF 3215077 SLIMLINE GRILLE 1195X595 FACE SZ WH FIX
1.21 AAT AAT2404P 3214077 SLM GRL 15'DEF*NMNL*600*100*WHTE*REMOVABAAT3204P 3214079 SLM GRL 15'DEF*NMNL*800*100*WHTE*REMOV
Metalflex Coded Products
SLIMLINE WALL GRILLE1.21
ASG
Page. 10 Bradflo reserves the right to make changes to product without prior notice
DescriptionModel 1.21 (ASG) grilles have been designed foruse in supply, return or exhaust air applications.They are recommended for side wall, or sill mount-ing.All grille core assemblies are mounted in a sturdyframe and can be either fixed core for security pur-poses or removable core for easy access.For Y sizes over 500mm and X sizes over 1200mmthe core is fixed.
The grilles are manufactured from high quality alu-minium extrusion with a choice of four blade styleswith 0o or 15o air stream.
Standard finishes are natural anodised and whiteelectrostatic powdercoat. There are also 15 othercolours available at no additional cost.Contact your local Bradflo branch for any specialrequirement you may have.
Blade profiles available
SLIMLINE WALL GRILLE1.21
ASG
Page. 11Bradflo reserves the right to make changes to product without prior notice
Side elevationPlan viewWall Wall
Ceiling
bh bv
Lbh Lbv
00 blowingbh = L0.3 x 0.3 + XLbh = L0.3 x 0,6
00 blowingbv = L0.3 x 0.09 + YLbv = L0.3 x 0,5
Grille length (m) 0.5 1 1.5 2 3+Add to NR value -3 0 +2 +3 +5Multiply throw by 0.8 1 1.2 1.35 1.5
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
All +6 +5 +3 -2 -8 -13 -15Tol +/- 2 2 2 2 2 2 2
Correction table for grilles of length other than 1metre
X = Nominal width Y = Nominal height
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calcu-lated by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
0 100 200 300 400 500 600 700
Nominal Size
0.72
0.74
0.76
0.78
0.8
0.82Correction Factor
Correction factor kok
Free Area Factor
To evaluate the free area, thegrilles’ nominal area is multipliedby f1 where f1 is a correction fac-tor and is determined by thegraph.
SLIMLINE WALL GRILLE1.21
ASG
Page. 12 Bradflo reserves the right to make changes to product without prior notice
50 500 5000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
100 200 1000 2000
15075 100 125 150 200 250 300 400
359 - 18
8 - 167 - 14
6 - 12
5 - 104 - 8
50
5
3025
20
3 - 6
ASF grille x 1000 mm long (“X” dim)
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Throw is given for equal slotsin each direction.
For return or exhaust air, the pressure drop andnoise level may be calculated as follows.
Pressure drop Noise levelPdra = Pd x 1.2 NRra = NR + 8
SLIMLINE FLOOR GRILLE1.22
ASGF
Page. 13
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 4o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
75100
150200
250
400
Vertical X 1 m
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the grille, see overleaf.)
Example: If your requirement is for a 12” x 8” (300mm x 200mm) standard 150 deflection grille, the order-ing code would be AAFF1208. (When ordering it is not necessary to include the periods [..])
Product Size Numbers"Y" Size
"Type" "X" Size 04(100)
06(150)
08(200)
10(250)
12(300)
14(350)
16(400)
18(450)
20(500)
24(600) Colour
ASFF(0o deflection ) 10 (250)AAFF(15o deflection ) 12 (300) PowdercoatASTF (0o slim blade ) 14 (350) WhiteAATF (15o slim blade ) 16 (400)
ASIF (0o deflection ) 18 (450)AAIF (15o deflection ) 20 (500)ASIF (0o slim blade ) 24 (600) SpecialAAIF (15o slim blade )
Special
SLIMLINE FLOOR GRILLE1.22
ASGF
Page. 14 Bradflo reserves the right to make changes to product without prior notice
DescriptionModel 1.22 (ASGF) grilles have been designed foruse in supply, return or exhaust air applications.They are recommended for floor mounting. (for wallmounting refer section 1.21 (ASG).
All grille core assemblies are mounted in a sturdyframe and can be either fixed core for security pur-poses or removable core for easy access.For Y sizes over 500mm and X sizes over 1200mmthe core is fixed.
The grilles are manufactured from high quality alu-minium extrusion with a choice of four blade styleswith 0o or 15o air stream.
Standard finishes are natural anodised and whiteelectrostatic powdercoat. There are also 15 othercolours available at no additional cost.Contact your local Bradflo branch for any specialrequirement you may have.
Blade profiles available
Flanged frame “I” frame
Important!The ASGF floor grille (1.22) has been designed towithstand an evenly distributed load of 70 kg with abuilt in safety factor of two (2).If the load on the grille is likely to exceed 70 kgthen that load should be specified at the time ofordering for specific design and pricing.
SLIMLINE FLOOR GRILLE1.22
ASGF
Page. 15Bradflo reserves the right to make changes to product without prior notice
Side elevationFront elevationFloor Floor
Wall
b h b v
L bh
L bv
00 blowingbh = L0.3 x 0.3 + XLbh = L0.3 x 0,6
00 blowingbv = L0.3 x 0.09 + YLbv = L0.3 x 0,5
Grille length (m) 0.5 1 1.5 2 3+Add to NR value -3 0 +2 +3 +5Multiply throw by 0.8 1 1.2 1.35 1.5
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
All +6 +5 +3 -2 -8 -13 -15Tol +/- 2 2 2 2 2 2 2
Correction table for grilles of length other than 1metre
X = Nominal width Y = Nominal height
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calcu-lated by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
0 100 200 300 400 500 600 700
Nominal Size
0.72
0.74
0.76
0.78
0.8
0.82Correction Factor
Correction factor kok
Free Area Factor
To evaluate the free area, thegrilles’ nominal area is multipliedby f1 where f1 is a correction fac-tor and is determined by thegraph.
SLIMLINE FLOOR GRILLE1.22
ASGF
Page. 16 Bradflo reserves the right to make changes to product without prior notice
50 500 5000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
100 200 1000 2000
15075 100 125 150 200 250 300 400
359 - 18
8 - 167 - 14
6 - 12
5 - 104 - 8
50
5
3025
20
3 - 6
ASGF grille x 1000 mm long (“X” dim)
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Throw is given for equal slotsin each direction.
For return or exhaust air, the pressure drop andnoise level may be calculated as follows.
Pressure drop Noise levelPdra = Pd x 1.2 NRra = NR + 8
RETURN AIR GRILLE1.31
ARG
Page. 17
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 10o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
250 X 150250 X 250
400 X 300600 X 450
600 X 600
1000 X 1000
Product Size Numbers"Y" Size
"Type" "X" Size 14(350)
16(400)
18(450)
20(500)
24(600)
30(750)
36(900) Colour
ARG 14 (350) Powdercoate whiteARGF (with filter) 16 (400)
18 (450)
20 (500)
24 (600)
Special sizes Special colours
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the grille, see overleaf.)
Example: If your requirement is for a 18” x 24” (450 x 600) return air grille, the ordering code would beARG1824. {When ordering it is not necessary to include the periods [..])Special sizes are available uponrequest. Please contact your nearest Bradflo office.
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description1.31 ARG ARG0606P 3214066 LVRE GRL REM CRE*150X150*NMNL * CWHITE
ARG0808 3214438 LOUVRE GRILLE REMOVE 200X200ARG0808P 3214114 LVRE GRL REM CRE*200X200*NMNL * CWHITEARG1006 3214407 LOUVRE GRILLE REMOVE 250X150ARG1010 3214464 LOUVRE GRILLE REMOVE 250X250ARG1206 3214415 LOUVRE GRILLE REMOVE 300X150
ARG1212P 3214127 LVRE GRL REM CRE*300X300*NMNL * CWHITEARG1218 3214579 LOUVRE GRILLE REMOVE 300X450
ARG1616P 3214133 LVRE GRL REM CRE*400X400*NMNL * CWHITEARG1624 3214595 LOUVRE GRILLE REMOVE 400X600ARG1636 3214825 LOUVRE GRILLE REMOVE 400X900ARG1812 3214471 LOUVRE GRILLE REMOVE 450X300
ARG1818P 3214124 LVRE GRL REM CRE*450X450*NMNL * CWHITEARG2012 3214475 LOUVRE GRILLE REMOVE 500X300
ARG2412P 3211301 LVR GRL REMOVE CORE 600X300 NOMINAL WHARG2424P 3211303 LVE GRL REMOVE CORE 600X600 NOMINAL WHARGMTBHP 3211304 LVR GRL REMOVE CORE 595X595 FACE SZ WH
1.31 ARGF ARGF1616 3214608 LOUVRE GRILLE + FILTER 400X400ARGF1620 3214681 LOUVRE GRILLE + FILTER 400X500ARGF1624 3214717 LOUVRE GRILLE + FILTER 400X600ARGF1630 3214804 LOUVRE GRILLE + FILTER 400X750ARGF1636 3214880 LVRE GRL + FLTR 400X900*NOMINAL * WHITEARGF1640 3215096 LOUVRE GRILLE +FILTER 400X1000ARGF1648 3215109 LOUVRE GRILLE +FILTER 400X1200ARGF1836 3215088 LOUVRE GRILLE + FILTER 450X900ARGF2424 3214774 LOUVRE GRILLE + FILTER 600X600
ARGF3012P 3211297 LVR GRL H/CORE W/ FILTER 750X300 NOM WH
Metalflex Coded Products
RETURN AIR GRILLE1.31
ARG
Page. 18 Bradflo reserves the right to make changes to product without prior notice
DescriptionThe 1.31 (ARG) grilles are designed for use inexhaust or return air situations, and may be mount-ed in a wall or ceiling.This grille is an attractive, robust unit manufacturedfrom aluminium extrusion and powder coated to pro-vide a long lasting finish.The core is removable as standard for “Y” sizes upto and including 1000mm.
Standard finish is white electrostatic powdercoat.There are also 15 other colours to choose from atno additional cost.
Contact your local Bradflo branch for any specialrequirement you may have.
Air FiltrationA filter is offered as a standard option in removablecore grilles. This filter is easily removed for clean-ing, easy access or replacement.
General DescriptionThe filter media is manufactured in a synthetic non-woven material. It offers low air resistance, long lifeand satisfactory dust extraction efficiency with par-ticular emphasis on the collection of fluff, linters andpollens.
Physical Properties of filter material
Temperature resistance: 120o C constant.Fire resistance: Manufactured in fire retardentresin system.
PerformanceWhen tested to AS1132-1973 methods 2 and 4 thefollowing results were obtained.Initial resistance at 1.8 m/s was 27 PaWhen loaded to a final resistance of 125 Pa theaverage resistance was found to be 53.7% and thedust holding capacity 290 g/m2.Note! AS1132 method 4 uses test dust #4.
Design dimensions
RETURN AIR GRILLE1.31
ARG
Page. 19Bradflo reserves the right to make changes to product without prior notice
Free Area FactorTo calculate the free area, the grilles’ nominal area ismultiplied by f1, where f1 is a correction factor and isdetermined from the graph.
0 100 200 300 400 500 600 700
Nominal Size
0.72
0.74
0.76
0.78
0.8
0.82Correction Factor
Free area correction factor
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
All +5 +7 +4 -3 -8 -12 -15Tol +/- 2 2 2 2 2 2 2
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Correction factor Kok
Free Area of ARG Grille (m2)Y/X 250 300 400 600 750 900 1000 1200150 0.026 0.031 0.041 0.046 0.062 0.092 0.013 0.123250 0.047 0.056 0.075 0.084 0.113 0.169 0.188 0.225300 0.057 0.069 0.092 0.103 0.138 0.207 0.230 0.276450 0.089 0.107 0.143 0.160 0.214 0.321 0.356 0.428600 0.121 0.145 0.193 0.217 0.289 0.434 0.482 0.579900 0.184 0.220 0.294 0.331 0.044 0.661 0.735 0.8821000 0.205 0.246 0.327 0.368 0.491 0.737 0.819 0.9821200 0.247 0.296 0.395 0.444 0.592 0.888 0.987 1.184
The graphs are for selection only and should not be used for commissioning.
RETURN AIR GRILLE1.31
ARG
Page. 20
50 500 5000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
100 200 1000 2000
1500.04 0.06 0.09 0.14 0.18 0.27 0.36 0.56 0.80
3550
5
3025
20
1.00
1.44
Performance data
The graphs are for selection only and should not be used for commissioning.
EGG CRATE GRILLE 13mm1.32
AEC
Page. 21
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
150 X 150200 X 200
300 X 300450 X 450
600 X 600
900 X 900
Product Size Numbers"Y" Size
"Type" "X" Size 6"(150)
8"(200)
10"(250)
12"(300)
14"(350)
16"(400)
18"(450)
20"(500)
24"(600)
28"(700)
36"(900)
40"(1000) Colour
AEC (Fixed core) 6" (150) PowderAECS (Ceiling Clip) 8" (200) coatAECRC (Removeable core) 10" (250) whiteAEHF (Hinged with filter) 12" (300)AEH (Hinged with no filter) 14" (350)AECRI (Removeable inner) 16" (400)AECR (Removeable grille) 18" (450)
20" (500) SpecialSpecial sizes 24" (600) colours
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the grille, see overleaf.)
Example: If your requirement is for a 18” x 24” (450 x 600) egg crate grille, hinged with a filter, the orderingcode would be AEHF1824. {When ordering it is not necessary to include the periods [..])Special sizes areavailable upon request. Contact your nearest Bradflo office.
EGG CRATE GRILLE 13mm1.32
AEC
Page. 22 Bradflo reserves the right to make changes to product without prior notice
DescriptionThe 1.32 (AEC) grilles are designed for use inexhaust or return air situations and may be mountedin walls or ceilings. They are not to be used for floormounting.
The grilles have extruded aluminium frames with a13mm x 13mm x 13mm aluminium egg crate core.Hinged models are available as standard and pro-vide easy access to filters or other equipment. Grilles up to 600mm x 600mm are available withspring retaining clip for fast and efficient mounting inceilings.
The free area of the grille is >90% of the nominalarea, providing maximum air flow and very lownoise levels.
FinishStandard finish is white electrostatic powdercoat.There are also 15 other colours to choose from atno additional cost.
Contact your local Bradflo branch for any specialrequirement you may have.
Design dimensions
EGG CRATE GRILLE 13mm1.32
AEC
Page. 23Bradflo reserves the right to make changes to product without prior notice
Air FiltrationA filter is offered as a standard option in removableand hinged core grilles. This filter is easily removedfor cleaning, easy access or replacement.
General DescriptionThe filter media is manufactured in a synthetic non-woven material. It offers low air resistance, long lifeand satisfactory dust extraction efficiency with par-ticular emphasis on the collection of fluff, linters andpollens.
Physical Properties of filter material
PerformanceWhen tested to AS1132-1973 methods 2 and 4(Report No. 1558/95), the following results wereobtained.Initial resistance at 1.8 m/s was 35 PaWhen loaded to a final resistance of 250 Pa theaverage resistance was found to be 85.3% and thedust holding capacity 411 g/m2.Note! AS1132 method 4 uses test dust #4.
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
All +14 +14 +6 -8 -5 -4 -8Tol +/- 2 2 2 2 2 2 2
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Correction factor Kok
50 500 5000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
100 200 1000 2000
150150 200 250 300 350 450 500 600
3550
5
30
25
20
750
900
1200
Square size (mm)
Performance data
These graphs are for selection only and should not be used for commissioning.
EGG CRATE GRILLE 15mm1.33
AECL
Page. 24
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
150 X 150200 X 200
300 X 300450 X 450
600 X 600
900 X 900
Product Size Numbers"Y" Size
"Type" "X" Size 6"(150)
8"(200)
10"(250)
12"(300)
14"(350)
16"(400)
18"(450)
20"(500)
24"(600)
28"(700)
36"(900)
40"(1000) Colour
AECL (Fixed core) 6" (150) PowderAECLS (Ceiling Clip) 8" (200) coatAECLRC (Removeable core) 10" (250) whiteAELHF (Hinged with filter) 12" (300)AELH (Hinged with no filter) 14" (350)AECLRI (Removeable inner) 16" (400)AECLR (Removeable grille) 18" (450)
20" (500) SpecialSpecial sizes 24" (600) colours
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the grille, see overleaf.)
Example: If your requirement is for a 18” x 24” (450 x 600) egg crate grille, hinged with a filter, the orderingcode would be AELHF1824. {When ordering it is not necessary to include the periods [..])Special sizes areavailable upon request. Contact your nearest Bradflo office.
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description1.33 AELHF AELHF1224 1607170 PROFILER EGGCRATE BLK FILTER 600 X 300
AELHF1616P 1602724 EGGCRATE GRILLE W/FILTER 400X400MMAELHF1620 1607168 PROFILER EGGCRATE BLK FILTER 500 X 400AELHF1624 1604455 PROFILER EGGCRATE BLK FILTER 600 X 400
AELHF1630P 1312927 PROFILER EGGCRATE BLK FILTER 750 X 400AELHF1636 1312928 PROFILER EGGCRATE BLK FILTER 900 X 400AELHF1640 1312929 PROFILER EGGCRATE BLK FILTER 1000 X 400AELHF1648 1312930 PROFILER EGGCRATE BLK FILTER 1200 X 400
AELHF2036P 1312645 PROFILER EGGCRATE BLK FILTER 900 X 500AELHF2230P 1604458 PROFILER EGGCRATE BLK FILTER 750 X 550AELHFMTBF 1312931 PROFILER EGGCRATE BLK FILTER 1195 X 595AELHFMTBH 1312932 PROFILER EGGCRATE BLK FILTER 595 X 595
1.33 AECLRI AECLRI0606P 3214085 EC REM INNER 150X150 NOMINAL * WHITEAECLRI0808P 3214088 EC REM INNER 200X200 NOMINAL * WHITEAECLRI1010P 3214089 EC REMOV INNER 250X250 NOMINAL * WHITEAECLRI1212P 3214090 EC REMOV INNER 300X300 NOMINAL * WHITEAECLRI1616P 3214007 EC REMOV INNER 400X400 NOMINAL * WHITEAECLRI1818P 3214104 EC REMOV INNER 450X450 NOMINAL * WHITE
AECLRIMTB1/4P 3214113 EC REMOVABLE INNER 295X595F FACE * WHITE
Metalflex Coded Products
EGG CRATE GRILLE 15mm1.33
AECL
Page. 25 Bradflo reserves the right to make changes to product without prior notice
DescriptionThe 1.33 (AECL) grilles are designed for use inexhaust or return air situations and may be mountedin walls or ceilings. They are not to be used for floormounting.
The grilles have extruded aluminium frames with a15mm x 15mm x 13mm aluminium egg crate core.Hinged models are available as standard and pro-vide easy access to filters or other equipment. Grilles up to 600mm x 600mm are available withspring retaining clip for fast and efficient mounting inceilings.
The free area of the grille is >90% of the nominalarea, providing maximum air flow and very lownoise levels.
FinishStandard finish is white electrostatic powdercoat.There are also 15 other colours to choose from atno additional cost.
Contact your local Bradflo branch for any specialrequirement you may have.
Design dimensions
EGG CRATE GRILLE 15mm1.33
AECL
Page. 26Bradflo reserves the right to make changes to product without prior notice
Air FiltrationA filter is offered as a standard option in removableand hinged core grilles. This filter is easily removedfor cleaning, easy access or replacement.
General DescriptionThe filter media is manufactured in a synthetic non-woven material. It offers low air resistance, long lifeand satisfactory dust extraction efficiency with par-ticular emphasis on the collection of fluff, linters andpollens.
Physical Properties of filter material
PerformanceWhen tested to AS1132-1973 methods 2 and 4 thefollowing results were obtained.Initial resistance at 1.8 m/s was 35 PaWhen loaded to a final resistance of 250 Pa theaverage resistance was found to be 85.3% and thedust holding capacity 411 g/m2.Note! AS1132 method 4 uses test dust #4.
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
All +14 +14 +6 -8 -5 -4 -8Tol +/- 2 2 2 2 2 2 2
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Correction factor Kok
50 500 5000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
100 200 1000 2000
150150 200 250 300 350 450 500 600
3550
5
30
25
20
750
900
1200
Square size (mm)
Performance data
These graphs are for selection only and should not be used for commissioning.
CURVED BLADE REGISTER1.41
ACB
Page. 27Note! Shaded areas indicate standard product.
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 8o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
200 X 200250 X 250
300 X 300400 X 400
500 X 500600 X 600
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
10(250)
12(300)
14(350)
16(400)
18(450)
20(500)
24(600) Colour
ACB2B (2 way blow) 06 (150) Powdercoate whiteACBMB (Multi blow) 08 (200) Special colours
10 (250)
12 (300)
14 (350)
16 (400)
18 (450)
20 (500)
Special 24 (600)
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the grille, see overleaf.)
