PRELIMINARY
for internal use onlyAMP SUPERSEAL 15 Series Connectorsfor the Automotive Industry
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE II TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
INNOVATIVETECHNOLOGIESTE Connectivity (TE) is a leader in automotive connectivity and sensor technology Our engineers are
always working to meet complex requirements We connect nearly every electronic function in the
vehicle ndash from alternative power systems to infotainment and sensor technologies Our technologies
withstand harsh environments and tolerate high temperature vibration shock pressure and long-life
in electronic control systems
Our electrical and electronic interconnection products and solutions are
used to electrically and mechanically connect wires and cables printed
circuit boards integrated circuit packages batteries and more
INTERCONNECTION SYSTEMS
TE is your partner for vehicle-specific cable assemblies We offer research
and development capabilities prototypes and samples as well as
manufacturing facilities
CABLE ASSEMBLIES
Our technologies leverage decades of innovation and experience with
high-voltage transmission and distribution Our hybrid and electric mobility
solutions include a complete line of connectors terminals sensors
cable assemblies contactors and battery connection protection to help
safeguard the flow of power in hybrid and electric vehicles Connection
after connection you can count on TE for smaller greener lighter and
smarter solutions you can trust
HYBRID amp ELECTRIC MOBILITY SOLUTIONS
PAGE IIITE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Data is critical for making vehicles safer greener smarter and more
connected Customers rely on our sensor technology to provide data for
control adaptation and response of vehicle functions and features that
increase safety comfort efficiency and more We collaborate to provide
solutions for demanding and harsh applications such as automated
transmissions engines chassis clutch brake and exhaust Our products
can be found in vehicles traveling the worldrsquos roads and highways
SENSOR SOLUTIONS
From passenger comfort and infotainment to higher DC voltages and
power levels to harsh environments our relays and contactors provide
critical switching functions in multiple vehicle applications With increased
contact gaps and other key design features our relays are ideal for harsh
environments such as shock and vibration
RELAYS
Our wide range of infotainment solutions are ideal for consumer port
connections high data rate applications next-generation harness
architecture board-to-board connections and vehicle-to-vehicle
communication
INFOTAINMENT
Catalog 1654292-2Revised 06-2016
PAGE IV TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
IP CodeElements and Significance acc to IEC 60529 and DIN 40050
Catalog 1654292-2Revised 06-2016
PAGE VTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
IP CodeElements and Significance acc to IEC 60529 and DIN 40050
Catalog 1654292-2Revised 06-2016
PAGE VI TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIITE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIII TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
At TE Connectivity we support your RoHS requirements Wersquove assessed more than 15 million end
itemscomponents for RoHS compliance and issued new part numbers where any change was
required to eliminate the restricted materials Part numbers in this catalog are identified as
RoHS Compliant Part numbers in this catalog are RoHS Compliant unless marked otherwise These products comply
with European Union Directive 200295EC as amended 1 January 2006 that restricts the use of
lead mercury cadmium hexavalent chromium PBB and PBDE in certain electrical and electronic
products sold into the EU as of 1 July 2006
Note For purposes of this Catalog included within the definition of RoHS Compliant are products
that are clearly ldquoOut of Scoperdquo of the RoHS Directive such as hand tools and other non-electrical
accessories
Non-RoHS Compliant These part numbers are identified with a ldquotrdquo symbol These products do not comply with the material
restrictions of the European Union Directive 200295EC
5 of 6 Compliant A ldquolrdquo symbol identifies these part numbers These products do not fully comply with the European
Union Directive 200295EC because they contain lead in solderable interfaces (they do not contain
any of the other five restricted substances above allowable limits) However these
products may be suitable for use in RoHS applications where there is an application-based
exception for lead in solders such as the server storage or networking infrastructure exemption
Note Information regarding RoHS compliance is provided based on reasonable inquiry of our
suppliers and represents our current actual knowledge based on the information provided by our
suppliers This information is subject to change For latest compliance status refer to our website
referenced below So whatever your questions when it comes to RoHS wersquove got the answers at
httpwwwTEcomcustomersupportrohssupportcenter
Getting the information you need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your
questions and support your RoHS needs A RoHS FAQ (Frequently Asked Questions) is available
with links to more detailed information You can also submit RoHS questions and receive a
response within 24 hours during a normal work week The Support Center also provides
bull Cross-Reference from Non-compliant to Compliant Products
bull Ability to browse RoHS Compliant Products in our on-line catalog
wwwTEcomcommercealtRohsAltHomedo
bull Downloadable Technical Data Customer Information Presentation
bull More detailed information regarding the definitions used above
RoHS Ready Restriction on the Use of Hazardous Substances (RoHS)
Catalog 1654292-2Revised 06-2016
PAGE IXTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
RemarkenspStarting from 003 mm2 (AWG 32) a wire can be crimped
AWG Code Diameter (Inch) Diameter (mm) F (mm2)
000000 05800 14733 1700 00000 05165 13130 1350 0000 04600 11684 1038 000 04096 10400 0790 00 03648 9270 0675 0 03249 825 0534 1 02893 734 0422 2 02576 655 337 3 02294 582 266 4 02043 518 210 5 01819 462 169 6 01620 04115 1325 7 01443 366 1025 8 01285 326 834 9 01144 290 66 10 01019 259 527 11 00907 230 415 12 00808 205 33 13 00720 183 263 14 00641 163 208 15 00571 145 165 16 00508 129 1305 17 00453 114 101 18 00403 102 079 19 00359 091 065 20 00320 081 051 21 00285 072 0407 22 00253 064 032 23 00226 0057 0255 24 00201 0051 0205 25 00179 00455 0162 26 00159 00400 0125 27 00142 00360 0102 28 00126 00320 008 29 00113 00287 00646 30 00100 00254 00516 31 00089 00226 004 32 00080 00203 00324 33 00071 00180 00255 34 00063 00160 002 35 00056 00142 00158 36 00050 00127 00127 37 00045 00114 001 38 00040 00101 0008 39 00035 00089 00062 40 00031 00079 00049 41 00028 00071 000395 42 00025 00064 000321 43 00022 00056 000246 44 000198 00050 000196 45 000176 00045 46 000157 00040 47 000140 00036 48 000124 00031 49 000110 00028 50 000099 00025
Conversion TablesAWG Conversion Table (Average Value)
Catalog 1654292-2Revised 06-2016
PAGE X TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Table of ContentsTable of Contents
AMP SUPERSEAL 15Series Connectors
Page
Powe
rtrain
Syste
ms
Safe
ty amp
Secu
rity
Syste
ms
Conv
enien
ce
Drive
r
Info
rmat
ion
Body
amp Ch
assis
Syste
ms
AMP SUPERSEAL 15 Series Connectors
