Date post: | 07-Jul-2018 |
Category: |
Documents |
Upload: | truongtram |
View: | 223 times |
Download: | 0 times |
NOZZLE
TECHNOLOGIES
INC
AmFog
Nozzles and components for
misting, fogging and
humidifying applications
AmFog nozzles designed
for the atomization of liquids into aerosol
particles of micron size that are dispersed evenly into the environment
effectively
evaporates their output even in climates with fairly high relative humidity.
orifices and inner components are made of stainless steel
303
competitively priced
Dynamic nozzles.
rotatable stainless steel internal shaft for superior
atomization
filter and anti drip check valve
Stainless steel orifice for durability, rigidity, corrosion resistance and reliability.
Stainless steel core allows for a robust nozzle
withstanding shock and rough handling
AmFog's MODULAR approach with accessories, gives designers and users the
ability to achieve design and performance goals through greater flexibility.
ADVANTAGES
are to accomplish an extremely high emission velocity
with a low flow rate. This ability allows
throughout
the working pressure range. The nozzles' ability for better atomization,
All of AmFog nozzles'
. Bodies are made of various materials and various types (See charts).
These nozzles are ideal for a multitude of uses (Please see the application chart for
some examples of use).
All AmFog nozzles are to be highly cost effective.
The nozzles possesses a
(Most other types of nozzles are static). The internal shaft acts as a
secondary With nozzle installed facing above the
horizontal, on shutdown, the movable shaft drops and seats itself into the body to
act as a check valve.
Stainless steel results in a longer lasting misting pattern and nozzle life, outlasting
brass and plastic orifices many times over (e.g. polyacetal 4.5 times*). Stainless
steel orifices do not distort under high pressure as do certain plastic types.
More capable of (e.g. dropping) than
nozzles constructed from softer engineered materials or impingement type
nozzles.
*SOURCE:ENGINEEREDMATERIALSHANDBOOKTM VOL. 2.ENGINEERINGPLASTICSASMINTERNATIONAL
.
AMFOG NOZZLES
1
* FLOW RATES TESTED WITH WATER UNDER CONTROLLED LABORATORY CONDITIONS. FLOW RATES CAN VARY DUE TO ENVIRONMENT, FLUID VISCOSITY AND FLUID DENSITY.
** OTHER SIZES AVAILABLE ON REQUEST
0.006" 0.0070.0060.420.37
0.0080.51
0.0110.70
0.0120.75
0.15mm 0.0260.0231.161.40
0.0332.00
0.0432.60
0.0462.80
0.0362.200.0090.58
0.3mm0.012"0.4mm0.016"0.5mm0.020"
0.0452.700.0120.720.0704.200.0181.100.0835.000.0211.30
0.0482.900.0130.770.0855.100.0221.350.0885.300.0231.40
0.0633.790.0161.000.1086.500.0281.700.1136.800.0301.80
0.0281.700.0070.460.0452.700.0110.710.0563.400.0150.90
0.0784.700.0201.250.1267.580.0332.000.1509.000.0402.40
0.0885.300.0231.400.1408.400.0362.200.1589.500.0422.50
0.008" 0.0080.0070.520.45
0.0120.75
0.0150.90
0.0171.05
0.2mm 0.0330.0282.001.70
0.0462.80
0.0563.40
0.0664.00
0.0130.80
0.0503.03
0.0935.600.0261.600.1508.900.0402.400.1659.900.0432.60
0.0181.10
0.0704.20
0.0201.20
0.0764.60
