1 AN1600 F1 Network Storage System Quick Specification Product Overview Acer AN1600 F1 storage system is a cost-effective storage solution, powered by Microsoft Windows Storage Server offering an easy way for storage centralization, file sharing, data protection, and remote access. Processors and chipset 2 x Intel ® Xeon ® E5620 processors (2.4 GHz, 12 MB L3 cache, 5.86 GT/s, DDR3-1066, 80 W, HT) Intel ® 5520 Chipset Memory Type DDR3-1333 Registered (RDIMM) with ECC capabilities Maximum memory by O/S 32 GB # of DIMM sockets 12 Minimum (standard) memory on system 6 GB (2 GB x 3) Network controller Integrated Intel ® 82576EB dual-port Gigabit Ethernet controller Storage 1 Maximum capacity 1) Up to 12 x 3.5" Hot pluggable SAS/SATA HDD capacity 2) Up to 24 TB raw internal SATA 3) Up to 7.2 TB raw internal SAS Minimum capacity External storage 600 GB (300 GB x 2) internal SAS HDD Optional 2 Storage controller 3 LSI SAS MegaRAID SAS PCIe 2.0 x16 9260-16i with 16-internal ports, 512 MB, supporting RAID 0/1/10/5/50/6/60 (default bundle in system) Expansion slots Seven PCI-Express slots • Two PCI-Express Gen 2.0 x8 slots (in x4 connector; left) • One PCI-Express Gen 2.0 x16 slot (in x8 connector left) • Three PCI-Express Gen 2.0 x8 slots (in x4 connector; right*) • One Acer Flex I/O (PCIe Generation 2.0 x8 connector (left) *Right hand side PCI-Express space has limitation for low-profile card, length within 5.6” Operating System Microsoft ® Windows ® Storage Server 2008 R2, Standard x64 edition Management • Acer Smart Console • Acer Smart Server Manager • iBMC management controller, supporting base board management and KVM-over-IP • LSI MSM (MegaRAID Storage Manager) on-line utility is the OS level utility for data volume RAID configuration • LSI WebConsole utility is a ROM-based utility provided by HBA FW for data volume RAID configuration • Windows Disk Management is OS built-in feature on Windows Storage Server 2008 R2 • Microsoft Windows Storage Server Administration Tools Deployment/serviceability • BIOS Update Tool • IPMI Firmware Update Tool Input/output interface Front • Power button • HDD activity indicator LED • PSU failure LED • Power indicator LED • Two LAN activity LEDs (LAN1, LAN2) • System status/fault indicator LED 1. Storage capacity 2 External storage is available through fiber channel connection for additional storage devices 3. 16 ports RAID card is now available starting from January, 2011
Transcript
1
AN1600 F1 Network Storage System Quick Specification
Product Overview
Acer AN1600 F1 storage system is a cost-effective storage solution, powered by Microsoft Windows Storage Server offering an easy way for storage centralization, file sharing, data protection, and remote access.
