ANOLIS was established to design and manufacture top-end LED lighting products. Since its conception, ANOLIS has gone from strength to strength, producing a constantly expanding range of products with a well balanced mix of innovation, imagination and experience. This, together with state-of-the-art lighting technology, has created a market leading range. Reliability is the first priority. ANOLIS uses only the highest quality components and precision manufacturing techniques, ensuring that the brand offers all the benefits associated with LED lighting: extreme efficiency, long life, low maintenance, low heat and no UV output. Combining these characteristics with industry standard dimensions and flexible control options, true specifier-class lighting systems can be created. ANOLIS products can be seen in a wide variety of applications worldwide, and embrace many market sectors including architectural, commercial, industrial, transport, retail, domestic and entertainment lighting. From discreet white colour-controlled accent lighting to full RGB building illumination, ANOLIS products present lighting designers and architects with creative solutions for the most demanding client requirements. All ANOLIS products meet the relevant product directives and bear the CE mark. Some also bear the ETL mark, and approval for the remaining products is currently pending. Maintaining a close working relationship with the leading component manufacturers ensures that ANOLIS stays at the forefront of the ever-evolving LED market. New technologies are constantly allowing higher output and greater efficiency which continues to open up new market opportunities. ANOLIS is the professional choice - both now and for the future.
Transcript
ANOLIS was established to design and manufacture top-end LED lighting products.
Since its conception, ANOLIS has gone from strength to strength, producing a constantly expanding range of products with a well balanced mix of innovation, imagination and experience. This, together with state-of-the-art lighting technology, has created a market leading range.
Reliability is the first priority. ANOLIS uses only the highest quality components and precision manufacturing techniques, ensuring that the brand offers all the benefits associated with LED lighting: extreme efficiency, long life, low maintenance, low heat and no UV output.
Combining these characteristics with industry standard dimensions and flexible control options, true specifier-class lighting systems can be created.
ANOLIS products can be seen in a wide variety of applications worldwide, and embrace many market sectors including architectural, commercial, industrial, transport, retail, domestic and entertainment lighting.
From discreet white colour-controlled accent lighting to full RGB building illumination, ANOLIS products present lighting designers and architects with creative solutions for the most demanding client requirements.
All ANOLIS products meet the relevant product directives and bear the CE mark. Some also bear the ETL mark, and approval for the remaining products is currently pending.
Maintaining a close working relationship with the leading component manufacturers ensures that ANOLIS stays at the forefront of the ever-evolving LED market. New technologies are constantly allowing higher output and greater efficiency which continues to open up new market opportunities.
ANOLIS is the professional choice - both now and for the future.
ANOLIS ADVANTAGES
As the global LED lighting market is currently growing at a phenomenal rate there is a huge choice for today’s lighting designers, specifiers and installers. When considering LED lighting it is important to choose a manufacturer who can provide the quality of both the product and level of service to ensure the required results are achieved. Anolis is able to offer the both the highest quality of product, supported by a global distribution network to ensure service levels to match.
• Anolis manufactures all of its LED products from the highest quality components available; working closely with the worlds leading component suppliers ensures the reliability and consistency demanded by today’s wide range of lighting projects.
• Anolis LED products are designed, tested and manufactured at our state of the art European manufacturing facility in the Czech Republic. Complete control over all stages of the manufacturing process combined with a vigorous testing regime ensures the highest level of quality control, giving designers and specifiers the confidence to choose Anolis.
• Keeping all stages of the manufacturing process in house allows Anolis to respond rapidly to custom products. The in house Design and R&D team are able to work closely with clients to produce custom designed products for the most demanding of projects.
• Anolis is able to offer a complete LED solution manufacturing both LED luminaries as well as the LED drivers and controllers ensuring a matched system is available for the widest range of applications.
• Anolis custom software is utilized in all Anolis drivers to constantly monitor LED performance, drive currents continually adjusted to ensure optimum performance of LED’s ensuring the maximum benefits of LED technology are achieved at all times.
• All relevant technology patents, meaning they can be specified and supplied with the utmost confidence, cover Anolis products.
• Anolis products meet or exceed internationally recognized standards including CE, *ETL/UL, and SELV giving peace of mind to designers, specifiers and installers.
* (Anolis is continually developing its product range therefore please check individual products for conformity)
ANOLIS LED GREEN STATEMENT
Governments and Lighting professionals worldwide all agree that the recent advances in LED technology hold tremendous potential to conserve energy on a global scale.
Until now LED light sources have been restricted to specialty applications, due to their poor overall light output however LED’s have progressed greatly and are now able to compete with conventional lighting technology in virtually all applications.
Today’s advanced LED lamp sources are often in of being 5X more efficient than incandescent and halogen lamp sources, and are a par with the efficiency of most fluorescent technologies, and the LED based technology continues to be the fastest developing technology within the lighting industry.
It is not only low power consumption that makes LED lighting environmentally acceptable in general they have much longer lifetimes than conventional sources, which translates to less maintenance and replacement costs and also less waste as they are inherently free of mercury and other harmful elements. In short, low voltage energy efficient LED lighting systems help lighting professionals make ecologically-sound design choices today, while promising to have an greater positive impact on the future of the environment. It is estimated that currently up to 20% of global electricity production is consumed by lighting! LED lighting technology now offers the ability for today’s lighting specifiers, designers and Architects the ability to make a real difference for tomorrow.
With Government directives having already been introduced around the world effectively beginning the phasing out of inefficient incandescent and halogen light sources NOW is the time to choose LED lighting solutions.
Schönbrunn Palace - Vienna, Austria (Photo credits: Philipp Klak)
ArcSource 96 Integral | Pg. 10
ArcPad 48, ArcPad 48 Integral | Pg. 11
ArcPad 94 Integral | Pg. 9
ArcPad Xtreme | Pg. 8
ArcP
ad
The ArcPad range is a line of durable and robust fixtures with a projected lifespan of minimum 60.000 hours. ArcPad is a avaialble in a varierty of formats from the compact
Arcpad 48 through to the now industry standard Arcpad Extreme whose perfomance is unrivalled by its competitors and imitators alike. The Arcpad range is designed to produce
the generation of rich, saturated colours and colour changing effects in wall-washing, spot lighting, and large alcove lighting which many architectural applications demand.
ArcPad
WW
W.A
NO
LIS.
EU
8
DIMENSIONS (in mm):
ArcP
ad
ArcPad XtremeTM Power Supply Required: 100-240V AC 50/60Hz Construction: Cast AluminiumMax Power Consumption: 580W Fixing Method: StirrupAvailable Beam Angles: 10°,23°,44°,14°x26° Product Weight: 57kgImpact Rating: IK 06 Operating Ambient Temp Range: -20°C/+40°CIngress Protection Rating: IP67 Operating Temp: 85°C @ Ambient 40°CLight Source: 188 High Power LED´s LED Colour Variants: RGBW (depends on request)LED Life Expectancy: Min 77000 Hrs Cooling System: Convection Typical Lumen Maintenance: 70% @ 77000 hrs Cable: Combined Power / Data (See Manual)Two independent LED modules Power On Board or external Control: USITT DMX 512 Wireless version available : CRMXTM
technology from Lumen Radio
ArcPad Xtreme is a special outdoor fixture with two independent LED modules. LEDs are densely populated, providing extremely bright light output. The fixture is completely silent due to the conventional cooling. The IP 67 rating means it can be used for exterior installations.
ArcPad Xtreme is an ideal fixture for illuminating large buildings and stages, thanks to the high light output of the LED modules. The unique combination of RGBW LED colours delivers a stunning quality of white light, not seen in other competitive products on the market.
ArcPad Xtreme
67
TECHNICAL SPECIFICATIONS:
06
9
WW
W.A
NO
LIS.
EU
TECHNICAL SPECIFICATIONS:
ArcP
ad
ArcPad 94 IntegralTM Power Supply Required: 100-240V AC 50/60Hz Construction: Cast AluminiumMax Power Consumption: 290W Fixing Method: StirrupAvailable Beam Angles: 10°,23°,44°,14°x26° Product Weight: 39kgImpact Rating: IK 06 Operating Ambient Temp Range: -20°C/+40°CIngress Protection Rating: IP67 Operating Temp: 85°C @ Ambient 40°CLight Source: 94 High Power LED´s LED Colour Variants: RGBW (depends on request)LED Life Expectancy: Min 77000 Hrs Cooling System: ConvectionTypical Lumen Maintenance: 70% @ 77000 hrs Cable: Combined Power / Data (See Manual)Control: USITT DMX 512 Available in EPS version (External Power Suply)
DIMENSIONS (in mm):
Arcpad 94 Integral is an LED outdoor fixture, LED‘s are densely populated producing a high light output. Arcpad 94 is an ideal fixture to illuminate tall buildings and structures. The RGBW LED configuration delivers stunning light quailty not seen in other competitive products on the market.
ArcPad 94 Integral
67
06
new
WW
W.A
NO
LIS.
EU
10
ArcSource 96 Integral
ArcP
ad
The Anolis ArcSource 96 Integral is the latest addition to the comprehensive range of Anolis LED lighting projectors. Using the advanced technology of the highly successful ArcPAD 48 the ArcSource 96 Integral brings even more power and light output that is often required by today´s demanding lighting projects. Housed in compact IP67 rated aluminium housing, the 96 high brightness LED provide unbelievable light output previously unavailable in an LED fixture of this size. Control is via DMX/RDM allowing for advanced programming options, latest technology electronics ensure stable white balance is achieved as well as a minimum life expectancy of 76.000 hours.
Available in a variety of colour options including RGB/CW, RGB/WW, RGB/A as well as CW and WW, the ArcSource 96 Integral is a truly versatile fixture that can be specified in the most demanding of interior and exterior lighting schemes.
