56
ANNEXURE 12 ARCHITECTURAL TENDER DRAWINGS: FITTINGS
ANNEXURE 12
ARCHITECTURAL TENDER DRAWINGS: FITTINGS
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
1,10
048
060
0
100
900
100
2,00
060
0
760
90
117
1,89
547
111
727
1,500
F01-
E
F01-N
F04-
W
F04-N
F05-
E
1.
9.
3.
4.
4.
7.7.4.
4. 5.
5.
4.
8.
7.
7. 4.
7.
8.
2.
2.
1.
3.
5.
5.
2.
2.
3.
3.
11
F01-01
F04-01
F05-01
F03-3
444
600
2,015
100 1,282 100 433 100
3.
1 PLAN F01-04-05 @4501:25
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
564-1
03-06-2018
1 : 25PLAN FITTINGS / F01 - 04 - 05UPPER GROUND FLOOR (ADMIN) @ 450 mm A.F.F.L - / -
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
444
760
2,60
0
600
117
600
600
1,58
0
F01-
E
F01-N
F04-
W
F04-N
F05-
E
3.
7.
9.
1.
1.4.
4.
4.
1.
2.
2.
2.
2.
1.
1.
F01-01
F04-01
F05-01 600
1.
9.
1 PLAN F01-04-05 @8001:25
564-2
03-06-2018
1 : 25PLAN FITTINGS / F01 - 04 - 05UPPER GROUND FLOOR (ADMIN) @ 800 mm A.F.F.L - / -
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
2,600
2,000 600
100
1,00
0
750
1
1 hidden
8 hidden
3
4
1
MUNICIPAL ARCHIVES FACILITY
2
1
750
760
100
1,09
0
1
2
2
8
3
5
5
2
3
5
4
1
9025
090
77 8
1 F01-E1:25
2 F01-N1:25
SPEC 1
6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.
8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners / Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 )Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.
12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.
564-3
03-06-2018
1 : 25
- / -
SECTION-DTLS / F01-E / F01-NUPPER GROUND FLOOR (ADMIN) - RECEPTION
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
2,015
600
100
9.
1. 2.
7.
5.
4.
7.
4.
4.
1.
4.
F04-1/2 F05-1/2
900
100
2.
9.600
75
900
742
100
363
365 5.
2.
1.
9.
7.
4.
2.
F04600 474 100 906 100
2,180
2. 1.2.
8.
8.
7.
900
1 F04-N1:25
2 F04-W1:25
3 F05-E1:25
564-4
03-06-2018
1 : 25SECTION-DTLS / F04-N / F04-W / F05-EUPPER GROUND FLOOR (ADMIN) - BOARDROOM KITCHEN - / -
SPEC 1
6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.
8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners / Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 )Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.
12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
2,000
790
750
750
790
F02-N
F02-
E
F37-S
11. 12.
12.
12.
11.
12
12
12.
12.
11.
12.
12.
12
F02-3
F02-2
F02-4
F02-1
1 PART PLAN F021:25
565-1
03-06-2018
1 : 25PLAN FITTING / F02UPPER GROUND FLOOR (ADMIN) - PUBLIC READING ROOM - / -
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
2,000 15 2,000
780
11.
12.
12.
F02-2 F02-1
4067
040
4067
040
750
40
750
40
780
780
2,40
0
11.
12.
12.
12.
11.
12.
12.
12.
F02-3/4 F02-1/2 F37-2
710
710
4067
040
30
40 370 40
1 F02-N1:25
2 F02-E1:25
565-2
03-06-2018
1 : 25SECTION-DTLS / F02UPPER GROUND FLOOR (ADMIN) - PUBLIC READING ROOM - / -
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE2,
000
1,500 1,500 1,500
4,500
450
4037
040
40 40 1,340 40 40
1,500
F01-
E
F03-N F03-
W
11
12
12
1212 12
11
11F03-3F03-2F03-1
3.
1 PART PLAN F031:25
566-1
03-06-2018
1 : 25PLAN FITTING / F03UPPER GROUND FLOOR (ADMIN) - PUBLIC FOYER - / -
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
450
450
4033
040
40
11.