Introduction 1
15 mm Receptacle Contacts 2 l l l l l
15 mm Tab Contacts 3 l l l l l
Single Wire Seals and Cavity Plug 4 l l l l l
Plug Housings 1 ndash 6 Positions 5 l l l l l
Cap Housings 1 ndash 6 Positions 6 l l l l l
Rubber Boots 7 l l l l l
Application Tooling 9
Numerical Index 10
TE Connectivity online 12
Global Contacts 13
Imprint 13
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE II TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
INNOVATIVETECHNOLOGIESTE Connectivity (TE) is a leader in automotive connectivity and sensor technology Our engineers are
always working to meet complex requirements We connect nearly every electronic function in the
vehicle ndash from alternative power systems to infotainment and sensor technologies Our technologies
withstand harsh environments and tolerate high temperature vibration shock pressure and long-life
in electronic control systems
Our electrical and electronic interconnection products and solutions are
used to electrically and mechanically connect wires and cables printed
circuit boards integrated circuit packages batteries and more
INTERCONNECTION SYSTEMS
TE is your partner for vehicle-specific cable assemblies We offer research
and development capabilities prototypes and samples as well as
manufacturing facilities
CABLE ASSEMBLIES
Our technologies leverage decades of innovation and experience with
high-voltage transmission and distribution Our hybrid and electric mobility
solutions include a complete line of connectors terminals sensors
cable assemblies contactors and battery connection protection to help
safeguard the flow of power in hybrid and electric vehicles Connection
after connection you can count on TE for smaller greener lighter and
smarter solutions you can trust
HYBRID amp ELECTRIC MOBILITY SOLUTIONS
PAGE IIITE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Data is critical for making vehicles safer greener smarter and more
connected Customers rely on our sensor technology to provide data for
control adaptation and response of vehicle functions and features that
increase safety comfort efficiency and more We collaborate to provide
solutions for demanding and harsh applications such as automated
transmissions engines chassis clutch brake and exhaust Our products
can be found in vehicles traveling the worldrsquos roads and highways
SENSOR SOLUTIONS
From passenger comfort and infotainment to higher DC voltages and
power levels to harsh environments our relays and contactors provide
critical switching functions in multiple vehicle applications With increased
contact gaps and other key design features our relays are ideal for harsh
environments such as shock and vibration
RELAYS
Our wide range of infotainment solutions are ideal for consumer port
connections high data rate applications next-generation harness
architecture board-to-board connections and vehicle-to-vehicle
communication
INFOTAINMENT
Catalog 1654292-2Revised 06-2016
PAGE IV TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
IP CodeElements and Significance acc to IEC 60529 and DIN 40050
Catalog 1654292-2Revised 06-2016
PAGE VTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
IP CodeElements and Significance acc to IEC 60529 and DIN 40050
Catalog 1654292-2Revised 06-2016
PAGE VI TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIITE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIII TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
At TE Connectivity we support your RoHS requirements Wersquove assessed more than 15 million end
itemscomponents for RoHS compliance and issued new part numbers where any change was
required to eliminate the restricted materials Part numbers in this catalog are identified as
RoHS Compliant Part numbers in this catalog are RoHS Compliant unless marked otherwise These products comply
with European Union Directive 200295EC as amended 1 January 2006 that restricts the use of
lead mercury cadmium hexavalent chromium PBB and PBDE in certain electrical and electronic
products sold into the EU as of 1 July 2006
Note For purposes of this Catalog included within the definition of RoHS Compliant are products
that are clearly ldquoOut of Scoperdquo of the RoHS Directive such as hand tools and other non-electrical
accessories
Non-RoHS Compliant These part numbers are identified with a ldquotrdquo symbol These products do not comply with the material
restrictions of the European Union Directive 200295EC
5 of 6 Compliant A ldquolrdquo symbol identifies these part numbers These products do not fully comply with the European
Union Directive 200295EC because they contain lead in solderable interfaces (they do not contain
any of the other five restricted substances above allowable limits) However these
products may be suitable for use in RoHS applications where there is an application-based
exception for lead in solders such as the server storage or networking infrastructure exemption
Note Information regarding RoHS compliance is provided based on reasonable inquiry of our
suppliers and represents our current actual knowledge based on the information provided by our
suppliers This information is subject to change For latest compliance status refer to our website
referenced below So whatever your questions when it comes to RoHS wersquove got the answers at
httpwwwTEcomcustomersupportrohssupportcenter
Getting the information you need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your
questions and support your RoHS needs A RoHS FAQ (Frequently Asked Questions) is available
with links to more detailed information You can also submit RoHS questions and receive a
response within 24 hours during a normal work week The Support Center also provides
bull Cross-Reference from Non-compliant to Compliant Products
bull Ability to browse RoHS Compliant Products in our on-line catalog
wwwTEcomcommercealtRohsAltHomedo
bull Downloadable Technical Data Customer Information Presentation
bull More detailed information regarding the definitions used above
RoHS Ready Restriction on the Use of Hazardous Substances (RoHS)
Catalog 1654292-2Revised 06-2016
PAGE IXTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
RemarkenspStarting from 003 mm2 (AWG 32) a wire can be crimped
AWG Code Diameter (Inch) Diameter (mm) F (mm2)
000000 05800 14733 1700 00000 05165 13130 1350 0000 04600 11684 1038 000 04096 10400 0790 00 03648 9270 0675 0 03249 825 0534 1 02893 734 0422 2 02576 655 337 3 02294 582 266 4 02043 518 210 5 01819 462 169 6 01620 04115 1325 7 01443 366 1025 8 01285 326 834 9 01144 290 66 10 01019 259 527 11 00907 230 415 12 00808 205 33 13 00720 183 263 14 00641 163 208 15 00571 145 165 16 00508 129 1305 17 00453 114 101 18 00403 102 079 19 00359 091 065 20 00320 081 051 21 00285 072 0407 22 00253 064 032 23 00226 0057 0255 24 00201 0051 0205 25 00179 00455 0162 26 00159 00400 0125 27 00142 00360 0102 28 00126 00320 008 29 00113 00287 00646 30 00100 00254 00516 31 00089 00226 004 32 00080 00203 00324 33 00071 00180 00255 34 00063 00160 002 35 00056 00142 00158 36 00050 00127 00127 37 00045 00114 001 38 00040 00101 0008 39 00035 00089 00062 40 00031 00079 00049 41 00028 00071 000395 42 00025 00064 000321 43 00022 00056 000246 44 000198 00050 000196 45 000176 00045 46 000157 00040 47 000140 00036 48 000124 00031 49 000110 00028 50 000099 00025
Conversion TablesAWG Conversion Table (Average Value)
Catalog 1654292-2Revised 06-2016
