and Adaptors GuideFibre Optic Connectors
www.fibrefab.co
About FibreFab
Interactive 360° Views of many of our products are available online, visit our product pages on www.fibrefab.co
In 1994 FibreFab acquired Optronics, a company with over 20 years experience in fibre optic manufacturing. Optronics products are available directly from FibreFab or from our worldwide distribution partners.
Wide Range
The Optronics fibre optic cable range includes simplex, duplex and flat ribbon patch cords, tight buffered, single loose tube and multi loose tube distribution cables for internal and external applications as well as many variations of armoured, aerial, rodent resistant and water blocked cables.
Solutions
The FibreFab Optronics range has the solution for almost any application and can offer a cut to length service for specific fibre optic bulk and patch cables. Please call the sales team for more information.
Established in 1992, FibreFab is a leading provider of fibreoptic connectivity products used in data communications and telecommunication networks. The company designs, develops, manufactures and sells fibre optic cabling, connectivity, management and systems solutions. It offers a broad range of products directly and through distributors, installers and OEM partners.
Customer Service
FibreFab’s growth has been founded on quality products, rapid response and excellent customer service.
Quality
All products are manufactured in ISO9001:2008 certified facilities and conform to applicable international standards. FibreFab is dedicated to value and continuous improvement of all its products and services.
Global Logistics
With headquarters in Milton Keynes (UK), FibreFab has manufacturing activities in the UK, China and US. The Company has both volume and quick response manufacturing capabilities and is able to support the global logistics requirements of its customers. FibreFab provides customised and customer branded products for OEM customers.
UK Rapid Response & Production Facilities China Production Facility
FiberFab IncUSA
FibreFab LtdUK
Optronics FZ LLC UAE
FibreFab Asia & PacifiChina
General Information
It is the customer's responsibility to check whether the components illustrated in this catalogue comply with different regulations from those stated in special fields of application we are unable to foresee
We reserve the right to modify designs in order to improve quality, keep pace with technological advancement or meet particular requirements in production.
No part of this catalogue may be reproduced in any form (print, photocopy, microfilm or any other process) or processed, duplicated or distributedby means of electronic systems without the written permission of FibreFab Limited. We are bound by the English version available via our company website.
© FibreFab Limited. All rights reserved, including those of any translations.
MEMBER OF
AVAILABLE
PRE-
TERMINATED SOLUTIO
NS
G.657A and G.657A/B PureLight™ also available G.657A
and G.657A/B PureLight™ also available
VISIT US ONLINE NOW WWW.FIBREFAB.COM
Connectors 6 -21SC Connectors 6LC Connectors 9ST Connectors 12FC Connectors 15Boots 18Field Installable Connectors 19Adaptors 24-33SC Adaptors 24LC Adaptors 25ST Adaptors 27FC Adaptors 28E2000 Adaptors 29MT-RJ Adaptors 30SC Shutter Adaptor 31MPO/MTP 32Hybrid Adaptors 33
Related Products 38-47Patch Cables 38Termination and Installation Tools 41Field Installable connector preparation Kit 42
Termination and Installation Tools 43Test and Measurement 44Cleaning Products 45
Technical Information 47Connector Performance 47
Contents
SC Connectors 06
LC Connectors 09
ST Connectors 12
FC Connectors 15
Boots 18
Field Installable Connectors 19
Connectors
6
FOR MORE INFORMATION CALL +44 (0) 1908 441144
The SC connector features a 2.5mm Zirconia Ceramic ferrule and a push/pull coupling mechanism for a fast and reliable connection.
A range of pigtail, simplex and duplex SC connectors are manufactured including Standard, Premium Low Loss and High Performance Grades which are suitable for various applications.
The SC connectors are available for singlemode UPC with blue boots, for
APC with green boots and for multimode PC with red or black boots suitable for 900µm, 2mm or 3mm cable diameters.
The SC/APC connector is available with a pre-angled ferrule designed for 8 degree angle polishing.
The SC connector housing and duplex clip are available in standard colours including blue (singlemode), green (singlemode APC) and beige (multimode).
► Complies with IEC 61754-4 and TIA 604-3-B, FOCIS-3 ► Low insertion loss and back reflection capabilit ► A push-pull coupling mechanism for easy
insertion and consistent connection ► Connector housing and duplex clip available in
different colours for easy identificatio ► Zirconia ceramic ferrule available in several performance grades ► RoHS materials, REACH SvHC compliant ► Individual parts packed in bulk package
► Telecommunications networks ► CATV - Cable television ► Fibre-To-The-Home (FTTH) ► LAN, MAN and WAN application ► Data processing networks ► Premises distribution
FeaturesApplications
Connectors
Simplex Patchcords
Duplex Patchcords
Packaging Options
Single Pack Bulk Pack
APC Singlemode Multimode
SC
Fibre Optic Connectors | Connectors and Adaptors GuideS
C C
onne
ctor
Pigtails
SC Duplex Connector (2mm / 3mm)
SC Pigtail Connector (900µm)
SC Simplex Connector (2mm/ / 3mm)
7
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Technical Drawings
Boot
Boot
Boot
Connector sub assembly
Connector sub assembly
Connector sub assembly
Crimp eyelet
Crimp eyelet
Crimp ring
Crimp ring
Coupling
Coupling
Coupling
Duplex Cap
Dust cap
8.85
8.85
26
48.20
48.20
56.65
29.45
29.45
Ø 2.50
Ø 2.50
7.30
7.30
7.30
1.65
1.65
12.70
Dust cap
Dust cap
All dimensions are in millimeters SC
Con
nect
or
For Data Centre applications FibreFab can supply OM3 and
OM4 products and bend insensitive fibre
DO YOU KNOW?
8
FOR MORE INFORMATION CALL +44 (0) 1908 441144
ConnectorsSCMechanical Properties Criteria Effect ConformanceMating Durability 500 matings <0.2 dB change IEC 61300-2-2
Vibration 10-55Hz, 0.75 amplitude <0.2 dB change IEC 61300-2-1
Drop Drop height 1m, 5 drops <0.2 dB change IEC 61300-2-12
Cable Retention Magnitude 90N <0.2 dB change IEC 61300-2-4
Cable Torsion 1.5kg - 2.5kg for 2mm-3mm cable diameter <0.2 dB change IEC 61300-2-5
Operating Temperature -25 to +70, 12 cycles <0.2 dB change IEC 61300-2-22
Cold -25 for 96 hrs <0.2 dB change IEC 61300-2-17
Dry Heat +70 for 96 hrs <0.2 dB change IEC 61300-2-18
Technical Specificatio
Optical Performance* High Performance Low Loss Premium Standard ConformanceIL MAX/Master (Acceptance) 0.10dB 0.15dB 25dB IEC 61300-3-4
IL MAX/Random (97%) 0.20dB 0.30dB 0.40dB IEC 61300-3-34
Ave/Master 0.08dB 0.12dB 0.18dB IEC 61300-3-4
Ave/Random 0.08dB 0.12dB 0.18dB IEC 61300-3-34
Return Loss 55/70dB 55/65dB 55/65dB IEC 61300-3-6
Mechanical Properties* Low Loss Premium Standard ConformanceIL MAX/Master (Acceptance) 0.15dB 0.3dB IEC 61300-3-4
IL MAX/Random (97%) 0.25dB 0.4dB IEC 61300-3-34
Ave/Master 0.08dB 0.15dB IEC 61300-3-4
Ave/Random 0.1dB 0.2dB IEC 61300-3-34
SC Connector PC and APC - Singlemode
SC Connector PC - Multimode
* Achievable with FibreFab process and specified optical fibOrdering Information
Singlemode High Performance Low Loss Premium Standard
PC
Simplex
900µm SCSM9SMPX-H SCSM9SMPX-P SCSM9SMPX
2mm SCSM2SMPX-H SCSM2SMPX-P SCSM2SMPX
3mm SCSM3SMPX-H SCSM3SMPX-P SCSM3SMPX
Duplex2mm SCSM2DPX-H SCSM2DPX-P SCSM2DPX
3mm SCSM3DPX-H SCSM3DPX-P SCSM3DPX
APC
Simplex
900µm SCAPC.9MM-H SCAPC.9MM-P SCAPC.9MM
2mm SCAPC2MM-H SCAPC2MM-P SCAPC2MM
3mm SCAPC3MM-H SCAPC3MM-P SCAPC3MM
Duplex2mm SCAPC2DPX-H SCAPC2DPX-P SCAPC2DPX
3mm SCAPC3DPX-H SCAPC3DPX-P SCAPC3DPX
Multimode Low Loss Premium Standard
PC
Simplex
900µm SCMM9SMPX-P SCMM9SMPX
2mm SCMM2SMPX-P SCMM2SMPX
3mm SCMM3SMPX-P SCMM3SMPX
Duplex2mm SCMM2DPX-P SCMM2DPX
3mm SCMM3DPX-P SCMM3DPX
Fibre Optic Connectors | Connectors and Adaptors GuideS
C C
onne
ctor
9
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Pigtails
Simplex Patchcords
Duplex Patchcords
Singlemode Multimode
The LC connector features a 1.25mm Zirconia ferrule in a small form factor (SFF) fibre optic connector housing with a snag free latch which gives an audible click upon engaging for reliable and high density connections.
A range of pigtail, simplex and duplex LC connectors are manufactured including Standard, Premium Low Loss and High Performance Grades which are suitable for various applications.
The LC connectors are available for singlemode UPC with white or blue
boots, for APC with green boots and for multimode PC with white, red or black boots suitable for 900µm or 3mm cable diameters or with heatshrink and crimp cable retention method for 2mm cable diameters (white and yellow for duplex and yellow for simplex).
