® ®

Anatomy of a Quality Machine

Vibration Reducing Isolated Handle

Noise Reducing Weight Spacers

Slotted-Removable Weights

Dust Containment Kit

Efficient High Speed Motor

®By

American Made

800.557.6822 | www.squarescrub.com1

3450rpm - 1.5hp/120 Volt* Energy Efficient Motor6.9 amp Draw Won’t Overload Circuits and Pop Breakers!

*3450rpm motor available on the EBG-20/C and EBG-28 Models

10 Gauge Powder Coated Steel Frame (EBG-20/C)7 Gauge Powder Coated Steel Frame (EBG-28)

Ideal Pad to Surface Contact

3/4” Solid Steel Axle

Two-Piece Handle with Pin & Retainer (Optional)

Solid Stainless Steel Knob

Safe! ETL/CSA/CE Certified

2

ETL/CSA/CE

Reduced Vibration

Get a Grip

Square Scrub strives to make your day easier. When implementing this latest feature, we considered the impact that vibration makes on your hands and even your body over an extended period of time. A little bit of vibration is to be expected of course, but we thought why not dampen that vibration as much as possible to reduce fatigue and offer you, the user, the ability to keep on working. Whatever project you decide to work on next, know that we have done all we can to make your day easier.

NEW!! High Output Grip Face

Less Cost. Even More Versatile.

Our NEW Grip Face allows any tool to adhere even better to the machine - eliminating slippage. Eliminating the slippage between the pad and the grip face causes less friction between the pad and the plate. This allows more power transfer to the work surface and reduces pad wear. Not only that, some of our products now adhere directly to the new grip face. No driver required*. Who wouldn’t want to save money on drivers?

800.

557.

6822

| w

ww

.squ

ares

crub

.com

3 *Be sure to follow proper recommendations for accessory use. Visit www.squarescrub.com for more information.

Vibration Reducing Isolated Handle

Even/Adaptable WeightAdjust the weight of the machine to suit your application.With Square Scrub, changing from floor type to floor type is easy with our NEW Slotted Removable Weights. Well really, it’s more of a twist on an old favorite. We’ve added the slots to make it even easier to add weights for stone polishing or hardwood floor sanding and remove weights to clean the carpet in the room next door. Our EBG 20/C can adjust to accomodate up to a total weight of 329 lbs. That’s a lot of added prepping power! We’ve even relocated the Base Hose Cuff to allow for ideal weight distribution. Ideal weight distribution = the most even pad to surface contact.

Relocated Base Hose Cuff

IdealWeight

Distribution=

EvenSurface Contact

4

Easy to Remove Slotted Weights

Tile, Granite, Hardwood - even Stone Polishing...Square Scrub embodies Multi-Purpose.!

With over 100 types of pads, plates, screens, papers and diamonds available, there is a tool available to help you tackle virtually every floor type. Got a marble floor in desperate need of some shine? Use our stone care diamonds. Want an easier way to remove all of that carpet glue? The Abrader Plate tears right through it. Even small problems like removing gum from concrete can be solved with Square Scrub. Our 16 Grit Pro Sandpaper works great for that! Wet or Dry, whatever your need, we’ve got the right tool for any job and a machine that can do it all. Now THAT is Versatility2®!

The ULTIMATE Multi-Purpose Tool!

5

® ®

As Easy AsOne.

Easy to Follow MaintenanceInstructions

If you can follow simple, step-by-step instructions, you can service a Square Scrub. Just visit the Square Scrub website for instructional videos and step-by-step intructions at: www.squarescrub.com.

Two.

Three.

Four...

6

Proud to be an American!An American Made product, that is.

We don’t mean to brag, but we’re pretty sure no one else can say that their machines are truly American Made. We can!! The 10 gauge steel used in our frame comes from Arkansas. That same steel is fabricated just a few minutes from our factory where the machines are assembled by hand. The Leeson motor is made in Black River Falls, Wisconsin.We believe in American Made products and the opportunities created by supporting American companies. That is why we make every effort to incorporate components that are made right here in the good old United States of America.