PAGE X TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Table of ContentsTable of Contents
AMP SUPERSEAL 15Series Connectors
Page
Powe
rtrain
Syste
ms
Safe
ty amp
Secu
rity
Syste
ms
Conv
enien
ce
Drive
r
Info
rmat
ion
Body
amp Ch
assis
Syste
ms
AMP SUPERSEAL 15 Series Connectors
Introduction 1
15 mm Receptacle Contacts 2 l l l l l
15 mm Tab Contacts 3 l l l l l
Single Wire Seals and Cavity Plug 4 l l l l l
Plug Housings 1 ndash 6 Positions 5 l l l l l
Cap Housings 1 ndash 6 Positions 6 l l l l l
Rubber Boots 7 l l l l l
Application Tooling 9
Numerical Index 10
TE Connectivity online 12
Global Contacts 13
Imprint 13
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE IIITE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Data is critical for making vehicles safer greener smarter and more
connected Customers rely on our sensor technology to provide data for
control adaptation and response of vehicle functions and features that
increase safety comfort efficiency and more We collaborate to provide
solutions for demanding and harsh applications such as automated
transmissions engines chassis clutch brake and exhaust Our products
can be found in vehicles traveling the worldrsquos roads and highways
SENSOR SOLUTIONS
From passenger comfort and infotainment to higher DC voltages and
power levels to harsh environments our relays and contactors provide
critical switching functions in multiple vehicle applications With increased
contact gaps and other key design features our relays are ideal for harsh
environments such as shock and vibration
RELAYS
Our wide range of infotainment solutions are ideal for consumer port
connections high data rate applications next-generation harness
architecture board-to-board connections and vehicle-to-vehicle
communication
INFOTAINMENT
Catalog 1654292-2Revised 06-2016
PAGE IV TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
IP CodeElements and Significance acc to IEC 60529 and DIN 40050
Catalog 1654292-2Revised 06-2016
PAGE VTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
IP CodeElements and Significance acc to IEC 60529 and DIN 40050
Catalog 1654292-2Revised 06-2016
PAGE VI TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIITE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIII TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
At TE Connectivity we support your RoHS requirements Wersquove assessed more than 15 million end
itemscomponents for RoHS compliance and issued new part numbers where any change was
required to eliminate the restricted materials Part numbers in this catalog are identified as
RoHS Compliant Part numbers in this catalog are RoHS Compliant unless marked otherwise These products comply
with European Union Directive 200295EC as amended 1 January 2006 that restricts the use of
lead mercury cadmium hexavalent chromium PBB and PBDE in certain electrical and electronic
products sold into the EU as of 1 July 2006
Note For purposes of this Catalog included within the definition of RoHS Compliant are products
that are clearly ldquoOut of Scoperdquo of the RoHS Directive such as hand tools and other non-electrical
accessories
Non-RoHS Compliant These part numbers are identified with a ldquotrdquo symbol These products do not comply with the material
restrictions of the European Union Directive 200295EC
5 of 6 Compliant A ldquolrdquo symbol identifies these part numbers These products do not fully comply with the European
Union Directive 200295EC because they contain lead in solderable interfaces (they do not contain
any of the other five restricted substances above allowable limits) However these
products may be suitable for use in RoHS applications where there is an application-based
exception for lead in solders such as the server storage or networking infrastructure exemption
Note Information regarding RoHS compliance is provided based on reasonable inquiry of our
suppliers and represents our current actual knowledge based on the information provided by our
suppliers This information is subject to change For latest compliance status refer to our website
referenced below So whatever your questions when it comes to RoHS wersquove got the answers at
httpwwwTEcomcustomersupportrohssupportcenter
Getting the information you need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your
questions and support your RoHS needs A RoHS FAQ (Frequently Asked Questions) is available
with links to more detailed information You can also submit RoHS questions and receive a
response within 24 hours during a normal work week The Support Center also provides
bull Cross-Reference from Non-compliant to Compliant Products
bull Ability to browse RoHS Compliant Products in our on-line catalog
wwwTEcomcommercealtRohsAltHomedo
bull Downloadable Technical Data Customer Information Presentation
bull More detailed information regarding the definitions used above
RoHS Ready Restriction on the Use of Hazardous Substances (RoHS)
Catalog 1654292-2Revised 06-2016
PAGE IXTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
RemarkenspStarting from 003 mm2 (AWG 32) a wire can be crimped
AWG Code Diameter (Inch) Diameter (mm) F (mm2)
000000 05800 14733 1700 00000 05165 13130 1350 0000 04600 11684 1038 000 04096 10400 0790 00 03648 9270 0675 0 03249 825 0534 1 02893 734 0422 2 02576 655 337 3 02294 582 266 4 02043 518 210 5 01819 462 169 6 01620 04115 1325 7 01443 366 1025 8 01285 326 834 9 01144 290 66 10 01019 259 527 11 00907 230 415 12 00808 205 33 13 00720 183 263 14 00641 163 208 15 00571 145 165 16 00508 129 1305 17 00453 114 101 18 00403 102 079 19 00359 091 065 20 00320 081 051 21 00285 072 0407 22 00253 064 032 23 00226 0057 0255 24 00201 0051 0205 25 00179 00455 0162 26 00159 00400 0125 27 00142 00360 0102 28 00126 00320 008 29 00113 00287 00646 30 00100 00254 00516 31 00089 00226 004 32 00080 00203 00324 33 00071 00180 00255 34 00063 00160 002 35 00056 00142 00158 36 00050 00127 00127 37 00045 00114 001 38 00040 00101 0008 39 00035 00089 00062 40 00031 00079 00049 41 00028 00071 000395 42 00025 00064 000321 43 00022 00056 000246 44 000198 00050 000196 45 000176 00045 46 000157 00040 47 000140 00036 48 000124 00031 49 000110 00028 50 000099 00025
Conversion TablesAWG Conversion Table (Average Value)
Catalog 1654292-2Revised 06-2016
PAGE X TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Table of ContentsTable of Contents
AMP SUPERSEAL 15Series Connectors
Page
Powe
rtrain
Syste
ms
Safe
ty amp
Secu
rity
Syste
ms
Conv
enien
ce
Drive
r
Info
rmat
ion
Body
amp Ch
assis
Syste
ms
AMP SUPERSEAL 15 Series Connectors
Introduction 1
15 mm Receptacle Contacts 2 l l l l l
15 mm Tab Contacts 3 l l l l l
Single Wire Seals and Cavity Plug 4 l l l l l
Plug Housings 1 ndash 6 Positions 5 l l l l l
Cap Housings 1 ndash 6 Positions 6 l l l l l
Rubber Boots 7 l l l l l
Application Tooling 9
Numerical Index 10
TE Connectivity online 12
Global Contacts 13
Imprint 13
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016
PAGE IV TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
IP CodeElements and Significance acc to IEC 60529 and DIN 40050
Catalog 1654292-2Revised 06-2016
PAGE VTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
IP CodeElements and Significance acc to IEC 60529 and DIN 40050
Catalog 1654292-2Revised 06-2016
PAGE VI TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIITE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIII TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
