KEY MACHINESIlco® & Silca® Key Machines Duplicator for Cylinder/Auto Keys ......52 Duplicators & Code Cutters for Cylinder/Auto Keys ................... 52-53 Duplicator & Code Cutter for High Security Commercial Keys ............53 Duplicator for Flat, Bit, Post and/or Pump Keys .........................53 Duplicators & Code Cutters for Cylinder/Auto Keys .............. 53-54 Duplicators & Code Cutters for High Security Keys ..........................54 Code Software and Computer Adapters ...........................................54Silca Key Machine Optional Jaws and Accessories ............................ 54-55Ilco & Ilco/Orion Key Machine Cutters ..56Ilco & Ilco/Orion Key Machine Cutter Conversion Kits ...................................56Ilco/Orion High Security Cutter and Guide Replacements ..................56Silca Key Machine Cutters .....................57Silca High Security Cutter & Guide Replacements .....................................57Ilco and Ilco/Orion Replacement Parts & Accessories....................... 58-59Silca Replacement Parts & Accessories ................................... 59-60Transponder Equipment .........................61Auto Packages ........................................61Software Updates ....................................61Electronic Key Marker .............................63Engrave-It™ PRO ............................. 63-65Engrave-It™ XP ......................................65Engrave-It™ ....................................... 65-66Sales Policy..............................................68
www.kaba-ilco.comA member of the Kaba Group
Key BlanksKey Assortments
Key Machines
U.S. Dollars
2 Key Blanks January 13, 2014
Understanding the Price Group (PG) ColumnThe number in the ‘PG’ column next to the key blank number indicates that key’s price group. Refer to the Price Group Chart on page 3 for the associ-ated pricing.
Understanding the symbols used: Appears in Key No. Column
* - Key blank is listed by more than one key blank number such as X137 and TR33.
† - Key blank has changed price groups since last price list # - New item ^ - Original Key (see page 40)
Suffix to Key Blank Number -P - Key blank has a Black plastic head. -PC - Key blank has colored plastic head. -PT - Key blank has transponder in the head of the key. A suffix
number (1, 6, etc.) indicates that the transponder is pro-grammed as specified. PT5 is described below.
PT2/5 - Key blank transponder can be programmed using the latest Ilco cloning equipment.
EK3 - Electronic Clonable keys - use the latest Ilco cloning equipment.
Understanding the Finish (Fin.) ColumnFinishCode Description CommentsAB Antique Bronze This finish is applied to some bit and barrel
keysBM Bi-Metallic A bit key made using a stamped steel shank,
Nickel Plated, with either a zinc or plastic tip.BR Brass Natural brass finish with anti-tarnish protec-
tion.GO Gold A brass type finish for bit and barrel keys.MI Malleable Iron A bit or barrel key made of malleable iron with a
ble, usually applied over brass key blanks.NS Nickel Silver Natural nickel silver finish with clear anti-
tarnish protection.PT Painted A patterned finishST Steel Steel key with Nickel Plate finish.ZI Zinc Zinc key with Nickel Plate finish.
Locating the Ilco Key Blank numberKeys are in numerical/alpha sequence beginning with the base number. Example: 1145 1145A 1145CE 1145J A1145CEThe base number consists of one or more digits e.g., 2B, AB62C, 998GA, A1012-24N, S1098WD.
If the base number has a letter prefix, first find the base number, then the prefix. e.g.: S1098WD, H1122F, A1145CE.
If the key’s base number does not have a prefix then the suffix (if any) would determine that key’s placement within the group.e.g.: 1145A 1145CE
PG No.
3668
S1098WDS1098WHSC1098XP1099P1101
PG No.
3668
S1098WDS1098WHSC1098XP1099P1101
Key Blank Information
All stock metal keys, other than Bit & Barrel keys, will be considered as packaged 10 keys per bag and 50 keys per box. Orders for less than 50 keys/sku, in multiples of 10, will receive less than box pricing. All plastic head keys and Bit & Barrel keys will be considered as packaged 5 keys per bag and 25 keys per box. Orders for less than 25 keys/sku, in multiples of 5, will receive less than box pricing.
VATS, Transponder and Electronic keys may be ordered in multiples of one without less than box pricing. Keys in price groups 22 through 63 will not receive less than box pricing regardless of quantity ordered, but must be ordered in proper multiples as explained above.
LESS THAN BOX QUANTITY PRICING
PACKAGING OF KEY BLANKSStandard Metal Head - Most standard metal head key blanks are packaged 10 per polybag, 5 polybags (50 keys) per box. Exceptions are the INF90 and FCT45 which are packed 5 per polybag, 5 polybags (25 keys) per box.250 pack keys- 250/box.Look Alike keys – 50/boxBit & Barrel keys – 5/polybag, 5 polybags (25 keys) per box.Plastic Head keys- 5/polybag, 5 polybags (25 keys) per box.Standard pattern painted keys- 10/polybag, 5 polybags (50 keys) / box.Packaged TeamKeys™- 5/polybag, 10 polybags (50 keys) / box.Carded TeamKeys™ or Carded KeyTools™- 1/card, 5cards/polybag, 5 poly-bags (25 carded keys)/box.Packaged Collegiate Painted keys- 5/polybag, 10 polybags (50 keys) / box.Carded Collegiate Painted keys- 1/card, 5cards/polybag, 5 polybags (25 carded keys)/box.Non-stock keys- Bulk packed.Transponder, Electronic & VATS keys – 1/polybag, 5 polybags (5 keys) / box
PRODUCT AVAILABILITY LEAD-TIMEKaba Ilco Corp is dedicated to providing fast, reliable and consistent deliveries to our customers. As with any extensive line of products, the manufacturing times will vary. For this reason, we organize Ilco products by “lead time”.
In order to better serve our customers, “lead times” (LT) are indicated in the Comprehensive Key Blank Listing. These lead-times are also shown at the beginning of each key grouping (i.e. Ilco-EZ (dual Numbered) Listing, Transponder Key Listing, etc.)
The majority of Ilco stock key blanks have a standard lead-time of 3 days from order acceptance. For these items, we have not listed individual lead-times.
“B” lead-times indicate items that are stock items, however unexpected large orders may make these items temporarily “out of stock”. In these situations the projected lead-time is 4 weeks.
Items with a “C” lead-time may be in stock. Should these items be out of stock, extended lead times may occur.
Custom keys (non-stock) lead times are identified at the beginning of their key groups.
January 13, 2014 Key Blanks 3
Key Blank Price Groups
PRICE LESS GROUP WAREHOUSE DIST. THAN BOX SUGGESTED (PG) DIST. NET NET QUANTITY DLR.
Key No. Dual Numbers Fin PG Key No. Dual Numbers Fin PG Key No. Dual Numbers Fin PG
Ilco — EZ (Dual Numbered) Listing Our most commonly ordered keys. These keys are embossed with both the Ilco identification number and the EZ identification number. Lead time is 3 days.
** Refer to Pages 37-39 for Transponder Key Pricing
Whse. Dist. Sugg.Key No. Description Dist. Net Net Dlr.
EK3RT - (EH3) Head Removal Tool 27.05 29.95 54.10
Key No. Fin PG Key No. Fin PG Key No. Fin PG Key No. Fin PGB82-P-2-GM Original NP 50B82-P-3-GM Original NP 50B82-P-4-GM Original NP 50B82-P-5-GM Original NP 50B82-P-6-GM Original NP 50B82-P-7-GM Original NP 50B82-P-8-GM Original NP 50B82-P-9-GM Original NP 50B82-P-10-GM Original NP 50B82-P-11-GM Original NP 50B82-P-12-GM Original NP 50B82-P-13-GM Original NP 50B82-P-14-GM Original NP 50B82-P-15-GM Original NP 50B62-P-1-GM Original NP 50B62-P-2-GM Original NP 50B62-P-3-GM Original NP 50B62-P-4-GM Original NP 50
B62-P-5-GM Original NP 50B62-P-6-GM Original NP 50B62-P-7-GM Original NP 50B62-P-8-GM Original NP 50B62-P-9-GM Original NP 50B62-P-10-GM Original NP 50B62-P-11-GM Original NP 50B62-P-12-GM Original NP 50B62-P-13-GM Original NP 50B62-P-14-GM Original NP 50B62-P-15-GM Original NP 50B104-P-2-GM Original NP 50B104-P-3-GM Original NP 50B104-P-4-GM Original NP 50B104-P-5-GM Original NP 50B104-P-6-GM Original NP 50B104-P-7-GM Original NP 50B104-P-8-GM Original NP 50
B104-P-9-GM Original NP 50B104-P-10-GM Original NP 50B104-P-11-GM Original NP 50B104-P-12-GM Original NP 50B104-P-13-GM Original NP 50B104-P-14-GM Original NP 50B104-P-15-GM Original NP 50B62-P-1 VATS NP 37B62-P-2 VATS NP 37B62-P-3 VATS NP 37B62-P-4 VATS NP 37B62-P-5 VATS NP 37B62-P-6-VATS NP 37B62-P-7 VATS NP 37B62-P-8 VATS NP 37B62-P-9 VATS NP 37B62-P-10 VATS NP 37B62-P-11 VATS NP 37
Bit and Barrel Key Listing Lead time is 4 weeks. Packaged 5/polybag, 5 polybags/box
Key No. Fin PG Key No. Fin PG Key No. Fin PG Key No. Fin PG1B MI 222B ST 11B2M ST 243B MI 213F-1033 GO 373F-1140 GO 373F-1232 AB 373F-1540 GO 373F-1630 GO 373F-1730 AB 373F-1738 AB 373F-2532 GO 373F-2635 GO 373F-2830 AB 373F-2933 AB 373F-4135 AB 373F-4333 GO 373F-4535 GO 37
3F-4735 GO 373F-4935 GO 373F-5233 AB 373F-6932 AB 373M-2127 GO 373M-2136 GO 373M-2734 GO 373M-3427 GO 373M-3437 GO 373M-5935 GO 373S-1832 GO 373S-2332 GO 373S-5332 GO 373S-7032 GO 375B MI 22B5A ST 246B MI 22B6 BM 22
7B ST 11B7M ST 248B MI 229B MI 22B9 ST 2212B MI 2217B MI 22B17 ST 2319B MI 22B20 ST 2321B MI 2122BB MI 2222M MI 2223B MI 2123M MI 2224B MI 2125B MI 2227B MI 22
C30M BR 2234B MI 2237 BM 16B41A ST 2345B MI 2349B MI 2153 ST 22C53 MI 2266B MI 22B70 ST 2179B MI 2184B MI 2190B MI 2391B MI 22178SB MI 24504 BM 24669 MI 236750 BR 22
Stock Painted Keys Lead time is 3 days on bagged keys and 4 weeks for all carded keys Bagged Carded Description PG PG
To view our most current stock painted key pattern
offerings please refer to our literature or visit our web site
at www.kaba-ilco.com
January 13, 2014 Key Blanks 45
General Information• A deposit equal to 50% of the total order value is due when the order is sub-
mitted. Orders will not be processed until we receive this deposit.• Minimum order is 1,000 pieces per product style.• Standard packaging is bulk.• Color / shade variations are normal in the color transfer processes used to
decorate these products. We do not guarantee color match.• One set of three (3) painted pre-production samples will be provided at no
charge for customer approval. Pre-production samples are not of the same high quality as the production keys, they are a fair representation of the col-ors and design.