Quality Control

7

Every machine we build is quality tested and inspected. We care about the reputation of American Made products so we strive to build a sturdy, hard-working, solid machine that is

BUILT TO LAST!!

Time IS money. At Square Scrub - we know that. The design of our machine is built on saving you time and affording you opportunities to make more money. So we know that you don’t have time to wait weeks for your machine. That is why we strive to fulfill every machine order within one day of receiving an order. For pads and accessories, we do our best to get them out to you the next day so you can get to work ASAP!

Fast Delivery

American Made800.557.6822 | www.squarescrub.com 8

POINT.SQUEEZE.

GO.Intimidating? Nope.

Let’s face it, some of the machines out there look like you need a specialized certification to run them. Not with the Square Scrub. Not only is it easy to operate but every process is simple and straightforward. Anyone can do it! Even if you’ve never operated a floor machine, just visit our website for step by step instructions and how to videos and you are on your way to beautiful floors!

Got an iDevice?You can still view and download videos on our site.

800.

557.

6822

| w

ww

.squ

ares

crub

.com

9

Old Way

Square Scrub Way

Floor Finish Removal

10

Dry Vac Kit**Square Scrub’s Dry Vac Kit attaches to all Square Scrub Machines* and plugs into the machine power with an adapter (included). Part# SSEBG-DVK

Universal Vacuum Bracket**Use this bracket to mount most backpack vacuums to your Square Scrub machine.* Part# SSEBG-UVB

Set up in minutes.

Dry Vac Kit/Universal Vacuum Bracket

Dry

800.

557.

6822

| w

ww

.squ

ares

crub

.com

11

American

Made

**Not designed to remove debris from floor.

Solution TankSquare Scrub’s Solution Tank attaches to all Square Scrub Machines* and dispenses water through the vacuum hole already integrated into the base plate of your machine and directly onto the work surface. Tank capacity = 5 quarts. Part# SSEBG-WTS Set up in minutes.

*Models without removable weights will require additional hardware for installation.

Solution Tank

Wet

American Made

12

Dry Prep

Palm SQPFor use with the Black and Decker mouse sander and detailer to get hard to reach areas. Exact same pad as the SQP Pad.

Part No.SSPMPSSQP

SQP PadThe SQP pad is a thin pad designed to remove several layers of acrylic finish in preparation for recoating. Use dry or wet on VCT and tile. MUST be used with a driver pad.

Part No.P1420SQP - 20”P1428SQP - 28”

Preps finished VCT

Surfaces up to 3,600 sq ft/hour*

with SQP Pad

*EBG-28 Machine. Results may vary.13

SHO PadThe SHO pad should be used on chemical stripping jobs. Extremely abrasive and heavy, dense fibers. Best when dirt and buildup are severe. Use wet on VCT and tile.

Part No.P1420SHO - 20”P1428SHO - 28”

Chemical Stripping

® ®

14

Round Diamond PolyPadsDiamond PolyPads for your High Speed Rotary Buffer. Diamond Pads come in the following grits 0800, 1500, 3000 and 6000. When ordering please note grit size at the end of the product number. ex: RDP13XXXX Sold individually or by the case.

Square Diamond PolyPadsOur diamond polypads, available in 0800, 1500, 3000 and 6000 grit for both 20” and 28” machines, take “shine” to a whole new level. Use in a daily stone maintenance program to retain a high gloss. Produces up to 50,000-100,000 sq ft per pad. Sold individually or by the case.

14x20SSPLP14200800SSPLP14201500 SSPLP14203000SSPLP14206000

14x28SSPLP14280800SSPLP14281500SSPLP14283000SSPLP14286000

Resin DiamondsSquare Scrub’s complete line of resin diamonds makes efficient work of any polishing project. Designed with efficiency in mind, the chevron shape maximizes coverage so you can move on to the next step and on to your next Square Scrub project.

Four bars are required for stone care.

