SeriesSeriesCX50CX50DIESEL & GASOLINE FORKLIFT TRUCKSDIESEL & GASOLINE FORKLIFT TRUCKSEPA Tier 3 / EU Stage 3A Emission Compliant
3.5 / 4.0 4.5 / 5.0 ton
EPA Tier 3 / EU Stage IIIA Emission CompliantEPA Tier 3 / EU Stage IIIA Emission Compliant
www.Komatsu.com Printed in Japan 1012-2-01shi
Form No. BR-CX50emi-002 Materials and specifications are subject to change without noticeis a trademark of Komatsu Ltd. Japan
32
1st year 4th year 8th year2nd year
NEW CX50
Previous
Previous NEW CX50
Low fuel consumption and low environmental impact are enabled by elimination of excess combustion and the use of the combined technologies of the high pressure common rail system, electronic control system, new combustion system and air to air charge air cooling system.
An electronic controlled engine with a 3-way catalytic system ensures a clean workplace.
The Hydraulic load is automatically detected and only the appropriate amount of oil is supplied via a variable displacement pump. This system eliminates the loss of hydraulic oil and reduces the engine load.
Fixed amount of oil is supplied from the gear pump and excess oil is returned to the hydraulic oil tank. This resulted in increased engine load.Komatsu tested data, comparison with FD50A-8 model.
The results may vary depending on conditions.
Previous hydraulic system
Closed-center Load Sensing System
Hydraulicoil tank
Excess Oil
Controlvalve
Engine
Gear pump
Heavily Loaded
� Total operating cost (*Image)
� Running cost (Accumulated costs for 8 years)
SAA4D95LE-5-ADisplacement:3,260 cm3
Rated Output:59.7 kW @ 2,400 min-1 Maximum Torque:321 Nm @ 1,600 min-1
EBT-TB45-1A*Displacement:4,478 cm3
Rated Output:62.5 kW @ 2,400 min-1
Maximum Torque:272 Nm @ 1,600 min-1
* EBT-TB45-1A for Gasoline.
Komatsu tested data, Comparison with FD50A-8 model.Operation hours: 5 h/day, 25 days/month (Total: Approx. 1500 h/year),Maintenance intervals to manufacturer’s recommendation.Cost calculation is based on Japanese market price.The results may vary depending on conditions.
CLSS
Hydraulicoil tank
Controlvalve
Engine
No Excess Oil
Lightly Loaded
Variable displacement pump
Previous NEW CX50
Komatsu tested data, Comparison with FD50A-8 model.The CO2 emission coefficient is given in the Common Guidelines of the Japanese METI and MLIT (April 2006).The results may vary depending on conditions.
Assuming FD50A-8 as 100%;
�Fuel costs
�Brake maintenance costs
�Engine oil costs
CO2
32,600 kg-CO2
CO2
26,100 kg-CO2
The "CLSS" contributes to Low Fuel Consumption and High Productivity
An Advanced Diesel Engine conforms to the Latest Emission Regulations
Gasoline Engine with a 3-Way Catalytic System
No loss of hydraulic oil results in;Smooth operation of attachments
Lifting becomes possible at low engine RPM
Fuel Consumption
Max. 20% saving
Total operating cost
Approx. 14% saving (8 years)
Annual CO2 emissions
About 6.5 tons reduction
In order to minimize hydraulic loss and reduce the engine load, the new CX50 Series adopts the CLSS hydraulic system, a proven technology of Komatsu construction machines. The compact 3.3-liter engine features superior performance and achieves up to 20% less fuel consumption.
"Reducing Total Operating Costs" withKomatsu Innovative Technologies
An optimum engine achieves low fuel consumption and high performance.
A fully electronically controlled engine with a 3-way catalytic system conforms to the latest emission regulations.
The fusion of advanced engines and Komatsu’s unique hydraulic system enables the new CX50 series to achieve a significant reduction in the total operation costs and facilitates superior work performance. Our innovative machines challenge the conventional concept of the forklift.