• Design tooling and art design fees are not cancelable or refundable. These charges are payable with your order submission. After original
artwork submission and sample approval, changes to designs or colors will result in additional charges.
• For Kaba Ilco art development allow 2 – 3 weeks after placing your order.• Delivery of product ordered is 8 – 10 weeks after final approval of art/sample.• Re-orders are typically shipped 3 – 4 weeks after receipt of order.
Art and Sample Charges• A one time art tooling charge of $250 per design will apply to all custom
orders. (Same design on both sides is one tooling charge. Different designs on each side equals two tooling charges.)
• Kaba Ilco art/design development or manipulation of customer-supplied art will be charged at $75.00/hour (minimum of one hour).
Non-Stock Custom Painted Keys Lead time: See below. Bulk packaged
1000- 5000- Description 4,999 9,999 10,000+
A pre-printed Custom Painted Order Form is available for your convenience. This form includes actual size outlines of each key and order-ing specifications. To obtain a copy of this form contact our Customer Service department.
HANS-KW1-100PK NS 10HANS-SC1-100PK NS 10
HANS-Y1-100PK NS 10HANS-WK2-100PK NS 10
HANS-WR3-100PK NS 10HANS-AR4-100PK NS 10
HANS-SC4-100PK NS 10
Large Square Bow Keys, Ilco standard coining (see page 46, General Notes) Packaged 100/box Key No. Fin PG Key No. Fin PG Key No. Fin PG Key No. Fin PG
Neuter Bow Keys, Incised Do Not Duplicate Packaged 50/box or 250/box (250PK suffix) Key No. Fin PG Key No. Fin PG Key No. Fin PG Key No. Fin PG
KW1-BIG BR 11 SC1-BIG BR 11 1510-BW2 NS 14
BIG - Oversized Versions of the Original Manufacturer’s Bow Shapes Key No. Fin PG Key No. Fin PG Key No. Fin PG
Terms used for Coined or Engraved keysThere are several terms used when defining the processes used in putting an image or text on to the bow of a key. Here is a brief definition of those terms. Note: Embossing both sides of a key may result in less than desirable results as there is limited material to spread. When seeking to place an image or text on both sides of a key, if you elect to emboss the text or image on the surface of one side of the key it is generally advisable to incise the other side. Text may be incised on both sides of a key with no difficulty.
Coined: The manufacturing process of placing the text or image on to the bow of the key. In this process, the image or text put on the key bow/head may be embossed or incised.
Embossed: A result of the coining process where the text or image appears raised on the surface of the key. (As on any U.S. coin)
Incised: Normally restricted to text. A result of the coining process where the text is depressed into the surface of the key.
Engraved: Engraving is not a coining process. The text is engraved into the surface of the key using a mechanical or laser engraving machine.
Thumb side: When holding a key between the thumb and finger of the right hand, with the bitted or cutting edge facing upward, the thumb rests on the thumb side of the key. The finger rests on the finger side.
Finger side: When holding a key between the thumb and finger of the right hand, with the bitted or cutting edge facing upward, the finger rests on the finger side of the key. The thumb rests on the thumb side.
Neuter Bow Keys, Plain both sides Packaged 50/box Key No. Fin PG Key No. Fin PG Key No. Fin PG Key No. Fin PG
46 Key Blanks January 13, 2014
Non-Stock Neuter Bow Lead times: 4 weeks after art approval if dies are required. 2 weeks if dies are on file. Bulk packaged
Nickel Nickel Description Brass Plate Silver PG
General notes: Neuter bow keys are available in many commercial and residential keyways, plus the 1092-M1 padlock key. Automotive keyways are not available. These keys are made to order, therefore quantities are subject to 10% over or under order quantity. Invoice will be for exact quantity shipped.DO NOT DUPLICATE or PLAIN neuter bow keys:To obtain keys that are incised DO NOT DUPLICATE order as follows:
KEYWAY # - HN - FINISH (example:1145-HN- BRASS)To obtain keys that are totally plain, order as follows:
KEYWAY - HN - FINISH - PLAIN (example: 1145 - HN - BRASS - PLAIN)The minimum order for non-stock neuter bow keys is 250/keyway.
Custom Coined neuter bow keys:Coining die charges: A one-time die design charge of 150.00 (text only), per die needed, applies to all ‘new’ coining. For logos or more complex line art the charge is 200.00 per die needed. A clear Black & white copy of the artwork must be included with the initial order. Coining die charges are waived if initial order is for 5,000 or more keys.Order minimums:The initial order minimum is 1,000 keys but may be divided among different keyways as long as you have a minimum of 250/keyway.Re-order minimum is 250/keyway.
Non-Stock Ad-Line Lead times: 4 weeks after art approval if dies are required. 2 weeks if dies are on file. Bulk packaged
General notes:Embossed keys:Coining die charges: A one-time die design charge of 150.00 (text only) per die needed applies to all ‘new’ coining. For logos or more complex line art the charge is 200.00 per die needed. A clear Black & white copy of the artwork must be included with the initial order. Coining die charges are waived if initial order is for 5,000 or more keys.
Order minimums:The initial order minimum is 1,000 keys but may be divided among different key-ways as long as you have a minimum of 250/keyway.Re-order minimum is 250/keyway.
HA, HG, HO, HW, MA (Ilco Standard Embossing) 10HB, HH, HP, HX, MB (Ilco Standard Embossing, No chain hole) 11HC, HJ, HQ, HY, MC (Custom Embossing) 12HD, HK, HR, HZ, MD (Custom Embossing, No chain hole) 15
Non-Stock Specialty Bows Lead times: 4 weeks after art approval if dies are required. 2 weeks if dies are on file. Bulk Packaged
Description PG
General notes:• All large bow specialty keys are manufactured only in nickel-silver material.• Large bow keys are available in many commercial and residential keyways.
Automotive keyways are not available.• Ilco standard embossing consists of a linen weave type finish on the
thumb side and the same finish with a smooth (approx. 1/2 x 1) block and the Ilco name on the finger side.
• These keys are made to order, therefore quantities are subject to 10% over or under order quantity. Invoice will be for exact quantity shipped.
• Prices are for standard bulk packaging only. Add 1.50/hundred for 250/box, 100/box, or 50/box. If desired, be sure to specify special packaging when ordering.
Coining die charges:• A one-time die design charge of 150.00 (text only), per die needed, applies to
all ‘new’ coining. For logos or more complex line art the charge is 200.00 per die needed. A clear Black & white copy of the artwork must be included with the initial order.
• Coining die charges are waived if initial order is for 5,000 or more keys.Order minimums:• The initial order minimum is 2,000 keys but may be divided among different
keyways as long as you have a minimum of 500/keyway.• Re-order minimum is 500/keyway.
HA HB HC HD HG HH HJ HK HO HP
HQ HR HW HX HY HZ MA MB MC MD
HNHN (Either Incised Do Not Duplicate or Plain) 6 6 9HN (Custom Coined) 8 8 10HN (Engraved) Key Price + 10.00/hundred
January 13, 2014 Key Blanks 47
Non-Stock Ad-Line (continued)
Key Blank Number Material - Finish To Fit
Key Blank Number Lines Avail. Ilco Equiv. To FitAM3-ILCO-P 3 1045 American PadlockAP1-ILCO-P 3 101AM ChicagoAP2-ILCO-P 3 102AM ChicagoAP3-ILCO-P 3 103AM ChicagoAP4-ILCO-P 3 104AM ChicagoAR1-ILCO-P 3 1179 Arrow 5 PinB1-ILCO-P 3 1098M Strattec / B & SB44-ILCO-P 3 P1098E GM Ignition E KeywayB45-ILCO-P 3 S1098H GM Door/Trunk H KeywayB46-ILCO-P 3 P1098J GM Ignition J KeywayB47-ILCO-P 3 S0198K GM Door/Trunk K KeywayB48-ILCO-P 3 P1098A GM Ignition A KeywayB49-ILCO-P 3 S1098B GM Door/Trunk B KeywayB50-ILCO-P 3 P1098C GM Ignition C Keyway
NOTE: All of the keys below use the Russwin Embossing DieAD-1011D1 Brass-NP Russwin 5 Pin D1AD-A1011D1 Brass-NP Russwin 6 Pin D1AD-N1011P Brass-NP Russwin 5 Pin
NOTE: All of the keys below use the Viro Embossing DieAD-VR91 Brass-NP ViroAD-VR91R Brass-NP Viro
NOTE: All of the keys below use the Yale Embossing DieAD-999 Brass-NP Yale 5 Pin ParacentricAD-999A Brass-NP Yale 6 Pin Paracentric
NOTE: All of the keys below use the Small 6 Pin Tumbler Embossing DieAD-O1122 Brass-NP Small 5 Pin Tumbler Y11AD-O1122A Brass-NP Small 5 Pin Tumbler Y12AD-O1122R Brass-NP Small 5 Pin Tumbler Y13AD-O1122AR Brass-NP Small 5 Pin Tumbler Y14
Ad-Line Embossed
Different embossing dies are required for each different head design (refer to the Key Availability List). There is one tooling design charge for each different embossing die. For example, if you ordered AD-1145 and AD-A1145E (these would use the same embossing die) and AD-999 (this uses a different embossing die), there would be two tooling design charges. Likewise, if you elect to emboss both the thumb and finger sides of a key there would be two tooling design charges. The tooling design charges may be waived if the initial order exceeds 5,000 key blanks using the same die.
When ordering: Indicate the key blank number as listed in the Key Availability List. Please submit a clear, Black and white, camera ready copy of the logo and/or text desired for both the thumb and/or finger sides of the key. Keep in mind that emboss-ing space is limited and the more detail/text you request, the smaller the detail/text will be. To preserve text clarity, do not exceed 3 lines of copy, 13 characters per line. Please list any special instructions on your order if necessary. Artwork will be prepared and submitted for customer approval before any tooling is made.
Our Ad-Line Engraved Series allows you to specify engraved text for the finger side of the head of an Ilco brand nickel-plated brass key blank. Retaining the original manufac-turer’s head shape, the Ilco name and key number allows quick key identification when your customers return for additional dupli-cate keys. Engraving your store name and phone number on these keys is inexpensive advertising and assures repeat business. There are no tooling design charges, so the engraved text may be changed from order to order. The low order minimums enhance inventory turns.
