GUSTO PROFESSIONAL SERIESGUSTO series, DMX digital foggers, establish their eminence in the market with unique innovation and
professional technique. Thanks to their high security and easy maintenance, GUSTO series are perfectly
adapted for locations of professional performance. There are our optional models: GT-1000, GT-1250,
GT-1800 and GT-3500, with the following characteristics:
Sharp ModularizationThe entire machine is assembled with a heating module, a pump module and a circuit module. The
innovative design completely solves the problem that the circuit and other parts interfere with one another
while dismantling for maintenance or repair. Each of the three modules is independent, and does not affect
the others, and that is what makes the maintenance so direct and easy. At the same time, you can easily
disassemble the lateral sides to take out the broken heating module or the pump module, or the rear side to
replace the circuit module. Such intelligent and ideal design makes the maintenance most humanized and
simple.
SecurityThe die-cast heating module is perfectly covered and sealed with iron shell. Even under such circumstances as
the fixture is over heating or the secure parts is out of control, no hazard will happen. Furthermore, the low-
liquid sensor detects shortage of liquid and warns the pump to cut oil supply automatically so as to prevent
from damaging or accidentally firing.
High Efficiency The die-cast heating module fastens heat transmission and therefore, shortens the heating cycle. The
break-through design of double heating pipes for GT-1800 & GT-3500 even enhances significantly the heating
efficiency.
Economical Power ConsumptionPower-saving device enables GT-1800 and GT-3500 to cut automatically power consumption during stand-by,
which impressively realizes power saving up to 50%.
ConvenienceGUSTO is a series of DMX digital foggers which can be conveniently connected with other Foggers and DMX
stage equipment for operation. Besides, the series can be operated by exteriorly connected controllers (e.g.
TC-3, DC-3, DC-3S) to control fogging time and volume. Our high-quality fog liquid is a perfect match for the
series to maximize the fogging effect.
Professio
nal Fo
g
The entire machine is assembled with a heating module, a pump module and a circuit module. Each of the three modules is independent; makes the maintenance easy and convenient.
You can easily disassemble the rear side to replace whole circuit module. Efficient, Perfect, User-friendly
Capacitated for 3500W output volume, the extraordinary GT-3500 is a
masterpiece among the professional foggers, a representative resulting
from professional high-tech. The dual-aluminum heating pipes enhance
heat transmission efficiency, and enable you to create spectacular
fogging effect without much heating time. The innovative device for
economical power consumption can save energy up to 50%.
The built-in digital display controller (DC-3S) makes the operation of
GT-3500 direct and user-friendly, while the low-liquid-level sensor
guarantees operation security. Dual-piped heating module, innovative
design of easy-disassembly shell at three sides, and direct-replacement
of modules significantly improve maintenance efficiency as well as
operation safety.
Super-powerful GT-3500 creates spectacular effects without making any
noise. The innovative oil providing system performs vaporizing process
through one-piece jointless die-cast heating module and as a result,
reduces the possibility of nozzle blockage to minimum. Even when
emitting continuously as large volume as 50,000 cu.ft/min,
the fogger still works in perfect order. Use our non-toxic high-quality
water-based liquid to maximize the fogging effect, and you
can relax and enjoy the stage performance.
GT-3500 is distinguished for its excellent
quality and perfect capability. Our
innovation continuously improves its
operation safety and makes
it the first choice
for all large stage
performance.
GUSTO Series–GT-3500
DC-3S, the built-in digital display controller makes the operation of GT-3500 direct and user-friendly. The cable of DC-3S is 10m.
Product specificationsPOWER 3300W
FUSE(230V,240V) NFB 16A
Warm Up time(min) 12
Fog Output (cu.ft/min) 50000
Tank (liters) 6.5
Bracket YES
Dimensions (LxWxH, W/Handle) 663x300x249 mm
Weight (kg) 18.5kgs
Voltage 230V, 240V /50Hz
DMX512 CH. DMX 1CH or 3CH
Matching Controller (Optional) DC-3, DC-3S
Matching Controller (Included) Built-in DC-3S
* Voltage is preset at factory and may not be changed.