Diesel Engine Truck
Gasoline Engine Truck
Komatsu's Hydraulic System and the NEW Diesel Engine reduce the Fuel Consumption
The diesel models feature the SAA4D95LE-5-A engine in combination with the efficient CLSS hydraulic system, enabling them to reduce annual CO2 emissions by about 6.5 tons.
The Advanced Technology offers Reduced CO2 Emissions (Diesel)
The sealed wet disc brakes can withstand about 10,000* hours operation without maintenance and eliminating frequent brake shoes replacements. The engine oil replacement interval has been extended for 300 hours, which reduces oil costs. The reduced maintenance costs and significant fuel saving provide a total operating cost reduction of about 14% over eight years of usage.Komatsu genuine engine oil is recommended.
Greatly Reduced Total Operating Costs (Diesel)
Diesel Engine FD50A-10
Diesel Engine FD50A-10
Diesel Engine FD50A-10
EPA and CARB Tier 2 Emission Compliant
*A periodical check and oil replacement are necessary.
KOMATSUONLY
KOMATSUONLY
KOMATSUONLY
KOMATSUONLY
max.48% saving
max.36% saving
max.20% saving
EPA Tier 3 / EU Stage IIIA Emission Compliant
54
Superior "Productivity" and "Reliability" satisfy demanding operations
Durable Wet Disc Brakes to withstand Severe Conditions
�Traveling Speed (Unloaded)
25.0 km/h 24.5 km/h
The wet disc brake is sealed with oil to block dust penetration, providing durable, water resistant and fade resistant characteristics. Smooth, stable braking provides “Productivity” and “Reliability” in demanding operation.
Excellent Durability for Demanding Work
The oil in the wet disc brake system is circulated through the brake oil cooler. This mechanism ensures stable braking under a heavy work load and prevents deterioration of the braking force due to raised oil temperatures.
Komatsu's unique cushion valve enables a controlled braking force that precisely reflects the pressure on the brake pedal. The braking behavior is thus improved.
� Steady breaking is always achieved.� Overheating of the brakes is prevented.� Rough stopping is prevented when braking.� Downtime and maintenance costs are reduced.
Reduced engine RPM in the following cases:
Fine adjustment of fork height
Lifting fork tips before starting
Fine adjustment for side shifting
The CLSS enables advantages such as:
Smooth traveling during hydraulic operation
Superior productivity is also featured when fitted with attachments
Fuel consumption reduction up to 20% (Diesel)
The high rigidity mast, frame, front and rear axles ensure outstanding reliability even when performing heavy-duty work.
Rugged Design with High Rigidity
The main hydraulic pipe connectors are face-sealed using O-rings. Waterproof connectors are provided to the main harnesses and the system controller in order to provide higher resistance to water and dust. Hydraulic and electrical piping systems are in separate configurations to improve the reliability and servicing.
Improved Reliabilities for the Hydraulic and Electrical Systems
The electronic engine controls upgrade the performance of the engine protection (fail-safe functions).
Engine Protection for Maintaining the Engine in Top Condition
The compact 5.0 ton model features a shorter wheelbase and swift mobility while maintaining the power and speed capable of achieving high productivity.
The Compact 5.0 ton model
[Mast]A heavy mast rail profile for excellent rigidity.
[Frame]Increased thickness of the counterweight mounting section.
[Front axle]The proven design of the Komatsu wheel loaders is adopted.
[Rear axle]The durability of the Power Steering cylinders is improved.
The FHPS (Fully Hydrostatic Power Steering) mechanism facilitates fully stationary steering as well as switchback operations using the small diameter steering wheel. The system has a superior response capability so that the operator can pick up or place cargo flexibly even in a narrow space. In addition, steering knob synchronizer function is available.
Fully Hydrostatic Power Steering for Superb Maneuver
The CLSS makes it possible to lift the load for fine height adjustment without increasing the engine speed.
The CLSS enables Lifting at Low Engine RPMsThe diesel models adopt a compact 3.3-liter engine with the advanced CLSS hydraulic system to achieve high productivity and a first class cycle time. The gasoline engine model also achieves a superior cycle.
