+ All Categories
Home > Documents > Aluminum + Cupric Sulphate

Aluminum + Cupric Sulphate

Date post: 18-Nov-2014
Category:
Upload: srinivas
View: 250 times
Download: 2 times
Share this document with a friend
12
>> name Kelsey >> status student >> age 11 >> Question - I am doing a science project. I added water to copper sulfate and then put a piece of aluminium foil into it. The solution put hole in the foil. I would like to find out why? Any additional info would help. >>Thank You Kelsey Wren > Hi Kelsey... First a little bit of theory...The metals (as Aluminum and Copper) react differently, being some "more active" than others. That chemical activity reflects the greater or lesser facility to give up their electrons. If one metal is brought into contact with the ions of another metal, one of two things can happen. Either the metal can transfer electrons to the ions (and a reaction occurs)or the ions do not accept the electrons (no reaction occurs). The metals can be arranged in an activity series with the most reactive at the top and the least reactive at the bottom. Now for your question: at that activity series Aluminum is above Copper. That is, in your
Transcript
Page 1: Aluminum + Cupric Sulphate

>> name Kelsey >> status student >> age 11

>> Question - I am doing a science project. I added water to copper sulfate and then put a piece of aluminium foil into it. The solution put hole in the foil. I would like to find out why? Any additional info would help. >>Thank You Kelsey Wren >Hi Kelsey...First a little bit of theory...The metals (as Aluminum and Copper) reactdifferently, being some "more active"than others.That chemical activity reflects the greater or lesser facility to give up their electrons. If one metal is brought into contact with the ions of another metal, one of two things can happen. Either the metal cantransfer electrons to the ions (and a reaction occurs)or the ions do not accept the electrons (no reactionoccurs). The metals can be arranged in an activity series with the most reactive at the top and the least reactive at the bottom.Now for your question: at that activity series Aluminum is above Copper. That is, in your solution of Copper Sulphate you have Copper ions (and Sulphate ions).When you add Aluminum foil to the solution, the metal Aluminum will transfer electrons to the Copper ions,and Aluminum ions will be formed instead.

Page 2: Aluminum + Cupric Sulphate

2 Al + 3Cu (+2) = 2 Al(+3) + 3Cu That is why you see a hole in the foil indicating that the Al (+3) ions went into solution. At the sametime metalic Copper will be formed and gradually will make a deposit.That is it! Thanks for asking NEWTON!Mabel(Dr. Mabel Rodrigues)================================

Love

A feeling of strong attachment induced by that which delights or commands admiration; preeminent kindness or devotion to another; affection; tenderness; as, the love of brothers and sisters.

Especially, devoted attachment to, or tender or passionate affection for, one of the opposite sex.

Courtship; -- chiefly in the phrase to make love, i. e., to court, to woo, to solicit union in marriage

.

Affection; kind feeling; friendship

; strong liking or desire; fondness; good will; -- opposed to hate; often with of and an object.

Due gratitude and reverence to God.

The object of affection; -- often employed in endearing address.

Cupid, the god of love; sometimes, Venus.

A thin silk stuff.

A climbing species of Clematis (C. Vitalba).

Nothing; no points scored on one side; -- used in counting score at tennis, etc.

To have a feeling of love for; to regard with affection or good will; as, to love one's children and friends; to love one's country; to love one's God.

To regard with passionate and devoted affection, as that of one sex for the other.

Page 3: Aluminum + Cupric Sulphate

To take delight or pleasure in; to have a strong liking or desire for, or interest in; to be pleased with; to like; as, to love books; to love adventures.

To have the feeling of love; to be in love.

