Date post: | 12-Feb-2016 |
Category: |
Documents |
Upload: | hummingbird-ideas |
View: | 214 times |
Download: | 0 times |
americanenvinc.com :: 251.679.6900
REMEDIATION
Demolition
Transportation
We employ project management, construction, demolition, on-site treatment and transportation services to not only stop or reverse an environmental problem but also generate revenue for our clients.
Sometimes the best choice in remediation is to demolish the abandoned or contaminated property to clear the way for new developments that create jobs, increase surrounding property values and enhance the tax base.
We offer comprehensive transportation services across North America for every type of waste. All transportation personnel comply with DOT regulations, have met OSHA training standards, and they are covered by American Environmental’s “A” rated liability insurance.
In the
environ
men
tal
ser
vices
indu
str
y, th
ere
is n
o marg
in for
err
or.
Ofte
n, a
mish
ap h
as al
read
y
occu
rred,
and
you
need
the
prob
lem re
solve
d no
w—no
t
tomor
row,
but
toda
y. An
d yo
u
need
to kn
ow w
ith ab
solut
e cer
taint
y
that
the c
ompa
ny yo
u hir
e has
the
com
mitm
ent,
capa
bilitie
s and
expe
rtise
to ge
t the
job
done
righ
t—th
e first
time.
That’
s the
kind
of co
mple
te co
nfide
nce
that
is ins
pired
by A
mer
ican
Envir
onm
ental
. We d
on’t j
ust fi
nd a
way to
com
plete
a job
. We fi
nd th
e
best
way to
ensu
re th
at th
e job
is
done
mor
e effic
iently
, safe
ly an
d with
grea
ter p
recis
ion. A
nd w
e app
ly ou
r
innov
ative
pro
cess
to ev
eryth
ing
we do—
turn
key w
aste
rem
oval
and
rem
ediat
ion, b
ulk tr
ansp
ort
tank c
leanin
g as w
ell as
indu
strial
mec
hanic
al an
d co
nstru
ction
. With
one c
all, y
ou ca
n co
nside
r the
prob
lem go
ne—
reso
lved
beyo
nd yo
ur
expe
ctatio
ns an
d with
mini
mal
downt
ime s
o you
r com
pany
can
mov
e for
ward
with th
e
busin
ess a
t han
d.
The use of pressure is a key part of any cleaning job.
But these jobs also come with another kind of pressure, which is
where our experience really comes into play. We have safely and efficiently handled
virtually every kind of remediation and emergency response project, including
hazardous materials, oil spills, contaminated soil excavation, bioremediation, industrial fire
suppression, and more. We’ve dealt with some of the world’s toughest and most demanding jobs.
We just had to be even tougher and more demanding.
Approaching
each project
from a
clean, new
perspective.
Every project and every solution has a beginning.
At American Environmental, solutions begin
before they are applied in the field. We start
each project on the drawing board, finding
new and more innovative ways to achieve our goals,
engineering and re-engineering to get the job done faster
and more efficiently than ever before. Already, this has
led to several proprietary processes that have achieved
impressive results for our clients. No two projects are
ever the same. Neither should be their solutions.
americanenvinc.com :: 251.679.6900
Tank Cleaning
Degassing
Pneumatic Excavation
We approach each tank cleaning as a unique job. We plan more, but ultimately the job is less labor intensive, more cost effective, safer, and the waste is handled in professional manner.
Our “unique approach” enables us to manage high concentrations of vapors from storage tanks, vacuum trucks, exhausts, pipelines, sumps, ships, marine barges, soil, groundwater and odor control.
Pneumatic excavation can be the most efficient and versatile process for removing waste products. In our hands, and with our approach of each job as singular, this is usually the outcome.
There’s no denying that much of what we do is dirty, dangerous work. But through
our commitment to careful planning and our dedication to training and detail, we achieve an uncompromising level of safety. Nothing comes before the well-being of the work force, the surrounding community and the environment. At American Environmental, we
have set the standard in our ability to balance safety with operational performance.
When you want it “undone” right, call us first.
No matter what the project. Whether it involves an unforeseen
disaster, regular maintenance or mechanical and construction,
there’s one way to make sure the situation
is resolved and that the job is cleanly, precisely and efficiently done. Call the pros
at American Environmental. The confidence
you place in us is the one thing that will
never be undone.
americanenvinc.com :: 251.679.6900
TANK WASH
We offer both truck, rail tank and washing services, and we can handle everything from a typical roll off container wash to a “dig out.” Each tank is purged of any product residue and vapors before cleaning begins, and the residue is drummed to be recycled or transported for approved disposal. Only after residues and vapors are removed do cleaning technicians inspect the condition of the tank interior and begin the cleaning process. We know that downtime is crucial, and we are committed to doing the job right and getting your rail or truck tanker back on the job and earning for you.