First-class Cycle Time
�Lifting Speed (Loaded)
470 mm/s 440 mm/sDiesel Engine FD50A-10
Diesel Engine FD50A-10 Gasoline Engine FG50A-10
Gasoline Engine FG50A-10
A Cooling System to achieve Increased Braking Stability
A Cushion Valve improves the Brake Feeling
First-class Productivity is achieved
Oil pump
Wet disc brake Brake oil cooler
Komatsu tested data, Comparison with FD50A-8 model.The results may vary depending on conditions.
The NEW CX50 Series achieves high productivity equivalent to the previous CX Series.
165 mm/s
(FD40-10, Unloaded)
NEW CX50Previous
Impossibleto lift
Diesel Engine FD50A-10
KOMATSUONLY
KOMATSUONLY
NEW CX50Displacement
3.3R
PreviousDisplacement
5.9R
Cycle time
Fuel consumption
Displacement Lifting Speed
Length:4405 mm
Height:2250 mm
� Trouble diagnosis:Engine malfunctions are automatically detected and an alarm lamp blinks.
� Overheating prevention (Diesel):The engine output and RPMs are reduced when the coolant temperature is high.
� Automatic engine warm-up (Diesel):The RPMs are accelerated to warm up the engine at low temperatures.
� Automatic air pre-heating (Diesel):The engine is automatically pre-heated when starting it at low temperatures.
Engine failure indicator
Careful Design Facilitates Inspection and Servicing
Secure Operation Controls Improve Operator Work Efficiency
6 7
KOMATSUONLY
KOMATSUONLY
KOMATSUONLY
KOMATSUONLY
Fuse and relay boxes are arranged in the same location
Fuel main filter
*The traveling interlocking function only disengages traction and does not automatically apply the brakes.* Operator Presence Sensing system: ISO3691-1 compliant
�Power train floatingThe engine and transmission are isolated from the frame.
�Suspension cabThe entire cab is isolated from the frame.
KOMATSUONLY
KOMATSUONLY
KOMATSUONLY
KOMATSUONLY
• Six-step reclining backrest
• 170 mm slide distance 170 mm slide distance backward and forward
• Seat cushion adjustment dialadjustment dial
• The retractable seat belt
• Six-step reclining backrest
• 170 mm slide distance backward and forward
• Seat cushion adjustment dial
• The retractable seat belt
Neutral indicator for at-a-glance information
Exhaust outlet
A double action type brake lever prevents mishandling
Steering wheel diameter: 300 mmFinger-tip operation with the electric F/R lever
The Operator Presence Sensing system incorporates a Lifting/Traveling interlocking function. This is a safety function for disabling traveling and lifting mechanisms when the operator is not correctly occupying the seat. An alarm buzzer sounds if the operator leaves the seat while traveling.
"Operator Presence Sensing system"
A Wide Angle Center Mirror enables an Easy Rearview
Parking Brake Alarm
ISO-Compliant Enhanced Overhead Guard for Operator's Protection
A Safety Mechanism that prevents starting the engine unless the brake pedal is pressed
The engine cannot be started unless the F-R switch is in the neutral position.
A Neutral Start Function for Preventing a Sudden Start
Secure Lever Controls with Minimum Movement
Use of a smaller steering wheel and redesign of the dashboard have improved the visibility of the bottom of the fork, thus further facilitating the lifting operation.
A Smaller Steering Wheel Permits Widened Front Visibility
Komatsu’s unique cushion valve enables control of the braking force in proportion to the pressure on the brake pedal and improves the brake feeling.
Improved Brake Feeling
The low-noise design of the engine and the fully sealed floor reduce offending noise volumes during operation.
The Low Noise Design
Smooth Getting On/Off
The 3-way catalytic system purifies the nitrogen oxide (NOx), hydrocarbons (HC) and carbon monoxide (CO) emissions.
