of 57
8/16/2019 Alroc Preparation Tools
1/57
Edition July 2012 – Illustrations non contractual
HIGH VOLTAGE
CATALOG
July 2012
ALROC
Z.I. de la Fonderie
72160 Tuffé
FRANCE
Tel. : +33 (0)2 43 71 11 80
Fax : +33 (0)2 43 71 16 51
www.alroc.fr
8/16/2019 Alroc Preparation Tools
2/57
Edition - July 2012
2
The SIBILLE INDUSTRIE GROUP ESP division is a manufacturer of electrical safety equipment.
Our products are intended for technicians and teams who build, maintain and operate
power systems in a high-risk environment (low, medium and high voltage).
The goals aspired to by our group since its creation are to:
Protect individuals against electrical risks
Provide products ensuring maximum security
Develop risk prevention among those working within the industry
ESP focuses on innovation in order to provide solutions adapted to evolving global
technological networks and thereby effectively optimizes power distribution and
management.
OUR VALUES
Customer satisfaction by providing innovative, quality products
100% of our factories are in France
Employee satisfaction through a respectful and participative management system
8/16/2019 Alroc Preparation Tools
3/57
Edition - July 2012
3
Fondée en 1940, la société ALROC, a su se positionner
comme le leader mondial depuis la fin des années
1980 dans la fabrication des outils et machines pour la
préparation des câbles :- Electriques (basse, moyenne et haute tensions)
- Fibres optiques et téléphoniques
- Coaxiaux et spéciaux
ALROC a rejoint le groupe SIBILLE INDUSTRIE depuis
décembre 2007, et a exporté ses produits dans plus de
50 pays à ce jour.
La société ALROC s’est dotée des moyens
technologiques et informatiques les plus performants
pour concevoir (C.A.O., F.A.O. G.P.A.O.), fabriquer sesproduits (centres d’usinage et tours à commande
numérique, injection plastique).
De cette manière, ALROC apporte des réponses sur
mesure aux besoins spécifiques de sa clientèle.
Support Technique
Au-delà du support téléphonique, ALROC est aussi
dotée d’un système audiovisuel afin d’offrir unsupport technique en direct auprès de vos
collaborateurs.
ALROC est aussi en mesure d’offrir une formationprise en main dans ses locaux.
Established in 1940, ALROC has become as of the late
1980’s one of the worldwide leading companies
specialized in the fabrication of cable preparation tools
and machines to prepare:- Electrical cables (low, medium and high voltage)
- Optic fiber and telecommunication cables
- Coaxial and special cables
As of December 2007, ALROC is now part of the group
SIBILLE INDUSTRIE and has exported its products to
more than 50 countries to date.
ALROC is equipped with the best high-tech machines
tools and data processing systems to design and to
manufacture its products.
Consequently, ALROC offers customized design to
meet specific customer requirements.
Technical Support
Beyond the technical hotline, ALROC is also equipped
with an audiovisual system to offer live visualassistance with our users.
In addition to the above, ALROC also offers training
sessions on site with a view on training in the handling
of the tools.
Fonderie
Foundry shop
Centres d’usinage à
commande numérique
Machine tool shop
jection plastique
Plastic injection
Bureau d’étude
Engineering department
Montage
Assembly line
Tour à commande numérique
Machine tool shop
8/16/2019 Alroc Preparation Tools
4/57
Edition - July 2012
4
INDEX
OUTER JACKET ................................................................................................ 7
Single cut (reinforced & alarmed) for outer jacket - DMSR ....................... 9
Jacket spreader - EGA .............................................................................. 11
Lead spreader - EVP EV HTB ................................................................ 12
Cable handler - CAS ................................................................................. 13
Double cut for outer jacket - DM25-60-DC.............................................. 14
Single cut for outer jacket - DM .............................................................. 15
Single cut (alarmed) for outer jacket - DMS ........................................... 16
Semi-conductor remover on outer jacket - AUG5/60-160 ...................... 17
SEMI-CONDUCTOR .....................................................................................19
See also multifunctions tools CAMF5, CMF4, CMF5, AML and C/PP
LHS ........................................................................................................... 21
Restore cylindrical shape - ASR ................................................................ 22
Restore cylindrical shape with superiror finition - ASR/F ........................ 23
INSULATION ...................................................................................................25
See also multifunctions tools CAMF5, CMF4, CMF5, AML and C/PP
LH ............................................................................................................. 27
http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651850http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651852http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651853http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651854http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651855http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651856http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651857http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651858http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651858http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651862http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651863http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651864http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651864http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651866http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651866http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651864http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651863http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651862http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651858http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651857http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651856http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651855http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651854http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651853http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651852http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651850
8/16/2019 Alroc Preparation Tools
5/57
Edition - July 2012
5
CHANNEL & CONE ON INSULATION ....................................................29
Cone on insulation NO SILICONE - CHN - NS ........................................... 31
Cone finishing - TC ................................................................................... 32