At TE Connectivity we support your RoHS requirements Wersquove assessed more than 15 million end
itemscomponents for RoHS compliance and issued new part numbers where any change was
required to eliminate the restricted materials Part numbers in this catalog are identified as
RoHS Compliant Part numbers in this catalog are RoHS Compliant unless marked otherwise These products comply
with European Union Directive 200295EC as amended 1 January 2006 that restricts the use of
lead mercury cadmium hexavalent chromium PBB and PBDE in certain electrical and electronic
products sold into the EU as of 1 July 2006
Note For purposes of this Catalog included within the definition of RoHS Compliant are products
that are clearly ldquoOut of Scoperdquo of the RoHS Directive such as hand tools and other non-electrical
accessories
Non-RoHS Compliant These part numbers are identified with a ldquotrdquo symbol These products do not comply with the material
restrictions of the European Union Directive 200295EC
5 of 6 Compliant A ldquolrdquo symbol identifies these part numbers These products do not fully comply with the European
Union Directive 200295EC because they contain lead in solderable interfaces (they do not contain
any of the other five restricted substances above allowable limits) However these
products may be suitable for use in RoHS applications where there is an application-based
exception for lead in solders such as the server storage or networking infrastructure exemption
Note Information regarding RoHS compliance is provided based on reasonable inquiry of our
suppliers and represents our current actual knowledge based on the information provided by our
suppliers This information is subject to change For latest compliance status refer to our website
referenced below So whatever your questions when it comes to RoHS wersquove got the answers at
httpwwwTEcomcustomersupportrohssupportcenter
Getting the information you need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your
questions and support your RoHS needs A RoHS FAQ (Frequently Asked Questions) is available
with links to more detailed information You can also submit RoHS questions and receive a
response within 24 hours during a normal work week The Support Center also provides
bull Cross-Reference from Non-compliant to Compliant Products
bull Ability to browse RoHS Compliant Products in our on-line catalog
wwwTEcomcommercealtRohsAltHomedo
bull Downloadable Technical Data Customer Information Presentation
bull More detailed information regarding the definitions used above
RoHS Ready Restriction on the Use of Hazardous Substances (RoHS)
Catalog 1654292-2Revised 06-2016
PAGE IXTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
RemarkenspStarting from 003 mm2 (AWG 32) a wire can be crimped
AWG Code Diameter (Inch) Diameter (mm) F (mm2)
000000 05800 14733 1700 00000 05165 13130 1350 0000 04600 11684 1038 000 04096 10400 0790 00 03648 9270 0675 0 03249 825 0534 1 02893 734 0422 2 02576 655 337 3 02294 582 266 4 02043 518 210 5 01819 462 169 6 01620 04115 1325 7 01443 366 1025 8 01285 326 834 9 01144 290 66 10 01019 259 527 11 00907 230 415 12 00808 205 33 13 00720 183 263 14 00641 163 208 15 00571 145 165 16 00508 129 1305 17 00453 114 101 18 00403 102 079 19 00359 091 065 20 00320 081 051 21 00285 072 0407 22 00253 064 032 23 00226 0057 0255 24 00201 0051 0205 25 00179 00455 0162 26 00159 00400 0125 27 00142 00360 0102 28 00126 00320 008 29 00113 00287 00646 30 00100 00254 00516 31 00089 00226 004 32 00080 00203 00324 33 00071 00180 00255 34 00063 00160 002 35 00056 00142 00158 36 00050 00127 00127 37 00045 00114 001 38 00040 00101 0008 39 00035 00089 00062 40 00031 00079 00049 41 00028 00071 000395 42 00025 00064 000321 43 00022 00056 000246 44 000198 00050 000196 45 000176 00045 46 000157 00040 47 000140 00036 48 000124 00031 49 000110 00028 50 000099 00025
Conversion TablesAWG Conversion Table (Average Value)
Catalog 1654292-2Revised 06-2016
PAGE X TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Table of ContentsTable of Contents
AMP SUPERSEAL 15Series Connectors
Page
Powe
rtrain
Syste
ms
Safe
ty amp
Secu
rity
Syste
ms
Conv
enien
ce
Drive
r
Info
rmat
ion
Body
amp Ch
assis
Syste
ms
AMP SUPERSEAL 15 Series Connectors
Introduction 1
15 mm Receptacle Contacts 2 l l l l l
15 mm Tab Contacts 3 l l l l l
Single Wire Seals and Cavity Plug 4 l l l l l
Plug Housings 1 ndash 6 Positions 5 l l l l l
Cap Housings 1 ndash 6 Positions 6 l l l l l
Rubber Boots 7 l l l l l
Application Tooling 9
Numerical Index 10
TE Connectivity online 12
Global Contacts 13
Imprint 13
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016
PAGE VTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
IP CodeElements and Significance acc to IEC 60529 and DIN 40050
Catalog 1654292-2Revised 06-2016
PAGE VI TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIITE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIII TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
At TE Connectivity we support your RoHS requirements Wersquove assessed more than 15 million end
itemscomponents for RoHS compliance and issued new part numbers where any change was
required to eliminate the restricted materials Part numbers in this catalog are identified as
RoHS Compliant Part numbers in this catalog are RoHS Compliant unless marked otherwise These products comply
with European Union Directive 200295EC as amended 1 January 2006 that restricts the use of
lead mercury cadmium hexavalent chromium PBB and PBDE in certain electrical and electronic
products sold into the EU as of 1 July 2006
Note For purposes of this Catalog included within the definition of RoHS Compliant are products
that are clearly ldquoOut of Scoperdquo of the RoHS Directive such as hand tools and other non-electrical
accessories
Non-RoHS Compliant These part numbers are identified with a ldquotrdquo symbol These products do not comply with the material
restrictions of the European Union Directive 200295EC
5 of 6 Compliant A ldquolrdquo symbol identifies these part numbers These products do not fully comply with the European
Union Directive 200295EC because they contain lead in solderable interfaces (they do not contain
any of the other five restricted substances above allowable limits) However these
products may be suitable for use in RoHS applications where there is an application-based
exception for lead in solders such as the server storage or networking infrastructure exemption
Note Information regarding RoHS compliance is provided based on reasonable inquiry of our
suppliers and represents our current actual knowledge based on the information provided by our
suppliers This information is subject to change For latest compliance status refer to our website
referenced below So whatever your questions when it comes to RoHS wersquove got the answers at
httpwwwTEcomcustomersupportrohssupportcenter
Getting the information you need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your
questions and support your RoHS needs A RoHS FAQ (Frequently Asked Questions) is available
with links to more detailed information You can also submit RoHS questions and receive a
response within 24 hours during a normal work week The Support Center also provides
bull Cross-Reference from Non-compliant to Compliant Products
bull Ability to browse RoHS Compliant Products in our on-line catalog
wwwTEcomcommercealtRohsAltHomedo
