1 ‘M’ Coax Electrical Connector Subsea / Underwater / Marine The most common applications: ROV • Dive Bell Connectors • Underwater Cameras and Lights • Underwater Thruster • Strain Termination • Key Feature: 6 electrical contacts • 75 ohm rated • Pressure up to 9,300 Psi (Mated) • Open face pressure up to 6,000 Psi • Oil filled available as standard (OF) • Up to 250 VDC • Up to 26 amps - single pin see page 11 • Revision 2019-03 www.CRE-Marine.com Tel: + 44 01224 872 445 Fax: + 44 01224 873 710 Email: [email protected]
ROV•Dive Bell Connectors•Underwater Cameras and Lights•Underwater Thruster•Strain Termination •
Key Feature:
6 electrical contacts•75 ohm rated •Pressure up to 9,300 Psi (Mated)•Open face pressure up to 6,000 Psi•Oil filled available as standard (OF)•Up to 250 VDC•Up to 26 amps - single pin see page 11•
BR - BULKHEAD CONNECTOR RECEPTACLECONNECTOR SIZE NUMBER OF CONTACTSM - MALE/F- FEMALE
CABLE LENGTH IN MM (IE 900MM) CABLE GAUGE NUMBER
BR M 06 M CX 0900 24 01
M - MALE/F- FEMALE
CABLE GAUGE NUMBER
CX-COAX
CONNECTOR SIZE
INTERFACE TYPE
PL- PLUG IN LINE
NUMBER OF CONTACTS
CABLE LENGTH IN MM (IE 900MM)
PL M 06 M CX 0900 24 01
CX-COAX
INTERNAL MANUFACTURE CARDTYPE: PART No: DATE REQUIRED: QTY:No. OF WAYS: 26ALLOCATION:ITEM No: QTY. DESCRIPTION REMARKS / MATERIALPART NoNOTE 1NOTE 2NOTE 3 PLEASE ENSURE INTERNAL SURFACE INDICATED IS SHOTBLASTED AND THAT ALL INTERNAL SURFACES ARE CLEAR OF GRIT BEFORE COMMENCING WITH ASSEMBLY NOTES ETC.PLEASE ENSURE 'O' RINGS ARE FITTED BEFORE LOCATING ASSEMBLED INSERT AND BACKPOTTINGPLEASE ENSURE ALL CONTACTS ARE SHOTBLASTED BEFORE ASSEMBLY INTO INSERT ASSEMBLY:1000V I/R:CONTINUITY MATING CHECK:NUMBERED QTY. FAILED:QTY. PASSED:QTY. PASSED:QTY. FAILED:QTY. FAILED:QTY. PASSED:QTY. FAILED:QTY. PASSED:QTY. FAILED:QTY. PASSED: TECH SIGNATURE:TECH SIGNATURE:TECH SIGNATURE:TECH SIGNATURE:TECH SIGNATURE: DATEDATEDATEDATEDATEVISUALINSPECTION IMC No:DOC DATE: JUNE. 2014 REV: 312345678910111213
2
Standard Mechanical Specification:
NOTES:Contact CRE for special order materials.
Options: Pressure balanced Oil Filled (PBOF)• Field Installable• Mixed contact sizes for power/data requirement• Bespoke design/configuration to suit customer requirements at no extra cost• Available in alternative materials: Aluminium, Titanium etc.•
Testing:
Pressure testing up to 9,300 Psi• Durability testing with 100 mate and re-mate cycles• Open face pressure testing up to 5,700 Psi•
A B C D E F G H-'O'Ring J-'O'Ring K L TYPE38 49.5 12.5 25.4 15.8 29.5 6.0 BS116 N/A 52 15.93/15.98 0145 49.5 12.5 31.8 18.0 29.5 7.0 BS118 BS016 60 18.0/18.05 0238 49.5 12.5 25.4 16.5 29.5 4.9 BS019 N/A 48 16.5/16.05 03
Coax-75ohm rated•Transmission performance-up to 3G/1080p 60 Htz•Pressure blocked to 6000m open face•For current carrying capacity and wire recommendations see page 11•