Thumb Side Description Finger Side Key Number (Logo/Text) (Text)
AD-1179 LINE 1 LOGO - (123) 456-7890 LINE 2 see attached artwork LINE 3
Key Blank Number Lines Avail. Ilco Equiv. To FitAd-Line Engraved (continued) Key Availability List
• The number of lines (1, 2, or 3) available for engraving the text you desire (Sorry, no logos at this time) are dictated by the size of the engraving area available on the key head (refer to Lines Avail in the Key Availability Line).
• When ordering: Indicate the key blank number as listed in the Key Availability Dlr.. Indicate the text desired on each line. To preserve text clarity, do not exceed 13 characters per line.
January 13, 2014 Key Blanks 49
Key Departments Lead time is 3 days.
Product No. Description Warehouse Dist. Sugg. Dist. Net Net Dlr.
465HD-00-8X 045 HD Key Tower Department 2,061.40 2,473.80 3,743.80465HD-00-CN 045 HD Canadian Key Tower Department 2,056.80 2,468.20 3,734.60466HD-00-8X 044 HD Key Tower Department 2,211.40 2,653.80 3,950.80466HD-00-CN 044 HD Canadian Key Tower Department 2,206.80 2,648.20 3,941.60467HD-00-8X 040 HD Key Tower Department 2,274.40 2,729.40 4,037.80467HD-00-CN 040 HD Canadian Key Tower Department 2,269.80 2,723.80 4,028.60469-00-8X KD50C Key Tower Department 3,390.40 4,068.60 5,577.80469CN-00-8X KD50C Canadian Key Tower Department 3,385.80 4,063.00 5,568.60
Key Tower and Related Components Lead time is 3 days.
Product No. Description Warehouse Dist. Sugg. Dist. Net Net Dlr.
Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.008A-110VAC Mini-Mite, portable manual 343.00 411.60 470.00008A-12VDC Mini-Mite, portable manual 375.00 450.00 517.00040 HD-110VAC Automatic/Manual dual function machine, bench model 823.00 987.60 1135.00040 HD 220VAC Automatic/Manual dual function machine, bench model C 848.00 1017.60 1170.00044 HD-110VAC Semi-Autmatic, Lever operated 760.00 912.00 1048.00044 HD-220VAC Semi-Autmatic, Lever operated B 783.00 939.60 1080.00045 HD-110VAC Manual, bench model 610.00 732.00 841.00045 HD-220VAC Manual, bench model B 633.00 759.60 873.00Bravo III w/EZ Jaw® Semi-Automatic 1641.00 1969.20 2263.00KD50C Semi-Automatic 1939.00 2326.80 2675.00Speed Dual Lever Manual, bench model B 900.00 1080.00 1250.00
Duplicators for Cylinder / Auto Keys
Duplicators & Code Cutters for Cylinder / Auto Keys Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.029A-110VAC Dual functions model cuts automotive keys by duplication or B 1106.00 1327.20 1525.00 code (using optional accessories) 029A Code Accessory Kits* 029A-CHY1 Includes components for popular domestic Chrysler applications 141.75 170.10 202.50029A-FORD1 Includes components for popular domestic Ford applications 150.00 180.00 214.29029A-GM1 Includes components for popular domestic GM applications 225.75 270.90 322.50029A-GM2 Supplemental kit for ‘04 and up Grand Prix, Cadillac SRX 68.25 81.90 97.50029A-GM3 Supplemental kit for ‘03 and up lon, Malibu 68.25 81.90 97.50029A-GM4 Supplemental kit for ‘04 and up Canyon, Colorado 78.90 94.68 112.71029A-GMDAT Supplemental kit of ‘03 and up GM branded Daewoo vehicles 80.90 97.08 115.57029A-HD1 Includes components for popular Honda applications 115.50 138.60 165.00029A-HYU1 Includes components for popular Hyundai applications 241.30 289.56 344.71029A-HYU2 Supplemental kit for Hyundai code series F1-2500 and S1-2500 69.00 82.80 98.57029A-HYU3 Supplemental kit for Hyundai code sesries V1-1200 (4-1) 63.00 75.60 90.00029A-HYU07 Supplemental kit for Hyundai code series H(M, T) 1-2500 36.75 44.10 52.50029A-KIA1 Includes components for popular Kia applications 178.50 214.20 255.00029A-KIA2 Supplemental kit for Kia code series WC & WD1001-3500 53.55 64.26 76.50029A-MAZ1 Includes components for popular Mazda applications 141.75 170.10 202.50029A-MIT1 Includes components for popular Mitsubishi applications 195.00 234.00 278.57029A-NIS1 Includes components for popular Nissan applications 131.25 157.50 187.50029A-TOY1 Includes components for popular Toyota applications 165.00 198.00 235.71029A-TOY2 Includes components for 10-cut Toyota applications 92.40 110.88 132.00 029A Component Pricing P10-## Depth Knob 21.00 25.20 30.00SK-### Spacing Key 18.90 22.68 27.00Code Books (pricing varies by content, contact ILCO for information) B
008A-
KD50C-
040 HD-
045 HD-
044 HD-
029A-
PRODUCT AVAILABILITY LEAD-TIMEKaba Ilco Corp is dedicated to providing fast, reliable and consistent deliveries to our customers. As with any extensive line of products, the manufacturing times will vary. For this reason, we organize Ilco products by “lead time”.
Most Ilco and Silca key machine models listed typically have a standard lead time of 3 days from order acceptance. For these items lead times are not listed.
“B” lead-times indicate items that are stock items, however unexpected large orders may make these items temporarily “out of stock”. In these situations the projected lead-time is 4 weeks.
Items with a “C” lead-time may be in stock. Should these items be out of stock, extended lead times may occur.
ILCO® AND SILCA® KEY MACHINES
* Components are available for additional manufacturers and vehicle applications; refer to 029A Reference Guide for component information. Also, parts are available for many automotive applications that are not sold in kit form.
Bravo III w/EZ Jaw®
Speed
MECHANICAL KEY CUTTING MACHINES
January 13, 2014 Key Machines 53
Duplicators & Code Cutters for Cylinder / Auto Keys (continued) Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr. Universal II and Accessories Universal II Card type mechanical code machine for commercial and B 1585.00 1902.00 2113.33 automotive keys; includes 2 cutters, 120 code cards T14MC Cutter 87.95 105.54 125.64TCW-1011 Cutter 76.75 92.10 109.64TCW-1012 Cutter 85.80 102.96 122.57TCW-1013 Cutter 76.75 92.10 109.64TCW-1014 Cutter 76.75 92.10 109.64TCW-90MC Cutter 76.75 92.10 109.64TCW-20FM Cutter 76.75 92.10 109.64MCM-SH1 Flat Shim 1.75 2.10 2.50MCM-TSR Red Tip Stop 2.05 2.46 2.93MCM-TSU U-Shaped Tip Stop 8.80 10.56 12.57MCM-MJ1 Medeco jaw B 60.75 72.90 86.79MCM-SPJ1 Schlage Primus jaw B 60.75 72.90 86.79MCM-PKS Kaba Peaks Jaw B 41.75 50.10 59.64MCM-CP1 Code Card set 417.80 501.36 596.86CC-# # # # Code Card (specify card # desired) 11.90 14.28 17.00MCM-CH Card Holder Panel 14.90 17.88 21.29MCM-8 Replacement Wing Nut 15.75 18.90 22.50MCM-6X Thrust Bearing set 3.70 4.44 5.29
Duplicators & Code Cutters for High Security Keys Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.009B-110VAC Duplicates tubular keys, 1137 size only, with indexing feature 456.00 547.20 626.00Crown Duplicates various type tubular keys B 1482.50 1779.00 2030.85 Delta FO Cuts Tibbe keys for Ford and Jaguar applications, 6 cut and B 1641.00 1969.20 2247.95 8 cut by code 057 HS 110V Duplicates internal & external track “laser” style high B 1149.00 1378.80 1641.43 automotive keys057 HS 220V Duplicates internal & external track “laser” style high security C 1176.00 1411.20 1680.00 automotive keysMatrix S Duplicates internal & external track “laser” style high security B 1992.00 2390.40 2728.77 automotive keys, electronic adjustment
009B-
Duplicators for Flat, Bit, Post and/or Pump Keys
046 HD-
Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.
046 HD-110VAC Manual, bench model, cuts safe deposit and other flat steel keys 645.00 774.00 889.00046 HD-220VAC Manual, bench model, cuts safe deposit and other flat steel keys C 667.00 800.40 920.00
Universal II
Ilco EZ®-Code II
Duplicators & Code Cutters for Cylinder/Auto Keys Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.Ilco EZ®-Code II Electronic code and duplication 3599.00 4270.80 4910.00 Unocode 199 Electronic code and duplication for automotive, cylinder B 6200.00 7440.00 7750.00 and cruciform keys. Duplication in stand alone mode, cut by code in PC mode. Includes 12 months FREE Kreate-A-Key™ Software.D741756ZB UC199 Automatic Feeder Unit (no air required) C 4000.00 4800.00 5000.00Unocode 399 Electronic code and duplication for flat cylinder or C 11500.00 13800.00 14375.00 automotive keys. Designed to work either stand alone (on board database) or with a PC. Optical reader, carbide cutter, automatic depth and space calibration and optional automatic feeder.D717228ZB UC399 Automatic Freeder Unit (requires dry air supply) C 7938.00 9525.60 9922.50
Unocode 199
CrownDelta FO
Matrix S057 HS
ELECTRONIC KEY CUTTING MACHINES
Unocode 399
54 Key Machines January 13, 2014
Code Software and Computer Adapters Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.Kreate-A-Key™ Software The market’s most comprehensive direct and indirect 575.00 690.00 821.43(BK0202XXXX) code database. Software communicates with Ultracode™ (not Ultracode™ A/T), Unocode 399, HPC Codemax, ITL9000 and 950, and Framon FRA-2001 electronic code machines. Base program Kreate-A-Key Software CD allows 3 installations. Additional licenses are available directly from www.kreateakey.com. Older versions of Kreate-A-Key may be upgraded to current year at the same website. Kreate-A-Key Master Keying (step by step creation of systems) B 191.00 229.20 272.86 MK Module*Kreate-A-Key FOR TRIAX.E-CODE ONLY!Provides interface capability w/ B 380.00 456.00 542.86 Triax Module* Triax Key Machine (includes add’l sidewinder code information) Kreate-A-Key Automotive Service Information (car opening, lock cylinder B 252.00 302.40 360.00 Auto Module* tumbler positions, transponder information, replacement cylinders) Kreate-A-Key Interface Kit for the Ilco EZ®-Code to communicate with KAK 18.40 22.08 26.29 Interface KitKeyspan USA-19HS Required for connecting computers lacking a serial port B 38.85 46.62 55.50USB Serial Adapter to Silca electronic key machines(BM0147XXXX)
Duplicators & Code Cutters for High Security Keys Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.Tri-Code H.S. 110V Electronic mahcine for cutting internal & external track 6700.00 8040.00 8815.79 “laser” style automotive keys. Cut by direct code/indirect code (most series) or duplication. Will also cut standard edge cut keys with optional “D” Jaw (page 55).Triax Quattrocode Electronic code. Includes cutter holder, USB Pen Drive (1GB). C 16412.00 19694.40 20515.00120V* Comes with R1/R12 manual clamp for cutting laser and dimple keys and engraving keys and medals. 4th axis for angulated cuts (requires optional R4 Tilting Jaw or R13 motorized Tilting Jaw).
