Anode Repair Solution

THE SOLUTION IS DEVELOPED TO REPAIR YOUR CATHODIC PROTECTION

FOR YOUR SUBMERGED STRUCTURES. FOCUSING ON THE LOWEST

COST AND HIGHEST SAFETY LEVEL. THE SOLUTION SUBSTITUTES EX-

PENSIVE ALTERNATIVE TECHNICAL SOLUTIONS AND DIVING OPERA-

TIONS.

Sectors

Offshore Wind, Oil & Gas and

Maritime

Field of application

Jackets, Mono-piles, Hulls,

Ships, Semi-submersibles,

etc.

Type of anodes

All types of surface mounted

and welded sacrificial anodes

Contact:

subsea@subcpartner.com

SubC Partner A/S

Subsea Engineering

Tvaerkaj 2

6700 Esbjerg

Denmark

www.subcpartner.com

Tel: +45 7023 2122

How it works

In closed position the

clamp is safe and self

locking.

The clamp can open

and close using the

over-centre acting

knee joint

The locked clamp en-

sure mechanical and

electrical connection.

Scope of supply

- Proposal for your anode repair solution (free of charge).

- Engineering and design of your anode repair solution.

- Anodes including clamps fitted for all types of passive anodes.

- Bespoken subsea installation clamping tools for the actual anodes.

- Topside control hardware and software.

- ROV manipulator setup (optional).

- Offshore installation (optional)

Design

The anodes and clamps are designed for the world

most extreme conditions according DNV/GL for the

North Atlantic area, in compliance with the codes:

- DNV-OS-C101

- DNV-RP-C205

- DNV-RP-B401

In addition any client required codes will be included

in the certificate of conformity of each supplied type of

anode and clamp.

The patent rights belong to SubC Partner A/S.

Safety

Each type of clamp is tested for 10 years full scale

load cycles; corresponding to more than 36 million

loads cycles.

The actual loads and electrical resistance are record-

ed and verified for each load.

The electrical resistance is verified to be below 100

mΩ to confirm the mechanical and electrical function-

ality over life time.

Offshore installation

Bespoken subsea installation clamping tools for the

actual anodes for each repair campaign is a part of

the standard supply for each of your repair campaigns.

Optional we supply manipulator and power skid. The

illustration showing the clamping tool, manipulator

and skid mounted on a Saab Seaeye Cougar XT.

Alternative the clamping tool can be handled by third

party manipulator arms.

SUBC can provide the full offshore installation or if

preferred the basic setup for the installation as: An-

odes, Clamps and Clamping tool. We adapt to your

needs.

Value proposition

- Up to 75% savings compared using other methods.

- Scalable for your global assets.

- No use of divers.

- Designed for most extreme weather condition.

- Short repair period.

- Can be adapted for any size and shape of anode.

- Class conformity (BV, DNV/GL, ABS etc.)

- Possibility of one-stop-shop supplier

Conventional cost SUBC cost