Date post: | 14-Jan-2016 |
Category: |
Documents |
Upload: | christal-riley |
View: | 218 times |
Download: | 2 times |
Altistart 22Bypass the stresses and let your applications
take the strain
Soft start/soft stop units for
infrastructure and industrial applications
Schneider Electric – Industry – Sept.2009 2
Focus on savings and safety in your installations
Altistart 22● Reduces your operating
costs
● Simplifies wiring
● Protects your electrical installation
● Saves space with a fully equipped product
● Integrates bypass and protection functions
Up to 50% reduction in wiring time
Schneider Electric – Industry – Sept.2009 3
Altistart 22, prioritises efficiency
Clear display: - 4-digit display- 4 light emitting diodes (LEDs)
Easy programming: 4 navigation keys
Controls, display and marking on the front panel
Simplified wiring: 6 connections instead of 12
Schneider Electric – Industry – Sept.2009 4
Schneider Electric – Industry – Sept.2009 5
Main applications
●Pumps●Fans●CompressorsPlus other applications requiring smooth
starting and stopping
Schneider Electric – Industry – Sept.2009 6
Altistart 22: Installation and operation couldn't be simpler● Reduced wiring time (6 connections
instead of 12)
● Optimum enclosure sizes (Altistart 22 is very compact)
● Temperature rises kept to a minimum (low heat dissipation)
● Fewer components to manage (multifunction product)
● Simple setup and operation with:- 4 light emitting diodes (LEDs)
- 4 navigation keys
- 4 x 7 segment display
- Remote display terminal
- SoMove setup software (common to the Altivar, Lexium and TeSys ranges)
Schneider Electric – Industry – Sept.2009 7
Altistart 22: Protects installations
● Minimises jolts and shocks on your machines
● Reduces mechanical stresses
● Increases the service life of your installations
● Prevents installation failure by detecting and signalling faults such as a blocked motor, underload or incorrect earthing of one of the 3 motor phases
Schneider Electric – Industry – Sept.2009 8
A safe product with numerous integrated functions● Bypass and protection functions
● Protection functions for monitoring the motor, the electrical installation and the starter itself
● Coated cards as standard for enhanced resistance to harsh environments
3 Phase Control
Schneider Electric – Industry – Sept.2009 9
Emphasis on international compatibility
●Standards IEC/EN 60947-4-2
●CertificationsCSA, CE, CCC, UL, Gost, ctick...
●Environment● EMC class A
● Pollution degree 2
● Temperature: -10 to 40° in nominal operation
Schneider Electric – Industry – Sept.2009 10
Thank you! Make the most of your energy