The LC connector is available in simplex and duplex (with clips) in standard colours including blue (singlemode) , green (singlemode APC) and beige (multimode).
► Complies with IEC 61754-20 and TIA 604-10-B, FOCIS-10 for intermateability
► Low insertion loss and back reflection capabilit ► Compact SFF design with snag free latch for
easy insertion and consistent connection ► Connector housing and duplex clip available in
different colours for easy identificatio ► Zirconia ceramic ferrule available in several performance grades ► RoHS materials, REACH SvHC compliant ► Individual parts packed in bulk package
► Datacentre applications ► Telecommunication networks ► LAN, MAN and WAN application ► Data processing networks ► CATV - Cable television ► Fibre-To-The-Home (FTTH) ► Premises distribution
FeaturesApplications
ConnectorsLC
Packaging Options
Single Pack Bulk Pack
LC C
onne
ctor
FibreFab manufactures specialized boots suitable
for Flexible handling and Mapping. For more
information go to page 18.
DO YOU KNOW?
All dimensions are in millimeters
LC Pigtail Connector
LC Simplex Connector
LC Duplex Connector
10
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Technical Drawings
5.65
5.65
6.25
5.65
4.47
4.47
4.47 8.
2 10.7
8.6
8.6
8.6
4.47
4.47
4.47
4.3
4.3
4.3
3.2
3.2
3.2
2.3
2.3
2.3
A
A
A
A
A
A
Section A - A
Section A - A
Section A - A
4.93
4.93
4.93
34.50REF
31.90REF
50.30REF
50.5REF
3.4
3.4
Mechanical Reference Plane
Mechanical Reference Plane
Mechanical Reference Plane
Optical Reference Plane
Optical Reference Plane
Optical Reference Plane
Ø 3
.05
Ø 3
.05
Ø 3
.05
Dust cap
Dust cap
Dust cap
Ferrule Assembly
Ferrule Assembly
Ferrule Assembly
Spring
Spring
Spring
Coupling
Coupling
Coupling
PTFE Tube
PTFE Tube
PTFE Tube
Heat Shrink
Heat Shrink
Duplex Clip
Stopper
Stopper
Stopper
Boot
Boot
Boot
ConnectorsLC
Fibre Optic Connectors | Connectors and Adaptors GuideLC
Con
nect
or
11
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Mechanical Properties Criteria Effect ConformanceMating Durability 500 matings <0.2 dB change IEC 61300-2-2
Vibration 10-55Hz, 0.75 amplitude <0.2 dB change IEC 61300-2-1
Drop Drop height 1m, 5 drops <0.2 dB change IEC 61300-2-12
Cable Retention Magnitude 70N <0.2 dB change IEC 61300-2-4
Cable Torsion 1.5kg - 2.5kg for 2mm-3mm cable diameter <0.2 dB change IEC 61300-2-5
Operating Temperature -25 to +70, 12 cycles <0.2 dB change IEC 61300-2-22
Cold -25 for 96 hrs <0.2 dB change IEC 61300-2-17
Dry Heat +70 for 96 hrs <0.2 dB change IEC 61300-2-18
Technical Specificatio
Optical Performance* High Performance Low Loss Premium Standard ConformanceIL MAX/Master (Acceptance) 0.10dB 0.15dB 0.25dB IEC 61300-3-4
IL MAX/Random (97%) 0.20dB 0.30dB 0.40dB IEC 61300-3-34
Ave/Master 0.08dB 0.12dB 0.18dB IEC 61300-3-4
Ave/Random 0.08dB 0.12dB 0.18dB IEC 61300-3-34
Return Loss 55/70dB 55/65dB 55/65dB IEC 61300-3-6
Mechanical Properties* Low Loss Premium Standard ConformanceIL MAX/Master (Acceptance) 0.15dB 0.30dB IEC 61300-3-4
IL MAX/Random (97%) 0.25dB 0.40dB IEC 61300-3-34
Ave/Master 0.08dB 0.15dB IEC 61300-3-4
Ave/Random 0.10dB 0.20dB IEC 61300-3-34
LC Connector PC and APC - Singlemode
LC Connector - Multimode
* Achievable with FibreFab process and specified optical fib
Ordering Information
Singlemode High Performance Low Loss Premium Standard
PC
Simplex
900µm LCSM9-H LCSM9-P LCSM9
2mm LCSM2-H LCSM2-P LCSM2
3mm LCSM3SMPX-H LCSM3SMPX-P LCSM3SMPX
Duplex2mm LCSM2DPX-H LCSM2DPX-P LCSM2DPX
3mm LCSM3DPX-H LCSM3DPX-P LCSM3DPX
APCSimplex
900µm LCAPC.9MM-H LCAPC.9MM-P LCAPC.9MM
2mm LCAPC2MM-H LCAPC2MM-P LCAPC2MM
Duplex 2mm LCAPC2DPX-H LCAPC2DPX-P LCAPC2DPX
Multimode Low Loss Premium Standard
PC
Simplex
900µm LCMM9-P LCMM9
2mm LCMM2-P LCMM2
3mm (Black boot) LCMM3BLK-P LCMM3BLK
3mm (Red boot) LCMM3RED-P LCMM3RED
Duplex2mm LCMM2DPX-P LCMM2DPX
3mm (Red & Black boots) LCMM3DPX-P LCMM3DPX
Fibre Optic Connectors | Connectors and Adaptors Guide
LC C
onne
ctor
12
FOR MORE INFORMATION CALL +44 (0) 1908 441144
The ST connector features a 2.5 mm ferrule with a quick release bayonet (stick and twist) style body for ease of use.
A range of ST connectors is manufactured including Standard, Premium Low Loss and High Performance Grades which are suitable for various
applications. ST connectors are available for singlemode UPC with yellow boots, APC with green boots and multimode PC with black or red boots suitable for either 900µm, 2mm or 3mm cable diameters.
► Complies with IEC 61754-2 and TIA 604-2-B, FOCIS-2 ► Low insertion loss and back reflection capabilit ► Bayonet style (stick and twist) housing for easy connection ► Nickel plated metal body ► Zirconia ceramic ferrule available in
several performance grades ► RoHS materials, REACH SvHC compliant ► Individual parts packed in bulk package
► Local area networks ► Data processing networks ► Distribution application ► Premises distribution
FeaturesApplications
ConnectorsST
Single Pack Bulk Pack
Packaging Options
Fibre Optic Connectors | Connectors and Adaptors GuideS
T C
onne
ctor
ST Connector
ST Pigtail Connector
13
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Technical Drawings
Dust cap
Dust cap
Stopper
Stopper
Lock Ring
Lock Ring
Protective Tube
Boot
Boot
Ferrule
Ferrule
Spring
Spring
Coupling Nut
Coupling Nut
Crimp Eyelet
53.4REF
43.6REF
25
99
99
7.95
7.95
Section A - A
Section A - A
A
A
A
A
All dimensions are in millimeters
Fibre Optic Connectors | Connectors and Adaptors Guide
ST
Con
nect
or
14
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Mechanical Properties Criteria Effect ConformanceMating Durability 500 matings <0.2 dB change IEC 61300-2-2
Vibration 10-55Hz, 0.75 amplitude <0.2 dB change IEC 61300-2-1
Drop Drop height 1m, 5 drops <0.2 dB change IEC 61300-2-12
Cable Retention Magnitude 90N <0.2 dB change IEC 61300-2-4
Cable Torsion 1.5kg - 2.5kg for 2mm-3mm cable diameter <0.2 dB change IEC 61300-2-5
Operating Temperature -25 °C to +70 °C, 12 cycles <0.2 dB change IEC 61300-2-22
Cold -25 for 96 hrs <0.2 dB change IEC 61300-2-17
Dry Heat +70 for 96 hrs <0.2 dB change IEC 61300-2-18
Technical Specificatio
Optical Performance* High Performance Low Loss Premium Standard ConformanceIL MAX/Master (Acceptance) 0.10dB 0.15dB 25dB IEC 61300-3-4
IL MAX/Random (97%) 0.20dB 0.30dB 0.40dB IEC 61300-3-34
Ave/Master 0.08dB 0.12dB 0.18dB IEC 61300-3-4
Ave/Random 0.08dB 0.12dB 0.18dB IEC 61300-3-34
Return Loss 55/70dB 55/65dB 55/65dB IEC 61300-3-6
Mechanical Properties* Low Loss Premium Standard ConformanceIL MAX/Master (Acceptance) 0.15dB 0.30dB IEC 61300-3-4
IL MAX/Random (97%) 0.25dB 0.40dB IEC 61300-3-34
Ave/Master 0.08dB 0.15dB IEC 61300-3-4
Ave/Random 0.10dB 0.20dB IEC 61300-3-34
ST Connector - Singlemode
ST Connector - Multimode
* Achievable with FibreFab process and specified optical fib
Ordering Information
Singlemode High Performance Low Loss Premium Standard
PC Simplex
900µm STSM9-H STSM9-P STSM9
2mm STSM2YEL-H STSM2YEL-P STSM2YEL
3mm STSM3YEL-H STSM3YEL-P STSM3YEL
Multimode Low Loss Premium Standard
PC Simplex
900µm STMM9-P STMM9
2mm (Black) STMM2BLK-P STMM2BLK
2mm (Red) STMM2RED-P STMM2RED
3mm (Black) STMM3BLK-P STMM3BLK
3mm (Red) STMM3RED-P STMM3RED
ConnectorsST
Fibre Optic Connectors | Connectors and Adaptors GuideS
T C
onne
ctor
15
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
The FC connector features a 2.5 mm ferrule and a threaded metal coupling nut, for a secure connection in high vibration environments and in laboratory testing for consistent results.