ArcSource 96 IntegralTM Power Supply Required: 100-240V AC 50/60Hz Construction: Cast AluminiumMax Power Consumption: 200W Fixing Method: Mounting Plate or StirrupAvailable Beam Angles: 13°,25,°44°,12°x32° Product Weight: 11kgImpact Rating: IK 06 Operating Ambient Temp Range: -20°C/+40°CIngress Protection Rating: IP67 Operating Temp: 80°C @ Ambient 40°CLight Source: 96 High Power LED´s LED Colour Variants: RGBW (depends on request)LED Life Expectancy: Min 76000 Hrs Cooling System: ConvectionTypical Lumen Maintenance: 70% @ 76000 hrs Cable: Combined Power / Data (See Manual)Control: USITT DMX 512 Wireless version available : CRMXTM technology from Lumen Radio
67TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
06
11
WW
W.A
NO
LIS.
EU
ArcPad 48, ArcPad 48 Integral
TECHNICAL SPECIFICATIONS:
ArcP
ad
The ArcPad 48 and ArcPad 48 Integral are designed for the generation of rich, saturated colours and colour changing effects in wall-washing, spot lighting, and large alcove lighting in many architectural applications. These units are a durable and robust fixture with a projected lifespan of minimum 85.000 hours. The base of the fixture is made from a cast metal and it is built for floor or wall mounting via two holes in the base. The fixture´s head is made up of a radiator (cast aluminium), on which the LED matrix and lenses are fitted. The head can be moved in relation to the base in ranges: pan +45°/-45°, tilt +60°/-90°.
ArcPad 48TM Power Supply Required: ArcPower 48 Construction: Cast / Extruded AluminiumMax Power Consumption: 60W Fixing Method: Integral Mounting BracketAvailable Beam Angles: 13°,26°,45°,13°x38° Product Weight: 1,8kgImpact Rating: IK 06 Operating Ambient Temp Range: -20°C/+40°CIngress Protection Rating: IP67 Operating Temp: 70°C @ Ambient 40°CLight Source: 48 High Power LED´s LED Colour Variants: RGBW (depends on request)LED Life Expectancy: Min 85000 Hrs Cooling System: ConvectionTypical Lumen Maintenance: 70% @ 85000 hrs Cable Type: Cat 5e 1m with RJ45 Male Connector
ArcPad 48 IntegralTM Power Supply Required: 100-240V AC 50/60Hz Construction: Cast / Extruded AluminiumMax Power Consumption: 60W Fixing Method: Integral Mounting BracketAvailable Beam Angles: 13°,26°,45°,13°x38° Product Weight: 3kgImpact Rating: IK 06 Operating Ambient Temp Range: -20°C/+40°CIngress Protection Rating: IP67 Operating Temp: 80°C @ Ambient 40°CLight Source: 48 High Power LED´s LED Colour Variants: RGBW (depends on request)LED Life Expectancy: Min 85000 Hrs Cooling System: ConvectionTypical Lumen Maintenance: 70% @ 85000 hrs Cable: Combined Power / Data (See Manual)Control: USITT DMX 512 Wireless version available : CRMXTM technology from Lumen Radio
67
ArcPad 48 Integral
ArcPad 48
DIMENSIONS (in mm):
06
Fountain, Lindcombe, Sydney, Australia (Photo credits: ULA)
ArcSource Outdoor 24 MC, 48 MC | Pg. 17
ArcSource Inground 12, 36, 24 MC | Pg. 19
ArcSource Outdoor 24, 48 | Pg. 16
ArcSource Inground 3,6,7 | Pg. 18
ArcSource Outdoor 3, 6, 7, 12, 36 | Pg. 15
ArcSource 1, ArcSource 1 MC | Pg. 14
ArcS
ourc
e O
utdo
or &
Ingr
ound
Manufactured from 316 stainless steel and with an IP rating the ArcSource Outdoor range make the perfect companion for the ArcSource Inground and ArcSource Outdoor products.
The Anolis ArcSource Inground range brings the high standards of the ArcSource range to the world of exterior lighting. Industry standard Inground fittings with an IP rating of 67 combined with drive
over load bearings allows the dramatic effects of ArcSource to be introduced to landscape illumination.
ArcSource Outdoor & Inground
WW
W.A
NO
LIS.
EU
14
ArcS
ourc
e O
utdo
or &
Ingr
ound
TECHNICAL SPECIFICATIONS:
The Anolis ArcSource 1 is a single colour high powered LED fixture utilising the latest high output LED. Available in 4 optical formats, beam, asymmetric beam x2 or marker, the ArcSource 1 has integrated electronic control allowing the fixture to operate on a range of AC/DC input voltages; the onboard electronic control also ensures that constant output intensity is maintained through all fixtures no matter where they are located in relation to the power supply. The new Anolis ArcSource 1MC, utilizes the latest LED Multi Chip technology and a standard beam angle of 24°. The multichip LED offers seamless colour mixing offering the best homogeneous colour output from a single point source. The high IP rating means that this product can be submerged in water up to a depth of 5m. ArcSource 1 makes an ideal marker light for a wide range of applications either indoor or outdoor. The Anolis ArcSource 1MC is powered by the Anolis ArcPower range of drivers.
ArcSource 1, ArcSource 1 MC
ArcSource 1TM Input Voltage: 9-35V DC or 6-24 V AC Light Source: High Power LED‘s Product Weight: 0.3 kgMaximum Power Consumption: 1.6 Watts LED Life Expectancy: Min 50000 Hrs Operating Ambient Temp Range: -20°C/+40°CAvailable Beam Angles: 10°, 25°, Asymmetric Typical Lumen Maintenance: 70% @ 50000 hrs Operating Temp: +55°C @ Ambient 40°CImpact Rating: IK08 Construction: stainless steel top flange,brass housing LED Colour Variants: R, G, B, A,CW,WWIngress Protection Rating: IP68 Glass covers: flat tempered glass (clear), Cooling System: Convection domed temp.glass (frosted) Power cable: Ölflex Robust 210;2x0.5 mm2
ArcSource 1 MCTM Max. power consumption: 4.4W Led life expectancy: minimum 60,000 hoursMax input current per colour: 350 mA Transparent cover: 6 mm clear flat tempered glass (24°, 35° beam angle)Available Beam Angles: 24°, 35°, Construction: stainless steel top flange brass housingCompatible power supplies: ArcPower 36/ 72/ 144/ 360 Weight: 0.2 kgOperating ambient temp.range: -20°C/+40°C Ingress Protection: IP 68Cooling: convection Power /data plug: RJ45 (or Choogori 8pin conector IP68)LED device: Cree MC-E RGBW multichip Power /data cable 24 AWG x 4P,category 5e (1.5 m long) Typical Lumen maintenance: 70%@ 60,000 hours
68
ArcSource 1 Super Wide ArcSource 1 Shield ArcSource 1 MC
DIMENSIONS (in mm):
120 ,6
7,272,9
91,9
ø 45
36ø
35ø
08
new
15
WW
W.A
NO
LIS.
EUAr
cSou
rce
Out
door
& In
grou
nd
ArcSource 3, 6, 7:The ArcSource Outdoor 3, 6, 7’s high IP Rating allows the units to operate completely submerged in water, making illumination of water features a possibility. ArcSource 12, 36: When more output is required for outdoor applications the ArcSource Outdoor 12, 36 can be introduced. Once again manufactured from 316 stainless steel and with an IP rating of 68 the ArcSource Outdoor 12, 36 is at home either in or out of the water making it available to meet the requirements of the widest range of exterior lighting projects. Once again power and control is provided by ArcPower 36, 72, 144, 360.
ArcSource Outdoor 3, 6, 7, 12, 36
ArcSource Outdoor 12 ArcSource Outdoor 36
ArcSource Outdoor 12, 36TM ▪ Power Supply Required: ▪ Construction: Stainless Steel (316) Tempered Glass - ArcPower 36, 72, 144, 360, 16x12, RackMount384 ▪ Fixing Method: Stirrup▪ Max Power Consumption: 13,6W / 40,8 W ▪ Product Weight: 1,7kg / 3,3kg▪ Available Beam Angles: 6°, 15°, 25°, 38° / asymmetric ▪ Operating Ambient Temp Range: -20°C/+30°C▪ Impact Rating: IK06 ▪ Operating Temp: +65°C @ Ambient 40°C▪ Ingress Protection Rating: IP68 ▪ LED Colour Variants: RGBW, CW, WW, R, G, B, A ▪ Light Source: High Power LED‘s ▪ Cooling System: Convection▪ LED Life Expectancy: Min 50000 Hrs ▪ Cable Type: Belden 7930A or Similar▪ Typical Lumen Maintenance: 70% @ 50000 hrs ▪ Power/Data plug: RJ45 (or Choogori 8pin conector IP68)
ArcSource Outdoor 3, 6, 7TM Power Supply Required: Light Source: High Power LED‘s Product Weight: 0.5kg / 0.6kg / 0.6kg - ArcPower 36, 72, 144, 360,16x12,16x6 RackMount384 LED Life Expectancy: Min 60000 Hrs Operating Ambient Temp Range: -20°C/+30°CMax Power Consumption: 4.2 W / 8.4 W / 9.6 W Typical Lumen Maintenance: 70% @ 60000 hrs Operating Temp: +67°C @ Ambient 40°CAvailable Beam Angles: 15°,25° (AS3-also 38°,15°) Construction: Stainless Steel (316) LED Colour Variants: RGB, R, G, B, A,WhiteImpact Rating: IK06 - Tempered Glass Cooling System: ConvectionIngress Protection Rating: IP68 Fixing Method: Stirrup Cable Type: Belden 7930A or Similar (RJ45)
68
ArcSource Outdoor 3, 6, 7
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm): (in mm):
06
WW
W.A
NO
LIS.
EU
16
DIMENSIONS:
The Anolis ArcSource Outdoor 24 and 48 are the latest additions to the already popular ArcSource outdoor range. The ArcSource Outdoor 24 / 48 offer’s a high light output with a full range of optics. Mounted within an IP66 High-grade aluminium housing this product is ideal for exterior applications, offering solutions to many lighting scenarios. With its stirrup mounting the product has a complete range of movement, which can easily be fixed to stop any movement once product is in the ideal position.
Power and control are supplied by the Anolis ArcPower range of drivers.
