+ All Categories
Home > Documents > Amarex KRT - MPC Services Ltd · 2020. 8. 20. · Amarex KRT, n = 1450 / 960 rpm, E impeller 50 Q...

Amarex KRT - MPC Services Ltd · 2020. 8. 20. · Amarex KRT, n = 1450 / 960 rpm, E impeller 50 Q...

Date post: 09-Feb-2021
Category:
Upload: others
View: 10 times
Download: 0 times
Share this document with a friend
122
Submersible Motor Pump Amarex KRT 50 Hz Characteristic Curves Booklet
Transcript
  • Submersible Motor Pump

    Amarex KRT

    50 Hz

    Characteristic Curves Booklet

  • Legal information/Copyright

    Characteristic Curves Booklet Amarex KRT

    All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edi-ted or processed for any other purpose, nor otherwise transmitted, published or made available to athird party without the manufacturer's express written consent.

    Subject to technical modification without prior notice.

    © KSB Aktiengesellschaft, Frankenthal 07.10.2013

  • Contents

    Waste Water ......................................................................................................................................................4

    Submersible Motor Pump ............................................................................................................................................... 4

    Amarex KRT ...............................................................................................................................................................4

    Designation .......................................................................................................................................................... 4

    General ................................................................................................................................................................. 4

    Installation types .................................................................................................................................................6

    Selection charts ................................................................................................................................................... 7

    Amarex KRT; n = 2900 rpm; S impeller ......................................................................................................... 7

    Amarex KRT, n = 2900 / 1450 / 960 rpm, F impeller ..................................................................................... 7

    Amarex KRT, n = 1450 / 960 rpm, E impeller ................................................................................................ 8

    Amarex KRT, n = 2900 / 1450 / 960 rpm, D impeller ................................................................................... 8

    Amarex KRT, n = 2900 / 1450 rpm, K impeller ............................................................................................ 9

    Amarex KRT, n = 960 rpm, K impeller ......................................................................................................... 9

    Amarex KRT, n = 580 / 480 rpm, K impeller .............................................................................................. 10

    Amarex KRT, n = 725 rpm, K impeller ........................................................................................................10

    Characteristic curves ..........................................................................................................................................11

    S impeller ...................................................................................................................................................... 11

    F impeller ...................................................................................................................................................... 13

    E impeller ..................................................................................................................................................... 31

    D impeller ..................................................................................................................................................... 41

    K impeller .....................................................................................................................................................57

    Contents

    3

  • Waste Water

    Submersible Motor Pump

    Amarex KRT

    Designation

    Example: Amarex KRT K 150-500/155 4 UN G-D IE3

    Key to the designation

    Code DescriptionAmarexKRT

    Type series

    K Impeller typeD Open, diagonal single-channel impellerE Closed single-channel impellerF Free-flow impellerK Closed multi-channel impellerS Impeller with cutter

    150 Nominal discharge nozzle diameter [mm]500 Maximum nominal impeller diameter [mm]155 Motor size4 Number of poles

    24681012

    U Motor versionU Non-explosionproofW Hot water version, non-explosionproofX Explosion-proof to ATEX II 2G T3Y Explosion-proof to ATEX II 2G T4

    N Generation codeN Optionally available with jacket cooling

    Code DescriptionK Optionally available as dry-installed model

    with convection coolingG Material variant

    G Standard variant, grey cast ironG1 Like G, with impeller made of duplex stain-

    less steelG2 Like G, with impeller made of white cast

    ironGH Like G, with impeller and intermediate cas-

    ing made of white cast ironH White cast ironC1 Stainless steelC2 Stainless steel

    D Installation type (⇨ Page 6)S Stationary wet installation with guide wire

    or guide rail arrangementD Stationary dry installation, verticalP Transportable wet-installed modelK Stationary wet installation with guide wire

    or guide rail arrangementH Stationary dry installation, horizontal

    IE3 Motor efficiency classification1) No efficiency classificationIE3 Efficiency classification to IEC 60034-30 op-

    tionally available

    General

    The indicated heads and performance data apply to materialvariant G in combination with pumped fluids with a density ρ =1 kg/dm3 and a kinematic viscosity ν ≦ 20 mm2/s.For hydraulic acceptance tests of pumps made of different ma-terials the documented efficiencies must be reduced by 2 per-cent.

    Impeller types

    K impellers are trimmed to match the specified duty point. Pur-chase orders must always contain the QH data or impeller di-ameter. If the hydraulic selection program is used, the impellerdiameter is automatically computed based on the QH data andadded to the designation of the pump set.

    S, F, D and E impellers can only be supplied with the documen-ted impeller diameters. In the purchase order, the impeller di-ameter must always be added to the designation of the pumpset.

    Pump input power

    The pump input power must be matched to the density of thefluid handled:P2req = ρfluid [kg/dm3] x P2docuThe operating point with the largest pump input power is deci-sive for the operating range of the motor. To compensate theunavoidable tolerances of the characteristic curves of system,pump and motor we recommend selecting a motor size whichprovides sufficient power reserves.

    1) Blank

    Waste WaterSubmersible Motor Pump

    4 Amarex KRT

  • Recommended minimum reserves2)

    Required pump in-put power

    Motor power reserve

    [kW] Mains operation With frequency in-verter

    < 30 10 % 15 %> 30 5 % 10 %

    For installation types K and D (with cooling jacket) a power re-serve of 1.5 kW must always be added for the cooling circuit.

    General information on operating submersible pumpsin waste water

    NOTE! In the case of waste water, too low a flow velocity inthe discharge line will lead to clogging and increased wear. Aminimum flow velocity in the vertical riser of 2 m/s must be ob-served.

    NOTE! In the case of waste water, too low a circumferentialspeed of the impeller will lead to clogging of the hydraulic sys-tem (frequency inverter operation). A minimum circumferen-tial speed (measured at the outside diameter of the impeller)of 15 m/s must be observed.

    2) If larger reserves are stipulated by local regulations or are required to compensate for uncertain factors in system calcula-tions, these larger reserves must be provided.

    Waste WaterSubmersible Motor Pump

    Amarex KRT 5

  • Installation types

    Installation type S

    Stationary wet installation (S1 operation with submerged mo-tor)

    Guide wire arrangement Guide rail arrangementInstallation type D

    Stationary dry installation, vertical (S1 operation)

    Installation type P

    Transportable wet-installed model (S1 operation with sub-merged motor)

    Installation type K

    Stationary wet installation (S1 operation with motor outsidethe fluid)

    Guide wire arrangement Guide rail arrangementInstallation type H

    Stationary dry installation, horizontal (S1 operation)

    Waste WaterSubmersible Motor Pump

    6 Amarex KRT

  • Selection charts

    Amarex KRT; n = 2900 rpm; S impeller

    5 10 20 30 40 50 100 200Q [US.gpm]4 5 10 20 30 40 50 100Q [IM.gpm]

    0.3 0.4 0.5 1 2 3 4 5 10Q [l/s]

    1 2 3 4 5 10 20 30 40 50

    4

    5

    10

    20

    30

    40

    50

    100

    200

    300

    H [ft]

    1

    2

    3

    4

    5

    10

    20

    30

    40

    50

    100

    H [m]

    50--210/ 2p

    40--250/ 2p

    Q [m3/h]

    Amarex KRT, n = 2900 / 1450 / 960 rpm, F impeller

    50 100 200 300 400 500 1000 2000 3000 4000Q [US.gpm]40 50 100 200 300 400 500 1000 2000 3000Q [IM.gpm]

    3 4 5 10 20 30 40 50 100 200Q [l/s]

    10 20 30 40 50 100 200 300 400 500 1000

    4

    5

    10

    20

    30

    40

    50

    100

    200

    300

    H [ft]

    1

    2

    3

    4

    5

    10

    20

    30

    40

    50

    100

    H [m]

    150--315/ 6p

    100--401/ 4p100--315/ 4p

    150--401/ 6p

    40--250/ 2p

    80--250/251/ 2p

    40--250/ 4p 80--250/ 4p

    100--250/ 4p

    Q [m3/h]

    80--316/ 2p

    100--240/ 2p

    150--401/ 4p

    Waste WaterSubmersible Motor Pump

    Amarex KRT 7

  • Amarex KRT, n = 1450 / 960 rpm, E impeller

    50 100 200 300 400 500 1000 2000 3000 4000Q [US.gpm]40 50 100 200 300 400 500 1000 2000 3000Q [IM.gpm]

    3 4 5 10 20 30 40 50 100 200Q [l/s]

    10 20 30 40 50 100 200 300 400 500 1000

    4

    5

    10

    20

    30

    40

    50

    100

    200

    300

    H [ft]

    1

    2

    3

    4

    5

    10

    20

    30

    40

    50

    100

    H [m]

    100--250/ 4p

    100--315/ 4p

    150--315/ 4p

    100--401/ 4p

    150--401/ 4p

    150--315/ 6p

    200--401/ 4p

    150--401/ 6p

    200--401/ 6p

    80--250/ 4p

    Q [m3/h]

    Amarex KRT, n = 2900 / 1450 / 960 rpm, D impeller

    200 300 400 500 1000 2000 3000 4000Q [US.gpm]200 300 400 500 1000 2000 3000 4000Q [IM.gpm]

    10 20 30 40 50 100 200 300 400 500Q [l/s]

    30 40 50 100 200 300 400 500 1000 2000

    4

    5

    10

    20

    30

    40

    50

    100

    200

    300

    H [ft]

    1

    2

    3

    4

    5

    10

    20

    30

    40

    50

    100

    H [m]

    100--251/ 4p

    150--401/ 4p

    100--316/ 4p150--400/ 4p

    150--315/ 4p

    200--315/ 4p

    150--401/ 6p

    200--400/ 4p

    200--315/ 6p

    250--400/ 4p

    200--400/ 6p

    300--400/ 6p250--400/ 6p

    80--315/ 2p

    100--315/ 2p

    80--315/ 4p

    Q [m3/h]

    150--251/ 4p

    150--315/ 6p

    Waste WaterSubmersible Motor Pump

    8 Amarex KRT

  • Amarex KRT, n = 2900 / 1450 rpm, K impeller

    Q [m³/h]1 2 3 4 5 10 20 30 40 50 100 200 300 400 500 1000 2000 3000

    5 10 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000 5000 10000Q [US.gpm]

    4 5 10 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000 5000 10000Q [IM.gpm]

    2

    3

    4

    5

    10

    20

    30

    40

    50

    100

    H [m]

    10

    20

    30

    40

    50

    100

    200

    300

    H [ft]

    0.3 0.4 0.5 1 2 3 4 5 10 20 30 40 50 100 200 300 400 500Q [l/s]

    40-250K 2p

    80-251K 2p

    40-250K 4p

    100-250K 4p

    100-315K 4p

    100-400K 4p

    100-401K 4p

    150-315K 4p

    150-401K 4p

    150-500K 4p

    200-330K 4p

    200-401K 4p

    200-500K 4p

    250-400K 4p

    250-401K 4p

    300-420K 4p

    300-503K 4p

    Amarex KRT, n = 960 rpm, K impeller

    H[m]

    Q[m³/h]50 100 200 300 400 500 1000 2000 3000 4000 5000 7000Q[m³/h]

    300 400 500 1000 2000 3000 4000 5000 10000 20000 30000US.gpm

    200 300 400 500 1000 2000 3000 4000 5000 10000 20000IM.gpm

    1

    2

    3

    4

    5

    10

    20

    30

    40

    50

    100

    200

    H[m]

    4

    5

    10

    20

    30

    40

    50

    100

    200

    300

    400

    500

    ft

    20 30 40 50 100 200 300 400 500 1000l/s

    500-630K

    400-900K

    400-710K

    400-630K

    400-500K

    350-710K

    350-636K

    350-630K

    350-501K

    350-500K

    350-420K

    300-500K

    300-400K

    250-900K

    250-630K

    250-401K

    200-501K

    200-401K

    200-316K

    200-315K

    151-401K

    150-401K

    150-315K

    100-400K

    500-710

    Waste WaterSubmersible Motor Pump

    Amarex KRT 9

  • Amarex KRT, n = 580 / 480 rpm, K impeller

    H[m]