A range of FC connectors are manufactured including Standard, Premium Low Loss and High Performance Grades which are suitable for various
applications.
The FC Connectors are available for singlemode UPC with blue boots, APC with green boots and multimode PC with black boots suitable for 900µm, 2mm or 3mm cable diameters.
► Complies with IEC 61754-13 and TIA 604-4-B, FOCIS-4 for intermateability
► Low insertion loss and back reflection capabilit ► Precision anti rotation key for mechanical stability ► Nickel plated metal body corrosion resistant ► Zirconia ceramic ferrule available in several performance grades ► RoHS materials, REACH SvHC compliant ► Individual parts packed in bulk package
► Telecommunication networks ► Local area networks ► Data processing networks ► Distribution application ► Premises distribution ► Test and laboratory equipment
Features Applications
Pigtails
Simplex Patchcord
APC Singlemode Multimode
ConnectorsFC
Single Pack Bulk Pack
Packaging Options
Fibre Optic Connectors | Connectors and Adaptors Guide
FC C
onne
ctor
FC Connector
FC Pigtail Connector
16
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Technical Drawings
Dust cap
Dust cap
Plug Frame
Plug Frame
Spring
Spring
Crimp Ring
Boot
Boot
Key Ring
Key Ring
Washer
Washer
Ferrule Assembly
Ferrule Assembly
Stopper
Stopper
Coupling Nut
Coupling Nut
Crimp Eyelet
2
2
56
37.5
17.5
17.5
3.9
3.9
1010
Section A - A
Section A - A
A
A
A
A
All dimensions are in millimeters
ConnectorsFC
Fibre Optic Connectors | Connectors and Adaptors GuideFC
Con
nect
or
17
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Mechanical Properties Criteria Effect ConformanceMating Durability 500 matings <0.2 dB change IEC 61300-2-2
Vibration 10-55Hz, 0.75 amplitude <0.2 dB change IEC 61300-2-1
Drop Drop height 1m, 5 drops <0.2 dB change IEC 61300-2-12
Cable Retention Magnitude 90N <0.2 dB change IEC 61300-2-4
Cable Torsion 1.5kg - 2.5kg for 2mm-3mm cable diameter <0.2 dB change IEC 61300-2-5
Operating Temperature -25 °C to +70 °C, 12 cycles <0.2 dB change IEC 61300-2-22
Cold -25 for 96 hrs <0.2 dB change IEC 61300-2-17
Dry Heat +70 for 96 hrs <0.2 dB change IEC 61300-2-18
Technical Specificatio
Optical Performance* High Performance Low Loss Premium Standard ConformanceIL MAX/Master (Acceptance) 0.10dB 0.15dB 0.25dB IEC 61300-3-4
IL MAX/Random (97%) 0.20dB 0.30dB 0.40dB IEC 61300-3-34
Ave/Master 0.08dB 0.12dB 0.18dB IEC 61300-3-4
Ave/Random 0.08dB 0.12dB 0.18dB IEC 61300-3-34
Return Loss 55/70dB 55/65dB 55/65dB IEC 61300-3-6
Mechanical Properties* Low Loss Premium Standard ConformanceIL MAX/Master (Acceptance) 0.15dB 0.30dB IEC 61300-3-4
IL MAX/Random (97%) 0.25dB 0.40dB IEC 61300-3-34
Ave/Master 0.08dB 0.15dB IEC 61300-3-4
Ave/Random 0.10dB 0.20dB IEC 61300-3-34
FC Connector PC and APC - Singlemode
FC Connector - Multimode
* Achievable with FibreFab process and specified optical fib
Ordering Information
Singlemode High Performance Low Loss Premium Standard
PC Simplex
900µm FCSM9-H FCSM9-P FCSM9
2mm FCSM2-H FCSM2-P FCSM2
3mm FCSM3-H FCSM3-P FCSM3
APC Simplex
900µm FCAPC.9MM-H FCAPC.9MM-P FCAPC.9MM
2mm FCAPC2MM-H FCAPC2MM-P FCAPC2MM
3mm FCAPC3MM-H FCAPC3MM-P FCAPC3MM
Multimode Low Loss Premium Standard
PC Simplex
900µm FCMM9-P FCMM9
2mm FCMM2-P FCMM2
3mm FCMM3-P FCMM3
Fibre Optic Connectors | Connectors and Adaptors Guide
FC C
onne
ctor
18
FOR MORE INFORMATION CALL +44 (0) 1908 441144
► Connector boots available in different colours ► 90˚ boots to reduce stress on the fibre
and maintain the bending radius ► 45˚ angle boots for bending flexibilit ► Short boots for small diameter cables
► Customized options of boot colours and types for channel identificatio
► 90˚ boots 45˚ angle boots are suitable for data centre applications for optimising cable management
► Short boots are suitable for 1.2mm to 2mm cable diameters and saves space in the patching area when compared to the conventional boots
Features Applications
Ordering Information
Item description Part No.
90°C Angled Boot Blue LC3BLUEBOOT90
90°C Angled Boot Red LC3REDBOOT90
90°C Angled Boot Black LC3BLACKBOOT90
SC 3mm Boot SC3BLUEBOOT
FC 3mm Boot FC3BLUEBOOT
FC 2mm Boot FC2BLUEBOOT
LC 3mm Boot LC3BLUEBOOT
SC/FC 900µm Boot Blue SC9BLUEBOOT
45°C Angled Boot Blue LC3BLUEBOOT45
ST 3mm Boot Red ST3REDBOOT
ST 3mm Boot Black ST3BLACKBOOT
ST 3mm Boot ST3YELLOWBOOT
ST 2mm Boot ST2YELLOWBOOT
ST 900µm Boot ST9YELLOWBOOT
Boots
45° Angled Boot
ST 3mm BootRed & Black
ST 3mm Boot
SC 3mm Boot
FC 3mm Boot ST 2mm
Boot
FC 2mm Boot
LC 3mm Boot ST 900µm
Boot
SC/FC 900µm Boot
Fibre Optic Connectors | Connectors and Adaptors GuideB
oots
Field Installable Connector Components
Field Installable Connector Packaging
Visual Fault Locator Window
19
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Exploded view
Ordering Information
Technical Specificatio
APC Singlemode Multimode
Field Installable ConnectorsLC
Connector
Mechanical Splice “Key”VFL Window
Transparent VFL Window visibly glows when the connector is terminated incorrectly
Incorrectly terminated
Correctly terminated
Boot
LC field installable connectors (FIC) are factory terminated and polished to make fibre terminations fast, easy and reliable. These fibre optic connectors offer terminations in less than 2 minutes without any difficulty and require no epoxy, polishing or crimping. The FIC greatly reduces the installation and set up time. It has a window feature to allow testing with a visual fault locator.
► Polished connector incorporating a mechanical splice ► Available in singlemode and multimode (50/125 and 62.5/125) ► Durable, reliable and superior optical performance ► Compatible with standard LC adaptors ► Termination can be repeated 2-3 times ► Packaging comes with a cable/buffer stripping template ► Complies with IEC, EIA/TIA and Telecordia standards ► Fibre preparation kit available
Features
► Rapid repair of optical networks ► FTTH end user termination
Applications
Description Part No.Multimode PC 62.5/125 Simplex 900µm LC62MM9BGFIC
Multimode PC 62.5/125 Simplex 2mm LC62MM2BGFIC
Multimode PC 50/125 Simplex 900µm LC50MM9BGFIC
Multimode PC 50/125 Simplex 2mm LC50MM2BGFIC
Multimode PC OM3 50/125 Simplex 900µm LCOM3MM9BGFIC
Multimode PC OM3 50/125 Simplex 2mm LCOM3MM2BGFIC
Singlemode PC 9/125 Simplex 900µm LC09SM9BLFIC
Singlemode PC 9/125 Simplex 2mm LC09SM2BLFIC
Singlemode APC 9/125 Simplex 900µm LCA09SM9GNFIC
Singlemode APC 9/125 Simplex 2mm LCA09SM2GNFIC
Field Installable Connector Preparation Kit OPT-FIC-PREPKITField Installable Connector Preparation Kit and Inspection Kit
OPT-FIC-PREPKITPLUS
DescriptionFibre Type Singlemode and Multimode
Insertion Loss ≤ 0.4dB (Typically)
Return Loss (Typical) 50dB/55dB
Polishing Type UPC and APC
Fibre Optic Connectors | Connectors and Adaptors Guide
LC F
ield
Inst
alla
ble
Con
nect
ors
Field Installable Connector Packaging
Field Installable Connector Components
20
FOR MORE INFORMATION CALL +44 (0) 1908 441144
► Polished connector incorporating a mechanical splice ► Available in singlemode and multimode (50/125 and 62.5/125) ► Durable, reliable and superior optical performance ► Compatible with standard SC adaptors ► Termination can be repeated 2-3 times ► Packaging comes with a cable/buffer stripping template ► Complies with IEC, EIA/TIA and Telecordia standards ► Fibre preparation kit available
► Rapid repair of optical networks ► FTTH end user termination
Features
Applications
Ordering Information
SC field-i stallable connectors (FIC) are factory terminated and polished to make fibre terminations fast, easy and reliable. These fibre optic connectors offer terminations in less than 2 minutes without any difficulty and require no epoxy, polishing or crimping. The FIC greatly reduces the installation and set up time. It has a window feature to allow testing with a visual fault locator.