Tank cleaning involves the removal of sludge and residual
products from the interior of storage tanks to allow
inspection repair, and/or product changeover. American
Environmental offers customers turnkey services that will
assist in meeting stringent federal, state and local regulations.
These regulations pertain to emission reductions, waste
minimization and required inspection/repair intervals. American
Environmental’s services include desludging, extraction
of solids, gas freeing, temporary storage of sludge, sludge
processing, waste transportation and tank demolition. American
Environmental has API-Trained Tank Entry Supervisor Project
Managers that understand the critical nature of tank cleaning
that pertains to API standards.
• Robotic Tank Cleaning
• Mechanical Waste Removal
• Hydro Cutting (cold cutting)
• Seal Removal
• Roof Jacking and Removal of IFR and EFR’s
• Pontoon Removal
• Leg Drilling and Resetting
• Fluidization of Solids for Fuels Blending
• Auger and Belts for Solids Removal
• Sandblasting
• Dry Ice Blasting
American Environmental can clean any size tank and
process the associated sludge. Several of the more unique
processes are described in more detail below. Tank
cleaning is usually approached with a “you’ve cleaned one tank
you can clean any tank” attitude.” At American Environmental,
each tank is evaluated as to what is the least labor intensive, most
cost effective, safest and professional approach to cleaning. This
“each job is unique” approach is the cornerstone of our business.
Through planning and commitment, we will find the safest and
most cost-effective solution.
TANK CLEANING EXAMPLES:
American Environmental has extensive spill response
capabilities for both oil and hazardous materials.
Response actions are pre-planned and rehearsed for a
variety of scenarios. These include storage vessel leaks, tanker
truck spills, derailments, marine spills, pipeline ruptures and
accidental discharges to waterways. Response team members
are 40-hour OSHA HAZWOPER trained.
THE KEY TO EFFICIENT AND COST-EFFECTIVE CONTAINMENT
DURING AN ACTIVE SPILL IS TIME. With its North American
network of response teams, American Environmental can
pull together large response teams capable of expeditiously
containing and removing a variety of spilled materials.
• 24-hour emergency response
• North American network of Response Teams
• 40-hour OSHA HAZWOPER trained personnel
• Containment, treatment, removal and transportation
capabilities for turnkey response actions
Features and Benefits:
The Oil Pollution Act of 1990
requires many industrial
companies to have a spill
response plan in place.
American Environmental has
the expertise to assist with
planning and implementing
such response programs.
Air-moving, or pneumatic conveyance, is a very efficient
and versatile process for removing materials or
industrial waste contained in tanks, containers, surface
impoundments or process vessels. Using controllable suction
velocities of up to 150 mph, air-movers can convey almost any
material that will fit through an eight-inch hose over a distance
of up to 1,000 feet, depending on the material’s weight. Material
or waste is deposited into truck-mounted collector modules,
drums or other intermediate containers (e.g. vacuum-tight roll-
off containers) for transportation to its ultimate disposition.
Some air-movers have augers,
sludge pumps, cyclone
separators and pneumatic
unloading systems (often referred
to as “blow-off systems”) for a
variety of specialized applications.
Using a cyclone separator unit
(either a stand-alone unit or one built into the air-mover itself),
material collected by the air mover can be either drummed or
bagged for specialized disposal requirements.
AMERICAN ENVIRONMENTAL uses a vacuum-tight roll-off
system to be used in combination with the air-mover.
This system allows the air-mover to remain in virtually
continuous operation, which can be especially important with
large volume projects. Under this process, the air-mover loads
the vacuum-tight roll-off containers, one after another, while a
roll-off truck transports the full containers to disposal sites or
storage areas. This system can decrease elapsed project time
by up to 60 percent in comparison to using an air-mover on
a stand-alone basis. These roll-off containers can be used for
specialized waste handling or for material recovery. American
Environmental uses a process for inserting a polyethylene or
polypropylene liner inside of the vacuum-tight roll-off container
in order to capture material recovery or fulfill specialized
disposal requirements. These specialized liners can hold up to
40 cubic yards by volume and, reinforced with lifting straps, can
accommodate up to 10 tons of material.
A wide range of materials can be handled: wet, dry, non-hazardous
and hazardous. Consistency can range from fine powder to bricks.
Specialty applications include the unloading and reloading of tower
packing, process vessels, reactors and water treatment vessels.