12.
12.
12.
F03-1/2/3
D-07Detail
1,500 1,500 1,500
4508040
40
40370
80
450 40
40
12.12.
12.
11.
11.
12.
F03-1 F03-2 F03-3
4040
40
1 F03-W1:25
2 F03-N1:25
3 D-07 Detail1:5
11.
12.
11.
566-2
03-06-2018
1 : 25 / 1 : 5SECTION-DTLS / F03-N, F03-W, DTL 07UPPER GROUND FLOOR (ADMIN) - PUBLIC FOYER - / -
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
700
5,000
890 1,552 117 1,552 890
499 27 499 27 499
117 656 3,454 656 117
583
F06-N
F06-
E
3.
5.
4.
4.
3.
3.
7.
7.
3.
3.
3.
8.
3.
3.
4.
4.
F06-01
1 PLN F06 @ 4501:25
567-1
03-06-2018
1 : 25PLAN FITTING / F06 @ 450 mm A.F.F.LUPPER GROUND FLOOR (ADMIN) - STAFF COMMON AREA - / -
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
5,000
700
2,558 1,552 891
583
117
F06-N
F06-
E
1.
2.
2.
2.1.
1.
8.
F06-01
1 PLN F06 @ 10001:25
567-2
03-06-2018
1 : 25PLAN FITTING / F06 @ 800 mm A.F.F.LUPPER GROUND FLOOR (ADMIN) - STAFF COMMON AREA - / -
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
900
5,000
2,559 1,550 892
517 517 517 117
683
2.
3.
2.
1.
3.
1. F06-1
100
347
453
8.
8.4.
2.
688
888
512
105 2.
1.2.3.
5.
9.
1.
2.F06-1/2
100
337
75 8.
1 F06-N1:25
2 F06-E1:25
567-3
03-06-2018
1 : 25SECTION-DTLS / F06UPPER GROUND FLOOR (ADMIN) - STAFF COMMON AREA - / -
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
700
2,31
5
F07-
08 W
F07-08 N5.
5.
5.
5.
4.
1.
7.
8.
4.
4.
4.
7.
4.
7.
F07-01
117
832
2778
627
409
117
568
2,31
5
2751
127
1,18
527
511
27
F07-
08 W
F07-08 N5.
4.
4.
1.
2.
F08-01
F07-01
308
700
1 PLN F07 @ 4501:25
2 PLN 07-08 @ 15001:25
568-1
03-06-2018
1 : 25PLAN FITTING / F07 - 08 @ 450 & 800 mm A.F.F.LUPPER GROUND FLOOR (ADMIN) - STAFF KITCHEN - / -
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
2,315
565 1,185 565
288
2728
8
2,315
117 421 27 774 27 832 117
5.
4.
2.
1.2.
3.
8.
F07-01
F08-01
657
900
7.
7.
7.
7.
700
573
308
900
443
657
1.
2.
8.
8.
8.
2.
F07-01
F08-01
657
7.
5.
4.
4.