Professio
nal Fo
g
Economical, Noiseless, SecureOne of the traits that distinguish GT-1800 from other foggers is the
advanced device for economical power consumption. When the
machine is standing by, it perfectly handles the heat exchange and
automatically decreases power rate up to 50%. It is unquestionably an
energy-saving expert.
Dual-piped heating module, upgraded from the single-heating-pipe
design, accelerates the speed of heat transmission and substantially
improves the heating efficiency.
Innovative oil providing system performs vaporizing process through
one-piece jointless die-cast heating module, and significantly reduces
the possibility of nozzle blockage, resulting in more purified smoke that
reflects much better visual lighting effect.
In addition to the protection by the patented low-liquid-level sensor
which automatically stops the pump when short of liquid, the design
of separating the liquid tank from the fixture itself allows the tank to
be taken off freely without breaking any wires. All the designs aim to
provide you with the maximum safety.
GT-1800, featuring economical power consumption, noiselessness
in operation and abundant production of dense fog, perfects every
performance in any large theatre or conference, and even fire drills.
GUSTO Series–GT-1800
Dual-piped heating module accelerates the speed of heat transmission and substantially improves the heating efficiency.
The patented low-liquid-level sensor which automatically stops the pump when short of liquid.
DC-3S, the built-in digital display controller makes the operation of GT-3500 direct and user-friendly. The cable of DC-3S is 10m.
Product specifications POWER 1700W
FUSE(120V) NFB 16A
FUSE(230V,240V) NFB 9A
Warm Up time(min) 5
Fog Output (cu.ft/min) 30000
Tank (liters) 6.5
Bracket YES
Dimensions (LxWxH, W/Handle) 613x300x249 mm
Weight (kg) 14kgs
Voltage 120V, 230V, 240V 50/60Hz
DMX512 CH. DMX 1CH or 3CH
Matching Controller (Optional) DC-3, DC-3S
Matching Controller (Included) Built-in DC-3S
* Voltage is preset at factory and may not be changed.
Professio
nal Fo
g
Product specifications POWER 1200W
FUSE(120V) 13A
FUSE(230V,240V) 7A
Warm Up time(min) 7
Fog Output (cu.ft/min) 20000
Tank (liters) 2
Bracket YES
Dimensions(LxWxH, W/Handle) 418x220x209mm
Weight (kg) 7.5kgs
Voltage 120V, 230V, 240V 50/60Hz
DMX512 CH. DMX 1CH or 3CH
Matching Controller (Optional) TC-3, DC-3
Matching Controller(Included) TC-3
* Voltage is preset at factory and may not be changed.
The innovative circuit module design can easily disassemble the rear side to replace whole circuit module.
Operate with our timing controller, TC-3, to control fogging interval, duration and volume and have excellent fogging effect.
GUSTO Series–GT-1250
Fashionable, Professional, AdvancedGT-1250, a professional fogger, adopts the die-cast aluminum heating
module, which speed up heat transmission and therefore, shortens
its heating time. The heating module also significantly facilitates
maintenance and replacement.
With quick and steady fogging effect, the powerful GT-1250 matches
well with the vibrant light and music on the stage and electrify the
atmosphere. Moreover, the oil providing system performs vaporizing
process through jointless die-cast aluminum heating module, and
reduces the possibility of nozzle blockage to minimum.
The new generation of GT-1250 is characterized with easy disassembly
on three sides of shell, patented design of low-liquid-level sensor, and
special design of circuit module. All the advanced technology and bold
innovation make GT-1250 more secure, convenient and humanized.
Undoubtedly GT-1250 is an excellent performer in night clubs,
exhibitions, balls and even small theater, presenting the most vivid
atmosphere and effect.