Home > Periodic table > Elements > Aluminum

Aluminum - Al

Properties - Health effects of aluminum -Environmental effects of aluminum

Atomic number 13Atomic mass 26.98154 g.mol -1

Electronegativity according to Pauling 1.5Density 2.7 g.cm -3 at 20 °CMelting point 660.4 °CBoiling point 2467 °CVanderwaals radius 0.143 nmIonic radius 0.05 nmIsotopes 3Artificial isotopes 16Electronic shell 1s2 2s2 2p6 3s2 3p1

Energy of first ionization 577.4 kJ.mol -1

Energy of second ionization 1816.1 kJ.mol -

Energy of third ionization 2744.1 kJ.mol -1

Standard potential - 1.67 VDiscovered by Hans Christian Oersted in 1825Aluminum

The name aluminum is derived from the ancient name for alum (potassium aluminum sulphate), which was alumen (Latin, meaning bitter salt). Aluminum was the original name given to the element by Humphry Davy but others called it aluminum and that became the accepted name in Europe. However, in the USA the preferred name was aluminum and when the American Chemical Society debated on the issue, in 1925, it decided to stick with aluminum. Aluminum is a soft and lightweight metal. It has a dull silvery appearance, because of a thin layer of oxidation that forms quickly when it is exposed to air. Aluminum is nontoxic (as the metal) nonmagnetic and non-sparking.

Aluminum has only one naturally occurring isotope, aluminium-27, which is not radioactive.

Applications

A silvery and ductile member of the poor metal group of elements, aluminum is found primarily as the ore bauxite and is remarkable for its resistance to oxidation (aluminum is actually almost always already oxidized, but is usable in this form unlike most metals), its strength, and its light weight. Aluminum is used in many industries to make millions of different products and is very important to the world economy. Structural components made from aluminum are vital to the aerospace industry and very important in other areas of transportation and building in which light weight,

Page 4: Aluminum + Cupric Sulphate

durability, and strength are needed. The use of aluminum exceed that of any other metal except iron. Pure aluminum easily forms alloys with many elements such as copper, zinc, magnesium, manganese and silicon.N early all modern mirrors are made using a thin reflective coating of aluminum on the back surface of a sheet of float glass. Telescope mirrors are also coated with a thin layer of aluminum.Other applications are electrical transmission lines, and packaging (cans, foil, etc.).Because of its high conductivity and relatively low price compared to copper, aluminum was introduced for household electrical wiring to a large degree in the US in the 1960s. Unfortunately problems on the functioning were caused by its greater coefficient of thermal expansion and its tendency to creep under steady sustained pressure, both eventually causing loosening the connection; galvanic corrosion increasing the electrical resistance.The most recent development in aluminum technology is the production of aluminum foam by adding to the molten metal a compound (a metal hybrid), which releases hydrogen gas. The molten aluminum has to he thickened before this is done and this is achieved by adding aluminum oxide or silicon carbide fibers. The result is a solid foam which is used in traffic tunnels and in space shuttle.

Aluminum in the environment

Aluminum is an abundant element in Earth's crust: it is believed to be contained in a percentage from 7.5% to 8.1%. Aluminum is very rare in its free form. Aluminum contribute greatly to the properties of soil, where it is present mainly as insoluble aluminum hydroxide.Aluminum is a reactive metal and it is hard to extract it from its ore, aluminum oxide (Al2O3). Aluminum is among the most difficult metals on earth to refine, the reason is that aluminum is oxidized very rapidly and that its oxide is an extremely stable compound that, unlike rust on iron, does not flake off. The very reason for which aluminum is used in many applications is why it is so hard to produce.Several gemstones are made of the clear crystal form of aluminum oxide known as corundum. The presence of traces of other metals creates various colors: cobalt creates blues sapphires, and chromium makes red rubies. Both these are now easy and cheap to manufacture artificially. Topaz is aluminum silicate coloured yellow by traces of iron. Recovery of this metal from scrap (via recycling) has become an important component of the aluminum industry. Industrial production world-wide of new metal is around 20 million tons per year, and a similar amount is recycled. Known reserves of ores are 6 billion tones.

Health effects of aluminum

Aluminum is one of the most widely used metals and also one of the most frequently found compounds in the earth's crust. Due to these facts, aluminum is commonly known as an innocent compound. But still, when one is exposed to high concentrations, it can cause health problems. The water-soluble form of aluminum causes the harmful effects, these particles are called ions. They are usually found in a solution of aluminum in combination with other ions, for instance as aluminum chlorine.

