+ All Categories
Home > Documents > AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and...

AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and...

Date post: 05-Jul-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
12
1 20 19 S January 22-26, 2019 Marine Technician Training 6305 SR 70 E. (53 rd Ave. E.) Bradenton, FL 34203
Transcript
Page 1: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

1

20 19

S

January 22-26, 2019

Marine Technician Training

6305 SR 70 E. (53rd Ave. E.)

Bradenton, FL 34203

Page 2: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

2

About The National Marine Service Expo

Under the management of MCTINA, NMSE is being held for the 27th year.

NMSE has been dedicated to marine service and has been held annually in

Florida since 1992. This year MCTINA is moving to Manatee Technical College

in Bradenton, FL for the first time. MCTINA intends to rotate NMSE to different

regions of the country annually. Last year’s training was held in St. Joseph, MI.

Plans are to bring NMSE training to each region of the U.S. every 3rd or 4th

years. As the only service-oriented training event in the marine industry that

trains technicians already working in the boating industry, it provides valuable

update technical training for service professionals who are interested in

advancing their careers. NMSE technical training workshops are ideal for

workers who require training on specific systems, or technicians needing to

stay abreast of advancing technology who cannot take time off to attend school

full time. All attendees receive a certificate of completion and course credits

that will be applied toward the AMTECH (Alumni of MCTINA Technicians)

Specialist Program in their chosen area of Outboard or Inboard - I/O. See page

5 for more details.

Page 3: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

3

Table of Contents

Contact MCTINA Information – Cancellation Policy ................................. 3 Technical Workshop Course Descriptions ................................................ 4 AMTECH Specialist Program .................................................................... 5 Lodging – Country Inn & Suites by Radisson ............................................ 6 Directions to Bradenton (From Tampa Int’l Airport) ................................ 7 Directions to Manatee Tech and Hotel – course Timeline ....................... 8 NMSE Course Fees and Registration Form ............................................... 9 Individual Tuition Registration Form for Annual Support ...................... 10 Business Tuition Registration Form for Annual Support ........................ 11 Online Tech Info Exchange Support Request Form ................................ 12

Contact Us

Questions about NMSE? Contact Joe De Marco or Matt Misuraca

[email protected] - [email protected]

GET TECHNICAL SUPPORT FROM THE MCTINA PROFESSIONALS USE ONLINE REQUEST FORM ON PAGE 12

MCTINA • 513 River Estates Parkway • Canton, GA 30115

Phone: 770-720-4382 • Fax 770-720-4329 • www.mctina.org

NMSE Cancellation Policy: 100% 30 days or more ● 50% 15-29 days ● 0% less than 14 days

Page 4: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

4

NMSE ’19 Technical Training Workshop Descriptions

OUTBOARD TRAINING (OB Series)

OB-302-08 Outboard 4-Stroke System Technology This course is designed to teach the basics of four-cycle gasoline outboard theory as well as the terminology, measuring instruments, special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs will be used during this course. This course is presented by Mark Kramer and Sean Hill. Mark Kramer is a master technician for diesel, automotive and marine with more than 20 years experience. His extensive experience covers all combustion engines and electrical systems, as well as DFI, EFI, engine diagnostics. Sean Hill has over 30 years experience in electronics and more than 20 years in the boating industry. He’s a former EFI engineer for CDI Electronics. (3-Hour Evening Course) OB-302.1-03 Outboard 4-Stroke Theory

This condensed evening course will cover fuel and electrical systems of the 4-stroke engine. Basic troubleshooting tips will be covered. Mark Kramer and Sean Hill will conduct this course.

OB-E05-08 Outboard 2-Stroke Technology – Mercury Optimax / Yamaha HPDI / Evinrude E-TEC This course will sharpen your existing maintenance and troubleshooting skills on Mercury Optimax, Yamaha HPDI and Evinrude E-TEC direct injected 2-stroke engines. Systems include engine specifications, theory of operation, diagnosing of the air/fuel delivery systems, operating ranges, engine component locations, maintenance/ service procedures, special tools, troubleshooting strategies, fault codes, break-in procedures, common failures, service bulletins, as well as do’s and don'ts. Special attention will be placed on the electrical and fuel systems of each engine, as well as the diagnostics unique to each brand. This course is presented by Mark Kramer and Sean Hill. (3-Hour Evening Course) OB-E05.1-03 Outboard 2-Stroke Theory

This condensed evening course will cover fuel and electrical systems of the 2-stroke engine. Basic troubleshooting tips will be covered. Mark Kramer and Sean Hill will conduct this course.