Channel - LHP ........................................................................................... 33
Channel NO SILICONE - LHP5 NS ............................................................. 34
Choice of blades for LHP tools .................................................... 35
MULTIFUNCTIONS (SEMI-CONDUCTOR + INSULATION) ...........................39
SUPER FINITION + NO SILICONE - CAMF5/55-160-NS ............................ 41
NO SILICONE - CMF4/60-110-NS CMF5/100-160-NS ........................... 42
K7/FSC (pour MF4/60-110-NS et MF5/100-160-NS) .................. 43
ASI/40-80 ................................................................................................. 44
GRI-RTE .................................................................................................... 45
MOTORIZED MULTIFUNCTIONS (SEMI-CONDUCTOR + INSULATION) 47
AML .......................................................................................................... 49
Blade add-on to remove insulation - K7i/ ................................... 50
Electrical sander - C/PP ........................................................................... 51
CABLE CLAMP ................................................................................................53
For Ø >50mm, cable clamp for all HTB ALROC tools - BMFD/50-160 .... 54
SAV.....................................................................................................................55
http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651868http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651868http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651868http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651868http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651869http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651870http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651872http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651873http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651874http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651874http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651875http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651875http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651875http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651875http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651875http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651877http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651878http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651880http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651881http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651882http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651882http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651883http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651883http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651883http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651883http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651883http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651884http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651885http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651867http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651887http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651887http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651867http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651885http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651884http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651883http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651882http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651881http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651880http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651878http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651877http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651875http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651874http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651873http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651872http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651870http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651869http://c/Users/nicolas.david/Desktop/catalogue-new-htb-v0-fr%20-Juin%202012%20%20-%20%20v%203.2.doc%23_Toc328651868
8/16/2019 Alroc Preparation Tools
6/57
Edition - July 2012
6
OUTER JACKET
p.7 - 17
INSULATION
p. 25 - 35
MULTIFUNCTIONS
p. 39 - 51
SEMI-CONDUCTOR SCREEN
p.19 – 23
MULTIFUNCTIONS
p. 39 - 51
8/16/2019 Alroc Preparation Tools
7/57
Edition - July 2012
7
OUTER JACKET
8/16/2019 Alroc Preparation Tools
8/57
Edition - July 2012
8
Semi-conductor on jacket
Reinforced jacket
removal tool with sound
alarm
Jacket removal tool with
sound alarm
Basic jacket removal tool
DMSR 40-90
DMSR 80-160
DM 25-60-DC
DM 30-60
AUG5/60-160
DM 95-145
DMS 95-145
DM 50-95
DMS 50-95
Product range overview
EGA / EVP / EV HTB / CAS
OptionalUsed with
BMFD 50-160
8/16/2019 Alroc Preparation Tools
9/57
Edition - July 2012
9
Edition 02/ 2010 /A0 – Illustrations non contractuelles
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – Outer Jacket
DMSR
DM
S
RIncorporated detection system
rolls on an adhesive aluminium tape
New steel reinforcedposition indicator for
circular & longitudinal cut
8/16/2019 Alroc Preparation Tools
10/57
Edition - July 2012
10
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – Outer Jacket
DMSR
DM
S
R
FUNCTIONS CHARACTERISTICS
The DMSR 40/90 is specially
designed to remove the HDPE
outer sheath also lead sheath ofevery thickness on high voltage
cables. The DMS/R is very solid to
remove heavy outer sheath. A
comparator allow a precise
cutting of the alu or lead. .sheath.
Removes the outer jacket
Change of longitudinal to circularcutting without loosing tool from
the cable.
Comparator for a precise cutting
L : 370 mm Weight : 7.7kg
l : 155 mm
Edition 02/ 2008 /A0 – Illustrations non contractuelles
Réf :Cable diameter
capacity
Max cutting
depth
DimensionWeight
DMSR/40-90 40 - 90mm 11mm 370 x 155mm 7,7kg
DMSR/80-160 80 - 160mm 11mm 400 x 160mm 10,5kg
8/16/2019 Alroc Preparation Tools
11/57
Edition - July 2012
11
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – Outer Jacket
EGA
EG
A
FUNCTIONS CHARACTERISTICS
EGA tool allows to spread and to
remove the outer sheath from HV
cables after realization of
longitudinal and circular cut.
Outer sheath spreading from HV cables.
Note : for more facility, spread the
outer sheath using a pair of EGA.
L : 430 mm Weight : 1,2 kg
l : 120 mm
H : 40 mm
Edition 02/ 2010 /A2 – Illustrations non contractuelles
*
8/16/2019 Alroc Preparation Tools
12/57
Edition - July 2012
12
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
www.alroc.fr
HV – Lead Outer Jacket
EVP EV HTB
EV
FUNCTIONS CHARACTERISTICS
EVP and EV-HTB spreaders
facilitate the lead spreading inregards to the semi-conductive
sheet.