bull Downloadable Technical Data Customer Information Presentation
bull More detailed information regarding the definitions used above
RoHS Ready Restriction on the Use of Hazardous Substances (RoHS)
Catalog 1654292-2Revised 06-2016
PAGE IXTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
RemarkenspStarting from 003 mm2 (AWG 32) a wire can be crimped
AWG Code Diameter (Inch) Diameter (mm) F (mm2)
000000 05800 14733 1700 00000 05165 13130 1350 0000 04600 11684 1038 000 04096 10400 0790 00 03648 9270 0675 0 03249 825 0534 1 02893 734 0422 2 02576 655 337 3 02294 582 266 4 02043 518 210 5 01819 462 169 6 01620 04115 1325 7 01443 366 1025 8 01285 326 834 9 01144 290 66 10 01019 259 527 11 00907 230 415 12 00808 205 33 13 00720 183 263 14 00641 163 208 15 00571 145 165 16 00508 129 1305 17 00453 114 101 18 00403 102 079 19 00359 091 065 20 00320 081 051 21 00285 072 0407 22 00253 064 032 23 00226 0057 0255 24 00201 0051 0205 25 00179 00455 0162 26 00159 00400 0125 27 00142 00360 0102 28 00126 00320 008 29 00113 00287 00646 30 00100 00254 00516 31 00089 00226 004 32 00080 00203 00324 33 00071 00180 00255 34 00063 00160 002 35 00056 00142 00158 36 00050 00127 00127 37 00045 00114 001 38 00040 00101 0008 39 00035 00089 00062 40 00031 00079 00049 41 00028 00071 000395 42 00025 00064 000321 43 00022 00056 000246 44 000198 00050 000196 45 000176 00045 46 000157 00040 47 000140 00036 48 000124 00031 49 000110 00028 50 000099 00025
Conversion TablesAWG Conversion Table (Average Value)
Catalog 1654292-2Revised 06-2016
PAGE X TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Table of ContentsTable of Contents
AMP SUPERSEAL 15Series Connectors
Page
Powe
rtrain
Syste
ms
Safe
ty amp
Secu
rity
Syste
ms
Conv
enien
ce
Drive
r
Info
rmat
ion
Body
amp Ch
assis
Syste
ms
AMP SUPERSEAL 15 Series Connectors
Introduction 1
15 mm Receptacle Contacts 2 l l l l l
15 mm Tab Contacts 3 l l l l l
Single Wire Seals and Cavity Plug 4 l l l l l
Plug Housings 1 ndash 6 Positions 5 l l l l l
Cap Housings 1 ndash 6 Positions 6 l l l l l
Rubber Boots 7 l l l l l
Application Tooling 9
Numerical Index 10
TE Connectivity online 12
Global Contacts 13
Imprint 13
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016
PAGE VI TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIITE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIII TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
At TE Connectivity we support your RoHS requirements Wersquove assessed more than 15 million end
itemscomponents for RoHS compliance and issued new part numbers where any change was
required to eliminate the restricted materials Part numbers in this catalog are identified as
RoHS Compliant Part numbers in this catalog are RoHS Compliant unless marked otherwise These products comply
with European Union Directive 200295EC as amended 1 January 2006 that restricts the use of
lead mercury cadmium hexavalent chromium PBB and PBDE in certain electrical and electronic
products sold into the EU as of 1 July 2006
Note For purposes of this Catalog included within the definition of RoHS Compliant are products
that are clearly ldquoOut of Scoperdquo of the RoHS Directive such as hand tools and other non-electrical
accessories
Non-RoHS Compliant These part numbers are identified with a ldquotrdquo symbol These products do not comply with the material
restrictions of the European Union Directive 200295EC
5 of 6 Compliant A ldquolrdquo symbol identifies these part numbers These products do not fully comply with the European
Union Directive 200295EC because they contain lead in solderable interfaces (they do not contain
any of the other five restricted substances above allowable limits) However these
products may be suitable for use in RoHS applications where there is an application-based
exception for lead in solders such as the server storage or networking infrastructure exemption
Note Information regarding RoHS compliance is provided based on reasonable inquiry of our
suppliers and represents our current actual knowledge based on the information provided by our
suppliers This information is subject to change For latest compliance status refer to our website
referenced below So whatever your questions when it comes to RoHS wersquove got the answers at
httpwwwTEcomcustomersupportrohssupportcenter
Getting the information you need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your
questions and support your RoHS needs A RoHS FAQ (Frequently Asked Questions) is available
with links to more detailed information You can also submit RoHS questions and receive a
response within 24 hours during a normal work week The Support Center also provides
bull Cross-Reference from Non-compliant to Compliant Products
bull Ability to browse RoHS Compliant Products in our on-line catalog
wwwTEcomcommercealtRohsAltHomedo
bull Downloadable Technical Data Customer Information Presentation
bull More detailed information regarding the definitions used above
RoHS Ready Restriction on the Use of Hazardous Substances (RoHS)
Catalog 1654292-2Revised 06-2016
PAGE IXTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
RemarkenspStarting from 003 mm2 (AWG 32) a wire can be crimped
AWG Code Diameter (Inch) Diameter (mm) F (mm2)
000000 05800 14733 1700 00000 05165 13130 1350 0000 04600 11684 1038 000 04096 10400 0790 00 03648 9270 0675 0 03249 825 0534 1 02893 734 0422 2 02576 655 337 3 02294 582 266 4 02043 518 210 5 01819 462 169 6 01620 04115 1325 7 01443 366 1025 8 01285 326 834 9 01144 290 66 10 01019 259 527 11 00907 230 415 12 00808 205 33 13 00720 183 263 14 00641 163 208 15 00571 145 165 16 00508 129 1305 17 00453 114 101 18 00403 102 079 19 00359 091 065 20 00320 081 051 21 00285 072 0407 22 00253 064 032 23 00226 0057 0255 24 00201 0051 0205 25 00179 00455 0162 26 00159 00400 0125 27 00142 00360 0102 28 00126 00320 008 29 00113 00287 00646 30 00100 00254 00516 31 00089 00226 004 32 00080 00203 00324 33 00071 00180 00255 34 00063 00160 002 35 00056 00142 00158 36 00050 00127 00127 37 00045 00114 001 38 00040 00101 0008 39 00035 00089 00062 40 00031 00079 00049 41 00028 00071 000395 42 00025 00064 000321 43 00022 00056 000246 44 000198 00050 000196 45 000176 00045 46 000157 00040 47 000140 00036 48 000124 00031 49 000110 00028 50 000099 00025
Conversion TablesAWG Conversion Table (Average Value)
Catalog 1654292-2Revised 06-2016
PAGE X TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Table of ContentsTable of Contents
AMP SUPERSEAL 15Series Connectors
Page
Powe
rtrain
Syste
ms
Safe
ty amp
Secu
rity
Syste
ms
Conv
enien
ce
Drive
r
Info
rmat
ion
Body
amp Ch
assis
Syste
ms
AMP SUPERSEAL 15 Series Connectors
Introduction 1
15 mm Receptacle Contacts 2 l l l l l
15 mm Tab Contacts 3 l l l l l
Single Wire Seals and Cavity Plug 4 l l l l l
Plug Housings 1 ndash 6 Positions 5 l l l l l
Cap Housings 1 ndash 6 Positions 6 l l l l l
Rubber Boots 7 l l l l l
Application Tooling 9
Numerical Index 10
TE Connectivity online 12
Global Contacts 13
Imprint 13
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016
PAGE VIITE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Quality Guidelines
Catalog 1654292-2Revised 06-2016
PAGE VIII TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
At TE Connectivity we support your RoHS requirements Wersquove assessed more than 15 million end
itemscomponents for RoHS compliance and issued new part numbers where any change was