OB-E02-08 Yamaha Maintenance and Service (Elective) (Updated Course) This course will improve your skills in servicing and diagnosing Yamaha two and four-stroke engine systems. Included will be the operation & fundamental troubleshooting procedures for two-stroke PBS (Precision Blend) oiling systems and HPDI (High Pressure Direct Injection systems). Four-stroke EFI, electrical systems, VCT (Variable Valve Timing) operation, and servicing and troubleshooting will also be covered. This course is taught by Mark Kramer and Sean Hill. .

TECHNICAL SKILL SET TRAINING (SS Series) SS-103-08 CAN Bus Systems Technology (Prerequisite Course) Today’s hottest technology for both engine and boat system control is CAN Bus technology. CAN Bus is the new central nervous system (communication network) for modern marine systems and is used by virtually all engine manufacturers and most production boat builders. This technology allows the operator to observe and control the propulsion system, electronic navigation, and other systems such as fuel and water tanks. As complex as it sounds, the built-in diagnostics simplify the use and diagnostics of the CAN Bus system. This course will explain the architecture of the CAN Bus, how it works and the various versions used today. Not all CAN Bus systems are the same or compatible. Hands-on experience with a simplified CAN Bus system is used. Conrad Kreuter is the instructor for this course. Conrad is an instructor for Kingsborough Community College in Brooklyn, NY. SS-102-08 Electrical Systems: Troubleshooting and Theory (Prerequisite Course) Finally, understand how electricity works! This course provides students with the proper fundamental knowledge and theory of electricity and how it interfaces with marine systems. Topics to be covered are: basic DC electricity theory; ohm’s law; magnetism; wire sizing; parallel and series circuits; batteries, basic wiring, switching devices, isolators, battery combiners; advanced battery systems; typical 20-foot boat wiring layout, and troubleshooting. ABYC specifications are used throughout the course. This course is taught by Conrad Kreuter, Kingsborough Community College. (3-Hour Evening Course) SS-102.1-03 Electrical System Theory

This evening course provides students with the basic fundamental knowledge and theory of electricity and how it interfaces with marine systems. This course is taught by Conrad Kreuter.

Page 5: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

5

In addition to the course credits received from taking MCTINA training during NMSE ’19 all students who have taken MCTINA training courses within the last five years (Jan. 2013 to the present) will also receive credit toward their specialist path of choice. Once the required numbers of credits are successfully completed students will qualify to take the final exam to gain AMTECH recognition in the following specialties:

• Outboard Engine Specialist • Inboard I/O Engine Specialist • Advanced Systems Specialist (combines both OB and Inboard)

AMTECH SPECIALIZATION COURSE REQUIREMENTS Prerequisite Courses (for all categories)

SS101-08 Principles of Troubleshooting SS102-08 Electrical Systems; Troubleshooting and Theory SS103-08 CAN bus System Technology 24 hours Total hours of prerequisite training required

Required Courses for each category OUTBOARD SPECIALIST INBOARD I/O SPECIALIST

OB101-08 OB Systems Troubleshooting IO101-08 Inboard I/O Engine Systems OB102-08 OB Electronic Ignition & Diag. Software IO102-08 Sterndrive Sys. Troubleshooting & Repair OB103-08 OB Rigging and Installation IO201-08 Advanced Inboard EFI Technology OB201-08 OB EFI Technology IO301-08 Inboard Transmission - ZF & Borg Warner OB301-08 OB DFI Technology IO303-08 Alpha, Bravo Systems and Servicing OB302-08 OB 4-Stroke Technology IO304-08 Inboard Computerized Diagnostic Equip. OB304-08 OB Computerized Diagnostic Equipment IO401-08 Analyzing Sterndrive Engine Failure 56 hours Total hours of Outboard required 56 hours Total hours of Inboard I/O required