Clean Exhaust Air with a 3-Way Catalytic System (Gasoline)
Two counterweight air outlets are provided on the left and right sides and an exhaust pipe outlet is provided at a lower position so that the operator is not exposed to hot air from radiator or to exhaust gasses when reversing.
Comfortable Reversing by Preventing Exposure to Hot Air/Exhaust Gas
The deluxe suspension seat features improved vibration resistance and reduces the burden on the body.
Suspension Seat for Improved Comfort at Work
A unique dual vibration cushioning mechanism reduces vibrations in the compartment, steering wheel, control levers and the mast. Any vibrations transmitted from the engine or road surface are quickly absorbed. The mechanism is friendly to both operator and load.
Dual Floating Structure Reduces Vibrations
Control lever with an excellent hand fitting profile
Wide Opening Engine Hood with a Lock for Easy Servicing
A fully-opening floor plate.
Filter Layout Optimization for Improved Serviceability
Easy Radiator Cleaning
Advanced Design in Pursuit of "Safety and Comfort"
Effective Safety Mechanisms
Comfortable & Fatigue-Free Operation Even Over Long-Hour Operation
Engine hood locking provides safety servicing
Lifting interlock lamp on the control panel
When the operator leaves the seat,Operator Presence Sensing system is activated
Improved design of engine hood and step
Enlarged assist grip
Fuel pre-filter
Engine oil filter
8 9
�Model
�Compact modelThis model is designed specifically for operating in restricted spaces. The load center is 500 mm.
�Standard modelThis model is designed to perform a broad range of general-purpose applications. The load center is 600 mm.
�: Standard �: Option –: N/A
CLSS (Closed-center Load Sensing System)Wet disc brake
EPA Tier 3/EU Stage IIIA compliant Diesel engineEPA Tier 2 compliant Gasoline engineElectronic engine control systemHeavy duty High Pressure Common Rail systemNew combustion systemAir to air charge air cooling systemOverheat prevention functionAuto engine warm-up functionAuto air pre-heat function3-way catalytic systemLarge capacity radiatorDual floating structureNew operator's seat with suspensionSmall diameter steering wheelTiltable steering columnElectric forward/reverse leverCombination switch (turn signal light & light switch)Indicator auto-return mechanismFull-open stepPaper binder at engine hoodGlove box at dashboardMeter panelHourmeter (6-digit)Engine cooling water temperature gaugeTorque converter oil temperature gaugeFuel gaugeLifting interlock lampEngine oil pressure warning lampCharge warning lampNeutral indicatorFailure indicatorEngine failure indicatorBrake fluid pressure warning buzzerAir cleaner element warning lampFuel level warning lampCooling water level warning lampBattery electrolyte level warning lampGlow indicatorLarge capacity alternatorQuick auto glow systemNeutral start functionAuto fuseLow maintenance batteryEngine key stop functionHalogen headlightRear combination lightBack-up buzzerOperator Presence Sensing systemSedimenter with priming pumpCyclone air cleaner (double element)Parking brake with release buttonFully hydrostatic power steeringSteering knob synchronizer functionNon-asbestos parking brake liningsKey-off lift lockFloor matAssist gripOverhead guard with front/rear conduitsWide angle center mirrorRear view mirrors (pair)Full shield solid-state engine hoodEasy-removable floor panelEasy-removable radiator coverEngine hood lockRadiator reservoir tankResin dashboard coverJacking points
Engine Diesel�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
CX50 SeriesGasoline/ LPG
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�Major equipment
�Optional Specification Truck �Attachments
�Options
�Mast
En
gin
e-re
late
dTr
avel
ing
-rel
ated
Met
ers
Ind
icat
ors
Ele
ctri
c co
mp
on
ents
Mec
han
ism
Ext
erio
r
� LPG specification truckKomatsu offers both single fuel (LPG) and dual fuel systems (LPG/Gasoline) for the LPG Specification truck.
� Side shifterThe fork may be shifted sideways together with its backrest, both to the right and to the left.
� Fork positionerThe operator is able to adjust the fork spread width from the operator's seat.