Lead sheath spreading
EVP for LV and MV cables
EV-HTB for HV cables
Edition 10/ 2005 /A4 – Illustrations non contractuelles
8/16/2019 Alroc Preparation Tools
13/57
Edition - July 2012
13
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – Outer Jacket
CAS
CA
S
FUNCTIONS CHARACTERISTICS
The key strap CAS can handle HV
cables without damaging them.
Handling cables
Edition 02/ 2008 /A0 – Illustrations non contractuelles
Ref : Width of strapLenght of the
handleWeight
CAS/1 75 mm 450 mm 3 kg
CAS/2 150 mm 600 mm 4.5 kg
8/16/2019 Alroc Preparation Tools
14/57
Edition - July 2012
14
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – Outer Jacket
DM25-60-DC
D
M25-
60-
DC
FUNCTIONS CHARACTERISTICS
The DM25/60 tool is designed to
realize a longitudinal cut to
remove HDPE outer jackets aswell as lead sheath.
Application example : Outer
sheath control on drum in
factory.
Circular and longitudinal cutting on
cable's outer sheath.
Sold in plastic caseCapacity : Ø25 - 60mm
maximum cutting depth: 7mm
L : 500 mm Weight: 6.7kg
l : 300 mm
H : 220 mm
Edition 07/ 2009 /A0 – Illustrations non contractuelles
8/16/2019 Alroc Preparation Tools
15/57
Edition - July 2012
15
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – Outer Jacket
DM
D
M
FUNCTIONS CHARACTERISTICS
The DM is designed to remove
PEHD or lead o of variable
thickness from high voltage
cables.
Removes outer sheath from high
voltage cables
Supplied with plastic case
Edition 12/ 2008 /A0 – Illustrations non contractuelles
Cable diameter Max thickness Ref : Weight
30 - 60 mm 7 mm DM 30-60 4.1 kg
50 - 95 mm 7 mm DM 50-95 4.3 kg
95 - 145 mm 11 mm DM 95-145 5.0 kg
8/16/2019 Alroc Preparation Tools
16/57
Edition - July 2012
16
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – Outer Jacket
DMS
D
M
S
FUNCTIONS CHARACTERISTICS
The DMS is designed to remove
polyethylene jackets of variable
thickness from high voltage cables.
The incorporated sound alarm
system warns when the blade is in
contact with the lead/ aluminium
shield.
Removes outer sheath from high
voltage cables
Audible sound indication when
metallic shield is reached
Supplied with plastic case
Edition 01/ 2006 /A4 – Illustrations non contractuelles
Cable diameter Max thickness Ref : Weight
50 - 95 mm 7 mm DMS 50-95 4 kg
95 - 145 mm 11 mm DMS 95-145 5 kg
8/16/2019 Alroc Preparation Tools
17/57
Edition - July 2012
17
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – Outer Jacket
AUG5/60-160
A
U
G
5
/
60-160
FUNCTIONS CHARACTERISTICS
The AUG5/60-160 tool can be
used for peeling the bonded
semi-conductor for cable
preparations.
Removing outer sheath
Minimal peeling thickness: 2mm
Capacity: 60 - 160mm Ø
L : 640 mm Weight : 8.6 kg
l : 226 mm
H : 113 mm
Edition 02/ 2010 /A3 – Illustrations non contractuelles
8/16/2019 Alroc Preparation Tools
18/57
Edition - July 2012
18
8/16/2019 Alroc Preparation Tools
19/57
Edition - July 2012
19
SEMI-CONDUCTOR
SCREEN
8/16/2019 Alroc Preparation Tools
20/57
Edition - July 2012
20
Used with
BMFD 50-160
ASR/ 35-75
ASR/ 70-110
ASR/ 100-160
Restores cylindrical
shape
ASR/F 35-75
ASR/F 70-110
ASR/F 100-160Restores cylindrical
shape with superior
finishing
Old generation
LHS2/38-60 LHS3/60-80 LHS4/80-110
LHS5/
100-140
Product range overview
8/16/2019 Alroc Preparation Tools
21/57
Edition - July 2012
21
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
www.alroc.fr
HV – BONDED SEMI-CONDUCTOR
LHS
LH
S
FUNCTIONS CHARACTERISTICS
LH tools remove Bonded semi-
conductor leaving a correctfinishing on the insulation.
Bonded semi-conductor screen removal
Edition 10/ 2005 /A3 – Illustrations non contractuelles
Semi-conductor diameter Ref : Weight
38 - 60 mm LHS2 2 kg
60 - 80 mm LHS3 3 kg
80 - 110 mm LHS4 4,5 kg
100 - 140 mm LHS5 6,5 kg
8/16/2019 Alroc Preparation Tools
22/57
Edition - July 2012
22
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – BONDED SEMI-CONDUCTOR
ASR
A
S
R
FUNCTIONS CHARACTERISTICS
The ASR tool allows to remove the
bonded semi-conductor withoutdamaging the insulation layer,
especially suited when the cable is not
perfectly cylindrical.