Memory Type DDR3-1333 Registered (RDIMM) with ECC capabilities
Maximum memory by O/S 32 GB
# of DIMM sockets 12
Minimum (standard) memory on system
6 GB (2 GB x 3)
Network controller Integrated Intel
® 82576EB dual-port Gigabit Ethernet controller
Storage1 Maximum capacity 1) Up to 12 x 3.5" Hot pluggable SAS/SATA HDD capacity
2) Up to 24 TB raw internal SATA 3) Up to 7.2 TB raw internal SAS
Minimum capacity External storage
600 GB (300 GB x 2) internal SAS HDD Optional
2
Storage controller3 LSI SAS MegaRAID SAS PCIe 2.0 x16 9260-16i with 16-internal ports, 512 MB, supporting RAID 0/1/10/5/50/6/60 (default bundle in system)
Expansion slots Seven PCI-Express slots
• Two PCI-Express Gen 2.0 x8 slots (in x4 connector; left)
• One PCI-Express Gen 2.0 x16 slot (in x8 connector left) • Three PCI-Express Gen 2.0 x8 slots (in x4 connector; right*)
• One Acer Flex I/O (PCIe Generation 2.0 x8 connector (left) *Right hand side PCI-Express space has limitation for low-profile card, length within 5.6”
Operating System Microsoft
® Windows
® Storage Server 2008 R2, Standard x64 edition
Management • Acer Smart Console • Acer Smart Server Manager
• iBMC management controller, supporting base board management and KVM-over-IP
• LSI MSM (MegaRAID Storage Manager) on-line utility is the OS level utility for data volume RAID configuration • LSI WebConsole utility is a ROM-based utility provided by HBA FW for data volume RAID configuration
• Windows Disk Management is OS built-in feature on Windows Storage Server 2008 R2
• Microsoft Windows Storage Server Administration Tools
Deployment/serviceability
• BIOS Update Tool • IPMI Firmware Update Tool
Input/output interface Front
• Power button
• HDD activity indicator LED • PSU failure LED
• Power indicator LED
• Two LAN activity LEDs (LAN1, LAN2) • System status/fault indicator LED
1. Storage capacity 2 External storage is available through fiber channel connection for additional storage devices
3. 16 ports RAID card is now available starting from January, 2011
2
AN1600 F1 Network Storage System Quick Specification
Rear • PS/2 Mouse port • Two USB 2.0 ports
• Serial port • Video port
• Two Gigabit LAN ports (RJ-45) • ID LED button
• Management port (RJ-45) (dedicate management NIC)
Chassis/form factor 2U rack optimized up to 12 hot-pluggable 3.5" SAS/SATA HDDs
Power supply 2 x 720 W 80 PLUS Gold level efficiency power supply (redundant/ hot-plug)
Regulatory compliance standards EMC
CE (Class A)
Safety CB GS
Dimensions 438.4(w) x 705 (D) x 88.1 (H) mm (17.26 x 27.76 x 3.47 inches)
Form factor 2U rack optimized
Product Overview
3
AN1600 F1 Network Storage System Quick Specification
1. PCIe/Flex I/O expansion – 7 slots in total 2. Riser card supporting PCIe, PCI (LAN card), and Flex I/O expansion 3. Intel
® Xeon
® processor 5600 series
4. 12 DDR3 dual-channel DIMMs (6 per CPU), ECC support4
5. 2 x 720W 80 PLUS Gold level efficient PSU (1+1 redundant/hot pluggable) 6. 3+1 redundant system fans 7. SAS/SATA backplane 8. Front status indicators and power button 9. 12 hot-pluggable 3.5” SAS/SATA HDDs
4 Maximum memory capacity is 32 GB per system by Operating System.
4
AN1600 F1 Network Storage System Quick Specification
What’s New
1. Windows Storage Server 2008 R2
� Friendly User Interface Customization � Standard-alone NAS OOBE
� Single Instance Storage � Performance improvement � SCOM management pack support
� iSCI software version 3.3 � Performance improvement � SCOM management pack support
� Bitlocker � BranchCache-Hosted Cache support � Additional language support
2. 16 port RAID card support
Pre-configured skus1 Processor Memory Type HDD RAID HBA
1.16-port 6 Gb/s SAS RAID adapter is now available for FG SKU starting from January, 2011
Features and Benefits Unified storage acting as file server Centralized information keeper in network with Microsoft based storage
operating system to manage, protect, and expand.
Efficient operations Works together with Acer Smart Setup and Acer Smart Manager for faster installation and setup. Microsoft Management Console user interface from Windows storage operating system enable you to use existing features such as iSCSI and SIS
5 allowing less maintenance and
faster backup.
Expansion as needed and stay in storage industry standards
Leveraging industry HDD standards SAS/SATA standards and extend to external storage through fibre channel connections. Powered by latest Intel processors and DDR3 memory protecting your investment and resources years to come.