DescriptionFibre Type Singlemode and Multimode
Insertion Loss (Max)* 0.5dB
Insertion Loss (Typical)* 0.3dB
Return Loss (Typical)* 50db/55dB
Polishing Type UPC and APC
*Using proper cleave process
3mm Exploded view
900μm Exploded View
APC Singlemode Multimode
Pigtails
Patchcords
Description Part No.Multimode PC 62.5/125 Simplex 900µm SC62MM9BGFIC
Multimode PC 62.5/125 Simplex 3mm SC62MM3BGFIC
Multimode PC 50/125 Simplex 900µm SC50MM9BGFIC
Multimode PC 50/125 Simplex 3mm SC50MM3BGFIC
Multimode PC 50/125 OM3 Simplex 900µm SCOM3MM9BGFIC
Multimode PC 50/125 OM3 Simplex 3mm SCOM3MM3BGFIC
Singlemode PC 9/125 Simplex 900µm SC09SM9BLFIC
Singlemode PC 9/125 Simplex 3mm SC09SM3BLFIC
Singlemode APC 9/125 Simplex 900µm SCA09SM9GNFIC
Singlemode APC 9/125 Simplex 3mm SCA09SM3GNFIC
Field Installable Connector Preparation Kit OPT-FIC-PREPKITField Installable Connector Preparation Kit and Inspection Kit OPT-FIC-PREPKITPLUS
Field Installable ConnectorsSC
Technical Specificatio
Connector
Connector
Mechanical Splice “Key”
Mechanical Splice “Key”VFL Window
VFL Window
Boot
Boot
Fibre Optic Connectors | Connectors and Adaptors GuideS
C F
ield
Inst
alla
ble
Con
nect
ors
Field Installable Connector Components
Field Installable Connector Packaging
21
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Field Installable ConnectorsST
Exploded view
Connector
Mechanical Splice “Key”VFL Window
Boot
Technical Specificatio
DescriptionFibre Type Singlemode and Multimode
Insertion Loss (Max)* 0.5 dB
Insertion Loss (Typical)* 0.3 dB
Return Loss (Typical)* 50db/55dB
Polishing Type UPC and APC
* Using proper cleave process
APC Singlemode Multimode
ST field installable connectors (FIC) are factory terminated and polished to make fibre terminations fast, easy and reliable. These fibre optic connectors offer terminations in less than 2 minutes without any difficulty and require no epoxy, polishing or crimping. The FIC greatly reduces the installation and set up time. It has a window feature to allow testing with a visual fault locator.
► Polished connector incorporating a mechanical splice ► Available in singlemode and multimode (50/125 and 62.5/125) ► Durable, reliable and superior optical performance ► Compatible with standard ST adaptors ► Termination can be repeated 2-3 times ► Packaging comes with a buffer stripping template ► Complies with IEC, EIA/TIA and Telecordia standards ► Fibre preparation kit available
Features
► Rapid repair of optical networks ► FTTH end user termination ► Hazardous environment termination where
fusion splicing isprohibited
Applications
Ordering Information
Description Part No.Multimode PC 62.5/125 Simplex 900µm ST62MM9BGFIC
Multimode PC 50/125 Simplex 900µm ST50MM9BGFIC
Multimode PC OM3 50/125 Simplex 50/125 900µm STOM3SM9BLFIC
Singlemode PC 9/125 Simplex 900µm ST09SM9BLFIC
Singlemode APC 9/125 Simplex 900µm STA09SM9GNFIC
Field Installable Connector Preparation Kit OPT-FIC-PREPKITField Installable Connector Preparation Kit and Inspection Kit
OPT-FIC-PREPKITPLUS
Fibre Optic Connectors | Connectors and Adaptors Guide
ST
Fiel
d In
stal
labl
e C
onne
ctor
s
SC Adaptors 24
LC Adaptors 25
ST Adaptors 27
FC Adaptors 28
E2000 Adaptors 29
MT-RJ Adaptors 30
SC Shutter Adaptor 31
MPO/MTP 32
Hybrid Adaptors 33
Adaptors
SC Simplex and Duplex Adapters
All dimensions are in millimeters
24
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Our range of high quality SC adaptors have high precision alignment sleeves for reliability and improved reconnectability. For singlemode applications a ceramic sleeve is supplied to ensure a high precision alignment. For multimode applications a phosphor bronze sleeve is supplied. The housing is available in different colours with options for flange or flangeless body, metal clips or inbuilt clips
► Complies with IEC 61754-4 standard ► High precision alignment sleeve ► Blue, green, aqua and erika
violet adaptors supplied with zirconia ceramic sleeve
► Beige adaptor supplied with phosphor bronze sleeve
► Low insertion loss and improved reconnectability
► REACH SvHC compliant ► Materials compliant to RoHS2 ► Available in simplex and
duplex adaptors ► Available in Flanged and
Flangeless options ► Also available are SC simplex
adaptors with a shutter
► Data centres ► Premise installations ► Telecommunication networks ► Ethernet, Fibre channel, ATM,
LAN, MAN and WAN
Features
Applications
Simplex
Duplex
APC Singlemode Multimode
Technical Drawings
Ceramic Phosphor Bronze ConformanceInsertion Loss (Typ) 0.1 dB 0.15 dB IEC 61300-3-4
Mating Durability - 500 IEC 61300-2-2
Receptacle Retention force - 2N - 5.9N IEC 61754-4
Operating temperature - -25 to +70, 12 cycles IEC 61300-2-22
Technical Specificatio
Also available in Aqua
Packed in trays of 25
9.2
9.2
9.75
9.75
22 34.730.7
12.8 25.80
13.3526.25
1830.72.1 2.20
27.4
27.4
1.8 1.
8
2.9
18 12.7Clips designed for a material thickness of 1.6mm Clips designed for a material thickness of 1.6mm
Ø 2.3 Ø 2.3
AdaptorsSC
For Ordering Information see page 34
Fibre Optic Connectors | Connectors and Adaptors GuideS
C A
dapt
ors
25
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Our range of LC adaptors have high precision alignment sleeves for improved reliability and better reconnectability. The LC adaptors come with ceramic sleeves for both singlemode and multimode. The housing is available in different colours with options for flange or flangeless body and metal or inbuilt clips.
► Complies with IEC 61754-20 ► High precision alignment sleeve ► Low insertion loss and high reconnectability ► REACH SvHC compliant ► Materials compliant to RoHS2 ► Available in simplex, duplex and quad adaptors
► Telecommunications networks ► CATV, LAN, MAN and WAN application ► Data processing networks ► Cable television ► Fibre-To-The-Home ► Premises distribution
Simplex
Duplex
APC Singlemode Multimode
Quad
Features
ApplicationsErika Violet and Aqua
colours available
Packed in trays of 25
Flangeless version available
AdaptorsLC
For Ordering Information see page 34
Fibre Optic Connectors | Connectors and Adaptors Guide
LC A
dapt
ors
LC Adaptor
26
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Ceramic ConformanceInsertion Loss (Typ) 0.1 dB IEC 61300-3-4Mating Durability 500 IEC 61300-2-2Receptacle Retention force 1N - 2.5N IEC 61754-20Operating temperature -25 to +70, 12 cycles IEC 61300-2-22
Technical Specificatio
Technical Drawings
12.8
7
12.8
25.85
25.85
34.7
28.5
13
30.7
30.7
22
25.50
11.2
14.60
14.60
15.4
13.25
7.15
13.25
26.25
26.25
Cutout Size
Cutout Size
Cutout Size
Cutout Size
Cutout Size
18
18
29.2
13.2
5
11.5
5
29.2
28.8
28.8
25.8
15.4
9.
5
13
9.4
9.4
9.4
9.4
9.75
11.7
59.
759.
759.
75
All dimensions are in millimeters
For Ordering Information see page 34
13.3
13.3
AdaptorsLC
Fibre Optic Connectors | Connectors and Adaptors GuideLC
Ada
ptor
s
All dimensions are in millimeters
ST Adaptor
27
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Our ST adaptors have high precision alignment sleeves for reliability and better reconnectability. ST adaptors come with a ceramic sleeve for the singlemode adaptor and phosphor bronze sleeve for the multimode adaptor. The simplex housing is available in double D footprint type.
Technical Specificatio
Features
Applications
► Complies with IEC 61754-2 ► Low insertion loss and high
reconnectability capability ► REACH SvHC compliant ► Materials compliant to RoHS2 ► Available in simplex or duplex
► Data processing networks ► Premises distribution
Technical Drawings
Optical Performance Ceramic Phosphor Bronze Conformance
Insertion Loss (Typ) 0.1 dB 0.15 dB IEC 61300-3-4
Mating Durability 500 IEC 61300-2-2
Receptacle Retention Force 2N - 5.9 N IEC 61754-2
Operating Temperature -25 to +70, 12 cycles IEC 61300-2-22
Packed in trays of 25
7.70
12.7
R5
Cutout Size
829.4
Ø 1
.32
13.5
1.30
M9 x 0.75
AdaptorsST
For Ordering Information see page 34
Fibre Optic Connectors | Connectors and Adaptors Guide
ST
Ada
ptor
s
FC Adaptor
28
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Features
Applications
► Complies with IEC 61754-13 and TIA 604-4-A
► High precision alignment sleeve for low insertion loss
► Low insertion loss and high reconnectability
► Narrow key, 2.06mm for APC and PC connectors
► REACH SvHC compliant ► Materials compliant to RoHS2 ► Available in simplex only with DD footprint
► Telecommunications networks ► Local area networks ► Data processing networks ► Cable television ► Premises distribution ► Test and laboratory equipment ► Industrial and military application
We offer a range of high quality FC adaptors featuring precision alignment sleeves for high reliability and better reconnectability. FC adaptors come with ceramic sleeves for singlemode and phosphor bronze sleeve for multimode. The housing has a metal body, a M8 nut and Double D footprint.