Removes the bonded semi-
conductor screen
Reshape cable to a cylindrical
form on the insulation
Diameter on the
semi-conductor screenRef : Weight
35 - 75 mm ASR/35-75 3 kg
70 - 110 mm ASR/70-110 4,6 kg
100 - 160 mm ASR/100-160 9,8 kg
Edition 09/ 2006 /A4 – Illustrations non contractuelles
ASR/100-160
ASR/70-110
ASR/35-75
8/16/2019 Alroc Preparation Tools
23/57
Edition - July 2012
23
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – BONDED SEMI-CONDUCTOR
ASR/F
A
S
R
/F
FUNCTIONS CHARACTERISTICS
The ASR tool allows to remove
the bonded semi-conductorwithout damaging the insulation
layer, especially suited when the
cable is not perfectly cylindrical.
In addition to the above, the
finition is superior to the ASR
tool.
Removes the bonded semi-conductor
screenReshape cable to a cylindrical form
on the insulation
Cone preparation on the bonded
semi-conductor
Clean surface finish on the insulation
Important reduction time through
reduced sanding on the insulation
Diameter on the semi-conductor screen Ref : Weight
35 - 75 mm ASR/F35-75 3,3 kg70 - 110 mm ASR/F70-110 4,8 kg
100 - 160 mm ASR/F100-160 10 kg
α = 10° ~20mm
8/16/2019 Alroc Preparation Tools
24/57
Edition - July 2012
24
8/16/2019 Alroc Preparation Tools
25/57
Edition - July 2012
25
INSULATION
8/16/2019 Alroc Preparation Tools
26/57
Edition - July 2012
26
LH2/
38-60
LH3/
60-80
Used with
(except C/PP)
BMFD 50-160
LH4/
80-110
LH5/
100-140
Old generation
Product range overview
8/16/2019 Alroc Preparation Tools
27/57
Edition - July 2012
27
Edition 10/ 2005 /A4 – Illustrations non contractuelles
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – BONDED SEMI-CONDUCTOR
LH
L
H
FUNCTIONS CHARACTERISTICS
LH tools remove insulation from
HTB cables.
Insulation removal
Cable diameter Ref : Weight
38 - 60 mm LH2 2 kg
60 - 80 mm LH3 3 kg
80 - 110 mm LH4 5,9 kg
100 - 140 mm LH5 8,5 kg
8/16/2019 Alroc Preparation Tools
28/57
Edition - July 2012
28
8/16/2019 Alroc Preparation Tools
29/57
Edition - July 2012
29
E
CHANNEL & CONES
ON INSULATION
8/16/2019 Alroc Preparation Tools
30/57
Edition - July 2012
30
Finishing of the cone
Cone NO SILICONE
LHP2/38-60
LHP4/60-110
LHP5/
100-140Channel
(used with cable
clam
CHN-NS-50-110
Channel (NO SILICONE)
(used without cable
clam
LHP5/50-140-NS
CHN-NS-100-160
TC (all sizes possible, one TC per cable configuration)
BMFD 50-160
Used with :
(except for TC +
LHP5/50-140-NS)
Product range overview
8/16/2019 Alroc Preparation Tools
31/57
Edition - July 2012
31
Edition 03/ 2011 /A1 – Illustrations non contractuelles
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV - INSULATION
CHN - NS
C
HN
-
NS
FUNCTIONS CHARACTERISTICS
LHC-NS tools allow to perform a
straight cutting or tapers on cable
insulation.
Use of tool without lubrication.
Taper realization on cable
insulation
Supplied with cable clamp
Delivered in plastic case
Cable diameter Ref : Weight
50 - 110 mm CHN4/60-110-NS 7.6 kg
100 - 160 mm CHN5/100-160-NS 13.3 kg
8/16/2019 Alroc Preparation Tools
32/57
Edition - July 2012
32
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
www.alroc.fr
HV - INSULATION
TC
T
C
FUNCTIONS CHARACTERISTICS
ALROC-TC tools taper the
insulation
TC tool is calibrated per cable section
Standard taper length : 30 to 40 mm
Ask for special taper lengths : 65
mm,95 mm,120 mm
Edition 04 / 2012 /A5 – Illustrations non contractuelles
* Lg
* Lenght of cone
Tension Conductor section Cone lenght
6 / 10 kV 10² - 240²
30 - 40mm8.7 / 15 kV 25² - 630²
12 / 20 kV 25² - 630²
18 / 30 kv 36 kv
And above
50² - 1300²
Consult us
40 – 65 – 95 –
120mm
* Sections are given for illustrative purposes for cable tensions of 12 and 20kV
Cones are customized
8/16/2019 Alroc Preparation Tools
33/57
Edition - July 2012
33
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV - INSULATION
LHP
LH
P
FUNCTIONS CHARACTERISTICS
The LHP tool allows to
remove a part of theinsulation and the semi-
conductor to make a channel
or a groove form.