Operate with our timing controller (TC-3) or digital display controller
(DC-3, plastic casing) to control fogging interval, duration and volume
and have excellent fogging effect. The powerful optional controllers
definitely make GT-1250 a more valuable choice.
Professio
nal Fo
g
Innovative, Safe, Easily-maintainedTechnically innovated and securely guaranteed, GT-1000 occupies an
indispensable position in the market, characterizing easy maintenance
and maximal operation safety.
With the innovative shell design featuring easy disassembly on three
sides, GUSTO series make maintenance most convenient and simple.
You can directly open the lateral sides to replace the heat module or
the pump module, or open the rear side to take off the broken circuit
module. The independent design of the three modules dramatically
facilitates the maintenance.
The patented low-liquid-level sensor automatically stops the pump from
providing oil once it detects lack of liquid. This outstanding feature not
only helps to avoid burning damage, enhancing operating security, but
also successfully separates the tank from the mechanism, allowing the
tank to be taken away from the fixture anytime without breaking any
connection.
Quality guaranteed by professional technology, GT-1000 creates an
amazing effect for a ball or an exhibition with its short heating time and
large fogging volume.
GUSTO Series–GT-1000
The patented low-liquid-level sensor which automatically stops the pump when short of liquid.
The entire machine is assembled with a heating module, a pump module and a circuit module. Each of the three modules is independent; makes the maintenance easy and convenient.
Product specifications POWER 1000W
FUSE(120V) 12A
FUSE(230V,240V) 6A
Warm Up time(min) 4.5
Fog Output (cu.ft/min) 10000
Tank (liters) 2
Bracket YES
Dimensions(LxWxH, W/Handle) 378x220x209 mm
Weight (kg) 6kgs
Voltage 120V, 230V, 240V 50/60Hz
DMX512 CH. DMX 1CH
Matching Controller (Optional) LC-1X, RC-1X, TC-1X
Matching Controller (Included) LC-1X
* Voltage is preset at factory and may not be changed.
Professio
nal Fo
g
Product specifications
Model AF-1700DX AF-1700SDXCase Color Black Silver
Power 1600W 1600W
DMX Channel 2CH 2CH
Built-in Function Timing – Duration & Interval Timing – Duration & Interval
Fuse (120V) NFB 20A NFB 20A
Fuse (230V) NFB 10A NFB 10A
Output (c.ft/min) 21000 21000
Tank (Liter) 5L 5L
Warm up time (min) 8 8
Voltage 120V/60Hz,230V,240V/50Hz 120V/60Hz, 230V,240V/50Hz
Dimensions(LxWxH, W/O Bracket) 435x280x295mm(W/Handle) 435x280x295 mm(W/Handle)
Weight 10.5 kg 10.5 kg
Matching Controller(Optional) LC-5, RC-5 or TC-3X LC-5, RC-5 or TC-3X
* Voltage is preset at factory and may not be changed.
ATMOS DMX Fog Machine (AF-1700DX/AF-1700SDX)
ATMOS DMX fog machine is multi-function professional that has passed strict tests under imitated environments and certification of
safety regulations. DMX ON BOARD permits uses through connection to any DMX console. Built-in function of timing control allows
easy timing control through manual operation on the Duration & the Interval knobs.
ATMOS DMX professional is the most valuable fog machine that has been expected.
AF-1700DX/AF-1700SDX is equipped with die-cut heating module. Heating
transmission is more effective. Heating time of every fogging
circulation is shortened, and output (cu. Ft/min) based on the same
power is more abundant compared with other brand names. It can
also output continuously volumes of smoke. Problem of nozzle jam
will hardly happen.
