www.assuredautomation.com e-mail: [email protected] 1-800-899-0553
19 Walnut Avenue, Clark, New Jersey 07066 Fax: 732-381-2922
Ang
Angle Seat Valve ARES 316 SS – ZEUS Bronze Body 316SS Stem & Plug
The Angle Seat Valve is a 2/2-way pneumatically actuated piston valve for liquids, gases, steam and some aggressive fluids (vacuum services also available).
The superior design of the piston is unique to the market, enabling the plug to retract farther from the flow path, ensuring the highest flow capacity. The dual packing design, and a large diameter self-aligning stem insures the highest cycle life.
A full range of accessory items are available including limit switches, solenoid valves, manual override devices, stroke limiters.
Product Features • Sizes available from 3/8" to 2" • Self aligning stem seal • High cycle life • Compact assembly • High flow capabilities • AISI 316 SS body, stem & plug • NAMUR Solenoid mounting pad
Valve Specifications ARES
AISI 316 SS Body & Plug PTFE seats & seals NPT threaded end connection
Zeus Bronze Body & SS Plug PTFE seats & seals NPT threaded end connection
TEMPERATURE RANGE:
-14ºF to 358ºF max
PRESSURE RATINGS From 0 to 230 PSI depending on the size and model
Steam to 150 PSI, Max 358°F Note: Max Viscosity 600CST
Thup
Thpo
Ares Angle Seat Valve Configurations Spring Return N.C. Bi-directional Flow Spring Return N.C. Flow from Above Plug Spring Return N.O. Flow from Below Plug Double Acting Bi-directional
Typical Applications Air Drying Equipment Sterilizers Autoclaves Pollution Control Equipment Process Control Applications Laundry Equipment Textile Dyeing & Drying Bottling & Dispensing Equipment Ink & Paint Dispensing Industrial Compressors
Easy Installation e Angle Seat Valve can be installed in any attitude,
le Seat Valves 8 10/01/01
Cv Chart Size 3/8” ½” ¾” 1” 1¼” 1½” 2”
Cv 6 7 12 23 33 54 78
right, inverted, flat or angled.
e actuator rotates 360° allowing for the selective sitioning of the pneumatic inlet port.
www.assuredautomation.com e-mail: [email protected] 1-800-899-0553
19 Walnut Avenue, Clark, New Jersey 07066 Fax: 732-381-2922
Angle Valve Quick Sizing Chart 9 10/01/01
***See Sizing Diagrams for additional selections and different actuator air pressures.
NC, Bi-Directional Flow ( 2 to 1 or 1 to 2 ) ARES Model ZEUS Model
Size 316SS Bronze Actuator Size Cv 65 PSIG* 80 PSIG* 3/8" J4SPG1643 J9SPG1643 DN50 5.7 140 PSIG 232 PSIG 1/2" J4SPG1644 J9SPG1644 DN50 6.5 140 PSIG 232 PSIG 3/4" J4SPG1645 J9SPG1645 DN50 12.1 80 PSIG 232 PSIG 3/4" J4SPG1845 J9SPG1845 DN63 12.1 150 PSIG 232 PSIG 1" J4SPG1846 J9SPG1846 DN63 23.4 80 PSIG 232 PSIG 1" J4SPG2146 J9SPG2146 DN90 23.4 175 PSIG 232 PSIG
1-1/4" J4SPG2147 J9SPG2147 DN90 33.3 110 PSIG 232 PSIG 1-1/2" J4SPG2148 J9SPG2148 DN90 53.8 55 PSIG 160 PSIG 1-1/2" J4SPG2348 J9SPG2348 DN110 53.8 95 PSIG 232 PSIG
2" J4SPG2349 J9SPG2349 DN110 78.3 65 PSIG 232 PSIG * Air Supply to actuator ** Maximum Steam Line Pressure is 150 PSIG
NC, Flow from above the plug ( 1 to 2 ) ARES Model ZEUS Model