Example: If your requirement is for a 12” x 12” (300mm x 300mm) curved blade (2 way blow) grille, theordering code would be ACB2B1212. {When ordering it is not necessary to include the periods [..])
Specials:Special sizes are available upon request. Please contact your nearest Bradflo office.
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description1.41 ACB2B ACB2W1515P 3214112 BEVEL DIFF 2 WAY 375X375
ACB2W1818P 3214121 BEVEL DIFF 2 WAY 450X450ACB3W0909P 3214118 BEVEL DIFF 3 WAY 225X225 ALUMACB3W1212P 3214128 BEVEL DIFF 3 WAY 300X300 ALUMACB3W1515P 3214580 BEVEL DIFF 3 WAY 375X375 ALUMACB4W0606 3214369 BEVEL DIFF 4 WAY 150X150 ALUM
ACB4W0606P 3214067 BEVEL DIFF 4 WAY 150X150ACB4W0909P 3214109 BEVEL DIFF 4 WAY 225X225 ALUMACB4W1212P 3214123 BRADFLO ALUM BEVEL DIFF. 4 WAY 300x300mmACB4W1515P 3214131 BEVEL DIFF 4 WAY 375X375 ALUMACB4W1818P 3214142 BEVEL DIFF 4 WAY 450X450 ALUM
Metalflex Coded Products
CURVED BLADE REGISTER1.41
ACB
Page. 28 Bradflo reserves the right to make changes to product without prior notice
Description
Model 1.41 (ACB) grilles have been designed forsupply air situations and are especially suited forevaporative cooling systems.These grilles are available in 1, 2, 3 or 4 way airflow patterns. The ACB2B may be configured to a 1or 2 way blow and the ACBMB may be configuredto all directions above. Note that when using a neckreducer (ANAG) the configuration of the ACBMBmust be carried out prior to fitting the neck reducer.The blade profiles have been designed to providethe most efficient operation at the lowest possiblesound level.
The main components of the grille are manufacturedfrom extruded aluminium.
FinishStandard finish is white electrostatic powdercoat.There are also 15 other colours available at no addi-tional cost.Contact your local Bradflo branch for any specialrequirement you may have.
CURVED BLADE REGISTER1.41
ACB
Page. 29Bradflo reserves the right to make changes to product without prior notice
10 100 1000
Flow Rate (l/s)
1
10
Static Pressure (Pa)
2000
50 200 250 300 350 400 450 500 600
35
10 - 20
8 - 16
7 - 14
20
5
2
30
25
20
4 - 8
5 - 10
6 - 12
50 500
3 - 6
2 - 4
20 200
10 100 1000
Flow Rate (l/s)
1
10
Static Pressure (Pa)
2000
50 200 250 300 350 400 450 500 600
35
7 - 14
6 - 12
5 - 10
20
5
2
30
25
20
2 - 4
3 - 6
4 - 8
50 50020020
Performance data (1-way blow)
Performance data (2-way blow)
These graphs are for selection only and should not be used for commissioning
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Throw is given for equal slotsin each direction.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
CURVED BLADE REGISTER1.41
ACB
Page. 30 Bradflo reserves the right to make changes to product without prior notice
10 100 1000
Flow Rate (l/s)
1
10
Static Pressure (Pa)
2000
50 200 250 300 350 400 450 500 600
356 - 12
5 - 10
20
5
2
30
25
20
2 - 4
3 - 6
4 - 8
50 50020020
10 100 1000
Flow Rate (l/s)
1
10
Static Pressure (Pa)
2000
50 200 250 300 350 400 450 500 600
35
5 - 10
20
5
2
30
25
20
2 - 4
3 - 6
4 - 8
50 50020020
Performance data (3-way blow)
Performance data (4-way blow)
These graphs are for selection only and should not be used for commissioning
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Throw is given for equal slotsin each direction.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
Page. 31Bradflo reserves the right to make changes to product without prior notice
CURVED BLADE REGISTER1.41
ACB
Air pattern configuration
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
All +16 +14 +12 +6 -1 -6 -8Tol +/- 2 2 2 2 2 2 2
Sound data
NR levels for the grille may be determined fromthe engineering graph.
Sound power level Lw
The generated sound power level Lw dB is cal-culated by adding the correction factor Kok (seetable below) to the sound level NR dB accordingto the formula:
Lw = NR + Kok
Correction factor Kok
Air pattern
(with isothermal air supply)
bh= L0.3 x 0.03
Lbh = L0.3 x 0.5
bv = L0.3 x 0.05
Lbv = L0.3 x 0.4
b hb v
Lbh
Lbv
ACOUSTIC TRANSFER GRILLE1.51
ATJ
Page. 32Note! Shaded areas indicate standard product.
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
770 X 130
930 X 130
770 X 180
930 X 180
Product Size Numbers"Y" Size
"Type" "X" Size 05(130)
07(180) Colour
ATJ 31 (770) Powder coat white37 (930)
Special colours
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal face sizes of the grille, see overleaf)
Example: If your requirement is for a 31” x 7” (770 x 180) acoustic transfer grille, the ordering code wouldbe ATJ3107. {When ordering it is not necessary to include the periods [..])
ACOUSTIC TRANSFER GRILLE1.51
ATJ
Page. 33 Bradflo reserves the right to make changes to product without prior notice
Description
The 1.51 (ATJ) grille is a rectangular air transferdevice for mounting directly on walls. The grille isdouble sided and identical both sides.The construction allows a very small sound transmi-tion area in relation to the air flow. This results inneglible deterioration of the wall’s original soundreduction factor.The grille may be used regardless of the wall thick-ness
Finish
Standard finish is white electrostatic powdercoat.There are also 15 other colours to choose from atno additional cost.Contact your local Bradflo branch for any specialrequirement you may have.
Design dimensions
Size X Y L S1 kgA 770 130 700 0.0350 3.0B 930 130 800 0.0430 3.6C 770 180 700 0.0400 3.2D 930 180 800 0.0500 3.8
Net reduction loss (S1 = transmission area)
ACOUSTIC TRANSFER GRILLE1.51
ATJ
Page. 34Bradflo reserves the right to make changes to product without prior notice
10 100
Flow Rate (l/s)
5
50
Static Pressure (Pa)
40
20 50 200 300
20
10
250
100
35
30
20
25
A B
C
D
Size
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
All +5 +7 +2 -2 -7 -21 -21Tol +/- 2 2 2 2 2 2 2Correction factor kok
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Performance graph
Size R1 R1m
Mid band frequency in Hz125 250 500 1000 2000
A & C 11 15 22 23 39 22B & D 11 14 21 23 40 22
Table 1 shows the reduction factors R1 and themean reduction factor R1m relative to the transmis-sion area S1 of the air transfer grille.
Table 2 shows the reduction factors R2 and themean reduction factor R2m and the Ia value relative
to the transmission area of 2m2.
Size R1 R1m IaMid band frequency in Hz
125 250 500 1000 2000A & C 11 15 22 23 39 22 37B & D 11 14 21 23 40 22 35
Sound measurements are carried out in accordancewith the ISO-Standard 3741 method 2 and ASHRAE36-72
These graphs are for selection only and should not be used for commissioning.
ALUMINIUM DOOR REGISTER1.52
AADR
Page. 35
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
150210
250
610450
310
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
10(250)
12(300)
16(400)
18(450)
20(500)
22(550)
24(600) Colour
AADR 12 (300)
18 (450)
24 (600) Natural Anodised
Special sizes
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the register, see over leaf)
Example: If your requirement is for a 24” x 12” (600 x 300) aluminium door register, the ordering codewould be AADR2412. {When ordering it is not necessary to include the periods [..])
ALUMINIUM DOOR REGISTER1.52
AADR
Page. 36 Bradflo reserves the right to make changes to product without prior notice
Description
The 1.52 (AADR) door registers have horizontallymounted blades firmly fixed into a frame. To ensurea pleasing appearance an adjustable rear framecovers the opening on the opposite side of the door.A unique spring clip method eliminates the need forscrews of any sort when fixing the register to thedoor.All registers are manufactured from naturalanodised aluminium extrusion and will fit doors from30mm to 45mm thick.The blade profiles ensure maximum air flows atminimum sound levels.
Finish
Standard finish is natural anodised. There are also15 other colours to choose from at no additionalcost.Contact your local Bradflo branch for any specialrequirement you may have.
Design dimensions
Design dimensions
ALUMINIUM DOOR REGISTER1.52
AADR
Page. 37Bradflo reserves the right to make changes to product without prior notice
Installation
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
All +15 +14 +12 +7 +1 -4 -6Tol +/- 2 2 2 2 2 2 2
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Correction factor Kok
Opening Size Free Area600 x 150 0.062600 x 210 0.093600 x 250 0.114600 x 310 0.145600 x 450 0.216600 x 610 0.300
Free Area Factor
To calculate the free area, the grilles’ nominal areais multiplied by f1 where f1 is a correction factor andis determined by the graph below. The free area ofstandard sizes may be found adjacent.
0 100 200 300 400 500 600 700
Nominal size
0.6
0.65
0.7
0.75
0.8
0.85Correction Factor
ALUMINIUM DOOR REGISTER1.52
AADR
Page. 38 Bradflo reserves the right to make changes to product without prior notice
10 100 1000
Flow Rate (l/s)
1
10
100Static Pressure (Pa)
50 2000
150 210 250 310 450 610
40
25
35
50
5
20
50020 200
Performance data
These graphs are for selection only and should not be used for commissioning.
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Other terminal velocities maybe calculated using formulas in Section 4.2 ofthe Air Handling Reference Guide. Throw isgiven for equal slots in each direction.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
WEATHER LOUVRE1.61
AWL
Page. 39
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 30 35 40 45m2
0.10
4.002.00
1.000.50
0.20
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
10(250)
12(300)
16(400)
18(450)
20(500)
24(600) Colour
AWLF (standard) 06 (150)AWLC (recessed) 08 (200)
10 (250) Natural anodised12 (300)16 (400)18 (450)20 (500)24 (600) Special colours
Special sizes
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the louvre, see overleaf.)
Example: If your requirement is for a 24” x 12” (600 x 300) weather louvre, the ordering code would beAWLF2412. {When ordering it is not necessary to include the periods [..])
WEATHER LOUVRE1.61
AWL
Page. 40 Bradflo reserves the right to make changes to product without prior notice
DescriptionThe 1.61 weather louvre has been designed toensure minimum ingress of water whilst maintainingmaximum air flow at low noise levels.The weather louvre may be used for supply orexhaust applications.Standard weather louvre’s are manufactured witheither flanged frame for surface mounting or chan-nel frame for recess mounting.Blades and frames are manufactured from extrudedaluminium.
FinishStandard finish is natural anodised. There are 15other colours available.Contact your local Bradflo branch for any specialrequirement you may have.
Design and mm dimensionsMost sizes can be manufactured, however, contactyour nearest Bradflo branch with your special sizes.Bird wire is fitted to the rear of the weather louvreas standard.
Design dimensions (flanged frame)
Design dimensions (recessed frame)
WEATHER LOUVRE1.61
AWL
Page. 41Bradflo reserves the right to make changes to product without prior notice
100 1000 10000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
500
0.1 0.2 0.3 0.5 0.75 1.0 1.5 2.0
40
25
35
150
20
5000
4550
3.0
4.0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
Nominal "Y" size
0.3
0.4
0.5
0.6
0.7
0.8Correction Factor To calculate the free area
the louvre’s’ nominal area ismultiplied by f1 where f1 is acorrection factor and isdetermined by the graph.
Free Area Factor
Performance graph
These graphs are for selection only and should not be used for commissioning.
VERTICAL WEATHER LOUVRE1.62
AWLV
Page. 42
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 30 35 40 45m2
0.10
4.002.00
1.000.50
0.20
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
10(250)
12(300)
16(400)
18(450)
20(500)
24(600) Colour
AWLV (standard) 06 (150)AWLVC (recessed) 08 (200) Standard
10 (250) Natural anodised12 (300)16 (400)18 (450)20 (500)24 (600) Special colours
Special sizes
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the louvre, see overleaf)
Example: If your requirement is for a 24” x 12” (600 x 300) face mounted vertical weather louvre, theordering code would be AWLV2412. {When ordering it is not necessary to include the periods [..])
VERTICAL WEATHER LOUVRE1.62
AWLV
Page. 43 Bradflo reserves the right to make changes to product without prior notice
DescriptionThe 1.62 vertical weather louvre has been designedto ensure minimum ingress of water whilst maintain-ing maximum air flow at low noise levels.The weather louvre may be used for supply orexhaust applications where vertical blades are arequirement..Standard weather louvre’s are manufactured witheither flanged frame for surface mounting or chan-nel frame for recess mounting.Blades and frames are manufactured from extrudedaluminium.
FinishStandard finish is natural anodised. There are 15other colours available.Contact your local Bradflo branch for any specialrequirement you may have.
Design and mm dimensionsMost sizes can be manufactured, however, contactyour nearest Bradflo branch with your special sizes.Bird wire is fitted to the rear of the weather louvreas standard.
Design dimensions (flanged frame) Design dimensions (recessed frame)
VERTICAL WEATHER LOUVRE1.62
AWLV
Page. 44Bradflo reserves the right to make changes to product without prior notice
100 1000 10000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
500
0.1 0.2 0.3 0.5 0.75 1.0 1.5 2.0
40
25
35
150
20
5000
4550
3.0
5.0
4.0
200 2000
50
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
Nominal "Y" size
0.3
0.4
0.5
0.6
0.7
0.8Correction Factor To calculate the free area
the louvre’s’ nominal area ismultiplied by f1 where f1 is acorrection factor and isdetermined by the graph.
Free Area Factor
Performance graph
These graphs are for selection and should not be used for commissioning.
DOUBLE TRAP WEATHERLOUVRE
1.63AWLD
Page. 45
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 30 35 40 45m2
0.10
4.002.00
1.000.50
0.20
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
10(250)
12(300)
16(400)
18(450)
20(500)
24(600) Colour
AWLD (standard) 06 (150)AWLDC (recessed) 08 (200) Standard
10 (250) Natural anodised12 (300)16 (400)18 (450)20 (500)24 (600) Special colours
Special sizes
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the louvre, see overleaf.)
Example: If your requirement is for a 24” x 12” (600 x 300) face mounted weather louvre, the orderingcode would be AWLD2412. {When ordering it is not necessary to include the periods [..])
DOUBLE TRAP WEATHERLOUVRE
1.63AWLD
Page. 46 Bradflo reserves the right to make changes to product without prior notice
DescriptionThe 1.63 double trap weather louvre has beendesigned to ensure minimum ingress of water whilstmaintaining maximum air flow at low noise levels.The weather louvre may be used for supply orexhaust applications.Standard weather louvre’s are manufactured witheither flanged frame for surface mounting or chan-nel frame for recess mounting.Blades and frames are manufactured from extrudedaluminium.
FinishStandard finish is natural anodised. There are also15 other colours to choose from. Contact your local Bradflo branch for any specialrequirement you may have.
Design and mm dimensionsMost sizes can be manufactured, however, contactyour nearest Bradflo branch with your special sizes.Bird wire is fitted to the rear of the weather louvreas standard.
Design dimensions (flanged frame)
Design dimensions (recessed frame)
DOUBLE TRAP WEATHERLOUVRE
1.63AWLD
Page. 47Bradflo reserves the right to make changes to product without prior notice
100 1000 10000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
500
0.1 0.2 0.3 0.5 0.75 1.0 1.5 2.0
40
25
35
150
20
5000
4550 3.0
5.0
4.0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
Nominal "Y" size
0.3
0.4
0.5
0.6
0.7
0.8Correction Factor To calculate the free area
the louvre’s’ nominal area ismultiplied by f1 where f1 is acorrection factor and isdetermined by the graph.
Free Area Factor
Performance graph
The graphs are for selection only and should not be used for commissioning.
NoteThe Double Rain Trap Weather Louvre water is resistant except where the air-flow exceeds the limits shown below.
Over 2.25m/s some water vapour may be carried over.Over 3.50m/s droplets formed on blades may be carried over.Over 4.25m/s the grille is no longer considered to be water resistant.
SLIMLINE WEATHER LOUVRE1.64
AWLS
Page. 48
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 30 35 40 45m2
0.10
4.002.00
1.000.50
0.20
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
10(250)
12(300)
16(400)
18(450)
20(500)
24(600) Colour
AWLSF 06 (150)08 (200) Standard10 (250) Natural anodised12 (300)16 (400)18 (450)20 (500)24 (600) Special colours
Special sizes
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..Y (X & Y are the nominal neck sizes of the louvre, see overleaf.)
Example: If your requirement is for a 24” x 12” (600 x 300) slimline flange mounted weather louvre, theordering code would be AWLSF2412. {When ordering it is not necessary to include the periods [..])
SLIMLINE WEATHER LOUVRE1.64
AWLS
Page. 49 Bradflo reserves the right to make changes to product without prior notice
DescriptionThe 1.64 slimline weather louvre has been designedto ensure a low ingress of water whilst maintainingmaximum air flow at low noise levels.The weather louvre may be used for supply orexhaust applications.Standard weather louvre’s are manufactured witheither flanged frame for surface mounting or chan-nel frame for recess mounting.Blades and frames are manufactured from extrudedaluminium.
FinishStandard finish is natural anodised. There are also15 other colours to choose from. Contact your local Bradflo branch for any specialrequirement you may have.
Design and mm dimensionsMost sizes can be manufactured, however, contactyour nearest Bradflo branch with your special sizes.Bird wire is fitted to the rear of the weather louvreas standard.
Design dimensions (flanged frame)
0 100 200 300 400 500 600 700 800 900 1000 1100 1200
Nominal "Y" size
0.5
0.55
0.6
0.65
0.7
0.75
0.8Correction Factor
To calculate the free area , the louvre’s nominal area is mul-tiplied by f1 where f1 is a correction factor and is determinedby the graph above.
These graphs are for selection only and should not be used for commissioning.
5FLEX
IBLE D
UC
TING
4FITTIN
GS &
AC
CESSO
RIES
Dam
pers, Equalisers & M
easures3
PLENU
MS
1G
RILLES &
LOU
VR
ES2
DIFFU
SERS
DIFFUSERSChapter Description Product Code
A-Blade linear diffuser ALDAPlenum diffuser AVPASingle air boot AABSDouble air boot AABDDirectional diffuser ACTDirectional diffuser ACBDirectional diffuser ACTLDirectional diffuser ACTBCirculate plate diffuser ACDSCCircular cone diffuser ACDRARound ceiling diffuser ARCDJet diffuser AJDJet diffuser AJAJet diffuser AJSPerforated diffuser APDPerforated exhaust grille APDEPerforated Circular diffuser APREnvironment 2000 exhaust grille APMEEnvironment 2000 diffuser APMFEnvironment 2000 diffuser with plenum APM2.66
2.65
2.64
2.63
2.62
2.61
2.53
2.52
2.51
2.43
2.42
2.41
2.37
2.36
2.35
2.31
2.22
2.21
2.13
2.12
HOMEHOME
Page. 6
A-BLADE LINEAR DIFFUSER2.12
ALDA
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..S (X & Y are the nominal neck sizes of the diffuser, see overleaf.) For corners the ordering codeis Type..S .
Example: If your requirement is for a 2 slot linear diffuser with one end and 1200mm long, the orderingcode would be ALDA1E482. {When ordering it is not necessary to include the periods [..]). For a 2 slot 90ocorner the ordering code would be ALDA902.
Note! Other sizes are available. Please contact your nearest Bradflo office.