ATMOS DMX professional has the vertical heating tube separated
from the bottom base. This design successfully blocks the noise. The
vertical heating tube occupies small space, which allows the machine to
have better volume for big and movable liquid tank, and to elevate its mobility
at the same time. When shortage of oil is detected, the safety function of low liquid
warning can automatically cut the power off of pump to prevent the interior parts from
being damaged, and to assure the safety of the machine and the using environment. Powerful output and volumes of dense smoke
puffed within a short time characterize ATMOS DMX professional as a master piece to perfectly animate performance of any large-scale
concert as well as launching ceremony. Strict and long-time environmental tests let ATMOS DMX professional be the very suitable product
used for concerts, displays, dance halls and firefighting maneuvers.
ATMOS DMX professional not only can accept DMX control, but also can select wire controller LC-5, wireless controller RC-5, or timer
TC-3X for easy control. Master/Slave synchronous control can be realized by the built-in timing control function or the optional controllers
(LC-5, RC-5 & TC-3X). Furthermore, the smoke effect can be flawless using high-quality fog liquid made by JyunYao.
Atmos DMX Fog Machines provide superior performance due to:• DMXonboard,operatebyanyadditionalDMXcontroller.
• Built-infunctionoftimingcontrolallowseasytimingcontrolthroughmanualoperationonthe
Duration & the Interval knobs. The indicating light on the back panel will indicate adjusted timing.
• Humanizedwarningfunctionforabnormalstatus:Incasethefoggerhasanyabnormal
functioning, the indicating light on the back panel will be flashing as warning to let the user be
aware of the problematic situation in time.
• Manualfoggingcanbeoperateddirectlyfromthebackpanelofthemachine.Manualfoggingis
prior to other fogging operations of the easy controller & built-in timing function. But when DMX
control is selected, all manual control functions stop.
• FoggingvolumecanbeadjustedunderDMXoperationmodeorbytheoutsideconnectedTC-3X
controller.
• Highoutputfogmachine,approx.21,000cu.ft/minoutput.
• ElectronicThermoSensing(ETS)–electronicheaterstayhotatalltimesbetweenfogblasts.
• Advancedheatersystem-aluminumdie-castheaterpreventsclogging.
• Advancedoil-levelsensordetectsshortageofoilandwarnsthepumptocuttheoilsupplyautomatically.
• Directthermalprotection.
• Master/Slavemodecanbeoperatedeitherbythebuilt-intimingcontrolorbyoutsideconnected
controller, LC-5, RC-5, or TC-3X. Simple and humanized design makes the fogger easier for use.
Fog
Mach
ine
ATMOS SERIESATMOS, a versatile effect-creator, produces a series of high-quality fog machine: AF-800/800S, AF-900/900S,
AF-1200/1200S and AF-1700/1700S .
The smart and compact series feature the unique die-cast-aluminum heater system for faster and more efficient heat transfer,
allowing them to produce dense fog continuously and reducing the possibility of nozzle blockage to minimum. The unique
design makes ATMOS series ultra-quiet during operation and also saves much space for a larger oil tank.
The series are ideal for theatres, show rooms, ballrooms and clubs use, operating with our line controllers (LC-1, LC-2S),
remote controllers (RC-1, RC-2), timing controllers (TC-1, TC-2), or DMX controller (DMX-2) for powerful fogging effect. Our
high quality water-based fog liquid is optimized for use with ATMOS fog machines.
AF-800• 700Wheater
• 5minuteheatuptime
• Approx.3500cu.Ft/minoutput
• 0.9literfluidcontainer
• Directthermalprotection
• Operatebylinecontroller(LC-2),remotecontroller(RC-2),
timing controller (TC-2)
AF-900• 700Wheater
• 5minuteheatuptime
• Approx.3500cu.Ft/minoutput
• 0.9literfluidcontainer
• Directthermalprotection
• Operatebylinecontroller(LC-1),remotecontroller(RC-1),
timing controller(TC-1), or DMX controller(DMX-2)
AF-1200• 1100Wheater
• Equippedwith
low-fluid sensors, which will automatically stop
pumping once fluid level is too low.