Size 316 SS Bronze Actuator Size Cv 60 PSIG* 80 PSIG* 3/8" J4CPG1643 J9CPG1643 DN50 5.7 232 PSIG 232 PSIG 1/2" J4CPG1644 J9CPG1644 DN50 6.5 232 PSIG 232 PSIG 3/4" J4CPG1645 J9CPG1645 DN50 12.1 232 PSIG 232 PSIG 1" J4CPG1846 J9CPG1846 DN63 23.4 232 PSIG 232 PSIG 1-1/4" J4CPG2147 J9CPG2147 DN90 33.3 232 PSIG 232 PSIG 1-1/2" J4CPG2148 J9CPG2148 DN90 53.8 232 PSIG 232 PSIG 1-1/2" J4CPG2348 J9CPG2348 DN110 53.8 232 PSIG 232 PSIG 2" J4CPG2149 J9CPG2149 DN90 78.3 143 PSIG 232 PSIG 2" J4CPG2349 J9CPG2349 DN110 78.3 232 PSIG 232 PSIG * Air Supply to actuator ** Maximum Steam Line Pressure is 150 PSIG
NO, Flow from below the plug ( 2 to 1 ) ARES Model ZEUS Model
Size 316SS Bronze Actuator Size Cv 60 PSIG* 80 PSIG* 3/8" J4APG1643 J9APG1643 DN50 5.7 232 PSIG 232 PSIG 1/2" J4APG1644 J9APG1644 DN50 6.5 232 PSIG 232 PSIG 3/4" J4APG1645 J9APG1845 DN50 12.1 170 PSIG 232 PSIG 1" J4APG1846 J9APG1846 DN63 23.4 170 PSIG 232 PSIG 1-1/4" J4APG1847 J9APG1847 DN63 33.3 120 PSIG 200 PSIG 1-1/4" J4APG2147 - DN90 33.3 232 PSIG 232 PSIG 1-1/2" J4APG2148 J9APG2148 DN90 53.8 150 PSIG 232 PSIG 2" J4APG2349 J9APG2349 DN110 78.3 150 PSIG 232 PSIG * Air Supply to actuator ** Maximum Steam Line Pressure is 150 PSIG
DA, Bi-directional ( 2 to 1 or 1 to 2 ) ARES Model ZEUS Model
Size 316SS Bronze Actuator Size Cv 60 PSIG* 80 PSIG* 3/8" J4DPG1643 J9DPG1643 DN50 5.7 232 PSIG 232 PSIG 1/2" J4DPG1844 J9DPG1644 DN50 6.5 232 PSIG 232 PSIG 3/4" J4DPG1645 J9DPG1645 DN50 12.1 232 PSIG 232 PSIG 1" J4DPG1846 J9DPG1846 DN63 23.4 232 PSIG 232 PSIG 1-1/4" J4DPG1847 J9DPG1847 DN63 33.3 180 PSIG 232 PSIG 1-1/2" J4DPG1848 J9DPG1848 DN63 53.8 115 PSIG 170 PSIG 1-1/2" J4DPG2148 J9DPG2148 DN90 53.8 232 PSIG 232 PSIG 2" J4DPG2149 J9DPG2149 DN90 78.3 232 PSIG 232 PSIG * Air Supply to actuator ** Maximum Steam Line Pressure is 150 PSIG
Limit Switches-weatherproof DA Actuators Mechanical Switches (open&closed): M2
EP41 E5WC CGWC Inductive Switches (open & closed): I2 E5XC CGXC
Maximum Line Pressure**
Maximum Line Pressure**
Angle Valve Quick*** Sizing Chart
NO & NC Actuators
Sizing
Maximum Line Pressure** Sizing
Sizing
Weatherproof Explosion proof
Maximum Line Pressure** Sizing
Accessories (Complete selection see Compact Price List page 8) Solenoid Valves
Ares 10 10/01/01
Ares / Zeus Angle Valve Cross Section
1) Position Status: Visual indication (standard) or limit switch box (optional). 2) Easy Installation: The control head rotates 360° for selective positioning of the pneumatic inlet port. 3) Advanced Pneumatic Actuator: The high grade Polyamide materials used, together with an increased thickness guarantees reliability and safety. 4) High Cv: The superior design of the piston / cylinder, unique on the market, enables the plug to retract farther from the flow path, ensuring a higher flow capacity and less restriction. 5) Versatility: Adjusting the configuration of the actuator head, the Ares can be switched from Spring Return (N.O.-N.C.) to Double Acting. 6) Flow from Above The Plug and Condensable Media: Thanks to these features it is possible to use smaller control heads. 7) Other Features: The ideal internal flow characteristics, with its maximum capacity and high duty cycle, provide better performance compared to similar designs. 8) High Compatibility: Valve body and internal components are made entirely of AISI 316 (Ares) or Brass & 316 S/S (Zeus), and the seals are in PTFE, therefore enabling a high chemical compatibility with almost all media used in the different production processes.
