+ All Categories
Home > Documents > Amaline – Submersible Pump

Amaline – Submersible Pump

Date post: 25-Jan-2022
Category:
Upload: others
View: 7 times
Download: 0 times
Share this document with a friend
2
Our technology. Your success. Pumps n Valves n Service Applications: Recirculating activated sludge from the nitrification to the denitrification stage of activated sludge tanks Economic handling of stormwater, river water, surface water and polder water at low heads Generating flow in water bodies More information: www.ksb.com/products Amaline – Submersible Pump Amacontrol III – Protection Module for Water and Waste Water Products Intelligent monitoring
Transcript
Page 1: Amaline – Submersible Pump

Our technology. Your success.Pumps n Valves n Service

Applications: ■ Recirculating activated sludge from the nitrification to the denitrification stage of activated sludge tanks

■ Economic handling of stormwater, river water, surface water and polder water at low heads

■ Generating flow in water bodies

More information: www.ksb.com/products

Amaline – Submersible Pump

Amacontrol III – Protection Modulefor Water and Waste Water Products

Intelligent monitoring

Page 2: Amaline – Submersible Pump

KSB SE & Co. KGaAJohann-Klein-Straße 967227 Frankenthal (Germany) www.ksb.com

1594

.021

/03-

EN /

04.2

0 / ©

KSB

SE

& C

o. K

GaA

202

0 · S

ub

ject

to

tec

hn

ical

mo

dif

icat

ion

wit

ho

ut

pri

or

no

tice

Amaline – Submersible Pump

1 Maximum reliability

3-fold dynamic sealing system consisting of two (SiC/SiC)

mechanical seals and a lip seal.

2 Environmentally friendly

The oil chamber is filled with ecologically acceptable

white oil.

3 Perfectly protected

An absolutely water-tight cable entry protects the motor

against humidity.

4 Overheating impossible

Temperature sensors monitor any heat build-up in

the motor.

Technical data

Amaline 200/300/400 (direct drive)

Amaline 500/600/800 (spur gear drive)

Speed [rpm] 725 – 1,450 206 – 719

Power [kW] 1.25 – 7.5 4.5 – 27.0

Nominal diameter [DN] 200/300/400 500/600/800

Flow rate [m3/h] 425 – 1,800 2,700 – 6,600

Head [m] 1.2 – 3.4 2.15 – 3.5

Fluid temperature [°C] max. 40 max. 40

1

2

4

6

5 Everything under control*

A leakage chamber between the oil chamber and the

gear unit provides additional safety.

6 Optional*

Leakage sensor in leakage chamber available for

non-explosionproof version

16,000 operating hours without oil change

Oil change required every two years

Easy to install

3

5

*Amaline 500/600/800 only


Recommended