+ All Categories
Home > Documents > AMPLITUDE MODULATION

AMPLITUDE MODULATION

Date post: 25-Jan-2016
Category:
Upload: baakir
View: 149 times
Download: 2 times
Share this document with a friend
Description:
AMPLITUDE MODULATION. Amplitude modulation is the process in which amplitude of the high frequency carrier wave is varies in accordance with the instantaneous value of modulating signal. EXPRESSION FOR AMPLITUDE MODULATED WAVE. Let the modulated signal be represented as - PowerPoint PPT Presentation
17
Amplitude modulation is the process in which amplitude of the high frequency carrier wave is varies in accordance with the instantaneous value of modulating signal. EXPRESSION FOR AMPLITUDE MODULATED WAVE Let the modulated signal be represented as em = Em sinwmt …(1) And the carrier signal be represented as. ec = Ec sinwct (2) “Depth of modulation” (m) or the “modulation index” is given by m= Em/Ec Now the amplitude of the modulated signal is given by e
Transcript

Amplitude modulation is the process in which amplitude of the high frequency carrier wave is varies in accordance with the instantaneous value of modulating signal.

EXPRESSION FOR AMPLITUDE MODULATED WAVE

Let the modulated signal be represented as em = Em sinwmt …(1)

And the carrier signal be represented as.

ec = Ec sinwct … (2)

“Depth of modulation” (m) or the “modulation index” is given by

m= Em/Ec

Now the amplitude of the modulated signal is given by

A=Ec + em

= Ec + Em sinwmt = Ec +m Ec sinwmt = Ec [1+m sinwmt] … (3)Thus amplitude modulated signal can be represented in time domain as

E = A sin0E= A sinwct

= Ec [1+m sinwmt]* sinwct

= Ec sinwct +mEc sinwct sinwmt

= Ec sinwct +(mEc /2)*2 sinwct sinwmt

= Ec sinwct +(mEc /2) [cos( wc +wm)t + cos( wc-wm)t] …(4) Thus it has been shown that the equation of an amplitude modulated wave contains three terms. The first term is identical to equation (2) and represent the the unmodulated carrier. It is thus apparent that the process of amplitude modulation has the effect of adding term to the unmodulated wave, rather than changing it.

Modulation index can be practically can be calculated measured using two method.

•Using an AM signal.

•Using an trapezoidal display.

Carrier signal

Modulating signal

Modulator

CRO

(a) Modulating signal(b) Carrier signal

t t

t

Emax

Emin

Ec

Em

Em

(c) Amplitude modulated signal

Q.1) M = Emax-Emin Emax+Emin

Sol. M=Em/Ec

m = Emax - Emin/2 ….1

Ec=Emax - Em

=Emax -( Emax-Emin/2 )

=Emax+Emin/2 …2

Dividing (1) by (2)

M = Emax-Emin …3 Emax+Emin

Equation (3) standard method of evaluating modulation index

Modulated signalAM signalt

Em

EcA

B

In this method the Am signal is connected vertical deflection and the modulation signal is applied to the horizontal deflection plate of the oscilloscope. The display on the screen of oscilloscope is trapezoidal as shown in fig.

A=2(Ec + Em) ……1

B=2( Ec-Em) ……2

Adding (1) and (2)A+B=4Ec

Ec=(A + b) / 4 ……3

subtracting (1) and (2)A-B=4Em

Em= (A-B) / 4 …….4

Modulation index

mf = Em/ Ec = (A-b) / ( A+b )

Relative Power Distribution in AM Wave

It is clear that modulated carrier wave contain more power as compared to unmodulated wave became of fact it contain two or more side band. The total power will depend upon the modulation index.

Pt = Ec + ELSB + EUSB ………….(1) R R R

Where all the voltage signal have r.m.s value and R represents the antenna resistance.

2 22

Pc = (Ec / )

R

=Ec /2R ……………(2)

Similarly Plsb = Pusb = [ (m Ec/2) / 2 ] =m Ec / 8R ………(3)

2

2

2

2

2 2

Putting the value of (2) and (3) in equation (1). Then result is :

The maximum power in the AM corresponding to m=1 is Pt = 1.5 Pc.This is important that relevant amplifier must be capable of handling without distortion.

Current CalculationLet Ic be the unmodulated carrier current and It be the modulated current r is the resistance in which the current flow.

