EASTERN
www.easternfirst.com
EASTERN LINE CARD
EASTERN
FASTENERS & GASKETS
• Wedge Anchors• Drop In Anchors• Sleeve Anchors• Center Pin Drive• Expansion Anchors• Drive Nails• Concrete Screws• Lag Shields• Hollow Wall• Drywall Anchors• Wedge Bolts• Epoxy• Sammy Screws
ANCHORS
• Threaded Anchors• Studs• L Bolts
WET SET CONCRETE ANCHORS
• Mild Steel• A193 B7• Grade 8• Acme• Stainless Steel• Brass
THREADED ROD
• A325 - A490 Tension Control (TCB) - Plain or Galvanized Finish
STRUCTURAL BOLTS
• Dowel• Spring Roll• Clevis• Cotter
PINS• Lynch• Hitch• Hairpin Cotter• Lock
• SAE• USS• F436• Fender
FLAT WASHERS• Brute• Bevel• Metric
• Split Lock• Internal Star• External Star
LOCK WASHERS• Hi Collar• Metric
• Drills• Dies• Taps• Masonry
CUTTING TOOLS• Hole Saws• End Mills• Industrial
Abrasives
• Pipe Plugs• Shaft Collars• Cable/Wire Ties• Hose Clamps
OTHER FASTENER PRODUCTS• Hex Keys• Helical Inserts &
Repair Kits
• Blind Rivets• Solid Rivets• Rivet Nuts
RIVETS• Specialty Rivets• Setting Tools
• Hex Head• Pan Head• Flat Head
SELF DRILLING SCREWS• Modified Truss• K Lath
• Pan Head• Flat Head• Hex Head• Hex Washer Head
TAPPING SCREWS• Tamper Proof• Type AB, Type A,
Type B, Type 25, Type F, Type 23
• Drywall Screws• Deck Screws• Type U
SCREWS• SEMS• Wood Screws
• Grade 8• Grade 5• Grade 2
HEX CAP SCREWS• Metric 10.9• Metric 8.8
• Pan Head• Flat Head• Round Head• Truss Head
MACHINE SCREWS• Oval Head• Hex Head• Metric• Tamper Proof
• Finish Hex Nuts• Structural Hex Nuts• Hex Jam Nuts• Nylock Nuts• T Nuts• Connector Nuts• Weld Nuts• Flange Nuts• Castle Nuts• Slotted Nuts• Keps Nuts
NUTS• Serrated Flange
Lock Nuts• Flex Lock Nuts• Coupling Nuts• All Metal
Lock Nuts• Wing Nuts• Acorn Nuts• Square Nuts• Metric
• Connector Bolts• Serrated Washer
Flange Bolts• 12-Point Counter-bore
Step Bolts• Elevator Bolts• Square Head Bolts
BOLTS• U-Bolts• Plow Bolts• Hex Tap Bolts• Hanger Bolts• Hex Lag Bolts• Flange Bolts• Carriage Bolts
• Socket Cap Screw• Flat Headed Socket
Cap Screw• Button Head Socket
Cap Screw• Socket Set Screw
SOCKETS• Square Head
Set Screw• Socket Shoulder
Bolts• Metric• Tamper Proof
GASKETS & EXPANSION JOINTS• Urethane• VF• Metal Expansion
Joints• Rubber Expansion
Joints• Valve & Pump
Packing
• Spiral Wound• Diaphragm• Cork• PVC• Gum• Red• Black• Tan Sponge
• Rubber• Teflon• Viton• Aflas• Buna-N• EPDM• Kalrez• Neoprene• Silicone
• Standard Cut Sheet Gaskets
• Special Cut Sheet Gaskets
• Non-Asbestos• Gore-Tex• Grafoil• Gylon• Metal
AUTHORIZED STOCKING DISTRIBUTOR
The Niron product from Eastern is manufactured with Advanced Beta Crystalline Polypropylene Random Copolymer (PP-RCT) which allows
for up to twice the pressure rating at higher temperatures. Eastern's Niron system is used in place of copper, steel, and other materials
at a lower installation cost. Produced since 1982 by Nupigeco, over 150,000 miles of pipe and fittings have been installed on five
continents.
Eastern is Niron's distributor in the Southeast with inventory and size ranges from 1/2" through 24" to support your projects.
A WIDE VARIETY OF APPLICATIONS
Widos machines offer safe, trouble- and waste-free pipe welds and are made for simple and easy operating. It will take away the performance pressure and increase the motivation of your team, lowering physical
stress with less noise and lower weight.
Eastern provides training to our customers. We can also provide specification assistance and project quotations. Eastern is stocking a significant inventory of pipe, fittings, and fusion equipment to support your projects and deliver installed cost savings. Eastern can sell or
rent the machine that meets your specific needs and train your team to use the equipment safely and efficiently.