required to eliminate the restricted materials Part numbers in this catalog are identified as
RoHS Compliant Part numbers in this catalog are RoHS Compliant unless marked otherwise These products comply
with European Union Directive 200295EC as amended 1 January 2006 that restricts the use of
lead mercury cadmium hexavalent chromium PBB and PBDE in certain electrical and electronic
products sold into the EU as of 1 July 2006
Note For purposes of this Catalog included within the definition of RoHS Compliant are products
that are clearly ldquoOut of Scoperdquo of the RoHS Directive such as hand tools and other non-electrical
accessories
Non-RoHS Compliant These part numbers are identified with a ldquotrdquo symbol These products do not comply with the material
restrictions of the European Union Directive 200295EC
5 of 6 Compliant A ldquolrdquo symbol identifies these part numbers These products do not fully comply with the European
Union Directive 200295EC because they contain lead in solderable interfaces (they do not contain
any of the other five restricted substances above allowable limits) However these
products may be suitable for use in RoHS applications where there is an application-based
exception for lead in solders such as the server storage or networking infrastructure exemption
Note Information regarding RoHS compliance is provided based on reasonable inquiry of our
suppliers and represents our current actual knowledge based on the information provided by our
suppliers This information is subject to change For latest compliance status refer to our website
referenced below So whatever your questions when it comes to RoHS wersquove got the answers at
httpwwwTEcomcustomersupportrohssupportcenter
Getting the information you need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your
questions and support your RoHS needs A RoHS FAQ (Frequently Asked Questions) is available
with links to more detailed information You can also submit RoHS questions and receive a
response within 24 hours during a normal work week The Support Center also provides
bull Cross-Reference from Non-compliant to Compliant Products
bull Ability to browse RoHS Compliant Products in our on-line catalog
wwwTEcomcommercealtRohsAltHomedo
bull Downloadable Technical Data Customer Information Presentation
bull More detailed information regarding the definitions used above
RoHS Ready Restriction on the Use of Hazardous Substances (RoHS)
Catalog 1654292-2Revised 06-2016
PAGE IXTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
RemarkenspStarting from 003 mm2 (AWG 32) a wire can be crimped
AWG Code Diameter (Inch) Diameter (mm) F (mm2)
000000 05800 14733 1700 00000 05165 13130 1350 0000 04600 11684 1038 000 04096 10400 0790 00 03648 9270 0675 0 03249 825 0534 1 02893 734 0422 2 02576 655 337 3 02294 582 266 4 02043 518 210 5 01819 462 169 6 01620 04115 1325 7 01443 366 1025 8 01285 326 834 9 01144 290 66 10 01019 259 527 11 00907 230 415 12 00808 205 33 13 00720 183 263 14 00641 163 208 15 00571 145 165 16 00508 129 1305 17 00453 114 101 18 00403 102 079 19 00359 091 065 20 00320 081 051 21 00285 072 0407 22 00253 064 032 23 00226 0057 0255 24 00201 0051 0205 25 00179 00455 0162 26 00159 00400 0125 27 00142 00360 0102 28 00126 00320 008 29 00113 00287 00646 30 00100 00254 00516 31 00089 00226 004 32 00080 00203 00324 33 00071 00180 00255 34 00063 00160 002 35 00056 00142 00158 36 00050 00127 00127 37 00045 00114 001 38 00040 00101 0008 39 00035 00089 00062 40 00031 00079 00049 41 00028 00071 000395 42 00025 00064 000321 43 00022 00056 000246 44 000198 00050 000196 45 000176 00045 46 000157 00040 47 000140 00036 48 000124 00031 49 000110 00028 50 000099 00025
Conversion TablesAWG Conversion Table (Average Value)
Catalog 1654292-2Revised 06-2016
PAGE X TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Table of ContentsTable of Contents
AMP SUPERSEAL 15Series Connectors
Page
Powe
rtrain
Syste
ms
Safe
ty amp
Secu
rity
Syste
ms
Conv
enien
ce
Drive
r
Info
rmat
ion
Body
amp Ch
assis
Syste
ms
AMP SUPERSEAL 15 Series Connectors
Introduction 1
15 mm Receptacle Contacts 2 l l l l l
15 mm Tab Contacts 3 l l l l l
Single Wire Seals and Cavity Plug 4 l l l l l
Plug Housings 1 ndash 6 Positions 5 l l l l l
Cap Housings 1 ndash 6 Positions 6 l l l l l
Rubber Boots 7 l l l l l
Application Tooling 9
Numerical Index 10
TE Connectivity online 12
Global Contacts 13
Imprint 13
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016
PAGE VIII TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
At TE Connectivity we support your RoHS requirements Wersquove assessed more than 15 million end
itemscomponents for RoHS compliance and issued new part numbers where any change was
required to eliminate the restricted materials Part numbers in this catalog are identified as
RoHS Compliant Part numbers in this catalog are RoHS Compliant unless marked otherwise These products comply
with European Union Directive 200295EC as amended 1 January 2006 that restricts the use of
lead mercury cadmium hexavalent chromium PBB and PBDE in certain electrical and electronic
products sold into the EU as of 1 July 2006
Note For purposes of this Catalog included within the definition of RoHS Compliant are products
that are clearly ldquoOut of Scoperdquo of the RoHS Directive such as hand tools and other non-electrical
accessories
Non-RoHS Compliant These part numbers are identified with a ldquotrdquo symbol These products do not comply with the material
restrictions of the European Union Directive 200295EC
5 of 6 Compliant A ldquolrdquo symbol identifies these part numbers These products do not fully comply with the European
Union Directive 200295EC because they contain lead in solderable interfaces (they do not contain
any of the other five restricted substances above allowable limits) However these
products may be suitable for use in RoHS applications where there is an application-based
exception for lead in solders such as the server storage or networking infrastructure exemption
Note Information regarding RoHS compliance is provided based on reasonable inquiry of our
suppliers and represents our current actual knowledge based on the information provided by our
suppliers This information is subject to change For latest compliance status refer to our website
referenced below So whatever your questions when it comes to RoHS wersquove got the answers at
httpwwwTEcomcustomersupportrohssupportcenter
Getting the information you need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your
questions and support your RoHS needs A RoHS FAQ (Frequently Asked Questions) is available
with links to more detailed information You can also submit RoHS questions and receive a
response within 24 hours during a normal work week The Support Center also provides
bull Cross-Reference from Non-compliant to Compliant Products
bull Ability to browse RoHS Compliant Products in our on-line catalog
wwwTEcomcommercealtRohsAltHomedo
bull Downloadable Technical Data Customer Information Presentation
bull More detailed information regarding the definitions used above
RoHS Ready Restriction on the Use of Hazardous Substances (RoHS)
Catalog 1654292-2Revised 06-2016
PAGE IXTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
RemarkenspStarting from 003 mm2 (AWG 32) a wire can be crimped
AWG Code Diameter (Inch) Diameter (mm) F (mm2)