* Optional modules may be ordered in conjunction with the base program or at any time afterwards.
Kreate-A-Key™
Tri-Code H.S.
Ilco/Silca Key Machine Optional Jaws and Accessories Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.
For 057 HS BD0720XXXX 057 HS Depth Calibration Gage Set 5.45 6.54 7.79BD0721XXXX 057 HS Vise Jaw Surface Plate Set 38.90 46.68 55.57BD0722XXXX Mercedes Clamping Adapter Set 45.00 54.00 64.29BD0723XXXX VW/Audi Clamping Adapter Ser 45.00 54.00 64.29BD0724XXXX A31 Adapter for HU101 key (2 required for 057 HS) 26.75 32.10 38.21BD0725XXXX Lexus/Toyota Wallet Key Adapter 21.80 26.16 31.14 For Bravo D700011ZB Adapter for Porsche (Ilco HU52P/HU55P Silca HU42P/HU45P) C 168.60 202.32 240.86D709576ZB Key gripping shims for Chrysler (Ilco 1793V/P1793 B 18.25 21.90 26.07 Silca CY19/CY19P)
Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.
Ultracode® Deluxe A machine and adapter combo package. The machine 13775.00 16530.00 18250.00 supplied is the original Ultracode (cuts auto and commercial keys), but equipped with a solid carbide cutter. Also included are adapters for cutting 6 & 8 cut Tibbe keys (Jaguar applications), Porsche 928 keys, and Medeco® keys. Includes Kreate-A-Key.
Triax Quattrocode
Ultracode® Deluxe
January 13, 2014 Key Machines 55
Ilco/Silca Key Machine Optional Jaws and Accessories (continued) Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.
For Crown D707830ZB Attachment for cutting standard Chicago keys by code B 144.40 173.28 206.29D709575ZB Depth measuring device for Chicago tubular keys B 77.45 92.94 110.64D900366ZR Tip Stop B 25.75 30.90 36.79 For Matrix Models D711803ZB Key gripping adapter set for VW/Audi/Porsche keys B 319.20 383.04 456.00D727645ZB A16 adapter set for clamping BMW and Land Rover B 180.70 216.84 258.14 2-track keysD708765ZB Code attachment kit for BMW 4-track keys C 472.50 567.00 675.00D708625ZB Key decoder for BMW 4-track keys C 361.20 433.44 516.00D701470ZB 5 deg. Adapter for BMW dimple keys C 91.90 110.28 131.29D705485ZB Code attachment kit for Ford and Jaguar Tibbe keys C 569.80 683.76 814.00 (6 space / 4 angle version) D705322ZB Key decoder for Ford and Jaguar Tibbe keys (6 space/ C 40.95 49.14 58.50 4 angle version) D708005ZB Key decoder for Jaguar Tibbe keys (8 space / 3 angle version) C 101.00 121.20 144.29D708165ZB Code attachment kit for Lexus/Mazda/Mitsubishi internal C 561.60 673.92 802.29 track keysD714518ZB Code attachment kit for Lexus/Mazda/Mitsubishi internal C 492.00 590.40 702.86 track (short key)D708280ZB Key decoder for Lexus/Mazda/Mitsubishi internal track keys C 410.30 492.36 586.14D708225ZB Code attachment kit for Mercedes 4-track keys C 892.50 1071.00 1275.00D708199ZB Key decoder for Mercedes 4-track keys C 404.85 485.82 578.36D708150ZB Code attachment kit for Mercedes 2-track keys C 777.00 932.40 1110.00D708200ZB Key decoder for Mercedes 2-track keys C 412.75 495.30 589.64D708910ZB Key gripping adapter set for Saab keys B 480.15 576.18 685.93D705671ZB Code attachment kit for Volvo 2-track keys C 491.40 589.68 702.00D705708ZB Key decoder Volvo 2-track keys C 350.45 420.54 500.64D707910ZB Code attachment kit for Abloy (half round) keys C 902.70 1083.24 1289.57D710026ZB Key gripping adapter set for Dom/ Corbin keys C 36.55 43.86 52.21 (DM118, DM24, etc.) D701471ZB Key gripping adapter set for Kaba keys (45 deg. Angle cuts, B 96.40 115.68 137.71 not needed for Matrix SX and SLX model machines) D701470ZB Key gripping adapter set for Keso keys (5 deg. Angle cuts C 120.05 144.06 171.50 as on KE1, KE2, KE3 keys, not needed for Matrix SX and SLX model machines) D701068ZB Key gripping adapter set for Keso keys (for edge cuts on C 38.00 45.60 54.29 KE1, KE2, KE3 keys) D705711ZB Attachment for duplicating Medeco® keys C 571.10 685.32 815.86D710705ZB Code attachment kit for Mul-T-Lock keys C 1602.50 1923.00 2289.29D711184ZB Key decoder for Mul-T-Lock keys C 194.25 233.10 277.50D701178ZB Cutter and guide set for Mul-T-Lock keys C 130.00 156.00 185.71D706965ZB Shims for elevating Mul-T-Lock keyblanks C 31.25 37.50 44.64 For Triax line of machines D917002ZR R1 Jaw for BMW/Mercedes, Lexus B 611.20 733.44 873.14D734232ZB R1+R12 Engraving Jaw (not for Triax A/T) B 1195.00 1434.00 1707.14D721118ZB R3 Jaw for Medeco® (not for Triax A/T) C 1040.60 1248.72 1486.57D722937ZB R4 Tilting Jaw (not for Triax A/T) C 1344.10 1624.92 1934.43D720759ZB R5 Volkswagenl Audi Jaw B 401.65 481.98 573.79D720965ZB R9 Tubular key jaw (not for Triax A/T) B 1036.35 1243.62 1480.50D733984ZB R12 Engraving Jaw (not for Triax A/T) B 586.00 703.20 837.14D737406ZB R13 Motorized Tilting Jaw (not for Triax A/T) B 2612.00 3134.40 3731.43BK0339XXXX R156 Jaw for 4-angle Tibbe Keys) B 769.00 922.80 1098.57BD0724XXXX A31 Adapter for Ford 10 cut key (code series 1001-11500) 26.75 32.10 38.21D726440ZB R160 Jaw (for Ford C-MAX and HU101 Ford key) B 629.00 754.80 898.57Bk0440XXXX A34 Adapter for 2013+ Ford 7 cut key (code series 11501-13000) 99.00 118.80 141.43D726239ZB R162 Jaw for two-track BMW and Land Rover B 575.40 690.48 822.00 For Tri-Code H. S. D741800ZB Edge Kit for Tri-Code H. S. (“D” Jaw) B 787.50 945.00 1125.00BK0441XXXX I3 Adapter for 2013+ Ford 7 cut key (code series 11501-13000) 59.40 71.28 84.86 For Ultracode® D908699ZR Tip Stop B 28.15 33.78 40.21D707546ZB Medeco® Jaw C 940.10 1128.12 1343.00D708710ZB Jaguar adapter (3-angle version) C 572.00 686.40 817.14D708704ZB Ford / Jaguar adapter (4-angle version) C 571.75 686.10 816.79D706127ZB Ford Chubb adapter C 360.70 432.84 515.29D711151ZB Porsche adapter C 231.55 277.86 330.79D708708ZB Abloy adapter (for half round keys) C 574.00 688.80 820.00D710378ZB Ava Chubb adapter C 325.00 390.00 464.29D711704ZB Bi-Lok Adapter C 263.55 316.26 376.50
56 Key Machines January 13, 2014
Ilco & Ilco/Orion Key Machine Cutters Whse. Dist. Net Sugg Product Dist. Dlr. Number Description LT 1-4 5+ Net Ea. Ea.
27X Flat steel key package for 008 includes #27 slotter, hardware and instructions B 45.00 54.00 64.29031-CKM Conversion kit, converts 031 to cut Folger Adam Mogul keys B 303.30 363.96 433.29804-00-51 Conversion kit converts 025 to 026 or 045 to 046 (replaces P-X23MC with SMS45 slotter) B 108.80 130.56 155.43
* Carbide cutters are extremely hard and easily damaged. They are not warranted against chipping or breakage.
Whse. Dist. Net Sugg Product Dist. Dlr. Number Description LT 1-4 5+ Net Ea. Ea.
Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.
Ilco/Orion High Security Cutter and Guide Replacements ILCO ORION Whse. Dist. Sugg. Number Number Description LT Dist. Net Net Dlr.
CU55-146 MK206.146 End Milling Cutter C 41.50 49.80 59.29CU55-148 MK206.148 End Milling Cutter C 42.25 50.70 60.36KD55-147 MK206.147 Cutter Guide C 22.85 27.42 32.64KD55-149 MK206.149 Cutter Guide C 22.85 27.42 32.64CU56-028 MK206.028 End Milling Cutter C 56.65 67.98 80.93CU56-048 MK206.048 End Milling Cutter C 41.10 49.32 58.71CU56-049 MK260.049 End Milling Cutter C 41.10 49.32 58.71CU56-116 MK260.116 End Milling Cutter C 41.10 49.32 58.71CU56-091 MK260.091 End Milling Cutter C 41.50 49.80 59.29KD56-047 MK260.047 Cutter Guide C 22.85 27.42 32.64KD56-117 MK260.117 Cutter Guide 22.85 27.42 32.64KD56-092 MK260-092 Cutter Guide C 22.85 27.42 32.64
End Milling Cutter
End Milling Cutter
January 13, 2014 Key Machines 57
Silca Key Machine Cutters Key Machine Cutter Whse. Dist. Sugg. Model Number LT Dist. Net Net Dlr.