• 8minuteheatuptime
• Approx.7000cu.Ft/minoutput
• 2.5literfluidcontainer
• Directthermalprotection
• Operatebylinecontroller(LC-1),remotecontroller(RC-1),
timing controller(TC-1), or DMX controller(DMX-2)
AF-1700• 1600Wheater
• Equippedwith
low-fluid sensors, which will automatically stop pumping
once fluid level is too low.
• 8minuteheatuptime
• Approx.21000cu.Ft/minoutput
• 5literfluidcontainer
• Directthermalprotection
• Operatebylinecontroller(LC-1),remotecontroller(RC-1),
timing controller(TC-1), or DMX controller(DMX-2)
Atmos series specifications
ITEM NO. AF-800/800S AF-900/900S AF-1200/1200S AF-1700/1700S
Color Black or Silver Black or Silver Black or Silver Black or Silver
Power 700W 700W 1200W 1600W
Fuse (120V) T10A/250V T10A/250V T12A/250V NFB 20A
Fuse (230V, 240V) T5A/250V T5A/250V T7A/250V NFB 10A
Warm Up Time (min) 5 5 8 8
Output (cu. ft/min) 3500 3500 7000 21000
Tank (liters) 0.9L 0.9L 2.5L 5L
Voltage 120V/60Hz,230V/50Hz 120V/60Hz,230V/50Hz 120V/60Hz,230V/50Hz 120V/60Hz,230V/50Hz
Dimensions(LxWxH, W/O Bracket)
235x149x136 mm 235x149x136 mm 310x220x161 mm 435x280x395 mm(W/Handle)
Weight (kg) 3.3 3.3 5.4 7
Matching Controller(Optional) LC-2S,RC-2,TC-2 LC-1,RC-1,TC-1,DMX-2 LC-1,RC-1,TC-1,DMX-2 LC-1,RC-1,TC-1,DMX-2
* Voltage is preset at factory and may not be changed.
Fog
Mach
ine
FOG MYTH SERIESFOG MYTH, a master of atmosphere inspiration, presents a new range of fog machines: FM-800, FM-1200, and FM-1800.
Boasting a unique heating system that reduce dramatically the heating time, Fog Myth series can produce fog powerfully and
steadily without making any noise.
Produced under stringent quality control system, Fog Myth series aim to provide maximum operation safety for users. The
professional “heavy-duty” fog machines of FM-1200 & FM-1800 are equipped with low-fluid sensors, which will automatically
stop pumping once fluid level is too low.
FOG MYTH series are well matched with our line controllers (LC-1, LC-2S), remote controllers (RC-1, RC-2), timing controllers
(TC-1, TC-2), and DMX controller (DMX-2) and are perfect for nightclubs, exhibition halls, and ballrooms etc. Use our high
quality water-based fog liquid to optimize the performance of Fog Myth series.
FM-800• 700Wheater
• 5minuteheatuptime
• Approx.3500cu.Ft/minoutput
• 0.9literfluidcontainer
• Directthermalprotection
• Operatebylinecontroller
(LC-2S), remote controller (RC-2),
timing controller (TC-2)
FM-1200• 1100Wheater
• Equippedwithlow-fluidsensors,which
will automatically stop pumping once
fluid level is too low.
• 8minuteheatuptime
• Approx.7000cu.Ft/minoutput
• 2.5literfluidcontainer
• Directthermalprotection
• Operatebylinecontroller
(LC-1), remote controller
(RC-1), timing controller(TC-1), or
DMX controller(DMX-2)
FM-1800• 1600Wheater
• Equippedwithlow-fluidsensors,which
will automatically stop pumping once
fluid level is too low.