    Q[m³/h]500 1000 2000 3000 4000 5000 10000 20000

    3000 4000 5000 10000 20000 30000 40000 50000Q [US.gpm]

    2000 3000 4000 5000 10000 20000 30000 40000 50000Q [IM.gpm]

    1

    2

    3

    4

    5

    10

    20

    30

    40

    50

    H[m]

    4

    5

    10

    20

    30

    40

    50

    100

    H [ft]

    200 300 400 500 1000 2000 3000 4000 5000Q [l/s]

    700-901K 10p

    700-900K 10p600-710K 10p

    500-900K 10p

    500-630K 10p

    400-500K 10p

    700-900K 12p

    Amarex KRT, n = 725 rpm, K impeller

    200 300 400 500 1000 2000 3000 4000 5000 10000Q [m³/h]

    1000 2000 3000 4000 5000 10000 20000 30000 40000Q [US.gpm]

    1000 2000 3000 4000 5000 10000 20000 30000Q [IM.gpm]

    1

    2

    3

    4

    5

    10

    20

    30

    40

    50

    70

    H [m]

    4

    5

    10

    20

    30

    40

    50

    100

    200

    H [ft]

    100 200 300 400 500 1000 2000Q [l/s]

    300-400K

    300-401K

    350-500K

    350-501K

    400-500K

    400-710K

    500-630K

    500-900K

    600-520K

    600-710K

    700-901K

    Waste WaterSubmersible Motor Pump

    10 Amarex KRT

  • Characteristic curves

    S impeller

    Amarex KRT S 40-250, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42208s/6

    0 5 10 15 20 25 30Q [m³/h]

    0 20 40 60 80 100 120Q [US.gpm]

    0 20 40 60 80 100Q [IM.gpm]

    20

    30

    40

    50

    60

    70

    80

    16

    H [m]

    100

    150

    200

    250

    H [ft]

    0 2 4 6 8Q [l/s]

    2

    4

    6

    8

    10

    1

    11.5

    P [kW]

    5

    10

    15

    P [hp]

    0 5 10 15 20 25 30Q [m³/h]

    ø235

    ø235

    ø225

    ø225

    ø205

    ø205

    ø190

    ø190

    ø175

    ø175

    Qmin

    41.0

    10

    1825

    3034

    3740

    40

    41.1

    10

    1825

    3034

    3740

    42.1

    1018

    2530

    3437

    40

    40

    4242

    42.6

    1018

    2530

    3437

    40

    40

    42

    42

    42.6

    1018

    25 30 3437

    40

    40

    42

    42

    η [%]

    Free passage = 7 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P D

    52U/X ... 5,0 ✘ ✘ -62W ... 5,0 ✘ ✘ -62U/Y(IE2)/Y 5,0 ✘ ✘ -62U/X ... 6,5 ✘ ✘ -82W ... 6,5 ✘ ✘ -82U/Y(IE2)/Y 6,5 ✘ ✘ -82U/X ... 8,5 ✘ ✘ -122W ... 8,5 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G S P D

    122U/Y(IE3)/Y 8,5 ✘ ✘ -82X ... 8,5 ✘ ✘ -122W ... 8,5 ✘ ✘ -122U ... 12,0 ✘ ✘ -122X ... 12,0 ✘ ✘ -172U/Y(IE3)/Y 12,0 ✘ ✘ -172W ... 14,5 ✘ ✘ -172U ... 17,0 ✘ ✘ -172X ... 17,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 11

  • Amarex KRT S 50-210, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42897s/1

    0 2 4 6 8 10 12 14Q [m³/h]

    0 20 40 60Q [US.gpm]

    0 10 20 30 40 50Q [IM.gpm]

    20

    25

    30

    35

    40

    45

    47

    H [m]

    80

    100

    120

    140

    H [ft]

    0 1 2 3 4Q [l/s]

    2.0

    2.5

    3.0

    3.5

    3.9

    P [kW] 3

    4

    5

    P [hp]

    0 2 4 6 8 10 12 14Q [m³/h]

    ø185

    ø185

    ø180

    ø180

    ø175

    ø175

    ø170

    ø170

    Qmin

    29.8

    10

    15

    20

    2426

    28

    28

    29.4

    10

    15

    20

    2426

    28

    28

    28.4

    10

    15

    20

    24

    26

    26

    28

    28

    28.5

    10

    15

    20

    24

    26

    26

    28

    28

    η [%]

    Free passage = 7 mm

    Material variant C1/C2 for motor version U/Y/W

    Motor size P2 [kW] Installation type

    C1/C2 S P D

    032U ... 3,4 ✘ ✘ -032Y ... 3,4 ✘ ✘ -032W ... 3,2 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    12 Amarex KRT

  • F impeller

    Amarex KRT F 40-250, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42908s/3

    0 10 20 30 40 50 60Q [m³/h]

    0 100 200Q [US.gpm]

    0 50 100 150 200Q [IM.gpm]

    10

    20

    30

    40

    50

    60

    70

    74

    H [m] 50

    100

    150

    200

    H [ft]

    0 5 10 15Q [l/s]

    0

    5

    10

    15

    17

    P [kW]

    0

    10

    20

    P [hp]

    0 10 20 30 40 50 60Q [m³/h]

    ø210

    ø210

    ø200

    ø200

    ø190

    ø190

    ø180

    ø180

    ø170

    ø170

    ø160

    ø160

    ø150

    ø150

    Qmin

    44.7

    10 2030

    35

    40

    434444

    44.1

    10 2030

    3540

    43

    44

    44

    44.1

    1020

    3035

    40

    40

    43

    43

    4444

    43.8

    10 2030

    3540

    40

    43

    4343.6

    10 2030

    35

    35

    40

    40

    43

    4343.8

    10 2030 35

    35

    40

    40

    43

    43

    44.2

    10 2030

    30

    35

    35

    40

    40

    43

    43

    4444

    η [%]

    Free passage = 25 mm

    Material variant G/G1/G2/GH/H/C1/C2 for motor versionU/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H C1/C2 S P D

    52U/X ... 5,0 5,0 ✘ ✘ -62W ... 5,0 5,0 ✘ ✘ -62U/Y(IE2)/Y 5,0 - ✘ ✘ -62U/X ... 6,5 6,5 ✘ ✘ -82W ... 6,5 6,5 ✘ ✘ -82U/Y(IE2)/Y 6,5 - ✘ ✘ -82U/X ... 8,5 8,3 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H C1/C2 S P D

    122W ... 8,5 8,5 ✘ ✘ -122U/Y(IE3)/Y 8,5 - ✘ ✘ -122U/X ... 12,0 11,0 ✘ ✘ -172U/Y(IE3)/Y 12,0 - ✘ ✘ -172W ... 14,5 14,5 ✘ ✘ -172U/X ... 17,0 16,5 ✘ ✘ -252U/Y(IE3)/Y 19,0 - ✘ ✘ -252W ... 20,0 17,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 13

  • Amarex KRT F 50-210, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42407s/4

    0 5 10 15 20 25 30 35Q [m³/h]

    0 50 100 150Q [US.gpm]

    0 50 100Q [IM.gpm]

    15

    20

    25

    30

    11

    34

    H [m]

    40

    60

    80

    100

    H [ft]

    0 2 4 6 8 10Q [l/s]

    2

    3

    4

    4.6

    P [kW]

    3

    4

    5

    6

    P [hp]

    0 5 10 15 20 25 30 35Q [m³/h]

    ø190

    ø190

    ø180

    ø180

    ø175

    ø175

    ø170

    ø170

    Qmin

    31.7

    10

    15

    20

    25

    28

    30

    33.7

    10

    15

    20

    25

    28

    30

    32

    32.2

    10

    15

    20

    25

    28

    30

    32

    33.6

    10

    15

    20

    25

    28

    30

    32

    η [%]

    Free passage = 40 mm

    Material variant H/C1/C2 for motor version U/Y/W

    Motor size P2 [kW] Installation type

    H C1/C2 S P D

    022U ... 2,6 2,5 ✘ ✘ -022Y ... 2,6 2,5 ✘ ✘ -022W ... 2,6 2,3 ✘ ✘ -

    Motor size P2 [kW] Installation type

    H C1/C2 S P D

    032U ... 3,95 3,4 ✘ ✘ -032Y ... 3,95 3,4 ✘ ✘ -032W ... 3,95 3,2 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    14 Amarex KRT

  • Amarex KRT F 65-210, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42413s/2

    0 10 20 30 40 50 60Q [m³/h]

    0 100 200Q [US.gpm]

    0 50 100 150 200Q [IM.gpm]

    5

    10

    15

    20

    2

    23

    H [m]

    20

    40

    60

    H [ft]

    0 5 10 15Q [l/s]

    1

    2

    3

    4

    4.4

    P [kW] 2

    4

    P [hp]

    0 10 20 30 40 50 60Q [m³/h]

    ø140

    ø140

    ø130

    ø130

    ø120

    ø120

    ø115

    ø115

    Qmin

    35.5

    2025

    30

    33

    33

    37.2

    2025

    30

    30

    33

    33

    36

    3637.2

    2025

    25

    30

    30

    33

    33

    36

    3635.3

    20

    20

    25

    25

    30

    30

    33

    33

    η [%]

    Free passage = 65 mm

    Material variant H/C1/C2 for motor version U/Y/W

    Motor size P2 [kW] Installation type

    H C1/C2 S P D

    012U ... 2,1 2,1 ✘ ✘ -012Y ... 2,1 2,1 ✘ ✘ -012W ... 2,1 2,0 ✘ ✘ -022U ... 2,6 2,5 ✘ ✘ -

    Motor size P2 [kW] Installation type

    H C1/C2 S P D

    022Y ... 2,6 2,5 ✘ ✘ -022W ... 2,6 2,3 ✘ ✘ -032U ... 3,95 3,4 ✘ ✘ -032Y ... 3,95 3,4 ✘ ✘ -032W ... 3,95 3,2 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 15

  • Amarex KRT F 80-250, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K43192s/0

    0 20 40 60 80 100 120 140 160 180Q [m³/h]

    0 200 400 600 800Q [US.gpm]

    0 200 400 600Q [IM.gpm]

    10

    20

    30

    40

    50

    60

    H [m] 50

    100

    150

    200

    H [ft]

    0 10 20 30 40 50Q [l/s]

    10

    20

    30

    2

    P [kW] 20

    40

    P [hp]

    0 20 40 60 80 100 120 140 160 180Q [m³/h]

    ø210

    ø210

    ø200

    ø200

    ø190

    ø190

    ø180

    ø180

    ø170

    ø170

    ø160

    ø160

    ø150

    ø150

    Qmax

    49.1

    2030

    40

    45

    45

    48.4

    2030

    40

    45

    45

    47.4

    2030

    40

    45

    45

    47.1

    2030

    40

    40

    45

    45

    46.0

    2030

    40

    40

    45

    4544.9

    2030

    40

    40

    43.5

    2030

    40

    40

    η [%]

    Free passage = 76 mm

    Material variant G/G1/G2/GH/H/C1/C2 for motor versionU/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H C1/C2 S P D

    122U/Y(IE3)/Y 8,5 - ✘ ✘ -122W ... 8,5 8,5 ✘ ✘ -122U/X ... 12,0 11,0 ✘ ✘ -172U/Y(IE3)/Y 12,0 12,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H C1/C2 S P D

    172W ... 14,5 14,5 ✘ ✘ -172U/X ... 17,0 16,5 ✘ ✘ -252U/Y(IE3)/Y 19,0 - ✘ ✘ -252W ... 20,0 17,0 ✘ ✘ -22 2U/X ... 22,0 - ✘ ✘ -252U/X ... 25,0 22,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    16 Amarex KRT

  • Amarex KRT F 80-251, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K43181s/1

    0 20 40 60 80 100Q [m³/h]

    0 100 200 300 400Q [US.gpm]

    0 100 200 300Q [IM.gpm]

    0

    10

    20

    30

    40

    50

    60

    66

    H [m]

    0

    50

    100

    150

    200

    H [ft]

    0 5 10 15 20 25Q [l/s]

    5

    10

    15

    20

    1

    P [kW] 10

    20

    P [hp]

    0 20 40 60 80 100Q [m³/h]

