AnchorZip 10ROV Suction Anchor Pump
www.scorpionsubsea.com
Document: 0712-SOM-00002, Issue: 01
The AnchorZip 10 incorporates many advancesdeveloped from several years of producingTritech's industry standard range of ROVmounted jetting and excavation systems.
Specifically designed for ROV deployment, theAnchorZip 10 will interface with most workvehicle hydraulic systems. Vehicles fitted withthe AnchorZip 10 will offer a very quick and costeffective way of installing and removing suctionanchors. Output pressures may be regulated toensure that differential pressures remain withinthe structural limits of all types of suction anchor.
Flow reversal for anchor recovery is achievedsimply by sliding the motor and top assemblyfrom the input to the output side of the centrifugalpump.
Safe and reliable suction anchorinstallation and removalThe Tritech AnchorZip 10 is a unique productwhich has been developed using the highlysuccessful ZipPump and ZipJet technologies.The AnchorZip 10 is a heavy duty suction anchorpump designed for work-class vehicles able toproduce 25hp of hydraulic power.
Benefits• High efficiency• High performance• Easily interfaced• Proven ZipJet technology• Worldwide support
Features• Flow reversal for anchor recovery• Variable suction release valve preset• Durable moving body design
Applications• Deploy/recover large suction anchors• Work-class ROV mounting
Specification
Specifications subject to change according to a policy of continual development.
Marketed by: Scorpion Subsea604 Greenwood St.Morgan City, LA 70380
Document: 0712-SOM-00002, Issue: 01
Specification
452
315
Not to scale, dimensions in mm.
290
110
Ø72
4 off M16 x 2 on a 150mm PCD
Hydraulic InputSI Units US Units Other
Maximum input pressure 27.6MPa 4000psi 276 barMaximum input flow 0.001167m³·s-1 15 gallons per minute 70 litres per minute
Minimum actuator pressure 7MPa 1015psi 70 bar
OutputSI Units US Units Other
Typical differential pressure 950kPa 140psi 9.5 barTypical suction flow 0.0222m³·s-1 at 750kPa 352 gallons per minute at 109psi 80m³·hr-1 at 7.5 bar
Nozzle and Hose DimensionsSI Units US Units
Minimum hose diameter 72mm (internal diameter) 2.84" (internal diameter)Anchor port Square flange with 72mm port Square flange with 2.84" port
Weight and MaterialsSI Units US Units
Weight in air 30kg 66lbWeight in water 14kg 31lbMotor Parker F11 - 10Materials UHMWPE, stainless steel, cast nylon