ArcSource Outdoor 24, 48
ArcS
ourc
e O
utdo
or &
Ingr
ound
66
06
TECHNICAL SPECIFICATIONS:
ArcSource Outdoor 24TM Power Supply Required: ArcPower 24TC,4x24TC (Temperature Controlled)Max. Power Consumption: 72WAvailable Beam Angles: Spot,Medium,FloodImpact Rating: IK 06Ingress Protection Rating: IP66Light Source: High power LEDsLED Life Expectancy: Min 60000 HrsTypical Lumen Maintenance: 70% @ 60000 HrsConstruction: Cast aluminium, transparent cover-tempered glassProduct Weight: 2,8kgOperating Ambient Temp Range: -20°C/+40°COperating Temp: 65°C @ Ambient 40°CLED Colour Variants: RGBW, WW, CW (depend on request)Cooling System: ConvectionCable Type,plug: 0.5 m of Belden Cable, connector IP 68
ArcSource Outdoor 48TM Power Supply Required: ArcPower 48TC,4x48TC (Temperature Controlled)Max. Power Consumption: 144WAvailable Beam Angles: Spot,Medium,FloodImpact Rating: IK 06Ingress Protection Rating: IP66Light Source: High power LEDsLED Life Expectancy: Min 60000 HrsTypical Lumen Maintenance: 70% @ 60000 HrsConstruction: Cast aluminium, transparent cover-tempered glassProduct Weight: 4,5kgOperating Ambient Temp Range: -20°C/+40°COperating Temp: 68°C @ Ambient 40°CLED Colour Variants: RGBW, WW, CW (depend on request)Cooling System: ConvectionCable Type,plug: 0.5 m of Belden Cable, connector IP 68
ø 2
04
ø13
72151
123 37
,5
13
230
ø 2
72
ø13
72188
37,5
29616
0
13
new
ArcSource Outdoor 24 ArcSource Outdoor 48
17
WW
W.A
NO
LIS.
EU
DIMENSIONS:
The Anolis ArcSource Outdoor 24MC and 48MC are additional products to the already popular ArcSource outdoor range. The ArcSource Outdoor 24MC / 48MC offers a high light output from the latest LED multi chip technology, along with a full range of optics. Mounted within an IP66 High-grade aluminium housing this product is ideal for outdoor lighting applications, offering solutions to many landscape lighting scenarios. With its stirrup mounting the product has a complete range of movement which can easily be fixed to stop any movement once product is in the ideal position.
Power and control are supplied by a new range of Anolis ArcPower drivers complete with thermal feedback control.
ArcSource Outdoor 24 MC, 48 MC
ArcS
ourc
e O
utdo
or &
Ingr
ound
66
06
ArcSource Outdoor 24 MCTM Power Supply Required: ArcPower 24TC,4x24TC (Temperature Controlled)Max. Power Consumption: 60WAvailable Beam Angles: Spot,Medium,FloodImpact Rating: IK 06Ingress Protection Rating: IP66Light Source: High power LEDsLED Life Expectancy: Min 60000 HrsTypical Lumen Maintenance: 70% @ 60000 HrsConstruction: Cast aluminium, transparent cover-tempered glassProduct Weight: 2,8kgOperating Ambient Temp Range: -20°C/+40°COperating Temp: 65°C @ Ambient 40°CLED Colour Variants: RGBWCooling System: ConvectionCable Type,plug: 0.5 m of Belden Cable, connector IP 68
ArcSource Outdoor 48 MCTM Power Supply Required: ArcPower 48TC,4x48TC (Temperature Controlled)Max. Power Consumption: 120WAvailable Beam Angles: Spot,Medium,FloodImpact Rating: IK 06Ingress Protection Rating: IP66Light Source: High power LEDsLED Life Expectancy: Min 60000 HrsTypical Lumen Maintenance: 70% @ 60000 HrsConstruction: Cast aluminium, transparent cover-tempered glassProduct Weight: 4,5kgOperating Ambient Temp Range: -20°C/+40°COperating Temp: 68°C @ Ambient 40°CLED Colour Variants: RGBWCooling System: ConvectionCable Type,plug: 0.5 m of Belden Cable, connector IP 68
ø 2
04
ø13
72151
123 37
,5
13
230
ø 2
72
ø13
72188
37,5
29616
013
new
ArcSource Outdoor 24MC ArcSource Outdoor 48MC
TECHNICAL SPECIFICATIONS:
WW
W.A
NO
LIS.
EU
18
ArcS
ourc
e O
utdo
or &
Ingr
ound
TECHNICAL SPECIFICATIONS:
The Anolis ArcSource Inground range brings the high standards of the ArcSource range to the world of exterior lighting. Industry standard Inground fittings with an IP rating of 67 combined with drive over load bearings allows the dramatic effects of ArcSource to be introduced to landscape illumination.
ArcSource Inground 3, 6, 7
ArcSource Inground 3 ArcSource Inground 6, 7
ArcSource Inground 3, 6, 7TM Power Supply Required: Construction: Stainless Steel (316) - ArcPower 36, 72, 144, 360,ArcPower 16x12,16x6 RackMount384 - Tempered Glass,Plastic,AluminiumMax Power Consumption: 4.2 Watts / 8.4 Watts / 9.6 Watts Top flange shapes: Round or squareAvailable Beam Angles: 15°, 25° / asymmetric (for Inground 3 also 15°,38°) Product Weight: 0.5kg / 1,2kg / 1,2kgImpact Rating: IK08 Operating Ambient Temp Range: -20°C/+30°CIngress Protection Rating: IP67 Operating Temp: +60°C @ Ambient 25°CLight Source: High Power LED‘s LED Colour Variants: RGB, RGBW, WhiteLED Life Expectancy: Min 50000 Hrs Cooling System: ConvectionTypical Lumen Maintenance: 70% @ 50000 hrs Cable Type: Belden 7930A or Similar (RJ45) Power/Data plug: RJ45 (or Chogori IP68)
67
O48.5
90.6O
98O
140
120O
3.6
100O86.4
O
63.4O
122
118.3
52O
DIMENSIONS (in mm):
08
19
WW
W.A
NO
LIS.
EUAr
cSou
rce
Out
door
& In
grou
nd
The Anolis ArcSource Inground 12 and ArcSource Inground 36 bring the option of an AR-111 size LED fitting to the world of exterior lighting. IP67 rated and with drive over load bearings these inground fixtures are capable of meeting the most demanding of exterior applications. Building and feature illumination becomes a real possibility with Anolis ArcSource Inground 12 and ArcSource Inground 36.
The Anolis ArcSource Indoor range combines state of the art lighting technology with industry standard dimensions to create truly specifier class lighting systems. Using only
the finest materials and precision manufacturing techniques the Anolis ArcSource provides the professional solution for your lighting requirements. Ar
cSou
rce
Indo
orArcSource Indoor
WW
W.A
NO
LIS.
EU
22
ArcS
ourc
e In
door ArcSource 4 MC
ArcSource 4MC - With spectacular performance and seamless colour mixing, ArcSource 4 MC renders the best homogeneous colour output and most precise single-point-of-colour emission. Advanced cooling and driving technologies have been optimised to give maximum light output, and together with the longevity of the LEDs, this is a hugely energy efficient architectural fixture.
ArcSource 4 MCTM Power Supply Required: Fixing Method: MR16 Housing - ArcPower 36, 72, 144, 360, ArcPower 16x12, 16x6, RackMount384 Product Weight: 0.25kgMax Power Consumption: 4.4W Operating Ambient Temp Range: -20°C/+40°CAvailable Beam Angles: 16° , 29° Operating Temp: 44°C @ Ambient 25°CIngress Protection Rating: IP2X LED Colour Variants: RGBWLight Source: High power MC (Multi-Chip) Cooling System: ConvectionLED Life Expectancy: Min 60000 Hrs Cable Type: Cat 5e 1.5m with RJ45 male connectorTypical Lumen Maintenance: 70% @ 60000 hrs Construction: Precision Turned Aluminium
MR-16 Housing (included)
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm): Accessories:
23
WW
W.A
NO
LIS.
EU
TECHNICAL SPECIFICATIONS:
ArcS
ourc
e In
door
The Anolis ArcSource 3 RGB, 6 RGB, 7 RGBW combines state of the art lighting technology with industry standard MR16 fittings to create truly specifier class lighting systems. Using only the finest materials and precision manufacturing techniques the Anolis ArcSource 3 RGB, 6 RGB, 7 RGBW provides the professional solution for your lighting requirements.
The highest quality interchangeable optical system ensures that the desired effect can be achieved in the widest range of application possibilities. Utilising high powered LEDs the Anolis ArcSource 3 RGB, 6 RGB, 7 RGBW is unsurpassed in performance, reliability and quality.
ArcSource 3, 6, 7
ArcSource 3, 6, 7TM Power Supply Required: Construction: - ArcPower 36, 72, 144, 360, ArcPower 16x12,16x6, RackMount384 - precision turned aluminiumMax Power Consumption: 4.2 Watts / 8.4 Watts / 9.6 Watts Product Weight: 0,15kg / 0,25kg / 0,25kgAvailable Beam Angles: 15°, 25° (AS3 also 15°,38°) Operating Ambient Temp Range: -20°C/+40°CIngress Protection Rating: IP2X Operating Temp: +50 /+56 /+60°C @ Ambient 25°CLight Source: High Power LED‘s LED Colour: RGB, RGBW, White (depend on request)LED Life Expectancy: Min 50000 Hrs (ArcSource 6, 7) Cooling System: ConvectionLED Life Expectancy: Min 60000 Hrs (ArcSource 3) Cable Type: Belden 7930A or Similar (RJ45)Typical Lumen Maintenance: 70% @ 50000 hrs Power/ Data plug: RJ45
ArcSource 3 ArcSource 6, 7
Accessories:DIMENSIONS (in mm):
MR-16 Housing (included)
50
41
62
50
72
82
WW
W.A
NO
LIS.
