Date post: | 19-May-2015 |
Category: |
Technology |
Upload: | hoang-tien |
View: | 1,505 times |
Download: | 2 times |
PROPERTIES-Density-Corrosion Resistance -Electrical and Thermal Conductivity -Light and Heat Reflectivity - Ductility
The density of aluminiumThe density of aluminium is 2,7
g/cm3 ,around one third that of steel. Used advantageously in applications
where high strength and low weight are required.
=>> Greater in load capacity and reduced fuel consumption.
Corrosion Resistance of Aluminium
-When the surface of a luminium metal is exposed to air, a protective oxide coating forms almost instantaneously.-If the oxide becomes scratched and aluminium metal exposed, more oxide is formed and the protected layer renewed.
-This oxide layer is corrosion resistant and can be further enhanced with surface treatments such as anodising.
Electrical and Thermal Conductivity of Aluminium
Thermal Conductivity : 202.4 W/mK
Resistivity: 2,82×10−8 Ωm
The great advantage of a luminium is that by weight, the conductivity of a luminium is around twice that of copper.=>> Aluminium is an excellent conductor of both heat and electricity.
Light and Heat Reflectivity of Aluminium-Aluminium is a good reflector of
both visible light and heat
-Reflectivity : High 71% unpolished and when polished: 97% => Aluminium is extremely reflective, when polished (some sources say) it is the most reflective material, for this reason it is now frequently used in lights.
-Electrical Resistivity : Low 2.65 x 10 -8 Ohm metres=> Aluminium has slow electrical resistivity and therefore has high electrical conductivity
High ductility- Aluminium is easy when plastic
deformation , spinning, wire and rolled into sheets,foil, tape, film (foil), pressed into bars flowing with the contour length (profile) complex very different issue.
=>> Summary: Aluminium has a unique set of properties that make it so essential to the modern world. It is ductile , strong (in alloys), lightweight, highly conductive, and extremely reflective.
APPLICATION AND USE OF ALUMINIUM
Electrical ConductorsMaterial of construction for Transport
PackagingBuilding and ArchitectureFoilsMiscellaneous Applications
Electrical Conductors- Aluminium alloys have a conductivity averaging 62% of the International Annealed Copper Standard (IACS) but, because of its density, it can carry more than twice as much electricity as an equivalent weight of copper.
- A very large proportion of overhead, high voltage, power lines utilise aluminium rather than copper as the conductor on weight grounds.
Material of construction for Transport
-The transport and automotive industry is the fastest-growing market segment for aluminium suppliers.
-Various alloys of aluminium are now also used in passenger and freight rail cars, commercial vehicles, military vehicles, ships & boats, buses & coaches, bicycles and increasingly in motor cars.
Packaging
-The successful use of the 1000 series alloys as foil for food wrapping and for containers utilises their good corrosion resistance and barrier properties against UV light, moisture and odour.
-The most significant use of aluminium in packaging has been in the production of beverage cans which incorporate the easy open ring pull' in the lid.
Building and Architecture
Shaped aluminum Nhôm kính nội thất
Loose aluminium foil, or aluminium sheets + ribbion = “Hotel Marques de Riscal”..
FoilsAluminium is produced in
commercial foils as thin as 0.0065 mm (or 6.5 µm). Material thicker than 0.2mm is called sheet or strip.
Light aluminum foil
Miscellaneous Applications of Aluminium
Road barrier lithographic printing plates
SUMMARYAluminium is the world's most abundant
metal and verry important in our life.By utilising various combinations of its
advantageous properties such as strength, lightness, corrosion resistance, recyclability and formability, a luminiu m is being employed in an ever-increasing number of applications.
THANKS FOR YOUR LISTENING