Grit30 Grit 50 Grit

100 Grit200 Grit400 Grit800 Grit

1500 Grit3000 Grit

Part No.SSGD0030RSSGD0050RSSGD0100RSSGD0200RSSGD0400RSSGD0800RSSGD1500RSSGD3000R

Pad SizeRDP13RDP14RDP15RDP20RDP21RDP27

American Made15

Vacuum Braised DiamondsSquare Scrub’s vacuum braised diamonds are designed to remove finish from stone surfaces. These extremely aggressive diamonds should not be used in daily or routine maintenance, but excel in removing finish from Terrazzo and Marble.

Four bars are required for stone care.

Grit30 Grit 50 Grit

100 Grit

Part No.SSVBM030SSVBM050SSVBM100

Stone Polishing with Square Scrub

Square Scrub has spent hundreds of hours perfecting the Stone Polishing process. Combined with informative “How-To” videos and documentation readily available on the Square Scrub website, diamond polishing has never been faster or easier.

Chemical Free!For a complete list of what you will

need to polish Terrazzo - visit www.squarescrub.com/literature for a detailed “How-To” checklist.

Terrazzo

800.

557.

6822

| w

ww

.squ

ares

crub

.com

16

Square Paste for MarbleSSSPST2525When applied liberally on a White Driver Pad (P1420Driver, P1428Driver), Square Paste gives the final “pop” of shine at the conclusion of the stone care process. Apply after the final grit of diamonds has been used.

1 - 25lb Bucket

White Driver PadOriginally designed to provide space between your sandpaper and the machine. Just 1/4” thick, this pad is also a useful tool in combination with the EBG machine and Square Paste in the final steps of the Marble Polishing Process.

Part No.P1420DRIVER - 20”P1428DRIVER - 28”

For a complete list of what you will need to polish Marble - visit

www.squarescrub.com/literature for a detailed

“How-To” checklist.

Marble

17

Medium Granite PowderSSSGPMEDDark Granite PowderSSSGPDRKGranite Powder is available in “medium” and “dark”. Use the “dark” powder for black granite only and “medium” for all other types. Each 8 ounce container will cover approximately 150 sq ft.

2 - 8 ounce jars/carton

Granite

For a complete list of what you will need to polish Granite - visit

www.squarescrub.com/literature for a detailed “How-To” checklist.

® ®

18

Concrete

Resin/Metal Hybrid Diamonds for Concrete

Resin Diamonds for Concrete

Grit30 Grit 50 Grit

100 Grit200 Grit

Grit200 Grit 400 Grit 800 Grit

1500 Grit

Part No.SSCDMR0030SSCDMR0050SSCDMR0100SSCDMR0200

Part No.SSCDR0200SSCDR0400SSCDR0800SSCDR1500

Square Scrub’s complete line of resin diamonds makes efficient work of any polishing project. Designed with efficiency in mind, the chevron shape maximizes coverage so you can move on to the next step and on to your next Square Scrub project.

Eight bars are required for stone care.

For a complete list of what you will need to polish Concrete - visit

www.squarescrub.com/literature for a detailed “How-To” checklist.

19

EBG-20/C

Square GuardSSSGRD1A specially blended polymer that provides stain resistance for concrete. Square Guard allows concrete to breathe through a tough, long wearing, repairable surface. Apply after completing the 800 grit step. Each one gallon bottle will cover up to 2000 sq ft.

4 - 1 Gallon Bottlese

Square DensifierSSSDENSE5The ultimate blend of reactive silicates and active surface agents for use with polished concrete systems. It will harden, strengthen, increase resistance to stains and preserve the polished surface of your concrete. Apply densifier after completion of the 200 grit pass. Be certain to remove any excess that has not dried in 30 minutes. One gallon will cover up to 750 sq ft.

4 - 1 Gallon Bottles

“Toolip” DiamondsThe long-lasting metal “Toolip” (pronounced “tulip”) diamonds from Square Scrub are there for the heavy work. Each bar is 19” in length, making it necessary for just two bars for each grit. Aggressive and durable, these diamonds will grind paint off concrete while exposing the “salt-and-pepper” look in your concrete surface. All metal diamonds will need two bars per grit. Always use metal diamonds wet.