    ø230

    ø230

    ø220

    ø220

    ø210

    ø210

    ø200

    ø200

    ø190

    ø190

    ø175

    ø175

    ø160

    ø160

    ø145

    ø145

    Qmax

    48.1

    102020

    3035

    40

    45

    45.6

    1020

    3035

    40

    45

    4544.1

    1020

    3035

    40

    42.2

    1020

    3035

    40

    4040.4

    1020

    30

    35

    35

    40

    40

    36.3

    1020

    30

    35

    3531.4

    1020

    30

    3027.8

    1020

    η [%]

    Free passage = 50 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P D

    52U/X ... 5,0 ✘ ✘ -62W ... 5,0 ✘ ✘ -62U/Y(IE2)/Y 5,0 ✘ ✘ -62U/X ... 6,5 ✘ ✘ -82W... 6,5 ✘ ✘ -82U/Y(IE2)/Y 6,5 ✘ ✘ -82U/X ... 8,5 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G S P D

    122W ... 8,5 ✘ ✘ -122U/Y(IE3)/Y 8,5 ✘ ✘ -122U/X ... 12,0 ✘ ✘ -172U/Y(IE3)/Y 12,0 ✘ ✘ -172W ... 14,5 ✘ ✘ -172U/X ... 17,0 ✘ ✘ -252U/Y(IE3)/Y 19,0 ✘ ✘ -252W ... 20,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 17

  • Amarex KRT F 80-316, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K43148s/1

    0 20 40 60 80 100 120Q [m³/h]

    0 100 200 300 400 500Q [US.gpm]

    0 100 200 300 400Q [IM.gpm]

    20

    30

    40

    50

    60

    70

    80

    14

    H [m]

    50

    100

    150

    200

    250

    H [ft]

    0 10 20 30Q [l/s]

    10

    15

    20

    25

    8

    P [kW]

    20

    30

    P [hp]

    0 20 40 60 80 100 120Q [m³/h]

    ø265

    ø265

    ø260

    ø260

    ø250

    ø250

    ø240

    ø240

    ø230

    ø230

    ø220

    ø220

    ø210

    ø210

    ø200

    ø200

    Qmin

    20.1

    10

    20

    28.2

    10

    20

    35.4

    1020

    30

    37.5

    1020

    30

    36

    36

    37.4

    1020

    30

    36

    36

    35.8

    10

    20

    30

    33.8

    10

    20

    30

    31.4

    10

    20

    30

    30

    η [%]

    Free passage = 65 mm

    Material variant G for motor version U/X/W

    Motor size P2 [kW] Installation type

    G S P D

    172U/X ... 17,0 ✘ ✘ -232W ... 20,0 ✘ ✘ -232U/X ... 25,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    18 Amarex KRT

  • Amarex KRT F 100-240, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42082s/2

    0 20 40 60 80 100 120 140Q [m³/h]

    0 200 400 600Q [US.gpm]

    0 100 200 300 400 500Q [IM.gpm]

    15

    20

    25

    30

    35

    11

    38

    H [m]

    40

    60

    80

    100

    120

    H [ft]

    0 10 20 30 40Q [l/s]

    8

    10

    12

    14

    16

    17

    P [kW]

    15

    20

    P [hp]

    0 20 40 60 80 100 120 140Q [m³/h]

    ø190

    ø190

    ø180

    ø180

    ø170

    ø170

    Qmin

    44.9

    10

    20

    3030

    35

    4042

    44

    43.2

    10

    20

    30

    35

    40

    40

    42

    42

    42.2

    10

    20

    30

    35

    40

    40

    42

    42

    η [%]

    Free passage = 100 mm

    Material variant G/G1/G2/GH/H/C1/C2 for motor versionU/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H C1/C2 S P D

    122U/X ... 12,0 11,0 ✘ ✘ -172U/Y(IE3)/Y 12,0 - ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H C1/C2 S P D

    172W ... 14,5 14,5 ✘ ✘ -172U/X ... 17,0 16,5 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 19

  • Amarex KRT F 40-250, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K43008s/2

    0 5 10 15 20 25 30Q [m³/h]

    0 50 100Q [US.gpm]

    0 20 40 60 80 100Q [IM.gpm]

    2

    4

    6

    8

    10

    12

    14

    16

    18

    H [m]

    20

    40

    60

    H [ft]

    0 2 4 6 8Q [l/s]

    0.5

    1.0

    1.5

    2.0

    0.1

    2.3

    P [kW] 1

    2

    3

    P [hp]

    0 5 10 15 20 25 30Q [m³/h]

    ø210

    ø210

    ø200

    ø200

    ø190

    ø190

    ø180

    ø180

    ø170

    ø170

    ø160

    ø160

    ø150

    ø150

    Qmin

    41.5

    10 2030

    3538

    40

    40.8

    10 2030

    3538

    40

    40.9

    1020

    3035

    35

    38

    38

    40

    4040.5

    1020

    3035

    35

    38

    38

    40

    4040.4

    10 2030

    35

    35

    38

    38

    40

    4040.6

    10 2030

    35

    35

    38

    38

    40

    40

    41.0

    10 2030

    30

    35

    35

    38

    38

    40

    40

    η [%]

    Free passage = 25 mm

    Material variant G/G1/G2/GH/H for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H S P K

    44UK/XK ... (IE3) 4,0 ✘ ✘ ✘44U/X ... 4,0 ✘ ✘ -54U/Y(IE2)/Y 4,0 ✘ ✘ -54W ... 4,0 ✘ ✘ -54UK/XK ... (IE3) 5,5 ✘ ✘ ✘54U/X ... 5,5 ✘ ✘ -74U/Y(IE2)/Y 5,5 ✘ ✘ -74W ... 5,5 ✘ ✘ -

    Material variant C1/C2 for motor version U/X/W

    Motor size P2 [kW] Installation type

    C1/C2 S P K

    44U/X ... 4,0 ✘ ✘ -54W ... 4,0 ✘ ✘ -54U/X ... 5,5 ✘ ✘ -74W ... 5,5 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    20 Amarex KRT

  • Amarex KRT F 50-210, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42487s/3

    0 5 10 15 20 25 30Q [m³/h]

    0 50 100Q [US.gpm]

    0 20 40 60 80 100Q [IM.gpm]

    2

    4

    6

    8

    1

    9.5

    H [m] 10

    20

    30

    H [ft]

    0 2 4 6 8Q [l/s]

    0.4

    0.6

    0.8

    0.25

    P [kW]

    0.4

    0.6

    0.8

    1.0

    P [hp]

    0 5 10 15 20 25 30Q [m³/h]

    ø200

    ø200

    ø190

    ø190

    ø180

    ø180

    ø170

    ø170

    Qmin

    34.3

    15

    20

    25

    30

    30

    32

    32

    34

    3433.4

    15

    20

    25

    30

    30

    32

    3233.1

    15

    20

    25

    30

    30

    32

    3232.8

    15

    20

    25

    30

    30

    32

    32

    η [%]

    Free passage = 40 mm

    Material variant H/C1/C2 for motor version U/Y/W

    Motor size P2 [kW] Installation type

    H C1/C2 S P D

    014U ... 0,8 0,8 ✘ ✘ -014Y ... 0,8 0,8 ✘ ✘ -014W ... 0,8 0,8 ✘ ✘ -014U ... 1,3 1,1 ✘ ✘ -

    Motor size P2 [kW] Installation type

    H C1/C2 S P D

    014Y ... 1,3 1,1 ✘ ✘ -014W ... 1,3 1,1 ✘ ✘ -024U ... 2,4 2,2 ✘ ✘ -024Y ... 2,4 2,2 ✘ ✘ -024W ... 2,4 2,1 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 21

  • Amarex KRT F 65-210, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42412s/1

    0 10 20 30 40 50 60 70Q [m³/h]

    0 100 200 300Q [US.gpm]

    0 50 100 150 200 250Q [IM.gpm]

    2

    4

    6

    8

    10

    12

    1

    H [m] 10

    20

    30

    4

    38

    H [ft]

    0 5 10 15 20Q [l/s]

    0.5

    1.0

    1.5

    2.0

    0.1

    2.3

    P [kW] 1

    2

    3

    P [hp]

    0 10 20 30 40 50 60 70Q [m³/h]

    ø195

    ø195

    ø190

    ø190

    ø185

    ø185

    ø175

    ø175

    ø157

    ø157

    ø140

    ø140

    Qmin

    42.4

    20

    30

    30

    35

    35

    40

    40

    43.8

    20

    30

    30

    35

    35

    40

    40

    43

    43

    44.8

    20

    30

    30

    35

    35

    40

    40

    43

    4344.8

    2030

    30

    35

    35

    40

    40

    43

    4343.0

    20

    3035

    40

    4041.3

    2030

    35

    35

    40

    40

    η [%]

    Free passage = 65 mm

    Material variant H/C1/C2 for motor version U/Y/W

    Motor size P2 [kW] Installation type

    H C1/C2 S P D

    014U ... 0,8 0,8 ✘ ✘ -014Y ... 0,8 0,8 ✘ ✘ -014W ... 0,8 0,8 ✘ ✘ -014U ... 1,3 1,1 ✘ ✘ -

    Motor size P2 [kW] Installation type

    H C1/C2 S P D

    014Y ... 1,3 1,1 ✘ ✘ -014W ... 1,3 1,1 ✘ ✘ -024U ... 2,4 2,2 ✘ ✘ -024Y ... 2,4 2,2 ✘ ✘ -024W ... 2,4 2,1 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    22 Amarex KRT

  • Amarex KRT F 80-210, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42414s/2

    0 20 40 60 80 100 120 140Q [m³/h]

    0 200 400 600Q [US.gpm]

    0 100 200 300 400 500Q [IM.gpm]

    0

    2

    4

    6

    8

    10

    12

    14

    15.5

    H [m]

    0

    20

    40

    H [ft]

    0 10 20 30Q [l/s]

    1

    2

    3

    0.2

    3.6

    P [kW] 2

    4

    P [hp]

    0 20 40 60 80 100 120 140Q [m³/h]

    ø210

    ø210

    ø207

    ø207

    ø190

    ø190

    ø185

    ø185

    ø175

    ø175

    ø158

    ø158

    Qmin

    52.1

    30

    40

    45

    485050

    49.8

    30

    30

    40

    40

    45

    45

    48

    4846.5

    30

    30

    40

    40

    45

    4541.8

    30

    30

    40

    4040.0

    30

    30

    4040

    36.1

    30

    30

    η [%]

    Free passage = 80 mm

    Material variant H/C1/C2 for motor version U/Y/W

    Motor size P2 [kW] Installation type

    H C1/C2 S P D

    014U ... 0,8 0,8 ✘ ✘ -014Y ... 0,8 0,8 ✘ ✘ -014W ... 0,8 0,8 ✘ ✘ -014U ... 1,3 1,1 ✘ ✘ -014Y ... 1,3 1,1 ✘ ✘ -014W ... 1,3 1,1 ✘ ✘ -

    Motor size P2 [kW] Installation type

    H C1/C2 S P D

    024U ... 2,4 2,2 ✘ ✘ -024Y ... 2,4 2,2 ✘ ✘ -024W ... 2,4 2,1 ✘ ✘ -034U ... 3,15 2,85 ✘ ✘ -034Y ... 3,15 2,85 ✘ ✘ -034W ... 3,15 2,55 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 23

  • Amarex KRT F 80-250, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42873s/2

    0 50 100 150 200Q [m³/h]

    0 200 400 600 800 1000Q [US.gpm]

    0 200 400 600 800Q [IM.gpm]

    0

    10

    20

    30

    H [m]

    0

    50

    H [ft]

    0 20 40 60Q [l/s]

    5

    10

    NPSHR

    [m]

    20

    10

    35

    NPSHR [ft]

    0

    5

    10

    15

    P [kW]

    0

    10

    20

    P [hp]

    0 50 100 150 200Q [m³/h]

    ø265

    ø265

    ø265

    ø260

    ø260

    ø260

    ø250

    ø250

    ø250

    ø249

    ø249

    ø249

    ø237

    ø237

    ø237

    ø210

    ø210

    ø210

    ø190

    ø190

    ø190

    Qmin

    58.558

    58

    56

    56

    54

    54

    50

    50

    403020

    57.5

    56

    56

    54

    54

    50

    50

    403020

    56.356

    56

    54

    54

    50

    50

    403020

    56.456

    56

    54

    54

    50

    50

    403020

    55.2

    54

    54

    50

    50

    40

    40

    3020

    53.7

    50

    50

    40

    40

    30

    30

    20

    52.850

    50

    40

    40

    30

    30

    20

    η [%]