0.1167.000.0301.650.1659.900.0432.600.16610.000.0452.70
0.0211.30
0.0814.90
0.0482.900.0130.770.0684.100.0181.080.1167.000.0301.850.1338.000.0352.10
0.0362.200.0090.590.0513.100.0130.820.074.200.0181.10
LPMLPHGPMGPHLPMLPHGPMGPHLPMLPHGPMGPHLPMLPHGPMGPHLPMLPHGPMGPH
AN
IMA
LA
GR
ICU
LT
UR
E
HO
RT
ICU
LT
UR
E
OU
TD
OO
R
RE
CR
EA
TIO
N
FLOWERSFOLIAR FEEDINGGREENHOUSESHYDROPONICS
ORCHARDSPLANTS
PROPAGATIONSTORAGE
TISSUE CULTUREVINEYARDS
AMUSEMENT PARKSGOLF
HOTELSLIVING AREAS
RESTAURANTSSPECTATOR AREAS
TENNIS COURTS
IND
US
TR
IAL
AVIARIESBARNSDIARYHOGS
HORSESKENNELS
LIVESTOCKPOULTRY
ZOOS
CO
OLI
NG
DIS
EA
SE &
PEST
CO
NTR
OL
DUST, A
IR &
GA
S C
ON
TRO
L
HUM
IDIF
YIN
G
WA
SH
ING
FRO
ST D
AM
AG
E
CO
NTR
OL
CH
EM
ICA
L
FERTI
LIZER
TYPICAL
USES
AIR & GASESCIRCUIT BOARDS
COILSCOOLING TOWERS
CONCRETE CURINGCONSTRUCTION
GINNINGMINING
ODOR CONTROLOUTDOOR WORK
PAPER MAKINGPLASTIC EXTRUSION
POLLUTION CONTROLRADIATORS
ROOFSSPINNINGSTORAGETEXTILES
ORIFICE
DIA. **
*
NOZZLE CHARACTERISTICS:
2
To calculate higher or lower flowrates
EXAMPLE:
from the table below. Thefollowing formula may be used.
To calculate the flow rate for a0.3mm Orifice at 300 PSI.
PSI=KNOWN PRESSUREGPM=KNOWN FLOW RATE
A) Divide 250PSI by 300PSI = 0.833B) 0.833 = 0.913C) Divide1.42 GPH by 0.913=1.55 GPH
GPM PSIGPM PSI
1 1
2 2
F
L
O
W
R
A
T
E
S
Kg/cmPSI
10150
1 4200
25350
460
45650
56800
70 1051000 1500
35500
7100
ORIFICE
O-RING
COLOR
icro physical size allows for placement ofnozzles into small confined areas normallynot possible with other types of nozzles.
o wrench required for tightening or removal.and tightening for ease of installation and quick
maintenance saves time.
-rings for leak proof seal.No tape or sealant required.
Fine AtomizationMicro Physical Size
Unobtrusive Neat AppearanceStainless Steel CoreLong Lasting & RobustLow CostHand Tightening
Self Sealing
M
NH
O
Ideal for
High Pressure Anti Drip Capability
Direct Pipe Insertion
No Extra Fittings EqualsLowers Installation Costs
S
C
pecifically designed to fit and work withADP2/3/4/5 Series and SP Series for
optimum performance.(See ADP Series and SP Series charts).
an be installed directly into rigid pipingor tubing of almost any size providing
there is adequate wall thickness.
DESIGN FEATURES
MTSERIES
Micro Physical Size Nozzleswith Direct Pipe Insertion
& Anti Drip Capability
WT .PER / 100gms / lbs
272 / 0.61
290 / 0.64
260 / 0.57
272 / 0.60
114 / 0.25
APPROX. DIM.Ht. Dia.
0.43" x 0.38"1100mm x 965mm
MATERIAL
BRASSBODY
STAINLESSSTEELBODY
ALUMINUMBODY
APPROX.ORIFICE DIA.2mm/.008".3mm/.012".4mm/.015".5mm./.020".2mm/.008".3mm/.012".4mm/.015".5mm./.020".2mm/.008".3mm/.012".4mm/.015".5mm./.020".2mm/.008".3mm/.012".4mm/.015".5mm./.020"2mm/.008".3mm/.012".4mm/.015"
.5mm./.020""
NOZZLENUMBER
0000200003000040000500032000330003400035001020010300104001050013200133001340013500202002030020400205
THREADSIZE
10/24 UNC/2A
12/24 UNC/2A
10/24 UNC/2A
12/24 UNC/2A
10/24 UNC/2A
3
Fine AtomizationStainless steel coreLong Lasting
MATERIAL
BRASS
WT .PER / 100gms / lbs
830 / 1.82
THREADSIZE
1/8" NPT
APPROX. DIM.Ht. Dia.