1 F07-08 W1:25
2 F07-08 N1:25
568-2
03-06-2018
1 : 25SECTION-DTLS / F07-08 W , F07-08 NUPPER GROUND FLOOR (ADMIN) - STAFF KITCHEN - / -
SPEC 1
FABRICATION NOTES:-
1. COUNTERTOP - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour - GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.2. CTR.TOP TURNDOWN - 36 mm purpose made countertop of 12 mm 'SURRINO' solid surfacing Colour-GLACIER WHITE to manuf. spec on 24 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec., o.e.a.3. CTR. CARCASS / A - 21 mm WISA - BIRCH plywood, (surface grade S/BB) with AFRICAN MAHOGANY veneer facing to external face.4. CTR. CARCASS / B - 21 mm WISA - BIRCH plywood (surface grade S/BB) with FORMICA veneer facing to external face.5. CTR. CARCASS / C - 21 mm WISA - BIRCH plywood (surface grade B/BB) with catalysed clear coating to spec.6. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges 4no. 50x19 mm swivel castor wheels fixed to u/side unit 2x (code 2470 PJ1 050 P40) & 2x (code 2475 PJ1 050 P40) by 'CASTOR / LADDER' o.e.a.7. CPBD DOORS - 18 mm WISA - BIRCH plywood, (surface grade B/BB) cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) Hinges - Slide-on 110 deg hinge with 0 mm cranking, 2 per door GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.8. CPBD DRAWERS - 18 mm WISA - BIRCH plywood, (surface Grade B/BB) drawer fronts, with AFRICAN MAHOGANY veneer facing to external face, 12mm WISA - BIRCH plywood (surface Grade B/BB) drawer carcass, & catalysed clear coating to exposed edges & internal surfaces. Slides - 500 mm telescopic ball bearing drawer runners Handles - 100 mm Concealed handle by GELMAR ( code BSN 8227 ) Locks - drawer lock, key alike GELMAR (code 9045) o.e.a.9. CTR.TOP SUPPORT FRAME / A - 40x40 mm galv. m/steel S.H.S to u/side counter, with Powder coated finishes to spec.10. W/TOP SUPPORT FRAME / B - 50x100 mm galv. m/steel R.H.S to u/side worktop, with bracketed connections to carcass unit & Powder coated finishes to spec.11. BENCH / TABLE TOP - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.12. SUPPORT FRAME / C - 40x40 mm s/steel S.H.S with welded connections, & bracket supports to arch. detailSURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
4063
040
708
710
40 1,438 40
1,518
1,520 1,520
710
710
F09-N
F09-
W
5.1
5.1
5.1
3.
3.
3.
3.1 above
5.2
5.2 above
5.1 above3.1 above
5.1 above
F09-1 F09-4
F09-2 F09-3
1 PLN F09 @ 4501:25
SPEC 4
FABRICATION NOTES:-
1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish Type A - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.
SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
569-1
03-06-2018
1 : 25PLAN FITTING / F09 @ 450 mm A.F.F.LUPPER GROUND FLOOR (ADMIN) - PRIVATE READING ROOM - / -
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
4063
040
710
40 453 40 453 40 453 40
1,520 1,520
710
710
F09-N
F09-
W
3.1
3.1
3.1
5.1
5.2.
5.1
5.35.1
5.1
3.2 below
3.2 below3.1
3.2 below
F09-1 F09-4
F09-2 F09-3
1 PLN F09 @ 8001:25
569-2
03-06-2018
1 : 25PLAN FITTING / F09 @ 800 mm A.F.F.LUPPER GROUND FLOOR (ADMIN) - PRIVATE READING ROOM - / -
SPEC 4
FABRICATION NOTES:-
1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish Type A - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.
SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-01Detail
745
4062
040
3540 453 40 453 40 453 40
3.1
5.1
5.35.1
3.2
5.1
F09-1/2 F09-3/4
1,520 6 1,520
5.2
5.3
D-01Detail
4062
040
35
40 630 40
5.1
3.1
3.2 F02-2/3F02-1/4 710
5.15.2
5.3
40
20
4035
1520
1 F09-N1:25
2 F09-W1:25
3 D-01 Detail1:5
3.13.2
5.2
5.0
5.0
569-3
03-06-2018
1 : 25 / 1 : 5SECTION-DTLS / F09-N, F09-WUPPER GROUND FLOOR (ADMIN) - PRIVATE READING ROOM - / -
SPEC 4
FABRICATION NOTES:-
1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish Type A - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.
SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-08Detail
1,50
0
401,
420
40
600
40 520 40
F10-
W
F10-S
5.2 below
5.2 below
5.1
5.2
5.2
F10-1
1,50
0
3435
736
036
035
634
F10-
W
F10-S
2.
5.2 below
5.2 below
5.3 below
5.1
5.1
F10-1
1 PLN F10 @ 4501:25
2 PLN F10 @ 8001:25
570-1
03-06-2018
1 : 25PLAN FITTING / F10 @ 450 & 800 mm A.F.F.LUPPER GROUND FLOOR (ADMIN) - SECURITY ROOM - / -
SPEC 4
FABRICATION NOTES:-
1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish Type A - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.
SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-09Detail
660
4040
750
600
660
4040
1,500
150
40
5 3
150 40
4040
40
32 3 5
1 F10-S1:25
2 F10-W1:25
3 D-08 Detail1:5
4 D-09 Detail1:5
2.
5.3
5.2
5.1
5.2
5.1
5.2
5.3
5.2
570-2
03-06-2018
1 : 25/ 1 : 5SECTION-DTLS / F10-S , F10-W , DTL 08 , 09UPPER GROUND FLOOR (ADMIN) - SECURITY ROOM - / -
SPEC 4
FABRICATION NOTES:-
1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish Type A - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - cam lock, keyed alike, 1 per door - GELMAR (code 9041) o.e.a.
SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-02Detail40
1,12
040
1,20
0
40 1,440 40 1,440 40
3,000
F11-N
F11-
W
4.1 above
6.2 above
6.1
6.1
6.1
6.1
6.1
6.4 above
6.1F11-A1
F11-A2
Worktop / 4.1 - Neolith 6 mm sintered stone - colour 'NERO' (satin finish)Frame / 6.1 - 6.4 - Powder coating 'SOFT BLACK' / code MN225Z Interpon F1500 series
F36-1
F36-2
1 PLN F11A @ 4501:25
571-1
03-06-2018
1 : 25PLAN FITTING / F11A @ 450 mm A.F.F.LLOWER MID GROUND FLOOR (STORAGE) - PROCESS ROOM 1 - / -
SPEC 4
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame (Finish Type A - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type A - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
1,20
0
401,
120
40
40 1,440 40 1,440 40
3,000
460 30 460 30 460 40 460 30 460 30 460
F11-N
F11-
W
6.2
6.1 below
6.3 below
6.4 below
6.3 below
6.2
4.1
4.4 below
F36-1
F11-A1
F36-2
Worktop / 4.1 - Neolith 6 mm sintered stone - colour 'NERO' (satin finish)Frame / 6.1 - 6.4 - Powder coating 'SOFT BLACK' / code MN225Z Interpon F1500 series
1 PLN F11A @ 10001:25
571-2
03-06-2018
1 : 25PLAN FITTING / F11A @ 1000 mm A.F.F.LLOWER MID GROUND FLOOR (STORAGE) - PROCESS ROOM 1 - / -
SPEC 4
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame (Finish Type A - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type A - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-03Detail
D-04Detail
4063
060
40
340
170
4063
060
40 1,440 40 1,440 40
4.1
6.2
6.1
6.2
6.4
4.4
6.2
F11-A1
60
40
3
156
30
30
60
3915
6
D-03Detail
D-05Detail
40 1,120 40
1,200
60
900
170
40
4.1
6.4
6.2
6.1
6.1
6.5
4.4
F11-A1
270 40 581 40 270
1 F11A-N1:25
4 D-03 Detail1:2
3 D-04 Detail1:2
2 F11A-W1:25
4.1
6.2
6.4
4.4
4.1
4.4
6.2
6.16.2
6.3
571-3
03-06-2018
1 : 25 / 1 : 2SECTION-DTLS / F11A-N, F11A-W , DTL 03, 04LOWER MID GROUND FLOOR (STORAGE) - PROCESS ROOM 1 - / -
SPEC 4
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame (Finish Type A - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type A - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-06Detail
401,
120
40
40 1,440 40 1,440 40
3,000
1,20
0
207
4070
740
207
F11-
12 W
6.1
6.1
6.2 above
6.4
6.2
4.1 above
4.4 above
6.4 above
6.1
6.1
F11-A4
F12
Worktop / 4.1 - Neolith 6 mm sintered stone - colour 'NERO' (satin finish)Frame / 6.1 - 6.4 - Powder coating 'SOFT BLACK' / code MN225Z Interpon F1500 series
F19
40
4016
740
207
1 PLN F11A @ 450 S (LVL-1)1:25
2 D-06 Detail1:5
6.1
6.1
6.1
4.1 above
6.2 above
572-1
03-06-2018
1 : 25 / 1 : 5PLAN FITTING / F11A @ 450 mm A.F.F.LLOWER MID GROUND FLOOR (STORAGE) - PROCESS ROOM 2 - / -
SPEC 4
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame (Finish Type A - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type A - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-02Detail