9) Free from Water Hammer: When flow is from below the plug. 10) Microcast Body: AISI 316 Stainless Steel (Ares) or Brass (Zeus) 11) Perfect Internal Capacity: The special internal conformation of the valve seat avoids excessive deformation of the PTFE seal at high temperature or pressure, making the Ares or Zeus a long-lasting valve. The self-aligning plug design guarantees a high duty cycle, under all kinds of pressure. 12) Extended Life: The Stainless Steel Spring and the particular shape of the dual self-adjusting stem seals, ensure a perfect tightness through wear and tear of time. 13) Reliable and Long Lasting: The metal piston coated with a slow-wearing protection, and the employment of self-lubricating guides and seals, guarantee an almost unlimited life to the pneumatic control section, even through constant use under the most extreme conditions. 14) No Maintenance: The valve is provided with long lasting seals. Guides and seals are made with a self-lubricating material. 15) Flexibility: The NAMUR connection for the control valve is provided as standard.
www.assuredautomation.com e-mail: [email protected] 1-800-899-0553
19 Walnut Avenue, Clark, New Jersey 07066 Fax: 732-381-2922
Ares 11 10/01/01
Ares / Zeus Dimensions
Ares (316 S/S) Zeus (Bronze)
Size Actuator A B C D øE F ch.L A B C D øE F ch.L 3/8” DN40** 5.74 4.74 5.26 1.38 2.40 2.56 0.98 5.67 4.76 5.26 1.38 2.40 2.56 1.06 3/8” DN50 7.48 6.14 6.65 1.73 2.76 3.35 0.98 6.42 5.51 6.02 1.73 2.76 2.56 1.06 1/2" DN40** 5.74 4.74 5.26 1.38 2.40 2.56 0.98 5.67 4.76 5.26 1.38 2.40 2.56 1.06 1/2" DN50 7.48 6.14 6.65 1.73 2.76 3.35 0.98 6.42 5.51 6.02 1.73 2.76 2.56 1.06 3/4" DN40** 6.02 4.94 5.57 1.38 2.40 2.95 1.22 -- -- -- -- -- -- -- 3/4" DN50 7.68 6.30 6.30 1.73 2.76 3.74 1.22 6.81 5.79 6.42 1.73 2.76 2.95 1.08 3/4" DN63 8.39 7.00 7.01 1.99 3.32 3.74 1.22 7.52 6.5 7.13 1.99 3.32 2.95 1.08 1” DN50 7.87 6.46 7.20 1.73 2.76 4.13 1.50 -- -- -- -- -- -- -- 1” DN63 8.62 7.17 7.17 1.99 3.32 4.13 1.50 8.11 6.93 7.72 1.99 3.32 3.54 1.61 1” DN90 10.20 8.74 8.74 2.61 4.58 4.13 1.50 9.69 8.50 9.29 2.61 4.58 3.54 1.61