Pt / Pc = It R / Ic R = [ 1 + m /2 ]

It / Ic = 1 + m / 2

It = Ic 1+ m / 2

2

Pt = Pc [ 1 + m / 2]

2

2

222

2

If the frequency of the carrier is made to varying in accordance with instantaneous Value of the modulating signal, the process is called FM.

Expression: In FM the frequency of the carrier varies the amount by which the carrier frequency and varied from its unmodulated value is called deviation. And the deviation is perpendicular to the Instantaneous value of modulating signal. The instantaneous value of frequency of the modulated carreier is given by:

f = fc + fc kf Em coswmt = fc [1 + kf Em coswmt ] ……..(1)

Fc = unmodulated carrier frequency. Kf = proportionality constantEm coswmt = Instantaneous modulated voltage

Maximum Frequency deviation

fmin = fc (1-kEm)fmax = fc (1+kEm)[]

= fmax – fc = fc – fmin = kf Emfc ……….2

Considering again equation (1)f = fc [1 + kf Em coswmt ]

w = wc [1 + kf Em coswmt ] But angular velocity

W= do / dt

O = wdt

Put the value of w

O = wc [1 + kf Em cos wmt ] dt = wct + wc kf Em sinwmt wm

fmin

fmax

fc

O(t) = wct + sinwmt …………(3) from 2 fm

The carrier wave efmt may be written as

efm(t) = Ec sinO(t)

Put the value of O(t) in above equation

efm(t) = Ec sin (wct + sinwmt ) ………..(4) fm

The modulation index of FM

Mf = Max frequency deviation = ……….(5) Modulating frequency fm

From equation (4) and (5)efm(t) = Ec sin (wct + Mf fm sinwmt ) ………..(4) fm efm(t) = Ec sin (wct + Mf sinwmt ) Ans.

The Expression for FM is not simple. It is complex since, it is a sine of sine function. The only way to solve this equation is using Bessel’s Function. By using Bessel’s Function. The equation for FM wave can be expanded. As follows.efm = s(t)= Ec { jo (Mf) sinwct } + j1Mf { sin( wc +wm)t – sin (wc-wm)t } +j2Mf { sin(wc+2wm) t + sin (wc-2wm)t }+ j3Mf { sin( wc+3wm)t – sin (wc-3wm)t } + j4Mf { sin( wc +4wm)t – sin (wc-4wm)t } +………….(*)1.The FM wave constant of carrier. The first term in equation the carrier.2.FM consist of infinite no. of side band. All terms except first term.3.The amplitude of the carrier and the side band depend is depends on ‘j’ coefficient. The value of these coefficient can be term the graph.

For equation j1(Mf) denotes the value of j1 for the particular value of Mf written inside the bracket.

Mf jo j1 j2

.01 ---------- ------ --------- .25 --------- -------- ---------

In Mf wave, the total transmitted power always remain constant. It is not dependent upon modulation index. The region for this is that the amplitude of FM wave is constant.

Pt =( a/ 2) = A

Where ’A’ peak amplitude of FM wave .It is equal to

Pt = A where R =1

2 2

RR

2

R

1) Amplitude of AM wave will change

With modulating voltage.

2) Transmitted power is dependent on the Modulation index.

3) Carrier power and one side band power is useful.

4) AM receiver are non immune to noise.

5) It is not possible to decrease noise further by increasing deviation

Amplitude of Fm is constant. It is independent of modulation index.

Transmitted power remain constant. It is interdependent on the Modulation index.

All the transmitted power is useful.

They are immune to noise.

It is possible to decrease noise further by increasing deviation

Bandwidth = 2( + fm ) .

BW depends on . BW is much less than FM.

Ground wave and sky wave propagation is used. Therefore large area is concerned.

AM equipments for modulation are less complex.

No. of side band will be two and more constant.

Bandwidth = 2 fm

BW is large hence wide channel is required.

Space wave is used for propagation so radius of transmission is limited.

FM transmission and reception the equipment are complex.

NO. of side band having significant amplitude depends upon modulation index.

S(t) = Ec sin( wct + mf sinwmt)

Frequency modulation is proportional to modulating voltage.

Mf is proportional to modulating voltage as well as the modulating frequency.

It is widely used. It is possible to receive FM

on PM receiver Noise immunity is better

than AM an PM

S(t) = Ec sin( wct + mp sinwmt) Phase modulation is

proportional to modulating voltage.

Mp is proportional only to modulating voltage.

Used in some mobile system. It is possible to receive PM on

FM receiver. Noise immunity is better than

AM but worst than PM

PM


Recommended