American Environmental utilizes vacuum-tight roll-off
containers to further enhance the productivity of an air-
mover or pneumatic conveyance. This complementary
system was designed to provide customers with an efficient,
cost-saving method of removing, transporting and disposing large
waste volumes. The air-mover/roll-off combination can reduce the
time of performing a service by as much as 60 percent. Vacuum-
tight roll-off containers can be used for loading, storage and/or
transportation of reusable materials such as perlite, tower packing,
ion exchange resins and other recyclable materials. In addition,
the vacuum-tight roll-off boxes can handle hazardous and
nonhazardous wastes as well as corrosive and flammable solids.
In addition, American Environmental utilizes a process
whereby material is collected in large-volume polyethylene
or polypropylene liner bags (up to 40-cubic yards). These
liners are installed inside the vacuum containers, allowing
material to be collected for either product recovery/storage
or to fulfill specialized disposal requirements such as odor or
dust suppression. Reinforced with straps, these bags can hold
material weighing up to 10 tons.
• SLIDE-TOP, SEALED CONTAINERS are used for materials
requiring air-tight storage, such as NESHAP-regulated benzene.
• Our Roll-off equipment includes three-axle bobtail trucks
for delivering containers and in-plant services.
• All roll-off equipment operators are qualified under
DOT and OSHA regulations for handling hazardous and
non-hazardous industrial wastes.
• Increased productivity of air-moving equipment for
large volume projects.
• Enhanced material recovery capabilities.
• OUR Tractor/trailer roll-off combinations are
used for economical transportation of loaded containers
to disposal sites.
Capacities of these roll-off containers range from 20 to 40 cubic yards. Each container is capable of handling both dry waste and sludges.
• Open-top sludge boxes are also available.
American Environmental has a
wide variety of other roll-off
containers:
Features and Benefits:
American Environmental offers a broad range of
services to industrial facilities. These include cost-
effective alternatives, single-source solutions, turnkey
programs (minimizing the required number of contractors)
and outsourced capabilities from customer facilities. These
services include civil and environmental contracting services,
pond and landfill construction, utility construction, pipeline
rehabilitation, fabrication and code welding services. American
Environmental employs skilled and seasoned craftsmen to
ensure a safe and professional project completion.
Our mechanical knowledge
combined with our extensive
environmental experience
allows us to manage
environmental and
construction projects from
day one to completion.
• Shutdowns
• Pipe Fabrication
• Structural / Civil
• Maintenance Crews
• Specialty Services
American Environmental provides total transportation
services across North America. American Environmental
is permitted to transport both hazardous and
nonhazardous waste in most states, including those requiring
authority for intrastate hauls. We have a large variety of
equipment, including liquid vacuum tankers, liquid vacuum
trucks, end-dumps, vans, flatbeds and other vehicles.
Liquid vacuum tankers provide economical transportation
of bulk liquids to off-site destinations. Some are stainless
steel to handle acids or other corrosive materials. In
addition to liquids, we transport drums, ash, and other waste.
All transportation personnel comply with DOT regulations and
have fulfilled applicable OSHA training standards, ensuring
proper management and control of loads while in transit. Further,
American Environmental carries both contractor’s pollution and
transportation liability insurance with an “A” rated carrier.
American Environmental’s
transportation services
are an alternative to
third-party transportation
contractors and offer our
clients environmentally
sound, safe transportation.
Pneumatic Excavation includes both surface and subsurface
utility locating services. Pneumatic excavation can be the
most efficient and versatile process for removing waste
products. In our hands, and with our unique approach to each
job, we remove the waste efficiently and completely.
This technology is most effective when used during the
preliminary engineering phase on projects where utility conflicts
are likely to occur.
Our customers benefit FROM
significantly reduced
construction delays and
contractor CLAIMS OTHERWISE
CAUSED by unexpected
conflicts with utilities
during construction.
• The first phase of surface locating utilizes techniques and
instruments developed and perfected by the geophysical
prospecting industry, allowing technicians to identify the
horizontal trace of the line prior to actual digging.
• The second phase of subsurface locating utilizes a highly
specialized method of Pneumatic Excavation which exposes
the utility line, enabling an exact visual determination of its
location with little disruption to existing land uses or highway
traffic and no damage to the utility line itself.
PHASES:
Demolition is often the best option for abandoned or
unusable assets. The demolition of a contaminated
or abandoned property can clear the way for new
developments that create jobs, increase surrounding property
values and enhance the tax base. However, removing a sizable
structure requires planning and preparation before the first piece
of equipment enters the worksite. We always consult with the
site owners and managers that know their property best, and we
utilize this knowledge for a safe and seamless site transition.
With every demolition, environmental stewardship is a priority.
We estimate the potential value of scrap metals and recyclables
to ensure a cost-effective and environmentally friendly project.
Anticipating and executing plans to address the surrounding
community’s concerns, such as dust suppression, is a vital part of
every demolition. We will work with the owner or manager to adjust
any procedures or add polices that ensure safe surroundings.