1¼” DN50 8.19 6.61 7.52 1.73 2.76 4.72 1.85 -- -- -- -- -- -- -- 1¼” DN63 8.90 7.32 7.32 1.99 3.32 4.72 1.85 8.46 7.09 8.07 1.99 3.32 4.33 1.97 1¼” DN90 10.47 8.90 8.90 2.61 4.58 4.72 1.85 10.04 8.66 9.65 2.61 4.58 4.33 1.97 1¼” DN110 11.89 10.28 11.22 3.05 5.54 4.72 1.85 -- -- -- -- -- -- -- 1½” DN63 9.09 7.48 7.48 1.99 3.32 5.12 2.13 -- -- -- -- -- -- -- 1½” DN90 10.67 9.06 9.06 2.61 4.58 5.12 2.13 10.63 9.25 10.39 2.61 4.58 4.72 2.28 1½” DN110 12.09 10.47 10.47 3.05 5.54 5.12 2.13 12.05 10.67 11.81 3.05 5.54 4.72 2.28 2” DN63 9.65 7.87 9.17 1.99 3.32 5.91 2.60 -- -- -- -- -- -- -- 2” DN90 11.22 9.45 9.45 2.61 4.58 5.91 2.60 11.02 9.45 10.83 2.61 4.58 5.91 2.76 2” DN110 12.64 10.87 10.87 3.05 5.54 5.91 2.60 12.44 10.87 12.24 3.05 5.54 5.91 2.76
** Actuator does not have NAMUR Solenoid Mounting Pad BOLD = Available for Quick Ship
www.assuredautomation.com e-mail: [email protected] 1-800-899-0553
19 Walnut Avenue, Clark, New Jersey 07066 Fax: 732-381-2922
Ares / Zeus 12 10/01/01
Normally Closed with Flow From Above the Plug
Diagram 5 – Actuator Size 50 Diagram 6 – Actuator Size 63
Diagram 7 – Actuator Size 90 Diagram 8 – Actuator Size 110
CODE Control PSI Operating PSI Ares Zeus NPT DN Cv
Actuator Size Min Max Max. PSI
Weight #’s
J4CPG1643 J9CPG1643 3/8" 15 5.68 50 26 145 diagram n°5 2.2 J4CPG1644 J9CPG1644 1/2" 15 6.61 50 26 145 diagram n°5 2.2 J4CPG1645 J9CPG1645 3/4" 20 12.18 50 26 145 diagram n°5 2.64 J4CPG1846 J9CPG1846 1" 25 23.20 63 26 145 diagram n°6 3.52 J4CPG2147 J9CPG2147 1"1/4 32 33.64 90 26 145 diagram n°7 6.82 J4CPG2148 J9CPG2148 1"1/2 40 53.36 90 26 116 diagram n°7 8.14 J4CPG2348 J9CPG2348 1"1/2 40 53.94 110 26 116 diagram n°8 10.12 J4CPG2149 J9CPG2149 2" 50 68.44 90 26 116 diagram n°7 9.68 J4CPG2349 J9CPG2349 2" 50 77.72 110 26 116 diagram n°8 16.72
* Flow from above the plug for condensable media
www.assuredautomation.com e-mail: [email protected] 1-800-899-0553
19 Walnut Avenue, Clark, New Jersey 07066 Fax: 732-381-2922
Ares / Zeus 13 10/01/01
Normally Open with Flow From Below the Plug
CODE Control PSI Operating PSI Ares Zeus NPT DN Cv
Actuator Size Min Max Max. PSI
Weight #’s
J4APG1643 J9APG1643 3/8" 15 5.68 50 26 145 diagram n°9 2.2 J4APG1644 J9APG1644 1/2" 15 6.61 50 26 145 diagram n°9 2.2 J4APG1645 J9APG1645 3/4" 20 12.18 50 26 145 diagram n°9 2.64 J4APG1846 J9APG1846 1" 25 23.20 63 26 145 diagram n°10 3.52 J4APG2847 J9APG2847 1"1/4 32 33.06 63 26 145 diagram n°10 4.4 J4APG2148 J9APG2148 1"1/2 40 53.36 90 26 116 diagram n°11 8.14 J4APG2349 J9APG2349 2" 50 53.94 110 26 116 diagram n°12 16.72
Diagram 9 – Actuator Size 50 Diagram 10 – Actuator Size 63