� Hinged forkThe fork tilts up/down using its hinge as a fulcrum.
� Load stabilizerThe load is securely held from the top by the pressure plate of the load stabilizer.
� Bale clampThis attachment is recommended for handling packed pulp or raw cotton. The bale is efficiently held from both sides by the bale clamps.
� Fork clampThis attachment is effective for handling packed cotton and rough textile loads by grabbing them firmly from both sides.
� Block clampThis attachment can pick up concrete blocks without using pallets.
� Rotating forkUsed together with the fork inserted container, this attachment is used for transporting items such as powder, fluids, etc. The fork is rotated in order to discharge the load.
� Roll clampRolls of paper or cylindrical objects are safely and securely handled by this attachment. It is possible to rotate the clamped load through 360 degrees.
� 2-stage free view mastThe mast enables a wide view with excellent forward visibility.
� 2-stage full free view mastThis is ideal for sites with height limitations, where the large free lift is required.
� 3-stage full free view mastThe mast extends in three stages and high level loading is easily performed.
Engine & power train related� Extra fuel filters� Pre-cleaner� Spark arrester� Upward exhaust muffler� Radiator screen� Right forward/reverse lever� Automatic transmission (4.5 & 5.0 t)� LPG swing down bracket (LPG)
Exterior� Canvas cabin� Steel cabin� Heater� Tilt cylinder boots� Power steering cylinder protector plate� Fuel cap with key� Seat heater� Front glass with wiper� Rear view mirrors (pair)� Resin overhead guard cover� Fire extinguisher
Electrical equipment� Back-up chime� Mast mount type head lights� Rear working light� Yellow strobe light � Red strobe light
Meters & gauges� Air cleaner element warning lamp� Fuel level warning lamp� Cooling water level warning lamp� Battery electrolyte level warning lamp� Speedometer with alarm� Load checker� Mast tilt angle gauge� Individual key switch
Tyre-related� Elastic cushion tyre� Color non-marking tyre� Double front tyre
Upward exhaust muffler Front glass with wiper
Steel cabin
10 11
CX50 Series Specifications1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.6
3.7
4.1
4.2
4.3
4.4
4.5
4.7
4.19
4.20
4.21
4.22
4.23
4.24
4.31
4.32
4.33
4.34
4.35
5.1
5.2
5.3
5.6
5.8
5.10
5.11
5.12
6.4
7.1
7.2
7.3
7.3.1
7.4
7.6
8.2
8.2.1
8.7
Model Manufacturer's Designation
Power Type Electric, Diesel, Gasoline, LPG, Cable
Operation Type
Rated Capacity Q Rated Capacity kg
Load Center c Rated Load Center mm
Load Distance x Front Axle Center to Fork Face mm
Wheelbase y mm
Service Weight kg
LoadedFront kg
Axle LoadingRear kg
UnloadedFront kg
Rear kg
Tyre Type
Tyre SizeFront
Rear
Number of Wheel Front/Rear (x=driven)