• 8minuteheatuptime
• Approx.21000cu.Ft/minoutput
• 5literfluidcontainer
• Directthermalprotection
• Operatebylinecontroller
(LC-1), remote controller
(RC-1), timing controller(TC-1), or
DMX controller(DMX-2)
Fog myth series specifications
ITEM NO. FM-800 FM-1200 FM-1800
Color Black or Silver Black or Silver TT
Power 700W 1200W 1700W
Fuse (120V) T10A/250V T12A/250V NFB 20A
Fuse (230V, 240V) T5A/250V T7A/250V NFB 10A
Warm Up Time (min) 5 8 8
Output (cu. ft/min) 3500 7000 21000
Tank (liters) 0.9L 2.5L 5L
Voltage 120V/60Hz,230V/50Hz 120V/60Hz,230V/50Hz 120V/60Hz,230V/50Hz
Dimensions(LxWxH, W/O Bracket) 235x149x136 mm 310x220x161 mm 435x280x295 mm(W/Handle)
Weight (kg) 3.25 6.10 11.6
Matching Controller(Optional) LC-2S,RC-2,TC-2 LC-1,RC-1,TC-1,DMX-2 LC-1,RC-1,TC-1,DMX-2
* Voltage is preset at factory and may not be changed.
Hazer
DMX Super Hazer 400, Haze Effect of High Light-PenerationSelect Super Hazer 400 to make fog effect of high light-penetration.
Super Hazer 400 is able to generate harmless, dry and clean haze of high
light-penetration, which is excellent for matching different kinds of lighting
shows including traditional lightings, LED lightings and lasers, etc.
Super Hazer 400 has equipped inside a professional air compressor, which
is maintenance-free, a precise system of haze transmission, and a liquid
tank of large volume. Super Hazer 400 is designed with two independent
nozzles, which can generate respectively volumes of haze. The haze
generated by a procedure without heating up contributes much better
effect of penetration. The specific gravity of the particle of the haze is
similar to the air, so it can stay in the air longer. This character makes
Super Hazer 400 be an excellent implement for lighting shows. The super
powered compressor of Super Hazer 400 is quiet and highly effective.
It is suitable to be used in any kinds of professional occasions.
Super Hazer 400 is for DMX signal control, permitting use of any DMX
controller. SHZ-1C easy controller is specially designed for Super Hazer 400.
Super Hazer-400 is a perfect master piece characterized by the function
of generating volumes of haze of high light-penetration and high quality
as well as the high stability, low power consumption, high safety and
quietness. It is no doubt at all that Super Hazer 400 is professional at the
top level.
Super Hazer 400 (SHZ-400)
Product specificationPower 420W
Heater power 400W
Fuse (120V) 6A
Fuse (230V, 240V) 3A
Warm up time (min) NO
Fog output (cu.ft/min) 2800
Tank (liters) 2.5
Hanging Bracket YES
Dimensions (LxWxH, W/Handle)
500x341x285 mm
Weight (kg) 16
Voltage 120V,230V, 240V 50/60Hz
DMX Control DMX 1CH
Mach Controller SHZ-1C
* Voltage is preset at factory and may not be changed.
Super Hazer 400 is designed with two independent nozzles, which can generate respectively volumes of haze.
Super Hazer 400 is for DMX signal control, permitting use of any DMX controller. SHZ-1C easy controller is specially designed for Super Hazer 400.
The haze generated by a procedure without heating up contributes much better effect of penetration. The specific gravity of the particle of the haze is similar to the air, so it can stay in the air longer.
Hazer
Product specificationPower 700W
Heater power 650W
Fuse (120V) 10A
Fuse (230V, 240V) 5A
Warm up time (min) 5
Fog output (cu.ft/min) 1500
Tank (liters) 2
Hanging Bracket YES
Dimensions (LxWxH, W/Handle)
493x220x200 mm
Weight (kg) 7.10
Voltage 120V,230V, 240V 50/60Hz
Mach Controller TC-4, DMX-2X
* Voltage is preset at factory and may not be changed.