SME budget with enterprise storage level features
Designing from server infrastructure by using server processors, industry standard HDDs, interconnections, DDR3 memory, and hot-plug redundant power supply, AN1600 F1 is equipped with enterprise level features such as file de-duplication, snapshots, and distributed file system replication.
5 SIS: Single Instance Storage can recover up to 35% of disk capacity by reducing the number of redundant files.
5
AN1600 F1 Network Storage System Quick Specification
Standard Features Acer Smart Server Manager
• Offers 24-7 monitoring for system health and performance. • Delivering proactive event management features including system event logging, event handling from e-
mail and SNMP Trap (PET) alerting.
• Allowing remote control from KVM and Power control.
• Satisfying management in web-based UI, role-based administration, and automated management scripts.
Acer Smart Console • Web-based management utility to simplify system management with embedded iBMC
• System monitoring and alerting, event handling, remote power control and KVM-over-IP. • Acer Smart Console is OS independent, and offers virtual media through floppy, ODD, and removable
disk.
• Out-of-band (OOB) management regardless OS status.
Acer Recovery Utility • A friendly and an intuitive system recovery utility to return to its original factory state. • Supports over twenty some different languages.
• Wizard step by step guiding through the complete recovery processes.
Acer Resource Kit
Comprehensive system information in one single disk including System drivers, LAN, RAID, and iSCSI Target Client utilities, and User Guide.
GN1600 F1 features Windows Storage Server R2 Operating System
Microsoft® Windows® Storage Server 2008 R2 operating system provides file storage and print server capabilities for client and server computers in your network environment. Storage appliances running Windows Storage Server 2008 R2 can be used in failover clusters, providing high availability storage for application servers and file storage.
Single Instance Storage (SIS) v2 SIS reduces the amount of storage used by data by replacing multiple identical copies with logical links to a single source copy.
File Server Optimization Windows Storage Server 2008 R2 is tuned to provide better performance in a file server role, realizing as much as an 8% performance gain in file system operations.
Remote Administration in Heterogeneous Environments
Remote administration of Windows Storage Server 2008 R2 appliances can be done from Internet Explorer using an ActiveX control, and from non-Microsoft browsers using a Java control.
Print Services Windows Storage Server 2008 R2 offers performance enhancements for the Print Services role.
Distributed File System (DFS) Namespace and Replication
Windows Storage Server 2008 R2 can provide DFS support for file sharing for WANs and satellite offices
Microsoft iSCSI Software Target
Microsoft iSCSI Software Target provides centralized, software-based and hardware-independent iSCSI disk subsystems in storage area networks (SANs). You can use iSCSI Software Target, which includes a Microsoft Management Console (MMC) snap-in, to create iSCSI targets and iSCSI virtual disks. You can then use the Microsoft iSCSI Software Target console to manage all iSCSI targets and virtual disks created using iSCSI Software Target.
Microsoft iSCSI Software Target 3.2 provides the following features:
6
AN1600 F1 Network Storage System Quick Specification
Server Manager Integration
Manage your Microsoft iSCSI Software Target from Server Manager.
Improved CHAP Secret Storage
Microsoft iSCSI Software Target 3.2 uses a more secure and customizable storage method for CHAP secrets.
ERL0 Compliant Connection and session reinstatement is now fully ERL0 compliant.
Microsoft Management Console
Microsoft® Management Console (MMC) is an extensible common presentation service for management
applications. MMC unifies and simplifies day-to-day system management tasks. It hosts tools and displays them as consoles. These tools, consisting of one or more applications, are built with modules called snap-ins. The snap-ins also can include additional extension snap-ins. Microsoft Management Console enables system administrators to create special tools to delegate specific administrative tasks to users or groups. Microsoft provides standard tools with the operating system that perform everyday administrative tasks that users need to accomplish.
Task Orientation The tools being defined to work with MMC are task oriented in nature—they cater to the task being performed rather than merely displaying the raw objects that can be manipulated. Also, because administrators can customize their own tools, using pieces from various vendors, they can create tools that contain only the UI they need to complete their tasks.