Product Size NumbersNumber of slots, "S"
"Type" "X" Size 1 2 3 4 5 6 7 8 Colour
ALDA2E (2 ends) 24 (600) Powder coat white
ALDA1E (1 end) 36 (900) Black internal blades
ALDA0E (0 ends) 48 (1200)
72 (1800)
108 (2700)
ALDAC90 (900 corner)
ALDAC135 (1350 corner)
Special colours
Special sizes
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
Horizontal 1 - way1 slot x 1000
4 slot x 1000
3 slot x 1000
2 slot x 1000
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description2.12 ALDA ALDA251000-1-2P 3209582 ALDA25 1 SLOT 1000 NOMINAL* COL RAL 9016
ALDA251000-2-2BP 3209553 ALDA25 2 SLOT LIN 1000 FACE * COL M/BLKALDA251000-2-2P 3209590 ALDA25 2 SLOT LIN 1000 NOM* COL RAL 9016ALDA251000-4-2P 3209599 ALDA25 4 SLOT LIN 1000 NOM* COL RAL 9016ALDA251195-2-2P 3209592 ALDA25 2 SLOT LIN 1195 FACE COL RAL9016ALDA251195-3-2P 3209567 ALDA25 3 SLOT LIN 1195 * COL RAL 9016ALDA251200-2-2P 3209593 ALDA25 2 SLOT LIN 1200 NOM COL RAL9016ALDA251200-3-2P 3209597 ALDA25 3 SLOT LIN 1200 NOM COL RAL 9016ALDA251500-2-2P 3209598 ALDA25 2 SLOT LIN 1500 NOM COL RAL 9016ALDA252000-4-2P 3209602 ALDA25 4 SLOT LIN 2000 NOM COL RAL 9016ALDA252450-2-2P 3209572 ALDA25 2 SLOT LIN 2450 FACE COL M/BLKALDA252650-2-2P 3209574 ALDA25 2 SLOT LIN 2650 FACE COL M/BLKALDA252665-2-2P 3209575 ALDA25 2 SLOT LIN 2665 FACE COL M/BLKALDA253315-2-2P 3209576 ALDA25 2 SLOT LIN 3315 FACE COL M/BKALDA253335-2-2P 3209577 ALDA25 2 SLOT LINEAR 3335 FACE COL M/BLKALDA253350-2-2P 3209578 ALDA25 2 SLOT LIN 3350 FACE COL M/BLKALDA253355-2-2P 3209579 ALDA25 2 SLOT LIN 3355 FACE COL M/BLKALDA256450-2-2P 3209591 ALDA25 2 SLOT LIN 6450 FACE COL RAL 9016
ALDA257100-2-2BP 3209594 ALDA25 2 SLOT LIN 7100 FACE COL M/BLKALDA257100-2-2P 3209595 ALDA25 2 SLOT LIN 7100 FACE COL RAL 9016ALDA25900-2-2BP 3209550 ALDA25 2 SLOT LIN 900 FACE COL M/ BLKALDA25900-2-2P 3209589 ALDA25 2 SLOT LIN 900 NOM COL RAL 9016
ALDA25BKT2S 3214190 STAY LDA 25MM 2 SLOT * 20112ALDA25BKT3S 3214194 STAY LDA 25MM 3 SLOT * 20113ALDA25BKT4S 3214193 STAY LDA 25MM 4 SLOT * 20114ALDA25PCB2S 3211307 ALDA25 PLAST. CEIL. BRACKET 2 SLOTALDA25PCB3S 3211309 ALDA25 PLAST. CEIL. BRACKET 3 SLOTALDA25PCB4S 3211310 ALDA25 PLAST. CEIL. BRACKET 4 SLOTALDAFLIPPER 3214216 ALX 10553 BA LDA FLIPPERALDAFRAME 3214245 ALX 10597 MF LDA FRAME
Metalflex Coded Products
Page. 7 Bradflo reserves the right to make changes to product without prior notice
A-BLADE LINEAR DIFFUSER2.12
ALDA
Description
The 2.12 (ALDA) linear diffuser is a versatile prod-uct designed for supply, return or exhaust air sys-tems.The design incorporates concealed aligning key-ways for continuous application. Center T-rails areeasily removed to simplify installation.The blades are adjustable to facilitate an air patternthrough 180o.Maximum length of each individual piece is2700mm.Please discuss your requirement with your nearestBradflo office.
Finish
Standard finish is natural anodised or white electro-static powdercoat. There are also 15 other coloursto choose from at no additional cost. Contact your local Bradflo branch for any specialrequirement you may have.
Slot A B C D1 40 53 77 502 78 53 115 883 116 53 153 1264 154 53 192 1645 192 53 230 2026 230 53 268 2407 269 53 306 2798 307 53 344 317
Design dimensions
Page. 8Bradflo reserves the right to make changes to product without prior notice
A-BLADE LINEAR DIFFUSER2.12
ALDA
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
bh= L0.3 x 0.02 + length
Lbh = L0.3 x 0.7
bv = L0.3 x 0.07
Lbv = L0.3 x 0.6
Frequency (cycles per second)No. Slots 125 250 500 1000 2000 4000 8000
1 +22 +12 +10 +6 +5 -2 -62 +23 +14 +10 +6 +5 -2 -63 +20 +15 +10 +6 +5 -1 -64 +21 +14 +10 +6 +5 0 -76 +21 +14 +10 +6 +5 0 -78 +20 +14 +10 +6 +5 -5 -6
Tol +/- 2 2 2 2 2 2 2Correction factor Kok
Data shown in engineering graphs is for lengths of1000 mm. For other lengths, refer to the correctiontables below.
b h
Lbh
Lbvb v
Model 2.12 is a diffuser which provides variable airflow pattern controls by means of individually oper-ated blades. This type of control does afford somedegree of volume adjustment.
The design of the blades is such that noise genera-tion is kept to a minimum.
Diffuser length (m) 0.5 1 1.5 2 3Add to NR value -3 0 +2 +3 +5Multiply throw by 0.7 1 1.25 1.4 1.55
Diffuser length (m) 0.5 1 1.5 2 3Add to NR value -3 0 +2 +3 +5Multiply throw by 0.7 1 1.2 1.4 1.5
Diffuser length (m) 0.5 1 1.5 2 3Add to NR value -3 0 +2 +3 +5
Correction tables
Horizontal pattern
Vertical pattern
Return air
Page. 9 Bradflo reserves the right to make changes to product without prior notice
A-BLADE LINEAR DIFFUSER2.12
ALDA
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Throw is given for equal slotsin each direction.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
5
50
Static Pressure (Pa)
50
1 2 3 4
40
35
250
30
500
20
10
100
25
20
6 - 12
5 - 10
4 - 8
3 - 6
2.5 - 5
2 - 4
20020
(No. Slots x 1000mm)Refer to correction tables for other lengths.
10 100 1000
Flow Rate (l/s)
5
50
Static Pressure (Pa) 2 4 6 8
40
35
250
30
2000
20
10
100
25
20
6 - 12
5 - 10
4 - 8
3 - 6
2.5 - 5
2 - 4
50 500
(No. Slots x 1000mm)Refer to correction tables for other lengths.
ALDA horizontal 1-way pattern
ALDA horizontal 2-way pattern
Page. 10Bradflo reserves the right to make changes to product without prior notice
A-BLADE LINEAR DIFFUSER2.12
ALDA
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Throw is given for equal slotsin each direction.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa) 1 2 3 4 5 6 7 8
40
35
250
30
2000
50
5
25
20
9 - 148 - 12
7 - 116 - 10
5 - 8
2 - 3.5
50 500
3 - 5
4 - 6.5
(No. Slots x 1000mm)Refer to correction tables for other lengths.
10 100 1000
Flow Rate (l/s)
1
10
100Static Pressure (Pa) 1 2 3 4 5 6 7
4035
30
500
50
5
25
20
50 20020
8
(No. Slots x 1000mm)Refer to correction tables for other lengths.
ALDA vertical projection
ALDA return air
Page. 11
PLENUM DIFFUSER2.13
AVPA
Ordering procedure
Using the chart below select your requirement and substitute the underscored text below.Type..S..X..I (X is the overall length of the diffuser.)
Example: If your requirement is for a 2 slot insulated plenum diffuser 1200mm long with a 225 dia. inlet, theordering code would be AVPAI24809. {When ordering it is not necessary to include the periods [..]).
Note! Other sizes are available. Please contact your nearest Bradflo office.
Product Size NumbersNumber of slots "S" Inlet diameter "I"
"Type" "X" Size 1 2 08(200)
09(225)
10(250) Colour
AVPA (uninsulated) 24 (600)AVPAI (insulated) 36 (900)
48 (1200)
Special lengths
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
1 slot x 600
2 slots x 9002 slots x 600
1 slot x 12001 slot x 900
2 slots x 1200
Horizontal 1 way blow
Page. 12 Bradflo reserves the right to make changes to product without prior notice
PLENUM DIFFUSER2.13
AVPA
Description
The 2.13 (AVPA) is a linear plenum diffuserdesigned to suit ceiling T-Bar systems. It has beendesigned specifically for perimeter air distributionsystems although it can be used for other applica-tions.
Special consideration has been given to the variousT-Bar ceiling systems in common use. The 2.13 iscompatible with T-Bar face sizes from 25 to 30 mm.The insulation is 25mm thick glasswool with theends uninsulated. Other types of insulation areavailable
The 2.13 diffusers are designed to handle maximumair quantities at the lowest practicable sound levelsand are available in either one or two slot configura-tions.All diffusers are manufactured from galvanised steeland aluminium. The blade position is adjustablethrough the face of the diffuser.
FinishAll visible surfaces in situ are painted black.
Design dimensions AVPAI Insulated
Page. 13Bradflo reserves the right to make changes to product without prior notice
PLENUM DIFFUSER2.13
AVPA
Slots Size OverallLength
B InletDiameter
1 600-200 600 250 2001 900-200 900 250 2001 900-225 900 275 2251 1200-200 1190 250 2001 1200-225 1190 275 2251 1200-250 1190 300 2502 600-200 600 250 2002 900-200 900 250 2002 900-225 900 275 2252 1200-200 1190 250 2002 1200-225 1190 275 2252 1200-250 1190 300 250
Standard sizes available.
Design Dimensions AVPA Non Insulated
Bradflo reserves the right to make changes to product without prior notice
PLENUM DIFFUSER2.13
AVPA
Page. 14
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
bh= L0.3 x 0.02 + length
Lbh = L0.3 x 0.6
bv = L0.3 x 0.08
Lbv = L0.3 x 0.5
Frequency (cycles per second)No. Slots 125 250 500 1000 2000 4000 8000
1 +14 +16 +11 +6 +5 0 02 +15 +12 +8 +6 +5 -5 -21
Tol +/- 2 2 2 2 2 2 2Correction factor Kok
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The orifice loss is included in the values.
Frequency (cycles per second)No. Slots 125 250 500 1000 2000 4000 8000
1 14 9 9 15 15 15 142 14 10 9 13 7 10 11
Tol +/- 2 2 2 2 2 2 2
b h
Lbh
Lbv
b v
Page. 15Bradflo reserves the right to make changes to product without prior notice
PLENUM DIFFUSER2.13
AVPA
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
40
20 50 150
5
150
5035
30
20
25
600Size900
1200
4 - 8
5 - 10
3 - 6
2.5 - 5
2 - 4
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
40
20 50 150
5
150
5035
30
20
25
600Size900
1200
4 - 8
3 - 6
2.5 - 5
2 - 4
1.5 - 3
10 100
Flow Rate (l/s)
5
50
Static Pressure (Pa)
40
20 50 200
20
250
100
35
30
20
25
600 900 1200Size
4 - 8
3 - 6
2.5 - 5
2 - 4
3.5 - 7
5 - 10
AVPA 2 Slots 1-way blow AVPA 2 Slots 2-way blow
AVPA 1 Slots 1-way blow
These graphs are for selection only and should not be used for commissioning.
Page. 16
SINGLE AIR BOOT2.21
AABS
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
AABS TYPE A
AABS TYPE B
AABS TYPE C
Product Size NumbersInlet diameter "I"
"Type" "X" Size 05(125)
06(150)
07(175)
08(200)
10(250) Colour
AABSA (single 20mm slot) 24 (600)AABSB (single 12mm slot) 36 (900)AABSC (single 20mm 180 o
deflection)48 (1200)
Special lengths
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..I (X is the overall length of the air boot).
Example: If your requirement is for a 1200mm long diffuser with a 200 dia. inlet, to suit a 12mm slot 90oblow, the ordering code would be AABSB4808. {When ordering it is not necessary to include the periods[..]).
Note! Other sizes are available. Please contact your nearest Bradflo office.
Min 20 25 30 35
Bradflo reserves the right to make changes to product without prior notice
SINGLE AIR BOOT2.21
AABS
Page. 17
Description
The 2.21 (AABS) diffusers are designed to be fittedto recessed fluorescent light fittings. They may alsobe used in conjunction with a ceiling T-Bar system.
Full details of the light fittings must be provide toensure the correct interface of the light with the airboot. This is essential to ensure optimum air distribu-tion performance is obtained from the combination.
Insulated versions of the diffuser plenum are notinsulated at the ends.
Three basic types of blade and slot width provide airflow direction of 90o up to 180o.
All diffusers are manufactured from galvanised sheetsteel and aluminium blades which may be adjustedvia the outlet slot.
Australian standard
The 2.21 diffuser complies with the requirements ofthe Australian Standard AS 2946 - 1987
Finish
All visible surfaces are painted flat black.
Type C - single side- 20 mm slot- 0 to 180o air deflection
Type A - single side- 20 mm slot- 0 to 90o air deflection
Type B - single side- 12 mm slot- 0 to 90o air deflection
Design dimensions
SINGLE AIR BOOT2.21
AABS
Page. 18Bradflo reserves the right to make changes to product without prior notice
Frequency (cycles per second) Hz
Size 125 250 500 1000 2000 4000 8000
A -Single +9 +14 +12 +3 +3 -9 -28
B -Single +13 +10 +9 -1 -2 -18 -22
C -Single +13 +10 +9 -1 -2 -18 -22
Tol +/- 2 2 2 2 2 2 2
Frequency (cycles per second) Hz
Size 125 250 500 1000 2000 4000 8000
A -Single 13 9 4 0 0 0 0
B -Single 14 10 5 1 0 0 0
C -Single 14 10 5 1 0 0 0
Tol +/- 2 2 2 2 2 2 2
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
bh= L0.3 x 0.02 + length
Lbh = L0.3 x 0.6
bv = L0.3 x 0.08
Lbv = L0.3 x 0.5
Sound absorption ΔL dB
The sound absorption shown relates to a reduction ofthe sound power level calculated from duct to room.The end reflection is included in the values.
b h
Lbh
Lbvb v
8
5 140
Dimensions for the keyhole slot for fitting.
Correction factor Kok
SINGLE AIR BOOT2.21
AABS
Page. 19 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
AABD Type A AABD Type B
AABD Type C
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
40
20 50 200
5
250
50 35
30
20
25
20mm Slot x 1200mm
3 - 6
1.5 - 3
2.5 - 5
2 - 4
10 100Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
40
20 50
5
250
50
3530
20
25
12mm Slot x 1200mm
1.5 - 3
2.5 - 5
2 - 4
1 - 2
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
40
20 50 200
5
250
50
35
30
20
25
20mm Slot x 1200mm
3 - 6
1.5 - 3
2.5 - 5
2 - 4
Page. 20
DOUBLE AIR BOOT2.22
AABD
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
AABS TYPE A
AABS TYPE B
AABS TYPE C
Min 20 25 30 35
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..I + (the distance between the two inside faces of the diffuser, to suit the luminaire) (X is the over-all length of the diffuser).
Example: If your requirement is for a 1200mm long diffuser with a 200 dia. inlet, 12mm slot 900 blow with300 mm between the diffusers, the ordering code would be AABDB4808 + 300. {When ordering it is notnecessary to include the periods [..]).
Note! Other sizes are available. Please contact your nearest Bradflo office.
Product Size NumbersInlet diameter "I"
"Type" "X" Size 05(125)
06(150)
07(175)
08(200)
10(250) Colour
AABDA (single 20mm slot) 24 (600)AABDB (single 12mm slot) 36 (900)AABDC (single 20mm 180 o
deflection)48 (1200)
Special lengths
DOUBLE AIR BOOT2.22
AABD
Page. 21 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.22 (AABD) diffusers are designed to be fittedto recessed fluorescent light fittings. They may alsobe used in conjunction with a ceiling T-Bar system.
Full details of the light fittings must be provided toensure the correct interface of the light with the airboot. This is essential to ensure optimum air distribu-tion performance is obtained from the combination.
Insulated versions of the diffuser plenum are notinsulated at the ends.
Three basic types of blade and slot width provide airflow direction of 90o up to 180o.
All diffusers are manufactured from galvanised sheetsteel and aluminium blades which may be adjustedvia the outlet slot.
Australian standard
The 2.22 diffuser complies with the requirements ofthe Australian Standard AS 2946 - 1987
Finish
All visible surfaces are painted flat black.
Type A - double sided- 20 mm slot-0 to 90o deflection
Type B - double sided- 12 mm slot-0 to 90o deflection
Type C - double sided- 20 mm slot-0 to 180o deflection
Note! These sizes are available as standard prod-ucts. Variations are available upon request.Contact Bradflo with your specific requirements.
DOUBLE AIR BOOT2.22
AABD
Page. 22Bradflo reserves the right to make changes to product without prior notice
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
bh= L0.3 x 0.02 + length
Lbh = L0.3 x 0.6
bv = L0.3 x 0.08
Lbv = L0.3 x 0.5
Sound absorption ΔL dB
The sound absorption shown relates to a reduction ofthe sound power level calculated from duct to room.The end reflection is included in the values.
b h
Lbh
Lbvb v
Frequency (cycles per second)No. Slots 125 250 500 1000 2000 4000 8000ADouble +10 +15 +12 +1 -1 -16 -25BDouble +10 +7 +7 _8 -2 -15 -26CDouble +14 +17 +9 +5 -2 -16 -27Tol +/- 2 2 2 2 2 2 2
Frequency (cycles per second)No. Slots 125 250 500 1000 2000 4000 8000ADouble 13 9 4 0 0 0 0BDouble 13 9 4 0 0 0 0CDouble 13 9 4 0 0 0 0Tol +/- 2 2 2 2 2 2 2
Correction factor Kok
DOUBLE AIR BOOT2.22
AABD
Page. 23 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
40
20 50 300
5
250
50
35
30
20
25
20mm Slot x 1200mm
3 - 6
1.5 - 3
2.5 - 5
2 - 4
200 10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
40
20 50 200
5
250
50
35
30
20
25
12mm Slot x 1200mm
1 - 2
1.5 - 3
2.5 - 5
2 - 4
0.5 - 1
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
40
20 50 300
5
250
5035
30
20
25
20mm Slot x 1200mm
3 - 6
1.5 - 3
2.5 - 5
2 - 4
200
AABD Type A AABD Type B
AABD Type C
DIRECTIONAL DIFFUSER2.31
ACT
Page. 24
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.ACT..T..B..X..Y (X & Y are the nominal neck sizes of the diffuser, see overleaf.)
Example: If your requirement is for a 12” x 12” (300mm x 300mm) 2 Way Corner blow diffuser, the orderingcode would be ACT2C1212. {When ordering it is not necessary to include the periods [..])
Product Size Numbers"Y" Size
"T" Type "B" "X" Size 06 09 12 15 18 21 24 Colour
1 1 Way blow W 06 (150) Powdercoat White
2 2 Way blow W 09 (225)
2 2 Way corner blow C 12 (300)
3 3 Way blow W 15 (375
4 4 Way blow W 18 (450)
21 (525)
Special blow 24 (600) Special colours
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
150
450525
600
375300
225
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description2.31 ACT ACT4W0606P 3214037 BRADFLO AIR DIFF. LAY-IN 4 WAY 150 x 150
ACT4W0909P 3215216 BRADFLO AIR DIFF. LAY-IN 4 WAY 225 x 225ACT4W1212P 1604688 BRADFLO AIR DIFF. LAY-IN 4 WAY 300 x 300ACT4W1818P 1604690 BRADFLO AIR DIFF. LAY-IN 4 WAY 300 x 300
Metalflex Coded Products
DIRECTIONAL DIFFUSER2.31
ACT
Page. 25 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.31 (ACT) square cone type directional dif-fuser is all aluminium construction and has beendesigned to meet modern building requirements.
Standard frame configurations are available whichare suitable for T-bar, tile or plaster ceilings.
To maximize versatility, the 2.31 series diffusersallow different blow patterns.
The core section is removable for easy installationand maintenance.
As with all Bradflo air products, this diffuser offersmaximum air flow characteristics whilst maintaininglow noise levels.
FinishThe standard finish is powdercoat white, baked at atemperature of 180 deg. C. There are fifteen otherstandard colours available.
Other colours are available as specials uponrequest.
Note! Blanking plates are available for all diffusertypes as a special order.Refer to following pages for performance data.
Type 1 Type 2 Type 2C Type 3 Type 4
DIRECTIONAL DIFFUSER2.31
ACT
Page. 26Bradflo reserves the right to make changes to product without prior notice
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
bh= L0.3 x 0.03
Lbh = L0.3 x 0.65
bv = L0.3 x 0.06
Lbv = L0.3 x 0.65
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000150 +17 +13 +10 +8 +3 -5 -15225 +14 +11 +10 +8 +1 -10 -16300 +13 +9 +9 +8 -3 -15 -18450 +13 +9 +11 +7 -6 -21 -21525 +12 +8 +10 +7 -4 -23 -24600 +12 +7 +9 +7 -4 -23 -24
Tol +/- 2 2 2 2 2 2 2
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000150 14 10 5 1 0 0 0225 13 9 4 0 0 0 0300 10 6 2 0 0 0 0450 9 5 1 0 0 0 0525 7 3 1 0 0 0 0600 6 3 1 0 0 0 0
Tol +/- 2 2 2 2 2 2 2
b hb v
Lbh
Lbv
Correction factor Kok
DIRECTIONAL DIFFUSER2.31
ACT
Page. 27 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
The following graphs apply to all BradfloDirectional Diffusers in sections 2.31 to 2.37.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450 52540
35
150
30
2000
5
5025
204.5 - 9
4 - 8
3.5 - 7
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
600
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450 525 60040
35
150
30
2000
5
5025
20 4.5 - 94 - 8
3.5 - 7
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
4-way pattern (square)
4-way pattern (square) blanked to 3-way blow
DIRECTIONAL DIFFUSER2.31
ACT
Page. 28Bradflo reserves the right to make changes to product without prior notice
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450 52540
35
15030
5
5025
204.5 - 9
4 - 8
3.5 - 7
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
200
600
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450 525 60040
35
15030
5
5025
20 4.5 - 94 - 8
3.5 - 7
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
200
4-way pattern (square) blanked to a 2-way blow
4-way pattern (square) blanked to a 1-way blow
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
The following graphs apply to all BradfloDirectional Diffusers in sections 2.31 to 2.37.
