+ All Categories
Home > Documents > Ananya KAth Khuni 12623

Ananya KAth Khuni 12623

Date post: 12-Jan-2016
Category:
Upload: ananya-kango
View: 311 times
Download: 22 times
Share this document with a friend
Description:
hp vernacular
Popular Tags:
6
Vernacular Architecture of Himachal Pradesh Low Cost Building
Transcript
Page 1: Ananya KAth Khuni 12623

Vernacular Architecture of Himachal Pradesh

Low Cost Building

Page 2: Ananya KAth Khuni 12623

Himachal Pradesh Kath-khuni architecture is made of two local materials: Himalayan slate, a

dark grey-layered stone that absorbs heat and is impermeable to moisture and deodar timber,

a species of mountain cedar, able to withstand exposure to moisture and adjust to climatic

and seismic changes. The wood comprises a floating frame for the building. Wood is milled

into beams. A distinctive feature of Himachal Pradesh wooden buildings is elaborate narrative

carving of the wood. Slate stone is the infill for the wooden frame. The slate is rough cut and

placed in layers without any mortar.

Kath-khuni house forms comprise four primary components: a stone plinth, which creates the

base of the house, wood-and-stone structural walls forming the core of the house with floors

as an insert, cantilevered wooden balconies acting as the second skin to the house and an

overhanging slate tile roof fixed to the wooden framework, which caps the entire structure.

Kath-khuni houses have been made for generations by the cooperative effort of local people.

When necessary the locals employ specialist traditional builders, craftsmen and masons. The

complexity of each house, the decoration and the delineation of space reflect the size of the

family, their wealth, and their connection to local beliefs and their adaptation to the changes

in the society.

Image: Laying of wooden sleepers Image: An example of kath khuni architecture

Image: Bhimalkali Temple Image: Bhimakali Temple

Page 3: Ananya KAth Khuni 12623

Image: Axonometry

Page 4: Ananya KAth Khuni 12623

These houses can be mostly found in the Sutlej Valley of Himchal Pradesh, particularly in the

Kinnaur district. Some other exaples can be seen in Mandi and Kullu districts of the area, but

these are not that well known. The most common example of this particular style would be

the Bhimakali Temple in Sarahan area of Shimla district.

Kath-khuni construction is efficient in this mountainous terrain because stone is close

at hand and rubble provides an easy alternative to slow setting mortar. Until recently

wood was readily available locally and small water powered mills could process the

raw materials. Construction takes place in stages, whenever materials and labour are

available. The local raw materials are not adversely by seasonal changes so you can

work year round. Thin walls can be made for interior spaces thus achieving maximum

height with minimum material. Raw materials are not wasted. Buildings are energy

efficient. These buildings leave a lasting, small footprint.

Sarahan is one of the most beautiful village in Chopal. Sarahan is located at 31.52°N 77.80°E. It has an average elevation of 2,313 metres above from sea level on the Sarahan road. Sarahan is located 26 km from Chopal and 136 km from Shimla.

The temple complex has two parallel buildings, built around a large square courtyard which is open to sky . In order to ensure strength and stability to the structure, the plinth protection has been made of solid stone with massive deodar beams laid horizontally at wide intervals. The uuper part consist of alternating layers of stones and timber.

Image: Bhimakali Temple

Page 5: Ananya KAth Khuni 12623

This historical temple is a multi-storeyed structured building, a fusion of Hindu and Buddhist architecture. The tall tower like structure and unusual roof of the temple dominate the complex. The centuries old temple is now locked and in the newly built temple, the goddess Bhimakali is portrayed as a maiden and as a woman. This temple complex includes other temples such as Narsingh shrine of Bhairon and Lord Raghunath.

The base starts with alternating layers of cedar sleepers and cut stone over it, for every one

layer of wood, there are two layers of stone. After the first floor, the structure changes and

the size of the floor increases to include a walkway on all sides. This structure is completely

made from wood, and many openings are given along the walkways. These “balconies” are

merely galleries from which one can approach the worshipping area inside, where the idol is

kept. On the top of both the temple complexes there is a slate roof which comprises of slates

nailed over wooden planks.

Image: Structural Analysis

Page 6: Ananya KAth Khuni 12623

Doors and the windows are small allowing only one person or one cow to enter at a time. The

interior surface of the structural walls in the living space is finished with wooden planks or

mud. Small openings of doors and windows prevent heat loss. These details keep interiors

cool in summer and warm in winter. Balconies act as a „second skin‟ for the main structure

assisting in maintaining the interior temperature).

___________________________________ . _______________________________________


Recommended