Bravo USA D700875ZB 81.90 98.28 117.00Bravo II, Bravo III D717898ZB 108.30 129.96 154.71Bravo II, Bravo III D704861ZB Carbide (requires 726648ZB Pulley Set) B 585.80 702.96 836.86Cadet D706766ZB B 90.45 108.54 129.21Delta (A/M/S) D911868ZR B 75.40 90.48 107.71Delta Multicopy D714448ZB C 180.50 216.60 257.86Delta 2000 FO/ Plus D913645ZR (SG18) B 124.00 148.80 177.14Opera/Targa/Tech3/ D700080ZB C 49.15 58.98 70.21 TechnicaPoker Plus D700875ZB 81.90 98.28 117.00Rekord 2000 /Rekord Plus D700875ZB 81.90 98.28 117.00Speed D935282ZR B 61.70 74.04 88.14Ultracode , Ilco EZ Code D716549ZB AT-U01/U01 (AL-TiN coated) 108.15 129.78 154.50Unocode /Ultracode D716549ZB AT-U01/U01 (AL-TiN coated) 108.15 129.78 154.50Unocode /Ultracode D706128ZB (06W)* C 298.15 357.78 425.93Unocode /Ultracode D705933ZB Carbide* (AL-TIN) B 373.30 447.96 533.29Unocode 199 D734910ZB (U01W)* B 382.25 458.70 546.07
* Carbide cutters are extremely hard and easily damaged. They are not warranted against chipping or breakage.
Silca High Security Cutter & Guide Replacements Key Machine Cutter Whse. Dist. Sugg. Model Number Size LT Dist. Net Net Dlr.
Club Jr., Club D705488ZB F22 2.5 mm end mill (AL-TIN coated) 34.20 41.04 48.86Club Jr., Club D701160ZB F30 3.0 mm end mill (AL-TIN coated) 32.80 39.36 46.86Club Jr., Club F30 3.0 mm end mill Carbide 62.40 74.88 89.14 (AL-TIN coated)Crown D700077ZB 5.95 mm (H.S.S.) B 34.20 41.04 48.86Doge D701089ZB F11 2.5 mm end mill C 34.20 41.04 48.86Matrix, Ilco 057HS D740448ZB F44 2.0 mm (H.S.S) 75.00 90.00 107.14Matrix, Ilco 057HS F44SPL 2mm end mill (AL-TIN coated) 46.20 55.44 66.00 for 80000 Lexus codes Matrix, Ilco 057HS D705488RA F22 2.5 mm end mill (AL-TIN coated) 34.20 41.04 48.86Matrix, Ilco 057HS D740423ZB F22W* 2.5 mm end mill (carbide) B 76.50 91.80 109.29Tri-Code, Triax, D708742ZB H101 2.5 mm end mill (HSS) ) 84.80 101.76 121.14 Quattrocode (TI coatedTri-Code, Triax, D709238ZB W101* 2.5 mm end mill (carbide) 109.20 131.04 156.00 Quattrocode (AL-TIN)Triax, Quattrocode D711604ZB W129* 3.0 mm end mill (carbide) 277.75 333.30 396.79 (AL-TIN)Tri-Code, Triax D737688ZB W302* (80000 series Lexus codes only) 255.65 306.76 365.21Key Machine Guide Whse. Dist. Sugg.Model Number Size LT Dist. Net Net Dlr.Club Jr., Club D905487RA (T22) 2.5 mm 22.85 27.42 32.64Club Jr., Club D901159RA (T30) 3.0 mm 19.75 23.70 28.21Doge D901088RA (T11) 2.5 mm C 19.05 22.86 27.21Matrix, Ilco 057HS D905487RA (T22) 2.5 mm 22.85 27.42 32.64Matrix, Ilco 057HS D909147RA (T44) 2.0 mm 23.90 28.68 34.14Triax-e.code and A/T D917259ZR U103-TT/U111 (track key decoder) B 49.00 58.80 70.00Triax -e. code D917260ZR U102-TT (dimple key decoder) B 95.60 114.72 136.57
* Carbide cutters are extremely hard and easily damaged. They are not warranted against chipping or breakage.
58 Key Machines January 13, 2014
Ilco and Ilco/Orion Replacement Parts & Accessories
814-00-51
12-10A
Whse. Dist. Sugg. Product No. Used on Machine Models LT Dist. Net Net Dlr.
Super Jaw 2
Super Jaw 1
008 Stylus 1-65B Guide
027A-20
STANDARD
NARR
OW
WIDE
X
Super Jaw 3
KD50-102
KD50-102A
Replacement Vise Studs Price per Pair3-57 key clamp stud ILCO 006, 008, 010, 012, 016, 2178, 2183DM, 2183HM, 4.05 4.86 5.79 2584, 2585; KeiI 10 1/2, 12 1/2, 15 1/2 1103-536-A Key Clamp Studs ILC0020, 022, 023, 024, 025, 026, 040, 045, 044, 046; 2.25 2.70 3.21 Dominion 143, 144,145, 146, 147, 132, 150; Taylor KD6AG 017 Key Clamp Stud (017-2) ILCO 017, 018 7.80 9.36 11.14KD50-55 Vise Jaw Post ILCO/ORION KD50, KD50A, KD50C, KD71A, KD15, KD12, 22.80 27.36 32.57 KD14, KD75, KD70; Taylor KD40, KD50, KD80, KD85 Replacement Wing Nuts and Clamp Handle Assemblies Price per Pair2584 Supernut Assembly ILCO 006,008,010,012,016,027,2178, 2183DM, 12.50 15.00 17.86 2183HM, 2584, 2585; Keil 1 1/2, 12 1/2, 15 1/21103-264-A Wing Nuts ILCO 020, 022, 023, 024, 025, 026, 040, 045, 044, 046; 10.00 12.00 14.29 Dominion 143, 144, 145, 146, 147, 132, 150; Taylor KD6AG017 Wing Nut Assy. (017-8) ILCO 017, 018 10.00 12.00 14.291-59 Vise Thrust Bearings Fits most ILCO US produced machines 6.70 8.04 9.57 Replacement Brushes Price Each814-00-51 Nylon Brush (Tay KD10A) Replacement for most ILCO, Taylor Lock, and Dominion 8.90 10.68 12.71 Lock machines. 3 dia. with 1/2 arbor hole 12-10A Wire Brush Replacement for most ILCO, Taylor Lock, and Dominion 7.30 8.76 10.43 Lock machines. 3 dia. with 1/2’ arbor hole KD50A-102B Nylon Brush Replacement for ILCO/ORION (KD50A, KD71A, etc.) 10.55 12.66 15.07 machines using a 3 dia., 10mm arbor hole nylon brush D301267ZZ Wire Brush Replacement for ILCO/ORION machines using a 15.60 18.72 22.29 3 dia., 10mm arbor hole KD50-102 Replacement for ILCO/ORION KD85 and other models B 12.90 15.48 18.43 using a 2 dia., 10 mm arbor hole wire brush. KD50-102A Wire Brush Replacement for Taylor Lock Co. KD50 machine B 10.60 12.72 15.14 using a 2 1/2 dia., 10 mm arbor hole wire brush. KD85-102B Nylon Brush Replacement for ILCO/ORION KD85 and other models 5.70 6.84 8.14 using a 2 dia., 10 mm arbor hole nylon brush Replacement Vise Jaws Price per Pair Super Jaw 3 (4-way) Premium replacement for ILCO and Domion Lock 70.00 84.00 100.00 machines using chromed 4-way vise jaws. Special alignment bushing provides added clamping force. This is the standard Jaw on the 040HD, 044HD, 045HD and 046HD and optional for other models equipped with Super Jaw 2. Super Jaw 2 (4-way) Replacement for ILCO, Dominion and Taylor Lock 44.35 53.22 63.36 machines using chrome plate 4-way vise jaws. The Super Jaw 3 is also a replacement option for the Super Jaw 2 Super Jaw 1 (2-way) Super Jaw 1 (2-way) Replacement for all current 47.00 56.40 67.14 ILCO machine using 2-way vise jaws. Price EachKD50-J Vise Jaw Set Replacement for ILCO, ORION, and Taylor Lock Co. 174.55 209.46 249.36 KD50, KD50A, KD50C, KD71, KD71 A machines (Sold as a complete assembly. Order two if replacing both vises.) 057 HS Vise Jaw Surface Plate Set Replacement vice jaw surface plate set for 057 HS 38.90 46.68 55.57 Replacement Cutter Guides Price Each1-65B Guide ILCO 006, 2183DM, 2183HM; Keil 11/2 C 14.80 17.76 21.14008 Stylus ILCO 008, 008A,190KM 44.00 52.80 62.86009B Guide ILCO 009B 10.90 13.08 15.57017 Cutter Guide ILCO 017, 018 15.90 19.08 22.71025 Cutter Guide ILCO 025; DL 145M, 023 B 17.35 20.82 24.79026 Cutter Guide (.030) ILCO 026 17.60 21.12 25.14027A-20 (New Style) ILCO 027A 9.90 11.88 14.14029A Cutter Guide ILCO 029A B 26.05 31.26 37.21040 Cutter Guide (BD0544XXXX) ILCO 040 (beige cover only) 19.20 23.04 27.43040 Cutter Guide (BD0660XXXX) ILCO 040/040HD Peformance Series 18.30 21.96 26.14040A/044 Cutter Guide (Sargent) ILCO 040/040HD Peformance Series 50.85 61.02 72.64044 Cutter Guide (BD0660XXXX) ILCO 044/044HD Performance Series 18.30 21.96 26.14
January 13, 2014 Key Machines 59
Ilco and Ilco/Orion Replacement Parts & Accessories (continued) Whse. Dist. Sugg. Product No. Used on Machine Models LT Dist. Net Net Dlr.