    Free passage = 76 mm

    Material variant G/G1/G2/GH for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/G2/GH S P K D H

    44UK/XK(IE3) 4,0 ✘ ✘ ✘ ✘ ✘44U/X ... 4,0 ✘ ✘ - - -54U/Y(IE2)/Y 4,0 ✘ ✘ - - -54W ... 4,0 ✘ ✘ - - -54UK/XK(IE3) 5,5 ✘ ✘ ✘ ✘ ✘54U/X ... 5,5 ✘ ✘ - - -74U/Y(IE2)/Y 5,5 ✘ ✘ - - -74W ... 5,5 ✘ ✘ - - -74UK/XK(IE3) 7,5 ✘ ✘ ✘ ✘ ✘74U/X ... 7,5 ✘ ✘ - - -114U/Y(IE3)/Y 7,5 ✘ ✘ - - -114W ... 7,5 ✘ ✘ - - -164U/Y(IE3)/Y 10,5 ✘ ✘ - - -114U/X ... 11,8 ✘ ✘ - - -164W ... 11,8 ✘ ✘ - - -214U/Y(IE3)/Y 15,0 ✘ ✘ - - -214W ... 16,0 ✘ ✘ - - -164U/X ... 16,0 ✘ ✘ - - -

    Material variant H/C1/C2 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    H C1/C2 S P K

    44UK/XK(IE3) 4,0 - ✘ ✘ ✘44U/X ... 4,0 4,0 ✘ ✘ -54U/Y(IE2)/Y 4,0 - ✘ ✘ -54W ... 4,0 4,0 ✘ ✘ -54UK/XK(IE3) 5,5 - ✘ ✘ ✘54U/X ... 5,5 5,5 ✘ ✘ -74U/Y(IE2)/Y 5,5 - ✘ ✘ -74W ... 5,5 5,5 ✘ ✘ -74UK/XK(IE3) 7,5 - ✘ ✘ ✘74U/X ... 7,5 7,5 ✘ ✘ -114U/Y(IE3)/Y 7,5 - ✘ ✘ -114W ... 7,5 7,5 ✘ ✘ -164U/Y(IE3)/Y 10,5 - ✘ ✘ -114U/X ... 11,8 11,8 ✘ ✘ -164W ... 11,8 11,8 ✘ ✘ -214U/Y(IE3)/Y 15,0 - ✘ ✘ -214W ... 16,0 14,0 ✘ ✘ -164U/X ... 16,0 16,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    24 Amarex KRT

  • Amarex KRT F 100-250, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K41971s/5

    0 50 100 150 200Q [m³/h]

    0 200 400 600 800Q [US.gpm]

    0 200 400 600 800Q [IM.gpm]

    0

    5

    10

    15

    20

    25

    H [m]

    0

    20

    40

    60

    80

    H [ft]

    0 20 40 60Q [l/s]

    5

    2

    9

    NPSHR

    [m]

    20

    10

    NPSHR [ft]

    5

    10

    15

    P [kW]

    10

    20

    P [hp]

    0 50 100 150 200Q [m³/h]

    ø265

    ø265

    ø265

    ø260

    ø260

    ø260

    ø249

    ø249

    ø249

    ø237

    ø237

    ø237

    ø200

    ø200

    ø200

    Qmin

    55.255

    55

    54

    54

    525050

    4539

    302010

    52.8

    52

    52

    50

    50

    45

    45

    393020

    10

    51.9

    50

    50

    45

    45

    39

    39

    302010

    50.750

    50

    45

    45

    39

    39

    30

    30

    2010

    45.745

    45

    39

    39

    30

    30

    2010

    η [%]

    Free passage = 100 mm

    Material variant G/G1/G2/GH for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/G2/GH S P K D H

    44UK/XK(IE3) 4,0 ✘ ✘ ✘ ✘ ✘44U/X ... 4,0 ✘ ✘ - - -54U/Y(IE2)/Y 4,0 ✘ ✘ - - -54W ... 4,0 ✘ ✘ - - -54UK/XK(IE3) 5,5 ✘ ✘ ✘ ✘ ✘54U/X ... 5,5 ✘ ✘ - - -74U/Y(IE2)/Y 5,5 ✘ ✘ - - -74W ... 5,5 ✘ ✘ - - -74UK/XK(IE3) 7,5 ✘ ✘ ✘ ✘ ✘74U/X ... 7,5 ✘ ✘ - - -114U/Y(IE3)/Y 7,5 ✘ ✘ - - -114W ... 7,5 ✘ ✘ - - -164U/Y(IE3)/Y 10,5 ✘ ✘ - - -114U/X ... 11,8 ✘ ✘ - - -164W ... 11,8 ✘ ✘ - - -214U/Y(IE3)/Y 15,0 ✘ ✘ - - -214W ... 16,0 ✘ ✘ - - -164U/X ... 16,0 ✘ ✘ - - -

    Material variant H/C1/C2 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    H C1/C2 S P K

    44UK/XK(IE3) 4,0 - ✘ ✘ ✘44U/X ... 4,0 4,0 ✘ ✘ -54U/Y(IE2)/Y 4,0 - ✘ ✘ -54W ... 4,0 4,0 ✘ ✘ -54UK/XK(IE3) 5,5 - ✘ ✘ ✘54U/X ... 5,5 5,5 ✘ ✘ -74U/Y(IE2)/Y 5,5 - ✘ ✘ -74W ... 5,5 5,5 ✘ ✘ -74UK/XK(IE3) 7,5 - ✘ ✘ ✘74U/X ... 7,5 7,5 ✘ ✘ -114U/Y(IE3)/Y 7,5 - ✘ ✘ -114W ... 7,5 7,5 ✘ ✘ -164U/Y(IE3)/Y 10,5 - ✘ ✘ -114U/X ... 11,8 11,8 ✘ ✘ -164W ... 11,8 11,8 ✘ ✘ -214U/Y(IE3)/Y 15,0 - ✘ ✘ -214W ... 16,0 14,0 ✘ ✘ -164U/X ... 16,0 16,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 25

  • Amarex KRT F 100-315, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42267s/3

    0 20 40 60 80 100 120 140 160 180Q [m³/h]

    0 200 400 600 800Q [US.gpm]

    0 200 400 600Q [IM.gpm]

    20

    22

    24

    26

    28

    30

    32

    34

    36

    38

    H [m]

    80

    100

    120

    H [ft]

    0 10 20 30 40 50Q [l/s]

    10

    15

    20

    25

    7

    27

    P [kW]

    10

    20

    30

    P [hp]

    0 20 40 60 80 100 120 140 160 180Q [m³/h]

    ø310

    ø310

    ø295

    ø295

    ø280

    ø280

    ø270

    ø270

    Qmin

    50.9

    10

    20

    30

    36

    40

    4345

    48

    48.4

    10

    20

    30

    36

    40

    4345

    48

    46.1

    10

    20

    30

    36

    40

    4343

    4545

    45.4

    1020

    30

    36

    40

    43

    4545

    η [%]

    Free passage = 100 mm

    Material variant G/G1/G2/GH/H/C1/C2 for motor versionU/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H C1/C2 S P D

    114U/X ... 11,8 11,8 ✘ ✘ -164W ... 11,8 11,8 ✘ ✘ -214U/Y(IE3)/Y 15,0 - ✘ ✘ -214W ... 16,0 14,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H C1/C2 S P D

    164U/X ... 16,0 16,0 ✘ ✘ -294U/Y(IE3)/Y 19,0 - ✘ ✘ -234U/X ... 21,0 19,0 ✘ ✘ -294W ... 23,0 21,0 ✘ ✘ -294U/X ... 27,0 25,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    26 Amarex KRT

  • Amarex KRT F 100-401, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42258s/3

    0 20 40 60 80 100 120 140 160 180Q [m³/h]

    0 200 400 600 800Q [US.gpm]

    0 200 400 600Q [IM.gpm]

    30

    35

    40

    45

    50

    55

    H [m]

    100

    120

    140

    160

    180

    H [ft]

    0 10 20 30 40 50Q [l/s]

    5

    1

    9

    NPSHR

    [m]

    20

    5

    NPSHR [ft]

    20

    30

    40

    P [kW]

    20

    40

    P [hp]

    0 20 40 60 80 100 120 140 160 180Q [m³/h]

    ø390

    ø390

    ø390

    ø370

    ø370

    ø355

    ø355

    ø340

    ø340

    ø325

    ø325

    ø325

    Qmin

    50.948

    45

    403636

    30

    2010

    50.448

    45

    403636

    30

    2010

    50.04848

    45

    40403636

    30

    2010

    49.54845

    4036

    3020

    10

    49.84845

    4036

    3020

    10

    η [%]

    Free passage = 100 mm

    Material variant G/G1/G2/GH/H/C1/C2 for motor versionU/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H C1/C2 S P D

    234U/X ... 21,0 19,0 ✘ ✘ -294W ... 23,0 21,0 ✘ ✘ -294U/X ... 27,0 25,0 ✘ ✘ -354U/Y(IE3)/Y 30,0 - ✘ ✘ -354W ... 34,0 28,0 ✘ ✘ -504U/Y(IE3)/Y 36,0 - ✘ ✘ -354U/X ... 38,0 34,0 ✘ ✘ -504W ... 38,0 34,0 ✘ ✘ -504U/X ... 48,0 42,0 ✘ ✘ -654W ... 48,0 42,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H C1/C2 S P D

    654U/Y(IE3)/Y 48,0 - ✘ ✘ -654U/X ... 62,0 55,0 ✘ ✘ -

    Material variant G/G1/G2 for motor version UN/XN

    Motor size P2 [kW] Installation type

    G/G1/G2 S P K D

    S/P K/D

    354UN/XN ... - 32,0 - - ✘ ✘504UN/XN ... - 42,0 - - ✘ ✘654UN/XN ... - 55,0 - - ✘ ✘

    Waste WaterSubmersible Motor Pump

    Amarex KRT 27

  • Amarex KRT F 150-401, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42564s/2

    0 100 200 300 400 500Q [m³/h]

    0 500 1000 1500 2000Q [US.gpm]

    0 500 1000 1500 2000Q [IM.gpm]

    10

    20

    30

    40

    H [m]

    50

    100

    150

    H [ft]

    0 50 100 150Q [l/s]

    4

    6

    8

    NPSHR

    [m]

    20

    14

    26

    NPSHR [ft]

    20

    40

    60

    80

    P [kW]

    50

    100

    P [hp]

    0 100 200 300 400 500Q [m³/h]

    ø390

    ø390

    ø390

    ø360

    ø360

    ø360

    ø330

    ø330

    ø330

    ø300

    ø300

    ø300

    ø270

    ø270

    ø270

    Qmin

    52.5

    505048

    4540

    353020

    50.550

    50

    48

    48

    454040

    353020

    48.8

    48

    48

    45454040

    353020

    44.5

    40

    40

    353020

    41.840

    40

    35

    35

    303020

    η [%]

    Free passage = 135 mm

    Material variant G/G1/GH/H/C1/C2 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/GH/H C1/C2 S P K D

    234U/X ... 21,0 19,0 ✘ ✘ - -294W ... 23,0 21,0 ✘ ✘ - -294U/X ... 27,0 25,0 ✘ ✘ - -354U/Y(IE3)/Y 30,0 - ✘ ✘ - -354W ... 34,0 28,0 ✘ ✘ - -504U/Y(IE3)/Y 36,0 - ✘ ✘ - -354U/X ... 38,0 34,0 ✘ ✘ - -504W ... 38,0 34,0 ✘ ✘ - -504U/X ... 48,0 42,0 ✘ ✘ - -654W ... 48,0 42,0 ✘ ✘ - -654U/Y(IE3)/Y 48,0 - ✘ ✘ - -654U/X ... 62,0 55,0 ✘ ✘ - -

    Material variant G/G1/GH/H/C1/C2 for motor versionUN/XN/YN/WN

    Motor size P2 [kW]