Integration The UI for all the management tasks an administrator must perform are collected into a single console. As new applications are added to a computer or network, their administration is integrated into the existing administration common console.
Customization of Consoles Administrators can create custom consoles tailored to their particular management needs. This is useful in enterprise environments that divide administrator groups according to duties. For example, you can create a custom console for software installation and maintenance, another one for scripts administrators, another one for security Group Policy, and so on.
Delegation Administrators can easily modify existing tools to create new tools with reduced functionality and less complex views of the tool namespace, and then give these tools to others. A person who receives such a tool is presented with a simpler, more manageable view of the tasks they are being asked to perform.
Overall Interface Simplification
All tools built for MMC, from Microsoft or third-party software vendors, will have a similar appearance, making it easier for users to use all tools after learning one. Because you can mix and match tools from any vendor, you can use the best tool from each management product category. MMC also enables a single piece of software to provide functionality across the interface in a consistent manner.
Extensibility Developers can extend the base functionality of MMC snap-ins by creating extension snap-ins. This allows software vendors to reuse Microsoft tools without writing a lot of code. Various mechanisms are available for extending snap-ins, including extending the namespace, context menus, toolbars, Property pages, and creating Wizard 97-style pages.
System Specifications
7
AN1600 F1 Network Storage System Quick Specification
Processor Type Two Intel® Xeon
® E5620 DP Quad-Core (2.4 GHz, 12
MB L3 cache, 5.86 GT/s, DDR3-1066, 80 W, HT)
Features � Intel® QuickPath Interconnect up to 5.86 GT/s, each
direction. Per link � Support Intel
® 64 Technology, Enhanced Intel®
SpeedStep Technology, Intel® Simultaneous Multi
Threading, Intel® Virtualization Technology
� Support Registered LV DDR3
Socket Two LGA1366 sockets
NOTE: � For optimum performance, when two processors are installed, both
must be of identical revision, core voltage, and QPI/core speed. When only one processor is installed, it must be in the Processor Socket 1. The other socket must be empty. Processors must be populated in sequential order. Processor Socket 1 must be populated before Processor Socket 2.
� System thermal solution is capable of supporting up to TDP 95W Intel Xeon 5600 EP processors. (include standard, HE)
2. Support memory scrubbing 3. Support Error reduction (BIOS will isolate the faulty DIMM and does
not enable it when system detects the faulty DIMM 4. Event log/monitoring: Single/multi-bit ECC error 5. Mixing of Registered memory and Unbuffered ECC memory is NOT
supported.
Networking
Controller Integrated single dual-port Intel® 82576EB Gigabit
Ethernet Controllers (Dual Port 10/100/1000)
Ports 2 ports
8
AN1600 F1 Network Storage System Quick Specification
Network interface
10Base-T / 100Base-TX / 1000Base-TX
Compatibility � IEEE 802.3 Ethernet interface for 10BASE-T, � IEEE 802.3ab Ethernet interface for 1000BASE-T, � IEEE 802.3u Ethernet interface for 100BASE-TX,
NOTE: 1. The signaling bit rate of PCI Express is 2.5Gbit/s one direction per
lane for Gen 1 and 5.0 Gbit/s one direction per lane for Gen 2. 2. Indicates the number of physical electrical lanes running to a PCIe
®
connector 3. Default bus assignment (in decimal). Inserting cards with PCI™
bridges may alter the actual bus assignment number. 4. Slots are enumerated differently based on the operating system.
Microsoft® operating systems enumerate Device ID by bus starting
from the lowest bus to the highest.