Replacement Cutter Guides (continued) Price Each040A/044 Cutter Guide (Sargent) ILCO 044/044HD Peformance Series 50.85 61.02 72.64045 Cutter Guide (BD0659XXXX) ILCO 045/045HD Performance Series 18.30 21.96 26.14045 Cutter Guide (Sargent) ILCO 045/045HD Performance Series 27.35 32.82 39.07046 Cutter Guide (BD0422XXXX) ILCO 046/046HD Performance Series 26.00 31.20 37.14KD50-89 ILCO KD50; Taylor KD50, KD40, KD71 B 32.40 38.88 46.29KD50-89A ILCO KD50A, KD71A guard type B 32.40 38.88 46.29KD50A-89A ILCO KD50A, KD50C, KD71A standard 32.40 38.88 46.29 Replacement Key Rests and Adapters Price Each27B (129089) Key Rest for Best Type Keys C 22.10 26.52 31.5726A (129187) Key Rest for Standard Cylinder Keys C 22.10 26.52 31.5726C (129167) Key Rest for Large Cylinder Keys C 28.80 34.56 41.14831-00-11 (BD0203XXXX) Ford Shoulder Gage Adapter 2.30 2.76 3.29KD50-112 Service Pin 1.2 mm 10.00 12.00 14.29KD50-113 Service Pin 1.2-1.7 mm 10.00 12.00 14.29KD50-111 Service Bar 10.00 12.00 14.29EZ-TS1 Tip Stop Gage for EZ Code and 057 HS 3.00 3.60 4.29EZ-WR1 Wrench Set for EZ Code 10.80 12.96 15.43BD0700XXXX Magnetic Accessory Tray - fits EZ Code and KD50 machines 6.90 8.28 9.86BD0724XXXX A31 Adapter for cutting HU101 High Security 2-track keys 26.75 32.10 38.21BD0725XXXX Adapter for cutting Lexus/Toyota High Security Wallet Key 21.80 26.16 31.14 Price Per Pair3-62F Straight wires, to shim up small and narrow keys 2.65 3.18 3.79SCA-1 Adapter for cutting Schlage 1307A keys B 2.10 2.52 3.00SCA-2 Adapter for cutting Schlage 1307W keys B 2.10 2.52 3.00FOA-1 Adapter for cutting Ford keys B 7.00 8.40 10.00BD0673XXXX Adapter for cutting GM Double Sided Key B 1.20 1.44 1.71BD0699XXXX Adapter for cutting GM Z keys B 5.45 6.54 7.79BD0715XXXX Adapter for cutting Toyota TR47 Keys B 5.20 6.24 7.43BD0722XXXX Adapter for cutting Mercedes High Security 2 track keys B 45.00 54.00 64.29BD0723XXXX Adapter for cutting VW/Audi, Porsche, BMW, Rover B 45.00 54.00 64.29 High Security 2-track keys D709576ZB Key gripping shims for Chrysler (Ilco 1793V/P1793 Silca 18.25 21.90 26.07 CY19/CY19P)
KD50-89 KD50-89A
27B 26A
26C 3-62F
SCA-1
SCA-2 FOA-1
831-00-11
KD50-111 KD50-112/113
Silca Replacement Parts & AccessoriesKey Machine
Model BrushStud
Jaw PinGuide Stylus
ViseJaw
Wing NutClamp Handles
Bravo USA D301840ZZ D905278ZR D904866ZR D926495ZR D902170ZRBravo II D301840ZZ D905278ZR D717899ZB D926495ZR D902170ZRBravo III D925102ZR D927877ZR D925121ZR D926495ZR D902170ZRBravo III With EZ-Jaw D925102ZR D927877ZR D925121ZR D926495ZR D902170ZRRekord 2000 D304764ZZ D911939ZR D911932ZR D912546ZR D911679ZRDelta, Delta Plus D304764ZZ D911939ZR D911966ZR D912546ZR D911679ZRPoker Plus D301840ZZ D901345ZR D904569ZR D904575ZR D902170ZRRekord Plus D301840ZZ D401612TA D404400BA D904152ZR D902201ZRScout D304764ZZ - D405371TA D902087ZR D900823ZRSpeed D934985ZR D934644ZR D934962ZR D935732ZR D935219ZRCadet D304764ZZ D9067732ZR D906767ZR D907514ZR D906774ZR
The chart above lists the most commonly used replacement parts. The prices for these parts are listed below.
60 Key Machines January 13, 2014
Product Whse. Dist. Sugg. Number Description / Used on Machine Models LT Dist. Net Net Dlr.
Silca Replacement Parts & Accessories (continued)
Replacement Brushes Price EachD301840ZZ Tynex brush, Bravo USA, Bravo II, Poker Plus 26.30 31.56 37.57D925102ZR Bravo III 29.60 35.52 42.29D304764ZZ Tynex Brush, Rekord 2000, Delta, Delta Plus, Cadet 20.45 24.54 29.21D301380ZZ Steel Brush, Rekord Plus C 17.20 20.64 24.57D934985ZR Tynex brush, Speed B 9.05 10.86 12.93 Replacement Jaw Pins/Studs D905278ZR Bravo USA, Bravo II B 30.55 36.66 43.64D927877ZR Bravo III B 30.70 36.84 43.86D911939ZR Rekord 2000, Delta Series B 17.00 20.40 24.29D901345ZR Poker Plus C 18.00 21.60 25.71D401612TA Rekord Plus C 15.90 19.08 22.71D906773ZR Cadet C 17.40 20.88 24.86D934644ZR Speed B 7.00 8.40 10.00 Replacement Cutter Guides D904866ZR Bravo USA B 43.05 51.66 61.50D717899ZB Bravo II B 36.95 44.34 52.79D925121ZR Bravo III 42.20 50.64 60.29D911932ZR Rekord 2000 C 40.75 48.90 58.21D911966ZR Delta A, Delta M, Delta S C 34.45 41.34 49.21D404400BA Rekord Plus C 49.30 59.16 70.43D405371TA Scout C 25.00 30.00 35.71D906767ZR Cadet C 31.75 38.10 45.36D934962ZR Speed B 10.45 12.54 14.93 Replacement Vise Jaws D926495ZR All Bravo Models B 226.80 272.16 324.00D912546ZR Rekord 2000, Delta Series B 65.00 78.00 92.86D904575ZR Poker Plus B 99.45 119.34 142.07D904152ZR Rekord Plus C 99.45 119.34 142.07D902087ZR Scout C 77.65 93.18 110.93D935732ZR Speed B 31.55 37.86 45.07 Replacement Clamp Handles D902170ZR Bravo USA, Bravo II, Bravo III, Bravo III w/EZ-Jaw 31.00 37.20 44.29D911679ZR Rekord 2000, Delta Series 14.65 17.58 20.93D902201ZR Rekord Plus C 20.00 24.00 28.57D900823ZR Scout C 11.80 14.16 16.86D906774ZR Cadet C 6.75 8.10 9.64D935219ZR Speed B 12.35 14.82 17.64 Adapters and Accessories D416658LR Silca Z3 Calibration Key 17.25 20.70 24.64 Used with Unocode and Ultracode key machines (card of 5) EZ3 Calibration Key for Ilco EZ-Code key machine; (pack of 5) 13.15 15.78 18.79GM Z-Adapter Accessory clamping Adapter for GM Z-keyway keys 5.45 6.54 7.79 (Ilco B111, etc.) (pair) Toyota Adapter Accessory clamping Adapter for Toyota TR 47 type keys 5.45 6.54 7.79D901561ZR Setting Keys 19.05 22.86 27.21D412507BA Tip Stops for Delta Series 1.45 1.74 2.07D931090ZR Tip Stop Set ( notched & flat style; for Bravo) 10.00 12.00 14.29D402299ZZ Service Pin 90° 1.2mm B 1.45 1.74 2.07D402300ZZ Service Pin 90° 1.7mm B 1.45 1.74 2.07132904 Shim Pin Universal (EZ-Code) 1.30 1.56 1.86D401225ZZ Service Pin 1.7mm 0.95 1.14 1.36
January 13, 2014 Key Machines 61
Transponder Equipment Lead Time 3 days
TD3AII TD3AII Detects presence, function, identity of transponder keys. 90.00 108.00 129.60Ilco EZ®-Clone PLUS Read/Write Transponder Key Cloning Device w/Snoop 1460.00 1606.00(D737090)RW4 PLUS w/ Snoop RW4 PLUS detects, reads, generates, archives and clones 1550.00 1705.00 many transponder keys including Philips and electronic clonable keys.PLUS Box w/ Snoop Add to original RW4 or Ilco EZ®-Clone to add Philips 1030.00 1,133.00(D737052ZB) cloning capability Snoop Used for capturing communications between the key and vehicle 98.50 108.35Ilco EZ®-Clone Read/Write Transponder Key Cloning Device 1,270.00 1,397.00 TKO® Complete Transponder Key Originator - Multi-line transponder diagnostic tool used to add keys to a car’s central computer. TKO® Select V2.0 Transponder Key Originator - Preloaded with 22 pieces of software and 25 transponder keys to support preloaded software. Customize with optional softwareTKO® Complete Trade-In SDD/TKO® and Cloning Accessories D723513ZB SDD/TKO® Old Style Nissan Cable (05) B 300.00 354.00 415.00D724649ZB SDD Adapter Nissan (07) B 100.00 120.00 144.00D922881ZR TKO®/SDD Lighter Adapter 58.50 70.20 84.25D922876ZR SDD/TKO® Cable OBDII (00) B 140.50 168.60 202.30D725061ZB SDD Adapter Mitsubishi (08) B 100.00 120.00 144.00D725691ZB SDD Cable Chrysler (09) B 244.50 288.00 340.00D726833ZB SDD Switch Adapter CAN Bus 499.00 585.00 690.00D929699ZR SDD Cable OBDII FORD EU (03) 250.00 300.00 360.00D727296ZB Power Adapter SDD 90.00 108.00 129.60D729045ZB SDD Adapter Chrysler CCD 100.00 120.00 144.00D922878ZR TKO®/SDD Power Cable 105.00 125.00 145.00D922880ZR TKO®/SDD Serial Cable 105.00 125.00 145.00D930715ZR TKO® Keyboard & Upper Shell 65.00 71.50 85.80D736863ZB SDD GM CAN Adapter (16) 310.00 365.00 430.00D913958ZR Battery (RW2) 53.00 58.00 69.60BM0028XXXX Cloning Power Tool Supply USA Version 68.00 75.00 90.00D927031ZR Cloning Tool Lighter Adapter 31.50 37.80 45.36D731433ZB Tex Code Advanced (RW2 Upgrade) 50.00 60.00 70.00USA-19HS KEYSPAN USA-19HS USB Serial Adapter 37.00 44.40 53.25340458 Manhattan 340458 Hi-Speed USB 2.0 Device Cable 10.50 12.60 21.00BM0015XXXX 9 Pin Male-Fem Serial Cable (10’) 6.05 7.25 8.70D937461ZR Plus Box Serial Adapter 9M-9F 15.25 18.30 22.00D930715ZR TKO® Keyboard & Upper Shell 70.00 76.50 90.80 VATS Keys 699R-00-8X VATS Key Reader 98.00 122.50 196.00PA285-00-8X PASS VATS Kit 260.00 325.00
Ilco EZ®-Clone
TD3AII
Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.
TKO®
PA285-00-8X
Auto Packages Whse. Dist. Sugg. Product No. Description Dist. Net Net Dlr.
Software Updates Lead Time 3 days Whse. Dist. Sugg. Product No. Description Dist. Net Net Dlr.