Technical Specificatio
Technical Drawings
Ceramic Phosphor Bronze Conformance
Insertion Loss (Typ) 0.1dB 0.15dB IEC 61300-3-4
Mating Durability 500 IEC 61300-2-2
Receptacle Retention Force 2N – 5.9N IEC 61754-13
Operating temperature -25 to +70, 12 cycles IEC 61300-2-22
Square mount available
AdaptorsFC
M8 x 0.75 12mm Nut
6.45
8
2
15 7.55
All dimensions are in millimetres
Ø11
R5
Cutout Size
For Ordering Information see page 34
Fibre Optic Connectors | Connectors and Adaptors GuideFC
Ada
ptor
s
E2000 Adaptor
29
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Features
Applications
► Complies with IEC 61754-15 ► High precision alignment sleeve ► Low insertion loss and
high reconnectability ► RoHS, REACH SvHC compliant ► Available in simplex only ► Genuine Huber+Suhner products ► Genuine Reichle &
De-Massari Products
► Suitable for high power laser applications
► Telecommunications networks ► WDM, DWDM applications ► Testing and measurement equipment
Our high quality E2000 Adaptors which have high precision alignment sleeves for reliability and better reconnectability and an inbuilt mechanism to open the shutter and guide the ferrule in the alignment sleeve. E2000 Adaptors come with a ceramic sleeves for Singlemode and Multimode. The housing is available in blue, green or beige and a flangeless body option
Ceramic ConformanceInsertion Loss (Typ) 0.1 dB IEC 61300-3-4
Mating Durability 500 IEC 61300-2-2
Receptacle Retention force 2N – 5.9N IEC 61754-20
Operating temperature -25 to +70, 12 cycles IEC 61300-2-22
Technical Specificatio
Technical Drawings
All dimensions are in millimeters
AdaptorsE2000
M2 Nut 42.1
19.28
13.35
18
9
13 22.2
18
9.75
Cutout Size
For Ordering Information see page 34
Fibre Optic Connectors | Connectors and Adaptors Guide
E20
00 A
dapt
ors
MTRJ Adaptor
30
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Features
Applications
We offer a choice of MTRJ adaptors for alignment of the MTRJ connectors.
In the case of the MTRJ system the alignment is carried out by two small pins fitted to one of the connectors and the adapter is designed to support and lock the connectors. When joining MT-RJ connectors, one connector must always be male with pins and one must be female without pins.
► Plug-jack (RJ-45) design to IEC 61754-18
► TIA/EIA568-A compliant
► Precision moulded for proper alignment
► Available in black and
► Gigabit Ethernet, Asynchronous Transmission Method (ATM)
► Premise installations
► Industrial and military applications
Technical Specificatio
Technical Drawings
Singlemode Conformance
Insertion Loss (Typ) 0.2dB IEC 61300-3-4
Mating Durability 500 matings IEC 61300-2-2
Vibration Test 10 - 55Hz 0.75 amplitude IEC 61300-2-1
Drop test Drop height 1m, 5 drops IEC 61300-2-12
Operating temperature -25 to +70, 12 cycles IEC 61300-2-22
All dimensions are in millimeters
AdaptorsMT-RJ
28.2
12.6
12.6 18
13.359.35
12.9
17.5
5
9.75
Cutout Size
For Ordering Information see page 34
Fibre Optic Connectors | Connectors and Adaptors GuideM
T- J
R A
dapt
ors
SC Shuttered Adaptor
All dimensions are in millimeters
31
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
SC shuttered adaptor integrates safety features suitable for FTTH and other telecom applications. It has a high precision zirconia alignment sleeve designed for high reliability and excellent reconnectability in all singlemode networks. It has an spring loaded plastic shutter for laser safety and dust protection.
The shutter displays a warning label to indicate laser risk. The adaptors are available in standard colours and packaging.
► Complies with IEC 61754-4, IEC 60784-14 and TIA 604-3
► High precision alignment sleeve ► High quality and durable
shuttered adaptor ► Low insertion loss and
high reconnectability ► RoHS, REACH SvHC ► Available in standard colours
and standard packaging
► Specially designed for Fibre to the home applications
► Telecommunication networks ► CATV, LAN and WAN ► Broadband ► Indoor and outdoor applications
Features
Applications Ceramic ConformanceInsertion Loss (Typ) 0.1dB IEC 61300-3-4
Mating Durability 500 matings IEC 61300-2-2
Receptacle Retention force 2N - 5.9N IEC 61754-4
Vibration Test 10 - 55Hz, 0.75 amplitude IEC 61300-2-1
Drop test Drop height 1m, 5 drops IEC 61300-2-12
Technical Specificatio
Technical Drawings
Please contact our sales department on +44 (0) 1908 441144 for part numbers and lead time.
18
12.1
11.1
13
9.5
9.3
23.9
24.9
28
21.5
17.7
37.4
12.8
14.9
2.1
3
Shuttered AdaptorsSC
For Ordering Information see page 34
Fibre Optic Connectors | Connectors and Adaptors Guide
SC
Shu
ttere
d A
dapt
ors
32
FOR MORE INFORMATION CALL +44 (0) 1908 441144
AdaptorsMPO/MTP
Our MPO/MTP adaptor provides alignment for a male and female MPO/MTP connector. The housing is available with MTP or SC footprint, aligned or opposed alignment keys, different colours and with options for flange or
flangeless body. The adaptor body material is polyetherimide with a stainless steel spring clip.
Features
► Complies with IEC 61754-7 ► REACH SvHC compliant ► Materials compliant to RoHS2 (2011/65/EU) ► Available in simplex flange and flangele ► Available with SC simplex or MTP footprint
Applications ► Datacentre networks ► Telecommunications networks ► Data processing networks ► Cable television ► Fibre-To-The-Home ► Premises distribution
Technical Specificatio
Description Conformance
Insertion Loss (Typ) 0.1 dB IEC 61300-3-4
Mating Durability 500 IEC 61300-2-2
Operating Temperature -25 to +70, 12 cycles IEC 61300-2-22
For Ordering Information see page 34
Fibre Optic Connectors | Connectors and Adaptors GuideM
PO
/MP
T A
dapt
ors
33
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
E2000 Male
ST Male
ST Female ST Female(Plastic)
SC Female(Plastic)
ST Duplex Female
ST Duplex Female(Plastic)
SC Duplex Female(Plastic)
LC Female(Plastic)
FC Male
LC Male
FC Female FC Female(Plastic)
SC Female
LC Male
LC Female
SC Male
SC Female
SC Duplex Female
LC Male to
SC Female
Example: LC Male to SC Female Hybrid Adaptor
SC Male to
LC Female
ST Female to
SC Female
SC Duplex Female to
LC Duplex Female
LC Duplex Female
Hybrid adaptors are used for mating 2 different style connectors. Our hybrid adaptors conform to international standards, are quality tested, and
are available in singlemode, multimode and many different connector-type configurations
Features
Examples
► Complies with IEC, TIA/EIA, Telcordia standards ► High precision alignment sleeve ► Low insertion loss and high reconnectability ► REACH SvHC compliant ► Materials compliant to RoHS2 ► Available in plastic or metal body
Applications ► Telecommunications networks ► Local area networks ► Data processing networks ► Cable television ► Premises distribution ► Test and laboratory equipment ► Industrial and military application
AdaptorsHYBRID
FC Duplex Female
FC Duplex Female(Plastic)
Fibre Optic Connectors | Connectors and Adaptors Guide
Hyb
rid A
dapt
ors
34
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Ceramic Phosphor Bronze Conformance
Insertion Loss (Typ) 0.1 dB 0.15 dB IEC 61300-3-4
Mating Durability 500 IEC 61300-2-2
Receptacle Retention Force 2N – 5.9N IEC 61754-13
Operating Temperature -25 to +70, 12 cycles IEC 61300-2-22
Technical Specificatio
Ordering Information
AdaptorsHYBRID
Male to Female Adaptors Part Number
Adaptor HYB - LCFCA Male to female - ZR-SX No clip STD LCFCAMF09Z1N
Adaptor HYB - LCSC Male to female - ZR-SX No clip STD LCSCMF09Z1N
Adaptor HYB - LCSCA Male to female - ZR-SX No clip STD LCSCAMF09Z1N
Adaptor HYB - SCFC Male to female - ZR-SX No clip STD SCFCMF09Z1N
Adaptor HYB - SCLC Male to female - ZR-SX No clip STD SCLCMF09Z1N
Adaptor HYB - SCLCA Male to female - ZR-SX No clip STD SCLCAMF09Z1N
Adaptor HYB - FCSC Male to female - ZR-SX No clip STD FCSCMF09Z1N
Adaptor HYB - FCLC Male to female - ZR-SX No clip STD FCLCMF09Z1N
Adaptor HYB - STSC Male to female - ZR-SX No clip STD STSCMF09Z1N
Adaptor HYB - STLC Male to female - ZR-SX No clip STD STLCMF09Z1N
Adaptor HYB - E2SC Male to female - ZR-SX No clip STD E2SCMF09Z1N
Adaptor HYB - E2LC Male to female - ZR-SX No clip STD E2LCMF09Z1N
Adaptor HYB - E2SCA Male to female - ZR-SX No clip STD E2SCAMF09Z1N
Adaptor HYB - E2LCA Male to female - ZR-SX No clip STD E2LCAMF09Z1N
Female to Female Adaptors - PC Simplex Part Number
Adaptor HYB - SCST Metal body - ZR-SX No clip STD SCSTADSZ1NOMB-S
Adaptor HYB - LCST Metal body - ZR-SX No clip STD LCSTADSZ1NOMB-S
Adaptor HYB - FCSC Metal body - ZR-SX No clip STD FCSCADSZ1NOMB-S
Adaptor HYB - LCSC Metal body - ZR-SX No clip STD LCSCADSZ1NOMB-S
Adaptor HYB - FCLC Metal body - ZR-SX No clip STD FCLCADSZ1NOMB-S
Female to Female Adaptors - APC/APC Simplex Part Number
Adaptor HYB - FCSC APC Metal body - ZR-SX No clip STD FCSCADAZ1NOMB-S
Adaptor HYB - LCSC APC Metal body - ZR-SX No clip STD LCSCADAZ1NOMB-S
Adaptor HYB - FCLC APC Metal body - ZR-SX No clip STD FCLCADAZ1NOMB-S
Female to Female Adaptors - PC/PC Duplex Part Number
Adaptor HYB - FCSC Metal body - ZR-DX No clip STD FCSCADSZ2NOMB-S
Adaptor HYB - LCSC Metal body - ZR-DX No clip STD LCSCADSZ2NOMB-S
Fibre Optic Connectors | Connectors and Adaptors GuideH
ybrid
Ada
ptor
s
35
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Adaptor Ordering Information
Mode Type Colour Simplex part No. Duplex Part No.