Realization of a groove in the insulation.
Various blades add-ons can be mounted to
realize any groove or channel shape.
Requires a cable clamp to be operated (sold
separately).
Edition 09/ 2006 /A6 – Illustrations non contractuelles
Cable diameter on insulation Ref : Weight
38 - 60 mm LHP2 2,7 kg
60 - 110 mm LHP4 4,5 kg
100 - 160 mm LHP5 10,5 kg
Blades add-ons and blocks are sold separately
8/16/2019 Alroc Preparation Tools
34/57
Edition - July 2012
34
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV - INSULATION
LHP5 NS
LH
P
5
-NS
FUNCTIONS CHARACTERISTICS
The LHP5/50-140-NS tool allows
to remove a part of the insulation
and the semi-conductor to makea channel or a groove form.
This tool is used without
lubrication.
Realization of a groove in the insulation.
Unlike the standard LHP tool, the LHP5NS does not require a cable clamp to be
operated.
Delivered in plastic case.
Capacity : Ø50 - 160mm
L : 610 mm Weight : 10.1 kg
l : 226 mm
H : 122 mm
Edition 04/ 2011 /A0 – Illustrations non contractuelles
Blades add-ons are sold separately
8/16/2019 Alroc Preparation Tools
35/57
Edition - July 2012
35
Edition 09/ 2008 /A1 – Illustrations non contractuelles
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
www.alroc.fr
HV - INSULATION
Choix des lames pour LHP
LH
P
L
FUNCTIONS CHARACTERISTICS
LHPL add-on blades are fitted
on ALROC tools referenced
LHP to perform a channel or a
groove form on the insulation
of HV cables.
Realization of a channel on the insulation
All groove forms and profiles upon
request.
Tool Tool capacity Reference
LHP2 Ø38 - 60 mm LHPL2-…
LHP4 Ø60 -110 mm LHPL4-…
LHP5 Ø100 - 160 mm LHPL5-…
LHP5 NS Ø50 - 140 mm LHPL5 NS -…
Blades add-ons and blocks are sold separately.
8/16/2019 Alroc Preparation Tools
36/57
Edition - July 2012
36
HV - INSULATION
Choix des lames pour LHP
Edition 09/2008 /A1 – Illustrations non contractuelles Page 2/3
ALROC S.A.S – ZI de la Fonderie – 72160 TUFFE – FRANCE – Tél : 02.43.71.11.80 – Fax : 02.43.71.16.51Internet :www.alroc.fr – Email :[email protected] –
S.A.S au capital de 800000€ – 341 050 987 RCS LE MANS – SIRET 341 050 987 00013 – APE 2453Z – TVA/FR 77 341 050 987
1- Blade for single groove
2- Blade for shouldered groove
The tools must be used when the cable is out of tension by skilled workers who arecompetent in cable preparation and know about electrical phenomenons.
Wearing anti-cut gloves is obligatory.Clean the tools after each utilization.
Blade reference For tool :
A (mm) LHP2
B maxi = 21LHP4
B maxi = 30LHP5
B maxi = 35
5 LHPL2-5 LHPL4-5 LHPL5-5
10 LHPL2-10 LHPL4-10 LHPL5-10
15 (14 for LHP2) LHPL2-14 LHPL4-15 LHPL5-15
20 LHPL4-20 LHPL5-20
25 LHPL4-25 LHPL5-25
Other dimensions upon request
Bladereference
A B C maxi D maxi For tool
LHPL2-SP5 2.5 3 11 15 LHP2
LHPL2-SP6 4 4 9.5 15 LHP2
LHPL4-SP6 10 3 13 30 LHP4
LHPL4-SP10 7 4.5 15 13 LHP4
LHPL4-SP11 7 5 15 13 LHP4
LHPL4-SP12 6 4 14.5 16 LHP4
LHPL4-SP14 4 4 20.5 16 LHP4
LHPL5-SP4 6 4 14.5 16 LHP5
LHPL5-SP5 4 4 20.5 16 LHP5
All other dimensions upon request
A
C
D
B
8/16/2019 Alroc Preparation Tools
37/57
Edition - July 2012
37
HV - INSULATION
Choix des lames pour LHP
Edition 09/2008 /A1 – Illustrations non contractuelles page 3/3
ALROC S.A.S – ZI de la Fonderie – 72160 TUFFE – FRANCE – Tél : 02.43.71.11.80 – Fax : 02.43.71.16.51Internet :www.alroc.fr – Email :[email protected] –
S.A.S au capital de 800000€ – 341 050 987 RCS LE MANS – SIRET 341 050 987 00013 – APE 2453Z – TVA/FR 77 341 050 987
The tools must be used when the cable is out of tension by skilled workers who arecompetent in cable preparation and know about electrical phenomenons.