    G/G1/GH/H G/G1/G2 C1/C2

    S/P K/D S/P

    354UN/XN ... - 32,0 -504UN/XN ... - 42,0 -654UN/XN ... - 55,0 -804UN/YN(IE2)/YN 62,0 - -804WN ... 75,0 - 60,0804UN/XN ... 80,0 75,0 70,0954UN/YN(IE2)/YN 80,0 - -1104UN/YN(IE2)/YN 88,0 - -954WN ... 90,0 - 70,0954UN/XN ... 95,0 90,0 80,0

    Waste WaterSubmersible Motor Pump

    28 Amarex KRT

  • Amarex KRT F 150-315, n = 960 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K41977s/4

    0 50 100 150 200 250 300 350 400Q [m³/h]

    0 500 1000 1500Q [US.gpm]

    0 500 1000 1500Q [IM.gpm]

    2

    4

    6

    8

    10

    12

    H [m]

    20

    40

    H [ft]

    0 20 40 60 80 100Q [l/s]

    5

    10

    NPSHR

    [m]

    20

    5

    35

    NPSHR [ft]

    5

    10

    P [kW]

    5

    10

    15

    P [hp]

    0 50 100 150 200 250 300 350 400Q [m³/h]

    ø290

    ø290

    ø290

    ø279

    ø279

    ø279

    ø275

    ø275

    ø275

    ø250

    ø250

    ø250

    Qmin

    53.8

    52

    52

    50

    50

    48

    48

    45

    45

    4030

    51.3

    50

    50

    48

    48

    45

    45

    40

    40

    30

    48.348

    48

    45

    45

    40

    40

    30

    43.4

    40

    40

    30

    η [%]

    Free passage = 120 mm

    Material variant G/G1/G2/GH for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/G2/GH S P K D H

    46UK/XK(IE3) 4,8 ✘ ✘ ✘ ✘ ✘46U/X ... 4,8 ✘ ✘ - - -66U/Y(IE3)/Y 4,8 ✘ ✘ - - -66W ... 4,8 ✘ ✘ - - -66UK/XK(IE3) 6,0 ✘ ✘ ✘ ✘ ✘66U/X ... 6,0 ✘ ✘ - - -96U/Y(IE3)/Y 6,5 ✘ ✘ - - -96W ... 6,5 ✘ ✘ - - -96U/X ... 9,0 ✘ ✘ - - -126U/Y(IE3)/Y 9,0 ✘ ✘ - - -126W ... 9,0 ✘ ✘ - - -196U/Y(IE2)/Y 12,0 ✘ ✘ - - -196W ... 13,0 ✘ ✘ - - -

    Material variant H/C1/C2 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    H C1/C2 S P K

    46UK/XK(IE3) 4,8 - ✘ ✘ ✘46U/X ... 4,8 4,8 ✘ ✘ -66U/Y(IE3)/Y 4,8 - ✘ ✘ -66W ... 4,8 4,5 ✘ ✘ -66UK/XK(IE3) 6,0 - ✘ ✘ ✘66U/X ... 6,0 5,7 ✘ ✘ -96U/Y(IE3)/Y 6,5 - ✘ ✘ -96W ... 6,5 6,5 ✘ ✘ -96U/X ... 9,0 8,7 ✘ ✘ -126U/Y(IE3)/Y 9,0 - ✘ ✘ -126W ... 9,0 9,0 ✘ ✘ -196U/Y(IE2)/Y 12,0 - ✘ ✘ -196W ... 13,0 11,5 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 29

  • Amarex KRT F 150-401, n = 960 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42563s/2

    0 100 200 300 400 500Q [m³/h]

    0 500 1000 1500 2000Q [US.gpm]

    0 500 1000 1500 2000Q [IM.gpm]

    5

    10

    15

    20

    H [m]

    20

    40

    60

    H [ft]

    0 50 100 150Q [l/s]

    2

    4

    NPSHR

    [m] 10

    6

    16

    NPSHR [ft]

    0

    10

    20

    30

    P [kW]

    0

    20

    40

    P [hp]

    0 100 200 300 400 500Q [m³/h]

    ø390

    ø390

    ø390

    ø360

    ø360

    ø360

    ø330

    ø330

    ø330

    ø300

    ø300

    ø300

    ø270

    ø270

    ø270

    Qmin

    51.6

    50

    50

    48

    48

    45

    45

    40353530

    20

    49.5

    48

    48

    45

    45

    40

    40

    353020

    47.8

    45

    45

    40

    40

    35

    35

    3020

    43.5

    40

    40

    35

    35

    30

    30

    20

    40.840

    40

    35

    35

    30

    30

    20

    η [%]

    Free passage = 135 mm

    Material variant G/G1/G2/GH/H/C1/C2 for motor versionU/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H

    C1/C2 S P K D

    206W ... 13,0 - ✘ ✘ - -206U/X ... 18,0 - ✘ ✘ - -266U/Y(IE2)/Y 18,0 - ✘ ✘ - -266W ... 18,0 - ✘ ✘ - -266U/X ... 24,0 - ✘ ✘ - -326U/Y(IE3)/Y 24,0 - ✘ ✘ - -326W ... 24,0 22,0 ✘ ✘ - -326U/X ... 30,0 27,0 ✘ ✘ - -406U/Y(IE3)/Y 30,0 - ✘ ✘ - -406W ... 30,0 27,0 ✘ ✘ - -

    Motor size P2 [kW] Installation type

    G/G1/G2/GH/H

    C1/C2 S P K D

    406U/X ... 40,0 36,0 ✘ ✘ - -506W ... 40,0 36,0 ✘ ✘ - -506U/Y(IE3)/Y 40,0 - ✘ ✘ - -

    Material variant G/G1/G2/GH/H for motor version UN/XN

    Motor size P2 [kW]

    G/G1/G2/GH/H G/G1/G2

    S/P K/D

    326UN/XN ... - 24,0406UN/XN ... - 32,0

    Waste WaterSubmersible Motor Pump

    30 Amarex KRT

  • E impeller

    Amarex KRT E 80-250, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42578s/3

    0 50 100 150 200Q [m³/h]

    0 200 400 600 800 1000Q [US.gpm]

    0 200 400 600 800Q [IM.gpm]

    10

    20

    30

    H [m]

    50

    100

    H [ft]

    0 20 40 60Q [l/s]

    5

    10

    NPSHR

    [m]

    20

    40

    NPSHR [ft]

    2

    4

    6

    8

    10

    P [kW]

    5

    10

    15

    P [hp]

    0 50 100 150 200Q [m³/h]

    ø270

    ø270

    ø270

    ø255

    ø255

    ø255

    ø240

    ø240

    ø240

    ø225

    ø225

    ø225

    Qmin

    76.376

    76

    74.5

    74.5

    73

    73

    71

    71

    68

    68

    6050

    40

    75.174.5

    74.5

    73

    73

    71

    71

    68

    68

    60

    60

    5040

    73.873

    73

    71

    71

    68

    68

    60

    60

    5040

    71.471 71

    68

    68

    60

    60

    5040

    η [%]

    Free passage = 76 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P K D H

    54U/X ... 5,5 ✘ ✘ - - -54UK/XK(IE3) 5,5 ✘ ✘ ✘ ✘ ✘74U/Y(IE2)/Y 5,5 ✘ ✘ - - -74W ... 5,5 ✘ ✘ - - -74U/X ... 7,5 ✘ ✘ - - -

    Motor size P2 [kW] Installation type

    G S P K D H

    74UK/XK(IE3) 7,5 ✘ ✘ ✘ ✘ ✘114U/Y(IE3)/Y 7,5 ✘ ✘ - - -114W ... 7,5 ✘ ✘ - - -164U/Y(IE3)/Y 10,5 ✘ ✘ - - -114U/X ... 11,8 ✘ ✘ - - -164W ... 11,8 ✘ ✘ - - -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 31

  • Amarex KRT E 100-250, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42003s/4

    0 50 100 150 200Q [m³/h]

    0 200 400 600 800Q [US.gpm]

    0 200 400 600 800Q [IM.gpm]

    5

    10

    15

    20

    H [m]

    20

    40

    60

    H [ft]

    0 20 40 60Q [l/s]

    4

    6

    NPSHR

    [m]

    10

    20

    NPSHR [ft]

    2

    4

    6

    8

    P [kW]

    5

    10

    P [hp]

    0 50 100 150 200Q [m³/h]

    ø245

    ø245

    ø220

    ø220

    ø202

    ø202

    Qmin

    76.9

    76

    76

    74

    74

    72

    72

    706865

    6055

    50

    70.470

    70

    68

    68

    656560

    5550

    61.960

    60

    55

    55

    50

    η [%]

    Free passage = 90 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P K D H

    54U/X ... 5,5 ✘ ✘ - - -54UK/XK(IE3) 5,5 ✘ ✘ ✘ ✘ ✘74U/Y(IE2)/Y 5,5 ✘ ✘ - - -74W ... 5,5 ✘ ✘ - - -

    Motor size P2 [kW] Installation type

    G S P K D H

    74U/X ... 7,5 ✘ ✘ - - -74UK/XK(IE3) 7,5 ✘ ✘ ✘ ✘ ✘114U/Y(IE3)/Y 7,5 ✘ ✘ - - -114W ... 7,5 ✘ ✘ - - -

    Waste WaterSubmersible Motor Pump

    32 Amarex KRT

  • Amarex KRT E 100-315, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42262s/2

    0 50 100 150 200 250 300Q [m³/h]

    0 500 1000Q [US.gpm]

    0 200 400 600 800 1000 1200Q [IM.gpm]

    10

    15

    20

    25

    30

    35

    40

    45

    H [m] 40

    60

    80

    100

    120

    140

    H [ft]

    0 20 40 60 80Q [l/s]

    10

    20

    30

    2

    P [kW] 20

    40

    P [hp]

    0 50 100 150 200 250 300Q [m³/h]

    ø330

    ø330

    ø315

    ø315

    ø300

    ø300

    ø286

    ø286

    ø262

    ø262

    Qmin

    75.0

    5560

    65

    70

    7373

    75.1

    5560

    6565

    70

    73

    74.1

    5560

    65

    70

    73

    7374.6

    5560

    65

    7070

    7373

    73.8

    556060

    65

    70

    73

    73

    η [%]

    Free passage = 100 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P D

    164U/Y(IE3)/Y 10,5 ✘ ✘ -114U/X ... 11,8 ✘ ✘ -164W ... 11,8 ✘ ✘ -214U/Y(IE3)/Y 15,0 ✘ ✘ -214W ... 16,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G S P D

    164U/X ... 16,0 ✘ ✘ -294U/Y(IE3) 19,0 ✘ ✘ -294Y ... 21,0 ✘ ✘ -234U/X ... 23,0 ✘ ✘ -294W ... 27,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 33

  • Amarex KRT E 100-401, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42271s/2

    0 50 100 150 200 250Q [m³/h]

    0 200 400 600 800 1000Q [US.gpm]

    0 200 400 600 800Q [IM.gpm]

    30

    40

    50

    H [m]

    100

    150

    H [ft]

    0 20 40 60Q [l/s]

    5

    6

    NPSHR

    [m]

    15

    20

    NPSHR [ft]

    20

    25

    30

    35

    P [kW]

    30

    40

    P [hp]

    0 50 100 150 200 250Q [m³/h]

    ø412

    ø412

    ø412

    ø389

    ø389

    ø389

    Qmin

    57.3

    56.556.5

    54.552

    494946

    40

    55.0

    54.554.5

    52

    494946

    40

    η [%]

    Free passage = 80 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P K D

    354U/Y(IE3)/Y 30,0 ✘ ✘ - -354W ... 34,0 ✘ ✘ - -504U/Y(IE3)/Y 36,0 ✘ ✘ - -354U/X ... 38,0 ✘ ✘ - -504W ... 38,0 ✘ ✘ - -504U/X ... 48,0 ✘ ✘ - -654W ... 48,0 ✘ ✘ - -