Grit24 Grit 30 Grit 50 Grit

100 Grit 200 Grit400 Grit

Part No.SSTD0024SSTD0030SSTD0050SSTD0100SSTD0200SSTD0400

® ®

20 *Models without removable weights will require additional hardware for installation.

Machine shown with the Solution Tank and

additional weightsSee page 12 for more

information

Square Tile PolishSSSTP6LBA natural, non-wax compound to restore and polish most unglazed ceramic, porcelain, and quarry tiles. Slip resistant, it will not yellow and eliminates the need to wax tiles. Will cover up to 672 sq ft per bucket. Sold in 6 lb buckets.

1- 6 lb Bucket

Square Tile RinseSSSTR1GALTo be used after Square Tile Polish. A safe and effective grout cleaner for ceramic, porcelain, and quarry tiles. Ideal for use in bathrooms or pool areas. Will cover up to 480 sq ft per gallon.

1 Gallon Bottle

Tile and Grout Polishing Chemicals

For a complete list of what you will need to polish Tile using Square Tile Polish and Square Tile Rinse - visit www.squarescrub.com/literature for a detailed

“How-To” checklist.

800.

557.

6822

| w

ww

.squ

ares

crub

.com

21

Tile and Grout Wet PadOur Tile and Grout pad is best on grouted tile floors, but can be used very effectively on terrazzo, poured non-slip, concrete and other uneven floors. Use wet.

Part No.P1420TG - 20”P1428TG - 28”

Doodle Bug Wet PadGreat for use in small spaces and baseboards. Use wet.

Part No.P0511DB - Doodle Bug Pad

Motor Scrubber Wet PadGreat for use in small spaces and baseboards. Use wet.

Part No.P0008MS - Motor Scrubber Pad

Tile and Grout Pad

Tile and Grout Specialty Pads

22

Scrub BrushUse our Scrub Brush for cleaning grout lines in large tile floors (8x8 or larger) and for scrubbing tough stains on hard surfaces. The center tile and grout pad is attached by its own grip face for maximum performance.

Part No.B1420BRUSH - 20”P1016BI - Tile and Grout Insert

Just Add Water!

23

Tile and Grout Brush

Look how much dirt we pulled up in just one pass - using only water!

® ®

24

Adheres even better with our new grip face!

Great on all

types of Stairs!

Before

Rubberized Stairs

Non-Slip StairsAfter

25

Under Cabinets and in Small Spaces

Corners

26

Part# SS0403Z- 18”

Part# SS0406Z- 24”

Bucket on a StickPart# SSBOS24 - 24”Part# SSBOS18 - 18”

Clean Baseboards

Microfiber Mop Heads

Long Lasting American Made

Components

27

Apply floor finish efficiently and evenly with the microfiber

mophead

®

®

800.

557.

6822

| w

ww

.squ

ares

crub

.com

Aluminum Handle with an Easy to Replace Bicycle Brake Cable Release

28

®Holds 5 Quarts of Finish

Extra Large Opening for Easy Pour

SandscreensSandscreens are ideal for finish removal or repair of wood floor surfaces, such as gym floors. Can be used to repair painted floor surfaces. Both sides of screen can be used. Use with Blue Driver Pad P1420BLU. Use dry on wood or wet on painted concrete.

14x20S1420060S1420080S1420100S1420120 S1420150

N/A

60 Grit80 Grit

100 Grit120 Grit150 Grit180 Grit

14x28S1428060S1428080S1428100S1428120S1428150S1428180

Part No.Grit

Gymnasium Floors

Never underestimate the power of a straight line. At Square Scrub, a straight line means efficiency. The ability to control your movement allows you to do more with one pass. Using the EBG machine helps you prep the work area faster and more efficiently so you can move on to the next job.

Productivity2®

29

Flat, Consistent, Even Screening

*EBG-28 Machine, results may vary.

Screen Gym Floors up to 10,000 sq ft/hour* with

120 grit sandscreen

28 Inches of Sanding Power !! American Made

800.

557.