Wearing anti-cut gloves is obligatory.Clean the tools after each utilization.
Bladereference
A B C maxi D E For tool :
LHPL2-SP3 2.7 3 6.25 7 4 LHP2
LHPL2-SP4 4 3 5.6 5 2 LHP2
LHPL4-SP2 4 4 14.5 10 4 LHP4
LHPL4-SP3 6 4 14.5 10 4 LHP4
LHPL4-SP5 5.25 10 16.75 18.5 3 LHP4
LHPL5-SP2 4 4 14.5 10 4 LHP5
LHPL5-SP3 6 4 14.5 10 4 LHP5
All other dimensions upon request
3- Blade for shouldered groove with chamfer
4- Blade for shouldered groove with radius
Bladereference
A B C maxi D E For tool :
LHPL2-SP1 2.7 3 8.3 8.75 2.5 LHP2
LHPL4-SP7 8.25 5.5 13.75 13 3 LHP4
LHPL5-SP1 10 5 12 16.1 3 LHP5
Radius of 1.5mm in the back of the groove A except for theblade LHPL2-SP1 with sharp edges
All other dimensions upon request
We fabricate all types of blades upon request.
Please send us a drawing with the desired result
8/16/2019 Alroc Preparation Tools
38/57
Edition - July 2012
38
8/16/2019 Alroc Preparation Tools
39/57
Edition - July 2012
39
MULTIFUNCTIONS(SEMI-CONDUCTOR SCREEN +
INSULATION)
8/16/2019 Alroc Preparation Tools
40/57
Edition - July 2012
40
Semi-conductor + insulation ASI/ 40-80
CAMF5/55-160 NS
CMF5/100-160 NS
CMF4/60-110 NS
GRI-RTE
Used with
(except GRI-RTE)
BMFD 50-160
Interchangeable Blade add-on
SUPER FINITION + NO SILICONE
(Semi-conductor + insulation +
chamfer
Scrappers
Product range overview
Interchangeable Blade add-on
NO SILICONE
(Semi-conductor + insulation +
chamfer
8/16/2019 Alroc Preparation Tools
41/57
Edition - July 2012
41
Edition 09/ 2011 /A1 – Illustrations non contractuelles
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
www.alroc.fr
HV – MULTIFUNCTIONS
CAMF5/55-160-NS
C
A
MF5
/
55-160
NSFUNCTIONS CHARACTERISTICS
The CAMF5/55-160-NS tool removes
the semiconductor while leaving a very
clean surface on the insulation, inaddition to striping the insulation layer
As a multi-function tool, additional
add-ons allows it to also perform:
- Chamfer on the insulation- Grooves on the insulation- Increased conical outline on the
bonded semi-conductor screen
This tool does not require silicone to
be operated.
Covers cable diameter ranging from
55 to 160mm
Removal of bonded semiconductor,leaving a conical outline
Very clean surface finish
Reversible blade
Removal of insulation
Supplied in plastic case
Substantial reduction for time
previously needed to sand the
insulation
L: 700 mm Weight : 9.5kg
l : 255 mm
H : 180 mm
K7/INS
K7/FNS
8/16/2019 Alroc Preparation Tools
42/57
Edition - July 2012
42
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – MULTIFUNCTIONS
CMF4/60-110-NS CMF5/100-160-NS
CM
F
-
NS
FUNCTIONS CHARACTERISTICS
CMF* NS tool case allows to
remove the bonded semi-
conductor and the insulation. It
also allows to perform a channel
on the insulation from HV cables.
This tool does not require silicone to
be operated.
Bonded semi-conductor removal
Insulation removal
Channel realization in the insulation
Semi-conductor removal with a very
clean surface and a sketch of cone
Edition 01/ 2011 /A0 – Illustrations non contractuelles
Cable diameter Ref : Weight
60 - 110 mm CMF4/60-110-NS 5,6 kg
100 - 160 mm CMF5/100-160-NS 11,4 kg
K7/ISOLANT-NS K7/SEMI-NP-NS
Optional
blade add-on:
8/16/2019 Alroc Preparation Tools
43/57
Edition - July 2012
43
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
www.alroc.fr
HV – MULTIFUNCTIONS
K7/FSC (pour MF4/60-110-NS et MF5/100-160-NS)
K
7/
F
SC
FUNCTIONS CHARACTERISTICS
K7/FSC is specially designed toremove bonded semi-conductor
from cables by performing a
taper/ cone on the semi-
conductor screen while keeping a
very clean surface on the
insulation
K7/FSC can be installed on
MF4/60-110 and MF5/100-160
tools.