DIRECTIONAL DIFFUSER2.31
ACT
Page. 29 Bradflo reserves the right to make changes to product without prior notice
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150x300 150x450 225x525 300x60040
35
150
30
2000
5
5025
204.5 - 9
4 - 8
3.5 - 7
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
5 - 10
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450
40
35
150
30
2000
5
5025
20
5 - 10
4 - 83 - 6
50020
2 - 4
6 - 12
4-way pattern (rectangular)
1-way pattern (square)
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
The following graphs apply to all BradfloDirectional Diffusers in sections 2.31 to 2.37.
DIRECTIONAL DIFFUSER2.31
ACT
Page. 30Bradflo reserves the right to make changes to product without prior notice
These graphs are for selection only and should not be used for commissioning.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450
40
35
150
30
2000
5
5025
20
4 - 8
3 - 6
2.5 - 5
50020
2 - 4
5 - 10
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450
40
35
150
30
2000
5
5025
20
2.5 - 5
2 - 4
1.5 - 3
50020
1 - 2
4.5 - 94 - 8
3.5 - 7
3 - 6
2-way pattern (square)
3-way pattern (square)
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
The following graphs apply to all BradfloDirectional Diffusers in sections 2.31 to 2.37.
DIRECTIONAL DIFFUSER2.35
ACB
Page. 31
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
150
450525
600
375300
225
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.ACB..T..B..X..Y (X & Y are the nominal neck sizes of the diffuser, see overleaf.)
Example: If your requirement is for a 12” x 12” (300mm x 300mm) 2 Way Corner blow diffuser, the orderingcode would be ACB2C1212. {When ordering it is not necessary to include the periods [..])
Product Size Numbers"Y" Size
"T" Type "B" "X" Size 06 09 12 15 18 21 24 Colour
1 1 Way blow W 06 (150) Powdercoat White
2 2 Way blow W 09 (225)
2 2 Way corner blow C 12 (300)
3 3 Way blow W 15 (375
4 4 Way blow W 18 (450)
21 (525)
Special blow 24 (600) Special colours
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description2.35 ACB ACB2W1515P 3214112 BEVEL DIFF 2 WAY 375X375
ACB2W1818P 3214121 BEVEL DIFF 2 WAY 450X450ACB3W0909P 3214118 BEVEL DIFF 3 WAY 225X225 ALUMACB3W1212P 3214128 BEVEL DIFF 3 WAY 300X300 ALUMACB3W1515P 3214580 BEVEL DIFF 3 WAY 375X375 ALUMACB4W0606 3214369 BEVEL DIFF 4 WAY 150X150 ALUM
ACB4W0606P 3214067 BEVEL DIFF 4 WAY 150X150ACB4W0909P 3214109 BEVEL DIFF 4 WAY 225X225 ALUMACB4W1212P 3214123 Bradflo Alum Bevel Diff. 4 Way 300 x 300ACB4W1515P 3214131 BEVEL DIFF 4 WAY 375X375 ALUMACB4W1818P 3214142 BEVEL DIFF 4 WAY 450X450 ALUM
Metalflex Coded Products
DIRECTIONAL DIFFUSER2.35
ACB
Page. 32 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.35 (ACB) square cone type directional dif-fuser is all aluminium construction and has beendesigned to meet modern building requirements.
The standard bevel frame is suitable for tile or plas-ter ceilings.
To maximise versatility, the 2.35 series diffuseroffers a number of different blow patterns.
The core section is removable for easy installationand maintenance.
As with all Bradflo air products, this diffuser offersmaximum air flow characteristics whilst maintaininglow noise levels.
FinishThe standard finish is powdercoat white, baked at atemperature of 180 deg. C. There are fifteen otherstandard colours available.
Other colours are available as specials uponrequest.
Note! Blanking plates are available for all diffusertypes as a special order.Refer to following pages for performance data.
Type 1 Type 2 Type 2C Type 3 Type 4
DIRECTIONAL DIFFUSER2.36
ACTL
Page. 33
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
150
450525
600
375300
225
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.ACTL..T..W..X..Y (X & Y are the nominal neck sizes of the diffuser, see overleaf.)
Example: If your requirement is for a 12” x 12” (300mm x 300mm) 3 Way blow diffuser, the ordering codewould be ACTL3W1212. {When ordering it is not necessary to include the periods [..])
Product Size Numbers"Y" Size
"T" Type "X" Size 06 09 12 15 18 Colour
1 3 Way blow 06 (150) Powdercoat White
2 4 Way blow 09 (225)
12 (300)15 (37518 (450)
Special blow Special colours
DIRECTIONAL DIFFUSER2.36
ACTL
Page. 34 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.36 (ACTL) square cone type directional dif-fuser has an aluminium frame and steel core con-struction. It has been designed to meet modernbuilding requirements.
Standard frame configurations are available whichare suitable for T-bar, tile or plaster ceilings.
To maximise versatility, the 2.36 series diffuseroffers a number of different blow patterns.
The core section is removable for easy installationand maintenance.
As with all Bradflo air products, this diffuser offersmaximum air flow characteristics whilst maintaininglow noise levels.
FinishThe standard finish is powdercoat white, baked at atemperature of 180 deg. C. There are fifteen otherstandard colours available.
Other colours are available as specials uponrequest.
Note! Blanking plates are available for all diffusertypes as a special order.Refer to following pages for performance data.
Type 1 Type 2 Type 2C Type 3 Type 4
DIRECTIONAL DIFFUSER2.36
ACTL
Page. 35Bradflo reserves the right to make changes to product without prior notice
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
bh= L0.3 x 0.03
Lbh = L0.3 x 0.65
bv = L0.3 x 0.06
Lbv = L0.3 x 0.65
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000150 +17 +13 +10 +8 +3 -5 -15225 +14 +11 +10 +8 +1 -10 -16300 +13 +9 +9 +8 -3 -15 -18450 +13 +9 +11 +7 -6 -21 -21525 +12 +8 +10 +7 -4 -23 -24600 +12 +7 +9 +7 -4 -23 -24
Tol +/- 2 2 2 2 2 2 2
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000150 14 10 5 1 0 0 0225 13 9 4 0 0 0 0300 10 6 2 0 0 0 0450 9 5 1 0 0 0 0525 7 3 1 0 0 0 0600 6 3 1 0 0 0 0
Tol +/- 2 2 2 2 2 2 2
b hb v
Lbh
Lbv
Correction factor Kok
DIRECTIONAL DIFFUSER2.36
ACTL
Page. 36 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
The following graphs apply to all BradfloDirectional Diffusers in sections 2.31 to 2.37.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450 52540
35
150
30
2000
5
5025
204.5 - 9
4 - 8
3.5 - 7
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
600
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450 525 60040
35
150
30
2000
5
5025
20 4.5 - 94 - 8
3.5 - 7
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
4-way pattern (square)
4-way pattern (square) blanked to 3-way blow
DIRECTIONAL DIFFUSER2.36
ACTL
Page. 37Bradflo reserves the right to make changes to product without prior notice
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450 52540
35
15030
5
5025
204.5 - 9
4 - 8
3.5 - 7
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
200
600
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450 525 60040
35
15030
5
5025
20 4.5 - 94 - 8
3.5 - 7
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
200
4-way pattern (square) blanked to a 2-way blow
4-way pattern (square) blanked to a 1-way blow
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
The following graphs apply to all BradfloDirectional Diffusers in sections 2.31 to 2.37.
DIRECTIONAL DIFFUSER2.36
ACTL
Page. 38 Bradflo reserves the right to make changes to product without prior notice
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150x300 150x450 225x525 300x60040
35
150
30
2000
5
5025
204.5 - 9
4 - 8
3.5 - 7
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
5 - 10
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450
40
35
150
30
2000
5
5025
20
5 - 10
4 - 83 - 6
50020
2 - 4
6 - 12
4-way pattern (rectangular)
1-way pattern (square)
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
The following graphs apply to all BradfloDirectional Diffusers in sections 2.31 to 2.37.
DIRECTIONAL DIFFUSER2.36
ACTL
Page. 39Bradflo reserves the right to make changes to product without prior notice
These graphs are for selection only and should not be used for commissioning.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450
40
35
150
30
2000
5
5025
20
4 - 8
3 - 6
2.5 - 5
50020
2 - 4
5 - 10
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 225 300 375 450
40
35
150
30
2000
5
5025
20
2.5 - 5
2 - 4
1.5 - 3
50020
1 - 2
4.5 - 94 - 8
3.5 - 7
3 - 6
2-way pattern (square)
3-way pattern (square)
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
The following graphs apply to all BradfloDirectional Diffusers in sections 2.31 to 2.37.
DIRECTIONAL DIFFUSER2.37
ACTB
Page. 40
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
150
450525
600
375300
225
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.ACTB..T..W..X..Y (X & Y are the nominal neck sizes of the diffuser, see overleaf.)
Example: If your requirement is for a 12” x 12” (300mm x 300mm) 4 Way blow diffuser, the ordering codewould be ACTB4W1212. {When ordering it is not necessary to include the periods [..])
Product Size Numbers"Y" Size
"T" Type "X" Size 06 09 12 15 18 Colour
1 3 Way blow 06 (150) Powdercoat White
2 4 Way blow 09 (225)
12 (300)15 (37518 (450)
Special blow Special colours
DIRECTIONAL DIFFUSER2.37
ACTB
Page. 41 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.37 (ACTB) square cone type directional dif-fuser has an aluminium frame and steel core con-struction. It has been designed to meet modernbuilding requirements.
The standard bevel frame is suitable for tile or plas-ter ceilings.
To maximise versatility, the 2.37 series diffuseroffers a number of different blow patterns.
The core section is removable for easy installationand maintenance.
As with all Bradflo air products, this diffuser offersmaximum air flow characteristics whilst maintaininglow noise levels.
FinishThe standard finish is powdercoat white, baked at atemperature of 180 deg. C. There are fifteen otherstandard colours available.
Other colours are available as specials uponrequest.
Note! Blanking plates are available for all diffusertypes as a special order.Refer to following pages for performance data.
Type 1 Type 2 Type 2C Type 3 Type 4
CIRCULAR PLATE DIFFUSER2.41
ACDSC
Page. 42
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 10o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
125
400315
250200
160 Inlet Diameter
Product Size Numbers
"Type" "X" Size ColourACDSC 125 Powder coat white
160200250315400500
Special colours
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X (X is the nominal neck diameter of the diffuser).
Example: If your requirement is for a 200 mm diameter ceiling diffuser, the ordering code would beACDSC200 {When ordering it is not necessary to include the periods [..]).
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description2.41 ACDSC ACDSC200 3214656 CIRCULAR PLATE DIFFUSER 200
ACDSC315 3214957 CIRCULAR PLATE DIFFUSER 315ACDSC400 3214998 CIRCULAR PLATE DIFFUSER 400
Metalflex Coded Products
CIRCULAR PLATE DIFFUSER2.41
ACDSC
Page. 43 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.41 (ACDSC) diffuser is a adjustable singlecone diffuser which allows a horizontal pattern. Thecore of the diffuser is easily removed for fitting andcleaning.
The diffuser may be ceiling mounted or mounted inexposed duct work.
Standard construction is steel.
Finish
Standard finish is white powder coated paint appliedto a pre-treated surface and baked at 180o C toensure a tough surface that resists damage, fadingand discolouration.
Special colours are available. Contact your nearestBradflo office with your requirements.
Design dimensions
X Size Dia. B Dia. C D125 270 305 90160 270 305 80200 330 378 92250 420 477 107315 530 591 126400 630 703 138
CIRCULAR PLATE DIFFUSER2.41
ACDSC
Page. 44Bradflo reserves the right to make changes to product without prior notice
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
bv = L0.3 x 0.06
Lbv = L0.3 x 0.65
b v
Lbv
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000125 +23 +17 +11 +5 -1 -17 -18160 +24 +16 +10 +5 0 -8 -10200 +23 +17 +9 +4 0 -14 -15250 +22 +15 +9 +1 -1 -17 -20315 +23 +16 +10 -2 -3 -15 -15400 +21 +16 +12 -3 -9 -8 -15
Tol +/- 2 2 2 2 2 2 2
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000125 16 12 7 2 0 0 0160 14 10 5 1 0 0 0200 13 9 4 0 0 0 0250 11 7 3 0 0 0 0315 10 6 2 0 0 0 0400 9 5 1 0 0 0 0
Tol +/- 2 2 2 2 2 2 2
Correction factor Kok
CIRCULAR PLATE DIFFUSER2.41
ACDSC
Page. 45 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
125 160 200 250 315 400
4035
150
30
2000
5
5025
20
4 - 8
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
ASC Horizontal blow
CIRCULAR CONE DIFFUSER2.42
ACDRA
Page. 46
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 10o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
125
400315
250200
160 Inlet Diameter
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X (X is the nominal neck diameter of the diffuser).
Example: If your requirement is for a 200 mm diameter ceiling diffuser, the ordering code would beACDRA200 {When ordering it is not necessary to include the periods [..]).
Product Size Numbers
"Type" "X" Size ColourACDRA 125 Powder coat white
160200250315400500
Special colours
CIRCULAR CONE DIFFUSER2.42
ACDRA
Page. 47 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.42 (ACDRA) diffuser is a adjustable multiplecone diffuser which provides a horizontal and verti-cal pattern. The core of the diffuser is easilyremoved for fitting and cleaning.
The diffuser may be ceiling mounted or mounted inexposed duct work.
Standard construction is steel.
Finish
Standard finish is white powder coated paint appliedto a pre-treated surface and baked at 180o C toensure a tough surface that resists damage, fadingand discolouration.
Special colours are available. Contact your nearestBradflo office with your requirements.
Design dimensions
X Size Dia. B Dia. C D G H125 270 305 90 13 10160 270 305 80 13 10200 330 378 92 14 13250 420 477 107 17 16315 530 591 126 20 20400 630 703 138 24 24500 780 845 150 30 30
CIRCULAR CONE DIFFUSER2.42
ACDRA
Page. 48Bradflo reserves the right to make changes to product without prior notice
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
bv = L0.3 x 0.06
Lbv = L0.3 x 0.65
b v
Lbv
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000125 16 12 7 2 0 0 0160 14 10 5 1 0 0 0200 13 9 4 0 0 0 0250 11 7 3 0 0 0 0315 10 6 2 0 0 0 0400 9 5 1 0 0 0 0
Tol +/- 2 2 2 2 2 2 2
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000125 +14 +12 +11 +8 +4 -4 -8160 +14 +16 +11 +8 +3 -5 -9200 +15 +13 +11 +6 +2 -6 -8250 +17 +16 +11 +6 +2 -8 -8315 +15 +15 +12 -6 +1 -8 -8400 +18 +16 +13 -6 +1 -7 -9
Tol +/- 2 2 2 2 2 2 2Correction factor Kok
CIRCULAR CONE DIFFUSER2.42
ACDRA
Page. 49 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
125 160 200 250 315 400 500
40
35
150
30
2000
5
50
2520
4 - 8
3 - 6
2.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
0.75 - 1.5
0.5 - 1
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
125 160 200 250 315 400
40
35
150
30
5
5025
209 - 15
8 - 13.5
7 - 12
50020
6 - 10
4 - 7
3.5 - 6
3 - 5
2.5 - 4
200
5 - 8
10 - 16.5
500
ARA Horizontal blow (dimension G)
ARA Vertical blow (dimension H)
ROUND CEILING DIFFUSER2.43
ARCD
Page. 50
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 10o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
150
304
250
200Inlet Diameter
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X (X is the nominal neck diameter of the diffuser).
Example: If your requirement is for a 200 mm diameter ceiling diffuser, the ordering code would beARCD200 {When ordering it is not necessary to include the periods [..]).
Product Size Numbers
"Type" "X" Size ColourARCD 150 Powder coat white
200250300
Special colours
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description2.43 ARCD ARCD150 3215250 ALUM RND CEILING DIFFUSER 150MM
ARCD200 3214034 ALUM RND CEILING DIFFUSER 200MMARCD250 3214035 ALUM RND CEILING DIFFUSER 250MMARCD300 3214038 ALUM RND CEILING DIFFUSER 300MM
Metalflex Coded Products
ROUND CEILING DIFFUSER2.43
ARCD
Page. 51 Bradflo reserves the right to make changes to product without prior notice
DescriptionThe 2.43 (ARCD) Round ceiling diffuser is fabricat-ed from spun aluminium. The diffuser has a roundspigot to suit flexible duct. The core is adjustableand acts as both balancing damper and pattern con-trol.The diffuser may be easily fixed into position usingspecial fixing clips provided.
FinishStandard finish is white electrostatic powdercoat.There are also 15 other colours available to choosefrom at no additional cost.Contact your nearest Bradflo office for any specialrequirement you may have.
