Aluminium RMD Australia Beams - Yellow Pages

RMD AustraliaAluminium

Beams

PRODUCT BROCHURE

Alform Beam on Super Slim

Product OverviewAluminium Beams combine the benefits of strength, lightness and the ease of handling with consistency, versatility and exceptional durability. With an exceptional range of accessories, the beams form a complete system that can be used for virtually unlimited configurations and applications.

FasterAluminium Beams are always straight, simplifying and speeding up assembly.

They have a consistent cross-section, eliminating time and cost implications of selecting and hand-finishing timber.

EasierAluminium Beams are lighter and easier to handle than timber, their unique profiles reduce damage. Alform Beams bevelled edges enable plywood sheeting to be stripped quickly and easily.

Aluminium Beams can be re-used a number of times. When they finally reach the end of their useful life, their residual value is still around 25% of their original cost.

SafeThey offer greatly increased bending and sheer resistance than timber, which means they are safer. They also allow more weight to be to be supported over greater spans with less equipment, saving time and costs.

Pluto LNG Project Boddington Gold Mine

Aluminium Beams Versatile, lightweight and durable beams.PRODUCT BROCHURE

1

Features and BenefitsRMD Australia has two innovative aluminium beams: Alform Beam and Albeam. They are both versatile, lightweight and durable beams with an extensive range of accessories.

Strength-to-weight ratioFar lighter and easier to handle than comparable timber beams.

Unique profiles reduce damageAlform Beam has bevelled edges, allowing plywood sheeting to be stripped quickly and easily.

Increased bending and shear resistanceAllows more weight to be supported across greater spans with less equipment, saving time and costs.

UniformityUnlike timber, aluminium beams are always straight, simplifying and speeding up assembly.

Consistent cross-sectionEliminates time and cost implications of selecting and hand-finishing timber.

Longevity and durabilityAluminium beams can be re-used a number of times and have a much longer life than timber beams.

Residual valueEven at the end of their practical, usable life, RMD's aluminium beams retain around 25% of their original cost.


2

ApplicationsRMD Australia's Albeam, and Alform Beam form a complete system capable of virtually unlimited configurations and applications including:

Column formwork

Crane set wall formwork

Circular wall formwork

Climbing wall formwork

Slab soffit formwork


3

Boddington Gold Mine

In DetailPerfect PartnerUsed along with Superslim Soldiers to assemble large wall formwork panels.

Ease of UseComplex configurations are also easily constructed.

Cost ReductionConstruction using aluminium ensures consistent alignment, accuracy and structural integrity, reducing wastage, assembly time and labour costs.

Unique IntegrationA unique wedge clamp allows primary and secondary beams to be fixed together at right-angles in soffit support applications.

Less Equipment NeededThe high bending and shear resistance of the 150mm Alform beam - twice that of a 200mm deep timber beam - allows longer spans, supporting greater loads, to be built with less equipment.

Lighter, Quicker, Easier60% lighter than timber equivalent, so its easier and quicker to handle, saving time and costs.


4

ProjectsM6 Guardsmill Traveller Solution

Europe

Rail

Hitchin Viaduct

Europe

Bridges, Rail

Barangaroo, Darling Harbour, Sydney

Australia & New Zealand

Mining, Stadiums, Utilities


5

Components

Alform Beam is 150mm deep, its been designed for wall formwork and slab support applications. They can be used in conjunction with RMD's Super Slim Soldiers to assemble large wall formwork panels. Alform's aluminium construction ensures its lighter than timber, has a consistent alignment, accuracy and structural integrity, reducing wastage, assembly time and labour costs.

Code Description Weight

AFA10900 Beam Alform 0.9m 5.0kg


AFX11200 Beam Alform 1.2m 6.7kg






















Aluminium Beams - Alform

Albeams provide increased bending and shear resistance, allowing more weight to be supported across greater spans with less equipment, saving time and costs.


ABX11800 Beam Albeam 1.8m 14.7kg







Aluminium Beams - Albeam


6

Components


AFX20007 Alform Internal Corner 1.3kg

AFX20002 Alignment Angle 2.1kg

Alform Internal Corner


AFX20008 Alform Internal Splice 2.2kg

AFX20019 Alform Internal Splice Clamp Plate 0.9kg

AFA10015 Serrated Double Nut 0.10kg

Alform Internal Splice Unit


AFX20015 Alform Universal Clip 0.1kg

AFX20022 Unifix Bolt 0.04kg

Alform Universal Clip


ALX10002 Alform Wedge Clamp 0.55kg

Alform Wedge Clamp


BNU16001 Nut - M16 Hex Plated 0.03kg

AFX20022 Bolt - M12 Unifix 0.05kg

BNU12001 Nut - M12 Hex Plated 0.01kg

BNU12004 Wing Nut - M12 Plated 0.01kg

Aluminium Beam Nuts and Bolts


7

ServicesOur service sets RMD Australia apart...