Bonded semi-conductor removal
Performs a taper/ cone on the bonded
semi-conductor
Very clean surface on insulation
Substantial reduction of time sanding
Compatible with MF4/60-110 or
MF5/100-160 tools.
Edition 11/ 2006 /A0 – Illustrations non contractuelles
8/16/2019 Alroc Preparation Tools
44/57
Edition - July 2012
44
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
www.alroc.fr
HV – MULTIFUNCTIONS
ASI/40-80
A
SI
/
40-80
FUNCTIONS CHARACTERISTICS
The ASI/40-80 tool allows to strip
the bonded semi-conductor and
to remove the insulation.
Bonded semi-conductor stripping.
Insulation removal
Capacity : Ø40 à 80mm
Option : BMF thrust allows to perform a
perfect and clean stop on the insulation
or on the bonded semi-conductor.
L : 420 mm Poids : 3250g
l : 130 mm
H : 100 mm
Edition 05/ 2007 /A1 – Illustrations non contractuelles
8/16/2019 Alroc Preparation Tools
45/57
Edition - July 2012
45
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
www.alroc.fr
HV – MULTIFUNCTIONS
GRI-RTE
G
R
I-
R
TE
FUNCTIONS CHARACTERISTICS
GRI scraper allows to remove the
outer bonded semi-conductor
screen’s residuals left on thecable insulation
Scraping of the semi-conductor residual
Comes in it a plastic case
L : 250 mm Weight : 190g
l : 40 mm
H : 25 mm
Edition 11/ 2009 /A0 – Illustrations non contractuelles
8/16/2019 Alroc Preparation Tools
46/57
Edition - July 2012
46
8/16/2019 Alroc Preparation Tools
47/57
Edition - July 2012
47
MOTORIZED
MULTIFUNCTIONS(SEMI-CONDUCTOR SCREEN + INSULATION)
8/16/2019 Alroc Preparation Tools
48/57
Edition - July 2012
48
AML/20-50
Motorized, semi-conductor +
insulation
(toothed transmission belt)AML/50-95 AML/95-150
Motorized, semi-conductor +
insulation
(transmission using gears)
C/PP Electrically powered sanding
Product range overview
8/16/2019 Alroc Preparation Tools
49/57
Edition - July 2012
49
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – MULTIFUNCTIONS
AML
AM
L
FUNCTIONS CHARACTERISTICS
The AML machine
removes the bonded
semi-conductive
insulation shield and also
a fine layer of insulation if
required.
Bonded semi-conductor removal
Electrical powered tool
Distribution using gears for the AML 20-50 and
toothed belt for the 50-95 and the 95-150 AML.
Edition 02/ 2012 /A6 – Illustrations non contractuelles
Cable diameter Ref : Weight
20 - 50 mm AML 20-50 8,2 kg
50 - 95 mm AML 50-95 13,5 kg
95 - 150 mm AML 95-150 19,7 kg
AML 20-50
AML 50-95
AML 95-150
8/16/2019 Alroc Preparation Tools
50/57
Edition - July 2012
50
Edition 02/ 2010 /A1 – Illustrations non contractuelles
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – MULTIFUNCTIONS
K7i/
K7i/-
FUNCTIONS CHARACTERISTICS
K7i/1, K7i/2 and K7i/3 are
specially conceived to
remove the insulation usingAML machines.
Insulation removal
K7I/1 is installed on the AML20-50 toolK7I/2 is installed on the AML50-95 tool
K7I/3 is installed on the AML95-150 tool
Ref.
Stripping Thickness
min + max
AML 20-50 AML 50-95 AML 95-150
K7i/1 5 – 16 mm 6 – 17 mm 6 – 17 mm
K7i/2-15 Non compatible 2 – 15 mm 2 – 15 mm
K7i/2 Non compatible 11 – 24 mm 11 – 24 mmK7i/3 Non compatible Non compatible 16 – 34 mm
8/16/2019 Alroc Preparation Tools
51/57
Edition - July 2012
51
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
HV – MULTIFUNCTIONS
C/PP
C
/
P
P
FUNCTIONS CHARACTERISTICS
The ALROC portable sanding
machine is used to take out the
roughnesses on the cable after
using the ALROC tools LHS and
AML
Sandpaper the cables
Delivered in case with grease pomp
L : 505 mm
l : 360 mm
H : 120 mm
Weight : 5,5 kg
Case weight : 9.6kg
Edition 02/ 2012 /A3 – Illustrations non contractuelles
8/16/2019 Alroc Preparation Tools
52/57
Edition - July 2012
52
8/16/2019 Alroc Preparation Tools
53/57
Edition - July 2012
53
CABLE CLAMP
8/16/2019 Alroc Preparation Tools
54/57
Edition - July 2012
54
Z.I de lafonderie
72160 TufféFRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
www.alroc.fr
HV – MULTIFUNCTIONS
BMFD/50-160
B
M
F
D
/50-
160
Edition 03/ 2011 /A2 – Illustrations non contractuelles
FUNCTIONS CHARACTERISTICS
The BMFD/50-160 thrust has 3
clamping positions to cover a
wider range of cable diameters.