Diagram 11 – Actuator Size 90 Diagram 12 – Actuator Size 110
www.assuredautomation.com e-mail: [email protected] 1-800-899-0553
19 Walnut Avenue, Clark, New Jersey 07066 Fax: 732-381-2922
Ares / Zeus 14 10/01/01
Diagram 1 – Actuator Size 50 Diagram 2 – Actuator Size 63
Diagram 3 – Actuator Size 90 Diagram 4 – Actuator Size 110
Normally Closed with Bi-Directional Flow
With the flow from below the plug (from 2 to 1) CODE Control PSI Operating PSI
Ares Zeus NPT DN Cv Actuator
size Min Max Max. PSI Weight
#’s J4SPG1643 J9SPG1643 3/8" 15 5.68 50 58 145 diagram n°1 2.42 J4SPG1644 J9SPG1644 1/2" 15 6.61 50 58 145 diagram n°1 2.2 J4SPG1645 J9SPG1645 3/4" 20 12.18 50 58 145 diagram n°1 2.64 J4SPG1845 J9SPG1845 3/4" 20 12.53 63 58 145 diagram n°2 2.64 J4SPG1846 J9SPG1846 1" 25 23.20 63 58 145 diagram n°2 3.52 J4SPG2146 J9SPG2146 1" 25 23.20 90 58 116 diagram n°3 3.74 J4SPG2147 J9SPG2147 1"1/4 32 33.64 90 58 145 diagram n°3 6.6 J4SPG2148 J9SPG2148 1"1/2 40 53.36 90 58 116 diagram n°3 7.48 J4SPG2348 J9SPG2348 1"1/2 40 53.94 110 58 116 diagram n°4 8.8 J4SPG2349 J9SPG2349 2" 50 77.72 110 58 116 diagram n°4 11.66
With the flow from above the plug (from 1 to 2) consult diagrams
www.assuredautomation.com e-mail: [email protected] 1-800-899-0553
19 Walnut Avenue, Clark, New Jersey 07066 Fax: 732-381-2922
Ares / Zeus 15 10/01/01
Double Acting with Bi-Directional Flow
Diagram 13 – Actuator Size 50 Diagram 14 – Actuator Size 63
Diagram 15 – Actuator Size 90 Diagram 16 – Actuator Size 110
CODE Control PSI Operating PSI Ares Zeus NPT DN Cv
Actuator Size Min Max Max. PSI
Weight #’s
J4DPG1643 J9DPG1643 3/8" 15 5.68 50 11 116 diagram n°13 2.2 J4DPG1644 J9DPG1644 1/2" 15 6.61 50 11 116 diagram n°13 2.2 J4DPG1645 J9DPG1645 3/4" 20 12.18 50 11 116 diagram n°13 2.64 J4DPG1846 J9DPG1846 1" 25 23.20 63 11 116 diagram n°14 3.52 J4DPG2847 J9DPG2847 1"1/4 32 33.06 63 11 116 diagram n°14 4.18 J4DPG2848 J9DPG2848 1"1/2 40 40.60 63 11 116 diagram n°14 5.06 J4DPG2148 J9DPG2148 1"1/2 40 53.36 90 11 116 diagram n°15 7.92 J4DPG2149 J9DPG2149 2" 50 68.44 90 11 116 diagram n°15 9.46
www.assuredautomation.com e-mail: [email protected] 1-800-899-0553
19 Walnut Avenue, Clark, New Jersey 07066 Fax: 732-381-2922
Are
Clamp-End Angle Seat Valve
The Angle Seat Valve is a 2/2-way pneumatically actuated piston valve for liquids, gases, steam and some aggressive fluids (vacuum services also available).