NOTE: Prerequisite courses are only required for completion of AMTECH Specialization Technicians can take any MCTINA training course of their choosing at any time

Page 6: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

6

NMSE ’19 LODGING

Country Inn & Suites by Radisson 5610 Manor Hill Ln • Bradenton, FL 34203 ● (941) 363-4000

Rate: $99.00 plus tax per night for Single/Double (normal Jan. rate $120-$165)

Hotel amenities include: • Complimentary full American hot breakfast buffet • Free high speed internet (Wi-Fi & wired) • Coffee, tea, fresh baked cookies in the lobby 24/7 • Outdoor heated swimming pool • Business center with 2 computers and printer • State-of-the-art fitness center • On-site guest laundry • Read it & Return Lending Library

Be sure to ask for the special MCTINA DISCOUNT when making your reservations for NMSE ’19

In order to receive this special discount rate you must do one of the following: 1) Use this direct link http://tinyurl.com/CIS-MCTINA 2) Call the Bradenton Country Inn & Suites directly at 941-363-4000 3) Call the Country Inn & Suites national reservation desk at 800-456-4000 4) NOTE: DO NOT MAKE RESERVATIONS through online discount reservation services!

SPECIAL REGISTRATION DISCOUNT CUT OFF DATE IS DECEMBER 22, 2018

Page 7: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

7

DIRECTIONS

Tampa International Airport to Bradenton, FL

From Tampa International Airport – Continue to I-275 S ..................................................... 3.5 mi • Head north on Airport Recirculation Dr. 20 ft • Keep right to continue on Blue Departure Dr. 0.3 mi • Slight left onto George J. Bean Outbound Pkwy/George J. Bean Pkwy 3.1 mi

Follow I-275 S and I-75 S to FL-70 W in Manatee County (Take exit 217 from I-75 S) .......... 48.5 mi

• Merge onto I-275 S (use right lane to turn slightly right to stay on I-275 S) 15.5 mi • Use right lane to turn slightly right to stay on I-275 S 0.8 mi • Keep right to stay on I-275 S 3.5 mi • Keep left to stay on I-275 S (Partial toll road) 16.9 mi • Use the left 2 lanes to merge onto I-75 S toward Naples 11.4 mi • Take exit 217 toward Arcadia 0.3 mi • Continue to FL-70 W to your destination 0.5 mi • Use the right 2 lanes to turn right onto FL-70 W 0.3 mi • Follow directions to college & hotel on page 8………………………………

See map and directions to college and hotel on page 8

Page 8: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

8

DIRECTIONS

To: Manatee Technical College To: Country Inn & Suites

6305 SR 70 E., Bradenton FL 34203 5610 Manor Hill Way, Bradenton, FL 34203 • Pass by Valvoline Instant Oil Change (on right) • Turn left onto Manor Hill Way • Turn right – Destination will be on the right Online Reservations: http://tinyurl.com/CIS-MCTINA

• Please register for one day time and/or one evening class per day • Day Classes are 8 hours from 8 am to 4 pm • Evening Classes are 3 hours from 6 pm to 9 pm

NMSE ’19 Courses 7:00 am 8:00 am - 4:00 pm 5:00 pm 6:00 pm - 9:00 pm

Monday CAMPUS CLOSED Tuesday Registration CAN Bus Systems Technology Registration Electrical Systems Theory Wednesday Registration Electrical Systems – Troubleshooting &Theory Registration OB 2-Stroke Theory Thursday Registration Yamaha Maintenance and Service Registration OB 4-Stroke Theory Friday Registration Outboard 2-Stroke System Technology Registration Saturday Registration Outboard 4-Stroke System Technology Registration

Page 9: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

9

January 22-26, 2019

Manatee Technical College • 6305 SR 70 E • Bradenton, FL I am registering as a current supporter of MCTINA for the following student(s) I am registering as a Non-supporter of MCTINA for the following student(s) My additional $150 fee is tax-deductible