• Hydronic Heating• Liquid Chemicals• Water: Chilled, Recycle,
Glycol and Brine• Compressed Air• Geothermal• HVAC
PIPE AND FITTING PRODUCT OVERVIEW
PLUMBING PRODUCTS
VALVESBALL VALVES
PLUMBING FIXTURESFAUCETS
LIGHTED MIRRORS AND MEDICINE CABINETS
TOILETS, URINALS, AND SINKS
PUMPS - MECHANICAL EQUIPMENT
WATER HEATERS
• 125# thru 2500#• 1/2" thru 36"• Carbon/Stainless/Brass/Cast Iron• Blinds/Slip-On/Weld Neck/
Lap Joints• Cast and Rolled Angle Face Rings
FLANGES/ANGLE FACE RINGS
• 1/8" thru 6"• Sweat and Threaded• 125#/250#
COPPER/BRASS FITTINGS
• 1/8" thru 20"• 150#/300#• Black/Galvanized
MALLEABLE FITTINGS
• 1/4" thru 24"• See NIRON
POLYPROPYLENE PIPE/FITTINGS
• 3" thru 60"• Single Wall (Soil-tight)• Double Wall (N-12 IB)• Lengths or Coils
CORRUGATED PIPE/FITTINGS
• 1-1/2" thru 15"• Service Weight• No Hub
CAST IRON SOIL PIPE
• Chem-Tite• Conley Composites
LINED/COATED PIPE
• Alloy 20/Alloy C-276• Chrome Molly P11/P22• Welded/Seamless• 1/2" thru 12"
SPECIAL ALLOY PIPE
• 1/2" thru 6"• See Transair
ALUMINUM PIPE
• Standard/X Heavy/Sch 40/Sch 80• 1/4" thru 36"• Black/Galvanized• Import/Domestic• High Yield
CARBON STEEL FITTINGS
• Welded and Seamless• 1/8" thru 36"• ASTM A403WP, WPX, CR A774• Sch 5, Sch 10, Sch 40, Sch 80• T304/304L and T316/316L Grades• 150# Cast and Merchant• 3000# Threaded and Socket Weld• Sanitary
STAINLESS STEEL FITTINGS
• Stainless/Carbon/Brass/Nylon• ASTM A269 Tubing• .035, .049, .065 Walls
TUBE AND COMPRESSION FITTINGS
• Welded/ERW/Seamless• 1/8" thru 36"• Black/Galvanized• Plain End / T & C / Beveled End• API-5L
CARBON STEEL PIPE
• Welded and Seamless• 1/8" thru 36"• ASTM A312, A778• Sch 5, Sch 10, Sch 40, Sch 80• T304/304L and T316/316L Grades
STAINLESS STEEL PIPE
• 1/8" thru 6"• Types M, L, K• Hard and Soft• Lengths or Coils
COPPER TUBE
• 1/4" thru 20"• Sch 40 and Sch 80• PVC/CPVC• PVDF• DWV (Drainage Waste Vent)
THERMOPLASTIC PIPE/FITTINGS
• Bronze/Stainless Steel/ Carbon Steel/Cast Iron
• Thermoplastic/Specialty Ball Valves
BUTTERFLY VALVES• Iron & High Performance Steel
STRAINERS MECHANICAL/PLUMBING GATE, GLOBE, CHECK VALVES
INDUSTRIAL GATE, GLOBE, CHECK, PRESSURE SEAL VALVES
• Forged Carbon/Stainless Steel
• Cast Carbon/Stainless Steel
INDUSTRIAL PLUG VALVES• HOMESTEAD PLUG VALVES
VALVE ACTUATORS
• Pneumatic• Bronze/Iron
• Electric
VALVE POSITIONERS• Pneumatic/Electropneumatic
VALVE SWITCHES• Mechanical/Proximity
SOLENOID VALVES
KNIFE GATE - DIAPHRAGM VALVES
ENGINEERED VALVES
Fabri-Knife Gate Valves®Dia-Flo® diaphragm valves
EPIC PRODUCTS
Advance Composite PTFE-Lined Piping System• Zero Corrosion Rate• 50ft Pipe Spool Lengths Available• Full Vacuum Rated• Pressures to 275 PSI• Temperature Rating on -40F to +300F
PUREFLEX DURCOR
CORROSION RESISTANT PRODUCTS BY
Carbon Steel and Stainless Steel PTFE-Lined Piping System• Patent-Pending PTFE Vent Tube Design Protects
Weep Holes from Corrosive Permeations• Aircraft Grade Epoxy Paint on OD and ID of Pipe• Full Vacuum Rated• Pressures to 275 PSI• Temperature Rating on -40F to +400F
CHEM-TITE
Fiberglass Reinforced Plastic Piping Systems• Epoxy Resin Systems• Vinyl Ester Resin Systems• Epoxy or Vinyl Ester Double Containment Systems• Furan Resin Specialty Systems > Aggressive Chlorinated
Solvents
CONLEY COMPOSITES
• Chem-Tite PFA Lined Ball Valve for Severe Duty• Chem-Tite PFA Lined Ball Check Valve for Severe Duty• Chem-Tite PTFE/PFA Lined Butterfly Valve for Severe Duty• Chem-Tite TFM Lined Plug Valve for Severe Duty• Chem-Tite PFA Lined Bullseye Sight Flow Indicator for
Severe Duty
CHEM-TITE PFA/PTFE LINED VALVES