9
AN1600 F1 Network Storage System Quick Specification
Back I/O Panel
� Two PS2 ports � Two USB 2.0 ports � Two RJ45 connectors (Dual Gigabit NIC) with Activity and Link
indicators � One RJ45 (dedicate management NIC) with Activity and Link indicators � One Serial port (DB-9) � One SVGA Video port (DB-15) � System ID LED/Button NOTE: Parallel port is NOT supported
Language Support English Yes
German Yes
French Yes
Italian Yes
Spanish Yes
Chinese (traditional) Yes
10
AN1600 F1 Network Storage System Quick Specification
Technical Specifications Form Factor 2U rack-optimized
Dimensions (W x D x H)
Metric Units (mm) 438.4 x 705 x 88.1 mm
Imperial Units (inch) 17.26 x 27.76 x 3.47 inches
Weight
Maximum
(all processors, memory, hard disk drives, power supplies installed)
38.0 kg (84 lb)
Minimum
(Two processors, two PSU, single memory, no hard disk drive installed)
27.5 kg (60.62 lb)
Front Control Panel � Power button � Power indicator LED � HDD activity indicator LED � Two LAN activity LEDs (LAN1, LAN2) � PSU failure LED � System status/fault indicator LED
Rear I/O bracket � 2 x PS2 ports � 2 x USB 2.0 ports � 1 x Serial port � 2 x RJ45 connectors (Dual Gigabit NIC) with Activity and Link indicators � 1 x RJ45 (dedicate management NIC) with Activity and link indicators � 1 x SVGA Video port (DB-15) � 1 x ID LED button
Storage
On-board SATA Controller
Intel® 82801JR (ICH10R) I/O Controller
Hard disk drive Form factor 3.5”
Type SATA/SAS
Hot-plug Hot-plug
FDD Not support
3.5” SATA hard disk drive • Maximum 24TB (12x 2TB 3.5” SATA
HDD) • Full Function / dummy carrier
Simulaneous drive transfer channels
6 channels
Transfer rate synchronous (maximum theoretical)
3Gb/s per channel
Data transfer method • Non RAID mode • RAID mode
Drive support SAS/SATA
11
AN1600 F1 Network Storage System Quick Specification
Data transfer modes • Legacy model • Combined mode
• Setup through ROM based Array Configuration Utility Installation scripting support
RAID OS support Windows® Storage Server 2008 R2
Hard disk drive bays
3.5” hard disk drive • Maximum: 12 bays
• Hot plug
Interface PS2 Keyboard 1
PS2 Mouse 1
Parallel N/A
Serial port 1 rear side 1 on-board (9-pin connector)
USB 2.0 ports Front USB N/A
Rear USB 2
Internal USB • One Type A USB connector
• Three 2x5 pin Intel®
FPIO USB pin headers (total 5 ports)
Input Requirements (per power supply)
Range line voltage 100~240 VAC
Rated input current 9 A~4A
Rated input frequency 50 to 60 Hz
Rated input power 720W
Power supply • Supplier to propose power budget for PSU spec setting • 720W (100V-240V) gold level 90% high-efficiency power supply.
• Hot plug power supply module (Gold level)
BTU (Maximum) 3276 BTU/hr
Server Power cord 6’ highline (IEC-IEC) power cord
12
AN1600 F1 Network Storage System Quick Specification
System Cooling • Support 10° to 35°C (50° to 95°F) environment • Two CPU heat-sink (2U height) supporting Intel Xeon processors up
to TDP 95W • Support memory full-populated configuration
• Support up to 12*SAS/SATA HDDs
• 3+1 hot plug, redundant system fans with PWM controlled MB
Thermal Feature
• System fans support PWM fan speed control with SMART FAN feature
• Common used for Acer 2U server platforms
Compliance • Windows Hardware Logo Program Requirements
• ACPI 3.0b • PCI-E 2.0 for Gen2
• PXE 2.1
• WOL • SMBIOS 2.6.1
• IPMI 2.0
System inlet temperature
Operating 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft)
Non-operating -40° to 70°C (-40° to 158°F).