Design dimensions
Product Code A B CARCD150 150 310 145ARCD200 200 360 165ARCD250 250 410 175ARCD300 300 460 190
ROUND CEILING DIFFUSER2.43
ARCD
Page. 52Bradflo reserves the right to make changes to product without prior notice
InletDiametermm (in)
Discharge Gapmm(in)
AirflowI/s (cfm)
StatisticPressurepa ( InH2O)
Throwm (ft) 63 125 250 500 1000 2000 4000 8000
150 40 (1.6) 40 (85) 5.5 (.022) .92 (3.0) 45.0 46.0 45.0 45.0 42.0 34.5 26.5 28.5(5.9) 32 (1.25) 7.5 (.030) 1.40 (4.6) 45.0 45.5 43.5 45.0 44.0 35.5 21.5 29.5
25 (1.0) 23 (0.90) 1.70 (5.60) 43.5 51.5 48.5 45.0 42.0 36.5 30.0 2.340 (1.6) 75 (158) 6.5 (0.26) 1.35 (4.4) 44.5 46.5 44.5 45.0 43.5 33.5 26.5 28.532 (1.25) 8.5 (0.34) 1.70 (5.6) 46.0 52.0 50.0 50.5 51.0 43.5 34.5 23.525 (1.0) 44 (.173) 2.03 (6.7) 47.0 54.0 50.5 50.0 50.5 39.5 31.5 29.540 (1.6) 100 (212) 7 (.028) 1.80 (5.9) 45.0 49.5 47.5 49.0 49.0 41.0 25.5 28.532 (1.25) 13 (.051) 2.50 (8.2) 47.0 52.0 49.0 51.0 51.5 44.5 34.5 23.525 (1.0) 63 (.248) 3.00 (9.8) 48.0 54.0 52.5 50.5 52.5 46.0 36.5 29.040 (1.6) 150 (318) 13 (.051) 2.15 (7.1) 29.5 55.5 54.0 56.5 58.0 52.5 44.5 33.532 (1.25)25 (1.0)40 (1.6) 200 (424) 21 (.083) 2.95 (9.7) 57.5 66.0 63.0 64.0 66.0 62.0 55.0 50.532 (1.25) 30 (.118) 3.4 (11.2) 56.0 64.0 63.0 61.5 64.5 60.5 52.5 49.025 (1.0) 120 (.472) 3.8 (12.5) 51.5 63.0 63.5 61.0 60.5 58.5 51.5 44.5
200 40 (1.6) 75 (158) 16 (.063) .95 (3.1) 42.0 45.0 40.5 35.5 31.5 22.5 17.5 22.0(7.9) 32 (1.25) 30 (.118) 1.5 (4.9) 42.0 45.0 42.5 36.0 32.0 24.5 17.5 23.0
25 (1.0) 75 (.295) 1.8 (5.9) 42.5 57.0 47.0 43.5 38.0 34.0 25.0 23.040 (1.6) 100 (212) 18 (.071) 1.75 (5.7) 41.5 44.5 41.0 36.0 32.0 23.0 17.5 22.532 (1.25) 55 (.217) 1.85 (6.1) 41.5 48.5 46.5 41.5 37.5 33.5 21.5 23.025 (1.0) 103 (.406) 2.0 (6.6) 42.0 49.5 49.5 47.5 43.0 40.0 33.5 22.540 (1.6) 150 (318) 35 (.138) 2.1 (6.9) 45.0 51.5 48.5 44.0 41.0 36.5 22.5 22.532 (1.25) 96 (.378) 2.2 (7.2) 44.0 54.0 53.5 49.0 45.5 41.5 21.5 37.025 (1.0) 170 (.669) 2.6 (8.5) 44.0 54.5 56.0 56.0 52.0 49.0 44.0 37.040 (1.6) 200 (424) 57 (.224) 2.4 (7.9) 48.0 58.0 55.0 50.5 48.0 45.0 34.5 29.032 (1.25) 180 (.709) 2.65 (8.7) 48.0 60.0 60.5 57.0 53.0 51.0 42.5 37.025 (1.0) 265 (1.04) 3.0 (9.8) 47.5 59.0 60.5 62.5 59.5 55.0 51.5 47.040 (1.6) 250 (530) 95 (.374) 3.1 (10.2) 51.0 64.0 61.5 57.0 55.5 53.0 45.5 35.532 (1.25) 260 (1.02) 3.35 (11) 51.5 65.0 65.5 63.0 59.5 57.0 51.5 45.040 (1.6) 300 (636) 220 (.866) 3.75 (12.3) 55.5 67.5.665.0 60.0 58.5 55.5 48.5 37.532 (1.25) 500 (1.97) 3.9 (12.8) 53.0 64.5 65.0 69.5 65.5 64.0 59.0 55.5
250 40 (1.6) 100 (212) 12 (.047) 1.05 (3.4) 42.5 41.5 35.5 31.0 26.0 11.5 16.5 28.0(9.8) 32 (1.25) 15 (.059) 1.35 (4.4) 42.5 41.5 37.0 32.0 26.5 15.5 17.5 27.5
25 (1.0) 40 (.157) 2.2 (7.2) 42.0 44.0 43.5 39.5 36.5 30.0 24.5 22.040 (1.6) 150 (138) 18 (.071) 1.65 (5.4) 43.0 41.5 38.5 34.0 29.5 16.0 17.5 27.532 (1.25) 20 (.079) 1.85 (6.1) 44.0 45.0 40.5 34.5 32.0 29.5 17.5 28.525 (1.0) 73 (.287) 2.8 (9.2) 44.0 50.5 48.0 43.5 41.5 38.5 28.0 21.540 (1.6) 200 (424) 27 (.106) 1.8 (5.9) 45.0 47.5 43.0 39.5 36.0 25.5 17.5 27.532 (1.25) 50 (.197) 2.35 (7.7) 45.0 50.5 46.0 41.5 39.0 32.5 17.5 28.525 (1.0) 110 (.433) 3.40 (11.2) 43.5 54.5 52.5 48.5 47.0 44.5 36.5 28.540 (1.6) 250 (350) 42 (.165) 2.85 (9.3) 48.0 53.5 49.5 44.5 42.5 36.5 17.5 27.532 (1.25) 65 (.256) 3.0 (9.8) 46.0 53.5 51.5 47.0 44.5 39.0 17.5 36.025 (1.0) 165 (.650) 3.8 (12.5) 47.0 57.0 59.5 55.0 52.5 50.5 45.5 35.540 (1.6) 300 (636) 60 (.236) 3.05 (10.0) 51.5 59.0 53.5 49.0 47.0 42.5 32.0 27.5
Sound Power LevelOctave band centre frequency (Hz)
PERFORMANCE DATANote! Throw data is at a terminal velocity of 0.5m/s. Air supply is isothermal
JET DIFFUSER2.51
AJD
Page. 53
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
200
375
300
250Inlet Diameter
Product Size NumbersDiffusers mounted on plate "N"
"Type" "X" Size 1 2 3 4 ColourAJD 200 Powder coat white
250300375
Special colours
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..N (X is the nominal neck diameter of the diffuser).
Example: If your requirement is for three 250 mm diameter Jet diffusers mounted on a plate, the orderingcode would be AJD2503. {When ordering it is not necessary to include the periods [..]).
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description2.51 AJD AJD250 3214811 ADJUSTABLE JET DIFFUSER 250 JD
AJD300 3214826 ADJUSTABLE JET DIFFUSER 300 JDAJD375 3214847 ADJUSTABLE JET DIFFUSER 375 JD
Metalflex Coded Products
JET DIFFUSER2.51
AJD
Page. 54 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.51 (AJD) diffusers are designed for air condi-tioning or ventilating large areas such as sports cen-tres, theatres, entertainment and industrial areas.
The diffusers are able to operate at a high airthroughput.
By rotating the nozzle through 360 deg., the air pat-tern may be adjusted from a jet pattern to a diffusedpattern.
Finish
The diffuser core is manufactured from spun allu-minium and the outer case is steel. The entireassembly is powder coated in a range of standardcolours.
Contact your nearest Bradflo Office with yourrequirement.
No. of Jets1 2 3 4
X-Size Dia. H L W W W W200 280 225 280 520 760 1000250 330 265 330 620 910 1200300 380 300 380 720 1060 1400375 455 300 455 870 1285 1700
1 to 4 Jet Diffusers mounted.
Design dimensions
JET DIFFUSER2.51
AJD
Page. 55Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
200 250 300 375
40
35
250
30
2000
5
50
25
20
25 - 5020 - 40
18 - 36
50020
16 - 3214 - 28
4 - 8
12 - 2410 - 20
8 - 16
6 - 12
200
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
200 250 300 375
40
35
250
30
2000
5
50
25
20
12 - 2410 - 20
9 - 18
50020
8 - 167 - 14
2 - 4
16 - 125 - 10
4 - 8
3 - 6
200
AJD Jet pattern
AJD Diffused pattern
JET DIFFUSER2.52
AJA
Page. 56
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 15o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
200
400
315
250Diameter
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..N (X is the nominal neck diameter of the diffuser).
Example: If your requirement is for three 250 mm diameter Jet diffusers mounted on a plate, the orderingcode would be AJA2503. {When ordering it is not necessary to include the periods [..]).
Product Size NumbersDiffusers mounted on plate "N"
"Type" "X" Size 1 2 3 4 ColourAJA 200 Powder coat whiteAJAX 250
315400500
Special colours
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description2.52 AJA AJA500 3215042 ADJUSTABLE JET DIFFUSER 500 JA
Metalflex Coded Products
JET DIFFUSER2.52
AJA
Page. 57 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.52 (AJA) diffusers are designed for air condi-tioning or ventilating large areas such as sports cen-tres, theatres, entertainment and industrial areas.
The diffusers are able to operate at a high airthroughput.
By rotating the nozzle through 360 deg., the air pat-tern may be adjusted from a jet pattern to a diffusedpattern.
Finish
The diffuser core and the outer case are made ofsteel. The entire assembly is powder coated in arange of standard colours.
Contact your nearest Bradflo Office with yourrequirement.
Design dimensions
No. of Jets1 2 3 4
X-Size Dia. A B C H W W W W200 46 142 132 280 280 520 760 1000250 58 177 167 330 330 620 910 1200315 71 227 217 395 395 750 1105 1460400 91 282 272 480 480 970 1320 1800500 116 320 310 580 580 1120 1620 2200
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
Lb = distance from air device to the plane where themaximum spread occurs.
Od = the jet diameter at Lb
JET DIFFUSER2.52
AJA
Page. 58Bradflo reserves the right to make changes to product without prior notice
Od
Lb
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000200 +4 -1 -2 +1 -5 -12 -9250 0 -1 +2 -1 -10 -15 -5315 +2 0 +1 -1 -8 -13 -11400 +3 +1 +3 -1 -7 -9 -10500 +3 0 +2 0 -7 -8 -11
Tol +/- 2 2 2 2 2 2 2
Kok with diffused pattern
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000200 +3 -2 -3 +1 -5 -10 -7250 +1 -4 -3 +2 -11 -13 -14315 +2 -1 +1 0 -9 -19 -14400 +2 +1 +4 -3 -8 -11 -10500 +2 +1 +5 0 -10 -12 -11
Tol +/- 2 2 2 2 2 2 2
Kok with jet pattern
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000200 13 10 4 0 0 0 0250 11 7 3 0 0 0 0315 10 6 2 0 0 0 0400 9 5 1 0 0 0 0500 7 3 0 0 0 0 0
Tol +/- 2 2 2 2 2 2 2
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
Od 200 = L0.3 x 0.13 Od 200 = L0.3 x 0.46
Od 250 = L0.3 x 0.08 Od 250 = L0.3 x 0.48
Od 315 = L0.3 x 0.11 Od 315 = L0.3 x 0.42
Od 400 = L0.3 x 0.13 Od 400 = L0.3 x 0.38
Od 500 = L0.3 x 0.13 Od 500 = L0.3 x 0.38
Lb 200 = L0.3 x 0.27 Lb 200 = L0.3 x 0.54
Lb 250 = L0.3 x 0.33 Lb 250 = L0.3 x 0.63
Lb 315 = L0.3 x 0.34 Lb 315 = L0.3 x 0.57
Lb 400 = L0.3 x 0.45 Lb 400 = L0.3 x 0.45
Lb 500 = L0.3 x 0.45 Lb 500 = L0.3 x 0.45
Jet Pattern Diffused Pattern
Page. 59 Bradflo reserves the right to make changes to product without prior notice
JET DIFFUSER2.52
AJA
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
200 250 315 400 500
40
35
250
30
2000
5
50
2520
12 - 24
10 - 209 - 18
50020
8 - 167 - 14
3.5 - 7
6 - 12
5 - 104.5 - 9
4 - 8
14 - 2818 - 36
200
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
200 250 315 400
4035
250
30
2000
5
5025
20
12 - 2410 - 20
9 - 18
50020
8 - 167 - 14
3 - 6
6 - 125 - 10
4 - 8
200
AJA Jet pattern
AJA Diffused pattern
Page. 60Bradflo reserves the right to make changes to product without prior notice
JET DIFFUSER2.52
AJA
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
200 250 315 400 500
4035
250
30
2000
5
50
25
2012 - 24
10 - 209 - 18
50020
8 - 167 - 14
6 - 12
5 - 104 - 8
14 - 28
18 - 36
200
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
200 250 315 400 500
4035
250
30
2000
5
50
2520
10 - 20
50020
8 - 16
7 - 14
3.5 - 7
6 - 12
5 - 10
3 - 6
4 - 8
2.5 - 5
200
AJAX Jet pattern
AJAX Diffused pattern
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
JET DIFFUSER2.53
AJS
Page. 61
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 15o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
200
400
315
250Diameter
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..N (X is the nominal neck diameter of the diffuser).
Example: If your requirement is for three 250 mm diameter Jet diffusers mounted on a plate, the orderingcode would be AJS2503. {When ordering it is not necessary to include the periods [..]).
Product Size NumbersDiffusers mounted on plate "N"
"Type" "X" Size 1 2 3 4 ColourAJS 200 Powder coat whiteAJSX 250
315400500
Special colours
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description2.53 AJS AJS250 3214912 ADJUSTABLE JET DIFFUSER 250 JS
Metalflex Coded Products
JET DIFFUSER2.53
AJS
Page. 62 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.53 (AJS) diffusers are designed for air condi-tioning or ventilating large areas such as sports cen-tres, theatres, entertainment and industrial areas.
The diffusers are able to operate at a high airthroughput.
By rotating the nozzle through 360 deg., the air pat-tern may be adjusted from a jet pattern to a diffusedpattern.
Finish
The diffuser core and the outer case are made ofsteel. The entire assembly is powder coated in arange of standard colours.
Contact your nearest Bradflo Office with yourrequirement.
Design dimensions
No. of Jets1 2 3 4
X-Size Dia. A B C H W W W W200 71 142 132 280 280 520 760 1000250 89 177 167 330 330 620 910 1200315 111 227 217 395 395 750 1105 1460400 150 282 272 480 480 970 1320 1800500 170 320 310 580 580 1120 1620 2200
JET DIFFUSER2.53
AJS
Page. 63Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
200 250 315 400 500
4035
250
30
5000
5
5025
20
2 - 4
2000
20
3.5 - 7
5 - 10
3 - 6
4 - 8
2.5 - 5
500200
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
200 250 315 400 500
4035
250
30
2000
5
50
25
20
15 - 30
50020
8 - 167 - 14
10 - 20
6 - 125 - 10
12 - 24
20 - 40
9 - 18
200
AJS Diffused pattern
AJS Jet pattern
2.55 Bradflo FLANGED JET DIFFUSER DJD
The Bradflo DJD jet nozzle allows high volumes of air to be delivered over long distances. The
centre of the DJD can be rotated to allow for accurate air distribution and can be used for either jet
or diffuse applications.
The diffuser is constructed using spun aluminium segments, creating a lightweight and corrosion
resistant jet diffuser.
Standard finish is powder coated white with other colours available on request.
Product Specifications
PART CODE SIZE DIMENSION "A" DIMENSION "B" DIMENSION "H"
DJD200P 200 272 199 164
DJD250P 250 322 249 164
DJD300P 300 372 299 181
DJD350P 350 422 349 217
DJD400P 400 472 399 210
Performance Data
PRODUCT PERFORMANCE MEASURE NECK VELOCITY (m/sec)
CODE DATA 2 3 4 5 6 7
DJD200P
AIR FLOW l/sec 63 94 126 157 188 220
NOISE NC <15 16 23 31 38 44
PRESSURE DROP Pa 3 8 13 21 30 41
THROW Metres 4.2 4.9 5.6 6.3 7.1 8
DJD250P
AIR FLOW l/sec 98 147 196 245 295 344
NOISE NC <15 17 25 33 40 45
PRESSURE DROP Pa 3 7 13 20 29 40
THROW Metres 4.9 5.6 6.4 6.9 7.6 8.7
DJD300P
AIR FLOW l/sec 141 212 283 354 424 495
NOISE NC <15 18 27 35 42 48
PRESSURE DROP Pa 3 7 13 20 28 39
THROW Metres 5.8 6.4 6.9 7.4 8.1 9.2
DJD350P
AIR FLOW l/sec 192 289 385 481 577 673
NOISE NC 17 20 29 36 43 49
PRESSURE DROP Pa 3 7 12 19 28 38
THROW Metres 6.0 6.6 7.2 7.6 8.3 9.4
DJD400P
AIR FLOW l/sec 251 377 503 629 754 880
NOISE NC 19 22 31 39 46 54
PRESSURE DROP Pa 3 7 12 19 28 38
THROW Metres 6.3 6.8 7.5 7.9 8.7 9.8
NOTE: Throws are based on sidewall mounted – 2.00m from floor in the diffuse position
The distances indicated are at a terminal velocity - 0.25 m/sec.
For throws with the DJD centre in the jet application, multiply the above diffuse distances x 2.
PERFORATED DIFFUSER2.61
APD
Page. 64
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 5o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
300 x 300 - 150
600 x 600 - 300
600 x 600 - 250
400 x 400 - 200Square - Inlet Diameter
Product Size Numbers
"Type" "X" SizeInlet dia. "C"
Colour06(150)
08(200)
10(250)
12(300)
APD 12 (300) Powder coat white16 (400)
24 (600)
Special colours
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..C (X is the nominal face size of the diffuser).
Example: If your requirement is for a 400 mm square perforated diffuser with a 200 mm dia inlet, the order-ing code would be APD1608. {When ordering it is not necessary to include the periods [..]).
PERFORATED DIFFUSER2.61
APD
Page. 65 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.61 (APD) perforated diffuser is designed forflush mounting and suspended ceilings.
The diffuser is available in 1,2,3 or 4-way blow con-figurations.
The perforated face may be removed from theframe for installation and cleaning.
The frames are made from aluminium with a perfo-rated, galvanised core.
Finish
Each diffuser is powdercoated white unless other-wise specified.
There are 15 standard colours to choose from.
Design dimensions
Size X Size Inlet dia.A 300 x 300 - 125 300 150B 400 x 400 - 200 400 200C 600 x 600 - 250 600 250D 600 x 600 - 300 600 300
PERFORATED DIFFUSER2.61
APD
Page. 66Bradflo reserves the right to make changes to product without prior notice
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
bh= L0.3 x 0.03
Lbh = L0.3 x 0.65
bv = L0.3 x 0.06
Lbv = L0.3 x 0.65
b hb v
Lbh
Lbv
Lbh
b h
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
A +3 +2 +5 +8 +4 -6 -13B +2 +1 +5 +8 +3 -10 -15C +2 0 +5 +9 0 -12 -15D +2 0 +5 +9 +1 -13 -15
Tol +/- 2 2 2 2 2 2 2
Kok with diffused pattern
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
A 13 8 4 3 1 1 0B 11 6 3 2 1 0 0C 10 5 2 1 1 0 0D 8 4 1 1 0 0 0
Tol +/- 2 2 2 2 2 2 2
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
PERFORATED DIFFUSER2.61
APD
Page. 67 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100Static Pressure (Pa)
50
A B C D
40
35
30
5
50
25
203 - 6
50020
1.5 - 3
2 - 4
1 - 2
2.5 - 5
200
APR 4-way pattern
PERFORATED EXHAUSTGRILLE
2.62APDE
Page. 68
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 20 25 30 35400 x 400
Square
600 x 600
300 x 300
Product Size Numbers
"Type" "X" Size Colour
APDE 12 (300) Powder coat white16 (400)24 (600)
Special colours
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X (X is the nominal face size of the diffuser).
Example: If your requirement is for a 400 mm square perforated return air grille, the ordering code wouldbe APDE16. {When ordering it is not necessary to include the periods [..]).
PERFORATED EXHAUSTGRILLE
2.62APDE
Page. 69 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.62 (APDE) perforated grille is designed forflush mounting and suspended ceilings.
The perforated face is fixed in the frame.
The frames are made from aluminium with a perfo-rated, galvanised core.
Finish
Each diffuser is powdercoated white unless other-wise specified.
There are 15 standard colours to choose from.
Design dimensions
These graphs are for selection only and should not be used for commissioning.
Size X Size Y Size300 x 300 300 244400 x 400 400 344600 x 600 600 544
10 100 1000
Flow Rate (l/s)
1
10
100Static Pressure (Pa)
50
300X300 400X400 600X600
40
35
30
5
50
2520
200020 500200
APDE performance graph
PERFORATED CIRCULARDIFFUSER
2.63APR
Page. 70
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 8o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
125Inlet Diameter
300
250
200
150
Product Size Numbers
"Type" "X" SizeInlet dia. "C"
Colour05(125)
06(150)
08(200)
10(250)
12(300)
APR 10 (250) Powder coat white16 (400)
24 (630)
Special colours
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..C (X is the nominal face diameter of the diffuser).
Example: If your requirement is for a 400 mm dia perforated circular diffuser, the ordering code would beAPR1608. {When ordering it is not necessary to include the periods [..]).
PERFORATED CIRCULARDIFFUSER
2.63APR
Page. 71 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.63 (APR) is a circular perforated supply airdiffuser for mounting in ceilings where exactingrequirements for draught free conditions are neces-sary, such as in schools, offices and hotels.
The air is supplied partly through the perforatedside. This type of construction gives the device ahigh degree of induction and makes the 2.63 modelsuitable for systems with variable air flow, or forinstallations where air has to be supplied with alarge negative temperature and short throw.
The design provides a fully radial pattern and min-imises the occurrence of dust accumulating on theceiling.
The 2.63 model can be ceiling mounted or directlymounted into exposed ductwork.
Finish
Each diffuser is powdercoated white unless other-wise specified.
There are 15 standard colours to choose from.
Design dimensions
φ X Size φ Inlet C φ L250 125 45 145400 150 54 180400 200 54 220630 250 76 270630 300 76 320
PERFORATED CIRCULARDIFFUSER
2.63APR
Page. 72Bradflo reserves the right to make changes to product without prior notice
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Air pattern
(with isothermal air supply)
bv = L0.3 x 0.06
Lbv = L0.3 x 0.65
b v
Lbv
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
Correction factor Kok
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000125 +8 +7 +8 +7 +3 -8 -10160 +8 +7 +8 +8 +1 -9 -12200 +8 +5 +7 +8 +1 -12 -14250 +7 +7 +6 +7 +4 -9 -12300 +7 +5 +7 +8 0 -14 -12
Tol +/- 2 2 2 2 2 2 2
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000125 14 9 5 3 2 1 0160 13 8 4 3 1 1 0200 11 6 3 2 1 0 0250 10 5 2 1 1 0 0300 8 4 1 1 0 0 0
Tol +/- 2 2 2 2 2 2 2
PERFORATED CIRCULARDIFFUSER
2.63APR
Page. 73 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
125 150 200 250 300
40
3530
5
50
2520 1.5 - 3
50020
0.75 - 1.5
1 - 2
2 - 4
150
200
APR performance graph
ENVIRONMENT 2000EXHAUST AIR GRILLE
2.64APME
Page. 74
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 20 25 30 35400
Square
600
300
Product Size Numbers
"Type" "X" Size Colour
APME 10 (250) Powder coat white16 (400)24 (630)
Special colours
Ordering ProcedureUsing the chart below select your requirement and substitute the underscored text below.Type..X (X is the nominal face size of the diffuser).
