6502 South Yale Avenue, Suite 100, Tulsa, OK 74136 +1-918-960-3800 | www.roadscience.net ARRTEKK ® 1295 Cationic (+) Asphalt Emulsifier for Micro-Surfacing BETTER MICRO-SURFACING DURABILITY AND MIX CONTROL ArrTekk 1295 is an asphalt emulsifier chemical used to produce high-performing micro-surfacing emulsions conforming to typical specifications, including the International Slurry Surfacing Association’s A143: Recommended Performance Guideline for Micro- Surfacing. A preventive maintenance application, micro-surfacing provides an aesthetically pleasing, skid-resistant surface that restores the pavement profile and seals the underlying pavement, protecting it from deterioration. TECHNICAL DATA SHEET APPLICATIONS FEATURES EASY MIXING AND LAY-DOWN IN EXTREME CONDITIONS Plenty of mix time with warm pavement, aggregate and air temperatures QUICKER TRAFFIC RETURN TIME IN COOL CONDITIONS AND DURING NIGHT TIME PAVING Easy control of chemical break in cooler weather and at night for sooner traffic return and greater production rates FASTER CURING Chemical break squeezes water out of the system faster for less aggregate loss upon traffic return EMBEDDED ADHESION PROMOTER TECHNOLOGY Stronger asphalt-to-aggregate chemical adhesion provides a more durable and longer-lasting application with less raveling and 6-day Wet-Track Abrasion loss USE ARRTEKK 1295 WHEN YOU NEED: Better mix control in hot paving conditions Faster traffic return at night Longer-lasting micro-surfacing ASPHALT Compatible with most asphalts including paraffin-rich asphalts POLYMER MODIFIERS Compatible with styrene- butadiene rubber (SBR) and natural latexes AGGREGATE Can be formulated to perform with both reactive and unreactive aggregates of various types including limestone, granite, diabase, basalt and chert COMPATIBILITY • Micro-Surfacing • Cationic Quick-Setting (CQS) Slurry
Transcript
6502 South Yale Avenue, Suite 100, Tulsa, OK 74136
+1-918-960-3800 | www.roadscience.net
ARRTEKK® 1295Cationic (+) Asphalt Emulsifier for Micro-Surfacing
BETTER MICRO-SURFACING DURABILITY AND MIX CONTROL
ArrTekk 1295 is an asphalt emulsifier chemical used to produce high-performing micro-surfacing emulsions conforming to typical
specifications, including the International Slurry Surfacing Association’s A143: Recommended Performance Guideline for Micro-
Surfacing. A preventive maintenance application, micro-surfacing provides an aesthetically pleasing, skid-resistant surface that
restores the pavement profile and seals the underlying pavement, protecting it from deterioration.
TECHNICAL DATA SHEET
APPLICATIONS FEATURES
EASY MIXING AND LAY-DOWN IN EXTREME CONDITIONS
Plenty of mix time with warm pavement, aggregate and air temperatures
QUICKER TRAFFIC RETURN TIME IN COOL CONDITIONSAND DURING NIGHT TIME PAVING
Easy control of chemical break in cooler weather and at night for sooner traffi c return and greater production rates
FASTER CURING
Chemical break squeezes water out of the system faster for less aggregate loss upon traffi c return
EMBEDDED ADHESION PROMOTER TECHNOLOGY
Stronger asphalt-to-aggregate chemical adhesion provides a more durable and longer-lasting application with less raveling and 6-day Wet-Track Abrasion loss
USE ARRTEKK 1295
WHEN YOU NEED:
� Better mix control in hot paving conditions
� Faster traffi c return at night
� Longer-lastingmicro-surfacing
ASPHALT
Compatible with most asphalts including paraffi n-rich asphalts
POLYMER MODIFIERS
Compatible with styrene-butadiene rubber (SBR) and natural latexes
AGGREGATE
Can be formulated to perform with both reactive and unreactive aggregates of various types including limestone, granite, diabase, basalt and chert
COMPATIBILITY
• Micro-Surfacing
• Cationic Quick-Setting
(CQS) Slurry
USAGE RECOMMENDATIONS
The information contained herein is presented in good faith and believed to be accurate, however, ArrMaz Products, LP assumes no responsibility or liability for the information provided. ArrMaz Products, LP further makes no representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature with respect to the information or the product(s) to which the information refers.
To request additional product information, contact your regional Road Science representative. You can also contact us at
+1-918-960-3800 or [email protected], or visit our website at www.roadscience.net.
Handle ArrTekk 1295 in accordance with Safety Data Sheet. Avoid contamination with other materials. Do not store product in excess of 160 °F (71 °C) for prolonged periods. Recommended handling temperature range is 120-160 °F (50-71 °C).
TECHNICAL SUPPORT
HANDLING AND STORAGE
PHYSICAL CHARACTERISTICS
ArrTekk 1295 is available in North America only.
ArrTekk 1295 is available for shipment in packaged quantities and available in 275 gal/1,000 L IBC totes (2,100 lb/952.5 kg net weight) and 55 gal/208 L metal drums (420 lb/190.5 kg net weight).
AVAILABILITY
Property Description
Appearance, 77 °F (25 °C) Dark Liquid
Odor Ammoniacal
Density, 120 °F (50 °C) 8.3 lb/gal (1.0 kg/l)*
Viscosity, 120 °F (50 °C) 1,050 cP*
TSCA Inventory Listed
C.A.S. Number Proprietary
*The density and viscosity data reported are typical and not specifi cations.
Typical ranges for density values are ± 2%.
Typical ranges for viscosity values are ± 20%.
Percentages are by weight of emulsion (bwe).
Typical total residue content for micro-surfacing emulsion is 62-65%.
Typical total residue content for slurry emulsion is 60-62%.
Typical FormulationArrTekk 1295
% bweSBR or natural latex
% bweHydrochloric Acid
Micro-Surfacing 1.00-2.00% 3.0-3.5% To soap pH of 1.2-2.0
CQS Slurry 1.50-2.25% 0.0-3.0% To soap pH of 1.2-2.0
lb/gal
Temperature (°F)
8.08.18.28.38.48.5
75 150100 125 175
6502 South Yale Avenue, Suite 100, Tulsa, OK 74136