Tread, Front b10 mm
Tread, Rear b11 mm
Tilting Angle � � � Forward/Backward degree
Mast Height, Lowered h1 2-stage Mast mm
Std. Free Lift h2 2-stage Std. Mast, from Ground mm
Std. Lift Height h3 2-stage Std. Mast, from Ground mm
Mast Height, Extended h4 2-stage Std. Mast mm
Height, Overhead Guard h6 mm
Length, with Std. Forks L1 mm
Length, to Fork Face L2 mm
Width, at Tyre b1 Single mm
Forks s/e/l Thickness x Width x Length mm
Fork Carriage Class ISO 2328, Type A/B/no
Width, Fork Carriage b3 mm
Ground Clearancem1 Under Mast mm
m2 at Center of Wheelbase mm
Right Angle Stacking AisleAst with L1000 x W1200 pallet mm
Ast with L1200 x W800 pallet mm
Turning Radius Wa mm
Travel Speed (FWD)Loaded, 1st/2nd km/h
Unloaded, 1st/2nd km/h
Lifting SpeedLoaded mm/s
Unloaded mm/s
Lowering SpeedLoaded mm/s
Unloaded mm/s
Max. Drawbar Pull Loaded 1.5 km/h, 3 min rating kN
Max. Gradeability Loaded 1.5 km/h, 3 min rating %
Service Brake Operation/Type
Parking Brake Operation/Control
Steering Type
Battery Voltage/Capacity at 5-hour rating V/Ah
Make
Model
Rated Output, SAE net kW
Rated RPM min-1
Max. Torque, SAE net Nm@min-1
No. of Cylinder/Displacement cm3
Fuel Tank Capacity L
Relief Pressure for Attachment MPa
Hydraulic tank Capacity L
Transmission
FD40ZT-10
Diesel
Sitting
4000
500
540
1800
5735
8575
1160
2260
3475
Pneumatic
250-15-16PR(I)
7.00-12-12PR(I)
2x/2
1115
1120
6/12
2100
155
3000
4130
2210
4025
2955
1350
50 x 150 x 1070
Class3, A
1190
140
175
4190
4320
2580
18.0/-
19.0/-
540
560
500
500
27
30
Foot/Hydraulic
Hand/Mechanical
FHPS
12/64
KOMATSU
SAA4D95LE-5-A
59.7
2400
321@1600
4-3260
76
20.6
55
TORQFLOW
FD35T-10
Diesel
Sitting
3500
600
575
2000
5790
8115
1175
2560
3230
Pneumatic
8.25-15-12PR(I)
7.00-12-12PR(I)
2x/2
1115
1120
6/12
2105
155
3000
4130
2250
4155
3085
1350
55 x 150 x 1070
Class3, A
1190
145
225
4375
4505
2730
18.5/-
19.5/-
540
560
500
500
27
28
Foot/Hydraulic
Hand/Mechanical
FHPS
12/64
KOMATSU
SAA4D95LE-5-A
59.7
2400
321@1600
4-3260
98
20.6
72
TORQFLOW
FD40T-10
Diesel
Sitting
4000
600
580
2000
6270
8920
1350
2560
3710
Pneumatic
300-15-18PR(I)
7.00-12-12PR(I)
2x/2
1150
1120
6/12
2105
160
3000
4130
2250
4220
3150
1450
55 x 150 x 1070
Class3, A
1190
145
220
4420
4550
2770
18.0/-
19.0/-
540
560
500
500
27
28
Foot/Hydraulic
Hand/Mechanical
FHPS
12/64
KOMATSU
SAA4D95LE-5-A
59.7
2400
321@1600
4-3260
98
20.6
72
TORQFLOW
FD45T-10
Diesel
Sitting
4500
600
590
2000
6855
9950
1405
2770
4085
Pneumatic
300-15-18PR(I)
7.00-12-14PR(I)
2x/2
1150
1120
6/12
2205
145
3000
4130
2250
4270
3200
1450
55 x 150 x 1070
Class3, A
1190
145
220
4480
4610
2820
14.5/24.0
15.5/25.0
470
480
500
500
33
29
Foot/Hydraulic
Hand/Mechanical
FHPS
12/64
KOMATSU
SAA4D95LE-5-A
59.7
2400
321@1600
4-3260
98
20.6
72
TORQFLOW
FD50AT-10
Diesel