BM0029XXXX D723516ZB VW Pin Code By-Pass 159.00 175.00 201.25BM0039XXXX D724344ZB Mitsubishi Update (TKO Select Only) 159.00 175.00 201.25BM0049XXXX D726074ZB VW/Audi Type 1 & 2 Update 159.00 175.00 201.25BM0062XXXX D725567ZB Cadillac Catera Update (TKO Select Only) 159.00 175.00 201.25BM0093XXXX Subaru Update 159.00 175.00 201.25BM0094XXXX Chrysler CAN Pin Bypass Update 159.00 175.00 201.25BM0095XXXX Ford CAN PATS IV Update 159.00 175.00 201.25BM0104XXXX Chrysler CAN 2 & 3 Update 250.00 275.00 316.25BM0105XXXX Toyota CAN Update 199.00 220.00 253.00BM0106XXXX Nissan BCM Read/Conversion Update 199.00 220.00 253.00BM0107XXXX Mazda CAN 1 Update 155.00 170.50 196.00BM0108XXXX Kia Amanti/Hyundai Azera Update 159.00 175.00 201.25BM0110XXXX Volkswagen CAN Update 159.00 175.00 201.25BM0111XXXX Nissan CAN, PROX & IK Update 299.00 330.00 380.00BM0112XXXX Chrysler Fobik A Update 299.00 330.00 380.00BM0117XXXX Ford CAN PATS 5 Update 199.00 220.00 253.00BM0118XXXX Honda CAN 1 Update 199.00 220.00 253.00BM0126XXXX GM Basic Update 299.00 330.00 380.00BM0127XXXX GM CAN Update 299.00 330.00 380.00BM0128XXXX Honda CAN 2 Update 299.00 330.00 380.00BM0129XXXX Mazda CAN Supplement Update 105.00 115.50 135.00BM0130XXXX Toyota IRKE Update 159.00 175.00 200.00BM0136XXXX Hyundai/Kia CAN Update 155.00 170.50 195.00BM0137XXXX Pontiac GTO Update (TKO Select Only) 155.00 170.50 195.00BM0138XXXX Niss/Infiniti Type 3 & 4 Update (TKO Select Only) 365.00 400.00 460.00BM0140XXXX GM Basic Type 3 Update 105.00 115.50 135.00BM0141XXXX Honda CAN Type 11 Update 165.00 181.50 210.00BM0142XXXX 2010 Ford CAN & Prox Update 375.00 412.50 475.00BM0143XXXX Mitsubishi CAN Update 375.00 412.50 475.00BM0144XXXX Mazda CAN 2 Update 235.00 258.50 300.00BM0151XXXX GM Remotes (RKE) Update 285.00 313.50 360.00BM0152XXXX Mazda CAN Type 3 Update 159.00 175.00 201.25BM0153XXXX Toyota Prius (2004-2008) Prox RKE Update 159.00 175.00 201.25BM0154XXXX Hyundai/Kia Remotes Update 159.00 175.00 201.25BM0157XXXX Mazda Prox/RKE Update 250.00 275.00 316.25BM0158XXXX 2011 Ford 80 Bit System Update 299.00 330.00 380.00BM0162XXXX Toyota Type 5 “G” System Update 399.00 438.90 505.00BM0163XXXX Chrysler Fobik B W/ PIN Read Update 350.00 385.00 440.00BM0170XXXX Chrysler Fobik Gen #4 299.00 330.00 380.00BM0171XXXX Fiat 500 250.00 275.00 316.25BM0172XXXX Ford Keypad Code Read 250.00 275.00 316.25BM0173XXXX Ford Fiesta/Focus 2012 299.00 330.00 380.00BM0180XXXX SDD & TKO Software Update GM Prox & Switchblade Key 299.00 330.00 380.00BM0181XXXX SDD & TKO Software Update Hyundia/Kia Prox 299.00 330.00 380.00BM0182XXXX SDD & TKOSoftware Update Nissan Prox Gen 2 299.00 330.00 380.00
January 13, 2014 Key Machines 63
Engrave-It™ Lead Time 3 days Pkg. Whse. Dist. Sugg. Product No. Description Qty. Dist. Net Net Dlr.
Engrave-It™ PRO
Electronic Key Marker Whse. Dist. Sugg. Product No. Description LT Dist. Net Net Dlr.
Marker 2000 Electronic machine for marking keys, cylinders, etc. 110V-AC 4699.00 5638.80 6526.39 AccessoriesBL0005XXXX C7 Universal Jaw for key tag and cylinder marking C 1132.70 1359.24 1618.14BL0008XXXX Rings for use with C7 jaw for key tag and cylinder marking C 143.30 133.20 204.71BJ0702XXXX Marker 2000 computer software (for enhanced marking,archive C 682.50 819.00 975.00 and design capabilities; includes software protection device)
Marker 2000
Engrave-It PRO Electronically controlled engraving system. Capable 7,135.00 8,562.00 8,918.75 of engraving keys, rim / mortise / IC core cylinders, identificataion tags, and a large variety of other items. All holders are sold seperately. Also available in 220V version Engrave-It PRO Accessories EIP-Stylus Replacement diamond tip engraving stylus 40.80 48.96 58.29EIP-010 Cutter .010” carbide cutter 44.30 53.16 63.29EIP-020 Cutter .020” carbide cutter 44.30 53.16 63.29BA0300XXXX USB to 10/100mBPS Network adapter (Trendnet 41.60 49.92 59.43 TU2-ET100) used to add a network port to any USB port equipped computer. Useful option for 2009 and and later Engrave-It PROs EIP-MM1 Multi-Mat 65.00 78.00 92.86BA0239XXXX 300012-00 replacement flex spring for fixtures (bag of 5) 9.00 10.80 12.86 Engrave-It™ PRO Specialty Holders EIP-Holder-1 Face of Ilco Mortise and Rim Cylinders holds 4 cylinders 140.00 168.00 200.00EIP-Holder-2 Sides of traditional “flat face” 7-pin “Best” type SFIC 140.00 168.00 200.00 cores holds 30EIP-Holder-3 Sides of traditional “flat face” 6-pin “Best” type SFIC 140.00 168.00 200.00 cores holds 30EIP-Holder-4 1.5” x .750” anodized American brand aluminum 30.00 36.00 42.86 padlock holds 15EIP-Holder-5 1.75” x .750” anodized American brand aluminum 30.00 36.00 42.86 padlock holds 15EIP-Holder-6 Sides of Schlage LG. format IC cores holds 20 140.00 168.00 200.00EIP-Holder-7 Sides of 7-pin Small format IC cores with plug 140.00 168.00 200.00 protrusion holds 30EIP-Holder-8 Sides of Medeco Large format IC cores holds 20 140.00 168.00 200.00EIP-Holder-9 Sides of Schlage/Ilco Key-In-Knob cylinders holds 12 140.00 168.00 200.00EIP-Holder-10 Sides of Medeco Keymark SFIC cores with plug 140.00 168.00 200.00 protrusion holds 20EIP-Holder-11 Pet tags and metal plates (Engrave-It items) holds 57.45 68.94 82.07 one of each itemEIP-Holder-12 Sides of 6-pin Corbin/Russwin format LFIC cores 140.00 168.00 200.00 (accomodates Medeco equivalent core) holds 20 EIP-Holder-13 Sides of Medeco Key-In-Knob cylinder (Schlage 140.00 168.00 200.00 equivalent) holds 16EIP-Holder-14 Sides of Yale LFIC 6-Pin cores holds 16 140.00 168.00 200.00EIP-Holder-15 Sides of Yale LFIC 7-Pin cores holds 16 140.00 168.00 200.00EIP-Holder-16 Sides of 6-pin SFIC cores with plug protrusion holds 24 140.00 168.00 200.00EIP-Holder-17 Face of SFIC cores (6 or 7-Pin / combinated & 273.00 327.60 390.00 uncombinated) holds 35 EIP-Holder-18 Yale, Abus 831C45 and Best 11B padlocks (Center of face) 230.00 276.00 328.57EIP-Holder-19 Yale Padlocks (Edge Area) 230.00 276.00 328.57EIP-Holder-20 1” x 2-1/4” Oval Brass Tags holds 20 140.00 168.00 200.00EIP-Holder-21 1-1/4” Round Key Tags holds 20 225.00 270.00 321.43EIP-Holder-22 EIP-Holder-23 EIP-Holder-24 Medeco/Keymark KIK Cylinder (sides) holds 16 140.00 168.00 200.00EIP-Holder-25 Medeco mortise cylinder plug (face) holds 35 140.00 168.00 200.00EIP-Holder-26 Military ID Tag 1-3/16” x 2” holds 16 140.00 168.00 200.00 Engrave-It™ PRO Key Holders (others available by special order) EIP-KH1 Schlage keys (SC1/SC4 head shape & blade length) 140.00 168.00 200.00 holds 24 keysEIP-KH1RH Schlage keys (SC1/SC4 Taylor Line key w/reduced 140.00 168.00 200.00 head) holds 24 keys
Important! When ordering the En-grave-It™, Engrave-It™ PRO and the Engrave-It™ XP please provide us with the end-user information (Company name and shipping ad-dress) for warranty registration and direct shipping (where possible). These machines are shipped direct to the end-user unless otherwise indicated on your PO. Standard lead times for Engrave-It line of machines is 14 days.
64 Key Machines January 13, 2014
Pkg. Whse. Dist. Sugg. Product No. Description Qty. Dist. Net Net Dlr.
Pkg. Whse. Dist. Sugg. Product No. Description Qty. Dist. Net Net Dlr.
