American Flat Track Patch and Sticker Request Form
Send completed forms to: American Flat Track | 525 Fentress Blvd. Suite B | Daytona Beach, FL 32114 | Email: [email protected]
Fax: (386) 274-2335
Team Affiliation:
Name:
Phone:
Email:
Ship to Address:
City:
State, Zip, Country:
Discipline requested:
Class:
Hillclimb Motocross ATV Flat Track
Indicate the number of rider leathers, crew shirts and registered motorcycles that you have. Do not state the number of patches and stickers desired.
Sets of rider leathers:
Crew shirts:
Motorcycles:
** Patches and stickers will be shipped standard mail and may take a week to arrive. If expedited shipping is desired, please complete the section below. A FedEx or UPS account number is required.
Mark service requested: FedEx Overnight 2nd Day UPS Overnight 2nd Day
FedEx or UPS Account Number: _____________________________
Express Mail is a more cost-effective two-day service. If you’d like this service, please complete the following.
Credit Card Number:
Exp. Date:
Cardholder Printed Name:
Cardholder Signature:
mailto:[email protected]
CORRECT LOGO PLACEMENT
4”W x 1”HLeft Chest
4”W x 3”HLeft Sleeve
4.89”W x 1”HRight Sleeve
CORRECT LOGO PLACEMENT
FRONT NUMBER PLATES – SERIES AND CLASS LOGO REQUIREMENTS
In the AFT SuperTwins class, the front number plate must be 12” W by 12” T and include the
Series and Class logos as depicted.
Top: The top 1.33” of the number plate must beblack and include two (2) American Flat Track (Reversed) series logos (Size: 4” W by 1” T)
equally spaced on either side of the mounting bolt.
Bottom: Two (2) AFT SuperTwins class logos (Size: 2.54” W by 0.75” T) equally spaced on
either side of the mounting bolt.
CORRECT LOGO PLACEMENT
In the AFT Production Twins class, the front number plate must be 12” W by 12” T and
include the Series and Class logos as depicted.
Top: The top 1.33” of the number plate must beblack and include two (2) American Flat Track (Reversed) series logos (Size: 4” W by 1” T)
equally spaced on either side of the mounting bolt.
Bottom: Two (2) AFT Production Twins class logos (Size: 2.25” W by 0.75” T) equally spaced
on either side of the mounting bolt.
FRONT NUMBER PLATES – SERIES AND CLASS LOGO REQUIREMENTS
CORRECT LOGO PLACEMENT
The AFT Singles class uses yellow (Pantone C) OEM plates and must have the Series and
Class logos as depicted.
Top: The top 1.33” of the number plate must be
black and include two (2) American Flat Track (Reversed) series logos (Size: 4” W by
1” T), centered and equally spaced.
Bottom: One (1) centered AFT Singles class logo (Size: 3” W by 0.75” T).
FRONT NUMBER PLATES – SERIES AND CLASS LOGO REQUIREMENTS
2017 AFT-Patch-Sticker-Request-FormNumberPlateandUniform2020 AFT Brand Guidelines.pdfSlide Number 1Slide Number 2Slide Number 3Slide Number 4Slide Number 5Slide Number 6Slide Number 7Slide Number 8Slide Number 9Slide Number 10Slide Number 11Slide Number 12Slide Number 13
Team Affiliation 1: Team Affiliation 2: Team Affiliation 3: Team Affiliation 4: Ship to Address 1: Ship to Address 2: State Zip Country: Flat Track: OffHillclimb: OffMotocross: OffATV: OffSets of rider leathers 1: Sets of rider leathers 2: Sets of rider leathers 3: FedEx: OffOvernight: Off2nd Day: OffUPS: OffOvernight_2: Off2nd Day_2: OffFedEx or UPS Account Number: 1: 2: Cardholder Printed Name 1: Cardholder Printed Name 2: AFT Singles: OffAFT SuperTwins: OffAFT Production Twins: Off