0.59" x 0.44" /0.5"
1500mm x 1110mm /1270mm
APPROX.ORIFICE DIA.2mm/.008".3mm/.012".4mm/.015".5mm./.020"
NOZZLENUMBER
00012000130001400015
RobustLow Cost
Filter Cartridge Insertion Capability
Filters of different micron sizesavailable for fine filtration.
(See FIL Series chart).
DESIGN FEATURES
AFSERIES
Nozzles1/8" NPT
or use with 1/8" ID Hose.arb designed for better sealing.
Fine AtomizationStainless Steel CoreLong LastingBarbFB
RobustLow Cost
Tube Insertion Capabilityan be inserted into 1/8" Tubing or can be inserted
into punctured irrigation tubing for varioushorticulture and agriculture misting requirements.
C
DESIGN FEATURES
BARBSERIES
Nozzles
MATERIAL
BRASS
WT .PER / 100gms / lbs
250 / 0.55
APPROX. DIM.Ht. Dia.
0..51" x 0.32"1300mm x 800mm
APPROX.ORIFICE DIA.3mm/.012".4mm/.015".5mm./.020"
NOZZLENUMBER
000230002400025
4
esigned to work with MT Seriesnozzles, SP Series Springs andCV Series Ball Stems for optimumperformance. Available in variouspressure shutoff capabilities.(See SP Series chart).
Anti Drip BodyD
MATERIAL
BRASS
WT .PER / 100gms / lbs980 / 2.17
APPROX. DIM.Ht. Dia.
0.693" x 0.437"1500mm x 1110mm
THREADSIZE
1/8" NPT10/24 UNC/2B
PARTNUMBER
01010
Adapter
Filter Cartridge insertion capability
deal for converting 1/8" NPT System to MT seriesnozzles in order to take advantage of capabilities,
cost and less filter cartridge replacement
ilters of different micron sizes availablefor fine filtration. (See Fil Series Chart.)
I
F
ADP2SERIES
Anti Drip Body or Adapter1/8" NPT to 10/24 UNC/2B
DESIGN FEATURES
DESIGN FEATURES
ADP3SERIES
Anti Drip Body / Extension10/24 UNC/2B12/24 UNC/2B
esigned to work with MT Series nozzles,SP Series Springs and CV Series Ball Stemsfor optimum performance. Available in variouspressure shutoff capabilities.(See SP Series Chart).
Anti Drip BodyD
ExtensionFor longer nozzle reach.
MATERIAL
BRASS
STAINLESSSTEEL
PARTNUMBER
01000010330110001133
WT .PER/100gms / lbs510 / 1.12610 / 1.35420 / 0.92510 / 1.12
APPROX. DIM.Ht. Dia.
.675" x .350"170mm x 90mm
THREADSIZE
10/24 unc/2A-2B12/24/unc/2A-2B10/24 unc/2A-2B12/24 unc/2A-2B
5
MATERIAL
BRASS
PARTNUMBER
0103001043
WT .PER / 100gms / lbs640 / 1.40650 / 1.44
APPROX. DIM.Ht. Dia.
.680" X .380"173mm x 96mm
THREADSIZE
12/24/2A-10/24/2B1/4/28/2A-12/24/2B
DESIGN FEATURES
ADP4SERIES
Anti Drip Body / Adapter12/24unc/2A To 10/24unc/2B14/28unc/2A TO 12/24unc/2B
DESIGN FEATURES
ADP5SERIES
Anti Drip Risers / ExtensionsFor direct welding or
sweating to 3/8"-1/2" OD pipe
Adapteror converting from MT Series
12/24 UNC/2A nozzles to10/24 UNC/2A nozzles
Fesigned to work with MT Series nozzles,SP Series Springs and CV Series Valve Ballsfor optimum performance. Available in variouspressure shutoff capabilities.(See SP Series chart)
Anti Drip BodyD
deal for incorporating Anti Drip device intodelivery pipe.esigned to work with MT Series nozzles,
SP Series Springs and CV Series Ball Stemsfor optimum performance. Available in variouspressure shutoff capabilities.(See SP Series chart)
Anti Drip RiserI
D
Slim unobtrusive appearance
ExtensionFor longer nozzle reach
MATERIAL
BRASS
316STAINLESS
STEEL
PARTNUMBER
01060010630106401160011630117001173
WT .PER / 100gms / lbs680 / 1.50635 / 1.40570 / 1.25640 / 1.40595 / 1.30595 / 1.30535 / 1.18
APPROX. DIM.Ht. Dia.