Example: If your requirement is for a 400 mm square exhaust air device, the ordering code would beAPME16. (When ordering it is not necessary to include the periods [..]).
ENVIRONMENT 2000EXHAUST AIR GRILLE
2.64APME
Page. 75 Bradflo reserves the right to make changes to product without prior notice
Description
The Environment 2000 range is an exclusive seriesof air distribution devices with diffuser componentsthat will fit any ceiling.
The 2.64 (APME) exhaust air grille matches inappearance the 2.65 and 2.66 diffusers.
After installation there are no visible mounting hard-ware or fixing components visible.
Finish
Standard finish is powdercoat white unless other-wise specified.
There are 15 other standard colours to choose from.
Size X Y300 x300 300 250400 x 400 400 350600 x 600 600 550
ENVIRONMENT 2000EXHAUST AIR GRILLE
2.64APME
Page. 76Bradflo reserves the right to make changes to product without prior notice
0 mm, 7mm & 14 mmAdjustable gap
Perforated centre core can be adjusted to anyone of three positions from face side of grille.
Plaster ceiling Exposed T-Bar Concealed T-Bar
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculatedby adding the correction factor Kok (see table below)to the sound level NR dB according to the formula:
Lw = NR + Kok
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000300 +13 +11 +10 +8 +5 -1 -11400 +15 +12 +11 +8 0 -2 -3600 +19 +14 +12 +7 +5 -5 -10
Tol +/- 2 2 2 2 2 2 2
Applications
ENVIRONMENT 2000EXHAUST AIR GRILLE
2.64APME
Page. 77 Bradflo reserves the right to make changes to product without prior notice
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100Static Pressure (Pa)
50
300X300 400X400 600X600
40
35
30
5
50
25
20
200020 500200
APME Exhaust air
ENVIRONMENT 2000DIFFUSER
2.65APMF
Page. 78
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
600 X 600 - 250
Square - Inlet Diameter
600 X 600 - 300
600 X 600 - 200400 X 400 - 200
400 X 400 - 150300 X 300 - 150
Product Size Numbers
"Type" "X" SizeInlet dia. "C" Blow pattern "B"
Colour06(150)
08(200)
10(250)
12(300)
1Way
2Way
3Way
4Way
CornerBlow
APMF 12 (300) C Powder coat white16 (400) C
24 (600) C
Special colours
Note! Shaded areas indicate standard product.
Ordering procedureUsing the chart below, select your requirements and substitute the underscored text below. APMF..X..C..B
Example: If your requirement is for a 400mm square diffuser with an inlet dia. of 200mm, 2-way cornerblow, the ordering code would be: APMF1608C. When ordering it is not necessary to include the periods(..)).
ENVIRONMENT 2000DIFFUSER
2.65APMF
Page. 79 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.65 (APMF) diffuser has been designed for airconditioning systems where a draught free, quietand pleasant atmosphere is required. They areespecially suited for variable air volume systems.
Through slots around the perimeter of the diffuser aprimary air stream is projected along the ceiling.The volume of air out of these slots may be con-trolled by using the 3 position adjustment availableat the face of the diffuser.
The diffuser is manufactured to match the 2.64 and2.66 models in appearance.
The air pattern is fully radial and may also be sup-plied in either 1, 2 or 3-way patterns.
Finish
The standard finish is white unless otherwise speci-fied.
There are 15 other standard colours available.
Size X B C φDA 300 - 150 300 255 100 150B 400 - 150 400 355 100 150C 400 - 200 400 355 100 200D 600 - 200 600 555 100 200E 600 - 250 600 555 100 250F 600 - 300 600 555 100 300
ENVIRONMENT 2000DIFFUSER
2.65APMF
Page. 80Bradflo reserves the right to make changes to product without prior notice
0 mm, 7mm & 14 mmAdjustable gap
Perforated centre core can be adjusted to anyone of three positions from face side of grille.
Plaster ceiling Exposed T-Bar Concealed T-Bar
Applications
2-way pattern
3-way pattern2-way corner pattern
b hb v
Lbh
Lbv
Refer to next page for formulas to determinethe isothermal air pattern.
ENVIRONMENT 2000DIFFUSER
2.65APMF
Page. 81 Bradflo reserves the right to make changes to product without prior notice
Adjustable throw
The throw may be adjusted according to the follow-ing table by raising or lowering the diffuser fasciapanel.
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
Perimeter Slot Multiply Throw by:0 mm 1.27 mm 1.1
14 mm 1
Factors for different patterns.
4-Way 3-Way 2-Way2-WayCorner 1-Way
bh = L0.3 x - 0.40 1.00 0.50 0.90Lbh = L0.3 x - 0.40 0.50 0.40 0.30bv = L0.3 x 0.05 0.05 0.05 0.05 0.06Lbv = L0.3 x 0.40 0.40 0.40 0.40 0.40
Lbh = distance from diffuser to maximum spread.bv = vertical spreadbh = horizontal spread
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000150 -3 -4 -1 +2 -2 -12 -19200 -4 -5 -1 +2 -3 -16 -21250 -4 -6 -1 +2 -6 -18 -21300 -4 -6 -1 +2 -5 -19 -21
Tol +/- 2 2 2 2 2 2 2
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000150 13 8 4 3 1 1 0200 11 6 3 2 1 0 0250 10 5 2 1 1 0 0300 8 4 1 1 0 0 0
Tol +/- 2 2 2 2 2 2 2
Correction factor Kok
ENVIRONMENT 2000DIFFUSER
2.65APMF
Page. 82Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
A B C D E F
4035
250
30
2000
5
50
25
202.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
3 - 6
200
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
A B C D E F
40
35
250
30
5
50
25
20
3 - 6
50020
2.5 - 5
2 - 4
1.5 - 3
200
APMF 2-way blow
APMF 1-way blow
ENVIRONMENT 2000DIFFUSER
2.65APMF
Page. 83 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
A B C D E F
4035
250
30
2000
5
50
2520
2.5 - 5
50020
2 - 4
1.5 - 3
1 - 2
3 - 6
200
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa) A B C D E F
40
35
250
30
5
50
2520
3 - 6
2.5 - 5
2 - 4
1.5 - 3
50 500 2000
1 - 2
APMF 4-way blow
APMF 3-way blow
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM
2.66APM
Page. 84
Sound Selection Chart
NR dB
MAX Recommended
Selection Guide
Δ T = 12o C 10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
300 x 300 - 150
600 x 600 - 300
600 x 600 - 250
400 x 400 - 200Square - Inlet Diameter
Product Size Numbers
"Type" "X" SizeInlet dia. "C" Blow pattern "B"
Colour06(150)
08(200)
10(250)
12(300)
1 2Way
3Way
4Way
CornerBlow
APM 12 (300) C Powder coat white16 (400) C
24 (600) C
Special colours
Ordering procedureUsing the chart below select your requirement and substitute the underscored text below.Type..X..C..B (X is the nominal face size of the diffuser).
Example: If your requirement is for a 400 mm square multi-function plenum with a 200 mm inlet, cornerblow, the ordering code would be APM1608C (When ordering it is not necessary to include the periods[..]).
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM
2.66APM
Page. 85 Bradflo reserves the right to make changes to product without prior notice
Description
The 2.66 (APM) diffuser has been designed for airconditioning systems where a draught free, quietand pleasant atmosphere is required. They areespecially suited for variable air volume systems.
Through slots around the perimeter of the diffuser aprimary air stream is projected along the ceiling.The volume of air out of these slots may be con-trolled by using the 3 position adjustment availableat the face of the diffuser.
The diffuser is manufactured to match the 2.64 and2.66 models in appearance.
The air pattern is fully radial and may also be sup-plied in either 1, 2 or 3-way patterns.
The pressure reducing plenum chamber contains aregulating damper, sound attenuation and balancingsystem. This system eliminates the need to removeany part of the ceiling or diffuser during air balanc-ing.
Finish
The standard finish is white unless otherwise speci-fied.
There are 15 other standard colours available.
Design dimensions
Size X B C DA 300 - 150 300 300 150 254B 400 - 150 400 300 150 354C 400 - 200 400 350 200 354D 600 - 200 600 350 200 554E 600 - 250 600 400 250 554F 600 - 300 600 450 300 554
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM2.66
APM
Page. 86Bradflo reserves the right to make changes to product without prior notice
0 mm, 7mm & 14 mmAdjustable gap
Perforated centre core can be adjusted to anyone of three positions from face side of grille.
Plaster ceiling Exposed T-Bar Concealed T-Bar
Applications
2-way pattern
3-way pattern2-way corner pattern
b hb v
Lbh
Lbv
Refer to next page for formulas to determinethe isothermal air pattern.
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM2.66
APM
Page. 87 Bradflo reserves the right to make changes to product without prior notice
Adjustable throw
The throw may be adjusted according to the follow-ing table by raising or lowering the diffuser fasciapanel.
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
Perimeter Slot Multiply Throw by:0 mm 1.27 mm 1.1
14 mm 1
Factors for different patterns.
4-Way 3-Way 2-Way2-WayCorner 1-Way
bh = L0.3 x - 0.40 1.00 0.50 0.90Lbh = L0.3 x - 0.40 0.50 0.40 0.30bv = L0.3 x 0.05 0.05 0.05 0.05 0.06Lbv = L0.3 x 0.40 0.40 0.40 0.40 0.40
Lbh = distance from diffuser to maximum spread.bv = vertical spreadbh = horizontal spread
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
300-150Open +16 +13 +7 +8 -3 -10 -18
Closed +4 +12 +9 +5 +3 +2 -3400-150Open +15 +12 +6 +6 +3 -12 -18
Closed +15 +14 +8 +8 +3 +2 -2400-200Open +19 +12 +7 +6 -6 -14 -20
Closed +7 +9 +5 +6 +2 +2 +1600-200Open +14 +8 +3 +8 -2 -9 -18
Closed +22 +10 +7 +7 0 -5 -8600-250Open +20 +12 +7 +4 -5 -12 -16
Closed +22 +10 +7 +5 -3 -8 -8600-300Open +17 +9 +7 +4 -8 -16 -21
Closed +15 +10 +6 +6 +1 0 -5Tol +/- 2 2 2 2 2 2 2
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000
300-150 16 16 13 14 18 20 18400-150 13 15 13 15 18 17 15400-200 13 15 13 15 18 17 15600-200 13 15 13 15 18 17 15600-250 12 15 13 15 18 17 15600-300 8 14 13 15 18 16 15
Tol +/- 2 2 2 2 2 2 2
Correction factor Kok
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM2.66
APM
Page. 88Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
0.5 - 1
1.5 - 3
1 - 2
200
200
20
C
O
4 WAY BLOW
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
0.5 - 1
1.5 - 3
1 - 2
200
200
20
C
O
2 WAY BLOW
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
0.5 - 1
1.5 - 3
1 - 2
200
200
20
C
O
3 WAY BLOW
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
0.5 - 1
1.5 - 3
1 - 2
200
200
20
C
O
1 WAY BLOW
2 - 4
APM 300 x 300 - 150
APM 300 x 300 - 150 APM 300 x 300 - 150
APM 300 x 300 - 150
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM2.66
APM
Page. 89 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)40
20 50
500
50
35
30
20
25
Damper
0.3 - 0.6
1 - 2
200
200
20
C
O
4 WAY BLOW
0.5 - 1
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)40
20 50
500
50
35
30
20
25
Damper
0.3 - 0.6
1 - 2
200
200
20
C
O
2 WAY BLOW
0.5 - 1
1.5 - 3
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)40
20 50
500
50
35
30
20
25
Damper
0.3 - 0.6
1 - 2
200
200
20
C
O
3 WAY BLOW
0.5 - 1
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
1 - 2
200
200
20
C
O
1 WAY BLOW
0.5 - 1
APM 400 x 400 - 150
APM 400 x 400 - 150 APM 400 x 400 - 150
APM 400 x 400 - 150
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM2.66
APM
Page. 90Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa) 40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
1 - 2
300
200
20
C
O
4 WAY BLOW
0.5 - 1
200
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa) 40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
2 - 4
300
200
20
C
O
2 WAY BLOW
0.5 - 1
200
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa) 40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
1 - 2
300
200
20
C
O
3 WAY BLOW
0.5 - 1
200
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa) 40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
1 - 2
300
200
20
C
O
1 WAY BLOW
2 - 4
200
2.5 - 5
APM 400 x 400 - 200
APM 400 x 400 - 200 APM 400 x 400 - 200
APM 400 x 400 - 200
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM2.66
APM
Page. 91 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
1 - 2
500
200
20
CO
4 WAY BLOW
2 - 4
200
0.5 - 1
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
1 - 2
500
200
20
CO
2 WAY BLOW
2 - 4
200
2.5 - 5
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
1 - 2
500
200
20
CO
3 WAY BLOW
2 - 4
200
0.5 - 1
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
3 - 6
500
200
20
CO
1 WAY BLOW
2 - 4
200
2.5 - 5
APM 600 x 600 - 200
APM 600 x 600 - 200 APM 600 x 600 - 200
APM 600 x 600 - 200
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM2.66
APM
Page. 92Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Other terminal velocities maybe calculated using formulas in Section 4.2 ofthe Air Handling Reference Guide.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
500
200
20
C
O
4 WAY BLOW
2 - 4
200
1 - 2
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
500
200
20
C
O
2 WAY BLOW
2 - 4
200
2.5 - 5
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
500
200
20
C
O
3 WAY BLOW
2 - 4
200
1 - 2
2.5 - 5
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
1.5 - 3
500
200
20
C
O
1 WAY BLOW
2 - 4
200
2.5 - 5
3 - 6
APM 600 x 600 - 250
APM 600 x 600 - 250 APM 600 x 600 - 250
APM 600 x 600 - 250
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM2.66
APM
Page. 93 Bradflo reserves the right to make changes to product without prior notice
Engineering Graphs
Throws shown are to a terminal velocity of 0.60m/s and 0.30 m/s. Other terminal velocities maybe calculated using formulas in Section 4.2 ofthe Air Handling Reference Guide.
Terminal velocity
0.30 m/s0.15 m/s
Approximate airvelocity in room
0.60 m/s0.30 m/s
These graphs are for selection only and should not be used for commissioning.
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
500
200
20
C
O
4 WAY BLOW
2 - 4
200
1.5 - 3
1 - 2
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
500
200
20
C
O
2 WAY BLOW
2 - 4
200
1.5 - 3
1 - 2
2.5 - 5
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
500
200
20
C
O
3 WAY BLOW
2 - 4
200
1.5 - 3
1 - 2
10 100
Flow Rate (l/s)
10
100
Static Pressure (Pa)
40
20 50
500
50
35
30
20
25
Damper
500
200
20
C
O
1 WAY BLOW
2 - 4
200
1.5 - 3
3 - 6
2.5 - 5
APM 600 x 600 - 300
APM 600 x 600 - 300 APM 600 x 600 - 300
APM 600 x 600 - 300
ENVIRONMENT 2000DIFFUSER WITH MULTI-
FUNCTION PLENUM2.66
APM
Page. 94Bradflo reserves the right to make changes to product without prior notice
These graphs are for selection only and should not be used for commissioning.
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
150 200 250 300150
2000
5
50
50020 200
BALANCING GRAPH
Bradflo reserves the right to make changes to product without prior notice Page 95
HIGH VOLUME SWIRL DIFFUSERS
Description The High Volume Swirl Diffuser provides a uniform radial pattern of air across the ceiling to provide a good temperature distribution with minimal draughts in the occupied zones. The design ensures comfort can be maintained across a broad range of flow rates.
It is designed to be either flush ceiling mounted in a grid section or plasterboard mounted. The plenum is fitted with an internal diffuser plate to improve the pressure distribution. The diffuser is secured by a single centre screw and hidden from view behind a push-on decorative cap.
For lower flow rates, restriction rings (#1 to 5) are available for the PHVSD595-500 and aesthetically hides inside the neck behind diffuser face.
Square or round face swirl diffusers are available with size details on the next page.
The standard finish is a white (RAL9016) powder-coat but other colours are available..
Selection Guide
2.70 PHVSD
SECTION B – DIFFUSERS
Bradflo reserves the right to make changes to product without prior notice Page 96
HIGH VOLUME SWIRL DIFFUSERS
SECTION B - DIFFUSERS
Ordering Procedure The available sizes are detailed below.
Model Dimension "A" Diameter "B"
PHVSD595-500 595 500 PHVSD675R-500 675 500 PHVSD595-350 595 350 PHVSD595R-350 595 350 PHVSD600R-500 600 500 PHVSD445-350 445 350 PHVSD395-350 395 350 PHVSD470R-350 470 350 PHVSD370-250 370 250 PHVSD296-250 296 250 Rear View PHVSD595-350
Letter “R” denotes a round diffuser. There are five sizes of ring insert available to downsize PHVSD595-500 for lower flow outlets. Rings are identified using a suffix e.g. “/ 5” for the smallest aperture ring.
Dimensions
Application
This type of diffuser utilises the coanda effect to efficiently traverse the ceiling and envelope the occupied space with a supply of conditioned air. It is important to separate the units adequately to avoid undesirable collision velocities.
2.70PHVSD
Bradflo reserves the right to make changes to product without prior notice Page 97
Performance Graphs
These graphs are for selection only and should not be used for commissioning.
2.70 PHVSD
SECTION B - DIFFUSERS
HIGH VOLUME SWIRL DIFFUSERS
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description2.70 PHVSD PHVSD30SW 3215244 BRADFLO SWIRL DIFF-296 SQUARE RAL9003
PHVSD395-350 3209581PHVSD450-350 3209781PHVSD595 3209585PHVSD595-350 3209960
3209962PHVSD595R
Metalflex Coded Products
BRADFLO SWIRL DIFF-395 SQAUE 350 NECKBRADFLO SWIRL DIFF-450 SQUARE 350 NECKBRADFLO SWIRL DIFF-595 SQUARE 496 NECKBRADFLO SWIRL DIFF-595 SQUARE 350 NECKBRADFLO SWIRL DIFF-675 ROUND 496 NECK
Page 98
5FLEX
IBLE D
UC
TING
4FITTIN
GS &
AC
CESSO
RIES
Dam
pers, Equalisers & M
easures2
DIFFU
SERS
1G
RILLES &
LOU
VR
ES3
PLENU
MS
PLENUMSChapter Description Product Code
Plenum box ADC
Insulated plenum box ADCI
Plenum box with measurer ADE
Linear plenum box ASA
Linear plenum box with measurer ASE3.33
3.31
3.13
3.12
3.11
HOMEHOME
PLENUM BOX3.11
ADC
Page. 1
DescriptionThe 3.11 plenum box is for use with grilles and diffusers. The plenum is manufactured from galvanisedsteel.
Ordering procedureUsing the chart below, select your requirement and substitute the underscored text ADC..X..Y..D
Example:If your requirement is for a 375 mm square plenum with a 200 mm dia. inlet, the ordering codewould be: ADC151508
Other sizes are available upon request. Please contact your nearest Bradflo office.
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
09(225)
10(250)
12(300)
15(375)
16(400)
18(450)
24(600)
Inlet Dia."D"
ADC 06 (150) 06 (150)
08 (200) 08 (200)
09 (225) 10 (250)
10 (250) 12 (300)
12 (300)15 (375)
16 (400)
18 (450)
Special sizes 24 (600)
PLENUM BOX3.11
ADC
Page. 2 Bradflo reserves the right to make changes to product without prior notice
Design dimensions
Inlet larger than the outlet
Inlet smaller than the outlet
INSULATED PLENUM BOX3.12
ADCI
Page. 3
DescriptionThe 3.12 insulated plenum box is for use with grilles and diffusers. The plenum is manufactured from gal-vanised steel and internally insulated with black faced glasswool. Other types of insulation is available uponrequest including external polyurethane foam.
Ordering procedureUsing the chart below, select your requirement and substitute the underscored text ADCI..X..Y..D
Example:If your requirement is for a 375 mm square plenum with a 200 mm dia. inlet, the ordering codewould be: ADCI151508
Other sizes are available upon request. Please contact your nearest Bradflo office.
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
09(225)
10(250)
12(300)
15(375)
16(400)
18(450)
24(600)
Inlet Dia."D"
ADCI 06 (150) 06 (150)
08 (200) 08 (200)
09 (225) 10 (250)
10 (250) 12 (300)
12 (300)15 (375)
16 (400)
18 (450)
Special sizes 24 (600)
INSULATED PLENUM BOX3.12
ADCI
Page. 4 Bradflo reserves the right to make changes to product without prior notice
Design dimensions
PLENUM BOX WITH MEASURER3.13
ADE
Page. 5
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
150 Inlet Diameter
350 Inlet Diameter
300 Inlet Diameter
250 Inlet Diameter
200 Inlet Diameter
Ordering ProcedureUsing the chart below, select your requirements and substitute the underscored text below.Type..X..Y..D
Example: If your requirement is for a 300mm square plenum with a 200mm dia inlet, the ordering codewould be: ADE..12..12..08. (When ordering it is not necessary to include the periods (..)).