See pages 10 & 11 for MCTINA supporter levels

COURSE FEES Day Classes Evening Classes + Fee for new supporters Course totals One student ............. $300 $150 + $150 (if req’d) Sub Total $ _____ Two students ............ $275 $137 + $150 (if req’d) Sub Total $ _____ Three students ......... $250 $125 + $150 (if req’d) Sub Total $ _____ Four + students ........ $225 $112 + $150 (if req’d) Sub Total $ _____ TOTAL $ _____

(Day classes highlighted in Yellow and Evening classes are highlighted in Blue) Cancellation Policy: 100% 30 days or more • 50% 15-29 days • 0% less than 14 days

Please print clearly and use one registration form for each person attending REGISTRATION 7:00 a.m. ON YOUR FIRST DAY OF TRAINING – 5:00 p.m. FOR EVENING COURSES

Your Name ___________________________________ Organization ________________________________________

Address ______________________________________ City ___________________________ St. ____ Zip ___________

Telephone ___________________Fax ___________________ Email Address __________________________________

Payment Method: Check No. _______ Check payable to MCTINA Credit Card

Credit Card Number _______________________________________ Exp ___/ ___ Sec. _______ Billing Zip __________

Name on card ____________________________________________________________________________________

Signature (Required) _______________________________________________________________________________

Course Number

Workshop Titles Day courses– 8:00 am – 5:00 pm / Evening 6:00 pm – 9:00 pm

TUES. 22nd

WED 23rd

THU 24th

FRI 25th

SAT 26th

SS-103

CAN Bus Systems Technology (Conrad Kreuter)

SS-101.1

Electrical Theory – (Conrad Kreuter) Evening Class

SS-101

Electrical Systems-Troubleshooting and Theory (Conrad Kreuter)

OB-E05.1

OB 2-Stroke Theory –(Kramer/Hill) Evening Class

OB-E02

Yamaha Maintenance and Service (Kramer and Hill)

OB-302.1

OB 4-Stroke Theory –(Mark Kramer and Sean Hill) Evening Class

OB-E05

OB 2-Stroke System Technology - Optimax & HPDI (Kramer and Hill)

OB-302

OB 4-Stroke System Technology (Mark Kramer and Sean Hill)

Page 10: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

10

Page 11: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

11

Page 12: AMTECH National Marine Service Expo '04 › pdfs › MC_NMSE_19_Brochure.pdf · special tools and diagnostic software necessary for work on these engines. Extensive hands-on labs

12

ONLINE TECHNICAL INFO EXCHANGE SUPPORT REQUEST FORM

\

PLEASE COMPLETE THIS FORM AND EMAIL TO: [email protected] or fax to (770) 720-4329 * Denotes Required Information – contact information is important in case one of our representatives has to contact you

*Company Name ______________________________________________ *Date ___________________

*Technician’s Name ____________________________________________________________________

*Telephone ______________________________ *Email ______________________________________

*Are you a current MCTINA supporter? Yes No I am interested please contact me

(Please check all that apply)

*Problem is related to: Engine System Boat System Ignition System Electrical System

Fuel System Charging System Cooling System Lower Unit Other __________________

*Engine Outboard Inboard I/O PWC Other ________________________________

*Engine Manufacturer ______________________________*Year_____ *HP_____ # of Cyls. _______

*Model # _______________*Serial # _______________ Fuel: Gas Diesel Other ____________

*Problem or Customer Complaint ________________________________________________________

_____________________________________________________________________________________

*Status of work done to date _____________________________________________________________

______________________________________________________________________________________

______________________________________________________________________________

Spark Plug Brand ______________ Spark Plug # ___________ Spark on which cyls.? __________________

Battery Brand ____________________ Battery Type ____________ Battery CCA ____________________

Fuel Pump Pressure Reading @ idle __________ Boost p.s.i. __________ Running ____________________

Fuel Vaccum _______ Fuel Sample Yes No Fuel Condition ________________________________

EFI Engines - How many filters? _______ Last changed? _________________________________________

Condition of fuel hose External______________________ Internal ___________________________

Scannable Motors – Engine Temp @ idle_______ Running_______ Notes___________________________

Additional Comments ______________________________________________________________________

_______________________________________________________________________________________

_______________________________________________________________________________________

GET ONLINE TECH SUPPORT FROM THE MCTINA PROFESSIONALS


Recommended