Bottom of curve.585" x .375
148mm x 95mmTop pf curve.252" x .375"
133mm x 95mm
THREADSIZE
10/24 UNC/2B12/24/UNC/2B1/4/28 UNC/2B10/24 UNC/2B12/24 UNC/2B10/24 UNC/2B12/24 UNC/2B
TO FITPIPE
1/2" OD
1/2" OD
3/8" OD
6
Filter Cartridgeiner filtration than mesh strainers.
Available in various filtration sizes.pecifically designed to fit
AF Series Nozzles andADP2 Series Anti Drip / Adapter
F
S
FILSERIES
Filter cartridgesfor fine filtration
DESIGN FEATURES
MATERIAL
POLY-ETHYLENE
WT .PER / 1000gms / lbs
124 / 0.275
APPROX. DIM.Ht. Dia.
0.35" x 0.26"890mm x 660mm
PARTNUMBER
0422004285
APPROXFILTERATION
20 micron85 micron
7
DESIGN FEATURES
ADP6SERIES
M / F Sleeve / ConnectorsFor placement at either end
of 1/4" OD copper pipe
esigned to work with MT Series nozzles,SP Series Springs and CV Series Ball Stemsfor optimum performance. Available in variouspressure shutoff capabilities.(See SP Series Chart).
Anti Drip BodyD
ExtensionFor longer nozzle reach and special effects.Male and female sleeve / connector readyfor soldering / brazing / sweating onto the
ends of 1/4" copper piping (precut by user).
MATERIAL
BRASS
PARTNUMBER
01008010380108001083
WT .PER/100gms / lbs585 / 1.29585 / 1.29785 / 1.73750 / 1.65
APPROX. DIM.Ht. Dia.
.675" x .375"170mm x 95mm
.705" x .375"180mm x 95mm
THREADSIZE
10/24 unc/2A12/24/unc/2A10/24 unc/2B12/24 unc/2B
MATERIAL
NBR
WT .PER / 1000gms / lbs30 / 0.065
32 / 0.07
PARTNUMBER
044020440304404
FITS
AUTO RELEASEDRAIN VALVE
ANTI DRIP
DESIGN FEATURES
Check Valve BallsReplacement Precision Balls
for DV2 and DV3 SeriesAuto Release Drain Valves
esigned to match and seal preciselywith all Series of Anti Drip Bodies.ade from a compound specifically
formulated for this type of application.emains pliable with superior sealing
qualities over a longer use cycle
Ball StemsD
M
R
DESIGN FEATURES
pecifically designed to fit and seal precisly with:MT Series NozzlesADP3 & ADP4 Series Anti Drip BodiesDV2 & DV3 Series Auto Release Drain Valves
O-RingsS
O-RingsORSERIES
Ball Stemsand
Check Valve BallsCV
SERIES
8
MATERIAL
NBR
VR
WT .PER / 1000gms / lbs15 / 0.014
15 / 0.014
PARTNUMBER
04410044120441404415
COLOR
BLACKBROWNGREEN
RED
SDSERIES
Stepped Drill
DESIGN FEATURES
MATERIAL
BRASS
WT .PER / 100gms / lbs295 / 0.65313 / 0.70
APPROX. DIM.Ht. Dia.
0.43" x 0.380"1.090mm x 965mm
THREADSIZE
10/24 UNC/2A12/24 UNC/2A
PARTNUMBER
0000000030
P1SERIES
Plugs
DESIGN FEATURES
Plug
ExampleUsed for fine tuning Mist and Fog Systems.
Where variable conditions exist (e.g. Seasonal humidity)differing amounts of mist/fog may be required over time.In order to achieve these optimum conditions, Plugs canbe interspersed into a system as required.