Relative humidity (non-condensing)
Operating 8 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing
Non-operating 5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing
Acoustic noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779
Idle
LWAd 5.1BA
LpAm 40dBA
Operating
LWAd 5.7BA
LpAm 44dBA
EMI Considerations � Adequate EMC shielding to meet Class A of EMC requirements (FCC, CE, BSMI)
� Chassis seams have features to enhance grounding � Motherboard mounting features provides grounding � Normative standards : CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1
Emissions FCC rating Class A
13
AN1600 F1 Network Storage System Quick Specification
Classification (EMC)
Normative standards EN 55022 Class A, EN 61000-3-2/-
3-3, CISPR 22 Class A
NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements
Regulatory Compliant Standard
EMC6 CE (Class A)
Safety6 CB and GS
6 Compliance availability varies by region and country.
14
AN1600 F1 Network Storage System Quick Specification
RAID Volume and Setup Layout Default 2 HDDs RAID Volume and system partition
Default 8 HDDs RAID Volume and system partition
Default 12 HDDs RAID Volume and system partition
15
AN1600 F1 Network Storage System Quick Specification
Memory Specifications Each processor has three memory channels (1, 2 and 3) and each channel has two slots - A (PxDIMM1A, 2A, 3A in blue) and B (PxDIMM1B, 2B, 3B in black). So, the system has a total of twelve memory slots. The memory slots support DDR3-1333 registered/unbuffered ECC memory modules, but it’s not allowed to mix RDIMM and UDIMM in a system. For all memory modes, the slot A in each channel should be populated first. If slot A is empty, slot B can’t be used. NOTE: � When you are using a single-processor server, you should install the memory module into P1DIMM1A to P1DIMM3B slots when CPU is
installed in CPU1 socket. � The P2DIMM1A to P2DIMM3B slots are enabled when a second CPU is installed on the CPU2 socket.
For the system to function, DIMM modules must be installed following the slot sequence listed below. DIMM module of the same type, size and manufacturer must be installed in the same colored DIMM slots.
Independent mode: Single processor configuration (subjected to change if any update)
AN1600 F1 Network Storage System Quick Specification
Mirroring or Lockstep mode:
� Mirroring mode & Lockstep mode need the channel 1 & channel 2 with identical DIMMs. 1A and 2A should be the same type, size and manufacturer. 1B and 2B memory should be the same type, size and manufacturer.
� Channel 3 is no function in this mode. � Same rule is applied to the CPU2 memory channel 1, 2, 3. � For mirroring mode, the memory contains a primary image and a copy of the primary image. Therefore, the
effective size of memory is reduced by at least one-half.
Single processor configuration Total
Physical Memory
DIMM 1B
DIMM 1A
DIMM 2B
DIMM 2A
DIMM 3B
DIMM 3A
4GB 2GB 2GB
8GB 2GB 2GB 2GB 2GB
8GB 4GB 4GB
16GB 4GB 4GB 4GB 4GB
16GB8 8GB 8GB
32GB 8GB 8GB 8GB 8GB
Dual processor configuration
Sparing mode � In this mode, if the system detects degrading memory and did not crash, the data in the failed channel will be
copied to the spare channel. The failed channel is then isolated and the spare channel becomes active. However, any uncorrectable error that happens before the isolation will still cause the system to stop normal operation.
� Channel 3 is the spare channel. Therefore, the effective size will be reduced by one-third. � Follow the population rules described in the independent mode. � Sparing mode requires that all three channels use identical DIMMs. 1A, 2A and 3A should be the same type,
size and manufacturer, likewise for 1B, 2B and 3B. The same rule applies to processor 2.
