• OBJECTIVE:– Provide Guidance– Encourage Discussion– Discuss Custom
Assessment of Tailings Management Systems
• THE PRESENTATION:– Focus on Wet-Wash
Extractive Mines– Overview of Tailings
Management Technologies
TAILINGS SYSTEM SELECTION
• BENEFITS TO ATTENDEES:– Broader view of what
solutions are available for Tailings Management
– Improved understanding of the solutions are best used
– Perspective into the sorts of results achievable from each unit process
– Perspective into the Capital and Expenditure issues of each unit process
Slide 2 of 17
PRESENTATION STRUCTURE
1. Tailings System Selection
2. Now and Then - Bridging the Gap:a) Thickenersb) Filter and Pressesc) Alternative Methodsd) Chemicals
3. Summary
Slide 3 of 17
TAILINGS SYSTEM SELECTION
• In general, it costs more in the long run to NOT deal with tailings thoughtfully, from the beginning
• The right investment into the right Tailings Management System will maximise profit over the Life of the Mine
Slide 4 of 17
TAILINGS SYSTEM SELECTION – IN A NUTSHELL
Current Situation
(Profit 1)
Desired Situation
(Profit 2)
Several Solutions
Best Solution
GAP
Slide 5 of 17
BRIDGING THE ‘GAP’
• Every Mine is unique:– Tailings-Site-Business combination
• There is a unique solution for every Mine
Slide 6 of 17
BRIDGING THE GAP
• Capital and Equipment:– Dams/voids/bunds/cells– Tanks– Mobile Equipment
• Loaders, trucks, screens, etc
– Conveyors– Pumps– Piping– Mixers/Agitators– Washery Equipment– Thickeners and Clarifiers– Filters and Presses– Automation– Chemical Equipment– etc
Slide 7 of 17
BRIDGING THE GAP
• Consumables:– Power and Fuel– Labour– Chemicals– Earthmoving– Replacement parts– Maintenance– Technical support– etc
Slide 8 of 17
BRIDGING THE GAP – SPECIFIC TOOLS
• Thickeners
• Filters and Presses (Dewatering)
• Alternative Unit Processes
• Chemical Additives
Slide 9 of 17
THICKENERS – TYPICALS…Quarries typically 2-8% solids (w/w), depending on
fine-sand Recovery
Quarries typically 20-65% solids (w/w)
Clean Process Water
< 0.2% solids (w/w)
Slide 10 of 17
THICKENERS
• The ‘smarts’:– Rake selection and design– Centre-well design– Chemical program selection, design and support
• Poor selection and operation can:– Decrease achievable underflow density– Add to production downtime and
reduced throughput – Reduce the achievable thickener throughput – Increase Opex requirements
Slide 11 of 17
THICKENERS• The use of settling and clarity
aids (flocculants, coagulants):– Critical to most modern
thickener designs– Reduce capital
requirement/footprint– Add ‘robustness’ to operation– Allows for a smaller water
circuit– Improved water quality
Flocculant Dose
Unit Area
Slide 12 of 17
FILTERS AND PRESSES (DEWATERING)
• Mechanical Pressure:– Plate and Frame– Recessed Plate– Belt-Press Filter– Screw Press– Disc Press– Roll Press– Tube Press
• Positive Fluid Pressure:– Horizontal Plate– Pressure Leaf– Tubular Filters– Centrifugal
Discharge
Slide 13 of 17
FILTERS AND PRESSES (DEWATERING)
• Negative Fluid Pressure (Vacuum):– Rotary Drum– Rotary Disc– Horizontal Table– Scroll Discharge– Pan Filter– Tilting Pan Filter– Horizontal Belt-Filter
Slide 14 of 17
ALTERNATIVE THICKENING AND DEWATERING PROCESSES
• Centrifugation
• Chemical-Only In-Line Tailings Stacking
• Cyclonic Separation
Slide 15 of 17
FILTERS, PRESSES AND ALTERNATIVE METHODS
• Chemical Treatment:– Most filter/press
applications benefit from some sort of chemical modification of the feed slurry
– Wide range of specialty chemical programs available
– Involve your chemical supplier in the Tailings System evaluation process
Treated slurry on the gravity drainage zone of a belt-press application at a quarry
Slide 16 of 17
FINAL SUMMARY• A general rule:
– It takes a certain amount of something to do anything– What you don’t put in as capital, needs to be put in as
consumables– What you don’t put in as consumables need to be put
in as space and time• Know where you are• Know where you want to be and what it will
mean to you• There are many Tools to get you where you want
to be• Understand (quantify) the value of where you
want to beSlide 17 of 17