The uptake of aluminum can take place through food, through breathing and by skin contact. Long lasting uptakes of significant concentrations of aluminum can lead to serious health effects, such as:

- Damage to the central nervous system- Dementia- Loss of memory- Listlessness- Severe trembling

Aluminum is a risk in certain working environments, such as mines, where it can be found in water. People that work in

Page 5: Aluminum + Cupric Sulphate

factories where aluminum is applied during production processes may endure lung problems when they breathe in aluminum dust. Aluminum can cause problems for kidney patients when it enters the body during kidney dialyses.

Inhalation of finely divided aluminum and aluminum oxide powder has been reported as a cause of pulmonary fibrosis and lung damage. This effect, know as Shaver’s Disease, is complicated by the presence in the inhaled air of oxides of iron. May also be implicated in Alzheimer’s disease.

Environmental effects of aluminum

The effects of aluminum have drawn our attention, mainly due to the acidifying problems. Aluminum may accumulate in plants and cause health problems for animals that consume these plants.

The concentrations of aluminum appear to be highest in acidified lakes. In these lakes the number of fish and amphibians is declining due to reactions of aluminum ions with proteins in the gills of fish and the embryo's of frogs.High aluminum concentrations do not only cause effects upon fish, but also upon birds and other animals that consume contaminated fish and insects and upon animals that breathe in aluminum through air. The consequences for birds that consume contaminated fish are eggshell thinning and chicks with low birth-weights. The consequences for animals that breathe in aluminum through air may be lung problems, weight loss and a decline in activity.

Another negative environmental effect of aluminum is that its ions can react with phosphates, which causes phosphates to be less available to water organisms.

High concentrations of aluminum may not only be found in acidified lakes and air, but also in the groundwater of acidified soils. There are strong indications that aluminum can damage the roots of trees when it is located in groundwater.

We cab tell you more about the behaviour of aluminum in water

Back to periodic chart

About Lenntech Turnkey plants Pilot plants Containerized plants Services Career at Lenntech Internships Periodic table Calculators Visitors information Our partners Contact us

Lenntech BV

Rotterdamseweg 402 M 2629 HH Delft

The Netherlands

Page 6: Aluminum + Cupric Sulphate

tel: (+31)(0)15 2610900

fax: (+31)(0)15 26.16.289

e-mail: http://www.lenntech.com/feedback/feedback_uk.htm?ref_title=Aluminum

Elements

Actinium Silver

Aluminum Americium Argon Arsenic Astatine Gold Boron Barium Beryllium Bohrium Bismuth Berkelium Bromine Carbon Calcium Cadmium Cerium Californium Chlorine Curium Cobalt Chromium Cesium Copper Dubnium Darmstadtium Dysprosium Erbium Einsteinium Europium Fluorine Iron Fermium Francium Gallium Gadolinium Germanium

Page 7: Aluminum + Cupric Sulphate

Hydrogen Helium Hafnium Mercury Holmium Hassium Iodine Indium Iridium Potassium Krypton Lanthanum Lithium Lawrencium Lutetium Mendelevium Magnesium Manganese Molybdenum Meitnerium Nitrogen Sodium Niobium Neodymium Neon Nickel Nobelium Neptunium Oxygen Osmium Phosphorus Protactinium Lead Palladium Promethium Polonium Praseodymium Platinum Plutonium Radium Rubidium Rhenium Rutherfordium Roentgenium Rhodium Radon Ruthenium Sulfur Antimony Scandium

Page 9: Aluminum + Cupric Sulphate

o Sea water desalination o Surface water treatment o Water softening systems o Disinfection o Remineralisation o Waste water treatment o Pesticide treatment o Iron and manganese o Arsenic removal o Heavy metal removal o Nitrates treatment

Systems o Deep filtration o Reverse osmosis o Ultrafiltration o Ion exchange o Ozone disinfection o UV disinfection o ClO2 disinfection o Sediment filters o Clarifiers

Products o Sediment filters o Filtration media o RO membrane o Ion exchange resins o Chemicals o Measurement devices

Library o Reverse osmosis o Ion exchange o Electrodionisation o Ultrafiltration o Media filtration o Coagulation - floculation o Clarification o Fine filtration o Particles size o Beta Ratio o Bubble point o Absolute Vs. nominal rating for filters o Oil filtration and Oil-Block filters o Zeta potential o UV o Chlorine dioxide o Ozone o Regeneration active carbon o Adsorption o Advanced oxidation


Recommended