000000 05800 14733 1700 00000 05165 13130 1350 0000 04600 11684 1038 000 04096 10400 0790 00 03648 9270 0675 0 03249 825 0534 1 02893 734 0422 2 02576 655 337 3 02294 582 266 4 02043 518 210 5 01819 462 169 6 01620 04115 1325 7 01443 366 1025 8 01285 326 834 9 01144 290 66 10 01019 259 527 11 00907 230 415 12 00808 205 33 13 00720 183 263 14 00641 163 208 15 00571 145 165 16 00508 129 1305 17 00453 114 101 18 00403 102 079 19 00359 091 065 20 00320 081 051 21 00285 072 0407 22 00253 064 032 23 00226 0057 0255 24 00201 0051 0205 25 00179 00455 0162 26 00159 00400 0125 27 00142 00360 0102 28 00126 00320 008 29 00113 00287 00646 30 00100 00254 00516 31 00089 00226 004 32 00080 00203 00324 33 00071 00180 00255 34 00063 00160 002 35 00056 00142 00158 36 00050 00127 00127 37 00045 00114 001 38 00040 00101 0008 39 00035 00089 00062 40 00031 00079 00049 41 00028 00071 000395 42 00025 00064 000321 43 00022 00056 000246 44 000198 00050 000196 45 000176 00045 46 000157 00040 47 000140 00036 48 000124 00031 49 000110 00028 50 000099 00025
Conversion TablesAWG Conversion Table (Average Value)
Catalog 1654292-2Revised 06-2016
PAGE X TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Table of ContentsTable of Contents
AMP SUPERSEAL 15Series Connectors
Page
Powe
rtrain
Syste
ms
Safe
ty amp
Secu
rity
Syste
ms
Conv
enien
ce
Drive
r
Info
rmat
ion
Body
amp Ch
assis
Syste
ms
AMP SUPERSEAL 15 Series Connectors
Introduction 1
15 mm Receptacle Contacts 2 l l l l l
15 mm Tab Contacts 3 l l l l l
Single Wire Seals and Cavity Plug 4 l l l l l
Plug Housings 1 ndash 6 Positions 5 l l l l l
Cap Housings 1 ndash 6 Positions 6 l l l l l
Rubber Boots 7 l l l l l
Application Tooling 9
Numerical Index 10
TE Connectivity online 12
Global Contacts 13
Imprint 13
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016
PAGE IXTE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
RemarkenspStarting from 003 mm2 (AWG 32) a wire can be crimped
AWG Code Diameter (Inch) Diameter (mm) F (mm2)
000000 05800 14733 1700 00000 05165 13130 1350 0000 04600 11684 1038 000 04096 10400 0790 00 03648 9270 0675 0 03249 825 0534 1 02893 734 0422 2 02576 655 337 3 02294 582 266 4 02043 518 210 5 01819 462 169 6 01620 04115 1325 7 01443 366 1025 8 01285 326 834 9 01144 290 66 10 01019 259 527 11 00907 230 415 12 00808 205 33 13 00720 183 263 14 00641 163 208 15 00571 145 165 16 00508 129 1305 17 00453 114 101 18 00403 102 079 19 00359 091 065 20 00320 081 051 21 00285 072 0407 22 00253 064 032 23 00226 0057 0255 24 00201 0051 0205 25 00179 00455 0162 26 00159 00400 0125 27 00142 00360 0102 28 00126 00320 008 29 00113 00287 00646 30 00100 00254 00516 31 00089 00226 004 32 00080 00203 00324 33 00071 00180 00255 34 00063 00160 002 35 00056 00142 00158 36 00050 00127 00127 37 00045 00114 001 38 00040 00101 0008 39 00035 00089 00062 40 00031 00079 00049 41 00028 00071 000395 42 00025 00064 000321 43 00022 00056 000246 44 000198 00050 000196 45 000176 00045 46 000157 00040 47 000140 00036 48 000124 00031 49 000110 00028 50 000099 00025
Conversion TablesAWG Conversion Table (Average Value)
Catalog 1654292-2Revised 06-2016
PAGE X TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Table of ContentsTable of Contents
AMP SUPERSEAL 15Series Connectors
Page
Powe
rtrain
Syste
ms
Safe
ty amp
Secu
rity
Syste
ms
Conv
enien
ce
Drive
r
Info
rmat
ion
Body
amp Ch
assis
Syste
ms
AMP SUPERSEAL 15 Series Connectors
Introduction 1
15 mm Receptacle Contacts 2 l l l l l
15 mm Tab Contacts 3 l l l l l
Single Wire Seals and Cavity Plug 4 l l l l l
Plug Housings 1 ndash 6 Positions 5 l l l l l
Cap Housings 1 ndash 6 Positions 6 l l l l l
Rubber Boots 7 l l l l l
Application Tooling 9
Numerical Index 10
TE Connectivity online 12
Global Contacts 13
Imprint 13
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016
PAGE X TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Table of ContentsTable of Contents
AMP SUPERSEAL 15Series Connectors
Page
Powe
rtrain
Syste
ms
Safe
ty amp
Secu
rity
Syste
ms
Conv
enien
ce
Drive
r
Info
rmat
ion
Body
amp Ch
assis
Syste
ms
AMP SUPERSEAL 15 Series Connectors
Introduction 1
15 mm Receptacle Contacts 2 l l l l l
15 mm Tab Contacts 3 l l l l l
Single Wire Seals and Cavity Plug 4 l l l l l
Plug Housings 1 ndash 6 Positions 5 l l l l l
Cap Housings 1 ndash 6 Positions 6 l l l l l
Rubber Boots 7 l l l l l
Application Tooling 9
Numerical Index 10
TE Connectivity online 12
Global Contacts 13
Imprint 13
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 1TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL15 SERIES CONNECTORS
INTRODUCTION
POWERTRAIN SYSTEMS
SAFETY amp SECURITY SYSTEMS
CONVENIENCE
DRIVER INFORMATION
BODY amp CHASSIS SYSTEMS
4
4
4
4
4
TE Connecitivty has deve l oped the AMP SUPERSEAL 15 series con nector family to meet the increasing re quire ments for reliability and water proofness
AMP SUPERSEAL 15 series con nector exceed the re quirements prescribed by IP 67 accord ing IEC 60529 and DIN 40050-9 stand ards and has its appli cation in the auto motive agri culture and industrial machinery
For sensor ap pli cation the AMP SUPERSEAL 15 series Con nector system is qualified as well
Advantages
n Compact system minimizes packaging requirements
n Sealing reliability proven under harsh conditions
n Designed for ease of manual harness assembly engine mounting and under hood environments
Applications
n Wire-to-Wire (15 mm) and ECU applications under hood or any location where sealing is required
n Suit able for automotive truck bus or off-road vehicles
Application Tooling NoteFor further information please visit httpwwwtecomproductsapplication-toolinghtmlfor our Search Function
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 2 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
15 mm Receptacle Contacts
15 mm Receptacle Contacts
Technical Features
Contact FinishTin plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Insulation Diameter12 ndash 33 mm FLR
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification 114-20045
15 mm Receptacle Contacts
16
25
85
165
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16
CuSn
tin plated
282403-12151734-2
2266249-2 )Hand Tool Frame 539635-1
Die-Set 539773-2
075 ndash 150 240 ndash 335 17 ndash 24 282110-12151205-2
2266053-2 )58583-1
150 ndash 250 315 ndash 380 22 ndash 33 282466-1 2151856-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 3All specifications subject to change Consult TE Connectivity for latest specifications
15 mm Tab Contacts
15 mm Tab Contacts
Technical Features
Contact FinishTin plated gold plated
Current Carrying Capacity14 A max
Wire Size Range035 ndash 25 mm2
Extraction ToolPart No 9-1579007-1
Product Specification108-20090
Application Specification114-20045
15 mm Tab Contacts
15
08
104
227
Wire Size Range(mm2)
Insulation Diameter (mm) Materialand Finish
Part Numbers
FLK FLR Strip Form Applicator Hand Tool
035 ndash 050 145 ndash 220 12 ndash 16CuZn tin plated 282404-1
2151855-2Hand Tool Frame 539635-1
Die Set 539773-2CuZn gold plated 282404-3
075 ndash 150 240 ndash 335 17 ndash 24CuZn tin plated 282109-1 2151204-2
2266068-2 )58583-1
CuZn gold plated 282109-3
150 ndash 250 315 ndash 380 22 ndash 33 CuZn tin plated 282465-1 2266253-2 ndash
) Use in Stripper Seal Crimp Terminator
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 4 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Single Wire Seals and Cavity Plug
Single Wire Seals and Cavity Plug
Technical Features
n Made from silicon rubber material
n For insulation diameters of 12 ndash 33 mm