    Motor size P2 [kW] Installation type

    G S P K D

    654U/Y(IE3)/Y 48,0 ✘ ✘ - -654U/X ... 62,0 ✘ ✘ - -

    Material variant G for motor version UN/XN

    Motor size P2 [kW] Installation type

    G S P K D

    S/P K/D

    354UN/XN ... - 32,0 - - ✘ ✘504UN/XN ... - 42,0 - - ✘ ✘

    Waste WaterSubmersible Motor Pump

    34 Amarex KRT

  • Amarex KRT E 150-315, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42265s/2

    0 50 100 150 200 250 300 350 400Q [m³/h]

    0 500 1000 1500Q [US.gpm]

    0 500 1000Q [IM.gpm]

    2

    4

    6

    8

    10

    12

    14

    16

    1

    17

    H [m]

    20

    40

    H [ft]

    0 20 40 60 80 100Q [l/s]

    2

    4

    6

    8

    1

    9.5

    P [kW]

    5

    10

    P [hp]

    0 50 100 150 200 250 300 350 400Q [m³/h]

    ø320

    ø320

    ø305

    ø305

    ø295

    ø295

    ø275

    ø275

    ø254

    ø254

    Qmin

    77.7

    6065

    65

    70

    70

    75

    7576.2

    60

    60

    65

    65

    70

    70

    75

    7574.6

    60

    60

    65

    65

    70

    70

    73.1

    60

    60

    65

    65

    70

    7071.4

    60

    60

    65

    65

    70

    70

    η [%]

    Free passage = 110 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P D

    114U/X ... 11,8 ✘ ✘ -164W ... 11,8 ✘ ✘ -214U/Y(IE3)/Y 15,0 ✘ ✘ -214W ... 16,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G S P D

    164U/X ... 16,0 ✘ ✘ -294U/Y(IE3) 19,0 ✘ ✘ -294Y ... 21,0 ✘ ✘ -234U/X ... 23,0 ✘ ✘ -294W ... 27,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 35

  • Amarex KRT E 150-401, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42562s/2

    0 100 200 300 400 500 600 700Q [m³/h]

    0 1000 2000 3000Q [US.gpm]

    0 500 1000 1500 2000 2500Q [IM.gpm]

    20

    40

    60

    5

    70

    H [m] 100

    200

    H [ft]

    0 50 100 150Q [l/s]

    5

    10

    2

    13

    NPSHR

    [m]

    20

    40

    NPSHR [ft]

    20

    40

    60

    10

    75

    P [kW]

    50

    100

    P [hp]

    0 100 200 300 400 500 600 700Q [m³/h]

    ø407

    ø407

    ø407

    ø386

    ø386

    ø386

    ø384

    ø384

    ø384

    ø370

    ø370

    ø370

    ø348

    ø348

    ø348

    Qmin

    75.274

    74

    737068

    6460

    72.0

    70

    70

    6864

    6060

    69.268

    68

    64

    64

    6060

    70.270 70

    68

    68

    64

    64

    60

    60

    69.768

    68

    64

    64

    60

    60

    η [%]

    Free passage = 115 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P K D

    354U/Y(IE3)/Y 30,0 ✘ ✘ - -354W ... 34,0 ✘ ✘ - -504U/Y(IE3)/Y 36,0 ✘ ✘ - -354U/X ... 38,0 ✘ ✘ - -504W ... 38,0 ✘ ✘ - -504U/X ... 48,0 ✘ ✘ - -654W ... 48,0 ✘ ✘ - -654U/Y(IE3)/Y 48,0 ✘ ✘ - -654U/X ... 62,0 ✘ ✘ - -

    Material variant G for motor version UN/XN/YN/WN

    Motor size P2 [kW] Installation type

    G S P K D

    S/P K/D

    354UN/XN ... - 32,0 - - ✘ ✘504UN/XN ... - 42,0 - - ✘ ✘654UN/XN ... - 55,0 - - ✘ ✘804UN/YN(IE2)/YN 62,0 - ✘ ✘ - -804WN ... 75,0 - ✘ ✘ - -804UN/XN ... 80,0 75,0 ✘ ✘ ✘ ✘954UN/YN(IE2)/YN 80,0 - ✘ ✘ - -

    Waste WaterSubmersible Motor Pump

    36 Amarex KRT

  • Amarex KRT E 200-401, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42260s/3

    0 200 400 600 800 1000 1200Q [m³/h]

    0 1000 2000 3000 4000 5000Q [US.gpm]

    0 1000 2000 3000 4000Q [IM.gpm]

    0

    20

    40

    60

    H [m]

    0

    100

    H [ft]

    0 100 200 300Q [l/s]

    5

    10

    2

    12

    NPSHR

    [m]

    20

    10

    35

    NPSHR [ft]

    20

    40

    60

    80

    P [kW]

    50

    100

    P [hp]

    0 200 400 600 800 1000 1200Q [m³/h]

    ø400

    ø400

    ø400

    ø373

    ø373

    ø373

    ø351

    ø351

    ø351

    ø319

    ø319

    ø319

    Qmin

    72.0

    70

    70

    686865

    605555

    71.0

    70

    70

    68

    68

    656060

    5555

    70.670

    70

    68

    68

    6560

    55

    69.068

    68

    65

    65

    60605555

    η [%]

    Free passage = 120 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P K D

    354U/Y(IE3)/Y 30,0 ✘ ✘ - -354W ... 34,0 ✘ ✘ - -504U/Y(IE3)/Y 36,0 ✘ ✘ - -354U/X ... 38,0 ✘ ✘ - -504W ... 38,0 ✘ ✘ - -504U/X ... 48,0 ✘ ✘ - -654W ... 48,0 ✘ ✘ - -654U/Y(IE3)/Y 48,0 ✘ ✘ - -654U/X ... 62,0 ✘ ✘ - -

    Material variant G for motor version UN/XN/YN/WN

    Motor size P2 [kW] Installation type

    G S P K D

    S/P K/D

    354UN/XN ... - 32,0 - - ✘ ✘504UN/XN ... - 42,0 - - ✘ ✘654UN/XN ... - 55,0 - - ✘ ✘804UN/YN(IE2)/YN 62,0 - ✘ ✘ - -804WN ... 75,0 - ✘ ✘ - -804UN/XN ... 80,0 75,0 ✘ ✘ ✘ ✘954UN/YN(IE2)/YN 80,0 - ✘ ✘ - -1104UN/YN(IE2)/YN 88,0 - ✘ ✘ - -954WN ... 88,0 - ✘ ✘ - -954UN/XN ... 95,0 90,0 ✘ ✘ ✘ ✘1104WN ... 95,0 - ✘ ✘ - -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 37

  • Amarex KRT E 150-315, n = 960 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42265s/2

    0 50 100 150 200 250 300 350 400Q [m³/h]

    0 500 1000 1500Q [US.gpm]

    0 500 1000Q [IM.gpm]

    5

    10

    15

    H [m]

    20

    40

    H [ft]

    0 20 40 60 80 100Q [l/s]

    2

    4

    NPSHR

    [m] 10

    6

    14

    NPSHR [ft]

    2

    4

    6

    8

    P [kW]

    5

    10

    P [hp]

    0 50 100 150 200 250 300 350 400Q [m³/h]

    ø320

    ø320

    ø320

    ø305

    ø305

    ø295

    ø295

    ø275

    ø275

    ø254

    ø254

    ø254

    Qmin

    77.7

    76

    76

    74

    74

    70

    70

    66

    66

    6055

    76.276 76

    74

    74

    70

    70

    66

    66

    60

    60

    55

    74.674

    74

    70

    70

    66

    66

    60

    60

    55

    55

    73.1

    70

    70

    66

    66

    60

    60

    55

    71.4

    70

    70

    66

    66

    60

    60

    55

    η [%]

    Free passage = 110 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P D H

    46U/X ... 4,8 ✘ ✘ - -46UK/XK(IE3) 4,8 ✘ ✘ ✘ ✘66U/Y(IE3)/Y 4,8 ✘ ✘ - -66W ... 4,8 ✘ ✘ - -66U/X ... 6,0 ✘ ✘ - -66UK/XK(IE3) 6,0 ✘ ✘ ✘ ✘

    Motor size P2 [kW] Installation type

    G S P D H

    96U/X ... 6,5 ✘ ✘ - -96W ... 6,5 ✘ ✘ - -96U/X ... 9,0 ✘ ✘ - -126U/Y(IE3)/Y 9,0 ✘ ✘ - -126W ... 9,0 ✘ ✘ - -196U/Y(IE2)/Y 12,0 ✘ ✘ - -126U/X ... 12,5 ✘ ✘ - -

    Waste WaterSubmersible Motor Pump

    38 Amarex KRT

  • Amarex KRT E 150-401, n = 960 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42561s/2

    0 100 200 300 400 500Q [m³/h]

    0 500 1000 1500 2000Q [US.gpm]

    0 500 1000 1500 2000Q [IM.gpm]

    0

    10

    20

    30

    H [m]

    0

    50

    100

    H [ft]

    0 50 100 150Q [l/s]

    5

    1

    9

    NPSHR

    [m]

    20

    5

    NPSHR [ft]

    5

    10

    15

    20

    P [kW]

    10

    20

    30

    P [hp]

    0 100 200 300 400 500Q [m³/h]

    ø407

    ø407

    ø407

    ø386

    ø386

    ø386

    ø384

    ø384

    ø384

    ø370

    ø370

    ø370

    ø348

    ø348

    ø348

    Qmin

    74.774

    74

    72.5

    72.5

    70

    70

    68

    68

    64606055

    71.5

    70

    70

    68

    68

    64

    64

    606055

    68.768

    68

    64

    64

    60

    60

    55

    55

    69.768

    68

    64

    64

    60

    60

    55

    55

    69.268

    68

    64

    64

    60

    60

    55

    55

    η [%]

    Free passage = 115 - 140 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P K D

    206U/Y(IE2)/Y 12,0 ✘ ✘ - -206W ... 13,0 ✘ ✘ - -206U/X ... 18,0 ✘ ✘ - -266U/Y(IE2)/Y 18,0 ✘ ✘ - -

    Motor size P2 [kW] Installation type

    G S P K D

    266W ... 18,0 ✘ ✘ - -266U/X ... 24,0 ✘ ✘ - -326U/Y(IE3) / Y 24,0 ✘ ✘ - -326W ... 24,0 ✘ ✘ - -326UN/XN... 24,0 - - ✘ ✘

    Waste WaterSubmersible Motor Pump

    Amarex KRT 39

  • Amarex KRT E 200-401, n = 960 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42261s/3

    0 100 200 300 400 500 600 700Q [m³/h]

    0 1000 2000 3000Q [US.gpm]

    0 1000 2000Q [IM.gpm]

    0

    10

    20

    H [m]

    0

    50

    H [ft]

    0 50 100 150 200Q [l/s]

    2

    4

    NPSHR

    [m] 10

    4

    18

    NPSHR [ft]

    5

    10

    15

    20

    25

    P [kW]

    10

    20

    30

    P [hp]

    0 100 200 300 400 500 600 700Q [m³/h]

    ø400

    ø400

    ø400

    ø373

    ø373

    ø373

    ø351

    ø351

    ø351

    ø319

    ø319

    ø319

    Qmin

    70.270

    70

    68

    68

    65656060

    55

    69.2

    68

    68

    65656060

    55

    68.9

    68

    68

    65

    65

    606055

    67.2

    65

    65

    6055

    η [%]

    Free passage = 121 - 143 mm

    Material variant G for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G S P K D

    206U/Y(IE2)/Y 12,0 ✘ ✘ - -206W ... 13,0 ✘ ✘ - -206U/X ... 18,0 ✘ ✘ - -266U/Y(IE2)/Y 18,0 ✘ ✘ - -266W ... 18,0 ✘ ✘ - -266U/X ... 24,0 ✘ ✘ - -326U/Y(IE3)/Y 24,0 ✘ ✘ - -326W ... 24,0 ✘ ✘ - -326U/X 30,0 ✘ ✘ - -

    Motor size P2 [kW] Installation type

    G S P K D

    406W ... 30,0 ✘ ✘ - -406U/Y(IE3)/Y 30,0 ✘ ✘ - -

    Material variant G for motor version UN/XN

    Motor size P2 [kW] Installation type

    G S P K D

    326UN/XN ... 24,0 - - ✘ ✘406UN/XN ... 32,0 - - ✘ ✘

    Waste WaterSubmersible Motor Pump

    40 Amarex KRT

  • D impeller

    Amarex KRT D 80-315, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    V43097s/0