Sitting
5000
600
575
2000
7295
10820
1475
2885
4410
Pneumatic
300-15-18PR(I)
7.00-12-14PR(I)
2x/2
1150
1120
6/12
2205
145
3000
4345
2250
4405
3185
1450
55 x150 x1220
Class4, A
1270
145
220
4645
4645
2850
14.5/24.0
15.5/25.0
470
480
500
500
33
28
Foot/Hydraulic
Hand/Mechanical
FHPS
12/64
KOMATSU
SAA4D95LE-5-A
59.7
2400
321@1600
4-3260
98
20.6
72
TORQFLOW
FG40ZT-10
Gasoline
Sitting
4000
500
540
1800
5685
8530
1155
2215
3470
Pneumatic
250-15-16PR(I)
7.00-12-12PR(I)
2x/2
1115
1120
6/12
2100
155
3000
4130
2210
4025
2955
1350
50 x 150 x 1070
Class3, A
1190
140
175
4190
4320
2580
18.0/-
19.0/-
510
510
500
500
24
28
Foot/Hydraulic
Hand/Mechanical
FHPS
12/38
NISSAN
EBT-TB45-1A*
62.5
2400
272@1600
6-4478
76
20.6
55
TORQFLOW
FG35T-10
Gasoline
Sitting
3500
600
575
2000
5740
8080
1160
2525
3215
Pneumatic
8.25-15-12PR(I)
7.00-12-12PR(I)
2x/2
1115
1120
6/12
2105
155
3000
4130
2250
4155
3085
1350
50 x150 x1070
Class3, A
1190
145
225
4375
4505
2730
18.0/-
19.0/-
510
510
500
500
24
25
Foot/Hydraulic
Hand/Mechanical
FHPS
12/38
NISSAN
EBT-TB45-1A*
62.5
2400
272@1600
6-4478
98
20.6
72
TORQFLOW
FG40T-10
Gasoline
Sitting
4000
600
580
2000
6215
8885
1330
2525
3690
Pneumatic
300-15-18PR(I)
7.00-12-12PR(I)
2x/2
1150
1120
6/12
2105
160
3000
4130
2250
4220
3150
1450
55 x 150 x 1070
Class3, A
1190
145
220
4420
4550
2770
18.0/-
19.0/-
510
510
500
500
24
25
Foot/Hydraulic
Hand/Mechanical
FHPS
12/38
NISSAN
EBT-TB45-1A*
62.5
2400
272@1600
6-4478
98
20.6
72
TORQFLOW
FG45T-10
Gasoline
Sitting
4500
600
590
2000
6800
9915
1385
2735
4065
Pneumatic
300-15-18PR(I)
7.00-12-14PR(I)
2x/2
1150
1120
6/12
2205
145
3000
4130
2250
4270
3200
1450
55 x 150 x 1070
Class3, A
1190
145
220
4480
4610
2820
15.5/23.0
16.5/24.0
440
440
500
500
28
26
Foot/Hydraulic
Hand/Mechanical
FHPS
12/38
NISSAN
EBT-TB45-1A*
62.5
2400
272@1600
6-4478
98
20.6
72
TORQFLOW
FG50AT-10
Gasoline
Sitting
5000
600
575
2000
7240
10785
1455
2850
4390
Pneumatic
300-15-18PR(I)
7.00-12-14PR(I)
2x/2
1150
1120
6/12
2205
145
3000
4345
2250
4405
3185
1450
55 x 150 x 1220
Class4, A
1270
145
220
4645
4645
2850
14.5/23.5
15.5/24.5
440
440
500
500
28
25
Foot/Hydraulic
Hand/Mechanical
FHPS
12/38
NISSAN
EBT-TB45-1A*
62.5
2400
272@1600
6-4478
98
20.6
72
TORQFLOW
Ch
arac
teri
stic
sW
eig
ht
Tyre
sD
imen
sio
ns
Per
form
ance
I.C E
ng
ine
Oth
ers
�Dimensions �Right angle stacking aisle width �Maximum load and overall height of mast by lifting height (2-stage free view mast, single tyre, load center 600 mm/ * load center 500 mm)
�Load capacity curve
model
800
900
1000
1100
1200
1300
1400
800
900
1000
1100
1200
1300
1400
800
900
1000
1100
1200
1300
1400
800
4190
4190
4190
4220
4320
4420
4520
4375
4375
4375
4405
4505
4605
4705
4420
4420
4420
4450
4550
4650
4750
900
4190
4190
4190
4220
4320
4420
4520
4375
4375