EU
24
ArcS
ourc
e In
door
The Anolis ArcSource 12 combines state of the art lighting technology within an industry standard AR-111 size fitting to create a truly specifier class lighting product. The highest quality optical system ensures that the desired effect can be achieved in the widest range of application possi-ble. Utilising high powered LEDs the Anolis ArcSource 12 RGB is unsurpassed in performance, reliability and quality.
The ArcSource 24MC is an incredibly powerful architectural luminaire with fabulous homogeneous colour output using Cree‘s cutting edge multichip LED technology. Precise single-point-of-colour emission and the uniform output of the lens options enables its usage in the most demanding envi-ronments. Advanced cooling and driving techniques give a spectacularly high light output.
ArcSource 12, ArcSource 12 SmartWhiteArcSource 24 MC
ArcSource 12 RGB, SmartWhite ArcSource 24MC
ArcSource 12, ArcSource 12 SmartWhiteTM Power Supply Required: Construction: precision turned aluminium - ArcPower 36, 72, 144, 360, 16x12, RackMount384 Flammability: 94V-0 flame class rating - ArcPower SW 36, 72, 144, 360, 16x12, RackMount384 Product Weight: 0,6 kgMax Power Consumption: 13,6 W Operating Ambient Temp Range: -20°C/+40°CAvailable Beam Angles: 6°, 15°, 25°, 38° / assymetric Operating Temp: +60°C @ Ambient 25°CIngress Protection Rating: IP2X LED Colour Variants: RGBW,CW,WW,R,G,B,A (depends on request)Light Source: High Power LED‘s Cooling System: ConvectionLED Life Expectancy: Min 50000 Hrs Cable Type: Belden 7930A or SimilarTypical Lumen Maintenance: 70% @ 50000 hrs Power/Data plug: RJ45Installation method: standard AR-111 housing
ArcSource 24 MCTM Power Supply Required: Construction: precision turned aluminium- ArcPower 24TC,4x24TC (Temperature Controlled) Flammability: 94V-0 flame class ratingMax Power Consumption: 58W Product Weight: 0,6 kgAvailable Beam Angles: 27°, 35° Operating Ambient Temp Range: -20°C/+25°CIngress Protection Rating: IP2X Operating Temp: +60°C @ Ambient 25°CLight Source: High Power LED‘s LED Colour Variants: only RGBWLED Life Expectancy: Min 50000 Hrs Cooling System: ConvectionTypical Lumen Maintenance: 70% @ 50000 hrs Cable Type: Belden 7930A or SimilarInstallation method: standard AR-111 housing Power/Data plug: RJ45
ArcSource Wall 3 / ArcSource Wall 4 MC ArcSource Twin Wall 3 / ArcSource Twin Wall 8 MC
Finished in 316 stainless steel and with an IP rating of 54, the ArcSource Wall 3 RGB brings full colour mixing to a compact wall mounted fitting, using high powered LEDs the unit can be used to up light or down light from a wall moun-ted position making the unit ideal when recessed fittings are not possible.
As well as colour mixing from the RGB source the Anolis ArcSource Wall 3 can also be fitted with either warm white 3300 K or cold white 6500 K high powe-red LEDs making it the ideal alternative to conventional low voltage halogen wall lights.
ArcSource Wall 3, Twinwall 3TM Power Supply Required: Construction: stainless steel - ArcPower 36, 72, 144, 360, 16x12, 16x6, RackMount384 Flammability: 94V-0 flame class rating - ArcPower SW 36, 72, 144, 360, 16x12, RackMount384 Product Weight: 0.7 kg /1.2 kgMax Power Consumption: 4.2 Watts / 8.4 Watts Operating Ambient Temp Range: -20°C/+30°CAvailable Beam Angles: 6°, 15°, 25°, 38° / assymetric Operating Temp: +60°C @ Ambient 25°CImpact Rating: IK05 LED Colour Variants: RGBW,CW,WW,R,G,B,A (depends on request)Ingress Protection Rating: IP54 Cooling System: ConvectionLight Source: High Power LED‘s Cable Type: Belden 7930A or SimilarLED Life Expectancy: Min 50000 Hrs Power/Data plug: RJ45 Typical Lumen Maintenance: 70% @ 50000 hrs
ArcSource Wall 4, Twinwall 8 MCTM Power Suplly Required: ArcPower 36/72/144/360Max.Power consumption: 4,4 Watt (AS Wall 4MC), 8,8 Watt (AS Twinwall 8 MC)Available Beam Angles: 16°, 29°Impact Rating: IK05Ingress Protection Rating: IP43Light Source: High Power MC (Multichip) LED´sLED Life Expectancy: Min.50.000 hrsTypical Lumen Maintenance: 70% @ 50.000 hrs
With a balanced design profile and by using the highest quality materials the ArcLine Outdoor brings the flexibility of the ArcLine range to the Outdoor world.
Available in either single or double configurations and using the latest high powered LEDs the ArcLine Outdoor is the perfect solution for both landscape and building illumination. With an IP
rating of 65 the ArcLine Outdoor will suitable for the most demanding of exterior installations.
Utilizing the latest research for the design and manufacturing process, the ArcLine Outdoor Optic MC brings the supreme reliability and quality of the ArcLine range to the Outdoor world. Smooth colour mixing is ensured by using new generation of High power LED multichips, combined with the best homogeneous colour distribution system and precise single-point-of- colour emission. Combined with the high light output and longevity of the LEDs and user-defi-nable colour variants, the Anolis ArcLine Outdoor brings new qualities and sets standards for all types of contemporary exterior lighting schemes.
ArcL
ine
Out
door ArcLine Outdoor Optic 20 MC, 40 MC
ArcLine Outdoor Optic 20, 40 MCTM Power Supply Required: Construction: precision extruded aluminium - ArcPower 36, 72, 144, 360, RackMount384 Transparent cover-tempered glassMax Power Consumption: 22W / 44W Fixing Method: Mounting BracketAvailable Beam Angles: 27°, 36°, 21°x 36° Product Weight: 3.2 kg / 5.8 kgImpact Rating: IK 07 Operating Ambient Temp Range: -20°C/+40°CIngress Protection Rating: IP65 Operating Temp: 53°C @ Ambient 40°CLight Source: High power MC (Multi-Chip) LED Colour Variants: RGBWLED Life Expectancy: Min 60000 Hrs Cooling System: ConvectionTypical Lumen Maintenance: 70% @ 60000 hrs Cable Type: Cat 5e 1.5m with RJ45 male connector
65
variable distance
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
07
29
WW
W.A
NO
LIS.
EUAr
cLin
e O
utdo
or
With a balanced design profile and by using the highest quality materials the ArcLine Outdoor Optic brings the flexibility of the ArcLine range to the Outdoor world.
Available in either single or double configurations and using the latest Luxeon high powered LEDs the ArcLine Outdoor is the perfect solution for both landscape and building illumination. With an IP rating of 65 the ArcLine Outdoor will be suitable for the most demanding of exterior installations. Power and control is provided by the ArcPower 36, 72, 144, 360.
ArcLine Outdoor Optic 12, 18, 24, 36
ArcLine Outdoor Optic 12, 18, 24, 35TM Power Supply Required: Construction: precision extruded aluminium - ArcPower 36, 72, 144, 360, RackMount384 Transparent cover-tempered glassMax Power Consumption: 13.6W /20.4W /27.2W /40.8W Fixing Method: Mounting BracketAvailable Beam Angles: 6°, 15°, 25°, 38° / asymmetric Product Weight: 2.1kg 3.1kg 4.3kg 6.4kgImpact Rating: IK 07 Operating Ambient Temp Range: -20°C/+40°CIngress Protection Rating: IP65 Operating Temp: 53°C @ Ambient 40°CLight Source: High power LEDs LED Colour Variants: RGB,WW,CW (depend on request)LED Life Expectancy: Min 60000 Hrs Cooling System: ConvectionTypical Lumen Maintenance: 70% @ 60000 hrs Cable Type: Cat 5e 1.5m with RJ45 male connector
65
variable distance
420/ 843/
420/ 820/
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
07
WW
W.A
NO
LIS.
EU
30
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
ArcL
ine
Out
door
With a balanced design profile and by using the highest quality materials the ArcLine Outdoor Optic brings the flexibility of the ArcLine range to the Outdoor world.
Available in either single or double configurations and using the latest high powered LEDs the ArcLine Outdoor is the perfect solution for both Landscape and building illumination. With an IP rating of 65 the ArcLine Outdoor will be suitable for the most demanding of exterior installations. Power and control is provided by the ArcPower 36, 72, 144, 360.
ArcLine Double Outdoor Optic 24, 36, 48, 72
variable distance
420/
440/
ArcLine Double Outdoor Optic 24, 36, 48, 72TM Power Supply Required: Construction: precision extruded aluminium - ArcPower 36, 72, 144, 360, RackMount384 Transparent cover-tempered glassMax Power Consumption: 27,2W / 40.8W / 54,4W / 81,6W Fixing Method: Mounting BracketAvailable Beam Angles: 6°, 15°, 25°, 38° / asymmetric Product Weight: 3,21kg, 4.6kg, 5.8kg, 8.5kgImpact Rating: IK 07 Operating Ambient Temp Range: -20°C/+40°CIngress Protection Rating: IP65 Operating Temp: 53°C @ Ambient 40°CLight Source: High power LEDs LED Colour Variants: RGB,WW,CW (depend on request)LED Life Expectancy: Min 60000 Hrs Cooling System: ConvectionTypical Lumen Maintenance: 70% @ 60000 hrs Cable Type: Cat 5e 1.5m with RJ45 male connector
65
07
31
TECHNICAL SPECIFICATIONS:
WW
W.A
NO
LIS.
EU
ArcLine Outdoor Optic POB 9, 13, 27, 33
DIMENSIONS (in mm):
When the external driving of the fixture is not needed the ArcLine Optic SmartWhite POB „Power on Board“ provides the solution combining both warm white and cold white high powered LEDs.
All this technology is combined with the balanced design profile of the Anolis ArcLine Outdoor Optic with the highest quality optics to create truly versatile linear lighting system whatever the environment demands.