    0 50 100 150 200 250 300Q [m³/h]

    0 500 1000Q [US.gpm]

    0 200 400 600 800 1000 1200Q [IM.gpm]

    20

    40

    60

    80

    100

    110

    H [m] 100

    200

    300

    H [ft]

    0 20 40 60 80Q [l/s]

    20

    30

    40

    50

    12

    58

    P [kW]

    20

    40

    60

    P [hp]

    0 50 100 150 200 250 300Q [m³/h]

    ø260

    ø260

    ø250

    ø250

    ø242

    ø242

    ø230

    ø230

    Qmin

    68.2

    55

    6063

    63

    66

    66

    68

    6867.1

    55

    60

    60

    63

    63

    66

    66

    66.2

    5560

    60

    63

    63

    66

    6663.2

    55

    60

    60

    63

    63

    η [%]

    Free passage = 65 mm

    Material variant G/G1 for motor version U/X

    Motor size P2 [kW] Installation type

    G/G1 S P D

    372U/X ... 37,0 ✘ ✘ -552U/X ... 55,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 41

  • Amarex KRT D 100-315, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K43102s/1

    0 100 200 300 400Q [m³/h]

    0 500 1000 1500Q [US.gpm]

    0 500 1000 1500Q [IM.gpm]

    10

    20

    30

    40

    50

    60

    70

    2

    H [m] 50

    100

    150

    200

    H [ft]

    0 20 40 60 80 100 120Q [l/s]

    15

    20

    25

    30

    12

    33

    P [kW]

    20

    30

    40

    P [hp]

    0 100 200 300 400Q [m³/h]

    ø222

    ø222

    ø210

    ø210

    ø196

    ø196

    Qmax

    Qmin

    73.5

    5050

    6060

    65

    65

    70

    70

    72

    7268.0

    50

    60

    60

    65

    6562.6

    50

    60

    60

    η [%]

    Free passage = 75 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P D

    372Y ... 30,0 ✘ ✘ -372W ... 30,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1 S P D

    372U/X ... 37,0 ✘ ✘ -552U/X ... 55,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    42 Amarex KRT

  • Amarex KRT D 80-315, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    V43098s/0

    0 20 40 60 80 100 120 140 160 180Q [m³/h]

    0 200 400 600 800Q [US.gpm]

    0 200 400 600Q [IM.gpm]

    5

    10

    15

    20

    25

    H [m]

    20

    40

    60

    80

    H [ft]

    0 10 20 30 40 50Q [l/s]

    5

    10

    NPSHR

    [m]

    20

    5

    30

    NPSHR [ft]

    2

    4

    6

    P [kW]

    4

    6

    8

    10

    P [hp]

    0 20 40 60 80 100 120 140 160 180Q [m³/h]

    ø260

    ø260

    ø260

    ø250

    ø250

    ø250

    ø242

    ø242

    ø242

    ø230

    ø230

    ø230

    Qmin

    69.2

    68

    68

    66

    66

    63

    63

    60

    60

    55

    55

    68.168 68

    66

    66

    63

    63

    60

    60

    55

    55

    67.2

    66

    66

    63

    63

    60

    60

    55

    64.1

    63

    63

    60

    60

    55

    η [%]

    Free passage = 65 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    54U/X ... 5,5 ✘ ✘ - - -54UK/XK(IE3) 5,5 ✘ ✘ ✘ ✘ ✘74U/Y(IE2)/Y 5,5 ✘ ✘ - - -74W ... 5,5 ✘ ✘ - - -74U/X ... 7,5 ✘ ✘ - - -

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    74UK/XK(IE3) 7,5 ✘ ✘ ✘ ✘ ✘114U/Y(IE3)/Y 7,5 ✘ ✘ - - -114W ... 7,5 ✘ ✘ - - -164U/Y(IE3)/Y 10,5 ✘ ✘ - - -114U/X ... 11,8 ✘ ✘ - - -164W ... 11,8 ✘ ✘ - - -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 43

  • Amarex KRT D 100-251, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K43118s/1

    0 50 100 150 200 250 300 350Q [m³/h]

    0 500 1000 1500Q [US.gpm]

    0 200 400 600 800 1000 1200Q [IM.gpm]

    5

    10

    15

    20

    25

    H [m]

    20

    40

    60

    80

    H [ft]

    0 20 40 60 80 100Q [l/s]

    2

    4

    6

    NPSHR

    [m]

    10

    2

    18

    NPSHR [ft]

    4

    6

    8

    P [kW]

    6

    8

    10

    12

    P [hp]

    0 50 100 150 200 250 300 350Q [m³/h]

    ø265

    ø265

    ø265

    ø250

    ø250

    ø250

    ø234

    ø234

    ø234

    Qmin

    77.076.5

    76.5

    75

    75

    70

    70

    60

    60

    74.1

    70

    70

    60

    60

    71.6

    70

    70

    60

    60

    η [%]

    Free passage = 76 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    54U/X ... 5,5 ✘ ✘ - - -54UK/XK(IE3) 5,5 ✘ ✘ ✘ ✘ ✘74U/Y(IE2)/Y 5,5 ✘ ✘ - - -74W ... 5,5 ✘ ✘ - - -74U/X ... 7,5 ✘ ✘ - - -

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    74UK/XK(IE3) 7,5 ✘ ✘ ✘ ✘ ✘114U/Y(IE3)/Y 7,5 ✘ ✘ - - -114W ... 7,5 ✘ ✘ - - -164U/Y(IE3)/Y 10,5 ✘ ✘ - - -114U/X ... 11,8 ✘ ✘ - - -164W ... 11,8 ✘ ✘ - - -

    Waste WaterSubmersible Motor Pump

    44 Amarex KRT

  • Amarex KRT D 100-316, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K43116s/1

    0 50 100 150 200 250 300 350 400Q [m³/h]

    0 500 1000 1500Q [US.gpm]

    0 500 1000Q [IM.gpm]

    5

    10

    15

    20

    25

    30

    35

    3

    37

    H [m]

    20

    40

    60

    80

    100

    120

    H [ft]

    0 20 40 60 80 100Q [l/s]

    5

    10

    15

    20

    P [kW] 10

    20

    P [hp]

    0 50 100 150 200 250 300 350 400Q [m³/h]

    ø306

    ø306

    ø288

    ø288

    ø278

    ø278

    ø270

    ø270

    Qmin

    78.9

    606065

    65

    70

    70

    75

    75

    78

    7874.8

    606065

    65

    70

    70

    70.7

    60

    60

    65

    65

    70

    70

    66.6

    60

    60

    65

    65

    η [%]

    Free passage = 85 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P D

    114U/X ... 11,8 ✘ ✘ -164W ... 11,8 ✘ ✘ -214U/Y(IE3)/Y 15,0 ✘ ✘ -214W ... 16,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1 S P D

    164U/X ... 16,0 ✘ ✘ -294U/Y(IE3)/Y 19,0 ✘ ✘ -234U/X ... 21,0 ✘ ✘ -294W ... 23,0 ✘ ✘ -294U/X ... 27,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 45

  • Amarex KRT D 150-251, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42898s/3

    0 100 200 300 400Q [m³/h]

    0 500 1000 1500 2000Q [US.gpm]

    0 500 1000 1500Q [IM.gpm]

    5

    10

    15

    20

    H [m]

    20

    40

    60

    H [ft]

    0 20 40 60 80 100 120Q [l/s]

    2

    4

    NPSHR

    [m] 10

    4

    16

    NPSHR [ft]

    4

    6

    8

    10

    P [kW]

    5

    10

    15

    P [hp]

    0 100 200 300 400Q [m³/h]

    ø254

    ø254

    ø254

    ø240

    ø240

    ø240

    ø225

    ø225

    ø225

    Qmin

    79.378.5

    78.5

    75

    75

    70

    70

    66

    66

    6050

    40

    75.675

    75

    70

    70

    666060

    5040

    72.170

    70

    66

    66

    6050

    40

    η [%]

    Free passage = 100 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    54U/X ... 5,5 ✘ ✘ - - -54UK/XK(IE3) 5,5 ✘ ✘ ✘ ✘ ✘74U/Y(IE2)/Y 5,5 ✘ ✘ - - -74W ... 5,5 ✘ ✘ - - -74U/X ... 7,5 ✘ ✘ - - -

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    74UK/XK (IE3) 7,5 ✘ ✘ ✘ ✘ ✘114U/Y(IE3)/Y 7,5 ✘ ✘ - - -114W ... 7,5 ✘ ✘ - - -164U/Y(IE3)/Y 10,5 ✘ ✘ - - -114U/X ... 11,8 ✘ ✘ - - -164W ... 11,8 ✘ ✘ - - -

    Waste WaterSubmersible Motor Pump

    46 Amarex KRT

  • Amarex KRT D 150-315, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42899s/3

    0 100 200 300 400 500Q [m³/h]

    0 500 1000 1500 2000Q [US.gpm]

    0 500 1000 1500Q [IM.gpm]

    5

    10

    15

    20

    25

    30

    35

    H [m]

    20

    40

    60

    80

    100

    H [ft]

    0 50 100 150Q [l/s]

    10

    15

    20

    23

    P [kW]

    15

    20

    25

    30

    P [hp]

    0 100 200 300 400 500Q [m³/h]

    ø317

    ø317

    ø300

    ø300

    ø280

    ø280

    Qmin

    78.6

    50

    6065

    70

    70

    75

    75

    78

    78

    77.2

    50

    6065

    70

    70

    75

    75

    73.0

    50

    6065

    65

    70

    70

    η [%]

    Free passage = 100 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P D

    214U/Y(IE3)/Y 15,0 ✘ ✘ -164U/X ... 16,0 ✘ ✘ -214W ... 16,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1 S P D

    294U/Y(IE3)/Y 19,0 ✘ ✘ -234U/X ... 21,0 ✘ ✘ -294W ... 23,0 ✘ ✘ -294U/X ... 27,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 47

  • Amarex KRT D 150-400, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K43112s/1

    0 100 200 300 400 500Q [m³/h]

    0 500 1000 1500 2000Q [US.gpm]

    0 500 1000 1500 2000Q [IM.gpm]

    10

    20

    30

    40

    50

    54

    H [m] 50

    100

    150

    H [ft]

    0 50 100 150Q [l/s]

    20

    30

    40

    14

    44

    P [kW]

    20

    40

    P [hp]

    0 100 200 300 400 500Q [m³/h]

    ø363

    ø363

    ø351

    ø351

    ø338

    ø338

    ø326

    ø326

    Qmin

    71.3

    50

    60

    64

    64

    68

    68

    70

    7068.4

    50

    60

    64

    64

    68

    68

    65.1

    50

    60

    60

    64

    6462.7

    50

    60

    60

    η [%]

    Free passage = 100 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P D

    354U/Y(IE3)/Y 30,0 ✘ ✘ -354W ... 34,0 ✘ ✘ -504U/Y(IE3)/Y 36,0 ✘ ✘ -354U/X ... 38,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1 S P D

    504W ... 38,0 ✘ ✘ -504U/X ... 48,0 ✘ ✘ -654W ... 48,0 ✘ ✘ -654U/Y(IE3)/Y 48,0 ✘ ✘ -654U/X ... 62,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    48 Amarex KRT

  • Amarex KRT D 150-401, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K43107s/1

    0 100 200 300 400 500 600 700 800Q [m³/h]

    0 1000 2000 3000Q [US.gpm]

    0 1000 2000 3000Q [IM.gpm]

    10

    20

    30

    40

    50

    6

    56

    H [m] 50

    100

    150

    H [ft]

    0 50 100 150 200Q [l/s]

    30

    40

    50

    26

    56

    P [kW]

    40

    60

    P [hp]

    0 200 400 600 800Q [m³/h]

    ø384

    ø384

    ø370

    ø370

    Qmin

    69.7

    60

    60

    65

    65

    68

    6867.7

    60

    60

    65

    65

    η [%]

    Free passage = 110 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P D

    504U/X ... 48,0 ✘ ✘ -654W ... 48,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1 S P D

    654U/Y(IE3)/Y 48,0 ✘ ✘ -654U/X ... 62,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 49