Super Hazer 80, Haze Maker of High Efficiency–SHZ-80T/80DSuper Hazer 80 is high efficiency of heating. It is compact for easy
movement. It can make volumes of harmless and dry haze that is
perfectly suitable for matching with any kind of traditional lightings,
LED lightings and Lasers in any performance.
Super Hazer 80 is equipped with die-cut heating module, quiet fan
and big liquid tank. The heating module of high efficiency allows Super
Hazer 80 to make volumes of haze in a short time and to disperse
the haze evenly in the whole space. When detected low liquid by
the patented sensor device, power cutting functions automatically to
prevent interior spare parts from damage. The fan is quiet and effective.
The dry and long lasting haze effect makes Super Hazer 80 excellent for
matching with any kinds of lightings. TC-4 timer controller and DMX
signal convertible DMX-2X controller are further options to elevate the
utility of Super Hazer 80.
Super Hazer 80, perfect combination of high qualified haze in volumes,
high stability and safety, high efficiency and quietness, presents its
admirable value as the most wanted hazer.
Super Hazer 80 (SHZ-80T/80D)
When detected low liquid by the patented sensor device, power cutting functions automatically to prevent interior spare parts from damage.
Super Hazer 80 is equipped with die-cut heating module, quiet fan and big liquid tank.
The heating module of high efficiency allows Super Hazer 80 to make volumes of haze in a short time and to disperse the haze evenly in the whole space.
Effect Fog
Stunning Output in VerticalCyclone Fogger of vertical output is born as professional with DMX control.
Its powerful vertical output creates outstanding fog effect. One-piece
jointless die-cast heating pipe elevates heating efficiency and prevents
nozzle jam. Such specially designed heater sealed with iron guarantees
absolute safety to the users even in case all thermo sensor system is out of
work and results high temperature to melt aluminum as liquid, because
the liquid will be absolutely blocked. Powerful fogging with low power
consumption is no doubt an indispensable advantage in this era short of
energy. Patented function of sensing low liquid will automatically force
the pump to stop working, so that prevents parts damage. Strong outer
shell, handle of friendly use and Liquid tank of large volume accomplish
Cyclone Fogger perfect. Wire controller LC-1X, wireless controller RC-1X
and timer TC-1X are optional for operating Cyclone Foggers with excellent
conditions.
Cyclone Foggers can be easily installed in theater and studio. They are also
the most wanted for creating special and attractive effect in large scale
shows, concert, DJ touring and clubs.
Cyclone Fogger (CF-1500)
Product specification
Power 1600W
Heater power 1500W
Fuse (120V) 15A
Fuse (230V, 240V) 8A
Warm up time (min) 6.5
Fog output (cu.ft/min) 25000
Tank (liters) 2
Hanging Bracket YES
Dimensions(LxWxH, W/Handle)
315x250x202 mm
Weight (kg) 7.2
Voltage 120V,230V, 240V 50/60Hz
DMX Control DMX 1CH
Mach Controller LC-1X, RC-1X, TC-1X
* Voltage is preset at factory and may not be changed.
One-piece jointless die-cast heating pipe elevates heating efficiency and prevents nozzle jam.
Such specially designed heater sealed with iron guarantees absolute safety to the users even in case all thermo sensor system is out of work and results high temperature to melt aluminum as liquid, because the liquid will be absolutely blocked.
Bu
bb
le Master
The most wanted Bubble Master makes dancing parties full of fun.
Equipped with Double Bubble Wheel, Bubble Master constantly
produces volumes of firm bubbles. Its big mouth blows strongly
volumes of bubbles to the air, and also recycles the bubble liquid at
the same to avoid liquid leaking. The bottom base of the die-cut plastic
case is completely sealed, so that the liquid will not easy to spill when
the machine is being moving. Easy for bubble liquid supply plus the
handle for direct holding make Bubble Master absolutely user-friendly
in different kinds of locations, celebration parties, dancing parties and
shows.
Bubble Master can work with wire controller and wireless controller.