6822

| w

ww

.squ

ares

crub

.com

30

14x20PPSP1319016PPSP1319024 PPSP1319036PPSP1319060 PPSP1319080PPSP1319100

14x20SP1319020SP1319036 SP1319060SP1319080 SP1319100

16 Grit24 Grit36 Grit60 Grit80 Grit

100 Grit

20 Grit36Grit60 Grit80 Grit

100 Grit

14x28PPSP1327016PPSP1327024PPSP1327036PPSP1327060PPSP1327080PPSP1327100

14x28SP1327020SP1327036SP1327060SP1327080SP1327100

Part No.

Part No.

Grit

Grit

Standard SandpaperOur Standard Sandpaper comes in a variety of grits to tackle any of your wood floor needs. Use these for smoothing wood surfaces. Use the White Driver Pad P1420DRIVER or P1428DRIVER. Use dry on wood flooring or decks.

Lasts up to 6x Longer!

Hardwood Floors

Pro SandpaperOur Pro Sandpaper is double-sided and longer lasting than standard sandpaper, cutting paper usage drastically! Comes in grits ranging from the ultra-aggressive 16 grit to the popular 100 grit. Use these for smoothing wood surfaces. BOTH sides of this paper can be used! Use the White Driver Pad P1420DRIVER or P1428DRIVER. Use dry on wood flooring or decks. Lasts up to 6x longer! Our 16 grit Pro Sandpaper also works great on gum removal!

31 Removes Chair and Drum Sander Marks

® ®

32

Sands Flat and Even

Easy to Control

Abrader Plate - SAP

Carbide Tungsten steel abrader tool. Designed for heavy duty use, including removing linoleum, glue or paint on concrete. ALWAYS USE WET.

Part No.P1319SAP - 20”P1327SAP - 28”

Abrader PlateHand scraping is going to take a while...

33

Carpet Glue Removal

Epoxy Removal

Square Scrub Makes it EASY!

800.

557.

6822

| w

ww

.squ

ares

crub

.com

34

35

Carpet BonnetCombined with a carpet encapsulation chemical, the Carpet Bonnet deep cleans even the highest-traffic carpeting. Quicker drying time. Use wet on any carpeted surface. Machine washable.

Part No.P1420CB - 20”

Durable! Lasts up to 50 wash cycles

Carpet Bonnet

® ®

36

1/4” thick pad used primarily as a spacer pad between the machine and other pads. USE THIS PAD WITH SANDPAPER, RESIN DIAMONDS, TOOLIP DIAMONDS, AND VACUUM BRASED DIAMONDS

Part No.P1420DRIVER - 20”P1428DRIVER - 28”

Ideal for use as a spacer pad between the machine and other pads because of it’s superior ability to hold it’s form. Also a medium to heavy duty pad that can be used both for heavier cleaning and buffing situations.

Part No.P1420BLU - 20”P1428BLU - 28”

Primarily used as a spacer pad between the machine and other pads. Also a light cleaning pad that can be used both for heavier cleaning and buffing situations.

Part No.P1420RED - 20”P1428RED - 28”

Blue Driver

Red Driver

White Driver

37

For the removal of scuff marks on VCT or bathroom tile. Just add water and this melamine pad deep cleans between refinishing jobs. Use WET on VCT.

Part No.P1420XTR - 20”P1428XTR - 28”

Square Shine

Square Shine Floor Reviver is a concentrated, economical formula that will breathe new life into your finished flooring.

Part No.SQSFLR14PN - 4-One Gallon Bottles

Xtreme Sponge

Removes Scuff Marks!

38

SSE Pad

The SSE (Enhancer Pad) is a restorative pad to be used with Square Shine Floor Reviver. Use Wet on VCT and tile.