SM APC Green SCAPCUSGREEN SCAPCUDGREEN
SM PC Blue SCUSZR02 SCUDZR02
MM PC Beige SCUSPHBRBEIGE SCUDPHBRBEIGE
MM PC Aqua SCSMPXAQUA SCDPXAQUA
MM PC Erika Violet SCSMPXEV SCDPXEV
SC Adaptors
For Flangeless adaptors add “/FL” to the part number - for example:
SCUSZR02/FL
Flange* with two holes and SC duplex footprint with metal clips
Mode Type Colour Part No.
SM APC Green LCQUADGREEN-W
SM PC Blue LCQUADBLUE-W
MM PC Beige LCQUADBEIGE-S
MM PC Aqua LCQUADAQUA-W
MM PC Erika Violet LCQUADEV-W
Flange* with two holes and SC duplex footprint with metal clips
Mode Type Colour Part No.
SM APC Green LCAPCUDGREEN
SM PC Blue LCDPXBLUE
MM PC Beige LCDPXBEIGE
MM PC Aqua LCDPXAQUA
MM PC Erika Violet LCDPXEV
Flangeless with RJ45 footprint with inbuilt clips
Mode Type Colour Part No.
Blue LCUDZR02
* For ordering a flangeless version of the adaptor, please add FL at the end of the code provided above.For example: LCDPXAQUA/FL will refer to a duplex multimode, LC adaptor in aqua colour, flangeless with
metal clips.
LC Adaptors
Mode Type Mode Part No.
SM PC Simplex STUZR02
MM PC Simplex STUPHBR
SM PC Duplex STUDZR02METAL
MM PC Duplex STUDPHRBEIGE
SM PC Duplex STUDZR02BLUE
ST Adaptors
Description Part No.
DD mount type - Singlemode APC FCAPCUZRO2-DD
DD mount type - Singlemode PC FCUZRO2-DD
DD mount type - Multimode PC FCUPHBR-DD
Square mount type - Singlemode APC FCAPCUZR02SQUARE
Square mount type - Singlemode PC FCUZR02SQUARE
Square mount type - Multimode PC FCUPHBRSQUARE
FC Adaptors
Description Part No.
Flange with two holes and SM PC Blue E2UBLUE SC footprint
Singlemode APC - Green E2APCUGREEN
Singlemode PC - Blue E2UBLUE
Multimode PC - Beige E2UBEIGE
Flangess with SC footprint
Singlemode APC - Green E2APCUGREEN/FL
Singlemode PC - Blue E2UBLUE/FL
Multimode PC - Beige E2UBEIGE/FL
E2000 Adaptors
Description Part No.
Multimode - Beige MTRJUNITER
Multimode - Black MTRJ-BLK
MTRJ Adaptors
Keyway Colour Part No.
Flange with two holes and SC simplex footprint
Aligned (Up-Up) Grey ADMTPMTPSCSXGY
Opposed (Up-Down) Black ADMTPMTPSCSXBK
Reduced flange with SC simplex footprint
Aligned (Up-Up) Grey ADMTPMTPSCSXGYRF
Opposed (Up-Down) Black ADMTPMTPSCSXBKRF
Flange with two holes and MPO/MTP footprint
Aligned (Up-Up) Grey ADMTPMTPXXBK6B
MPO/MTP Adaptors
Other MPO/MTP adaptors available on request
Mode Type Colour Simplex Duplex
SM APC Green SCAPCUSGREEN SCAPCUDGREEN
SM PC Blue SCUSZR02 SCUDZR02
MM PC Beige SCUSPHBRBRIGE SCUDPHBRBEIGE
MM PC Aqua SCSMPXAQUA SCDPXAQUA
MM PC Erika Voilet SCSMPXEV SCDPXEV
SC Adaptors
Fibre Optic Connectors | Connectors and Adaptors Guide
Ord
erin
g In
form
atio
n
Connectors and Adaptors Catalogue
Related ProductsPatch Cable 38
Termination and Installation Tools 41
Field Installable Connector Preparation 42
Termination and Installation Tools 43
Test and Measurement 44
Cleaning Products 45
FOR MORE INFORMATION CALL +44 (0) 1908 441144
38
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Simplex fibre optic patch cable is ideal for use in office LAN connections, patch cords, pigtails and internal point-to-point links where frequent handling is likely (e.g. data cabinets, equipment rooms, user outlets). Utilising 600µm or 900µm buffered fibre, the cable is suitable for use with industry standard connectors and can be easily made into a patch cords.
Product Description Part No.
OM1 62.5/125 µm Multimode1-Core 2.0mm/600µm OM1SIMOR2MM6-C1-Core 3.0mm/900µm OM1SIMOR-C
OM2 50/125 µm Multimode1-Core 2.0mm/600µm OM2SIMOR2MM6-C1-Core 3.0mm/900µm OM2SIMOR-C
OM3 50/125 µm Multimode1-Core 2.0mm/600µm OM3SIMAQ2MM6-C1-Core 3.0mm/900µm OM3SIMAQ-C
OM4 50/125 µm Multimode1-Core 2.0mm/600µm OM4SIMAQ2MM6-C1-Core 3.0mm/900µm OM4SIMAQ-C
OS1/OS2 9/125 µm Singlemode1-Core 2.0mm/600µm OS1SIMYE2MM6-C1-Core 3.0mm/900µm OS1SIMYE-C
Description 1-core Lszh
1-core Lszh
1-core Lszh
1-core Lszh
1-core Lszh
Outer Diameter mm 1.6 1.8 2 2.4 3
Weight kg/km 2.9 3.2 3.5 5 6.8
Max. Load (installation) N 70 80 80 100 125
Max. Load (installed) N 35 40 40 50 60
Min. Bend Radius (installation)
Times Diameter 20 20 20 20 20
Min. Bend Radius (installed)
Times Diameter 10 10 10 10 10
Fire Performance LSZH LSZH LSZH LSZH LSZH
Operating Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Storage Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60 -20~+60
Crush Resistance N/100mm 500 500 500 500 500
Simplex Fibre Patch Cable
Ordering InformationTechnical Specificatio
Description
LSZH JacketTight Buffer Fibre
Aramid Yarn Strength Member
Standard Length
Internal
Fire Retardant
Applications ► Patchcords ► Pigtails ► Internal inter-connections
Features ► Choice of fibre types ► Choice of cable outer diameters ► High strength aramid yarn strength members for ease of handling ► Robust 600µm or 900µm tight buffered fibres for ease of termination ► Easy jacket stripping ► LSZH jacket for internal use
Fibre Optic Connectors | Connectors and Adaptors GuideFi
bre
Pat
ch C
ords
39
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COMFOR MORE INFORMATION CALL +44 (0) 1908 441144
Zip Duplex fibre optic patch cable is constructed with two simplex units joined together with a central web. Ideal for use in office LAN connections, patch cords, pigtails and internal point-to-point links where frequent handling is likely (e.g. data cabinets, equipment rooms, user outlets). Utilising 600µm or 900µm buffered fibre, the cable is suitable for use with industry standard connectors and can be easily made into a patch cord.
Product Description Part No.
OM1 62.5/125 µm Multimode2-Core 2.0mm OM1ZIPOR2MM6-C2-Core 2.8mm OM1ZIPOR-C
OM2 50/125 µm Multimode2-Core 2.0mm OM2ZIPOR2MM6-C2-Core 2.8mm OM2ZIPOR-C
OM3 50/125 µm Multimode2-Core 2.0mm OM3ZIPAQ2MM6-C2-Core 2.8mm OM3ZIPAQ-C
OM4 50/125 µm Multimode *2-Core 2.0mm OM4ZIPAQ2MM6-C2-Core 2.8mm OM4ZIPAQ-C
OS1/OS2 9/125 µm Singlemode2-Core 2.0mm OS1ZIPYE2MM6-C2-Core 2.8mm OS1ZIPYE-C
Description 2-core Lszh
2-core Lszh
2-core Lszh
2-core Lszh
Outer Diameter mm 1.6*3.3 1.8*3.7 2.0*4.1 2.8*5.7
Weight kg/km 5.7 6.7 8.2 13.2
Max. Load (installation) N 160 160 200 300
Max. Load (installed) N 80 80 100 160
Min. Bend Radius (installation)
Times Diameter 20 20 20 20
Min. Bend Radius (installed)
Times Diameter 10 10 10 10
Fire Performance LSZH LSZH LSZH LSZH
Operating Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Storage Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Installation Temp. °C -20~+60 -20~+60 -20~+60 -20~+60
Crush Resistance N/100mm 1000 1000 1000 1000
Zip Duplex Fibre Patch Cable
Ordering InformationTechnical Specificatio
Description
Other diameters are available upon requestRBS multimode available on request* Also available in Erika Violet
Fire Retardant
Internal
Standard Length
Applications
Features
► Patchcords ► Pigtails ► Internal inter-connections
► Choice of fibre type ► Choice of outer diameter ► High strength aramid yarn strength members for ease of handling ► Robust 600µm or 900µm tight buffered fibres for ease of termination ► Easy stripping ► LSZH jacket for internal use
LSZH Jacket
Aramid Yarn Strength Member
Tight Buffer Fibre
Fibre Optic Connectors | Connectors and Adaptors Guide
Fibr
e P
atch
Cor
ds
40
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Pre-terminated cables are available in a wide range of
lengths.
Please call the sales team on 44 (0)870 127 3330
for more details.Alternatively download a copy of our
pre-terminated cable cataloguefrom www.fibrefab.co
DescriptionFlat duplex fibre optic patch cable is constructed with two simplex units held together with an overall LSZH jacket. Ideal for use in office LAN connections, patch cords, pigtails and internal point-to-point links where frequent handling is likely (e.g. data cabinets, equipment rooms, user outlets).
Utilising 900µm buffered fibre, the cable unit is suitable for use with industry standard connectors and can be easily made into a patchcord.
Product Description Part No.OM1 62.5/125 µm Multimode
2-Core 2.0mm OM1FLATORANGE2-C2-Core 2.8mm OM1FLATORANGE-C
OM2 50/125 µm Multimode2-Core 2.0mm OM2FLATORANGE2-C2-Core 2.8mm OM2FLATORANGE-C
OM3 50/125 µm Multimode2-Core 2.0mm OM3FLATAQUA2-C2-Core 2.8mm OM3FLATAQUA-C
OM4 50/125 µm Multimode *2-Core 2.0mm OM4FLATAQUA2-C2-Core 2.8mm OM4FLATAQUA-C
OS1/OS2 9/125 µm Singlemode2-Core 2.0mm OS1FLATYELLOW2-C2-Core 2.8mm OS1FLATYELLOW-C
Description 2-core Lszh 2-core LszhOuter Diameter mm 3.0 x 5.0 3.8 x 6.6Weight kg/km 11 24Max. Load (installation) N 250 250Max. Load (installed) N 125 125Min. Bend Radius (installation)
Times diameter 20 20
Min. Bend Radius (installed)
Times diameter 10 10
Fire Performance LSZH LSZHOperating Temp. °C -20~+60 -20~+60Storage Temp. °C -20~+60 -20~+60Installation Temp. °C -20~+60 -20~+60Crush Resistance N/100mm 1000 1000
Flat Duplex Fibre Patch Cable
Ordering InformationTechnical Specificatio
Other diameters are available upon requestRBS multimode available on request* Also available in Erika Violet
Fire Retardant
Internal
Standard Length
LSZH JacketSimplex LSZH Jacket
Tight Buffer Fibre
Aramid Yarn Strength MemberRip Cord
Applications
Features
► Patchcords ► Pigtails ► Internal inter-connections
► Choice of fibre type ► Choice of outer diameter ► High strength Aramid yarn strength members for ease of handling ► Easy to strip ► LSZH jacket ► LSZH overall jacket
Fibre Optic Connectors | Connectors and Adaptors GuideFi
bre
Pat
ch C
ords
41
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Tri Hole Stripper
This hard wearing, easy to handle fibre optic stripping tool includes three stripping guides for: 2mm outer jacket, 900µm Buffer, and 250µm acrylic coating, Safety catch and factory set adjuster.
Description Part No.Easy handle stripper OPT-FOS
Carbide Pen Cleaver
This well presented pen-style scribe, uses a 30° wedge shaped carbide tip. Its design makes for quick and precise cleaving of optical fibre
Description Part No.Carbide pen cleaver OPT-CPC
Jacket Stripper
Ideal for stripping jackets from backbone cable between 4.5mm and 25mm in diameter. A small rotating blade accurately splits the circumference of the jacket, then by flicking a switch, the same blade will rotate 90° and is used to split the jacket down one side for easy removal.
Description Part No.Jacket stripper OPT-CS
Kevlar Shears
These light-weight shears are ideal for cutting the Kevlar® strength members found in fibre optic cables. Ergonomic, molded handles provide comfort for both right and left-handed users. The one micro-serrated blade reduces slipping for more positive cutting action. Length: 140mm Weight: 79g.
Description Part No.Kevlar® Scissors OPT-KS
Universal Crimp Tool
This professional ratchet-style crimping tool is constructed of solid steel. The rubber handle provides a firm grip and includes a ratchet mechanism for consistent crimping.
Crimp Specification : .78” / .151” / .128” / .78” / .068” / .042” (4.52 / 3.84 / 3.25 / 2.0 / 1.72 / 1.07mm)
Description Part No.Fibre Optic Crimp Tool OPT-FOCT
Termination and Installation Tools
OPT-FOS
OPT-CPC
OPT-CS
OPT-KS
OPT-FOCT
Fibre Optic Connectors | Connectors and Adaptors Guide
Term
inat
ion
and
Inst
alla
tion
Tool
s
Terminating Field Installable Connectors
42
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Description Part No.Field Installable Connector Preparation Kit OPT-FIC-PREPKITField Installable Connector Preparation Kit and Inspection Kit
OPT-FIC-PREPKITPLUS
Optronics field-installable connectors make fibre terminations fast, easy and reliable. These fibre optic connectors offer terminations in less than five seconds without any hassle and require no epoxy, polishing or crimping.
To accompany these connectors, we can also supply all the items needed for their preparation in a handy tool kit. The kit comes complete with all the tools to strip, clean and cleave the fibre.An enhanced preparation kit also contains a visual fault locator for continuity checking and a hand held inspection scope to ensure the connector is free from potentially harmful dirt and contamination.
Field Installable Connector Preparation Kit
Kit Contents
Ordering Information
Item Quantity
FibreCare Fibre Preparation Fluid FPF03M - 3oz Pump Bottle 1
Kevlar scissors 1
High Performance Precision Cleave Tool 1
Optronics Soft Carry Case 1
Lint Free Cleaning Tissue - 100x100mm - Pack of 100 1
Hand held Fibre Inspection Scope 200x - inc. 2.5mm/1.25mm 1Optronics Mini Visual Fault Locator 650nm - 2.5mm Universal Adaptor (OPTVFL-MINI)* 1
1.25mm Adaptor for Optronics Visual Fault Locator (OPTVFL-2-ADPT1.25)* 1
Fibre Optic Stripper tool 1
Marker Pen 1
* OPT-FIC-PREPKITPLUS only
Step one
Strip fibre : Strip and cleave the fibre according to the template provided.
Insert fibre : Insert the pre-prepared fibre carefully in to the connector body, gently push the fibre towards the body until it stops.
Activate tab : Ensure that the fibre has a bend, then, using your index finger, press the button-like activator tab to commence the splice and crimp. Keeping the tab pressed while slowly releasing the bent fibre
BendTab
Remove the jig : Remove the plastic jig attached to the underside of the connector.
Complete the assembly: Tighten the screw-on boot to the terminated assembly. If there is an aramid strength member, trap it in the screw-thread and trim.
Step two
Step three
Step four
Step fiv
Fibre Optic Connectors | Connectors and Adaptors GuideFi
eld
Inst
alla
ble
Con
nect
or P
repa
ratio
n K
it
Terminating Field Installable Connectors
43
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Image viewed through coaxial illumination Left slide shows contaminant detailRight slide shows clean connector
Hand Held Inspection Microscope
The OPT-FHS series hand-held fibre inspection microscopes, available in 200X and 400X magnification, are an ideal choice for checking field terminations for fibre end face quality. A combination of durable construction, comfortable design, easy operation and quality optics ensures that this tool will enhance the performance of installation and maintenance staff. The OPT-FHS scopes are designed with a professional grade coaxial illumination system. This maximizes the detail seen by the users, because the light travels along the same axis as the end face making even finescratches and contaminates easily visible.
Description Part No.200 x Coaxial Illumination Hand Held Fibre Scope OPT-FHS-200X400 x Coaxial Illumination Hand Held Fibre Scope OPT-FHS-400X
OPT-FHS
Video Fibre Inspection Probe (OPT-VFIP-V2)
The Optronics Video Fibre Inspection Probe (OPT-VFIP) is the perfect tool for ensuring that fibre optic connector end faces are clean and clear from dirt and contamination; the number one cause of network failure. The lightweight, compact probe fits comfortably in the palm of the hand or can be strapped on to your wrist and with single-handed focusing it is easy to establish a clear, sharp image of the connector end face. The probe uses coaxial illumination to show a greater level of detail with an optical resolution of 0.75 µm. The rugged hand held video display unit has a 2.6” LCD screen and is operated using an easy to navigate menu system. The unit accepts micro SD memory cards for images or video data storage of contaminated or cleaned connector end faces. The interchangeable inspection tips facilitate the inspection of both unmated connectors and connectors installed in patch panels or inside hardware devises.
Description Part No.Optronics Hand held Video Fibre Inspection Probe with Image Capture
OPT-VFIP
Adapter for OPT-VFIP 1.25mm PC Connectors (Male) OPT-VFIP-1.25Adapter for OPT-VFIP - ST PC Connectors (female) OPT-VFIP -STAdapter for OPT-VFIP - MU PC Connectors (female) OPT-VFIP- MUAdapter for OPT-VFIP - E2000 PC Connectors (female) OPT-VFIP- E2
Termination and Installation Tools
Pen-style Visual Fault Locator (OPTVFL-2)
The OPTVFL-2 is a slim-line, compact visual fault locator, designed to troubleshoot faults on fibre optic cables. It’s light-weight, pen style makes it ideal for the installer to carry with them on site. The OPTVFL-2 is an excellent addition to an engineers tool set because it can locate broken fibre inside the OTDR’s dead-zone. Being portable and light it lends itself to other applications, including end-to-end continuity checks, identifying connectors in patch panels, and identifying fibres during splicing operations. The universal connector interface provides fast operation with many connector styles, without the need to change adapters.
Description Part No.Optronics Pen-style Visual Fault Locator OPTVFL-21.25mm adapter for OPTVFL-2 OPTVFL-2 ADPT1.25
OPTVFL-2
Fibre Optic Connectors | Connectors and Adaptors Guide
Term
inat
ion
and
Inst
alla
tion
Tool
sOPT-VFIP-V2
44
FOR MORE INFORMATION CALL +44 (0) 1908 441144
Test and MeasurementM210 Multifunction Micro OTDR
The M210 and M310 are the only inspection ready QUAD OTDRs that combine OTDR, OPM and VFL capability with a proven, easy-to-use and easy-to-learn user interface. The M210 offers the intuitive Touch and Test user interface in a rugged, lightweight, easy-to-hold package ready for fielduse. The M210 features a powerful processing engine, a high resolution display and, for the first time in an OTDR of its size, an integrated Optical Power Meter.
Touch and Test simplifies the M210 user experience, minimizes human errors and reduces training time by providing one-touch access to the Full-Auto, Expert and Real-Time OTDR test modes, OPM measurement mode as well as the Results Management and Job Creation menus. The M210 allows setting Pass/Fail thresholds to industry standard TIA, ISO or user-values and will automatically alert users of failing fibres. Touch and Test enables both experts and novices alike to complete jobs more accurately and in less time.
M310 Enterprise OTDR
Enterprise networks have evolved in ways that create more demanding testing of optical cables. This requires an OTDR that can accurately locate and measure closely spaced events on high speed networks. The M310 has the short dead zones required to test these networks. The large number of cable runs in modern enterprise networks and data centers, requires automated detection and measurement of all events in each cable. The M310 provides accurate and reliable event analysis for these critical networks. The M310’s Enhanced Event Analysis software is a product of extensive research into the properties of fibre optic cable events and provides a new level of accuracy and reliability in field test equipment.
The M310 OTDR operates at 850nm and 1300nm multimode and 1310nm and 1550nm single mode and is optimized for testing, analyzing and troubleshooting enterprise, data center, LAN/WAN, campus and military fibre networks
Rugged, lightweight and easy to hold, the M310 has a Touch and Test user interface that makes it easy for experts and novices to test and document fibre networks accurately and quickly. With an integrated, Optical Power Meter and Visual Fault Locator the M310 provides complete Tier 1 insertion loss and Tier 2 OTDR testing. Using pre-set Industry ISO and TIA standards or user set Pass/Fail thresholds, technicians are alerted to installation problems and failures. The M310 can be ordered with an Advanced Analysis software option that includes Macro/Microbend detection and Bi-directional trace analysis.
End face inspection can be performed using the optional DFS1 Digital Fibre Scope. OTDR traces , OPM measurements and fibre endface images can be saved together in a job and downloaded to a computer for analyzing and editing using the included Test Results Manager, TRM® 2.0 application software.
Description Part No.Optronics M310 QUAD OTDR, 850/1300/1310/1550 nm, OPM, VFL
OP-M310-25U-01
Description Part No.M210 QUAD OTDR, 850/1300/1310/1550 nm, OPM, VFL OP-M210-25U-01
M210
M310
Includes SC, FC and ST OTDR Port Adaptors and SC and 2.5mm Universal OPM Port Adaptors
Inclut adaptateurs SC, FC ,ST, SC et adaptateur universal 2.5mm pour OPM
Fibre Optic Connectors | Connectors and Adaptors GuideTe
st a
nd M
easu
rem
ents
45
FOR MORE INFORMATION CALL +44 (0) 1908 441144 VISIT US ONLINE NOW WWW.FIBREFAB.COM
Cleaning Products Lint Free Tissues
Lint free tissues are a versatile consumable for many applications. They are mainly used to clean bare fibre as part of the termination or splicing process.
The lint free characteristic allows them to be used for a multitude of other purposes such as cleaning optical equipment and preparing work surfaces.
IPA Wipes
The Optronics pre-saturated wipes contain 99% pure IPA or isopropyl alcohol. The wipe material is made from a high quality, non-abrasive, lint free fabric.
They can efficiently remove dust, grease, oil, flux, soils and other contaminants and residues from substrates prior to bonding such as bare optical fibre during a termination or splicing process.
Foam Buds
Foam buds are the ideal consumable for cleaning bulkheads after installation. They are used to clean the end faces of installed connectors, from inside the enclosure. The snug fit from the foam head will also remove any contaminants found inside the adapter.
Description Part No.2.5mm foam buds (100pcs) CLEANBUDS
Micro Sticks
Micro fibre sticks are the ideal consumable for cleaning 1.25mm bulkheads after installation. They can be used to clean the end faces of installed connectors, from inside the enclosure.
Cleaning is achieved by inserting the micro fibre tip inside the adapter’s aperture and twisting once. The micro fibre material allows the user to clean installed connector end faces without scratching the surface, and ensures a perfect clean first time
Description Part No.Optronics Lint free cleaning tissues 100x100mm- Pack of 100
CLEANTISSUE/100
Optronics Lint free cleaning tissues 100x100mm- Pack of 400
CLEANTISSUE/400
Description Part No.IPA saturated wipes 50pcs CLEANWIPES
Description Part No.100 1.25mm micro fibre stick CLEANSTICKS
CLEANTISSUE
CLEANWIPES
CLEANBUDS
CLEANSTICKS
Fibre Optic Connectors | Connectors and Adaptors Guide
Cle
anin
g P
rodu
cts
Technical InformationConnector Performance 47
2500
2000
500
000
500
00 500 1000 1500 2000 2500
Final Eccentricity = 1.02 microns Angle = 106 Degree from NorthVariance = +/- 0.006 microns
Blue Circle: 2.5 micronsCalibration factor: 4.4 pixels
VISIT US ONLINE NOW WWW.FIBREFAB.COM
Connector Performance
FibreFab connectors and adaptors are subjected to reliability and performance testing in a programme including type approval and continuous monitoring. When terminated using best practices, typical optical performance meets or exceeds the stated performance and will meet appropriate standards including IEC 61755-3-1/2, ISO/IEC 11801 and TIA/EIA 598.
Production quality control procedures monitor all critical parameters including ferrule OD, ID, roundness and concentricity. A unique, in-house developed concentricity test set is used to inspect ferrules and terminated assemblies. Our products conform to LSZH, OFNR and OFNP material classificationsand to the material requirements of the RoHS directive and REACH SvHC regulations.
Parameter CriteriaRADIUS (PC) 5 - 30µ
RADIUS (APC) 5 - 12µ
APEX 0 - 70µ
UNDERCUT -100 TO + F(R,A)
Concentricity test
1900
580
117
175
233
291
350Y (µm)X (µm)
0
131
262
1300
700
100
-500
Hei
ght (
mm
)
End Face geometry
Terminated connectors are tested for insertion loss (master lead/ random mating) and reflection loss which follows the IEC 61300-3-4/34 and IEC 61300-3-6 standards. FibreFab has developed a proprietary random mating simulation tool which gives a strong insight into the complex interaction between the factors including ferrule and fibre dimensions, end face geometry, polish surface finish and axial contact force for the master lead test and the random mating test. The random mating tests gives a good indication about the average test results and the worst case performance results which depend on the above factors.
Fibre Optic Connectors | Connectors and Adaptors Guide 47
Con
nect
or P
erfo
rman
ce
Find the FibreFab app by visiting the App Store or Google Play store and searching for FibreFab.
App features: Latest News, Up To Date Catalogues, Live Chat and Video Tutorials
Revision 1.6 ©FibreFab 2015 All Rights Reserved E&OE FFCONANDADAPTORCAT
Products covered by GB and other patents and/or patents applied for: Pre-Terminated Cable Breakout Module, UHD Modular System and Shuttered Quad Adaptor FibreFab, and FirstLight™ are trademarks of FibreFab Ltd
FibreFab General Trading LLC Main Office 1601, Room 160248 Burj Gate, Sheik Zayed RoadPO Box 378978DubaiUnited Arab EmiratesTel: +971 4 404 9606 Fax: +971 4 404 9607Email: [email protected]
FibreFab Asia Pacific 7D, Block A, Hongsong Building Tairan 6th Road, Futian, Shenzhen China.Tel: +86 755 2561 3694Fax: +86 755 2561 3697E-mail: [email protected] www.fibrefab.cn
FibreFab Group and UK Headquarters
FibreFab LtdDavy Avenue, Knowlhill, Milton Keynes, MK5 8ND,United Kingdom.Tel: +44 (0) 1908 441144Fax: +44 (0) 1908 441133E-mail: [email protected]
UK Manufacturing Plant
FibreFab LtdBoundary Road, HaverhillSuffolk, CB9 7YH,United Kingdom.Tel: +44 (0) 1908 441144Fax: +44 (0) 1908 441133E-mail: [email protected]
Dubai United States of America China
Search for FibreFab or visitwww.fibrefab.com/linkedi
Search for FibreFab or visitwww.fibrefab.com/twitte
Search for FibreFab or visitwww.fibrefab.com/youtub
Search for FibreFab or visitwww.fibrefab.com/googl
FiberFab Inc.260 Parkway East,Duncan.SC 29334USATel: +1 800-790-9932E mail: [email protected] www.fiberfabinc.com