Stepped,DrillDesigned for single operation drilling of 10/24 UNC thread,hole and flat surface for the positive seating of O-ringson 10/24UNC/2A threaded products
MATERIAL
HSS
WT .PER / 1gms / lbs
370 / 0.074
APPROX. DIM.Ht. Dia.
3.25" x 0.375"8.25cms x 950mm
THREADSIZE
10/24 UNC/2A
PARTNUMBER
09100
9
DESIGN FEATURES
SERIES
Auto ReleaseDrain Valve
1/8" NPTDV2
AUutomatically opens at given pressure to allow for the drainage of liquid from systems.sed for the following:
The prevention of supply line freezing.The release of pressure in supply line and thusthe slowing of mineral build on nozzle heads.
MATERIAL
BRASS
WT .PER / 100gms / lbs
1.250 / 2.75
APPROX. PRESSUREON RELEASE
1 Kg/cm / 14 PSI5 Kg/cm / 70 PSI
2
THREADSIZE
1/8" NPT
APPROX. DIM.Ht. Dia.
.99" x .437"/.5"2.515mm x
1.111mm/1.270mm
PARTNUMBER
0201002015 2
10
DESIGN FEATURES
Auto Release DrainValve Springs
eplacement springsfor DV2 and DV3 Series
Auto Release Drain ValvesR
vailable in various pressure shutoff rates foroptimum performance.. Specifically designedto fit the all Anti Drip Bodies, MT Series nozzlesand CV Series Ball Stems for easy removal andinstallation.
Anti Drip SpringsA
Anti Drip & AutoRelease Drain Valve
SpringsSP
SERIES
MATERIAL
BRASSSTAINLESS
STEEL
WT .PER / 1000gms / lbs
67 / 0.14867 / 0.14817 / 0.039
APPROX. PRESSURE ATCLOSE RELEASE
1 Kg/cm / 14 PSI5 Kg/cm / 70 PSI
5 Kg/cm / 70 PSI 10 Kg/cm / 145 PSI3 Kg/cm / 35 PSI 5 Kg/cm / 75 PSI
PARTNUMBER
04010041750417004135
FITS
AUTO RELEASEAUTO RELEASE
ANTI DRIPANTI DRIP
22
222
2
DESIGN FEATURES
SERIES
Micro Physical SizeAuto ReleaseDrain Valve
DV3
A
Uutomatically opens at given pressure to
allow for the drainage of liquid from systems.sed for the following:
The prevention of supply line freezing.The release of pressure in supply line and thusthe slowing of mineral build on nozzle heads.
WT .PER / 100gms / lbs800 / 1.75
900 / 2.0
660 / 1.45
755 / 1.66
APPROX. PRESSUREON RELEASE
1 Kg/cm / 14 PSI5 Kg/cm / 70 PSI1 Kg/cm / 14 PSI5 Kg/cm / 70 PSI1 Kg/cm / 14 PSI5 Kg/cm / 70 PSI1 Kg/cm / 14 PSI5 Kg/cm / 70 PSI
2
APPROX. DIM.Ht. Dia.
.875" X .380"222mm x 965mm
MATERIAL
BRASS
STAINLESSSTEEL
PARTNUMBER
0200002005020300203502100021050213002135
THREADSIZE
10/24 unc/2A10/24/unc/2A12/24 unc/2A12/24/unc/2A10/24 unc/2A10/24/unc/2A12/24 unc/2A12/24/unc/2A
22
2
2
22
2
Micro Physical Size
Unobtrusive neat appearance
Micro physical size allows for placementof valve into small confined areas normallynot possible with other types of valves.
SERIES
Brass BarbTee FittingT3
BarbFor use with 1/4" ID Hose andMT Series Nozzles.
DESIGN FEATURES
Low ProfileUnobtrusive appearance
MATERIAL
BRASS
PARTNUMBER
03002
WT .PER / 10gms / lbs205 / 0.45
APPROX. DIM.Ht. Dia.
2.125" X 0.50"5.63cms X 1.27cms
THREADSIZE
10/24 UNC/2B
11
12
NOZZLE
TECHNOLOGIES
INC
P.O. BOX 2228 SCOTTSDALE AZ 85252-2228 USATEL: (480) 947-7345 FAX: (480) 967-2228
email: [email protected]
AmFog