1,20
0
401,
120
40
40 1,440 40 1,440 40
3,000
460 30 460 30 460 40 460 30 460 30 460
F11-
12 W
6.26.1
6.3
6.4
6.2
4.4
4.1
F11-A4
F12Worktop / 4.1 - Neolith 6 mm sintered stone - colour 'NERO' (satin finish)Frame / 6.1 - 6.4 - Powder coating 'SOFT BLACK' / code MN225Z Interpon F1500 series
F19
40
40
25 110
1 25 Lev -1 LG @ 800 S1:25
2 D-02 Detail1:5
6.2
6.1
6.2
6.3
4.1
4.4
572-2
03-06-2018
1 : 25 / 1 : 5PLAN FITTING / F11A @ 1000 mm A.F.F.LLOWER MID GROUND FLOOR (STORAGE) - PROCESS ROOM 2 - / -
SPEC 4
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame (Finish Type A - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type A - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-03Detail
D-05Detail
40 1,120 40
1,200
60
900
170
404.1
4.4
6.2
6.1
6.1
6.2
F11-A4
270 40 581 40 270
20
170
40
40 60
40
3
156
1 F11-12 W1:25
2 D-05 Detail1:5
3 D-03 Detail1:2
4.1
4.4
6.2
6.16.2
6.3
6.1
6.1
6.5
6.6
572-3
03-06-2018
1 : 25 / 1 : 5SETION-DTLS / F11W , DTL 03 , 05LOWER MID GROUND FLOOR (STORAGE) - PROCESS ROOM 2 - / -
SPEC 4
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame (Finish Type A - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type A - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-06Detail
401,
120
40
40 1,440 40 1,440 40
1,20
0
207
4070
740
207
3,000
F11B-N6.4 above
6.2 above
6.1
6.1
6.2 above
6.4
6.2
4.3 above
4.4 above
6.1
Worktop / 4.3 - Neolith 6mm sintered stone - colour 'ESTATUARIO' (silk finish)Frame / 6.1 - 6.4 - Powder coating 'PURPLE GRANITE' / code MH200Z, Interpon F1500 series
F11-B1
1 PLN F11B @ 450 ATRIUM1:25
573-1
03-06-2018
1 : 25PLAN FITTING / F11B @ 450 mm A.F.F.LLOWER GROUND FLOOR (ATRIUM) - PROCESS ROOM 3 - / -
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type C - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type C - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-02DetailD-02Detail
1,20
0
401,
120
40
40 1,440 40 1,440 40
3,000
460 30 460 30 460 40 460 30 460 30 460
F11B-N
6.26.1 below
6.3 below
6.4 below
6.2 below
4.4 below
4.3
F11-B1
Worktop / 4.3 - Neolith 6mm sintered stone - colour 'ESTATUARIO' (silk finish)Frame / 6.1 - 6.4 - Powder coating 'PURPLE GRANITE' / code MH200Z, Interpon F1500 series
1 PLN F11B @ 1000 ATRIUM1:25
573-2
03-06-2018
1 : 25PLAN FITTING / F11B @ 800 mm A.F.F.LLOWER GROUND FLOOR (ATRIUM) - PROCESS ROOM 3 - / -
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type C - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type C - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-03Detail
D-04Detail
170
4063
060
900
4.3
6.2
6.1
6.2
6.4
4.4
6.1
6.5
6.1
6.2
40 1,440 40 1,440 40
60
40
3
156
30
30
60
3915
6
1 F11B-N1:25
4 D-03 Detail1:2
3 D-04 Detail1:2
4.3
6.2
6.4
4.4
4.3
4.4
6.2
6.16.2
6.3
573-3
03-06-2018
1 : 25 / 1 : 2SECTION-DTLS / F11B-N , DTL 03, 04LOWER GROUND FLOOR (ATRIUM) - PROCESS ROOM 3 - / -
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type C - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type C - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
2074070740207
401,
440
401,
440
40
3,00
0
40 1,120 40
1,200
2446
324
2,40
9
787
F11C-N
F11E-S
6.1
6.2 above
7.