• Metal Unlined (DI, CS, 316L, Alloy 20 & others available)• Metal Lined (soft rubber, hard rubber, neoprene, poly pro,
PVDF, ETFE & PFA)• Glass Lined (Borosilicate)• Solid Plastic (PVC, poly pro, PVDF & PFA)• Several Diaphragm Options• Manual and Automated
HILLS-MCCANNA DIAPHRAGM VALVES
• Ball Valves• Butterfly Valves• Swing Check and Ball Check Valves
COMPOSITE VALVES
PTFE Expansion Joints• Several Styles Available
ETHYLENE FLEXIJOINT
Ultra-pure and Chemical Resistant PTFE Hoses and Fittings• Rubber Covered Smooth Bore, Virgin & Conductive Liners• Braided Smooth Bore, Virgin & Conductive Liners• Braided Convoluted, Virgin & Conductive Liners• Threaded Ends; Cam-Lok Ends; Compression, Splice,
Buttweld Ends; Sanitary Ends; Flanged Ends• Wide Range of End Fitting Materials
PUREFLEX HOSES
• P Series: Heavy Duty Air Driven Diaphragm Pumps• iPC Series: Plug & Play Air Driven Diaphragm Pumps• State-of-the-Art Controllers: Complete Control & Monitoring
Solution for Your Pumping System• Pro-Flo Centrifugal Pump: Rugged & Reliable Lined
Hydraulic Pumps• Accessories: Pulsation Dampeners, Leak Detectors,
Sidekick™, Strainers, Inline Ball Valves, Pump Stands
RAMPART PUMPS
STEAM TRAPS & CONTROL VALVES INSTRUMENTATION
• Corrosion-free• Leak-free• Reduced pressure drops• Easy to install and modify• Lightweight product• No special tooling required• Installs 6x faster than traditional systems• Qualicoat Certified Coating• Clear air certified ISO-8573-1 Class 1.1.1• 10-year warranty• 1/2" (16.5mm) thru 6" (168mm)
Transair is an Aluminum quick-to-connect pipe system
Push-to-connect16.5mm 25mm & 40mm
Small
Double clamp-ring50mm & 63mm
Medium
Clamshell76mm 100mm
& 168mmLarge
• Sleeved Plug Valves• Lined Plug Valves• Lined Ball Valves• Lined Butterfly Valves• HF Alkylation Plug Valves – UOP Listed• Pneumatic & Electric Actuation
• Corrosion Resistant Industrial Valves• 1/2"-36", Flanged, Butt Weld,
Threaded, & Socket Weld• Gate, Globe, Swing Check Valves
150#-600#• CF8M, CF3M, CF8, CF3, CK20,
CG8M, CF8C, CN7M, CW12MW, CY40, CW6MC, N12MV, N7M, M35-1, CZ100, CD3MN and other materials
• Cryogenic and Stop Check Valves
TUBS, SHOWERS, AND MIXING VALVES
• Compressed Air• Inert Gas• Vacuum
Transair is suitable for:
• High-Density Polyethylene• 3/4" thru 54"• AWWA, ASTM, NSF
HDPE PIPE/FITTINGS
• 800#-2500# Forged SW, NPT, Flanged, & BW Gate, Globe, and Check Valves
• 150#-2500# Forged & Cast SW, NPT, Flanged, & BW Bellows Seal Valves
• 150#-2500# Forged Flanged & BW Pressure Seal Gate, Globe, & Check Valves
• API6A Valves• Fluicon Triple Offset Butterfly Valves
• Innovative Triple & Double Offset Butterfly Valve Solutions
• 2'-48", Class 150 thru Class 2500• Wafer, Lugged, DFSP, DFLP, BWE,
Hub, and many more end connections• CS, SS, and High Alloy offerings• Manual, Electric, Pneumatic, &
Hydraulic actuation capabilities• Double Block & Bleed / Double
Isolation Triple Offset Valve solutions
• Engineered Ball Valve Solutions• 1/2"-24", 150#-2500#, Flanged,
Threaded, Socket Weld, Wafer, Trunion, and Special Configurations
• Most alloys available, Live Loaded Packing, Metal Seats, Class V, VI, and zero leakage
• Steam Jacketed, Cryogenic, 3-way, and 4-way valves
• HT66 & HT99 high temperature & steam seat solutions
• Knife Gate Valves & Special Engineered Valves
• 2"-48", 150#-600#, Bi-directional, Uni-directional, & Resilient Seated
• Automated & Manual offered in CS, 304, 316, 317, 254/654SMO, Titanium, Hastelloy, and others alloys
• Scavenger & Square configurations• O-port Valves 2"-72"• HT65, HT1600, HCr72 & TICR-110,
VAC1 proprietary processes available corrosion & wear resistant
IRUELINE®VALVE CORPORATION