Note! Other sizes are available upon request. Please contact your nearest Bradflo of
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
09(225)
10(250)
12(300)
15(375)
16(400)
18(450)
24(600)
Inlet Dia."D"
ADE 06 (150) 06 (150)
08 (200) 08 (200)
09 (225) 10 (250)
10 (250) 12 (300)
12 (300)15 (375)
16 (400)
18 (450)
Special sizes 24 (600)
PLENUM BOX WITH MEASURER3.13
ADE
Page. 6 Bradflo reserves the right to make changes to product without prior notice
Description
The 3.13 ADE plenums provide multiple functionsby incorporating into the acoustically designedplenum, a damper and measuring device.
The multi-function plenum provides a technical,acoustically highly effective air terminal device foruse with all types of square, rectangular and circulardiffusers. It includes a measuring and balancingdevice which provides a simple and effective
method of measuring and balancing air flow.
The damper is operated through the face of the dif-fuser as is the connections for the measuringdevice.
The design of the plenum provides even air flowacross the face of the diffuser.
The plenum is manufactured from galvanised steel.
Design dimensions
PLENUM BOX WITH MEASURER3.13
ADE
Page. 7Bradflo reserves the right to make changes to product without prior notice
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000150 +22 _17 +7 +7 +5 -4 -16200 +27 +16 +5 +6 +5 -5 -18250 +24 +16 +4 +5 +4 -6 -19300 +21 +13 +6 +7 +5 -7 -23350 +22 +14 +5 +6 +5 -7 -23
Tol +/- 2 2 2 2 2 2 2
Kok with jet pattern
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000150 14 10 8 8 8 9 7200 11 9 8 7 9 7 7250 11 7 7 6 8 7 6300 9 8 7 5 7 7 7350 8 6 5 6 7 6 7
Tol +/- 2 2 2 2 2 2 2
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
PLENUM BOX WITH MEASURER3.13
ADE
Page. 8 Bradflo reserves the right to make changes to product without prior notice
10 100Flow Rate (l/s)
10
100
1000Static Pressure (Pa)
40
20 50
50
500
200
35
30
25
Damper C
O
200
20
20
10 100Flow Rate (l/s)
10
100
1000Static Pressure (Pa)
40
20 50
50
500
200
35
3025
Damper C
O
200
20
300
20
10 100Flow Rate (l/s)
10
100
1000Static Pressure (Pa)
40
20 50
50
500
200
35
30
25
Damper C
O
200
20
500
20
10 100Flow Rate (l/s)
10
100
1000Static Pressure (Pa)
40
20 50
50
500
200
35
30
25
Damper C
O
200
20
500
20
150 Inlet diameter 200 Inlet diameter
300 Inlet diameter250 Inlet diameter
These graphs are for selection only and should not be used for commissioning
PLENUM BOX WITH MEASURER3.13
ADE
Page. 9Bradflo reserves the right to make changes to product without prior notice
100 1000
Flow Rate (l/s)
10
100
1000Static Pressure (Pa)
40
50
500
200
35
30
25
Damper C
O
200
20
500
20
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
2000
150125 150 175 200 225 250 300 350 400
50
5
50 50020020
Balancing graph
Example:If the measured differential pressure was 45 Pa and the size of the inlet 200 mm dia., the flow rate wouldbe approximately 170 l/s
350 Inlet diameter
LINEAR PLENUM3.31
ASA
Page. 10
DescriptionThe ASA is a plenum suitable for use with all types of linear grilles and diffusers. It is manufactured fromgalvanised steel.
Ordering procedureUsing the chart below, select your requirements and sustitute the underscored text ASA..N..U..D..E
Example: If your requirement is for a 4 slot 1200 mm long linear plenum with a 200 mm dia. inlet and a lefthand end, the ordering code would be: ASA..4..48..08..EL (When ordering it is not necessary to includethe periods [..])
Other sizes are available upon request. Please contact your nearest Bradflo office.
Product Size Numbers
"Type" No. of Slots"N"
Length"X"
Inlet dia."D"
No. of Ends"E" Colour
ASA 1 24 (600) 08 (200) 0E (No ends) Matt black on
2 36 (900) 09 (225) EL (One end left) inside faces
3 48 (1200) 10 (250) ER (One end right)
4 60 (1800) 2E (Two ends)
56
7
8
LINEAR PLENUM3.31
ASA
Page. 11 Bradflo reserves the right to make changes to product without prior notice
Design dimensions
PLENUM BOX WITH MEASURERFOR LINEAR DIFFUSERS
3.33ASE
Page. 12
Ordering ProcedureUsing the chart below, select your requirements and substitute the underscored text below.Type..N..X..D..E
Example: If your requirement is for a 300mm square plenum with a 200mm dia inlet, the ordering codewould be: ASE..4..48..08..EL. (When ordering it is not necessary to include the periods (..)).
Note! Other sizes are available upon request. Please contact your nearest Bradflo of
Product Size Numbers
"Type" No. of Slots"N"
Length"X"
Inlet dia."D"
No. of Ends"E" Colour
ASE 1 24 (600) 08 (200) 0E (No ends) Matt black on
2 36 (900) 09 (225) EL (One end left) inside faces
3 48 (1200) 10 (250) ER (One end right)
4 60 (1800) 2E (Two ends)
56
7
8
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
2 Slots x 1000 - 200
6 - 8 Slots x 1800 - 300
4 Slots x 1800 - 250
2 Slots x 1800 - 250
2 Slots x 1200 - 225
PLENUM BOX WITH MEASURERFOR LINEAR DIFFUSERS
3.33ASE
Page. 13 Bradflo reserves the right to make changes to product without prior notice
Description
The 3.33 ASE plenums provide multiple functions byincorporating into the acoustically designed plenum,a damper and measuring device.
The multi-function plenum provides a technical,acoustically highly effective air terminal device foruse with all types of square, rectangular and circulardiffusers. It includes a measuring and balancingdevice which provides a simple and effectivemethod of measuring and balancing air flow.
The damper is operated through the face of the dif-fuser as is the connections for the measuringdevice.
The design of the plenum provides even air flowacross the face of the diffuser.
The plenum is manufactured from galvanised steel.
Design dimensions
PLENUM BOX WITH MEASURERFOR LINEAR DIFFUSERS
3.33ASE
Page. 14Bradflo reserves the right to make changes to product without prior notice
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000200 +27 +16 +5 +6 +5 -5 -18225 +26 +16 +5 +6 +5 -5 -18250 +24 +16 +4 +5 +4 -6 -19300 +21 +13 +6 +7 +5 -7 -23
Tol +/- 2 2 2 2 2 2 2
Kok with jet pattern
Frequency (cycles per second)Size 125 250 500 1000 2000 4000 8000200 8 7 9 13 7 10 11225 7 6 8 11 6 10 10250 6 6 8 10 6 9 10300 5 6 7 9 5 9 8
Tol +/- 2 2 2 2 2 2 2
Sound data
NR levels for the grille may be determined from theengineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Sound absorption ΔL dB
The sound absorption shown relates to a reductionof the sound power level calculated from duct toroom. The end reflection is included in the values.
PLENUM BOX WITH MEASURERFOR LINEAR DIFFUSERS
3.33ASE
Page. 15 Bradflo reserves the right to make changes to product without prior notice
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50
50
2503530
25
Damper C
O
200
20
300 10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50
50
2503530
25
Damper C
O
200
20
300
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50
50
250
3530
25
Damper C
O
200
20
500
2 slots x 1000 x 200 Inlet diameter 2 slots x 1200 x 225 Inlet diameter
2 slots x 1500 x 250 Inlet diameter
These graphs are for selection only and should not be used for commissioning
PLENUM BOX WITH MEASURERFOR LINEAR DIFFUSERS
3.33ASE
Page. 16Bradflo reserves the right to make changes to product without prior notice
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50
50
250
3530
25
Damper C
O
200
20
300 10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50
50
250 3530
25
Damper C
O
200
20
300
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50
50
250
3530
25
Damper C
O
200
20
500
4 slots x 1000 x 200 Inlet diameter 4 slots x 1200 x 225 Inlet diameter
4 slots x 1500 x 250 Inlet diameter
These graphs are for selection only and should not be used for commissioning
PLENUM BOX WITH MEASURERFOR LINEAR DIFFUSERS
3.33ASE
Page. 17 Bradflo reserves the right to make changes to product without prior notice
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50
50
250 35
30
25
Damper C
O
200
20
300 10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50
50
250
3530
25
Damper C
O
200
20
500
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50
50
250
3530
25
Damper C
O
200
20
500
8 slots x 1000 x 225 Inlet diameter 8 slots x 1200 x 250 Inlet diameter
8 slots x 1500 x 300 Inlet diameter
These graphs are for selection only and should not be used for commissioning
PLENUM BOX WITH MEASURERFOR LINEAR DIFFUSERS
3.33ASE
Page. 18Bradflo reserves the right to make changes to product without prior notice
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
2000
150125 150 175 200 225 250 300 350 400
50
5
50 50020020
Balancing graph
Example:If the measured differential pressure was 45 Pa and the size of the inlet 200 mm dia., the flow rate wouldbe approximately 170 l/s
5FLEX
IBLE D
UC
TING
3PLEN
UM
S2
DIFFU
SERS
1G
RILLES &
LOU
VR
ES4
FITTING
S & A
CC
ESSOR
IESDam
pers, Equalisers & Measures
FITTINGS & ACCESSORIESDampers, Equalisers & Measures
Chapter Description Product Code
End-line duct measurer AMU
Measuring unit with balancing damper ARU
Opposed blade damper AOB
Damper & equalising deflector ACK
Adjustable steam splitter ASSD
Adjustable steam splitter AED
Bellmouth spigot AHSP4.36
4.35
4.34
4.32
4.31
4.21
4.11
HOMEHOME
END-LINE DUCT MEASURER4.11
AMU
Page. 1
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 30 35 40 45300
350
250200
150
400
Ordering procedureUsing the chart below, select your requirements and substitute the underscored text below Type..X
Example: If your requirement is for a 200mm diameter end-line measurer, and you wish to measurethrough the face of the grille, the ordering code would be: AMC200 (When ordering it is not necessary toinclude the periods [..])
Product Size Numbers
"Type" "X" Size Colour
AMC 125AME 150
200250300350400450
Special
END-LINE DUCT MEASURER4.11
AMU
Page. 2 Bradflo reserves the right to make changes to product without prior notice
Description
The end-line measurer is a fixed air measuringdevice for mounting in circular ductwork. It providesa very simple and highly accurate method of meas-uring the air flow.
The air flow rate is determined by measurement ofthe differential pressure across the mid mountedsensor then cross referenced to the diameter of theend-line measurer.
Sound data
NR levels for the diffuser may be determined fromthe engineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Frequency (cycles per second Hz)Size 125 250 500 1000 2000 4000 8000125 +15 +9 +1 -6 -13 -21 -28150 +15 +6 -3 -9 -13 -20 -29175 +15 +6 -2 -6 -11 -18 -27200 +17 +7 +1 -3 -6 -13 -21225 +17 +7 0 -4 -6 -13 -19250 +17 +6 -1 -5 -7 -13 -19300 +17 +6 -2 -5 -9 -15 -25350 +17 +7 -1 -3 -7 -14 -22400 +17 +5 +1 -1 -5 -14 -21450 +16 +5 0 -1 -4 -13 -20
Tol +/- 2 2 2 2 2 2 2
END-LINE DUCT MEASURER4.11
AMU
Page. 3Bradflo reserves the right to make changes to product without prior notice
These graphs are for selection only and should not be used for commissioning
Performance data
Balancing graph
Engineering graphsThe performance data graph is not to be used for balancing.
Example:If the measured differential pressure was 45 Pa and the size of the measurer 175mm diameter, the flowrate would be approximately 120 l/s
10 100 1000
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
50
125 150 175 200 225 250 300 350 400 450
45
40
5
50
35
30
300020 500
150500
550
200
10 100 1000
Flow Rate (l/s)
1
10
100
Differential Pressure (Pa) 125 150 175 200 225 250 300 350 400 450 500150
2000200 50020 50
50
5
MEASURING UNIT WITHBALANCING DAMPER
4.21ARU
Page. 4
Product Size Numbers
"Type" "X" Size Colour
ARC 125ARE 150
200250300350400450
Special
Ordering procedureUsing the chart below, select your requirements and substitute the underscored text below Type..X
Example: If your requirement is for a 200mm diameter end-line measurer, and you wish to measurethrough the face of the grille, the ordering code would be: ARC200 (When ordering it is not necessary toinclude the periods [..])
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 30 35 40 45300
350
250200
150
400
MEASURING UNIT WITHBALANCING DAMPER
4.21ARU
Page. 5 Bradflo reserves the right to make changes to product without prior notice
Description
The 4.21 ARU is a fixed air measuring device formounting in circular ductwork. It provides a verysimple and highly accurate method of measuring theair flow.
The air flow rate is determined by measurement ofthe differential pressure across the mid mountedsensor then cross referenced to the diameter of themeasuring unit.
There are two different models for damper adjust-ment. The ARC model with inside control cords andtest tubes which must be accessed through the faceof the grille or diffuser and the ARE model whichhas the damper control and test tubes external tothe unit. A control motor may be fitted to the AREmodel.
The unit is constructed out of galvanised steel.
Design dimensions ARC model
Design dimensions ARE model
X Size B125 340150 360200 380250 425300 480350 545400 560450 590
MEASURING UNIT WITHBALANCING DAMPER
4.21ARU
Page. 6Bradflo reserves the right to make changes to product without prior notice
These graphs are for selection only and should not be used for commissioning
Sound data
NR levels for the diffuser may be determined fromthe engineering graph.
Sound power level Lw
The generated sound power level Lw dB is calculat-ed by adding the correction factor Kok (see tablebelow) to the sound level NR dB according to theformula:
Lw = NR + Kok
Frequency (cycles per second Hz)Size 125 250 500 1000 2000 4000 8000125 +16 +7 -1 -10 +17 -28 -33150 +16 +8 0 -7 +13 -23 -29200 +16 +6 -3 -9 -14 -23 -32250 +16 +8 -2 -5 -10 -19 -27300 +15 +9 +1 -3 -8 -18 -27350 +15 +9 +1 -2 -7 -18 -26400 +15 +8 -2 -1 -7 -18 -24450 +15 +8 _3 -1 -7 -18 -24
Tol +/- 2 2 2 2 2 2 2
10 100Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
40
20 50
5
250
50
35
30
45
Damper C
O
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
40
20 50
5
250
50
35
30
5045
Damper
200
C
O
Engineering graphsTo determine the air flow using measured differen-tial pressure, refer to the balancing graph at the endof this section.
ARU Size 125 dia. ARU Size 150 dia.
MEASURING UNIT WITHBALANCING DAMPER
4.21ARU
Page. 7 Bradflo reserves the right to make changes to product without prior notice
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50 300
5
250
50
35
30
40
45Damper C
O
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50 500
5
250
50
35
30
40
45
Damper C
O
200
ARU Size 200 dia. ARU Size 250 dia.
ARU Size 300 dia. ARU Size 350 dia.
These graphs are for selection only and should not be used for commissioning
10 100
Flow Rate (l/s)
1
10
100
Static Pressure (Pa)
20 50 500
5
250
50
35
30
40
45Damper C
O
200 100 1000Flow Rate (l/s)
10
100
Static Pressure (Pa)
200
500
50
35
30
40
45
DamperC
O
500
20
200
50
MEASURING UNIT WITHBALANCING DAMPER
4.21ARU
Page. 8Bradflo reserves the right to make changes to product without prior notice
100 1000
Flow Rate (l/s)
10
100
Static Pressure (Pa)
200
500
50
35
30
40
45
DamperC
O
500
20
200
50
2000 100 1000
Flow Rate (l/s)
10
100
Static Pressure (Pa)500
50
35
30
40
45
Damper C
O
20
200
50
200 500 2000
ARU Size 400 dia. ARU Size 450 dia.
These graphs are for selection only and should not be used for commissioning
10 100 1000
Flow Rate (l/s)
1
10
100
Differential Pressure (Pa)
2000
150125 150 200 250 300 350 400 450 500
50
5
50 50020020
Example:If the measured differential pressure was 45 Pa and the size of the measurer 200mm diameter, the flowrate would be approximately 170 l/s
Balancing graph
OPPOSED BLADE DAMPER4.31
AOB
Page. 9
Sound Selection Chart
NR dB
Selection Guide
10 100 100050 500 5000
Size
l/s
Min 20 25 30 35
150 X 300
250 X 600300 X 600
300 X 900
200 X 600150 X 600
150 X 450
Product Size Numbers"Y" Size
"Type" "X" Size 06(150)
08(200)
10(250)
12(300)
14(350)
16(400)
18(450)
20(500)
24(600)
36(900) Colour
AOBD 06 (150) Black08 (200)10 (250)
12 (300)
14 (350)
16 (400)
18 (450)
Special
Ordering ProcedureUsing the chart below, select your requirements and substitute the underscored text below.AOBD..X..Y
Example: If your requirement is for a 200mm square opposed blade damper, the ordering code would be:AOBD0808 (When ordering it is not necessary to include the periods (..)).
Special sizes are available upon request. Contact your nearest Bradflo Office.
Chapter/ Brad Code Bradflo Product Code Metalflex Product Number Metalflex Product Description4.31 AOB AOBD0606P 3214036 OPPOSED BLADE DAMPER 150X150
AOBD0804P 3214065 OPPOSED BLADE DAMPER 200 X 100 NOMINALAOBD0806 3214287 OPPOSED BLADE DAMPER 200X150
AOBD0806P 3214024 OPPOSED BLADE DAMPER 200X150AOBD0808 3215212 OPPOSED BLADE DAMPER 200X200
AOBD0808P 3214040 OPPOSED BLADE DAMPER 200X200AOBD0909P 3214039 OPPOSED BLADE DAMPER 225X225AOBD1006P 3214025 OPPOSED BLADE DAMPER 250X150AOBD1008P 3214046 OPPOSED BLADE DAMPER 250X200AOBD1010P 3214049 OPPOSED BLADE DAMPER 250X250AOBD1204 3214288 OPPOSED BLADE DAMPER 300X100
AOBD1204P 3214041 OPPOSED BLADE DAMPER 300X100AOBD1206 3214294 OPPOSED BLADE DAMPER 300X150
AOBD1206P 3214043 OPPOSED BLADE DAMPER 300X150AOBD1208 3214292 OPPOSED BLADE DAMPER 300X200
AOBD1208P 3214042 OPPOSED BLADE DAMPER 300X200AOBD1210P 3214051 OPPOSED BLADE DAMPER 300X250AOBD1212P 3214052 OPPOSED BLADE DAMPER 300X300AOBD1406 3214303 OPPOSED BLADE DAMPER 350X150
AOBD1406P 3214047 OPPOSED BLADE DAMPER 350X150AOBD1408P 3214050 OPPOSED BLADE DAMPER 350X200AOBD1410 3214310 OPPOSED BLADE DAMPER 350X250AOBD1414 3214362 OPPOSED BLADE DAMPER 350X350AOBD1515 3214385 OPPOSED BLADE DAMPER 375X375
AOBD1515P 3214029 OPPOSED BLADE DAMPER 375X375AOBD1604 3214306 OPPOSED BLADE DAMPER 400X100
AOBD1606P 3214045 OPPOSED BLADE DAMPER 400X150AOBD1608 3214309 OPPOSED BLADE DAMPER 400X200
AOBD1608P 3214048 OPPOSED BLADE DAMPER 400X200AOBD1610 3214336 OPPOSED BLADE DAMPER 400X250
AOBD1610P 3214054 OPPOSED BLADE DAMPER 400X250AOBD1612P 3214056 OPPOSED BLADE DAMPER 400X300AOBD1616P 3214031 OPPOSED BLADE DAMPER 400X400AOBD1806P 3214027 OPPOSED BLADE DAMPER 450X150AOBD1808 3214321 OPPOSED BLADE DAMPER 450X200
AOBD1808P 3214053 OPPOSED BLADE DAMPER 450X200AOBD1810P 3214055 OPPOSED BLADE DAMPER 450X250AOBD1812 3214367 OPPOSED BLADE DAMPER 450X300
AOBD1812P 3214030 OPPOSED BLADE DAMPER 450X300AOBD1818P 3214060 OPPOSED BLADE DAMPER 450X450AOBD2004 3214308 OPPOSED BLADE DAMPER 500X100
AOBD2006P 3214390 OPPOSED BLADE DAMPER 500X150AOBD2008P 3214057 OPPOSED BLADE DAMPER 500X200AOBD2010P 3214028 OPPOSED BLADE DAMPER 500X250AOBD2012 3214422 OPPOSED BLADE DAMPER 500X300
AOBD2012P 3214323 OPPOSED BLADE DAMPER 500X300AOBD2020P 3214033 OPPOSED BLADE DAMPER 500X500AOBD2208P 3214058 OPPOSED BLADE DAMPER 550X200AOBD2404 3214325 OPPOSED BLADE DAMPER 600X100
AOBD2406P 3214062 OPPOSED BLADE DAMPER 600X150AOBD2408P 3214061 OPPOSED BLADE DAMPER 600X200AOBD2410 3214466 OPPOSED BLADE DAMPER 600X250
AOBD2410P 3214064 OPPOSED BLADE DAMPER 600X250AOBD2412 3214468 OPPOSED BLADE DAMPER 600X300
AOBD2412P 3214063 OPPOSED BLADE DAMPER 600X300AOBD2416P 3214032 OPPOSED BLADE DAMPER 600X400AOBD2424P 3214553 OPPOSED BLADE DAMPER 600X600AOBD2608P 3214119 OPPOSED BLADE DAMPER 650X200
AOBDMTB1/4P 3214059 OPPOSED BLADE DAMPER NMNL SIZE 565 X 265AOBDMTBF 3214766 OPPOSED BLADE DAMPER 565X1165AOBDMTBH 3214502 OPPOSED BLADE DAMPER 565X565
AOBDMTBHP 3214137 OPPOSED BLADE DAMPER NMNL SIZE 565 X 565
Metalflex Coded Products
OPPOSED BLADE DAMPER4.31
AOB
Page. 10 Bradflo reserves the right to make changes to product without prior notice
Design dimensions
Note!Maximum X size is 450 mm per section. For larger grilles, dampers must bemade in sections to suit.