ArcL
ine
Out
door
ArcLine Outdoor Optic POB “Power On Board“ 9, 13, 27, 33TM Voltage 110/230V Fixing Method: Mounting BracketMax Power Consumption: 12W /17W /34W /39W Product Weight: 1.7kg, 2.3kg, 4.7kg, 5,6kgAvailable Beam Angles: 6°, 15°, 25°, 38° / asymmetric Operating Ambient Temp Range: -20°C/+40°CImpact Rating: IK 07 Operating Temp: 53°C @ Ambient 40°CIngress Protection Rating: IP65 LED Colour Variants: WW, CW, NWLight Source: High power LEDs Warm White LEDs: 3300 KLED Life Expectancy: Min 60000 Hrs Cool White LEDs: 6500 KTypical Lumen Maintenance: 70% @ 60000 hrs Cooling System: ConvectionConstruction: precision extruded aluminium Cable Type: H05 RN-F 3x0,75 L=1500Transparent cover-tempered glass
65
variable distance
408/586/1208/1475
1211 66
95
4352
variable distance 1208408/586/ /1475
07
new
Gold Coast Convention & Exibition Centre - Gold Coast Queensland, Australia (Photo credits: ULA)
The Anolis ArcLine combines state of the art lighting technology with a balanced design profile to create truly specifier class lighting systems. Using only the finest materials and precision manufacturing techniques the Anolis ArcLine
provides the professional solution for your lighting requirements. ArcLine is avaialble either with or with out precision primary optics allowing for a diverse range of effects to be achieved.
When greater flexibility is required Anolis ArcLink utilizes the same leading edge LED technology as ArcLine and ArcLine Optic but in a smaller footprint package allowing for use in the widest variety of installations. Avaialble in a range
of colour configurations in both optic and non optic formats ArcLink provides a truly flexible solution.
The Anolis ArcLine combines state of the art lighting technology with a balanced design profile to create truly specifier class lighting systems. Using only the finest materials and precision ma-nufacturing techniques the Anolis ArcLine provides the professional solution for your lighting requirements. Spectacular combinations of smooth color mixing is ensured by new generation of Cree multichip LED technology that allows the best homogeneous colour distribution and preci-se single point of color emission for enhanced viewing perception. Combined with high light output and long lumen maintenance together with customizable color variant, pixel pitch and length of the line, the Anolis ArcLine redefines the standard for any modern lighting specifications.
ArcL
ine
Indo
or, A
rcLi
nk
ArcLine 20 MC, 40 MC
ArcLine 20, 40 MCTM Power Supply Required: Construction: precision extruded aluminium - ArcPower 36, 72, 144, 360, RackMount384 Transparent cover-frosted glassMax Power Consumption: 22W / 44W Fixing Method: Mounting BracketAvailable Beam Angles: non optics (98°) Product Weight: 0.9 kg / 1.7 kgIngress Protection Rating: IP2X Operating Ambient Temp Range: -20°C/+40°CLight Source: High power MC (Multi-Chip) Operating Temp: 53°C @ Ambient 40°CLED Life Expectancy: Min 60000 Hrs LED Colour Variants: RGBWTypical Lumen Maintenance: 70% @ 60000 hrs Cooling System: Convection Cable Type: Cat 5e 1.5m with RJ45 male connector
DIMENSIONS (in mm):
new
35
WW
W.A
NO
LIS.
EU
This precision high quality optical system offers interchangeable lens options, ranging from the narrowest to the widest angles for multiple applications. A combination of superior colour mixing and smooth light dispersion results in superior uniform colour output.The spectacular performance of the colour mixing system is ensured utilising the new generation of Cree multichip LEDs. This allows the best homogeneous colour distribution and most precise single-point-of-colour emission. High light output and longevity of the LEDs together with customisable colour variants sees the Anolis ArcLine redefining standards for any modern lighting specification
ArcLine Optic 20 MC, 40 MC
ArcL
ine
Indo
or, A
rcLi
nk
ArcLine Optic 20, 40 MCTM Power Supply Required: Construction: precision extruded aluminium - ArcPower 36, 72, 144, 360, RackMount384 Transparent cover-clear glassMax Power Consumption: 22W / 44W Fixing Method: Mounting BracketAvailable Beam Angles: 27°, 36°, 21°x 36° Product Weight: 1.1 kg / 1.9 kgIngress Protection Rating: IP2X Operating Ambient Temp Range: -20°C/+40°CLight Source: High power MC (Multi-Chip) Operating Temp: 53°C @ Ambient 40°CLED Life Expectancy: Min 60000 Hrs LED Colour Variants: RGBWTypical Lumen Maintenance: 70% @ 60000 hrs Cooling System: Convection Cable Type: Cat 5e 1.5m with RJ45 male connector
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
new
WW
W.A
NO
LIS.
EU
36
The Anolis ArcLine combines state of the art lighting technology with a balanced design profile to create truly specifier class lighting systems. Using only the finest materials and precision manufacturing techniques the Anolis ArcLine provide the professional solution for your lighting requirements. The highest quality wide angle LEDs ensures that a constant effect is delivered in the widest range of application possibilities. Utilizing high powered LEDs the Anolis ArcLine is unsurpassed in performance, reliability and quality.
ArcLine 12, 18, 24, 36
ArcL
ine
Indo
or, A
rcLi
nk
ArcLine 12, 18, 24, 36TM Power Supply Required: Construction: precision extruded aluminium - ArcPower 36, 72, 144, 360, RackMount384 Transparent cover-frosted glassMax Power Consumption: 13.6W /20.4W /27.2W /40.8W Fixing Method: Mounting BracketAvailable Beam Angles: non optic (120°) Product Weight: 0,6kg / 0,8kg / 1,0kg / 1,5kg Ingress Protection Rating: IP2X Operating Ambient Temp Range: -20°C/+40°CLight Source: High power LEDs Operating Temp: 50°C @ Ambient 25°CLED Life Expectancy: Min 60000 Hrs LED Colour Variants: RGB,WW,CW (depend on request)Typical Lumen Maintenance: 70% @ 60000 hrs Cooling System: Convection Cable Type: Cat 5e 1.5m with RJ45 male connector
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
37
WW
W.A
NO
LIS.
EU
The Anolis ArcLine Optic range combines state of the art lighting technology with a balanced design profile to create truly specifier class lighting systems. Using only the finest materials and precision manufacturing techniques the Anolis ArcLine provides the professional solution for your lighting requirements.
The highest quality wide angle LEDs ensures that a constant effect is delivered in the widest range of applications possibilities. Utilizing high powered LEDs the Anolis ArcLine Optic range is unsurpassed in performance, reliability and quality.
ArcLine Optic 12, 18, 24, 36
ArcL
ine
Indo
or, A
rcLi
nk
ArcLine Optic 12, 18, 24, 36TM Power Supply Required: Construction: precision extruded aluminium - ArcPower 36, 72, 144, 360, RackMount384 Transparent cover-clear glassMax Power Consumption: 13.6W /20.4W /27.2W /40.8W Fixing Method: Mounting BracketAvailable Beam Angles: 6°, 15°, 25°, 38° / asymmetric Product Weight: 0.75kg 1.05 kg 1.3 kg 1.9 kgIngress Protection Rating: IP2X Operating Ambient Temp Range: -20°C/+40°CLight Source: High power LEDs Operating Temp: 50°C @ Ambient 25°CLED Life Expectancy: Min 60000 Hrs LED Colour Variants: RGB,WW,CW (depend on request)Typical Lumen Maintenance: 70% @ 60000 hrs Cooling System: Convection Cable Type: Cat 5e 1.5m with RJ45 male connector
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
WW
W.A
NO
LIS.
EU
661 635
When colour rendering is of high importance the ArcLine Optic Smart White provides the solution combining both warm white and cold white high powe-red LEDs. With Anolis digital control a full range of white light from 3200K to 6500K can be achieved.
All this technology is combined with the balanced design profile of the Anolis ArcLine Optic with the highest quality optics to create truly versatile linear lighting system whatever the environment demands.
ArcLine SmartWhite 12, 18, 24, 36 ArcLine Optic SmartWhite 12, 18, 24, 36TM Power Supply Required: Fixing Method: Mounting Bracket - ArcPower SW 36, 72, 144, 360, RackMount384 Product Weight: 0.75kg 1.05 kg 1.3 kg 1.9 kgMax Power Consumption: 13.6W /20.4W /27.2W /40.8W Operating Ambient Temp Range: -20°C/+40°CAvailable Beam Angles: non optic or 6°, 15°, 25°, 38° / asymmetric Operating Temp: 50°C @ Ambient 25°CIngress Protection Rating: IP2X LED Colour Variants: WW,CW,SmartWhiteLight Source: High power LEDs Warm White LEDs: 3300 KLED Life Expectancy: Min 60000 Hrs Cool White LEDs: 6500 KTypical Lumen Maintenance: 70% @ 60000 hrs Cooling System: ConvectionConstruction: precision extruded aluminium Cable Type: Cat 5e 1.5m with RJ45 male connectorTransparent cover-frosted or clear glass
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
39
WW
W.A
NO
LIS.
EUAr
cLin
e In
door
, Arc
Link
The perfect companion to the ArcLine range ArcLink adds a flexible di-mension to linear LED lighting combining the latest high powered LEDs with simple CAT 5 connection and complete with heat sink for thermal manage-ment. The compact ArcLink can be installed virtually anywhere, including curved alcove lighting and even concealed within furniture or fittings.