Without doubt, Bubble Master is the best helper for creating the best
activity atmosphere.
Bubble Master (BB-100)
Product specificationPower consumption 25W
Tank capacity 1
Fluid Consumption Rate 2 hr/liter
Weight 1.88 kg
Dimensions (LxWxH, W/Handle )
352x176x209 mm
Power Input 120V,230V, 240V 50/60Hz
Optional Remotes LC-3, RC-3
Mach Controller LC-3S
* Voltage is preset at factory and may not be changed.
Equipped with Double Bubble Wheel, Bubble Master constantly produces volumes of firm bubbles.
The bottom base of the die-cut plastic case is completely sealed, so that the liquid will not easy to spill when the machine is being moving.
Party Fog
Mobile Party Fog Machine 400W & 800W Small Fog Machine
High Mobility, High Safety, Hiht InnovationThe miniature, lightweight 400W/800W fog machine are new models of thermal conductivity type fog machine specially
designed for commercial market. After passing various stringent environment simulation tests and safety specification
certification, this mobility foggers swept the fog machine market with a fresh new look. Its mechanized production and
strict processing control ensured conformity to quality control that is why 400W/800W fog machines have a very stable
quality. With respect to strong demand for security by the commercial market, the new design of this mobility fog machine
specifically targeted the triple safety protection. Even if there are damages in some parts of the machine, it can still give
the safest protection and provide customers with maximum safety. With puffing flow (output) of around 2000 (400W) and
3500 (800W) cu.ft/min, 400W/800W foggers are very suitable for use in small exhibitions, family parties, mini bars or small
commercial spaces.
Product specifications
Model DEO-400 DEO-400S DEO-800 DEO-800S GT-400 GT-800
Color Black Silver Black Silver Black & Silver Black & Silver
Power 400W 400W 800W 800W 400W 800W
Fuse (120V) 5A 5A 8A 8A 5A 8A
Fuse (230V) 3A 3A 5A 5A 3A 5A
Heating Time (minute) 4.5 4.5 5 5 4.5 5
Output (cu. ft/min) 2000 2000 3500 3500 2000 3500
Tank (liters) 0.6 0.6 0.6 0.6 0.6 0.6
Hanging bracket YES YES YES YES YES YES
Voltage120V,230V, 240V50/60Hz
120V,230V, 240V50/60Hz
120V,230V, 240V50/60Hz
120V,230V, 240V50/60Hz
120V,230V, 240V50/60Hz
120V,230V, 240V50/60Hz
Dimensions((LxWxH, W/Handle)
235 x148x174 mm 235 x148x174 mm 235 x148x174 mm 235 x148x174 mm 243 x148x177 mm 243 x148x177 mm
Weight (kg) 2.2 2.2 2.4 2.4 2.2 2.4
Matching Controller (Included)
LC-2X LC-2X LC-2X LC-2X LC-2X LC-2X
* NOTICE: Voltage is preset at factory and may not be changed.
Features:• Aspecialheatingelementdesignthatpreventsblockage,givingyearsofuse.
• Awide-anglefogoutput,whichuseofjointlessoiltransmissionpipelinesystemminimizesthepossibilityofblockage.
• Aneasy-to-usedesignmadeforconvenientoperationinvarioussettings.
• Mobility,compactandlightweightexterior.
• Itsfullyautomaticmechanicalproductionprovidedstablequality.
• Triplesafetyprotectiongaveconsumersmoresecurity.
• High-performancepumpforgreatfogoutput.
• Candirectlyusefogswitchontheback(optional)oruselinecontrollerLC-2X.
Fog
Mach
ine C
on
troller
Fog
Mach
ine C
on
troller
Fog
Liqu
id
Product specifications
www.amita.com.tw
• We are continuously improving and upgrading our products so specifications aresubject to change without notice.
©2011 JyunYao Technology Co., Ltd. 05032011
Local Dealer: