of 1 /1
Front cover BACK cover FO LD FO LD FO LD Wireless Made Simple. RECORDING FROM SMART DEVICE + MONITOR MOTION RECORDING FROM MONITOR 1 From Pop-Up menu, tap the following icons 2 Tap the camera’s Sensitivity to OFF, LOW or HIGH. 3 To set up EMAIL ALERT, tap the following icons from the pop-up menu, ﬁll in the information ﬁelds and tap OK to save, then < to return to the previous screen. Tap on the SMTP Server ﬁeld. Enter smtp.gmail.com Tap SMTP Port: Enter 465 Tap USERNAME: Enter your Gmail username. Tap PASSWORD: Enter your Gmail password. EMAIL TO: Enter the email address you want the alerts to go to. (This can be different than the SMTP outgoing email account.) FROM SMART DEVICE 1 SNAPSHOTS: From LIVE VIEW , tap SNAPSHOT Icon to capture screen images from camera selected. Snapshots will be saved to camera roll of your mobile device. 2 RECORDING: Tap RECORD icon to save video to the system’s SD Card. LIVE VIEW System 1 (Live Video) Connected 640x480 P2P, No1, 12.67FPS Phillips head screwdriver or drill may be required for installation 7” Touch screen Monitor (2) Outdoor cameras with multi-position brackets (3) AC power adapters (2) Power extension cables One 8 GB SD card Screw/Anchor Kit x3 7” x2 IN THE BOX x2 Let’s Get Started Model AWS3155 8 GB For detailed installation and setup, please refer to the Model AWS3155 complete User’s Guide available on our website: www.ALCWireless.com/support SCAN TO VIEW COMPLETE USER’S GUIDE ALCWireless.com Wireless Made Simple. Quick Simple Set Up Tools NOTE: Do not submerge in water or use monitor near water. STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce the risk of ﬁre, electric shock and injury to persons. Illustrations are for reference only. Actual product speciﬁcations may vary. For additional precautions and product information, please see owner’s manual at www.ALCWireless.com/support 7" Touch Screen Wireless Surveillance System Remote Monitoring Anytime from Anywhere QUICK START GUIDE Model AWS3155 1 2 3 PAIRING ADDITIONAL CAMERAS TO MONITOR The Wireless Surveillance System supports up to four (4) wireless surveillance cameras. Use the following steps to pair each additional camera. From the Main Menu on the Monitor, select the CAMERA SET UP icon Select camera station to be paired Tap the CAMERA STATION you want to pair; a 60-second timer will start. Within 60 seconds, press the PAIRING KEY once on the camera’s power cord. The timer will stop when the camera is paired. Go to Home Screen to view live cameras on the Monitor. AC power cable Camera In-line Pairing Button MONITOR SETUP 1 2 4 3 Connect the AC/DC adapter to the power input on the rear of the Monitor and plug into an electrical outlet. Extend the antenna. Press and hold the POWER button on the top of the monitor for 3-4 seconds until screen illuminates. The CAMERA(s) installed and plugged in will AUTOMATICALLY APPEAR on the Monitor, with or without Internet cable connected to a wireless network router. For remote viewing on smart devices, the Monitor must be connected to Internet. Plug one end of the provided Internet cable into back of Monitor and the other end into an Ethernet port on router. To prepare for RECORDING, insert the micro SD card provided into the micro SD card slot on right side of the Monitor. Most SD card brands are supported up to 32 GB. The SD Card status icon on Monitor will indicate proper installation. SD Card Status Internet Connection status Recording Status Camera Number Signal Status On-screen Display NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is recommended to install camera under shelter to protect from direct exposure to sunlight and other environmental elements. Avoid pointing a camera directly at any bushes or tree branches or objects that may naturally move due to winds. x3 x4 EXPANDABLE up to 4 cameras Ask your retailer for accessory cameras (Models AWSC35 and AWSC36 are compatible with this system). 1 2 Secure the multi-position camera bracket to a stable surface, ceiling or wall. Loosen the T-Bolt on the camera bracket and adjust viewing angle using the Thumb Screw to rotate position. 4 3 Align hole on bottom of camera with T-Bolt to install camera. Screw antenna into rear of camera. Attach power cable to power extension cord AC Adapter. Plug into electrical outlet. ANDROID REMOTE VIEWING APPLE REMOTE VIEWING 1 2 FREE APP DOWNLOAD From your Android device, DOWNLOAD and INSTALL the free ALC Observer App. Turn on the Wi-Fi setting on your Android device and set it to your home network. The App will start the connection process. Tap Live View. Connect as shown in the Monitor section, above. Tap Set Up Wizard on screen for direct wireless connection of camera to App. 3 4 5 ANDROID DEVICE SETUP NOTE: Screen shots and icons may vary due to continuous updates to App and software development. 1 2 From your Apple device, DOWNLOAD and INSTALL the free ALC Observer App. The App will start the connection process. Once the screen indicates the camera is connected, tap Live View. Connect as shown in the Monitor section, above. Tap Set Up Wizard on screen for direct wireless connection of camera to App. 3 4 5 APPLE DEVICE SETUP FREE APP DOWNLOAD NOTE: If you are having a difﬁcult time connecting your smart device for remote viewing, please visit www.ALCWireless.com/support to view the latest guides. x2 (2) Antennas Quick Start Guide Internet (Ethernet) Cable Connection 7” Touch Screen Monitor Indoor/Outdoor Camera Tip: Plan the location of your cameras for optimal viewing and proximity to AC Power outlets, (2) power extension cables are included NOTE: Avoid installing in a location which requires the wireless signal to pass through cement, concrete and metal structures. This will reduce the transmission range. Pull out Stand Antenna Micro SD Card Slot Reset button Speaker Power (On/Off) AC Power Connection Antenna Multi-position Camera Bracket Thumb screw Camera Bracket T-Bolt AC Power cord In-line Pairing Button Infrared LED sensors AC power cable Included Ethernet Cable Internet Router (not included) x2 IMPORTANT: Please complete the setup before mounting; please be in close range with the camera while setting up.