Single processor configuration Total
Physical Memory
DIMM 1B
DIMM 1A
DIMM 2B
DIMM 2A
DIMM 3B
DIMM 3A
6GB 2GB 2GB 2GB 12GB 2GB 2GB 2GB 2GB 2GB 2GB
8 8
8 GB memory availability varies by region and country. 9 9
8 GB memory availability varies by region and country.
Total Physical Memory
P1DIMM P2DIMM
1B 1A 2B 2A 3B 3A 1B 1A 2B 2A 3B 3A
4GB 2GB 2GB
8GB 2GB 2GB 2GB 2GB
12GB 2GB 2GB 2GB 2GB 2GB 2GB
16GB 2GB 2GB 2GB 2GB 2GB 2GB 2GB 2GB
8GB 4GB 4GB
16GB 4GB 4GB 4GB 4GB
24GB 4GB 4GB 4GB 4GB 4GB 4GB
32GB 4GB 4GB 4GB 4GB 4GB 4GB 4GB 4GB
16GB9 8GB 8GB
32GB 8GB 8GB 8GB 8GB
18
AN1600 F1 Network Storage System Quick Specification
AN1600 F1 Network Storage System Quick Specification
Storage The AN1600 F1 chassis was designed to support twelve 3.5" SAS/SATA hot-swappable hard drives. As a system, ach server board supports the use of three SATA drives. A single SATA backplane works to apply system-based control for power and fan speed functions. RAID setup is limited to a three-drive scheme (RAID cannot be spread across all twelve drives).
Hard Disk Drive Support
Drive Quantity Supported
Bay Supported Required Controller
3.5” SATA/SAS hard drive Up to 12 0 – 11 1*16-port SAS RAID card
NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the host bus adapter (HBA) or controller.
20
AN1600 F1 Network Storage System Quick Specification
Power Specifications
720W Power Supply
Operational Input Voltage Range (Vrms)
100 to 240
Frequency Range (Nominal) (Hz)
60/50
Nominal Input Voltage (Vrms)
100 120 208 200 220 230 240
Max. Rated Output Wattage
720 720 720 720 720 720 720
Nominal Input Current (A rms)
8.46 6.97 3.80 3.87 3.74 3.5 3.29
Max. Rated Input Wattage Rating (Watts)
846.0 836.4 790.4 774.0 822.8 805.0 789.6
Max. Rated VA (Volt-Amp)
837.54 828.03 774.59 758.52 806.34 788.9 773.81
Efficiency (%) at Max. Rated Output Wattage
88.12 89.49 90.95 90.74 91.51 91.92 92.27
Power Factor 0.99 0.99 0.98 0.98 0.98 0.98 0.98
Leakage Current (mA) 0.17 0.19 0.29 0.31 0.35 0.37 0.41
FC HBA Qlogic SANblade® QLE2460 Single Port 4-Gbps Fibre Channel to PCI
Express Host Bus Adapter, 1ch, 4Gb FC HBA, PCI-E x4, Single LC port (w/ both std & low profile bracket)
FC HBA Qlogic SANblade® QLE2462 Dual Port 4-Gbps Fibre Channel to PCI Express
Host Bus Adapter, 2ch, 4Gb FC HBA, PCI-E x4, Dual LC ports
10
Options are subject to change without notice. Please contact authorized Gateway representative for latest available options.
22
AN1600 F1 Network Storage System Quick Specification
Revision History
Date version Note/changes
2009/07/28 1-0-0 First release
2010/12/31 2-0-0 1) Minor wording and format updates
2) Now supported Windows Storage Sever 2008 R2
3) Added Windows Storage Server 2008 R2 features in specification
4) Maximum storage increased to � Up to 24 TB raw internal SATA � Up to 7.2 TB raw internal SAS
5) Added LSI SAS MegaRAID SAS PCIe 2.0 x16 9260-16i with 16-internal ports, 512 MB, supporting RAID 0/1/10/5/50/6/60 (default bundle in system configuration)
6) Removed 1 GB memory support
2011/01/06 2-0-1 1) Added additional 3 skus
2011/11/04 2-0-1 1) New Logo
2) Power Specifications duplicate removed
In a continuing effort to improve the quality of our products, information in this document is subject to change without notice. Images shown are only representations of some of the configurations available for this model. Availability may vary depending on region. Microsoft and Windows are registered trademarks of Microsoft Corporation. Intel, the Intel logo, Pentium, Xeon and Xeon Inside are trademarks of Intel Corporation.