ArcLink 3, 4 ArcLink Optic 3, 4
ArcLink Optic 3, 4TM Power Supply Required: Construction: aluminum base - ArcPower 16x6, 16x12, 36, 72, 144, 360, RackMount384 Product Weight: 0.06 kgMax Power Consumption: 3,4 W / 4,5 W Operating Ambient Temp Range: -20°C/+40°CAvailable Beam Angles: 6°, 15°, 25°, 38° / asymmetric Operating Temp: 50°C @ Ambient 25°CIngress Protection Rating: IP2X LED Colour Variants: R,G,B,A,CW,WW,RGBW (depend on request)Light Source: High power LEDs Cooling System: ConvectionLED Life Expectancy: Min 50000 Hrs Accessories: patch cables, termination plugTypical Lumen Maintenance: 70% @ 50000 hrs Power & Data plug: RJ45
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
29
126
140.6
5.5
24.4
109.6
134.4
24
165.3
150.7
33
5.5
ArcLink 3 ArcLink Optic 3
ArcLink 4 ArcLink Optic 4
ArcLink 3, 4TM Power Supply Required: Construction: aluminum base - ArcPower 16x6, 16x12, 36, 72, 144, 360, RackMount384 Product Weight: 0.05 kgMax Power Consumption: 3,4 W / 4,5 W Operating Ambient Temp Range: -20°C/+40°CAvailable Beam Angles: non optic (120°) Operating Temp: 50°C @ Ambient 25°CIngress Protection Rating: IP2X LED Colour Variants: R,G,B,A,CW,WW,RGBW (depend on request)Light Source: High power LEDs Cooling System: ConvectionLED Life Expectancy: Min 50000 Hrs Accessories: patch cables, termination plugTypical Lumen Maintenance: 70% @ 50000 hrs Power & Data plug: RJ45
The Anolis ArcDot is a RGBW highpowered multichip fixture. The unit‘s high light output can be pixel mapped and therefore be controlled and used for large scale matrix applications, as well as used for individual
illuminating needs. It features an integrated intelogent, electronic control system that guarantees flicker free driving, overheat protection and together with remote addressing, calibration and status messaging with power supply unit
it ensures easy remote maintenance and long term reliability. IP65 rated precision turned aluminum housing with frosted UV stable polycarbonate dome allows flexible solutions to both interior and exterior environments.
ArcDot connection | Pg. 43
ArcDot | Pg. 42
ArcD
ot
ArcDot DMX
ArcDot 1
ArcDot 2
ArcDot 25
ArcDot 26
ArcDot 34
ArcDot 50
Robe Media Server
ArcDotPower
WW
W.A
NO
LIS.
EU
42
The Anolis ArcDot is a Cree MC-E RGBW multichip based high powered mul-ticolored LED fixture. The unit‘s high light output can be pixel mapped and therefore be controlled and used for large scale matrix applications, as well as used for individual illuminating needs. It features an integrated intelligent electronic control system that guarantees flicker free driving, overheating protection and together with remote addressing, calibration and status mess-aging with power supply unit it ensures easy remote maintenance and long term reliability. IP65 rated precision turned aluminum housing with frosted UV stable polycarbonate dome allows flexible solutions to both interior and exterior environments.
ArcDot
ArcD
ot
ArcDotTM ArcDot PowerTM Power Supply Required: ArcDot Power & Robe Media Server Max.100 ArcDots; 4 zones (max.35 ArcDots per each zone)Max Power Consumption: 5,5 Watt / 48 V DC 580 W / 48 V DCMax.Current per colour 520 mA ArtNet / DMX inputInternal chip protection against overheating Control via Robe Media Server,PC software or DMX consoleFlicker-free operation Intelligent power and data distribution (4 universes), individually driven each ArcDot-pixel)Status messages for communication with power supply unit Independent addresing of ArcDotsIngress Protection Rating: IP67 Parallel or Daisy Chain Connection of ArcDotsLight Source: High power MC (Multi-Chip) RGBW Distance ArcDot Power > ArcDot can be max.100 meters { 25 ArcDots per one output }LED Life Expectancy: Min 50000 Hrs Typical Lumen Maintenance: 70% @ 50000 hrs Construction: die cast Dome: frosted polycarbonate Product Weight: 0.2 kg Operating Ambient Temp Range: -20°C/+50°C Operating Temp: 35°C @ Ambient 25°C Power & Data plug: three pin IP68 connectors 110 mm long Cooling System: Convection
67
Ø 66
67
292
310
326
250330,5
94
5
7
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
new
43
WW
W.A
NO
LIS.
EU
ArcDot connection
ArcD
ot
ArcDot 1
ArcDot 2
ArcDot 25
ArcDot 51
ArcDot 52
ArcDot 75
Robe Media Server
ArcDotPower
ArcDot 26
ArcDot 27
ArcDot 50
ArcDot 76
ArcDot 77
ArcDot 100
Connection option 1: Connection option 2:
College Michel-de-Swaen - Dankerque, France
ArcPower 16x6, 16x12 | Pg. 50
ArcPower 48 TC/4x48 TC | Pg. 49
The Anolis range of LED lighting fixtures is brought to life with power and control via the ArcPower range. Manufactured from only the highest quality components the ArcPower range produce both the performance and reliability required for modern lighting solutions.
Using industry standard protocols such as DMX 512 and RS232 along with globally recognised RJ45 connectors the ArcPower range is the lighting designer’s perfect solution.
ArcPower 48 | Pg. 51
ArcPower 24 TC/4x24 TC | Pg. 48
ArcPower 36/K2, 72/K2 | Pg. 54
ArcPower 36, 72, 144, 360 SmartWhite | Pg. 47
ArcSplitter 4, 2x12 | Pg. 53
ArcPower 36/K2 SmartWhite | Pg. 55
72/K2 SmartWhite
ArcPower 36, 72, 144, 360 | Pg. 46
ArcPower 384 Rack-Mount | Pg. 52
ArcPower‘s Summary sheet | Pg. 62
ArcPower
ArcP
ower
WW
W.A
NO
LIS.
EU
46
ArcP
ower The Anolis range of LED lighting fixtures is brought to life with power and control via
the ArcPower range. Manufactured from only the highest quality components the ArcPower range produces both the performance and reliability required for modern lighting solutions. Using industry standard protocols such as DMX 512 and RS232 along with globally recognised RJ45 connectors the ArcPower range is the lighting designer’s perfect solution.
ArcPower 36, 72, 144, 360
ArcP
ower
ArcPower 36TM ArcPower 72TM
Input Voltage: 100-240 V AC, 50/60 100-240 V AC, 50/60 Maximum Power Consumption: 60 W 120 WNumber of LED output zones: 1 2Max. Output current: 350 mA per colour 350 mA per colour Max. load per zone (variants): 36 x 1 W LED´s in RGB mode 36 x 1 W LED´s in RGB mode 42 x 1 W LED´s in RGBW mode 42 x 1 W LED´s in RGBW mode 10 x MC-E LED´s in RGBW mode 10 x MC-E LED´s in RGBW mode Total load: 36 x 1 W LED´s in RGB mode 72 x 1 W LED´s in RGB mode, 42 x 1 W LED´s in RGBW mode 84 x 1 W LED´s in RGBW mode 10 x MC-E LED´s in RGBW mode 20 x MC-E LED´s in RGBW mode Control: USITT DMX 512, DyNet, RS232 USITT DMX 512, DyNet, RS232DMX channels: 3,4,6,7 4,6,8,11DMX protocol modes: 5 4Operation modes: DMX, Mast./slave, Stand-alone DMX, Mast./slave, Stand-aloneBuilt-in programs: 10 6User editable programs: 3 (up to 50 steps each) 3 (up to 30 steps each)Display: 3 digit LED 3 digit LEDDMX connection: RJ45 RJ45RS232 connection: DE-9 (male) DE-9 (male)LED output connection: RJ45 RJ45Operating temperature range: -10°C/+40°C -10°C/+40°C Weight: 1.1 kg 1.8 kg
ArcPower 144TM ArcPower 360TM
100-240 V AC, 50/60 100-240 V AC, 50/60 240 W 600 W4 10350 mA per colour 350 mA per colour 36 x 1 W LED´s in RGB mode 36 x 1 W LED´s in RGB mode 42 x 1 W LED´s in RGBW mode 42 x 1 W LED´s in RGBW mode10 x MC-E LED´s in RGBW mode 10 x MC-E LED´s in RGBW mode 144 x 1 W LED´s in RGB mode, 360 x 1 W LED´s in RGB mode,168 x 1 W LED´s in RGBW mode 420 x 1 W LED´s in RGBW mode40 x MC-E LED´s in RGBW mode 100 x MC-E LED´s in RGBW mode USITT DMX 512, DyNet, RS232 USITT DMX 512, DyNet, RS2324,12,16,19 4,5,30,40,434 5DMX, Mast./slave, Stand-alone DMX, Mast./slave, Stand-alone6 63 (up to 30 steps each) 3 (up to 30 steps each)3 digit LED 3 digit LEDRJ45 RJ45DE-9 (male) DE-9 (male)RJ45 RJ45-10°C/+40°C -10°C/+40°C 2.9 kg 6.3 kg
ArcPower 36 ArcPower 72 ArcPower 144 ArcPower 360
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
47
WW
W.A
NO
LIS.
EU
The ArcPower 36, 72, 144 SmartWhite bring to life the Anolis SmartWhite range of LED lighting fixtures. Electronic dimming of the individual white channels allow smooth fading through a range of colour temperatures available,allowing for precise control of the colour rendering for the widest range of applications. Using industry standard protocols such as DMX 512 and RS232 along with globally recognised RJ45 connectors again the ArcPower SmartWhite range is the lighting designer’s perfect solution for variable white light applications.