4375
4405
4505
4605
4705
4420
4420
4420
4450
4550
4650
4750
1000
4190
4190
4190
4220
4320
4420
4520
4375
4375
4375
4405
4505
4605
4705
4420
4420
4420
4450
4550
4650
4750
1100
4190
4190
4190
4220
4320
4420
4520
4375
4375
4375
4405
4505
4605
4705
4420
4420
4420
4450
4550
4650
4750
1200
4190
4190
4190
4220
4320
4420
4520
4375
4375
4375
4405
4505
4605
4705
4420
4420
4420
4450
4550
4650
4750
1300
4190
4190
4190
4220
4320
4420
4520
4375
4375
4375
4405
4505
4605
4705
4420
4420
4420
4450
4550
4650
4750
1400
4190
4190
4190
4220
4320
4420
4520
4375
4375
4375
4405
4505
4605
4705
4420
4420
4420
4450
4550
4650
4750
FD40ZFG40Z
FD35FG35
FD40FG40
modelmaximumfork height (mm) model
Load capacity (kg) Overall height [Lowered / Extended**] (mm)
3000
3500
4000
4300
4500
4700
5000
5500
6000
800
900
1000
1100
1200
1300
1400
800
900
1000
1100
1200
1300
1400
800
4480
4480
4480
4510
4610
4710
4810
4645
4645
4645
4645
4645
4725
4825
900
4480
4480
4480
4510
4610
4710
4810
4645
4645
4645
4645
4645
4725
4825
1000
4480
4480
4480
4510
4610
4710
4810
4645
4645
4645
4645
4645
4725
4825
1100
4480
4480
4480
4510
4610
4710
4810
4645
4645
4645
4645
4645
4725
4825
1200
4480
4480
4480
4510
4610
4710
4810
4645
4645
4645
4645
4645
4725
4825
1300
4480
4480
4480
4510
4710
4710
4810
4645
4645
4645
4645
4645
4725
4825
1400
4480
4480
4480
4510
4610
4710
4810
4645
4645
4645
4645
4645
4725
4825
FD45FG45
FD50AFG50A
4000
4000
4000
4000
4000
3700
3700
2600
1900
3500
3500
3500
3500
3500
2800
2800
2100
1600
4000
4000
4000
4000
4000
4000
4000
3200
2400
4500
4500
4500
4500
4500
4000
4000
3000
2200
5000
5000
5000
5000
5000
4000
4000
2900
2200
2105/4130
2355/4630
2655/5130
2805/5430
2905/5630
3055/5830
3205/6130
3455/6630
3705/7130
2100/4130
2350/4630
2650/5130
2800/5430
2900/5630
3050/5830
3200/6130
3450/6630
3700/7130
FD(G)40Z* FD(G)40Z*FD(G)35 FD(G)40 FD(G)45 FD(G)50A FD(G)35/40
2205/4130
2455/4630
2755/5130
2905/5430
3005/5630
3155/5830
3305/6130
3555/6630
3805/7130
FD(G)45
2205/4355
2455/4845
2755/5345
2905/5645
3005/5845
3155/6045
3305/6345
3555/6845
3805/7345
�FD(G)40Z �FD(G)35 �FD(G)40 �FD(G)45 �FD(G)50A
FD(G)50
Length ofpallet(mm)
Width of pallet (mm)Length ofpallet(mm)
Width of pallet (mm)
1500
2000
2500
3000
3500
4000
4500
5000
1500
2000
2500
3000
3500
4000
4500
5000
600 800 1000 1200 14001500Load center (mm)
600 800 1000 1200 14001500Load center (mm)
600 800 1000 1200 14001500Load center (mm)
600 800 1000 1200 14001500Load center (mm)
Cap
acity
(kg
)
600500 800 1000 1200 14001500Load center (mm)
b1 b10b3 b11
e
h3
h1
h4
x yl L2
L1
m1 m2
α β
h2 s
h6
Wa
Note*: EBT-TB45-1A for Gasoline, EBT-TB45-2A for Gasoline/LPG, EBT-TB45-3A for LPG specification.
Aisle Width shownin this table are not inclusive any operational clearance.
** With standard load backrest