Engrave-It™ (continued) Lead Time 3 days
EIP-KH57 Hafele Junnie All Metal holds 24 keys 140.00 168.00 200.00EIP-KH58 Hafele Junnie blade only holds 24 keys 140.00 168.00 200.00EIP-KH59 Folger Adams, Paracentric holds 3 keys 140.00 168.00 200.00EIP-KH60 Folger Adams, Mogul holds 12 keys 140.00 168.00 200.00EIP-KH61 Hafele Compx Timberline KY-300 holds 21 keys 140.00 168.00 200.00EIP-KH62 InstaKey small head Medeco Look-A-Like (mirror 140.00 168.00 200.00 image of EIP-KH14) holds 24 keysEIP-KH63 Ilco 1011 Corbin Russwin Key style holds 21 keys 140.00 168.00 200.00EIP-KH64 Abus OEM padlock key holds 21 keys 140.00 168.00 200.00EIP-KH65 Ilco 1597/1598/1599 Hayworth key style holds 21 keys 140.00 168.00 200.00EIP-KH66 Schlage Primus Everest 29™ XP High Security Key 140.00 168.00 200.00Engrave-It XP Engraves multiple keys, IC cores (sides only), key 5,450.00 6,540.00 6,812.50 tags, luggage tags, pet tags, plates, and more. XP model trays are mounted on a smaller 6” x 8” platform. Engrave-It™ XP Accessories EIP-Stylus Replacement diamond tip engraving stylus 40.80 48.96 58.29EIP-010 Cutter .010” carbide cutter 44.30 53.16 63.29EIP-020 Cutter .020” carbide cutter 44.30 53.16 63.29BA0300XXXX USB to 10/100mBPS Network adapter (Trendnet 41.60 49.92 59.43 TU2-ET100) used to add a network port to any USB port equipped computer. Useful option for 2009 and and later Engrave-It PROs BA0239XXXX 300012-00 replacement flex spring for fixtures (bag of 5) 9.00 10.80 12.86 Engrave-It™ XP Specialty Holders XP-Holder-2 Sides of traditional “flat face” 7-pin “Best” type SFIC 105.00 126.00 150.00 cores holds 12XP-Holder-3 Sides of traditional “flat face” 6-pin “Best” type SFIC 105.00 126.00 150.00 cores holds 15XP-Holder-11 Pet tags and metal plates (Engrave-It items) holds 105.00 126.00 150.00 one of each item Engrave-It™ XP Key Holders (others available by special order) XP-KH1 Schlage keys (SC1/SC4 head shape & blade length) 105.00 126.00 150.00 holds 12 keysXP-KH2 Best style keys (SFIC core) holds 12 keys 105.00 126.00 150.00XP-KH3 Ilco Neuter Bow keys (non-embossed head) holds 12 keys 105.00 126.00 150.00XP-KH10 Schlage Everesst/Primus head key style holds 12 keys 105.00 126.00 150.00XP-KH15 Medeco large square head key style holds 12 keys 105.00 126.00 150.00Engrave-It Engrave-It Marking System - ( with keyboard, 3 1 3,530.00 4,236.00 4,415.00Marking System holders, and 300 assorted pet tags) Engrave-It™ Accessories stylus-1 Replacement diamond tip engraving stylus 1 16.05 19.26 22.93ST-1 Stylus replacement tool 1 6.45 7.74 9.21EI PRO BELT 1 Replacement spindle belt 1 0.35 0.42 0.50KB-1 Replacement keyboard for Serial #EI 1152 and lower 1 54.00 64.80 77.14KB-1A Replacement keyboard for Serial #EI 1153 and higher 1 30.90 37.08 44.14 Replacement Tags Pet Tags - chrome plated and anodized aluminum Price per PackageTAG-BONE-1L Large chrome plated bone 10 9.95 11.94 14.21TAG-BONE-2L Large blue bone 10 9.95 11.94 14.21TAG-BONE-3L Large red bone 10 9.95 11.94 14.21TAG-BONE-4L Large pink bone 10 9.95 11.94 14.21TAG-BONE-5L Large purple bone 10 9.95 11.94 14.21TAG-BONE-6L Large black bone 10 9.95 11.94 14.21TAG-BONE-7L Large gold bone 10 9.95 11.94 14.21TAG-BONE-1S Small chrome plated bone 10 9.95 11.94 14.21TAG-BONE-2S Small blue bone 10 9.95 11.94 14.21TAG-BONE-3S Small red bone 10 9.95 11.94 14.21TAG-BONE-4S Small pink bone 10 9.95 11.94 14.21TAG-BONE-5S Small purple bone 10 9.95 11.94 14.21TAG-BONE-6S Small black bone 10 9.95 11.94 14.21TAG-BONE-7S Small gold bone 10 9.95 11.94 14.21TAG-HEART-1L Large chrome plated heart 10 9.95 11.94 14.21TAG-HEART-3L Large red heart 10 9.95 11.94 14.21TAG-HEART-4L Large pink heart 10 9.95 11.94 14.21TAG-HEART-5L Large purple heart 10 9.95 11.94 14.21TAG-HEART-6L Large black heart 10 9.95 11.94 14.21TAG-HEART-7L Large gold heart 10 9.95 11.94 14.21TAG-HEART-1S Small chrome plated heart 10 9.95 11.94 14.21TAG-HEART-3S Small red heart 10 9.95 11.94 14.21
Engrave-It™
styllus-1
Engrave-It™ XP
66 Key Machines January 13, 2014
Pkg. Whse. Dist. Sugg. Product No. Description Qty. Dist. Net Net Dlr.
Engrave-It™ (continued) Lead Time 3 days
TAG-HEART-4S Small pink Heart 10 9.95 11.94 14.21TAG-HEART-5S Small purple heart 10 9.95 11.94 14.21TAG-HEART-6S Small black heart 10 9.95 11.94 14.21TAG-HEART-7S Small gold heart 10 9.95 11.94 14.21TAG-CIRCLE-1L Large chrome plated circle 10 9.95 11.94 14.21TAG-CIRCLE-4L Large pink circle 10 9.95 11.94 14.21TAG-CIRCLE-5L Large pink circle 10 9.95 11.94 14.21TAG-CIRCLE-6L Large black circle 10 9.95 11.94 14.21TAG-CIRCLE-7L Large gold circle 10 9.95 11.94 14.21TAG-CIRCLE-1S Small chrome plated circle 10 9.95 11.94 14.21TAG-CIRCLE-4S Small pink circle 10 9.95 11.94 14.21TAG-CIRCLE-5S Small purple circle 10 9.95 11.94 14.21TAG-CIRCLE-6S Small black circle 10 9.95 11.94 14.21TAG-CIRCLE-7S Small gold circle 10 9.95 11.94 14.21TAG-HYDRANT-3L Large red hydrant 10 9.95 11.94 14.21TAG-HYDRANT-7L Large gold hydrant 10 9.95 11.94 14.21TAG-HYDRANT-3S Small red hydrant 10 9.95 11.94 14.21TAG-HYDRANT-7S Small gold hydrant 10 9.95 11.94 14.21TAG-DT-2 Military ID blue 10 9.95 11.94 14.21TAG-DT-6 Military ID black 10 9.95 11.94 14.21TAG-DT-8 Military ID silver 10 9.95 11.94 14.21TAG-LUG-2 Luggage blue 10 13.25 15.90 18.93TAG-LUG-3 Luggage red 10 13.25 15.90 18.93TAG-LUG-6 Luggage black 10 13.25 15.90 18.93TAG-LUG-BR Luggage brass 10 16.80 20.16 24.00TAG-COL-BR Collar Tag Brass 10 16.80 20.16 24.00PLATE-SM-BR Premium brass I.D. plate (small 3/4” x 2-7/8”) 12 27.80 33.36 39.71PLATE-MED-BR Premium brass I.D. plate (medium 3/4” x 4-1/2”) 12 41.70 50.04 59.57PLATE-LG-BR Premium brass I.D plate (large 2” x 8”), requires 6 37.00 44.40 52.86 EI Holder-4LUG STRAP - 1 Luggage Tag Strap (leather) 25 7.75 9.30 11.07 Accessories EP-1 Escutcheon pins - attachment tacks for small premium 50 2.80 3.36 4.00 brass I.D. plateSR-1 Split rings (steel) - included with pet tags 50 6.10 7.32 8.71SRT-1 Split Ring Pliers (for attaching split rings) 1 5.50 6.60 7.86WS-1 Wood screws - attachment option for medium brass 25 2.65 3.18 3.79 I.D plateCS-1 Chicago screws - attachment option for medium brass 12 3.90 4.68 5.57 I.D. plateSH-1 S-hooks (stainless steel) 50 5.80 6.96 8.29CH-1 24” beaded chain (for military ID tags) 25 24.05 28.86 34.36OXIDIZER-1* Brass Plate Darkening solution 1 8.30 9.96 11.86EI HOLDER - 1 Holder for Pet Tags 1 110.00 132.00 157.14EI HOLDER - 2 Holder for Misc Tags 1 110.00 132.00 157.14EI HOLDER - 3 Holder for Keys 1 140.00 168.00 200.00EI HOLDER - 4 Holder for Large Brass Plates 1 140.00 168.00 200.00EI HOLDER - 5 Holder for Lock Cylinders (accomodates rim, 1 165.00 198.00 235.71 mortise and small format IC cylinders EI HOLDER - 7 Holder for large format IC cylinders 1 290.00 348.00 414.29PTD-1 Engrave-It Pet Tag Display 1 17.65 21.18 25.21EI Custom Logo SW Engrave-It Customer Logo Software** 1 275.00 330.00 392.86
*Cannot be shipped by air (mild acid) ** Custom logo software must be ordered using the Custom Logo Order Form (4 week lead time)
SR-1
WS-1
CS-1RVT-1
RT-1
SH-1
CH-1
EP-1
SRT-1
January 13, 2014 Key Machines 67
68 Key Machines
Kaba Ilco Sales Policy supercedes any terms and conditions stated by the purchaser.PRICES: Prices are subject to change without notice and are not guaranteed. All orders will be invoiced at net prices in effect on date of shipment.TAXES: Prices do not include any federal, state, municipal, sales or other taxes. The amount of such tax will be added to the purchase price paid by the buyer.TERMS: 1% 15 days, net 30. Kaba Ilco reserves the right to add a 1 1/2% per month carrying charge on all invoices 30 days past due. For example: an invoice dated April 15th will be considered past due on May 16th and the carrying charge will be added to the May 30th statement.ORDER ACCEPTANCE: Kaba Ilco reserves the right to refuse any orders which may be received, and will not be bound to fill any order until it has been accepted by an officer of the company at Rocky Mount, NC. If the order is declined, notifica-tion will be provided within 14 working days of receipt of the order. Kaba Ilco makes an effort to identify and correct invalid product numbers. However, orders must contain valid, complete Kaba Ilco product number to avoid delays and assure that the item(s) will be shipped correctly. Kaba Ilco will not be held responsible for errors made in the cross-referencing of competitors’ product numbers.CREDIT: Should an account become delinquent, orders in process may be held subject to review by the Credit Department. When released, orders are subject to standard lead times which will be calculated from the release date.MINIMUM ORDERS: Only orders with a new value of $100.00 (US) or more will be accepted for processing.ORDER MODIFICATIONS: Kaba Ilco will accept changes to purchase orders until they have been entered into our order processing system. Once an order has been entered, only deletions of stock products are permissible without approval. Other approved modifications are subject to a handling charge. Once initial shipment of an order has been made, additions to that order cannot be accepted.
DELIVERY: Shipping schedule estimates are based on our best judgement and cannot be guaranteed nor can these estimates be considered legally binding.FREIGHT ALLOWANCE: All shipments are F.O.B. Rocky Mount. NC. A ship-ment becomes the property of the consignee when accepted by the carrier who assumes the risk of loss or damage in transit. Any cartage, inside delivery or handling charges between freight destination and customer warehouse are to be paid by the customer. Freight will be prepaid on orders for $1000 (US) or more net to one destination with the 48 contiguous states and Canada by the routing of our choice. If customer specifies other routing, the difference will be invoiced. Priority shipments are not prepaid and may be subject to special handling charges.CLAIMS: All claims for shipping and invoicing differences must be submitted within 10 working days after receipt of shipment. Upon request, Kaba Ilco will provide the customer with information necessary to secure Proof of Delivery from carrier.RETURNS: All requests to return goods must be made within six months from date of invoice. No merchandise is to be returned without a Return Goods Authorization number from Kaba Ilco. A Return Goods Number will be assigned and a label will be sent from the factory for the returnable merchandise only. This number must be marked clearly on the outside of the carton(s) to assure proper handling. Return Goods Numbers are valid for only 60 days from day of issue. All components must be included in one package even if broken or defective. All returns are to be shipped prepaid and are subject to a handling charge. Product(s) made to order are not returnable. The issuance of a Return Goods Number does not imply that credit will be issued. All credits issued will be based on our acceptance after inspection of the returned item(s).MINIMUM ANNUAL SALES VOLUME: Kaba Ilco reserves the right to discontinue direct sales to any customer who does not meet the minimum annual sales vol-umes. The current annual sales requirement is $3000 (US).