ArcPower 36, 72, 144, 360 SmartWhite
ArcP
ower
ArcPower 36 SWTM ArcPower 72 SWTM
Input Voltage: 100-240 V AC, 50/60 Hz 100-240 V AC, 50/60 HzMaximum Power Consumption: 60 W 120 WNumber of LED output zones: 1 2Max. Output current: 350 mA per colour 350 mA per colourMax. load per zone: 36 x 1 W LED´s in RGB mode 36 x 1 W LED´s in RGB mode 42 x 1 W LED´s in RGBW mode 42 x 1 W LED´s in RGBW modeTotal load: 36 LED´s in RGB mode 72 LED´s in RGB mode, 42 LED´s in RGBW mode 84 LED´s in RGBW modeControl: USITT DMX 512, DyNet, RS232 USITT DMX 512, DyNet, RS232DMX channels: 2,1,2,4,3 4,1,3,6,3,6DMX protocol modes: 5 6Operation modes: DMX, Mast./slave, Stand-alone DMX, Mast./slave, Stand-aloneBuilt-in programs: 10 6User editable programs: 3 (up to 50 steps each) 3 (up to 30 steps each)Display: 3 digit LED 3 digit LEDDMX connection: RJ45 RJ45RS232 connection: DE-9 (male) DE-9 (male)LED output connection: RJ45 RJ45Operating temperature range: -10°C/+40°C -10°C/+40°CWeight: 1.1 kg 1.8 kg
ArcPower 144 SWTM ArcPower 360 SWTM
100-240 V AC, 50/60 Hz 100-240 V AC, 50/60 Hz240 W 600 W4 10350 mA per colour 350 mA per colour36 x 1 W LED´s in RGB mode, 36 LEDs in RGB mode,42 x 1 W LED´s in RGBW mode 42 LEDs in RGBW mode144 LED´s in RGB mode, 360 LED´s in RGB mode,168 LED´s in RGBW mode 420 LED´s in RGBW modeUSITT DMX 512, DyNet, RS232 USITT DMX 512, DyNet, RS2328,1,5,10,3,12 20,1,11,226 4DMX, Mast./slave, Stand-alone DMX, Mast./slave, Stand-alone6 63 (up to 30 steps each) 3 (up to 30 steps each)3 digit LED 3 digit LEDRJ45 RJ45DE-9 (male) DE-9 (male)RJ45 RJ45-10°C/+40°C -10°C/+40°C2.9 kg 6.3 kg
Input Voltage: 100-240 V AC, 50/60 HzMaximum Power Consumption: 65 WNumber of LED output zones: 1Max. Output Current: 700mAMax.load: 1xArcSource 24 or 24MC (6x10W multichips)Control: DMX 512DMX channels: 2, 3, 4, 8DMX protocol modes: 4Operations modes: DMX, Stand-alone, Master/SlaveUser editable programs: 3 (up to 68 steps each)Display: 4 digit LEDDMX connection: XLR 3pin connectorLED output connection: RJ45Operating temperature range: -10°C/+40°CWeight: 1,8 kg
ArcPower 4x24 TC TM
100-240 V AC, 50/60 Hz270 W4700mA4xArcSource 24 or 24MC (24x10W multichips)USITT DMX 51212, 16, 20, 4,45DMX, Stand-alone, Master/Slave3 (up to 68 steps each)4 digit LEDXLR 3pin connectorRJ 45-10°C/+40°C3,7 kg
The latest generation of Anolis ArcSource LED luminaires are designed for the harshest range of envi-ronments, Outdoor and Inground fittings are often directly exposed to the elements, Indoor fittings can be installed in equally as demanding situations with that in mind the new Anolis ArcPower TC has been introduced. Internal electronics ensure that regardless of the environmental conditions the connected fittings will run at optimum performance. In keeping with the existing ArcPower range only the finest quality components are used in the manufacturing process. The implementation of industry standard protocolDMX 512 combined with built internal programming ensures a wide range of compatibility, CAT5 connectivity makes for easy plug and play installation, the ArcPower TC range is the obvious solution for todays demanding LED lighting specifications.
ArcPower 24 TC/4x24 TC
ArcP
ower
310
326
55
ArcPower 4x24 TC ArcPowe 24 TC
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
new
49
WW
W.A
NO
LIS.
EU
310
326
55
ArcPower 48 TCTM
Input Voltage: 100-240 V AC, 50/60 HzMaximum Power Consumption: 130 WNumber of LED output zones: 1Max. Output Current: 700mAMax.load: 1xArcSource 48 or 48MC (12x10W multichips)Control: DMX 512DMX channels: 2, 3, 4, 8DMX protocol modes: 4Operations modes: DMX, Stand-alone, Master/SlaveUser editable programs: 3 (up to 68 steps each)Display: 4 digit LEDDMX connection: XLR 3pin connectorLED output connection: RJ45Operating temperature range: -10°C/+40°CWeight: 1.8 kg
ArcPower 4x48 TCTM
100-240 V AC, 50/60 Hz520 W4700mA4xArcSource 48 or 48MC (48x10W multichips)USITT DMX 51212, 16, 20, 4,45DMX, Stand-alone, Master/Slave3 (up to 68 steps each)4 digit LEDXLR 3pin connectorRJ 45-10°C/+40°C5,5 kg
The latest generation of Anolis ArcSource LED luminaires are designed for the harshest range of envi-ronments, Outdoor and Inground fittings are often directly exposed to the elements, Indoor fittings can be installed in equally as demanding situations with that in mind the new Anolis ArcPower TC has been introduced. Internal electronics ensure that regardless of the environmental conditions the connected fittings will run at optimum performance. In keeping with the existing ArcPower range only the finest quality components are used in the manufacturing process. The implementation of industry standard protocolDMX 512 combined with built internal programming ensures a wide range of compatibility, CAT5 connectivity makes for easy plug and play installation, the ArcPower TC range is the obvious solution for todays demanding LED lighting specifications.
ArcPower 48 TC/4x48 TC
ArcP
ower
ArcPowe 4x48 TC ArcPowe 48 TC
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
new
WW
W.A
NO
LIS.
EU
50
ArcPower 16x6TM
Input Voltage: 100-240 V AC, 50/60 HzMaximum Power Consumption: 170 WNumber of LED output zones: 16, 16 /12 (MC-E in RGBW mode)Max.Output current: 350 mA per colourMax. load per zone: 16x6 LEDs (RGB mode), 12x2 (MC-E LEDs in RGBW mode) 12x8 LEDs (RGBW mode)Max. load per one channel : 2 LED´s, 2 MC-E in RGBW modeTotal load: 96 LED´s , 24 MC-E LED´s in RGBW modeControl: USITT DMX 512DMX channels: 48, 50DMX protocol modes: 2Operation modes: DMX, Stand-aloneBuilt-in programs: 5User editable programs: 4 (up to 60 steps each)Display: 4 digit LEDDMX connection: RJ45LED output connection: RJ45Operating temperature range: -10°C/+40°CWeight: 2 kg
ArcPower 16x12TM
100-240 V AC, 50/60 Hz170 WA12 - RGB mode, 16 - RGBW mode350 mA per channelMax. load per zone: 16 LEDs in RGB mode, 12 LEDs in RGBW mode4 LED´s, min 2 MC-E - max 4 MC-E in RGBW mode192 LED´s, 48 MC-E in RGBW modeUSITT DMX 51248, 502DMX, Stand-alone54 (up to 60 steps each)4 digit LEDRJ45RJ45 -10°C/+40°C2 kg
When individual fixture control is required the ArcPower 16 x 6 comes into its own. With 16 separately DMX addressable outputs the ArcPower 16 x 6 can be used to control complex patterns and matrixes. Each output is able to power up to 6 LEDs making this the perfect control option for: ArcSource 3/6/Inground/Outdoor as well as ArcLink 3 RGB. With built in programs and user editable programs the ArcPower 16 x 6 can be linked to further units and operated in a master/slave configuration. The ArcPower 16 x 6 can also be linked via DMX to the other ArcPower units in the range.
The ArcPower has been designed and manufactured to the same high standards as the ArcPower 36 to bring to life the phenominal ArcPad 48 range. Delivering the perfect balanced power to the ArcPad 48’s rebel LEDs the ArcPower 48 means that ArcPads are able to be seamlessly integrated into installations combining other Anolis products.
Multi connectivity including DMX, RS232, and Dynet via industry standard CAT5 connections means ArcPower 48 is easily interfaced with the widest variety of standard lighting control systems.
ArcPower 48
ArcP
ower
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
WW
W.A
NO
LIS.
EU
52
ArcPower 384 Rack-MountTM
Power supply: Electronic auto-rangingInput Voltage: 100-240 V AC, 50/60 HzMaximum Power Consumption: 520W (350mA load), 1200W (700mA load)Number of LED output zones: 8Max. Output current: 350mA or 700mAMax. load per zone: 36 LED´s in RGB mode, 48 LED´s in RGBW mode, 12 MC-E in RGBW modeTotal load: 288 LED´s in RGB mode, 384 LED´s in RGBW mode, 96 MC-E in RGBW modeControl: USITT DMX 512 (RDM support), Art-Net (ready for ACN), DyNet, RS232DMX channels: 4, 5, 24, 32, 35DMX protocol modes: 5Operation modes: DMX, Stand-aloneUser editable programs: 3 (up to 99 steps each)Display: Blue/white LCD graphicSetting & Addressing: Anolis Navigation System (ANS)Connections: DMX IN/OUT: Locking 3-pin and 5-pin XLR Dynet: RJ45 ArtNet: RJ45 RS232: DE-9 (male) AC power input: Neutrik PowerCon, A-type, NAC3MPAMaximum ambient operating temperature: +40°CMounting: 19“ Rack-Mount (2U)Weight: 7.5 kg
With many of today’s LED installations becoming more and more technically demanding the ArcPower 348 Rack Mount sets new standards in LED driver technology. Offering 8 individually controllable outputs, ArcPower 384 Rack Mount is compatible with DMX, RDM (remote device management), Art Net and DyNet allowing the widest range of flexibility with advanced LED installations. High quality components and Anolis custom software ensures the highest level of reliability that has become a standard with the rest of the Anolis ArcPower range. A graphic display panel combined with the ANS (Anolis Navigation System) makes accessing the functions of the ArcPower 384 Rack Mount a simple and intuitive experience. Demanding installation such as, Shopping Malls, Entertainment Complexes, Stadiums, Museums, Theme Parks and Virtually all high specifications LED installations can benefit from the huge flexibility of the Anolis ArcPower 384.
ArcPower 384 Rack-Mount
ArcP
ower
RACK 580
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
53
WW
W.A
NO
LIS.
EU
ArcSplitter 4TM ArcSplitter 2x12TM
Number of LED outputs: 4 2x12LED in/out: RJ 45 sockets RJ 45 socketsConstruction: No extra PSU needed No extra PSU needed Sheet metal housing Sheet metal housingFixation: 2 mounting holes 4 mounting holes with diameter of 5 mm with diameter of 5 mmWeight: 0.5 kg 1.9 kg
Standard and Rack mounting version available.