The superior design of the piston is unique to the market, enabling the plug to retract farther from the flow path, ensuring the highest flow capacity. The dual packing design, and a large diameter self-aligning stem insures the highest cycle life.
A full range of accessory items are available including limit switches, solenoid valves, manual override devices, stroke limiters.
Product Features • Sizes: 1”, 1½”, 2”, 2½” T-Clamp Connections • Self aligning stem seal • High cycle life • Compact assembly • High flow capabilities • AISI 316 SS body, stem & plug • NAMUR Solenoid mounting pad
Valve Specifications Sanitary Angle Seat Valve
AISI 316 SS Body & Plug PTFE seats & seals T-Clamp end connection
TEMPERATURE RANGE:
-14ºF to 358ºF max
PRESSURE RATINGS From 0 to 230 PSI depending on the size and model
Steam to 150 PSI, Max 358°F Note: Max Viscosity 600CST
Thup
Thpo
Ares Angle Seat Valve Configurations Spring Return N.C. Bi-directional Flow Spring Return N.C. Flow from Above Plug Spring Return N.O. Flow from Below Plug Double Acting Bi-directional
Typical Applications Air Drying Equipment Sterilizers Autoclaves Pollution Control Equipment Process Control Applications Laundry Equipment Textile Dyeing & Drying Bottling & Dispensing Equipment Ink & Paint Dispensing Industrial Compressors
Easy Installation e Angle Seat Valve can be installed in any attitude,
s Clamp-End 09/15/02
Cv Chart Size 1” 1½” 2” 2½”
Cv 12 23 54 78
right, inverted, flat or angled.
e actuator rotates 360° allowing for the selective sitioning of the pneumatic inlet port.
www.assuredautomation.com e-mail: [email protected] 1-800-899-0553
19 Walnut Avenue, Clark, New Jersey 07066 Fax: 732-381-2922
Ares T-Clamp 09/01/02
Ares T-Clamp Dimensions
Ares (316 S/S) T-Clamp
Size Actuator Cv Size* A B C D ØE F ØG Clamp OD
ØH ØL Opening ID
M
T5 DN50 12.1 1” 7.42 6.29 7.28 1.73 2.75 4.50 1.98 1.26 0.93 1.12
T5 DN63 12.1 1” 8.13 7.00 7.99 1.98 3.32 4.50 1.98 1.26 0.93 1.12 T6 DN50 23.4 1½” 7.62 6.45 7.44 1.73 2.75 5.09 1.98 1.49 1.17 1.20 T6 DN63 23.4 1½” 8.37 7.15 8.14 1.98 3.32 5.09 1.98 1.49 1.17 1.20 T6 DN90 23.4 1½” 9.94 8.72 9.72 2.60 4.57 5.09 1.98 1.49 1.17 1.20 T8 DN63 53.8 2” 8.85 7.47 8.72 1.98 3.32 6.27 2.52 2.12 1.74 1.38 T8 DN90 53.8 2” 10.42 9.04 10.30 2.60 4.57 6.27 2.52 2.12 1.74 1.38
T8 DN110 53.8 2” 11.83 10.45 11.71 3.04 5.53 6.27 2.52 2.12 1.74 1.38 T9 DN63 78.3 2½” 9.45 7.86 9.38 1.98 3.32 6.86 3.05 2.59 2.19 1.61 T9 DN90 78.3 2½” 11.02 9.43 10.95 2.60 4.57 6.86 3.05 2.59 2.19 1.61 T9 DN110 78.3 2½ 12.43 10.85 12.37 3.04 5.53 6.86 3.05 2.59 2.19 1.61
* Tri-Clamp mating clamp / pipe size