8.
6.1
7.
8.
7.
8.
7.6.1
7.6.2 above
F11-C2 F11-C1
1 PLN F11C @ 450 A1:25
574-1
03-06-2018
1 : 25PLAN FITTING / F11C @ 450 mm A.F.F.LLOWER GROUND FLOOR (ADMIN) - PROCESS ROOM 4 - / -
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type B - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-02Detail
1,200
40 1,120 40
401,
440
401,
440
40
3,00
0
460
3046
030
460
4046
030
460
3046
0
F11C-N
F11E-S
6.4
6.2
6.3
6.2
6.1
4.2
4.4
4.2
6.2
F11-C1
1 PLN F11C @ 1000 A1:25
574-2
03-06-2018
1 : 25PLAN FITTING / F11C @ 1000 mm A.F.F.LLOWER GROUND FLOOR (ADMIN) - PROCESS ROOM 4 - / -
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type B - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-05Detail
40 1,120 40
1,200
60
900
170
40
4.2
4.46.2
6.17
F11-C1D-03Detail
270 40 581 40 270
6.17
8
20
170
40
40 60
40
3
156
1 F11C-N1:25
2 D-05 Detail1:5
3 D-03 Detail1:2
4.2
4.4
6.2
6.16.2
6.3
6.1
6.1
6.5
6.6
574-31:25, 1:5SECTION - DTLS / F11C-N, D-03, D-05
LOWER GROUND FLOOR (ADMIN) - PROCESS ROOM 4 - / -
20-08-2018
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type B - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
D-11Detail
520
24 477 24 477 24 477 24 477 24 477 24
1847
8
304683047130471304713046830
3046
030
2,531
F11D-S
F11-D2 F11-D1F11-D3
5245
5
100
30
30
4018
1 PLN F11D @ 4501:25
2 D-11 Detail1:2
3 D-10 Detail1:2
6.4
6.7
6.6
6.5
6.7
7.06.7
6.7
6.6
6.5 below
8.0
7.0
7.0
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type B - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
575-1
20-08-2018
1:25, 1:2PLAN - DTLS / F11D @ 450mm, D-10, D-11LOWER GROUND FLOOR (ADMIN) - PASSAGE - ABLUTIONS - / -
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
2,53160
0
4052
040
404583047130471304713045840
F11D-S
6.2
6.7 below
6.4 below6.4 below
F11-D2 F11-D1F11-D3
600
599
1820
0
8177
6.47
7
4.24.4
6.7
F11-D1
D-10Detail
D-12Detail
8
40
2460
3015
6
1 PLN F11D @ 8001:25
2 F11D-W1:25
3 D-12 Detail1:2
4.2
4.4
6.2
6.7
7.0
6.3
8.0
575-2
20-08-2018
1:25, 1:2PLAN F11D @ 1000mm, SECT. F11D-W, D-12LOWER GROUND FLOOR (ADMIN) - PASSAGE - ABLUTIONS - / -
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type B - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
2,531
1,05
0
8540
865
60
24 477 24 477 24 477 24 477 24 477 24
511 5 1,500 5 511
F11-D1 F11-D2 F11-D3
1 F11D-S1:25
8.0
7.0
6.76.4
6.2
575-3
20-08-2018
1:25SECTION F11D-SLOWER GROUND FLOOR (ADMIN) - PASSAGE - ABLUTIONS - / -
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type B - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
304683047130471304713046830
3046
030
2,531
600
F11E-E
F11E-S
6.76.5
6.7
6.46.4
8.07.07.0
8.0
6.4
7.0
6.4
7.0
F11-E1F11-E2F11-E3
1 25 Lev -1 LG @ 450 A1:25
575-4
20-08-2018
1:25PLAN - DTLS / F11E @ 450mmLOWER GROUND FLOOR (ADMIN) - DOCUMENT SCANNING RM. - / -
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type B - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
600
4052
040
404583047130471304713045840