The ArcSplitter unit splits LED outputs of the ArcPower drivers into several branches. The ArcSplitter allows cabling of multiple LED modules more easily and faster. Small and compact in design, mounting holes in the unit´s housing allows easy installation without extra PSU needed. All splitters are equipped with RJ45 sockets for data input/output. The ArcSplitter 4 splits one LED output of the ArcPower driver into 4 branches. The ArcSplitter 2x12 splits two LED outputs of the ArcPower driver into 12 branches each.
ArcSplitter 4, 2x12
ArcP
ower
ArcSplitter 4 ArcSplitter 2x12
TECHNICAL SPECIFICATIONS:
DIMENSIONS (in mm):
WW
W.A
NO
LIS.
EU
54
ArcPower 36/K2TM ArcPower 72/K2TM
Input Voltage: 100-240 V AC, 50/60 Hz 100-240 V AC, 50/60 HzMaximum Power Consumption: 120 W 240 WNumber of LED output zones: 1 2Max. Output current: 700 mA per colour 700 mA per colourMax. load per zone: 36 x K2 or 3W LED´s in RGB mode, 36 x K2 or 3W LED´s in RGB mode, 42 x K2 or 3W LED´s in RGBW mode 42 x K2 or 3W LED´s in RGBW mode 10 MC-E in RGBW mode 10 MC-E in RGBW modeTotal load: 36 LED´s in RGB mode, 72 LED´s in RGB mode, 42 LED´s in RGBW mode 84 LED´s in RGBW mode 10 MC-E in RGBW mode 20 MC-E in RGBW modeControl: USITT DMX 512, DyNet, RS232 USITT DMX 512, DyNet, RS232DMX channels: 3, 4, 6, 7 4, 6, 8, 11DMX protocol modes: 5 4Operation modes: DMX, Mast./slave, Stand-alone DMX, Mast./slave, Stand-aloneBuilt-in programs: 10 6User editable programs: 3 (up to 50 steps) 3 (up to 50 steps]Display: 3 digit LED 3 digit LEDDMX connection: RJ45 RJ45RS232 connection: DE-9 (male) DE-9 (male)LED output connection RJ45 RJ45Operating temperature range: -10°C/+40°C -10°C/+40°CWeight: 1.8 kg 2.9 kg
When the high output Anolis poducts 700mA range needs power and control the ArcPower 36/K2 or ArcPower 72/K2 can be used to all effects. Utilising the industry standard CAT5 connectors and including built in pre programs as well as on board programming, DMX 512 and RS232 inputs the ArcPower 36/K2 and ArcPower 72/K2 can be integrated with ease into virtually any lighting control system.
Input Voltage: 100-240 V AC, 50/60 Hz 100-240 V AC, 50/60 HzMaximum Power Consumption: 120 W 240 WNumber of LED output zones: 1 2Max. Output current: 700 mA per internal channel 700 mA per internal channelMax. load per zone: 36 x Luxeon K2 LED´s 36 x Luxeon K2 LED´sTotal load: 36 LED´s 72 LED´sControl: USITT DMX 512, DyNet protocol, RS232 USITT DMX 512, DyNet protocol, RS232DMX channels: 1, 2, 4 1, 3, 4, 6DMX protocol modes: 5 6Operation modes: DMX, Master/slave, Stand-alone DMX, Master/slave, Stand-aloneBuilt-in programs: 2 2User editable programs: 1 (up to 50 steps) 1 (up to 30 steps)Display: 3 digit LED 3 digit LEDDMX connection: RJ45 RJ45RS232 connection: DE-9 (male) DE-9 (male)LED output connection: RJ45 RJ45Operating temperature range: -10°C/+40°C -10°C/+40°CWeight: 1.8 kg 2.9 kg
The ArcPower36/K2, 72/K2 SmartWhite represent ideal drivers for Anolis 700mA LED modules. Specific property of the drivers – electronic dimming of the individual white channels - allows smooth fading through range of available colour temperatures allowing for precise control of the colour rendering for applications in the decorative and architectural lighting fields.
Utilizing the industry standard CAT5 connectors, user-friendly programmability, DMX 512/RS232 inputs as well as support of DyNet protocol both drivers can be easily integrated with any lighting systems.
Private House - Sovereign Island, Gold Coast, Australia (Photo credits: ULA)
When control simplicity is required the Anolis ArcControl 1 provides the perfect user interface, allowing access to 4 full range dimming as well as predefined scrolling for RGB installations. Its compact size means it fits into worldwide single
gang wallplates. A perfect control companion for Hotel guest rooms, domestic installations, bars and restaurants.
Anolis ArcControl 1024 is a feature-rich, fully programmable DMX controller, designed to offer comprehensive and intuitive control of all Anolis fittings as well as third party DMX controlled luminieres. It is ideal for the widest
possible range of applications including commercial and residential installations - restaurants, bars, hotels, modern interiors, lightscapes, retail outlets, point-of-sales, illuminated signs and exhibition stands.
ArcControl 128 | Pg. 59
Cyber Arch | Pg. 61
ArcControl 1 | Pg. 58
ArcControl 1024 | Pg. 60
ArcControl
ArcC
ontr
ol
WW
W.A
NO
LIS.
EU
O72
43
The ArcControl 1 is a standard wall mounted playback 512 DMX controller. The compact component size of the electronic heart of the ArcControl 1 means it can be mounted to any standard back box UK/European or USA. LED back-lit front panel with 12 buttons offers adaptable 7 colors color mixing, dimmer control, and together with 2 built-in programs it provides an easy and convenient controlling option for architectural and small venue installations. Ideal for multipoint controlling environments such as hotel rooms, hallways or stairways.
58
ArcControl 1
ArcC
ontr
ol
Arc Control 1TM Power supply: 12V DC/15mA (from ArcPower drivers)Compatible drivers: ArcPower 36 /72 /144 /360 (and their K2 variants)Protocol: USITT DMX 512, DyNet12 control buttonsPre-set 7 colours (red, green, blue, cyan, magenta, yellow, white)Light intensity controlPower/DMX Connection: self-locking terminalsBuilt-in 2 programs, fast and slow program runningMounting: into KU 68 universal boxDimensions - panel (H x W x D): 18.4mm x 80.5mm x 80.5mmDimensions – KU 68 box (H x Diameter): 43mm x 72 mm
PC requirement: Windows XP/VISTA/SEVEN 32/64 bits and USB 2.0Software: ArcControl 128 (Supplied on a USB stick)Versions: Black, WhiteConnections: Power (2pins); DMX (3pins); Micro-USBChannels:128max.(dependsonQTYofsteps)Power: from 5.5V to 12V DCAmbient operating temperature: 0°C to 50°CKeypad dimensions: 86x86x10 mmKeypad weight: 130gIP rating: IP20Package: ArcControl 128, USB stick with software, USB cable, connector blockOptional accessories: AC/DC adapter
ArcControl 128 brings the dimmer switch into the 21st century, the simple glass touch interface is backed by world leading lighting control software which allows creative programming for all types of applications. The 3 basic modes colour, scene and dimmer allow the user to precisely control dramatic scenes. Programable via PC connected directly via micro USB the ArcControl 128 allows the user complete flexibility. The sleek glass touch interface is both aesthetically pleasing as well as being intuitive and therefore easy to use. Via DMX, ArcControl 128 is ready to connect to all Anolis systems, keeping the user in complete control.“ Applications include Architectural, Retail, Domestic, Leisure and Entertainment
ArcControl 128
ArcC
ontr
ol
TECHNICAL SPECIFICATIONS: PC REQUIREMENT:
www.anolis .eu
86
86
10
40
27
DIMENSIONS (in mm):
new
WW
W.A
NO
LIS.
EU
60
ArcControl 1024
ArcC
ontr
ol
ArcControl 1024TM
DMX Channels: 2 complete universes of 512 channels eachDMX Standard: DMX 1990 ADMX refresh rate: Configurable, 36 Hz MaxPower Supply: 15 V DC, 300 mA, (included)Networking: Ethernet 10/100 MHz - Auto uplink detection Built-in web server Telnet command serverAnalogue channels: 3 independent 0-10 V outputs, 50 mAContact inputs: 3 volt-free contact inputsAudio Input: Line-level mono audio input for beat triggeringReal-time clock: Built-in real-time clock, with 6-month battery back-upLCD Screen: 128x64 pixel, monochrome with configurable RGB backlightPhysical Size: 35 mm deep, Fits standard 47 mm-deep UK double-gang backboxWeight: 255 grammes, without fasciaStandard Fascia: Stainless Steel
Anolis ArcControl 1024 is a feature-rich, fully programmable DMX controller, designed to offer comprehensive and intuitive control of all Anolis fittings as well as third party DMX controlled luminaires. It is ideal for the widest possible range of applications including commercial and residential installations - restaurants, bars, hotels, modern interiors, lightscapes, retail out-lets, point-of-sales, illuminated signs and exhibition stands. Anolis ArcControl 1024 is a totally stand-alone system and is wall-mounted. It requires no additional equipment to control DMX fittings and fits neatly into a 47 mm deep back box. Surface mount and frame mount options are also available. Anolis ArcControl 1024 includes a comprehensive library of all Anolis luminaires and other effects for easy installation and programming. The LCD display and scroll-wheel combined with the real time astronomical clock allows for more complex sequences, timed events and colours to be added without requiring the use of a computer.
Second generation of the Cyber Control software contains many new and improved features and functions, including support for both 32/64-bit computer versions, new Easy Stand Alone PRO software and newly designed hardware interfaces with more XLR connectors, SD Card data storage, real time clock and others.
Cyber Arch is using a new USB-DMX interface with two 512 DMX-out channels and miniSD CARD memory. Designed especially for architectural installations, it allows easy control of ligh-ting within a variety of places such as homes, hotels, restaurants, fountains, gardens, and many more