Description
The 4.31 opposed blade damper has beendesigned to fit on grilles. Adjustment is carried outthrough the face of the grille.
The damper is manufactured from extruded alumini-um and is painted matt black as standard.
OPPOSED BLADE DAMPER4.31
AOB
Page. 11Bradflo reserves the right to make changes to product without prior notice
10 100 1000
Flow Rate (l/s)
1
10
Static Pressure (Pa)
50
0.03 0.04 0.06 0.10 0.15 0.24
40
35
30
5000
5
50
25
20
50020
20
0.05 0.08 0.12 0.18
0.33
0 5 10 15 201
2
3
4
5
Thro
ttled
dam
per
/ Ope
n da
mpe
r
Sound dataNR levels for the damper may be determined fromthe engineering graph.
X/Y 200 300 400 500 600 750 900 1200150 0.02 0.04 0.05 0.06 0.07 0.10 0.11 0.15200 0.03 0.05 0.07 0.08 0.10 0.13 0.15 0.21250 0.04 0.06 0.08 0.10 0.13 0.16 0.19 0.26300 0.05 0.08 0.10 0.13 0.16 0.20 0.23 0.31350 0.06 0.09 0.12 0.15 0.18 0.23 0.27 0.36400 0.07 0.10 0.14 0.17 0.21 0.26 0.31 0.42450 0.08 0.11 0.16 0.20 0.23 0.29 0.35 0.47
Free area in m2 for standard sizes.
These graphs are for selection only and should not be used for commissioning.
DAMPER & EQUALISINGDEFLECTOR
4.32ACK
Page. 12
Product Size Numbers
"Type" "X" Size Colour
ACK 125 Black160200315400
Special
DescriptionThe 4.32 circular damper with equalising grid has individualy adjustable blades to regulate flow. Thedamper body is manufactured from galvanised steel and the blades extruded aluminium.
FinishThe standard finish is matt black.
Ordering procedureUsing the chart below, select your requirement and substitute the underscored text below ACK..X
Example: If your requirement is for a 200 diameter damper, the ordering code would be: ACK200 (Whenodering it is not neccessary to include the periods [..])
DAMPER & EQUALISINGDEFLECTOR
4.32ACK
Page. 13 Bradflo reserves the right to make changes to product without prior notice
Design dimensions
ADJUSTABLE STREAMSPLITTER
4.34ASSD
Page. 14
Product Size Numbers"Y" Size
"Type" "X" Size06
(150)08
(200)09
(225)10
(250)12
(300)15
(375)16
(400)Colour
ASSD 06 (150) Black08 (200)09 (225)
10 (250)
12 (300)
15 (375)
18 (450)
24 (600)
Special
DescriptionThe 4.34 (ASSD) adjustable stream splitter is designed for use on large duct take offs in industrial or rela-tively low cost commercial systems.The stream splitter damper has a screw adjustment through the face of the grille or diffuser.Standard finish is matt black over galvanised steel.
Ordering ProcedureUsing the chart below, select your requirements and substitute the underscored text below.ASSD..X..Y
Example: If your requirement is for a 200mm x 400mm damper, the ordering code would be:ASSD..08..16. (When ordering it is not neccessary to include the periods (..)).
Specials sizes are available. Contact your nearest Bradflo office.
ADJUSTABLE STREAMSPLITTER
4.34ASSD
Page. 15 Bradflo reserves the right to make changes to product without prior notice
Design dimensions
Note! C = (X x 0.258) +30
ADJUSTABLE STREAMSPLITTER
4.35AED
Page. 16
Product Size Numbers"Y" Size
"Type" "X" Size 150 200 250 300 400 450 500 600 Colour
AED (square) 150 BlackAEDC (Circular) 200
250300400450500600
Special
DescriptionThe 4.35 (AED) equalising grid spreads the airflow over the face of the grille or diffuser.Th air equalising grid has individual adjustable blades.The grid is manufactured from galvanised steel with aluminium extruded blades.The finish is matt black.
Ordering ProcedureUsing the chart below, select your requirements and substitute the underscored text below.Type..X..Y for square grids or Type..X for circular grids.
Example: If your requirement is for a 200mm x 400mm grid, the ordering code would be: AED..200..400.(When ordering it is not neccessary to include the periods (..)).
Other sizes are available upon request. Contact your nearest Bradflo office.
ADJUSTABLE STREAMSPLITTER
4.35AED
Page. 17 Bradflo reserves the right to make changes to product without prior notice
Design dimensions
BELLMOUTH SPIGOT4.36
AHSP
Page. 18
DescriptionThe bellmouth spigot and damper is a high efficiency, energy saving product suitable for both high and lowvelocity applications. The spigot is manufactured from galvanised steel.
Ordering procedureUsing the chart below, select your requirement and substitute the underscored text Type..D
Example: If your requirement is for an 8” (200 mm) diameter bellmouth spigot with a damper fitted, theordering code would be AHSPD08
Product Size Numbers
"Type" "X" Size Colour
AHSP 5 (125)AHSPD 6 (150)
7 (175)
8 (200)
9 (225)
10 (250)
12 (300)
BELLMOUTH SPIGOT4.36
AHSP
Page. 19 Bradflo reserves the right to make changes to product without prior notice
Design dimensions
NOMINALFLEXSIZE"A"
BELLMOUTH FLANGEDIMENSIONS
LENGTH"B"
HOLE"C"
DIAMETER"D"
mm125
mm165
mm200
mm225
150 165 225 255
175 165 255 280
200 165 280 305
225 165 305 330
250 165 330 355
300 165 380 405
BELLMOUTH SPIGOT4.36
AHSP
Page. 20Bradflo reserves the right to make changes to product without prior notice
0 25 50 75 100 125 150 175 200 225 250 275 300
Flow Rate (l/s)
0
25
50
75
100
125
150
175
200Static Pressure (Pa)
SPIN-IN SPIGOT
SPUN ALUM FLANGED SPIGOT
BELLMOUTH SPIGOT
Performance comparison (150mm duct)Comparative static pressure/ air-flow tests indicate that the bell-mouth spigot is over 20% moreefficient than equivalent spun alu-minium or steel flanged spigots orspin-in spigots.
0 100 200 300 400 500 600 700 800 900 1000 1100 1200
Flow Rate (l/s)
0
25
50
75
100
125
150
175
200Static Pressure (Pa)
The performance data for the bell-mouth spigots has been based ontests undertaken without ductingattached. The additional pressuredrop resulting from the flexibleducting needs to be accounted forin the final calculations.
Performance data
4FITTIN
GS &
AC
CESSO
RIES
Dampers, Equalisers & M
easures3
PLENU
MS
2D
IFFUSER
S1
GR
ILLES & LO
UV
RES
5FLEX
IBLE D
UC
TING
FLEXIBLE DUCTINGChapter Description
5.10
HOMEHOME
Insulated duct 4 Zero Flex
INSULATED FLEXIBLE DUCT 4-Zero
5.10
Page. 1
DescriptionBradflo Aludec 4-Zero Range of flexible duct has been tested and meets all requirements of Australian Standards AS 4254.1 2012 and Building Codes of Australia Domestic and Commercial Air Handling Systems.
The Aluminium- Laminated Inner core with Metalized Outer Sleeve has a multi-layered construction containing Flame Retardant Water based adhesive with high tensile wire helix encapsulated.
The insulation used is a safe allergen free polyester fibre which can be produced with Thermal ratings of R0.6 / R1.0/ R1.5 and R2.0.
Feautres• Aluminum Laminate Inner Core• Polyester Insulation• Metalized Outer Fire Jacket• Operating Temperature: -20°C to +80°C• Operation Pressure: -200pa to +1200pa• General Use: Heating and cooling / Ventilation.• Domestic and commercial systems• Complies with AS 4254
Metalflex Product Code Metalflex Product Description3212047 Bradflo Ins. Duct 4.0 R0.6 150mm X 6M3212048 Bradflo Ins. Duct 4.0 R0.6 200mm X 6M3212049 Bradflo Ins. Duct 4.0 R0.6 250mm X 6M3212050 Bradflo Ins. Duct 4.0 R0.6 300mm X 6M3212051 Bradflo Ins. Duct 4.0 R0.6 350mm X 6M3212052 Bradflo Ins. Duct 4.0 R0.6 400mm X 6M3212053 Bradflo Ins. Duct 4.0 R0.6 450mm X 6M3212054 Bradflo Ins. Duct 4.0 R0.6 500mm X 6M3212055 Bradflo Ins. Duct 4.0 R1.0 150mm X 6M3212056 Bradflo Ins. Duct 4.0 R1.0 200mm X 6M3212057 Bradflo Ins. Duct 4.0 R1.0 250mm X 6M3212058 Bradflo Ins. Duct 4.0 R1.0 300mm X 6M3212059 Bradflo Ins. Duct 4.0 R1.0 350mm X 6M3212060 Bradflo Ins. Duct 4.0 R1.0 400mm X 6M3212078 Bradflo Ins. Duct 4.0 R2.0 500mm X 3M3212061 Bradflo Ins. Duct 4.0 R1.0 450mm X 6M3212062 Bradflo Ins. Duct 4.0 R1.0 500mm X 6M3212063 Bradflo Ins. Duct 4.0 R1.5 150mm X 6M3212064 Bradflo Ins. Duct 4.0 R1.5 200mm X 6M3212065 Bradflo Ins. Duct 4.0 R1.5 250mm X 6M3212066 Bradflo Ins. Duct 4.0 R1.5 300mm X 6M3212067 Bradflo Ins. Duct 4.0 R1.5 350mm X 6M3212068 Bradflo Ins. Duct 4.0 R1.5 400mm X 6M3212069 Bradflo Ins. Duct 4.0 R1.5 450mm X 6M3212070 Bradflo Ins. Duct 4.0 R1.5 500mm X 6M3212071 Bradflo Ins. Duct 4.0 R2.0 150mm X 3M3212072 Bradflo Ins. Duct 4.0 R2.0 200mm X 3M3212073 Bradflo Ins. Duct 4.0 R2.0 250mm X 3M3212074 Bradflo Ins. Duct 4.0 R2.0 300mm X 3M3212075 Bradflo Ins. Duct 4.0 R2.0 350mm X 3M3212076 Bradflo Ins. Duct 4.0 R2.0 400mm X 3M3212077 Bradflo Ins. Duct 4.0 R2.0 450mm X 3M
Metalflex Coded Products
The square, cone-type directional diffuser hasbeen designed to meet modern buildingrequirements. Standard frame configurationsare available which are suitable for T-bar, tile orplaster ceilings. The core section is removablefor easy installation and maintenance.
Directional diffusers can be manufactured witha variety of blow patterns to suit anyapplication. Sizes and colours are limited onlyby the imagination.
ACTL, ACTB
ACTLACTB
ACTBACTL
Perforated diffusers are designed to fit mostsuspended ceilings. The perforated plate is easilyremoved from the fixed frame for fitting andcleaning. A lockable version is also available.
APD, APDE, APDEL
Circular perforated supply air diffusers aredesigned for draught free conditions normallyrequired in schools, offices and hotels.
APR
The Environment 2000 is an exclusive range ofair distribution devices designed to supply adraught free, quiet and pleasant atmosphere.The Environment 2000 can be supplied as adiffuser only or as a complete kit featuring anacoustic plenum and air measuring station. Thisproduct can also be used as a matching returnor exhaust air grille.
APME, APMF, APM
APR
APM
APD
APDEL
DIRECTIONAL DIFFUSERS
PERFORATED DIFFUSERS
HOMEHOME
Circular cone diffusers are designed withmultiple cones which are fully adjustable to varythe discharge pattern. This unique style ofdiffuser is ideal for large areas requiring state ofthe art airflow and appearance, for instance, inlobbies, foyers and arenas.
ACDSC, ACDRA
Round ceiling diffusers are used primarily forsupply air situations. The core, which controlsboth air pattern and air volume, is fullyadjustable. These diffusers are also fitted withspigots to suit flexible duct. This product canprovide an attractive alternative in bathroomexhaust applications.
ARCD
Jet diffusers are designed for use in large areassuch as sport centers, theatres, entertainmentand industrial areas. They are suitable for air-conditioning evaporative cooling or ventilationapplications. Air flow is easily adjusted from ajet to a diffused pattern and the directionadjusted by moving the core through an arc.
New to Bradflo is the flush mounted low profilejet style diffuser, ideal for ventilating smallerareas such as cafe‘s, show rooms and retailoutlets.
AJD, AJA, AJS, AJAS, ADJD
ACDSC
ACDRA
ACDRA
ARCD
AJD
AJSAJA
AJAS
ADJD
CIRCULAR DIFFUSERS
JET DIFFUSERS
HOMEHOME
Linear slot diffusers are an extremely versatileproduct and can be used to supply or return air.There are two choices of blade profiles that areadjustable to offer air pattern variations. Thesediffusers are supplied in a range of one to eightslots.
ALDU, ALDA
Plenum diffusers are designed to suit ceilingT-Bar systems and are suitable for eitherperimeter or centre zone air-conditioning. This isdue to the diffuser’s fully adjustable air patterncharacteristics. An integral component of thissystem is the ability to attach the diffuser torecessed fluorescent light fittings. Insulatedplenums are also available.
AVPA, AABS, AABD
Slimline bar grilles offer an attractivealternative for sidewall, sill or floor mounted airdiffusion requirements. They can be used eitheras supply or return grilles and are available infixed or removable core.
Bradflo offers six different core profiles witheach delivering a distinctive air pattern.Slimline bar grilles are also available as atrafficable product.
ASG, ASGF
ASG
ASGF
ALDA
ALDU
AABD
AABS
AVPA
ASG
LINEAR SLOT DIFFUSERS
PLENUM DIFFUSERS
BAR GRILLES
HOMEHOME
Variable deflection grilles, also known assidewall registers, are designed for mountingdirectly into a bulkhead or are connected toductwork. Curved face options are available formounting into circular or oval ductwork withremovable core models providing access formaintenance and cleaning.
AUR, AURR, AUS2, AURC
Curved blade grilles, referred to asmulti-directional outlets, are designed forceiling mounted supply air situations. They areespecially suited for evaporative coolingsystems. These grilles are available in one, two,three or four-way blow patterns and aredesigned to provide the most efficientoperation at the lowest possible sound level.
ACB
Both horizontal and vertical louvres areavailable in wide varieties of profiles that coverall applications including weather proof, doublerain trap and storm proof.
Bradflo louvre systems can also be used as anarchitectural decorative cladding in any shapeor size and are ideal for theconstruction of penthousesand enclosures.
AWL
ACB
AUS2
AURC
AUR
ACB
AWL
Half chevron grilles are an attractive wallmounted return air product. A range of bladeprofiles are available including standard andslimline options. These grilles can bemanufactured with hinged or removable coreto accommodate a wide variety of filters.
Half chevron grilles can also be utilised as adecorative grille or infill panels.
ARG
ARG
ARG
ARG
VARIABLE DEFLECTION GRILLES
HALF CHEVRON GRILLES
LOUVRES
HOMEHOME
Aluminium door grilles have horizontallymounted blades that are firmly fixed into aframe. To remain aesthetically pleasing, anadjustable rear frame covers the opening of thegrille on the opposite side of the door.A slimline channel frame is also available.
AADR, ADDR3
The acoustic transfer grille is a rectangular airtransfer device for direct wall mounting. Thegrille is double sided and is identical on bothsides. The construction of the grille allows highairflow while minimising sound transmission.
ATJAADR
ATJ
Egg crate grilles are designed for use inexhaust or return air situations and may bemounted in walls or ceilings. Hinged andremovable core models are available asstandard and provide easy access to filters,fans or other equipment.
The versatile egg crate grille can also besupplied as panels for infill applications andagain sizes and colours are limited only by yourimagination.
AEC, AECL, AEHF, AECOR, AEGGCRT
AAECSNA
AEC
AECRC
AEHF
AECOR AEGGCRT
ADDR3
EGG CRATE GRILLES
AIR TRANSFER GRILLES
HOMEHOME
Floor registers are made of a sturdy all-steelconstruction, suiting both domestic andcommercial applications. A wide range ofstandard colours and sizes are available uponrequest.
ASFR
AHDF
ASFR
ASFR
ASFF
Heavy-duty floor grilles are constructed of anexpanded steel mesh core with a fully weldedsteel frame. They may be used as heavy-dutyexhaust grilles for underground car parks. Floorgrilles may also be used for return airsituations. Balancing dampers can be fittedbehind the grille.
AHDF
Computer floor grilles are an attractive slimlinebar grille, reinforced for trafficable situations.This product can be supplied as a grille in aframe or in continuous form. Six blade profilesare available offering a variety of air patterns.Many colours are available on request.
ASFF, AAFF, ASTF, ASTFI
ASTFI
AAFF
FLOOR GRILLES
FLOOR REGISTERS
HOMEHOME
End of line or plenum mounted measuringdevices, in conjunction with balancingdampers, offer a simple and accurate methodof measuring the airflow. These measuringdevices are compatible with a wide range ofBradflo diffusion products.
AMU, ARU
Bradflo manufactures a full range of dampersincluding Opposed Blade, Stream Splitter andEqualising Grid. Our spigot range includesBellmouth Spigots with or without ButterflyDampers as well as Straight Spigots and BranchTakeoffs.
AOBD, AHSP, ACK, ASSD
Plenum Boxes are manufactured to suit theentire Bradflo diffuser and grille range.Plenums can be supplied un-insulated or withacoustic and thermal insulation. Air measuringdevices and/or dampers can be factory fittedor supplied separately.
ADC, ADCI, ADE, ASE
AMU
ACK
ASSD
ADC
AOBD
Volume control dampers are available in eitheropposed blade or parallel blade configurations.Manufactured from heavy duty aluminiumextrusions, volume control dampers may beconfigured for manual or motorised operationand there is a choice of either gear or linkagedrive.
AVCD, DVCDVCD
PLENUMS FITTINGS ANDACCESSORIES
PLENUMS
VOLUME CONTROL DAMPERS
HOMEHOME
A3ZD
4 ZERO NUDE CORE DUCTS
Bradflo Aludec 4-Zero Range of flexible duct
has been tested and meets all requirements of
Australian Standards AS 4254.1 2012 and
Building Codes of Australia Domestic and
Commercial Air Handling Systems.
The Aluminium- Laminated Inner core with
Metalized Outer Sleeve has a multi-layered
construction containing Flame Retardant Water
based adhesive with high tensile wire helix
encapsulated.
The insulation used is a safe allergen free
polyester fibre which can be produced with
Thermal ratings of R0.6 / R1.0/ R1.5 and
R2.0.
.Features:
• Aluminium Laminate Inner Core
• Polyester Insulation
• Metalized Outer Fire Jacket
• Operating Temperature: -20°C to +80°C
• Operation Pressure: -200pa to +1200pa
• General Use: Heating and cooling /
Ventilation.
• Domestic and commercial systems
• Complies with AS 4254
HOMEHOME