2,531
F11E-E
F11E-S
6.16.7 below
6.3 below
6.4 below
4.4 below
4.2 F11-E1F11-E2F11-E3
1 25 Lev -1 LG @ 1100 A1:25
575-5
20-08-2018
1:25PLAN - DTLS / F11E @ 1000mmLOWER GROUND FLOOR (ADMIN) - DOCUMENT SCANNING RM. - / -
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type B - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
60086
5
40 520 40
1,05
0
2426
018
261
1826
024
2,531
8540
865
60
24 477 24 1,480 24 477 24
511 5 1,500 5 511
F11-E1 F11-E2 F11-E3
1 F11E-E1:25
2 F11E-S1:25
8.0
7.0
6.76.4
6.2
7.0
6.2
6.76.4
7.0
7.0
4.24.4
575-6
20-08-2018
1:25F11E-S, F11E-E / INTERNAL ELEVS.LOWER GROUND FLOOR (ADMIN) - DOCUMENT SCANNING RM. - / -
SPEC 5
FABRICATION NOTES:-1. WORKTOP / A - 30 mm purpose made worktop of:- 1. 2 mm 'MAX ON TOP' laminate surface veneer to top face, Colour - INDIGO BLACK (code NTM 720 ) on 30 mm WISA - BIRCH plywood, (surface Grade S/BB) with catalysed clear coat to u/side and exposed edges 2. WORKTOP / B - 40 mm purpose made worktop of :- 40 mm laminated SALIGNA - o.e.a. hardwood surface (laminations max 40 mm wide) with 2 coats catalysed clear lacquer finish, sprayed application to all edges.3. WORKTOP / C - 35 mm purpose made worktop of :-3.1 - 20 mm 'CAESARSTONE' quartz surface, with 35 mm edges all round @ 45 deg mitres, finished to manuf. spec. / detail Colour - 'MONTBLANC' (code 5043) adhered to3.2 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail4. WORKTOP / D - 21 mm purpose made worktop of :-4.1 - 6 mm 'NEOLITH' (satin) Colour - 'NERO'4.2 - 6 mm 'NEOLITH' (satin) Colour - 'ARCTIC WHITE'4.3 - 6 mm 'NEOLITH' (silk) Colour - ' ESTATUARIO ' - Sintered stone surface to manuf. spec, adhered to :-4.4 - 15 mm 'EVERITE - NUTEC' plain High Density board, cut to sizes shown, fixed to steel support frame with 35 x 5,5 mm self tapping screws with countersunk heads, as per detail5. WORKTOP SUPPORT FRAME / A5.1 - 40 x 40 mm s/steel S.H.S with welded connections, & welded w/top fixing lugs to Arch. Spec. & detail (Finish - polished s/steel)5.2 - 25 x 3,0 mm s/steel flat bar fixing lug, with welded connections and 8 mm dia. fixing holes5.3 - 30 x 3,0 mm s/steel flat bar support brace with welded connections6. WORKTOP SUPPORT FRAME / B6.1 - 40 x 40 mm galv. m/steel S.H.S legs & base frame ( Finish Type B - galv. & powder coated )6.2 - 60 x 40 mm galv. m/steel R.H.S top frame with welded connections, & welded w/top fixing lugs to detail ( Finish Type B - galv. & powder coated )6.3 - 25 x 3,0 mm m/steel flat bar fixing lug with welded connections and 6 mm dia. fixing holes6.4 - 30 x 30 mm m/steel equal angle support brace with welded connections6.5 - 38 mm dia. adjustable foot / M10 bolt 50 mm length by SKIFFY o.e.a. (code 148 3006 699 11)6.6 - 40 x 40 mm Heavy duty square threaded insert / Series 280 SKIFFY o.e.a. (code 280 4006 220 16)6.7 - 40 x 5 mm galv. m/steel flat bar legs & base support, with welded connections ( Finish Type B - galv. & powder coated )7. CPBD