n Loose-piece wire seals are crimped simultaneously with the contacts
Single Wire Seals and Cavity Plug
61
78
oslash 59
Insulation Diameter (mm) Color Part Number
12 ndash 16 Green 281934-4
17 ndash 24 Yellow 281934-2
25 ndash 33 Red 281934-3
Cavity Plug Red 282081-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 5All specifications subject to change Consult TE Connectivity for latest specifications
Plug Housings (utilizes Receptacle Contacts)
Plug Housings
Technical Information
Product Specification108-20090
Application Specification412-20000
190
Pitch60
A
oslash A
280 )
190
280 )
) with secondary lock closed
1 to 6 positions
Plug Housings
No of Positions Dimension A (mm) Part Number
1 93 282079-2
2 153 282080-1
3 213 282087-1
4 273 282088-1
5 333 282089-1
6 393 282090-1
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 6 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Cap Housings (utilizes Tab Contacts)
Cap Housings
Technical Information
Extraction Toolfor Secondary Lockof Cap HousingPart No 785084-1
Insertion Toolfor Secondary Lockof Cap HousingPart No 785061-1for 1 and 2 positionsPart No 785061-2for 3 ndash 6 positions
Product Specification108-20090
Detail ldquoXrdquo
Pitch60
A
oslash A
420
Also suitable for panel mount application (see Detail ldquoXrdquo)
1 to 6 positions
Cap Housings
No of Positions Dimension A (mm) Part Number
1 138 282103-1
2 198 282104-1
3 258 282105-1
4 318 282106-1
5 378 282107-1
6 438 282108-1
420
163
138
163
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 7All specifications subject to change Consult TE Connectivity for latest specifications
Rubber Boots
Rubber Boots
No of PositionsConnector Housing
Part NumberDescription
Rubber BootPart Number
Color
2282080-1 Plug Housing
880810-1 Black282104-1 Cap Housing
3282087-1 Plug Housing
880811-2 Black282105-1 Cap Housing
5282089-1 Plug Housing
880814-1 Black282107-1 Cap Housing
570
oslash 110
oslash C
D
A B
Dimensional Data
No of WiresBoot
Part Number
Dimensions (mm)
A B C D
2 880810-1 125 205 46 50
3 880811-2 175 255 46 50
4 493581-1 210 345 ndash 70
5 880814-1 275 350 65 70
) Different style see customer drawing
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 8 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 9All specifications subject to change Consult TE Connectivity for latest specifications
Application Tooling
APPLICATION TOOLINGAND EQUIPMENT
INTRODUCTION
TE Application Tooling is dedicated to providing high quality equipment options to meet all levels of our connector products specifications We are also able to provide a broad range of equipment for other manufacturerrsquos products
Our equipment range is vast and almost unmatched by others operating in the same industry segments as is our global presence and support network in the form of field service engineers and product managers We supply everything from simple hand tools to the most complex automated systems
Equipment is segregated into two types and managed accordingly
Generic equipment
Where we can supply you with sufficient information referenced by Part Number such that you can identify and order what you need yourself
Specialised Equipment
Where you will need help from our specialist product managers to identify whatrsquos just right for your Application
Finding Equipment Online
wwwtoolingtecom
n Powerful searches to find generic equipment options (Hand Tools Applicators)
n Brochures and more detailed flyers for the specialised equipment
n Itrsquos quick easy and more importantly the latest and most up to date information is available online
Regional Assistance
wwwtecomsupport-center
Imag
es r
ep
rese
nta
tive
of
too
l typ
e o
nly
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
AMP SUPERSEAL 15 Series ConnectorsCatalog 1654292-2Revised 06-2016
Numerical Index
Receptacle HousingsNumerical Index
Part Number Page Part Number Page Part Number Page
PAGE 10 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
281934-2 4
281934-3 4
281934-4 4
282079-2 5
282080-1 5
282081-1 4
282087-1 5
282088-1 5
282089-1 5
282090-1 5
282103-1 6
282104-1 6
282105-1 6
282106-1 6
282107-1 6
282108-1 6
282109-1 3
282109-3 3
282110-1 2
282403-1 2
282404-1 3
282404-3 3
282465-1 3
282466-1 2
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 11TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
PAGE 12 TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
TE CONNECTIVITYONLINETEcom offers an enhanced digital experience with more than 250000 parts profiled The site has
deep rich product data and easier access to tools and services Other offerings include improved
search and navigation and knowledge and idea sharing
TEcom offers a variety of product-specific catalogs brochures
white papers and other technical information To download our
literature visit
wwwtecomautomotiveliteraturehtml
COLLATERAL
Search for a specific product by category part number
or document number
wwwTEcom
PRODUCT INFORMATION
You can rely on TErsquos PIC Team to answer your general or technical
questions To contact a PIC representative visit
wwwTEcomsupport-center
STAY CONNECTED
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
Catalog 1654292-2Revised 06-2016 AMP SUPERSEAL 15 Series Connectors
PAGE 13All specifications subject to change Consult TE Connectivity for latest specifications
DISCLAIMER
While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog TE does not guarantee that it is error-free nor does TE make any other representation warranty or guarantee that the information is accurate correct reliable or current TE reserves the right to make any adjustments to the information cont-ained herein at any time without notice
TE expressly disclaims all implied warranties regarding the information contained herein including but not limited to any implied warranties of merchantability or fitness for a particular purpose The dimensions in this catalog are for reference purposes only and are subject to change without notice Specifications are subject to change without notice Consult TE for the latest dimensions and design specifications
TRADEMARKS
AMP SUPERSEAL 15 TE TE Connectivity and TE connectivity (logo) are trademarks
Other product names logos and company names mentioned herein may be trademarks of their respective owners
COPYRIGHT
copy 2016 TE Connectivity family of companies
All rights reserved
TE Connectivity Germany GmbH certified acc ISO 14001 and ISOTS 169492002
TE Connectivity Germany GmbH Ampegraverestrasse 12ndash14 | 64625 Bensheim | Germany Phone +49 (0)6251 133-0 Fax +49 (0)6251 133-1600
Germany ndash Bensheim
Product Information Center Phone +49 6251-133-1999 Fax +49 6251-133-1988
United States ndash Harrisburg
Product Information Center Phone +1 800-522-6752 Fax +1 717-986-7575
South America
Phone +54 11-4733-2015 Fax +54 11-4733-2083
South Africa ndash Port Elizabeth
Phone +27 41-503-4500 Fax +27 41-581-0440
EUROPE UNITED STATES SOUTH AMERICA AFRICA
ContactthinspthinspImprint
Australia ndash Sydney
Product Information Center Phone +61 2-9840-8200 Fax +61 2-9634-6188
Peoplersquos Republic of China
Hong Kong Phone +852 2738-8731 Fax +852 2735-0243
Peoplersquos Republic of China
Shanghai Phone +86 21-3398-0000 Fax +86 21-3398-1999
Korea ndash Seoul
Phone +82 2-3415-4500 Fax +82 2-3486-3810
ASIAthinspthinspPACIFIC
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors
165
42
92
-2 |
Re
vis
ed
06
-20
16 |
PD
F o
nly
TE AUTOMOTIVE AMP SUPERSEAL 15 Series Connectors