At American Environmental, we
believe that it is paramount
that we work with the customer
and their staff to establish
project-specific timetables
and projections.
• Concrete Demolition
• Asset Recovery
• Onsite Crushing
• Decontamination
Choosing the right contractor for any project is important,
but when the project is remediation of soil, water or
vapor, selecting the right vendor is essential. Our on-site
supervisors are experienced veterans who know how to keep a
project on track and avoid time consuming delays and downtime.
Each day that your tank is out of service means lost revenue for
your company. Each degassing project should be planned in
advance to assure that all regulatory requirements will be met and
to establish a schedule for completion of work.
There are new laws that require you to maintain certain levels of
safety and air quality when emptying or cleaning tanks containing
volatile organic chemicals. The vapors left inside the tanks are
hazardous to personnel health. Proper degassing is a must.
Our “unique approach”
enables us to manage high
concentrations of vapors
from storage tanks,
vacuum truckS, exhaustS,
pipelines, sumps, ships,
marine barges and soil.
• Chemical Degassing
• Pipeline Pigging
• Inert Gas Service
• Gas Service
Remediation is project management, construction,
demolition, on-site treatment, and transportation services
applied to solve environmental contamination problems.
Remediation can range from simple soil excavation and disposal
to complex programs requiring a combination of decommissioning
and characterization or remedial technologies. Combined with
investment recovery, American Environmental’s remedial services
not only solve environmental problems, close facilities, or reduce
wastes – they can generate revenue for our clients.
Remediation varies greatly depending on the type of contaminant,
the media that is contaminated (soil, sediment, groundwater),
the regulatory agencies that have jurisdiction over the site,
the regulatory framework under which the work is performed
(CERCLA, RCRA, TSCA, voluntary action, UST regulations, etc.),
the customer’s environmental and risk preference, intended
future use of the site and many other criteria. Remediation work
is typically performed in accordance with site-specific work plans,
sampling plans, quality assurance plans, and health & safety plans
conforming to local, state and federal requirements, and the work
is usually subject to regulatory agency oversight and review.
For these reasons, an experienced remediation team is essential
to ensure proper completion. American Environmental has
implemented remediation projects and installed remedial systems
for soil and groundwater contaminated with a wide variety of
petroleum products, low-level radioactive waste, heavy metals,
chlorinated and non-chlorinated solvents, polychlorinated
biphenyls (PCBs), pesticides and mercury. American
Environmental’s experience includes both established remediation
methods and innovative techniques that can save the customer
downtime and money.
• Building demolition
• Civil and Environmental Contracting Services
• Design of closure plans and post-closure monitoring
programs for landfills, impoundments and waste piles
• Industrial facility cleanup and construction management,
on-site observation and testing for medial action or new
facility construction
• Excavation and disposal
• Rapid response studies for uncontrolled
spills of hazardous materials
• Groundwater treatment and product
recovery
Some of the specific remedial
services American Environmental
offers include:
Sludge pumping solves difficult sludge conveyance
problems. American Environmental’s pumping systems can
move large volumes (up to 3,000 gpm) of highly viscous
liquids with high solids contents (20 to 40 percent solids by
volume with particle sizes of up to 4 inches in diameter). American
Environmental has both stand-alone and self-contained units that
can be driven directly from the hydraulic system of an air-mover.
• Fly ash slurry
• Black or green liquors
• Coal fines
• Hydro-thickener sludge
• Lime slurry
• Municipal sewage and
lagoons
• Paper mill sludge
• Alum sludge
• Sand
• Clarifier and lift station
sludge
• Oil storage tank bottoms
The following are examples
of materials conveyed using
sludge pumps:
American Oilfield Services is a full service oil field
provider of oil and gas field services on the gulf coast.
At American Oilfield we define success as delivering
more than just ordinary service to our customers, rather
delivering seasoned professional with practical solutions to the
most difficult problems related to field activity. We deliver the
most up to date fleet and technology to our customers and
provide qualified and safety trained professional to see that
projects are performed in a safe and economical manner with
budget and deadline in mind.
Trucks and equipment:
• Roll off trucks
• Flatbeds and lowboys
• Winch trucks
• Vacuum tankers
• Boom trucks and cranes
Services provided:
• Roustabout crews
• Welding and fabrication
• Tank cleaning
• 24 hour spill clean up
• Pump replacements
• Tank battery construction
• Production waste disposal
• Flow line installation and
testing
• Pneumatic and hydro
excavation
• Chemical pump trucks
• Bobtail vacuum and pump trucks
• Frac tank and roll off rental
• Ground penetrating Radar(GPR)
• Track hoes, dozers, backhoes