With over 60 years of experience in the construction industry RMD Australia understand the many and varied challenges that our customers face, whatever the size of your project. Whilst our product range provides us with the capability of supporting your project, it is our people that will make the difference.

Sales SupportThe Sales Team support you throughout the project, they have the knowledge to advise effective solutions based on RMD's safe and productive products to reduce costs.

Engineered DrawingsEngineering is based in each Region and at RMD's Head Office. They provide detailed drawings that clearly show the most efficient and safest way that the project should be undertaken.

Customer ServiceRMD provide a wide range of customer services to suit your special requirements, from training to the support items that you may require.

Technical ExpertiseEvery project, large or small, requires a unique design. Our highly skilled team of Engineers will firstly gain a thorough understanding of your specific requirements, and then provide a solution designed to more than meet them in terms of speed and accuracy. With a view to cost effectiveness.

SafetyRMD Australia prides itself on the inherent safety of our product range and the solutions that we design. Safety is a major criteria for all of our personnel including our dedicated Sales Team.


8

ContactsRMD AUSTRALIAHEAD OFFICEPO Box 169, 66 Bennet Avenue, Melrose Park, SA 5039Tel: +61 (08) 8179 8200Fax: +61 (08) 8179 8201Email: [email protected]

ADELAIDEPO Box 169, 66 Bennet Avenue, Melrose Park, SA 5039Tel: +61 (08) 8179 8240Fax: +61 (08) 8179 8241Email: [email protected]

BRISBANE163 Crockford Street, Northgate, QLD 4013 (PO Box 55, Nundah, QLD 4012)Tel: +61 (07) 3634 2700Fax: +61 (07) 3266 1054Email: [email protected]

CAIRNSPO Box 399, 78 - 80 Ishmael Road, Earlville, QLD 4870Tel: +61 (07) 4054 5149Fax: +61 (07) 4054 5198Email: [email protected]

DARWIN3/32 Bishop Street, Stuart Park, NT 0820 (PO Box 37639 Winnellie, NT 0821)Tel: +61 (08) 8941 6777Fax: +61 (08) 8942 2577Email: [email protected]

HOBART5 Lampton Avenue, Derwent Park, TAS 7009 (PO Box 246, Moonah, TAS 7009)Tel: +61 (03) 6272 2566 or +61 (03) 6272 5073Fax: +61 (03) 6272 2611Email: [email protected]

LAUNCESTON9 Churchill Park Drive, Ivernay, TAS 7248 (PO Box 739, Launceston, TAS 7250)Tel: +61 (03) 6331 3751 or +61 (03) 6334 2566Fax: +61 (03) 6331 9751Email: [email protected]

MACKAYBlock 8D, Graeme Heggie Street, Mackay, QLD 4740Tel: +61 (07) 4955 1228 / +61 (07)4955 1844Fax: +61 (07) 4955 3052Email: [email protected]

MAROOCHYDORE32 Page Street, Kunda, QLD 4556 (PO Box 584, Maroochydore, QLD 4558)Tel: +61 (07) 5445 3244Fax: +61 (07) 5445 4822Email: [email protected]

MELBOURNEPO Box 3224, Unit 5/80 Camp Road, Broadmeadows, VIC 3047Tel: +61 (03) 8301 7200Fax: +61 (03) 9359 9761Email: [email protected]

NAVAL BASE43 Dooley Street, Naval Base, WA 6165 (PO Box 386, Kwinana, WA 6167)Tel: +61 (08) 9410 2777Fax: +61 (08) 9410 2779Email: [email protected]

NEWCASTLE3 Riverside Drive, Mayfield West, NSW 2304 (PO Box 53, Wickham, NSW 2293)Tel: +61 (02) 4967 5888Fax: +61 (02) 4967 5788Email: [email protected]

PERTH6 Energy Street, Malaga, WA 6090 (PO Box 3203, Malaga DC, WA 6945)Tel: +61 (08) 9207 9200Fax: +61 (08) 9207 9201Email: [email protected]

ROCKHAMPTONCorner McLaughlin and Wade Street, North Rockhampton, QLD 4702 (PO Box 5922, Central Queensland MC, QLD 4701)Tel: +61 (07) 4936 3955Fax: +61 (07) 4936 3966Email: [email protected]

SYDNEY25-39 Chadderton Street, Canley Vale, NSW 2166 (PO Box 3007, Lansvale, NSW 2166)Tel: +61 (02) 8717 3700Fax: +61 (02) 9728 6399Email: [email protected]

TOWNSVILLEPO Box 7788, 11 Whitehouse Street, Garbutt, QLD 4814Tel: +61 (07) 4779 0544Fax: +61 (07) 4725 1364Email: [email protected]


www.rmdkwikform.comOur policy is one of continuous improvement and we reserve the right to change, alter or modify any detail, design, capacity, weight, dimension or code without prior notice being given.

The arrangements of equipment shown in photographs may have been assembled by others and therefore not reflect current best working practices or legislation requirements.

An Interserve Company

Date post:	16-Mar-2022
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Aluminium RMD Australia Beams - Yellow Pages

Documents