Part No.P1319SSE - 20”P1327SSE - 28”

SSE Pad

EBG-20/C EBG-28CA/ETL/CE CertifiedBase w/No Weights or Handle 70 lbs 81 lbsTotal Assembled Weight 164 lbs 216 lbsMaximum Weight Capacity 329 lbs 216 lbsPowder Coated Steel Frame 10 Gauge 7 Gauge3/4” Solid Steel AxleAdjustable Handlew/Transport Lock6”x2” Non-Marking Wheelsw/Ball BearingsMotor 3450 1.5 hp 3450 1.5 hpOperating Sound Output 69 db 69 dbPower Cord 50 Foot /14 Gauge 50 Foot /14 GaugeLighted PlugAmp Draw 6.9 amps 9.6 ampsPad Size 14x20 14x281-1/4” Isolators 4 8Oscillations 3450/minute 3450/minuteRemovable WeightsSlotted WeightsVibration Reduced HandleNoise Reducing Weight SpacersStone Care CapableCarpet Capable N/ADust Containment KitBuilt-In Hour Meter Optional OptionalTwo Piece Handle Optional Optional

2 EBG-20/C

800.557.6822 | www.squarescrub.com

EBG-20/C

39

Versatility2®

American

Made

EBG-28EBG-20/C EBG-28

CA/ETL/CE CertifiedBase w/No Weights or Handle 70 lbs 81 lbsTotal Assembled Weight 164 lbs 216 lbsMaximum Weight Capacity 329 lbs 216 lbsPowder Coated Steel Frame 10 Gauge 7 Gauge3/4” Solid Steel AxleAdjustable Handlew/Transport Lock6”x2” Non-Marking Wheelsw/Ball BearingsMotor 3450 1.5 hp 3450 1.5 hpOperating Sound Output 69 db 69 dbPower Cord 50 Foot /14 Gauge 50 Foot /14 GaugeLighted PlugAmp Draw 6.9 amps 9.6 ampsPad Size 14x20 14x281-1/4” Isolators 4 8Oscillations 3450/minute 3450/minuteRemovable WeightsSlotted WeightsVibration Reduced HandleNoise Reducing Weight SpacersStone Care CapableCarpet Capable N/ADust Containment KitBuilt-In Hour Meter Optional OptionalTwo Piece Handle Optional Optional

40

28 Inches of Scrubbing

Power !!

EBG-28

American Made

EBG-20/EEBG-20/E

CA/ETL/CE CertifiedBase w/No Weights or Handle 69.5 lbsTotal Assembled Weight 114 lbsMaximum Weight Capacity 114 lbsPowder Coated Steel Frame 10 Gauge3/4” Solid Steel AxleAdjustable Handlew/Transport Lock N/A

6”x2” Non-Marking Wheelsw/Ball BearingsMotor 3450 1.5 hpOperating Sound Output 69 dbPower Cord 35 Foot/14 GaugeLighted Plug N/AAmp Draw 6.4 ampsPad Size 14x201-1/4” Isolators 4Oscillations 3450/minuteRemovable Weights N/ASlotted Weights N/AVibration Reduced Handle N/ANoise Reducing Weight Spacers N/AStone Care Capable N/ACarpet Capable N/ADust Containment Kit OptionalBuilt-In Hour Meter OptionalTwo Piece Handle N/A

American Made800.557.6822 | www.squarescrub.com41

Peace of Mind

It’s not easy getting certified. It takes months and months of rigorous testing to become ETL/CSA/CE certified. But to us, it was worth the added effort to make sure that when someone uses our machine, they have a machine they know they can trust.

Who would want to use any other machine?

Confidence!

800.

557.

6822

| w

ww

.squ

ares

crub

.com

42

ETL/CSA/CE

Square ScrubP.O. Box 1693

Jonesboro, AR 72403800.557.6822 | www.squarescrub.com

ETL/CSA/CE

EBG Series Surface Preparation Machines

The One You Want.

The One You NEED!

Are there other machines out there? Yes. Could they handle some jobs? Could you “get by” with those other machines? Maybe?

Will they get the job done, do it well AND make your job easier? Are they the one you need? Are they the one you want? NO!

At Square Scrub, we don’t want you to settle for any machine. You need a machine that will partner with you to get the job done. One that will step up and tackle any project that comes your way, both quickly and efficiently. A machine whose versatility will offer opportunities for your business to grow and expand.

With removable weights that can be adjusted to a maximum weight of 329 lbs., easy transport, and over 100 types of pads, plates, screens and brushes, the Square Scrub EBG Series Surface Preparation machine is not only the one you want - it’s the one you NEED.

® ®

EBG-20/C

EBG-28