Issue 32 | January 2015

In this issueProfiles for Sign and Graphics

Dear Friends, As 2014 comes to an end, I would like to wish you a Merry Christmas and A Happy New Year on behalf of the Blue Rhine family. We look forward to your support and well wishes in the coming year as we continue to bring you some of the most innovative products and solutions for the Signage and Architecture industries.

We look forward to meeting many of you at the Sign and Graphics show on January 11-13, when we will be launching many new products and equipment. As usual, it will be a great opportunity to interact with our team members to gain your insight, feedback and impressions on these new launches, so plan to spend as much time as possible with us during the show. We will be running demos of flat-bed cutters, laser machines, easy to apply print graphics, LED systems and more.

We are also currently running a warehouse sale for many products at extremely low prices for many of the products you know and use from us regularly, from LEDs to Print media. So please contact your sales consultant or 800-RHINE to enquire about the discounted products available. Best Regards,

Anand JosephGeneral Manager+971 50 4590268anand@bluerhine.com

Anodized Aluminum Profile Hanging DisplayFeatures:

• ElegantAnodizedAluminiumProfile

• BannerorTextilemediatobeused

• Profilesheavynaturedoesnotallowwrinkles

• Stitchingmediatotheinsertionrod provides good grip

• CanbeusedasSingleorDouble-sideCableTieClamp

(HCLAMP)

Insertion Rod - 6 mtr (HROD-6M)

Hook with Nut (HHOOK)

SupportRingwithLever (HRING)

Profile6Mtr. (HPRO-6M)

Plastic end closing cap (HPROCAP)

CableforHanging (HWIRE)

Visit our stand D81 & E22 World Trade Centre 11-13 January, 2015

1) 7cm Snap FrameSnap Frame has a total depth of 7cm, with a distance of 5cm between the light source and the graphics. This profile is ideal for using our ‘Slim Light’ Honeycomb LED panels, wide angle LED modules &FlexibleLEDstrips.Theprofileisavailablein5.5mlength.

Each light box will require the following:

• 8cornerconnectors

• Minimum1springatevery20cmdistance

• 2ClearAcrylicforSandwichwithabacklitfilm(thickness2mm +2mm/2.5mm+2.5mm/2.8mm+2.8mm)oronelight passing/clearsheetforpastingthedigitalgraphics(5mm).

• 3mmthickACPSheetasperthesizeoflightboxforbacksupport.

Note:WhenusingHoneyCombLEDPanels,PVCsheet1mm/2mm/3mmthickisrequiredtobekeptinbetweenthebackingACPandtheLEDpanelinordertopreventshortcircuit.

2) SLB-PROFILE A slim light box can be made with only 19mm depth.

Material required:

• AluminumSnapProfile19mmdepth

• Smartsheetismountedon6mmclearacrylic

• 2mmclearAcrylicsheettocoverthegraphics

• Cornerconnectors4pc

• Spring-distancebetween2springshouldbemaximum20cm

• SmallScrews

• LEDrigidbarsisavailablein40cm,48cmand1mtr

• The40cmbarwith24Vcanbecutatevery6LEDs-the48cm and1mtrbarwith12Vcanbecutatevery3LEDs

• Backingsheet2mm/3mm-canbeACP,PVC,Aluminumsheet.

• Adaptor/Powersupplyunit-24V/12VdependingontheLED rigid bars used

• ChromeCornersifrequired

• Smartsheetsizes152/122/92/62/46/31cm

3) Magnetic ProfilesAvailablein2options:11mmBlack&Silver,18mmBlack

StandardlengthoftheMagneticprofileis3meters.Accessoriesrequiredto customize a magnetic lightbox include connectors, magnets, 3mmaluminiumbackingsheet,LEDrigidbars,powersupply,backlitfilm,6mmand3mmclearacrylic,backlitfilmandsmartsheet.

Fabricationandapplicationissimilartoslimlightboxprofile.AswithSLBProfile,theLEDrigidbarisplacedonanytwolongersidesoronall4sidesof the profile, depending on the brightness needed. The graphics can be changed by removing the top acrylic sheet with the help of a suction cap.

5) PRO TENSIONSnap Profile for Flex

Eyelets are fixed at the end of the flex, while the hooks are placed onto the profile. There is a slot for the hook to cling to the profile; this is then tensioned by tightening the cable tie. For more tension more number of eyelets & hooks to be used.

The snap system helps protect the light box from water & dust. Total depthoftheprofileis8.2cmwithlength5m.Hooks,springs,andcorners are required to customize the light box.

4) Snap Frame (Non-light) Snap profiles are available in width of 25mm&32mmwithlength3mtr.

Cornersareavailableinchromeor mitred finish. Springs are required for snap tension.

18mm 11 mm

25 mm 25 mm32mm

Issue 32 | January 2015

6) Textile Profile6cm, 7.5cm & 10cm

For all textile profiles, the graphics are printed digitally onto a backlit textile or fabric. The silicone rubber strip is first stitched to the media, and then inserted at the edges by simply pushing into the profile channel. When all four sides are adjusted into the aluminum profile, the print is tensioned evenly across the face. This front loading application makes the units ideal for recesses or other areas where space is an issue.

Anodized textile profile is of two types:

1. FPRO (FABRIC PROFILE - Back Lit)

Economy Textile Profile Anodized is of two types, Single & Double side.

Single Side with depth - 6cm, 7.5cm & 10cm with length 6m.

The double side textile profile comes with a depth of 12cm and is 6m in length. Total corners required are 12pc set for a single box

2. FPRO SLIM (FABRIC PROFILE - Front Lit)

Textile Profile front lit / non lit, with 1.4cm depth and length 5m. It is slim, light weight & can be freely suspended to the wall as a frame. FPRO Slim 1mtr length silicone strip available in 11mm and 15mm.

7.5 cm6 cm 10 cm

Double SideSlim

Warehouse SALE – contact us for special offers!