CARCASS - 24 mm WISA - BIRCH plywood, (surface grade B/BB) with FORMICA veneer facing to external face, catalysed clear coat to internal faces & edges8. CPBD DOORS - 18 mm WISA - BIRCH plywood, cupboard doors, with AFRICAN MAHOGANY veneer facing to external face, surface stained internal faces and catalysed clear coatings to spec. / Handles - 100 mm Concealed handle by GELMAR ( codeBSN8227 ) / Hinges - 2 x Slide-on 110 deg hinge with 0 mm cranking, GELMAR (code 180) o.e.a. Locks - Brass cam lock - 30mm, 1 per door - GELMAR (code 9042) o.e.a.SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - AFRICAN MAHOGANY) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
Engineering Unit / Architecture Department166 K.E.Masinga Road, Durban, 4001Tel: 031 311 7098 Fax: 031 311 7111
Contract # CSA / 2361ETHEKWINI MUNICIPALITYKloof Archives Repository and Print Facility11 Emolweni Road,Kloof.
Project Description : Date
Rev.
ScaleDwg. #
DRAWING TITLE
2,000
450
40 940 40 940 40
4037
040
2.
7.
4.
1.1.
7.
3.
3.
F02-2
F37-1F37-2F37-3
F02-1
2,000
40 939 40 941 40
2,40
0
140
412
4041
240
412
4041
240
412
40
3.
4.
7.
1.
2.
1.
7.
7.
1.
7.
F37-3F37-2F37-1
1 PLN F37 - LVL 01:25
2 F37-S1:25
SPEC. 6
FABRICATION NOTES:-
1. BOOKCASE UPRIGHT PANEL / A - 24 mm WISA - BIRCH plywood (grade S/BB) with AFRICAN MAHOGANY veneer to external face only, with catalysed clear finishes to spec.2. BOOKCASE UPRIGHT PANEL / B - 24 mm WISA - BIRCH plywood (grade B/BB) with MAX ON TOP surface laminate, colour (INDIGO BLACK: code NTM720)3. BOOKCASE UPRIGHT PANEL / C - 18mm WISA - BIRCH plywood (grade B/BB) with catalysed clear finish to spec.4. BOOKCASE SHELVING / - 24mm WISA - BIRCH plywood (grade B/BB) with catalysed clear finish to spec.5. SHELVING SUPPORT / - 1800mm steel zinc plated, raised bookcase strips by GELMAR o.e.a. (code 3170)6. SHELVING ADJUSTMENT / - steel zinc plated, raised bookcase clips by GELMAR o.e.a. (code 3171)7. BOOKCASE EDGE FACING / - 40X40mm AFRICAN MAHOGANY p.a.r. solid h/wood sections to all uprights, with catalysed clear coat finishes to spec.
SURFACE FINISHES SPEC / STEEL :-A - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - BLACK BRONZE / code QQX203)B - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PURE WHITE / code QYA210)C - Powder coated finish - by INTERPON series D2525, o.e.a. (colour - PYRITE / code QYW207)SURFACE FINISHES SPEC / TIMBER :-A. - PRIMER - 'PLASCOLAC' o.e.a., Base-coat primer lacquer, (code EZN 1400 H/B BASE-COAT CLEAR)B. - STAIN - Super penetrating wood stain tinted to match external wood faced veneer (colour - KIAAT Brown ) by PLASCON o.e.a. (code SPS SERIES)C. - TOP COAT - 'PLASCOLAC' timber reaction lacquer - clear by PLASCON o.e.a. (code EZN 1000 SERIES)
585
29-08-2018
1:25F37 PLAN / F37-S ELEV.PUBLIC READING ROOM - UPPER GROUND FLR LEVEL 0 - / -
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
Kloof Archives Repository and Print Facility11 Emolweni Road, Kloof