  • Amarex KRT D 200-315, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42901s/3

    0 100 200 300 400 500 600 700 800Q [m³/h]

    0 1000 2000 3000Q [US.gpm]

    0 1000 2000Q [IM.gpm]

    0

    5

    10

    15

    20

    25

    29

    H [m]

    0

    20

    40

    60

    80

    H [ft]

    0 50 100 150 200Q [l/s]

    5

    10

    15

    20

    25

    28

    P [kW] 10

    20

    30

    P [hp]

    0 100 200 300 400 500 600 700 800Q [m³/h]

    ø315

    ø315

    ø300

    ø300

    ø280

    ø280

    Qmin

    81.5

    50

    6060

    70

    70

    75

    75

    80

    80

    80.5

    5050

    60

    70

    70

    75

    75

    80

    80

    75.8

    50

    60

    70

    70

    75

    75

    η [%]

    Free passage = 100 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P D

    214U/Y(IE3)/Y 15,0 ✘ ✘ -164U/X ... 16,0 ✘ ✘ -214W ... 16,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1 S P D

    294U/Y(IE3)/Y 19,0 ✘ ✘ -234U/X ... 21,0 ✘ ✘ -294W ... 23,0 ✘ ✘ -294U/X ... 27,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    50 Amarex KRT

  • Amarex KRT D 200-400, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K43088s/1

    0 200 400 600 800 1000 1200Q [m³/h]

    0 1000 2000 3000 4000 5000Q [US.gpm]

    0 1000 2000 3000 4000Q [IM.gpm]

    10

    20

    30

    40

    2

    44

    H [m] 50

    100

    H [ft]

    0 100 200 300Q [l/s]

    30

    40

    50

    26

    56

    P [kW]

    40

    60

    P [hp]

    0 200 400 600 800 1000 1200Q [m³/h]

    ø375

    ø375

    ø355

    ø355

    Qmin

    75.2

    60

    60

    65

    65

    70

    70

    74

    7471.2

    60

    60

    65

    65

    70

    70

    η [%]

    Free passage = 100 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P D

    504U/X ... 48,0 ✘ ✘ -654W ... 48,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1 S P D

    654U/Y(IE3)/Y 48,0 ✘ ✘ -654U/X ... 62,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 51

  • Amarex KRT D 250-400, n = 1450 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42903s/4

    0 200 400 600 800 1000 1200 1400Q [m³/h]

    0 2000 4000 6000Q [US.gpm]

    0 1000 2000 3000 4000 5000Q [IM.gpm]

    0

    5

    10

    15

    20

    25

    30

    35

    37

    H [m]

    0

    20

    40

    60

    80

    100

    120

    H [ft]

    0 100 200 300 400Q [l/s]

    20

    40

    60

    10

    70

    P [kW]

    20

    40

    60

    80

    P [hp]

    0 200 400 600 800 1000 1200 1400Q [m³/h]

    ø370

    ø370

    ø360

    ø360

    ø340

    ø340

    ø320

    ø320

    Qmin

    78.0

    60

    60

    65

    65

    70

    70

    75

    7575.8

    60

    60

    65

    65

    70

    70

    75

    75

    71.1

    60

    60

    65

    65

    70

    7066.3

    60

    60

    65

    65

    η [%]

    Free passage = 120 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P D

    354U/Y(IE3)/Y 30,0 ✘ ✘ -354W ... 34,0 ✘ ✘ -504U/Y(IE3)/Y 36,0 ✘ ✘ -354U/X ... 38,0 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1 S P D

    504W ... 38,0 ✘ ✘ -504U/X ... 48,0 ✘ ✘ -654W ... 48,0 ✘ ✘ -654U/Y(IE3)/Y 48,0 ✘ ✘ -654U/X ... 62,0 ✘ ✘ -

    Waste WaterSubmersible Motor Pump

    52 Amarex KRT

  • Amarex KRT D 150-315, n = 960 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42900s/3

    0 50 100 150 200 250 300 350Q [m³/h]

    0 500 1000 1500Q [US.gpm]

    0 200 400 600 800 1000 1200Q [IM.gpm]

    5

    10

    15

    H [m]

    20

    40

    H [ft]

    0 20 40 60 80 100Q [l/s]

    1

    2

    NPSHR

    [m] 5

    2

    7

    NPSHR [ft]

    3

    4

    5

    6

    P [kW] 6

    8

    P [hp]

    0 50 100 150 200 250 300 350Q [m³/h]

    ø317

    ø317

    ø317

    ø300

    ø300

    ø300

    ø280

    ø280

    ø280

    Qmin

    77.5

    76

    76

    72.5

    72.5

    70

    70

    6660

    5040

    76.176 76

    72.5

    72.5

    70

    70

    66

    66

    60

    5040

    71.9

    70

    70

    66

    66

    60

    5040

    η [%]

    Free passage = 100 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    46U/X ... 4,8 ✘ ✘ - - -46UK/XK(IE3) 4,8 ✘ ✘ ✘ ✘ ✘66U/Y(IE3)/Y 4,8 ✘ ✘ - - -66W ... 4,8 ✘ ✘ - - -66U/X ... 6,0 ✘ ✘ - - -

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    66UK/XK(IE3) 6,0 ✘ ✘ ✘ ✘ ✘96U/Y(IE3)/Y 6,5 ✘ ✘ - - -96W ... 6,5 ✘ ✘ - - -96U/X ... 9,0 ✘ ✘ - - -126U/Y(IE3)/Y 9,0 ✘ ✘ - - -126W ... 9,0 ✘ ✘ - - -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 53

  • Amarex KRT D 200-315, n = 960 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42902s/3

    0 100 200 300 400 500Q [m³/h]

    0 500 1000 1500 2000Q [US.gpm]

    0 500 1000 1500Q [IM.gpm]

    0

    5

    10

    H [m]

    0

    20

    40

    H [ft]

    0 50 100Q [l/s]

    1

    2

    NPSHR

    [m] 5

    1

    7

    NPSHR [ft]

    2

    4

    6

    8

    P [kW]

    5

    10

    P [hp]

    0 100 200 300 400 500Q [m³/h]

    ø315

    ø315

    ø315

    ø300

    ø300

    ø300

    ø280

    ø280

    ø280

    Qmin

    80.1

    78

    78

    75

    75

    70

    70

    60

    50

    79.178

    78

    75

    75

    70

    70

    6050

    74.3

    70

    70

    606050

    η [%]

    Free passage = 100 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    46U/X ... 4,8 ✘ ✘ - - -46UK/XK(IE3) 4,8 ✘ ✘ ✘ ✘ ✘66U/Y(IE3)/Y 4,8 ✘ ✘ - - -66W ... 4,8 ✘ ✘ - - -66U/X ... 6,0 ✘ ✘ - - -

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    66UK/XK (IE3) 6,0 ✘ ✘ ✘ ✘ ✘96U/Y(IE3) / Y 6,5 ✘ ✘ - - -96W ... 6,5 ✘ ✘ - - -96U/X ... 9,0 ✘ ✘ - - -126U/Y(IE3)/Y 9,0 ✘ ✘ - - -126W ... 9,0 ✘ ✘ - - -

    Waste WaterSubmersible Motor Pump

    54 Amarex KRT

  • Amarex KRT D 250-400, n = 960 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42904s/3

    0 200 400 600 800 1000Q [m³/h]

    0 1000 2000 3000 4000Q [US.gpm]

    0 1000 2000 3000Q [IM.gpm]

    0

    2

    4

    6

    8

    10

    12

    14

    16

    H [m]

    0

    20

    40

    H [ft]

    0 50 100 150 200 250Q [l/s]

    5

    10

    15

    20

    3

    P [kW] 10

    20

    P [hp]

    0 200 400 600 800 1000Q [m³/h]

    ø370

    ø370

    ø360

    ø360

    ø340

    ø340

    ø320

    ø320

    Qmin

    76.4

    50

    60

    60

    65

    65

    70

    70

    75

    7574.2

    50

    50

    60

    60

    65

    65

    70

    7069.5

    50

    60

    60

    65

    6564.6

    50

    50

    60

    60

    η [%]

    Free passage = 120 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    206U/Y(IE2)/Y 12,0 ✘ ✘ - - -206W ... 13,0 ✘ ✘ - - -206U/X ... 18,0 ✘ ✘ - - -266U/Y(IE2)/Y 18,0 ✘ ✘ - - -

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    266W ... 18,0 ✘ ✘ - - -266U/X ... 24,0 ✘ ✘ - - -266U/Y(IE3)/Y 24,0 ✘ ✘ - - -326W ... 24,0 ✘ ✘ - - -

    Waste WaterSubmersible Motor Pump

    Amarex KRT 55

  • Amarex KRT D 300-400, n = 960 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K42906s/3

    0 200 400 600 800 1000 1200Q [m³/h]

    0 1000 2000 3000 4000 5000Q [US.gpm]

    0 1000 2000 3000 4000Q [IM.gpm]

    2

    4

    6

    8

    10

    12

    14

    16

    18

    0.5

    H [m]

    20

    40

    H [ft]

    0 100 200 300Q [l/s]

    10

    20

    30

    6

    34

    P [kW] 20

    40

    P [hp]

    0 200 400 600 800 1000 1200Q [m³/h]

    ø408

    ø408

    ø390

    ø390

    ø375

    ø375

    Qmin

    80.7

    65

    65

    70

    70

    75

    75

    78

    78

    80

    80

    79.0

    65

    65

    70

    70

    75

    75

    78

    78

    75.0

    65

    65

    70

    70

    7575

    η [%]

    Free passage = 150 mm

    Material variant G/G1 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    206U/X ... 18,0 ✘ ✘ - - -266U/Y(IE2)/Y 18,0 ✘ ✘ - - -266W ... 18,0 ✘ ✘ - - -266U/X ... 24,0 ✘ ✘ - - -

    Motor size P2 [kW] Installation type

    G/G1 S P K D H

    266U/Y(IE3)/Y 24,0 ✘ ✘ - - -326W ... 24,0 ✘ ✘ - - -326U/X ... 30,0 ✘ ✘ - - -406W ... 30,0 ✘ ✘ - - -406U/Y(IE3)/Y 30,0 ✘ ✘ - - -

    Waste WaterSubmersible Motor Pump

    56 Amarex KRT

  • K impeller

    Amarex KRT K 40-250, n = 2900 rpm

    Characteristic curves in acc. with ISO 9906-2A. n = speed

    K41875s/8

    0 10 20 30 40 50 60Q [m³/h]

    0 50 100 150 200 250Q [US.gpm]

    0 50 100 150 200Q [IM.gpm]

    20

    40

    60

    80

    100

    5

    H [m] 100

    200

    300

    H [ft]

    0 5 10 15Q [l/s]

    0

    5

    10

    15

    20

    23

    P [kW]

    0

    10

    20

    30

    P [hp]

    0 10 20 30 40 50 60Q [m³/h]

    ø256

    ø256

    ø235

    ø235

    ø210

    ø210

    ø180

    ø180

    ø150

    ø150

    55.9

    20 3040

    4550

    54

    56.8

    20 30 40 4550

    545656

    56.0

    20 3040 4545

    5054

    5656

    55.6

    20 30 40 4550

    54

    54

    55.0

    20 30 40 4550

    50

    5454

    η [%]

    Free passage = 15 mm

    Material variant G/G1/GH/H/C1/C2 for motor version U/X/Y/W

    Motor size P2 [kW] Installation type

    G/G1/GH/H C1/C2 S P D

    52U/X ... 5,0 5,0 ✘ ✘ -62W ... 5,0 5,0 ✘ ✘ -62U/Y(IE3)/Y 5,0 5,0 ✘ ✘ -62U/X ... 6,5 6,5 ✘ ✘ -82W ... 6,5 6,5 ✘ ✘ -82U/Y(IE2)/Y ... 6,5 6,5 ✘ ✘ -82U/X ... 8,5 8,3 ✘ ✘ -

    Motor size P2 [kW] Installation type

    G/G1/GH/H C1/C2 S P D

    122W ... 8,5 8,5 ✘ ✘ -122U/Y(IE3)/Y 8,5 8,5 ✘ ✘ -122U/X ... 12,2 11,0 ✘ ✘ -172U/Y(IE3)/Y 1


Recommended