The BMFD/50-160 thrust is
reversible and designed for two
functions :
1. It is used as a stop for the tool
with its pads.
2. It serves as a running surface
of the ALROCONE rollers.
(Supplied with 2 sets of plates)
3 clamping positions
Is used with teh following tools
- AMF5/55-160-NS
- MF4/60-110-NS
- MF5/100-160-NS
- LHP4
- LHP5
- AUG5/60-160
- ASR/70-110
- ASR/100-160
- DMSR/80-160
- CHN4-60-110-NS
- CHN5-100-160-NS
Capacity : Ø50-160mmL : 345 mm Weight : 2.5 kg
l : 245 mm
H : 50 mm
8/16/2019 Alroc Preparation Tools
55/57
Edition - July 2012
55
AFTER SALES SERVICE
8/16/2019 Alroc Preparation Tools
56/57
Edition - July 2012
56
Z.I de la fonderie72160 Tuffé
FRANCE
Tel:+33 (0)2 43 71 11 80Fax:+33 (0)2 43 71 16 51
www.alroc.fr
Maintenance of ALROC cases
M
A I N T E N A
N C E
Actions Objectifs
Blade replacement
Wear plates installation
Re-calibration of all tools.
Exchange of worn parts.
Marking on the cases for follow
up maintenance tracability
Restore the state of the toolsto brand new
Ensures optimumperformance from the tools
Edition 03/ 2008 /A0 Illustrations non contractuelles
Before
After
8/16/2019 Alroc Preparation Tools
57/57
Edition - July 2012
TERMS OF SALES
1. DEMAND ACCEPTANCEOrr tenders aren’t valid that to acceptance by return letter. Engagements taken by our reps aren’t definitely valid after have been recording by our company. For unserviceable part, quantity of products delivered and invoiced could be superior of 10 per cent of the
quantity ordered.The annulment of order during execution or finishing don’t accepted.
2. PAYMENT STIPULATIONOrr payment stipulations get on with compensating payment to Mans.Orr invoices are payable to cash, without discount, except particular agreement between party.According to the law 92-1442 on December 31st 1990, in case of delay payment in comparison with the date ofpayment, penalty are due, they are calculated by using to minimum the equal rate once and half the legalinterest rate of civil year, preceding the date of invoice between the date of payment representing on theinvoice and the date of payment received.All delay or failure to pay or substantial changing in the situation of buyer at exacted a payment before all newexpeditions.
3. DELAY AND DELIVRINGDelay of delivering leave of day of acceptance of order, they are gave at indicative title and withoutguarantee. The delay of delivering can’t give place at reducing of price, any penalty or indemnity accordingprevious express acceptance and to written of our company, with reciprocity equal premium in case ofadvantage at the delivering, our company is freeing of all relative mortgaging at the delay of delivering in thecase of absolute necessity as: shore, fire, manufacture or set of tools accident, default of raw, stop of drivingforce, etc, these cases carry the suspension of delivering and extend the delay laid down.In case of defectiveness, our responsibility restrict oneself to the slight alteration of defective part or at theirpure and simple replacing in the shorter possible delay, without others consequences, any cost or indemnity.The complaints must be in by the latter, six day after receipt of goods. After this delay, our company doesn’tadmit it.
4. TRANSFER OF RISKS
Whatever the mode of expedition, our goods exclusively travel at one’s own risk of customer part. All ourexpedition are famous according made at the order of buyer and to his account, except contrary expresslyformulated willing.It will belong buyer to make firm the goods sold from their exit of our factory and this until the date of transferof property against all risks of damage of destruction or of responsibility caused or suffered by them.
5. CLAUSE OF SHARE OF PROPERTYAccording to the law 80-335 on May 12th 1980, the transfer of property of our products is suspended untilentire payment of their price in principal and accessory same in case of concession of delay of payment. Theapplication of this clause wouldn’t, in anyone case, to modify the application of conditions concerning thetransfer of risks. Don’t constitute a payment the discount of bill accepted or other titles creating an obligationto pay. Buyer wills became proprietor at the moment of payment effectively credited at our bank, of the lastmaturity, with accessory cost. In consequence, in case of partial or total no-payment of price at the maturity
for any cause whatever, our company could be required from full right and without formality the restitution ofproducts sold at the cost, one’s own risk of buyer.
6. JURISDICTION ASSIGNINGIn case of contesting or litigation of any mature whatever, the trade tribunal of LE MANS will be onlycompetent, same in case of appeal in guarantee or of plurality of defendant.The present sale general stipulation to apply oneself to all orders recorded by our company to the exclusion ofall clause representing on the letters and bill of order from our customer except express and writtenacceptance by our care.